Mattel Flutterbye Dreams Lullabye Birdies Mobile with remote control Instruction Sheet

G5892
Instructions
Lullabye Birdies™
Mobile
with Remote
Control
Please keep this instruction
sheet for future reference,
as it contains important
information.
Adult assembly is required.
Requires four "D" (LR20)
alkaline batteries for the
mobile and two “AA” (LR6)
alkaline batteries for the
remote control (batteries
not included).
Tool required for assembly:
Phillips screwdriver
(not included).
www.fisher-price.com
Parts
Canopy
Arm
2 Baby Birds
Clamp
Base
Crib Adapter
Mama Bird
#6 x 5/8" Screw - 1
Shown Actual Size
Remote
IMPORTANT!
WARNING
• Possible entanglement injury, keep out of baby’s reach.
• Remove mobile from crib or playpen when baby begins
to push up on hands or knees.
CAUTION
This toy contains small parts in its unassembled state.
Adult assembly is required.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• When used on a dresser top, keep out of baby’s reach.
• Always attach by all provided fasteners (clamp) tightly to a crib or playpen
according to the instructions. Check frequently.
• Do not add additional strings or straps to attach to a crib or playpen.
2
Remote Control Features
Rear View
Front View
3
5
4
2
1
4
1
2
3
4
5
Button - Press to activate the mobile once the mobile has been
turned ON. Press again to stop the mobile.
LED Signal Indicator - Lights when the button is pressed to let you
know the remote has transmitted a signal to the receiver.
Transmitter Window - Remote transmits a signal to the receiver dome
on the mobile.
Handle - Flips up so you can hang the remote on a door knob. Snaps
around bottom of the remote when not in use.
Battery Compartment - Insert two “AA” alkaline batteries. Please refer
to Battery Installation on page 4. For longer battery life, use alkaline
batteries only.
3
Battery Installation- Remote Control
Battery
Compartment
Remote Control
• Locate the battery compartment door on the back of the remote control.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert two “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
IMPORTANT! If the mobile does not respond to the remote, it does not mean
that the battery power in the remote is low. Replace the batteries in the
remote if the LED signal indicator on the remote is dim when the
button is pressed. If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the batteries in the
battery compartment to make sure they are properly installed.
4
Battery Installation - Mobile Base
Battery
Compartment
Mobile Base
• Locate the battery compartment door on the back of the mobile base.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib
adaptor and remove it first.
• Insert four “D” (LR20) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws with a
Phillips screwdriver. Do not over-tighten.
IMPORTANT! Under normal use conditions, the batteries in the mobile will
require replacement more often than the batteries in the remote. When
sounds or light become faint or movement of the mobile is sluggish, it’s time
for an adult to replace the batteries in the mobile base.
5
Battery Safety Information
1,5V x 2
“AA” (LR6)
Shown Actual Size
+
1,5V x 4
“D” (LR20)
Shown Actual Size
-
Batteries may leak fluids that can cause a chemical burn injury or ruin your
toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Dispose of batteries safely. Do not
dispose of batteries in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
6
Assembly
1
Base
Arm
#6 x 5/8" Screw
Shown Actual Size
• Fit the arm into the slot in the base, as shown.
• Insert the #6 x 5/8" screw through the arm and into the base. Tighten the
screw with a Phillips screwdriver. Do not over-tighten.
2
Canopy
Cover
Baby Bird
Mama Bird
• Locate the (larger) mama bird. The mama bird is marked with a
• Find the matching
on the canopy.
• Fit the plug on the mama bird into the socket in the canopy
.
• "Snap" the pegs on the cover into the holes in the canopy
.
• Repeat this procedure to attach the two baby birds.
7
.
Assembly
3
Red Line
Canopy
Arm
• Insert and "snap" the arm into the hole in the side of the canopy.
• Make sure the arm is fully inserted and snapped into the canopy.
When the arm is fully inserted, the red line on the arm should be
covered by the canopy.
• Pull on the canopy to be sure it is fully snapped onto the arm.
8
Crib Use
Crib
Adapter
Tighten
Screws
Battery
Compartment
Door
• Position the base so that the battery compartment door is facing you.
• Fit the crib adapter onto the base.
• Tighten the three screws in the crib adapter using a Phillips screwdriver.
Do not over-tighten.
9
Crib Use
Base
Crib Top Rail
Threaded Peg
Clamp
• Fit the mobile base on to the crib top rail so that the threaded peg extends
outside of the crib.
• Fit the clamp onto the threaded peg and turn the clamp clockwise to
secure the base to the crib rail. Do not over-tighten the clamp.
10
Use
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of
other remote controlled equipment, such as televisions and stereos, or use
of other electric or battery powered appliances interfere with operation of
the mobile, do not use both appliances at the same time.
• For best performance between the mobile and the remote, avoid using the
remote in areas of bright light. In bright natural or artificial light, you may
notice loss of range. Move the mobile or otherwise reduce the amount of
light to improve performance.
Mobile Dome
• When using the remote, make sure that the arrow on the mobile’s dome is
pointing towards the transmitter window on the remote. For best results,
make sure the path between the transmitter window on the remote
and the dome on the mobile are in a direct line and free of obstacles.
Rotate the mobile dome so that the arrow points to the area from
which you’re most likely to use the remote. For example, if you’ll most
often be using the remote from the doorway of the nursery, make sure
that the arrow on the mobile dome is pointing towards the doorway and
that the path between the mobile dome and the doorway is free from
obstructions.
11
Use
Power/Volume Switch
• Locate the switch on the side of the mobile base.
Slide the switch to choose from three positions:
off ; on with low volume , and on with high
volume .
• Slide the switch to the off position when not in use.
Mode Select Switch
• Locate the switch on the side of the mobile base.
Slide the switch to choose from three different modes.
Set here for soft lights as birdies fly over
baby's head.
Switch to this position for soft lights, flying
birdies and a medley of lullabies and
nature sounds.
Choose this position for music only (lights and
birds off ).
Start Button
• Press the start button on either the mobile or the
remote to activate music and lights.
• The mobile will play for approximately five minutes.
• To restart the mobile, press the start button again.
Start
Button
Remote
12
Dresser-top Use
Threaded Peg
Clamp
• Loosen and remove the clamp from the threaded peg.
• Remove the mobile from the crib.
Crib
Adapter
Loosen
Screws
Battery
Compartment
Door
• Loosen the screws in the crib adapter using a Phillips screwdriver.
• Lift and remove the crib adapter.
• Store the crib adapter in a safe place for future crib use.
13
Dresser-top Use
Knob
Locate the Knob
Pull Knob Out
Knob
Dresser-top Use
•
•
•
•
•
Locate the knob on the arm.
Grasp the knob and pull it out.
Rotate the arm to an angled position as shown.
Release the knob to lock the arm in position.
Place the mobile on a dresser top out of reach of baby.
14
Care
• Wipe the toy with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
15
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using
TTY/TDD equipment, please call 1-800-382-7470. Or, visit us on line at
www.service.mattel.com.
Write to us at:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA
G5892a-0920