Sanyo RM-X105 Instruction manual

INSTRUCTION MANUAL

Clock Radio

RM-X105

FOR SAFE AND EFFICIENT OPERATION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BOTTOM, NO USER-SERVICEABLE) PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE – UNINSULATED DANGEROUS VOLTAGE THAT MAY BE OF

SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO

PERSONS WITHIN THIS PRODUCTS ENCLOSURE.

WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO

PAIN OR MOISTURE.

IMPORTANT NOTES

AVOID INSTALLING THE UNIT IN LOCATIONS DESCRIBED BELOW.

PLACES EXPOSED TO DIRECT SUNLIGHT OR CLOSE TO HEAT RADLATING

APPLIANCES SUCH AS ELECTRIC HEATER.

ON TOP OF OTHER STEREO EQUIPMENT THAT RADIATES TOO MUCH HEAT.

PLACES LACKING VENTILATION OR DUSTY PLACES.

PLACES SUBJECT TO CONSTANT VIBRATION.

HUMID OR MOIST PLACE.

TAKE CARE NOT TO OBSTRUCT THE VENTILATION OPENINGS.

OPERATE CONTROLS AND SWITCHES AS DESCRIBED IN THE MANUAL.

BEFORE TURNING ON THE POWER FOR THE FIRST TIME, MAKE CERTAIN THE

BATTERIES AND/OR POWER CORD ARE PROPERLY INSTALLED.

NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE

PLACED ON THE APPLIANCE;

THE APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED

ON THE APPLIANCE;

THE VENTILATION SHOULD NOT BE IMPEDED BY COVERING THE VENTILATION

OPENINGS WITH ITEMS, SUCH AS NEWSPAPERS;

THE MAINS PLUG SHALL REMAIN READILY OPERABLE.

POWER CONNECTION

1. PLUG THE AC POWER CORD TO A HOUSEHOLD OUTLET. MAKE SURE THE

VOLTAGE IS CORRECT (AC240V~VOLT, 50Hz) TO PREVENT POSSIBLE

2.

DAMAGES TO THE SET.

CONNECT ONE 9-VOLT BATTERY (NOT INCLUDE) TO THE BATTERY TERMINALS

IN THE BATTERY COMPARTMENT (UNDERSIDE OF THE CABINET). IT

MAINTAINS THE CLOCK TO FUNCTION EVEN IF THE AC POWER IS

INTERRUPTED.

3. PLEASE NOTE: THE DISPLAY WILL NOT EXHIBIT TIME DURING POWER

FAILURE BUT THE CLOCK WILL KEEP CORRECT TIME.

-1-

DESCRIPTION

1. AUTO-OFF-ON

10. SNOOZE

11. TUNING

13. SPEAKER

15. AC POWER CORD

CONNECTING THE RADIO

PLUG THE AC CORD INTO THE POWER OUTLET. WHEN ELECTRICAL

POWER HAS BEEN INTERRUPTED AND RESTORED, THE CLOCK DISPLAY

WILL BLINK. MAKE SURE TO RESET BOTH THE CORRECT TIME AND

ALARM TIME FOR PROPER OPERATION.

TIME SETTING

PRESS AND HOLD THE TIME SET (3). PRESS THE MINUTE SET (8) OR

HOUR SET (7) TO SET THE CLOCK DISPLAY TO THE CORRECT TIME.

RELEASE THE TIME SET (3) AND MINUTE SET (8) OR HOUR SET (7) WHEN

FINISHED THE SETTING.

RADIO OPERATION

SLIDE THE AUTO-OFF-ON (1) TO "ON". SELECT THE DESIRED BAND WITH

THE BAND SWITCH (14). ADJUST TUNING (11) AND VOLUME (2) FOR THE

DESIRED STATION AND LISTENING LEVEL.

SLEEP TO MUSIC

SLIDE THE AUTO-OFF-ON (1) TO EITHER "OFF" OR "AUTO". PRESS THE

SLEEP SET (6) ONCE. YOU CAN HAVE 59 MINUTES PLAYING THE RADIO

TO ACCOMPANY YOU TO SLEEP. TO SET FOR A DESIRED PERIOD OF

SLEEP, SIMPLY PRESS AND HOLD SLEEP SET (6) AND THEN PRESS

MINUTE SET (8) TO SET THE DESIRED PERIOD OF THE SLEEP FUNCTION.

PRESS THE SLEEP SET (6) AND THE HOUR SET (7) SIMULTANEOUSLY

FOR ONE HOUR AND 59 MINUTES SLEEP TIME. IF YOU WANT TO TURN

OFF THE RADIO BEFORE SLEEP TIME HAS EXPIRED, PRESS SNOOZE

BUTTON (10) ONCE.

-2-

WAKE TO MUSIC

PRESS AND HOLD THE ALARM SET (4). PRESS THE HOUR SET (7) OR

MINUTE SET (8) TO SET THE DESIRED WAKE UP TIME. RELEASE THE

ALARM SET BUTTON (4) TO SHOW THE CURRENT TIME. SLIDE THE

AUTO-OFF-ON (1) TO "AUTO". THE RADIO WILL PLAY AUTOMATICALLY

AT THE PRESET TIME.

WAKE TO BUZZER ALARM

FOLLOW THE STEPS OF "WAKE TO MUSIC" AND TURN OFF THE VOLUME.

YOU WILL BE AWAKENED BY THE BUZZER ALARM. IF YOU WANT TO

STOP THE ALARM, SWITCH AUTO-OFF-ON (1) TO "OFF" OR PRESS THE

ALARM OFF (5) ONCE.

SNOOZE OPERATION

WHEN THE ALARM IS ON, PRESS SNOOZE (10) ONCE. AFTER 9

MINUTES, THE ALARM WILL BE ON AGAIN.

TO GO TO SLEEP AND WAKE TO MUSIC

REPEAT THE STEPS OF "WAKE TO MUSIC". PRESS SLEEP SET (6) TO

SET FOR A DESIRED PERIOD OF RADIO PLAYING BEFORE SLEEP. THE

RADIO WILL STOP AUTOMATICALLY AND WILL START AGAIN AT THE

PRESET WAKE UP TIME.

BATTERY BACKUP

THIS CLOCK HAS A BACKUP POWER SYSTEM TO ENSURE CONTINUOUS

OPERATION DURING POWER FAILURE. INSERT ONE 9-VOLT BATTERY

AND THE CLOCK MECHANISM WILL CONTINUE TO MAINTAIN THE

CURRENT TIME AND ALARM PROGRAM.

DRIPPING & VENTILATION WARNING

THE PRODUCT SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING

AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL

BE PLACED ON THE PRODUCT. THE NORMAL VENTILATION OF THE

PRODUCT SHALL NOT BE IMPEDED FOR INTENDED USE.

-3-

TROUBLE SHOOTING

PROBLEM SOLUTIONS

IF THE UNIT IS MAKE SURE THE AC

COMPLETELY DEAD CORD WAS PLUG INTO

THE POWER OUTLET.

ENSURE THE AC CORD

WAS NOT DAMAGE.

IF THE RADIO CANNOT

WORK PROPERLY

PLEASE TRY TO PUT

THE ANTENNA IN

DIFFERENT POSITIONS.

SPECIFICATIONS

POWER SUPPLY: AC 240V~50Hz

DC IEC6F22/006P/PP3 (1PC) FOR CLOCK BACK UP, BATTERY

EXCLUDED.

AC POWER CONSUMPTION: 3W

AC OPERATION POWER: 2W

FREQUENCY: FM: 87.5 – 108MHz

AM: 522 – 1620KHz

OUTPUT POWER: 250m WATT PER RMS

UNIT SIZE: 127.5 x 104 x 53 mm (L x W x H)

WEIGHT: 340 grams (Not including battery)

-4-