null  null
TEK-HD41V VGA/HDMI Auto Switcher
Data Sheet
Installation Guide
V032614
Need a low cost solution to add VGA and HDMI inputs at a podium or conference table to your HDMI switcher.
TEKVOX has the solution with the TEK-HD41V VGA/HDMI Auto Switcher. This unit has 1 VGA with audio and 3
HDMIs inputs. These inputs will automatically switch to the active input or can be controlled by an IR remote. This unit
can be wall mounted with its supplied mounting hardware.
When used with the TEK-MHD44TP 4x4 matrix switcher, a very cost effective dual projection system can be created.
Just insert this unit in line with the Laptop HDMI input, and add both HDMI and VGA Laptop connections at the podium.
The TEK-HD41V also includes an audio de-embedder. Most other systems require the addition of an HDMI audio deembedder which can be costly. Connect the RCA audio outputs directly to an amplifier or DSP audio system.
To improve the TEK-HD41V performance with projectors operating at WXGA, there are special EDID settings that can
be made. Just set the EDID position to 6, and both the HDMI and VGA will properly operate with WXGA projectors.
Front
Rear
Auto-Switch Operation
The VGA input has priority over the HDMI inputs. If both inputs are connected and powered on at the same time, the VGA
input will be displayed.
Application
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
EDID Settings
EDID Positions 0-4 are only for HDMI and will not affect the VGA EDID. VGA EDID settings will remain 1080P.
EDID Positions 5 and 6 will also set the VGA EDID.
Position
Functions
1
EDID Copy (HDMI Only VGA set to
1080P)
EDID Learning Mode
2
1920x1080P/2CH
3
1920x1080P/5.1CH
4
1920x1080P/7.1CH
5
1280x720P/60Hz
6
1280x800/60Hz
7
Reserved
0
Device Specifications
Model
TEK-HD41V (79056)
Inputs
1 x VGA + 3.5mm Audio & 3 x HDMI
Outputs
Input Video Signal
1 x HDMI and RCA Audio
IR and Automatic – IR codes are available
by request.
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Video (HDMI) format
supported
VGA format supported
[email protected], [email protected],
1080P/1080i/720P/576P/480P/576i/480i
[email protected]
Audio Format Supported
DTS-HD, Dolby HD, PCM 7.1
Output Video
HDMI1.4a
Power Consumption
[email protected], 6 watts (Max.)
Temperature
-5 to +35 C, -41 to +95 F
Size
W: 7.1” / H: 1.1” / D: 3.6”
Weight
0.66 lbs.
Control
Specifications are subject to change without notice.
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement