AVIOSYS IP POWER 9258 Power Controller User Manual

Below you will find brief information for Power Controller IP POWER 9258. The IP POWER 9258 is a web controller that allows you to remotely control the power supply of equipment connected to it. You can do this from any computer connected to the internet or local area network, there is no need for special programs or external access to the computer. You can remotely control the power switch with any computer connected to the network, saving time and manpower. The IP POWER 9258 has a built-in web server and a network browser interface, so you can operate the switch without any special programs, it supports multiple browsers, such as Internet Explore, Netscape, and Mozilla (Linux). The IP POWER 9258 also supports HTTP, SMTP, INTERNET- fixed IP, DDNS, DHCP, LAN - virtual IP, serial port communication, and can be used either separately or together with other products of AVIOSYS such as IP Kamera, IP Video and IP Sensor 9201.

PDF Download
Document
IP POWER 9258 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Remote power control
  • Built-in web server
  • Network browser interface
  • Control 4 AC outlets
  • Supports HTTP, SMTP
  • Time schedule control
  • Online firmware update
  • Secure password protection
  • Serial port communication

Frequently asked questions

Connect the IP POWER 9258 to your network using an Ethernet cable and a network hub or router. Ensure the 9258 is powered on.

The default username is 'admin' and the default password is '12345678'.

You can change the IP address of the IP POWER 9258 by accessing the 'Setup' page in the web interface and entering the desired IP address, subnet mask, default gateway, and DNS server. You can also use the ipedit.exe program to modify the IP address.

Yes, you can set up a time schedule to control the IP POWER 9258. Access the 'Power Schedule' page in the web interface and configure the desired on/off times for each outlet.
Preparing document for printing…
0%