ADJUSTABLE ® BeveLEDmini Trimless 2433 PROJECT INFORMATION ® WARM GLOW DIMMING PROJECT * DATE Covered By US Patent 8,456,109 and 8,581,520 TYPE 1" REGRESS BeveLED mini Warm Glow Dimming Trimless Recessed Adjustable - Gradually transitions from 2700K, 3000K or 3500K down to 2200K, creating intimacy while enhancing the mood and feeling of space. 1" Regress DELIVERED PERFORMANCE - Adjustable Maximum Wattage Maximum Color Temperture Color Rendering Index Lumens per Watt Source Lumens Delivered Lumens Color Consistency 12Watts 2700K 80+ 90+ 46 37 850 675 550 450 18Watts 3000K 3500K 2700K 80+ 90+ 80+ 80+ 90+ 47 40 50 41 32 900 725 975 1125 900 600 475 625 725 575 2-Step MacAdam Ellipse Bevel Finish 3000K 3500K 80+ 90+ 80+ 42 34 45 1200 950 1275 775 625 825 13⁄4" x 13⁄4" 3" x 3" Performance based on 3000K USAI Lighting’s Warm Glow Dimming Curves vs. USAI Lighting's Warm Glow Dimming Curves Actual Incandescent Dimming Curve 100% 100% 90% 90% 80% 80% 60% 60% 50% 50% 2700K 2700K 40% 40% 3000K 3000K 30% 30% 3500K 3500K LIGHT OUTPUT %% LIGHT OUTPUT 70% 70% 20% 20% Incandescent Incandescent 10% 10% 0% 0% 3500 3400 3400 3300 3300 3200 3200 3100 3100 3000 3000 2900 2900 2800 2800 2700 2700 2600 2600 2500 2500 2400 2400 2300 2300 2200 2200 3500 CORRELATEDCOLOR COLORTEMPERATURE TEMPERATURE (KELVIN) CORRELATED (KELVIN) HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: 2433W - B1 - S - 10 - LSLA3 - 8418 - WGD1 - 2722KS - 30 - NC1 - 277V - DIML2 - CB27 TRIM ORDERING INFORMATION TRIM 2433 BEVEL STYLE OPTION 2433 W Square 30º Trimless Adjustable, solite lens LENS – ______ Wet location 1 1 Wet location, use with B1 trims only. B1 BEVEL FINISH – B1 1" Regress Bevel, Painted Die Cast – S Solite (provided standard) F Frosted 10 13 21 28 RAL White Statuary Bronze Black Metalized Grey Custom Color (specify RAL #) AB1 1" Regress Bevel, Black Anodized Finish S Solite (provided standard) (Leave blank for AB1 and AC1 Bevel Styles) AC1 1" Regress Bevel, Clear Matte Anodized Finish F Frosted BeveLED Mini Optical Accessories Matrix if you want… & you have... 30° 35° beam AL20D 40° beam AL30D 45° beam AL40D 55° beam AL55D 60° beam AL80D 40x60° beam AS61D size D HOUSING ORDERING INFORMATION HOUSING CODE WATTAGE LSLA3 – LSLA3 ENGINE CODE COLOR – WGD1 – 8412 12W LED, 600 lumens 8418 18W LED, 775 lumens WGD1 – USAI Lighting 30 HOUSING TYPE – www.usailighting.com [email protected] VOLTAGE – NC1 New Construction 2722KS 30 2700K-2200K, 80+ CRI 30° beam CP Chicago Plenum 2 IC Insulation-Contact 3022KS Rated / Airtight 2 3000K-2200K, 80+ CRI 3522KS 3500K-2200K, 80+ CRI 2722KH 2700K-2200K, 90+ CRI 3022KH 3000K-2200K, 90+ CRI 2 Step MacAdam ellipse is standard for all ® REFLECTOR 2 Not available with EM 1126 River Road New Windsor, NY 12553 DIMMING DRIVER OPTIONS – 120V 277V ACCESSORIES – DIML2 0-10V dim, 10% (provided standard) DIML3 Lutron Hi-Lume 1% 2-wire, 120V only DIML4 Lutron Hi-Lume 1% 3-wire/ECO DIML6A EldoLED 0-10V, 0.1%, logarithmic / Lutron controls DIML6B EldoLED 0-10V, 0.1%, linear controls DIML6E EldoLED 0-10V, 1%, logarithmic/Lutron controls DIML6F EldoLED 0-10V, 1%, linear controls DIML7 EldoLED DALI, 0.1% T 845–565–8500 F 845–561–1130 CB27 CB52 EML EMLW 27” C-Channel Bars 52” C-Channel Bars Emergency battery 3 Emergency battery, wet location 3 MLXX Millwork Adapter XX=Specify Color (Millwork not wet listed) OPTICAL ACCESSORIES (Order separately) AL20D AL30D AL40D AL55D AL80D AS61D Refer to optical accessories matrix on next page for resulting beamspreads when accessory lens is combined with 30° optics 3 EM requires above ceiling access. For use with NC1 housing only. © 2014. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 07/21/2016 * ® BeveLEDmini Trimless ADJUSTABLE 2433 ® WARM GLOW DIMMING Covered By US Patents: 8,581,520 and 8,456,109 HOUSING INFORMATION New Construction Housing - NC1 IC / Airtight - IC Chicago Plenum - CP 51/2" 71/2" 5/8” to 1” 5/8”-1” 191/8" 81/2" 6 /8" 7 101/8" 12" 151/2" 11/2" 175/8" (Plan View) SPECIFICATIONS TRIM: 3" square aperture with a 1” regressed bevel, retained by two mounting clips. Die cast aluminum bevel is available in white, statuary bronze, black, and metalized grey finishes. Also available in black anodized or clear matte anodized bevel. Custom colors available (provide RAL#). TRIM LENS: 30° trim is shipped with integral solite lens. Frosted lens is available as an option. REFLECTOR: Proprietary 30° high efficiency molded optic. ADJUSTMENT: True hot aiming with center beam optics is adjustable, with a screw driver. 0°-40° lockable vertical tilt with tooless 362° lockable rotation. FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen packages: 12W (600 delivered lumens), 18W (775 delivered lumens). Engine is field replaceable through the aperture. COLOR: BeveLED mini is available in 3 color temperatures with Warm Glow dimming. All color temperatures will dim down from initial CCT at 100% output to 2200K at minimum output. All color options are tightly binned for fixture-tofixture color consistency within a 2-Step MacAdam Ellipse. 80+ color rendering index provided standard. RATED LIFE: Based on IESNA LM80-2008 50,000 hours at 70% lumen maintenance (L70). THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum LED life. Ambient temperatures at fixture location should not exceed 40°C during normal operation. USAI Lighting ® www.usailighting.com [email protected] FIELD REPLACEABLE DRIVER: 0-10V, 100%-10% DIML2 MAXIMUM CEILING THICKNESS: As per drawings dimming driver, with a high power factor provided standard above. Millwork for 1” max wood. and sources 2mA. Specify 120V or 277V. Driver complies ACCESSORY HOLDER: Snap in accessory holder with IEEE C62.41 surge protection. shipped with fixture. Accepts maximum of two DIMMING OPTIONS: Multiple dimming drivers available. accessories, size D. See compatibility chart attached. Note: DIML6A and CEILING CUT OUT: Millwork: 3-5/16" x 3-5/16" DIML6E logarithmic control are intended for use with All others: 3-1/2” x 3-1/2” Lutron control systems; DIML6B and DIML6F linear control are intended for use with non-Lutron controls. DIML6 dimming LISTINGS: Dry/Damp. Wet location option available. driver sources 2mA. NRTL/CSA-US tested to UL standards. IBEW union EMERGENCY: Emergency lighting battery pack with remote made. test switch requires above ceiling access for service. WARRANTY: 5 years Bodine 17C provides 200mA for 90 minute. EMLW wet NOTES: location option is available with B1 trim only and requires • Not for use in corrosive environment. remote test switch. EM option is available with NC1 • Use of pressure washer voids warranty. housings only. • For interior use only. MOUNTING: Butterfly brackets and adjustable nailer bars • Not for use with acoustical ceilings. with integral nails provided. Nailer bars are extendible from • Trimless for drywall installation only. 14" to 24" centers. • Millwork option for non-spackle installations. HOUSING: All-Ways Square® (covered by US Pat. No: US • Consult factory for video capture applications. 7,832,889) housing allows alignment of square aperture (up PHOTOMETRICS: Consult factory or website for IES to 20° rotation) after housing installation and prior to finish files. Tested in accordance with IESNA LM79-2008. ceiling installation. Fabricated of 20 ga. galvanized steel with thru wire J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit wiring. 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2014. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 07/21/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D2 / DIML2 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%) Manufacturer 120V / 277V Crestron Crestron Crestron Crestron Crestron Leviton Lightolier (Philips) Lutron Product D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Part Number Output Range iLux dimmer expansion module DIN Rail dimmer DIN Rail analog output module 8 Channel dimmer module 8 Channel dimmer module IllumaTech dimmer Vega Diva CLS-EXP-DIMFLV DIN-4DIMFLV4 DIN-A08 GLX-DIMFLV8 GLXP-DIMFLV8 IP710-DLX V2000FAMU DVTV-XX Qty Fixtures Per Dimmer* Use source current per fixture specification sheet to determine number of fixtures per dimmer. Max number of fixtures is limited by dimmer load rating. 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D2 / DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER FIXTURE DIMMER: 0-10V (BY OTHERS) 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GREEN GND CLASS 2 CONTROL WIRES LINE RELAY (BY OTHERS) NEUTRAL DIMMER: 0-10V w/ POWER SWITCHING D2 / DIML2 0-10V DIMMING (NO RELAY) FIXTURE (BY OTHERS) LINE 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GREEN GROUND GND NEUTRAL USAI Lighting ® www.usailighting.com [email protected] 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-2 Revised 03/22/2017 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D3 / DIML3 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D3 / DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V D3 / DIML3 Dimmer Compatibility Chart Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Product Part Number Dimmed Light Output Range Sensor+ Cabinet Unison DRd Cabinet Maestro Wireless® 600W dimmer Maestro Wireless® 1000W dimmer HomeWorks® QS adaptive dimmer HomeWorks® QS 600W dimmer HomeWorks® QS 1000 W dimmer Caseta Wireless® Pro 1000W dimmer Stanza® dimmer RadioRA® 2 adaptive dimmer RadioRA® 2 1000 W dimmer myRoom DIN power module HomeWorks® QS wallbox power module Homeworks® DIN power module HomeWorks® wallbox power module GRAFIK Eye® QS control unit GRAFIK Eye® 3000 control unit RPM-4U module RPM-4A module GP dimming panels Ariadni CL 250W dimmer Diva CL 250W dimmer Grafik T CL or RF CL dimmer Nova T CL 250W dimmer ELV10 ELV10 MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D HQRJ-WPM-6D-120LQSE-4A1-D HWI-WPM-6D-120 QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120 HW-RPM-4A-120, LP-RPM-4A-120 Various AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250- 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100%-1% 100%-1% 100%-1% 100%-1% Qty Fixtures Per Dimmer* Fixture Wattage 39W and Less 40W - 80W 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1 – 13 1–6 1–8 1–4 1–8 1–4 1 – 13 1–6 1 – 13 1–6 1–8 1–4 1–8 1–4 1–6 1–3 1–6 1–3 1 – 26 1 – 13 1–6 1–3 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1–8 1–4 1–8 1–4 1 – 10 1–5 * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D3 / DIML3 2 WIRE PHASE DIMMING FIXTURE DIMMER: 2 WIRE PHASE (BY OTHERS) LED LINE SWITCHED HOT NEUTRAL GROUND BLACK WHITE DRIVER V+ RED V- BLACK GREEN GND ONLY FOR SWITCHES WITH NEUTRAL NEUTRAL USAI Lighting ® www.usailighting.com [email protected] 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-3 Revised 03/22/2017 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4 / DIML4 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%) Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron 277V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Product D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Part Number Output Range Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Vareo Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels D20 Dimming module D20F Dimming module NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-120, PHPM-3F-DV Various 100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels D20 Dimming module D20F Dimming module NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3 DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-DV Various 100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–53 1–26 1–53 1–26 1–41 1 – 20 1–20 1 – 10 1–41 1 – 20 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–41 1 – 20 1–41 1 – 20 40W and Less 41W - 80W 1–53 1–26 1–53 1–26 1–44 1 – 22 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–20 1 – 10 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–88 1 – 44 1–88 1 – 44 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 wiring diagrams continued on next page USAI Lighting ® www.usailighting.com [email protected] 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 03/22/2017 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4 / DIML4 Continued ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%) D4 / DIML4 3 WIRE PHASE DIMMING FIXTURE DIMMER: 3 WIRE PHASE (BY OTHERS) CAP UNUSED ECOSYS WIRES DIMMED HOT SWITCHED HOT NEUTRAL LINE LED PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN GROUND DRIVER V+ RED V- BLACK GND NEUTRAL D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to Manufacturer 120V / 277V Lutron Lutron Lutron Lutron D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Part Number Output Range Product PowPak dimming module Energi Savr Node GRAFIK Eye QS (120V ONLY) Quantum RMJ-ECO32-DV-B QSN-1ECO-S, QSN-2ECO-S QSGRJ-_E, QSGR-_E Various 100%–1% 100%–1% 100%–1% 100%–1% Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–32 1 – 16 1–64 1 – 32 1–64 1 – 32 1–64 1 – 32 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D4 / DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1 E2 FIXTURE E1 WALL CONTROL (BY OTHERS) LINE NEUTRAL CAP UN-USED ORANGE WIRE PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN LED DRIVER V+ RED V- BLACK GND USAI Lighting ® www.usailighting.com [email protected] 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 03/22/2017 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D6A / DIML6A and D6E / DIML6E D6B / DIML6B and D6F / DIML6F ® USAI Lighting IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D6A / DIML6A and D6E / DIML6E LED Dimming Compatibility Table D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) D6A / DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1% D6E / DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1% D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Refer to manufacturer's Lutron Diva DVTV/NFTV/NTFTV with PP-20 99% - 0.1% 1% dimmer load rating for Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% 1% maximum and minimum Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% fixture quantities per Lutron Interfaces GRX-TVI w/ GRX3503 100% - 0.1% 1% dimmer. Sensor Switch nIO nIO EZ 100% - 0.1% 1% Enlighted compatible. enlighted Control Unit CU-3E-1R 100% - 0.1% 1% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D6B / DIML6B and D6F / DIML6F LED Dimming Compatibility Table D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in the table below) DIMMER:SOLOdrive 0-10V D6B / DIML6B = EldoLED 0-10V control dims from 100% to 0.1% (BY OTHERS) D6F / DIML6F = EldoLED ECOdrive 0-10V control dims from 100% to 1% LED 0-10V (-) GRAY D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart 0-10V (+) PURPLE Dimmed Light Qty Fixtures V+ RED SWITCHED HOT SWITCHED HOTNumber DRIVER Manufacturer Product Part Output Range Per Dimmer* VBLACK NEUTRAL WHITE 120V & 277V DIML6B 6F Refer to GREEN 2112U-101 Bush-Jaeger Electronic potentiometer 100% - 0.1% 1% manufacturer's Jung Electronic potentiometer 100% - 0.1% 1% dimmer load GND 240-10 CLASS 2 CONTROL WIRES Leviton IllumaTech dimmer IP710-DLX 100% - 0.1% 1% rating for LINE Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 100% - 0.1% 1% maximum and RELAY Merten Electronic potentiometer 5729 100% - 0.1% 1% minimum fixture (BY OTHERS) DIML6A, 6B Pass & Seymour Titan CD4FB-W 100% - 0.1% 1% quantities per NEUTRAL TO SWITCH POWER Watt Stopper Miro 0-10V DIMMING W/RELAY DCLV1 100% - 0.1% 1% dimmer. Synergy Wallbox Dimmers ISD BC 100% - 0.1% 1% Enlighted ABB i-bus SD/S 2.16.1 100% - 0.1% 1% compatible. Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% 1% DIML6A, 6B 0-10V (-) Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% FIXTURE 1% 0-10V DIMMING W/RELAY TO GRAY SWITCH POWER 0-10V (+) PURPLE DIMMER: 0-10V Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% 1% V+ RED SWITCHED HOT BLACK Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% 1% LEDV- BLACK NEUTRAL WHITE GREEN Crestron iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% 1% DRIVER GND enlighted Control Unit CU-3E-1R 100% - 0.1% 1% CLASS 2 CONTROL WIRES * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and LINEcircuit details. (BY OTHERS) RELAY (BY OTHERS) DIMMING DRIVER WIRING SCHEMES: NEUTRAL NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D6 / DIML6 0-10V DIMMING W/RELAY TO SWITCH POWER D6 / DIML6 0-10V DIMMING (NO RELAY) FIXTURE DIMMER: 0-10V 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK (BY OTHERS) LINE GREEN GROUND GND CLASS 2 CONTROL WIRES LINE FIXTURE DIMMER: 0-10V w/ POWER SWITCHING (BY OTHERS) 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK GREEN GND RELAY (BY OTHERS) NEUTRAL NEUTRAL USAI Lighting ® www.usailighting.com DIML6A, 6B [email protected] 1126 River Road New Windsor, NY 12553 0-10V DIMMING (NO RELAY) DIMMER: 0-10V w/ POWER SWITCHING (BY OTHERS) FIXTURE T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-6 Revised 03/22/2017 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D7 / DIML7 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). D7 / DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%) D7 / DIML7 DALI CONTROLS DALI BUS DA DA FIXTURE WALL CONTROL (BY OTHERS) LINE NEUTRAL LED ORANGE (-) ORANGE/WHITE (+) BLACK WHITE GREEN DRIVER V+ RED V- BLACK GND USAI Lighting ® www.usailighting.com [email protected] 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-7 Revised 03/22/2017
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021