Brookstone INADA Signature HCP-S8900A Operating Manual

TABLE OF CONTENTS

HCP-S8900A

n

INTRODUCTION ................................. 1 n

CAUTIONS & WARNINGS .................. 2 n

MAIN FEATURES................................ 5 n

NAMES OF PARTS & FUNCTIONS ... 6 n

PREPARATION BEFORE USE ........... 8 n

POSITION ADJUSTMENT ................ 12 n

AFTER USE ...................................... 16 n

CARE & STORAGE ........................... 16 n

SESSIONS & SELECTIONS ............. 17 n

PRE-PROGRAMMED MASSAGE

SESSIONS ........................................ 20 n

MANUAL FUNCTIONS ..................... 22 n

TROUBLESHOOTING ...................... 24 n

PRODUCT CARE & STORAGE ........ 25 n

FAQ ................................................... 26 n

AFTER SALES SERVICE ................. 27 n

SPECIFICATIONS ............................. 28 n

WARRANTY ...................................... 29

Before you start using your Brookstone Signature™ Massage Chair, please read the operation manual thoroughly for the correct methods of usage, especially taking note of the section on safety.

This manual should be kept on hand for easy reference. It is your guide to safe and efficient operation.

This product is designed for home use.

Operating Manual

Warranty card provided separately

INTRODUCTION

Congratulations and thank you for trusting Brookstone. You are about to discover the many joys of owning a premium Brookstone Signature™ Massage Chair. Massage combined with healthy eating, exercise and a good sleep regimen is a great way to take care of your body & mind, leading to a happy, productive lifestyle.

For 50 years, Brookstone has been the trusted source for quality products that improve your life. We have partnered with Inada who has been the leader in developing and producing top quality massage chairs. Your

Brookstone Signature™ Massage Chair has been developed in partnership with Inada, and it is covered by an

Inada 3 year, parts and labor with on-site service warranty. Take comfort in knowing our quality engineering team goes the extra mile everyday, to make sure our customers rarely need it.

We believe you are going to love this chair. If so, please tell others how it has changed your life. If we have somehow let you down, please tell us directly. Continuous feedback from our customers, either loving products or helping us to improve them, is critical to Brookstone’s success for the next 50 years.

If you have an issue with your chair PLEASE CONTACT INADA DIRECTLY by calling 303.572.5000. You can also email Inada anytime at [email protected].

For questions about your purchase, prior to delivery, please contact the Brookstone Customer Care Center at

1-866-366-3199. You can also email us, anytime, at [email protected]

Sincerely yours,

Brookstone

1

CAUTIONS & WARNINGS

When using the Brookstone Signature™ Massage Chair, basic precautions should always be followed, including the following: Read all instructions before using the Brookstone Signature™ Massage Chair. The operating manual contains important information about how to use the chair safely and correctly.

Please familiarize yourself with the symbols and their meanings below. These will be used throughout the operating manual to highlight important safety instructions.

Remember to keep this Operating Manual in an easily accessible place.

Indications, Symbols and Descriptions

Warning

This action could result in serious injury or death.

Caution

This action could result in personal injury or damage to property.

2

Prohibited

Prohibited.

Do not disassemble

Do not disassemble.

No wet hands

Do not handle with wet hands.

Do not use in a bathroom.

Do not wet

Do not use in a location where the chair may become wet.

Unplug the power plug from the wall outlet.

Prohibited

Unplug the chair

Required action.

Required Action

Prohibited

Caution

z Do not install the chair in an area of high humidity, such as a bathroom or sauna.

→ Could result in electric shock or damage to the chair.

Prohibited z Never connect the ground wire to gas pipes, water pipes, telephone lines, or lightning rods.

Required Action z Install on a flat, level surface only.

→ Chair could tip over if placed on an uneven surface.

Safety Installation

Electrical grounding

Warning

z This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current in order to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

z Improper connection of the equipment-grounding conductor can result in the risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.

z Do not modify the plug provided with the product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

z This product uses a normal Alternating Current(AC) circuit and has a grounding plug that looks like the plug illustrated in the figure to the right. Make sure that the product is connected to an outlet having the same configuration as the plug.

z Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

Required Action

Prohibited

Required Action

Caution

z Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock or injury to persons.

z Use this appliance only for its intended use as described in this Operating Manual. Do not use attachments not recommended by the manufacturer.

z Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Call Inada at 303.572.5000 immediately.

z Do not carry this appliance by the power cord or use cord as a handle.

z Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.

z Never drop or insert any object into any opening.

z Do not use outdoors.

z Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

z Children should be supervised to ensure that they do not play with the appliance.

z An appliance should never be left unattended when plugged in. Unplug from the outlet when not in use, and before putting on or taking off parts.

z Close supervision is necessary when this appliance is used by, or near children, invalids, or disabled persons. Keep children away from reclining backrest and extended footrest.

z Keep the cord away from heated surfaces.

z To disconnect, turn all controls to the off position, then unplug from the outlet.

z Connect this appliance to a properly grounded outlet only. See Grounding Instructions.

z This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Safety Before Use

Prohibited

Required Action

Prohibited

Required Action

Warning

z The following persons must not use this massage chair:

◎ Persons who have been instructed by a doctor to avoid massage therapy. Ex. Thrombosis, severe aneurism, acute varicosity, or dermatitis and/or skin infection including inflammation of the hypodermis.

◎Persons with suspected acute neck sprain (whiplash injury) z Do not use the chair with any power supply other than those shown in the table on the right.

→ May result in fire or electric shock.

z Do not use with any type of transformer device.

→ May result in damage to the chair or electric shock.

Model number Power supply

HCP-S8900A AC120V~ z Do not use the chair if the power cord or plug is damaged, or if the wall outlet connection is loose.

→ May result in electric shock, short circuit, or combustion.

z Before each use, check for holes or tearing in the fabric in the active area. Also, check the other parts for tearing. Stop using the chair immediately if you find even the smallest tear. Unplug the chair and contact Inada for assistance. Never use the chair with the fabric removed from the active area or with holes or tears in the fabric. Doing so is extremely dangerous.

→ Using the chair with holes or tears in the fabric could result in injury or electric shock.

z Persons with any of the following conditions should seek medical advice before using the chair:

◎ Serious heart conditions ◎Sensory impairment caused by serious peripheral circulatory disorders due to diabetes and other diseases

◎ Osteoporosis, spinal fractures, acute pain and/or symptoms thereof ◎Persons being treated for personal injuries

◎ High fever (38°C (100°F) or higher) Ex. Strong acute inflammation illness caused by fatigue, chills, blood pressure fluctuation, or asthenia

◎ Persons in the early stages of pregnancy, or immediately after giving birth.

◎ Persons who have electronic medical device(s) easily susceptible to electromagnetic interference Ex. pacemaker

◎ Persons with an abnormal or curved spine ◎Persons planning to use the chair for treatment or for rehabilitation purposes

◎ Persons with malignant tumor(s) ◎Persons under bed rest orders

◎ Persons with acute gastro-intestinal complaints or ailments such as gastritis, enteritis, or hepatitis ◎Persons with thermoanesthesia

◎ Persons under a doctor's care, or those experiencing unusual physical discomfort ◎Joint dysfunction due to rheumatism, gout, or other diseases

◎ Persons with thecitis or suspected thecitis z Elderly people and persons with weak bones should seek medical advice before using the chair, even if they do not have a specific disease.

z If your condition does not improve after use, consult a doctor or specialist.

Caution

z Do not use the chair in any way not prescribed by the Operating Manual. Do not use the chair together with any other therapeutic device or with an electric blanket.

→ May result in injury or have a negative effect on health.

z Do not move the chair while someone is in it.

→ Accident or injury may result if the chair tips over.

z Do not sit down on the chair with the footrest raised.

→ Any sudden impact on the footrest could cause damage to the mechanism. Also, an accident or injury may result if the chair tips over.

z Do not use with anything other than the accessories supplied with this product.

z Before plugging the power plug into the wall outlet, make sure that the main power switch is off.

→ May result in damage to the chair or electric shock.

z Make sure that the plugs on the power cord are inserted fully into the cord connector and the wall outlet.

→ May result in electric shock, short circuit, or combustion.

z Before using the chair for the first time, turn on all the switches in order as indicated in this Operating Manual to check that the chair is operating properly.

z Before using, raise the reclining seat back to its fully upright position. Then recline the seat back slowly to the most comfortable position, remembering to start off with a lighter massage.

→ Starting with a deep massage may result in injury. Elderly people and persons with weak bones should be especially careful when selecting massage intensity.

z For safety, check the position of the mechanism before sitting. If the mechanism is not in the storage position, turn the main power switch on, and check that the chair operates properly before sitting down slowly. For the storage position, see page 5.

z Do not sit, stand, or lean on the footrest unless you are sitting in or getting up from the chair.

→ Personal injury or damage to the chair may result if the chair tips over.

z If you use the chair after it has not been used for a long time, read this Operating Manual again thoroughly and check if the chair operates properly.

Safety During Use

Prohibited

Warning

z Do not wrap the power cord or the remote control cord around your body, or place the chair on top of either cord. Do not scratch, tear, treat, unduly twist, stretch or bend the power cord or the remote control cord.

→ The cords may be damaged, resulting in fire or electric shock.

z Do not spill water or other liquids on the chair or remote control.

→ May result in electric shock, short circuit, or combustion.

z Children and those who are unable to express their intentions should not use the chair. Keep children and pets off the chair and away from the surrounding area (especially behind the reclining seat back or under the seat or footrest).

→ Could result in accident or injury.

z Do not use the chair while more than one person is sitting in it. In particular, do not use the chair while holding a small child (or baby).

→ Could result in accident or injury.

z Do not use the chair if the fabric is torn. If it is, unplug the power plug from the wall outlet.

→ Could result in an accident, injury or electric shock. For repairs, contact Inada.

z Do not release your hands suddenly while lifting the footrest.

No wet hands z Do not use the chair while your body is wet or with wet hands.

→ Could result in electric shock or damage to the chair.

Required Action z Make sure no one, especially children or pets, is in the way when lowering or raising the reclining seat back. Be careful that people or objects are not caught behind the seat back or under the leg rest.

3

4

CAUTIONS & WARNINGS

Safety During Use

Prohibited

Required Action

Unplug the chair

Caution

z Do not use the chair unclothed.

z Do not use the chair for purposes other than massage, or other than the ordinary uses of a chair.

→ Could result in accident or injury.

z Do not use the chair to massage the head, chest, stomach, and/or joints (knees, elbows).

→ May result in nausea or injury. Place a soft towel behind your neck if you want to avoid intense stimulation of the area.

z Do not place your hands or feet into the roller tracks, or into moving parts such as the reclining mechanism. Do not sit wearing hard objects, such as hair accessories or jewelry.

→ May result in personal injury.

z Do not place anything other than legs and feet on the footrest.

→ May result in personal injury.

z Do not operate the massage chair or leave it operating when there is no one in it.

→ Could result in accident or injury.

z In an emergency, or if you find any abnormal condition, push the Pause button on the remote control to stop operation immediately.

z If you get acute pain or other unusual physical discomfort while using the chair, immediately discontinue the use of the chair and seek medical advice.

z If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If it still feels too strong, stop operation immediately and contact Inada.

→ May result in injury if you continue use with high stimulation under such circumstances.

z Do not use with the back pad removed.

→ May result in personal injury.

z Do not fall asleep in the chair during a massage session.

→ May result in personal injury.

z Keep massage sessions to no longer than 15 minutes. Do not exceed 5 minutes for an area-specific massage of any particular part of the body.

→ Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired effect, or even injury. The total amount of massage time in a day should be limited to about 30 minutes, keeping appropriate intervals between each massage session.

z If your leg or foot comes out of the footrest during the massage, do not try to force it back in.

→ Undue force may result in damage to the mechanism.

z If there is a power outage or the possibility of a power outage, stop the chair immediately and turn the main power switch off.

Unplug the power plug from the wall outlet.

→ Accident or injury may result if the chair is still in operating mode when the power resumes.

z If there is a threat of lightning, stop operation immediately and turn the main power switch off. Unplug the power plug from the wall outlet.

z If an operation does not start, or if you find any abnormality, stop the chair immediately and turn the main power switch off to prevent an accident. Unplug the power plug from the wall outlet. Contact Inada for inspection or repairs.

→ Electric shock or fire caused by a short circuit may result if the chair is left plugged in under such circumstances.

Safety After Use or When Not in Use

Prohibited

Unplug the chair

Caution

z Be sure to turn the main power switch off after every use and to unplug the power plug from the wall outlet.

→ An accident or injury may result if children or pets play with the chair.

z Do not use a power cord other than the one supplied.

z After using the chair, be sure to return the reclining seat back to the upright position.

z Wipe the chair off after every use, and store the chair in a place with low humidity.

z Do not place any object on the chair.

z Hold the power plug when unplugging from the wall outlet. Do not pull on the power cord.

→ May result in electric shock or fire caused by short-circuiting.

z Before cleaning the chair, make sure to unplug the power plug from the wall outlet. Do not plug or unplug the power plug with wet hands.

z If the chair is left unused for a while, be sure to unplug the power plug from the wall outlet.

→ Insulation degradation by dirt or moisture may cause electric shock, or fire due to short-circuit.

Other Safety Precautions

Prohibited

Do not disassemble

Warning

z Do not stand on the chair. Do not make a major impact or sit on any part of the chair other than the seat.

→ Personal injury or damage to the chair may result if the chair tips over.

z Do not try to repair any malfunction of the chair. Contact Inada for assistance.

z For safety, if the power cord is damaged, contact Inada.

z Do not modify or remodel the chair.

→ May result in fire, electric shock, or injury.

Caution

Required Action z If you lend, sell, or otherwise transfer the chair to another party, make sure to include this Operating Manual.

Note

z Before disposing of the product or its accessories, consult your local authorities about the proper procedure.

MAIN FEATURES

Main Features

2 separate sections for simultaneous massages

OCTET® dual mechanism technology

The backrest is equipped with two (2) separate mechanisms for the neck and lower back. The mechanisms perform various motions. For example, they can massage different positions simultaneously or both can massage one (1) position.

Complete air massage

Full Body Air Massage Function

The chair performs a full body air massage from the footrest that massages the soles of the feet to the calves, the seat that massages the buttocks, and the arm/shoulder units that massage from the shoulders to the fingertips.

An adjustment sensor provides an

Automatic Shiatsu Point Locator Function

This function automatically locates shiatsu points in accordance with the person’s body type before a massage. This allows for an effective massage tailored to a body type or objective.

Easy-to-see LED

Stylish Remote Control

An LED lights up for the selected session, making the buttons easy to understand and use.

Easy to adjust to the most comfortable position

Automatic reclining function

The seat back can be reclined to any angle between approx. 115° and 160° from the floor.

The angle of the footrest also can be adjusted up to approx. 90° according to your preference.

Warm on hands and soles of feet

Heater for Hands and Soles of Feet

The chair is equipped with heaters for the hands and the soles of feet. Massaging while heating the entire body provides a relaxing effect.

5

4

5

6

NAMES OF PARTS & FUNCTIONS

Chair

1

2

3 1

2

9 #

0

!

@

8

7 a

%

^ &

$ b

* ( ) d

1 Headrest (small)

2 Headrest (large)

3

Armrest

/1 each on the left and right

•

1 Shoulder Unit

•

2 Arm Unit

4 Remote Control

5 Remote Control Pocket

6 Footrest

6

7 Sole heater

8

9 x 2

Pocket for the air shiatsu pad for the soles

Rollers

(Normally stored inside the upper part of the seat back)

0 Back Pad

!

Hand heater

/1 each on the left and right

@ Seat

# Reclining Seat Back

$ Back Cover

% Wheels

^ Power Cord

& Plug

* Main Power Switch

( Inlet

) Cord Connector c g e f a Shoulder air cell b Arm air cell c Seat air cell d Calf air cell e Air cell f Instep air cell g Sole air cell x 6 x 8 x 4 x 30 x 12 x 8 x 6

a Shoulder air cell b Arm air cell c Seat air cell d Calf air cell e Air cell f Instep air cell g Sole air cell x 6 x 8 x 4 x 30 x 12 x 8 x 6

Remote Control

1

2

6

7

8

0

3

5

4

9

Warning

Caution

z Do not spill water or other liquids on the remote control.

z Do not handle the remote control with wet hands.

z Do not sit, step or place heavy objects on the remote control.

z Do not drop the remote control. It is recommended that the remote control be placed in the remote control pocket when not in use.

z Do not exert excessive force on the remote control.

z Do not pull the remote control cord forcibly.

z Do not operate the remote control using sharp-edged or hard objects. It may result in damage.

1

2

Power Button

Pause Button

Turns the remote control power ON and

OFF.

Pushing the POWER button while the chair is activated causes the rollers to return to the starting position, after which the chair turns itself off .

When the power of the remote control is

OFF, the button flashes in blue. When the power is ON, the button lights in blue.

Press this button when you want to pause a massage.

During a pause, the Power button and the Pause button flash alternately in blue and red, respectively.

When the Pause button is pressed again, the massage starts again from the point it was paused.

When the Power button is pressed, the massage ends.

3

4

Heat Button

The hand and sole heaters can be switched ON/OFF.

When the heater is on, the button lights in red.

When a quick session has been chosen, the heater is ON.

Massage Intensity

Buttons

The intensity of an upper body massage can be adjusted in 3 levels.

When the massage intensity is Low,

Medium, or High, the buttons light green, orange, or red, respectively.

5

6

7

8

9

0

Air Intensity

Buttons

Pre-Programmed

Massage

Sessions

Massage Position

Adjustment

Buttons

Chair Recline

Button

Footrest Button

Manual Functions

The intensity of an air massage can be adjusted in 3 levels.

When the air intensity is Low, Medium, or High, the buttons light green, orange, or red, respectively.

The desired session can be selected.

The selected session button lights in white.

These buttons are used to adjust the shoulder positions during shiatsu point location or the position of the rollers during a manual session.

During shiatsu point location, the up/ down buttons flash in white alternately.

The reclining angle can be adjusted.

The operating button lights in white.

Furthermore, the functioning button lights in white even when the reclining angle is changed automatically during a session.

The angle of the footrest can be adjusted.

The operating button lights in white.

Furthermore, the functioning button lights in white even when the footrest angle is changed automatically during a session.

The desired session can be selected.

The selected session button lights in white.

* For an explanation of each session, see pages 15 and 16.

7

PREPARATION BEFORE USE

Setting up the Brookstone Signature™ Massage Chair

z This chair is shipped with the backrest reclined. Before use, ensure that the backrest is raised to its full upright position.

Caution

z The Brookstone Signature™ Massage chair is to be used for indoors household use only.

The chair is not designed for commercial purpose.

z If you use the chair in a cold room, do not increase the temperature abruptly. Instead increase the temperature gradually to a normal level.

z If the chair is stored in a cold place and is moved into a warm environment, wait one hour before use. Otherwise, performance may suffer, or the chair may malfunction due to condensation on the mechanism.

Installation

z Ensure that there is an allowance of at least 20” in front of and behind the chair to allow the backrest to recline and the leg rest to extend without obstruction during operation.

Caution

z Do not install the chair in an area of high humidity, such as a bathroom or sauna.

z Do not use the chair in an excessively humid or dusty environment as this may result in malfunction or electric shock.

z Do not use the chair in a room with a temperature of 104°F or higher.

z Do not expose the chair to heaters, stoves or direct sunlight.

z Keep fire sources such as cigarettes and ashtrays away from the chair.

z It is recommended that a carpet be placed under the chair to prevent scratching the floor and to reduce noise during operation (do not install on an electric carpet).

z As the chair is heavy, please exercise extra care not the damage the floor when positioning it.

z Maintain a minimum distance of 3 feet from AV devices, such as a TV or radio, to prevent signal interference.

z Use the chair only when placed on an even, flat non-slip surface.

z With a person weighing 265 lbs sitting in the chair, the floor load is approximately 5 lbs per .5 square inches.

20 inches

Checking the Supplied Items

Check that the chair and the other items are all in the package.

 

Box 1 Items Included in Box 1

20 inches

Box 2

Chair

8

Right Armrest / Left Armrest

Operating Manual

(this document)

Power Cord

 

T-shaped Wrench

Screw

×6 ×6

Washer Shiatsu Balls Shiatsu Pad (L/R)

(Shiatsu balls and shiatsu pads have been pre-installed in your chair.)

How to Transport or Move the Chair

Before moving the chair, turn off the main power, disconnect the power plug from the wall outlet and disconnect the power cord connector from the power connector.

To Move with the Wheels

Raise the reclining seat back to its upright position, hold the sides of the footrest, and then move the chair on the wheels by lifting and holding up the front part of the chair.

To Carry

Fully recline the seat back and carry the chair by holding the handle on the upper part of the back cover and the sides of the footrest.

Hold the Handle Hold the Handle

Caution!

If the passageway clearance is 34 inches or less, the chair cannot be moved using the normal method.

Open the zipper

Wheels Hold the Handle

There is a risk of damaging the floor surface, so lay down mats or take other protective measures before moving the chair.

Hold the chair firmly, or the chair may fall and damage the floor or cause an injury.

z The chair is very heavy, so be sure to wear appropriate gloves when transporting or moving the chair to

prevent it from being dropped or an injury from occurring.

z The chair is very heavy, so be careful not to hurt your lower back when transporting or moving it. z The remote control is attached to the chair, so make sure that it does not fall when moving the chair.

Caution

z Do not move the chair while someone is in it.

z Before moving the chair, disconnect the power cord from the wall outlet, and also disconnect the power cord connector from the power connector.

→ The power cord may be damaged, resulting in fire or electric shock.

Power

① First, plug the power cord connector into the power connector located at the back left of the chair.

Then, plug the other end of the cord into the wall outlet.

② Turn on the main power switch located at the back left of the chair.

ON

OFF

* If the main power switch is turned on while the rollers are stopped partway, they will automatically return to the storage position (upper part of the seat back) and then stop.

Warning

z Do not use with any type of transformer device.

→ May result in damage to the chair or electric shock.

z Ensure the power cord is not placed under the chair.

Caution

z Before plugging the power plug into the wall outlet, make sure that the main power switch is off.

z Make sure that the plug on the power cord is inserted fully into the wall outlet.

z Before using the chair for the first time, turn on all the switches in order as indicated in this Operating Manual to check that the chair is operating properly.

z Use a high-quality surge protector with your massage chair. Failure to do so voids the manufacturer warranty on your chair. An appropriate high-quality surge protector can be purchased online at www.InadaUSA.com.

9

PREPARATION BEFORE USE

How to Install the Armrests

Before installing the armrests, turn off the main power and disconnect the power cord connector from the power connector on the chair.

1 Place the armrest at the side of the chair and pass the air hose and harness through the rectangular hole.

*Be careful not to pass it through the groove.

2 Align the shaft on the chair with the hole on the armrest as shown in the diagram, and insert the armrest.

3 Open the zipper.

a b

4 Connect the air hose and harness.

10

5 Turn over the fabric, and use the T-shaped wrench to install the supplied screw and washer in the direction shown in the diagram. (Total of 3 locations on each side, indicated by circles in the diagram; ensure that the washer direction is correct.)

6 Close the zipper.

If there are wrinkles in the leather, straighten them out by hand.

7 Before use, insert the remote control into the pocket and manage the remote control cord as described below.

It can be attached to either the left or right side.

How to Remove the Armrests

Remove them by reversing the procedure for attaching the armrest.

Caution

z Before starting work, remove the power cord and ground wire from the outlet and remove the connector of the power cord from the inlet.

→ May damage the power cord and grounding wire and cause fire or electric shock.

Checking the Chair Fabric

Carefully examine the covering before each use. Call Inada for service if the covering shows any sign of deterioration, such as blistering, peeling or cracking.

Caution

z Be sure to check for tearing on the chair fabric before every use. Also, check the other parts for tearing. Stop using the chair immediately if you find even the smallest tear. Unplug the power plug and contact Inada for assistance.

Never use the chair with the chair fabric removed or with holes or tears in the fabric. Doing so is extremely dangerous.

11

POSITION ADJUSTMENT

Proper Sitting

When the chair is off, the rollers are stored in the upper sides of the backrest, this is known as the “storage position”. If the rollers are not in the storage position, simply reset by pressing the power button on the remote control before sitting on the chair.

Caution

z Do not sit on the chair with the leg rest raised. Sudden heavy weight on the leg rest could cause damage to the mechanism, or it may result in accident or injury.

z Ensure the backrest returns to the upright position before sitting.

Cautions when getting on and off the chair

When you get on or off the chair, do not place your hand on the shoulder unit to support yourself.

This may result in a malfunction.

YES NO

Headrest (Small) Adjustment

The small headrest is attached to the chair with Velcro so that you can adjust the position. Adjust the small headrest to match the position of your head before starting the massage.

Proper Position of Small Headrest

YES

The position of the headrest matches the back of the head.

NO

The position of the headrest is high. z Use the headrest in the correct position. If position of the headrest is too high or too low, the Automatic

Shiatsu Point Locator may not run correctly.

Caution

z The headrest (small) is equipped with a weight, so do not throw or swing it. Take particular care if there are small children in your home.

→ May result in injury.

12

How to Use the Armrest

Place your arm as shown in the diagram below so that your elbow is between the arm unit and shoulder unit.

Place your elbows between the arm unit and shoulder unit.

Insert so that your palm is facing down.

Caution

z Do not use the shoulder unit and arm unit for any area other than your shoulders and arms respectively.

→ May result in personal injury.

z If your arm comes out of the shoulder unit or arm unit during the massage, do not try to force it back in.

→ Undue force may result in damage to the mechanism.

z Do not massage your elbows.

z Be sure that your palms are facing down when massaging your arms.

→ May result in personal injury.

How to Use the Shiatsu Balls & Shiatsu Pads

Shiatsu balls and shiatsu pads have been pre-installed in your chair. These can be adjusted or removed from the foot pockets based on your personal preference.

Heel side pocket

Pocket Opening

Toe side pocket

R L

How to Use the Heat Function

■The heater switches on or off each time the button is pressed.

When the Heat button is pressed, the light turns on and the seat heater switches on.

(Stops after approximately 15 minutes)

*Note that when the Heat button is pressed during a program, the heat function will shut off at the end of the program.

z If the lamp flashes several times, and then switches off when the button is pressed, the heater cannot be used.

Contact Inada.

13

POSITION ADJUSTMENT

Reclining the Backrest

■To raise the backrest, push and hold the recline p until the

backrest is at your desired position.

■To lower the backrest, press and hold the recline q until the

backrest is at the desired angle.

Reclining Movement Range

The chair reclines up and down in conjunction with the movement of the seat back and footrest.

To automatically incline or recline the backrest to its fully extended or upright position, press and hold the corresponding Recline button for approximately 2 seconds.

If it stops mid-operation, press the button again.

* The seat back and footrest move to their maximum positions and then stop.

Warning

z Make sure no one, especially children or pets, are in the way when lowering the reclining seat back. Be careful that people and/or objects are not caught behind the reclining seat back.

Raising and Lowering the Footrest

The footrest can be raised independently for additional benefit.

■To raise the foot rest, press and hold the foot rest button

p

until the foot rest is at the desired angle.

■To lower the foot rest, press and hold the foot rest button

q

until the foot rest is at the desired angle.

14

To automatically raise or lower the footrest to its fully extended or seated position, press and hold the corresponding Foot button for approximately 2 seconds.

If it stops mid-operation, press the button again.

Foot Rest Extension and Retraction

When you sit in the chair and raise the footrest to the specified height, it automatically adjusts to the appropriate length.

Warning

z Make sure no one, especially children or pets, are in the way when lowering the footrest. Be careful that people and/ or objects are not caught under the footrest.

z Do not release your hands suddenly while lifting the footrest by hand.

Caution

15

AFTER USE

While making sure there is nothing in the surrounding area, return the reclining seat back to its upright position and lower the footrest to its lowest position.

Turn off the main power switch on the back left of the chair.

Caution

z Be sure to turn the main power switch off after every use and to unplug the power plug from the wall outlet.

→ An accident or injury may result if children or pets play with the chair.

z After using the chair, be sure to return the reclining seat back to its upright position and lower the footrest to its lowest position.

z Wipe the chair off after every use, and store the chair in a place with low humidity.

z Hold the power plug when unplugging from the wall outlet. Do not pull on the power cord.

z If the chair is left unused for a while, be sure to unplug the power plug from the wall outlet.

z Be careful not to tangle yourself in the cords and trip over.

PRODUCT CARE & STORAGE

Storing the Brookstone Signature™ Massage Chair

z Wipe off dust and dirt with a soft, dry cloth after use.

z Keep the chair clean and away from places of high humidity.

z If the chair is not going to be used for a long time, cover it with a dust cover and disconnect its power plug from the electrical outlet.

Caution

z Do not store the massage chair under direct sunlight or in places of high temperature. This may cause the color of the upholstery to fade.

Cleaning the Brookstone Signature™ Massage Chair

Caution

z Before cleaning, ensure that the main power switch is turned off and the AC Plug is disconnected from the electrical outlet. Do not handle the power cord with wet hands.

Caring for the Back Pad and Covers

Soak a piece of soft cloth in lukewarm water in which a small amount of mild detergent has been added. Then thoroughly wring it out before cleaning off any spots or grime. Do not pour any liquids directly on to the chair.

Caution

z Do not allow the massage chair to remain in contact with vinyl or wallpaper for extended periods of time as this could lead to discoloration.

Caring for the Remote Control

Wipe dirt off the remote control with a dry cloth.

z Never use a moistened or wet cloth.

→May result in a malfunction.

Caring for Other Plastic Parts

Soak a soft cloth in lukewarm water mixed with a small amount of mild detergent, thoroughly wring it out, and wipe off any dirt. Then wipe with a dry cloth so that no detergent remains.

z Do not use alcohol-based or other household cleaning products or abrasives because they may scratch or crack the finish or cause the color to change.

16

SESSIONS & SELECTIONS

Note: Upon the conclusion of any pre-programmed or manual operation of the chair, your chair will not restore to the upright position. This is designed to keep you in your relaxed and quiet “zone” for as long as you wish to remain there.

Unless otherwise noted, all auto and manual massage programs last approximately 15 minutes.

Pre-Programmed Massage Sessions

There are a total of fourteen pre-programmed massage sessions from which you can choose.

If you desire, you can combine a sequence of two pre-programmed massage sessions by selecting your first pre-programmed massage session, then immediately select your second massage session (while all the buttons on the remote are flashing, ~ 5 seconds). When two massage programs have been strung together, the button of the first selected session will glow continuously while the second selected session will flash intermittently.

Auto Sessions - Five Pre-programmed Massage Sessions

The Brookstone Signature™ Massage Chair is programed with five preset auto sessions providing easy-touse massage options optimized to meet your needs. Each of the below sessions can be run by pressing and quickly releasing the session button. A deep relaxation version is available for all sessions, excluding Quick.

To activate, press and hold the session button for 2 seconds. The session button will glow ice blue indicating deep relaxation session has been activated.

No.

Button Action

1

This program lasts six (6) minutes and incorporates massage and heat. It is designed to quickly refresh the entire body.

2

3

4

5

A comprehensive, full-body massage program recommended for those who feel fatigued and wish to rejuvenate their body and mind.

A full-body session recommended for use just before bed or to clear the mind and meditate. It is choreographed to move blood from the core of your body toward your extremities, relaxing you and quieting your body for sleep or meditation.

This program is recommended for use just after waking. It will help rejuvenate blood flow from your extremities toward the core of your body, waking you up and preparing your body and mind for the day ahead.

This program is recommended for those experiencing stiffness in their neck, shoulders or lower back. It performs a posture straightening operation by soothing the muscles around the spine and then providing choreographed back extension movements.

17

SESSIONS & SELECTIONS

Stretch Sessions - Five Pre-programmed Massage Sessions

The Brookstone Signature™ Massage Chair offers five pre-programmed stretch sessions to help mobilize all levels of your spine. Select one or more of the following options.

No.

Button

1

Action

Offers numerous stretching movements, such as hip rotation and back extension, combined with a variety of massage techniques. The session is designed to help stretch and loosen the muscles of the entire body.

2

3

4

Kneading massage centered around the neck and shoulders is designed to loosen the muscles of the upper back.

An excellent back extension with a series of movements achieved by using the shoulder stabilizers to hold the shoulders down and back while repeatedly changing the position of the seat back.

This session will help loosen the hip area by utilizing the seat air cells to rotate the hips and the muscles located in the hip area.

5

This session focuses on stretching the chest by using the shoulder stabilizers to hold the shoulders down and back while the rollers move up and down the back in a carefully choreographed pattern.

Targeted Sessions - Four Pre-programmed Massage Sessions

The Brookstone Signature™ Massage Chair is pre-programed with four targeted sessions providing targeted massage to specific areas of the body.

No.

Button Action

1

This session performs a kneading massage to soothe and loosen the muscles of the neck and upper back.

2

This session performs a kneading massage to soothe and loosen the muscles between the shoulder blades. Targets the upper back and mid-back.

3

4

This session performs a Shiatsu type massage to soothe and loosen the muscles around the neck, shoulder blades, and mid-back.

This session performs a kneading massage to soothe and loosen the muscles around the lower back and hip.

18

Manual Functions

Manual Functions

The Brookstone Signature™ Massage Chair allows you to manually control each of the chair’s movements.

You can combine your favorite massage types as well as adjust speed, intensity, and roller positions to suit your particular needs. These are the manual massage movements available in your chair:

No.

Button Action

Can be combined with ...

Knead

&

Tap/Knead

Forward

&

Reverse

Air Cell

Controls

1 Kneading.

N/A

○ ○

2 N/A

○ ○

3

4

5

6

Simultaneous kneading and tapping.

Forward kneading that grasps and kneads muscles.

Moves toward the spine.

Backward kneading. Moves away from the spine.

Activates the Octet mechanism to work in opposing directions up and down the back.

Activates the Octet mechanism to work in unison up and down the back.

○

○

N/A

N/A

N/A

N/A

N/A

N/A

○

○

○

○

Air Cell Controls

The Brookstone Signature™ Massage Chair is set with air cells throughout. The air massage functions are recommended for those who prefer a soft massage. In the manual mode, air cell functions may also be combined with other massage movements.

No.

Button Action

Can be combined with ...

Knead

&

Tap/Knead

Forward

&

Reverse

1

Activates air massage around your arms, shoulders, feet and seat area.

○ ○

2 Activates air massage for the shoulders and arms.

○ ○

3

Activates air massage for your lower back, buttocks and your feet.

○ ○

19

PRE-PROGRAMMED MASSAGE SESSIONS

Pre-programmed Session Massages

z 14 automatic sessions provide a variety of different massages to relieve fatigue.

z By using the session buttons to select session that meets your needs, massages are performed based on a preset menu.

How to Operate

❶

❷

❸

❶ Press the Power button.

If no session is selected within 5 minutes, the power to the remote control switches off automatically, and the Power button flashes.

The Power button light switches off after 2 minutes.

❷ Press the desired session button.

Choose the desired session.

The chair will recline for a short time.

❸ The shoulder positions can be adjusted.

After the shiatsu points are located, the up/down buttons for shoulder position adjustment flash alternately. The shoulder positions can be adjusted while the buttons flash. If no adjustment is required, do not use these buttons.

[Note]

Please place your head on the headrest while

you are seated deeply in the chair in a comfortable position. If your body is raised off the chair, shiatsu points cannot be located accurately.

❹ The session starts.

When shiatsu point locating is completed, the session starts. During a session, you can adjust the mechanical or air intensity.

Shoulder Position Adjustment

If the shoulder positions are incorrect, use the Massage position adjustment buttons to adjust the shoulder positions.

Caution

p

The rollers move up while this button is pressed.

When the rollers have reached their upper limit, the p button lamp switches off, and the q button lamp switches on.

Too high q

The rollers move down while this button is pressed.

When the rollers have reached their lower limit, the q button lamp switches off, and the p button lamp switches on.

Correct position

Too low

Mechanical Intensity Adjustment

The mechanical intensity can be adjusted in 3 levels.

Each time the button is pressed, the intensity changes in the order of Low, Medium and High.

(The default setting when the session starts is Medium.)

When the mechanical intensity is Low, Medium, or High, the buttons light in green, orange, or red, respectively.

z When the shoulder positions are too high, adjust so that the back of your head is not contacted.

→ May result in injury.

z Adjust the intensity to match your physical condition.

→ Using the chair continually with a strong stimulus may result in injury.

20

Air Massage Intensity Adjustment and Cancellation

The air massage intensity can be adjusted.

Each time the Air intensity button is pressed, the intensity changes in the order of Low,

Medium and High.

(The default setting when the session starts is Medium.)

When the air intensity is Low, Medium, or High, the buttons light green, orange, or red, respectively.

❺ The program finishes.

When the massage program finishes, the rollers return to their storage positions (upper part of the seat back) and the power to the remote control is shut off.

However, reclining the seat back, angle adjustment of the footrest, and ON/OFF of the heater are still enabled.

When 2 sessions have been combined, at the conclusion of the first selected session, the second selected session commences and the button for the second session changes from flashing intermittently to a steady glow. The second session then commences.

Changing the Massage Program

You can change to another program without having to wait until the current program finishes. However, note that after a total duration of 30 minutes, the program in progress stops even if not completed.

Switching from One Preset Program to Another

When a preset program button is pressed while another preset program is in progress, the rollers return to the previously detected shoulder positions, and the shoulder positions are checked again before the program starts. You can adjust the shoulder positions while they are being checked again.

Switching from a Preset Program to a Manual Program

When a manual program button is pressed while a preset program is in progress, the preset program immediately stops, and the selected operation starts.

When the movement to detect the shoulder positions was selected, the session restarts after the shoulder positions were reconfirmed. The shoulder positions can be adjusted while the shoulder positions are being reconfirmed.

Stopping in the Middle of a Massage

If the Pause button is pressed, all the massage movements pause. To restart the massage, press the Pause button. To stop in the middle of a massage, press the Power button. The rollers return to their storage positions and stop. After movement has stopped, use the Reclining buttons to raise the reclined backrest.

Caution

z If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If it still feels too strong, stop operation immediately and contact Inada.

→ May result in injury if you continue use with high stimulation under such circumstances.

z Do not place your hands or feet into the roller tracks, into the space between the seat back and the seat or into the moving parts.

z Do not sit wearing hard objects, such as hair accessories or jewelry.

z If your leg or foot comes out of the footrest during the massage, do not try to force it back in.

z Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for an area-specific massage of any particular part of the body.

→ Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired effect, or even injury.

The total amount of massage time in a day should be limited to about 30 minutes.

21

MANUAL FUNCTIONS

Manual Session Massages

The desired massage menu can be selected.

How to Operate

❶

❷

❸

❶ Press the Power button.

If no session is selected within 5 minutes, the power switches off automatically, and the Power button flashes.

The Power button lamp switches off after 2 minutes.

❷ Press the desired session button.

Select the desired massage from kneading, tapping, rolling, and air massage.

❸ The shoulder positions can be adjusted.

After the shiatsu points are located, the up/down buttons for shoulder position adjustment flash alternately. The shoulder positions can be adjusted while the buttons flash. If no adjustment is required, do not use these buttons.

❹ The session starts.

When shiatsu point locating is completed, the session starts. During a session, you can adjust the mechanical or air intensity.

❺ The session finishes.

When the massage program finishes, the rollers return to their storage positions (upper part of the seat back) and the power to the remote control is shut off.

However, reclining the seat back, angle adjustment of the leg rest, and ON/OFF of the heater are still enabled.

Roller Position Adjustment

p

The rollers move up while this button is pressed.

When the rollers have reached their upper limit, the p button lamp switches off, and the q button lamp switches on.

q

The rollers move down while this button is pressed.

When the rollers have reached their lower limit, the q button lamp switches off, and the p button lamp switches on.

22

Mechanical Intensity Adjustment

The mechanical intensity can be adjusted in 3 levels.

Each time the button is pressed, the intensity changes in the order of Low, Medium and High.

(The default setting when the session starts is Medium.)

When the mechanical intensity is Low, Medium, or High, the buttons light in green, orange, or red, respectively.

Air Massage Intensity Adjustment and Cancellation

The air massage intensity can be adjusted.

Each time the Air intensity button is pressed, the intensity changes in the order of Low,

Medium and High.

(The default setting when the session starts is Medium.)

When the air intensity is Low, Medium, or High, the buttons light green, orange, or red, respectively.

Changing Sessions

Switching from a Manual Session to a Pre-programmed Session

When a pre-programmed session button is pressed while a manual session is in progress, the operation changes to the pre-programmed session. After 30 minutes, the session in progress stops even if not completed.

Stopping in the Middle of a Massage

If the Pause button is pressed, all the massage movements pause. To restart the massage, press the Pause button. To stop in the middle of a massage, press the Power button. The rollers return to their storage positions and stop. After movement has stopped, use the Reclining buttons to raise the reclined backrest.

Caution

z If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If it still feels too strong, stop operation immediately and contact Inada.

→ May result in injury if you continue use with high stimulation under such circumstances.

z Do not place your hands or feet into the roller tracks, into the space between the seat back and the seat or into the moving parts.

z Do not sit wearing hard objects, such as hair accessories or jewelry.

z If your leg or foot comes out of the footrest during the massage, do not try to force it back in.

z Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for an area-specific massage of any particular part of the body.

→ Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired effect, or even injury.

The total amount of massage time in a day should be limited to about 30 minutes.

23

TROUBLESHOOTING

If you encounter problems with operating the Brookstone Signature™ Massage Chair, please check the following points to see if they can be rectified. If the Brookstone Signature™ Massage Chair still malfunctions or does not work, please switch off the Main Switch and remove the power plug from the electrical outlet.

Contact Inada at 303.572.5000 for service. Do not dismantle or attempt to repair the Brookstone

Signature™ Massage Chair yourself. Doing so will void the warranty and neither Brookstone nor

Inada will bear any responsibility for any subsequent consequences.

Problem Cause & Solution

The right and left rollers are out of alignment.

The rollers moved up to the top and then stopped.

The rollers stop during the massage.

The rollers are designed with an alternating tapping mechanism, so in the stopped position they are sometimes out of line. This is part of their design and there is nothing wrong with the chair.

The auto timer will cause the rollers to move up to the top of the chair when the massage time is finished, so as not to interfere with your movements when getting out of the chair.

Sometimes when there is too much pressure to the rollers, they can stop moving temporarily. Slightly lift your body or lightly raise the reclining seat back. (Persons weighing 265 lbs or more must be especially careful when using this chair.)

A clattering sound is made during a massage and the rollers vibrate a lot.

This occurs while the rollers are moving when they fall back to their original position after passing over a part of the body or fabric.

The Pause button and program buttons on the remote control flash.

The automatic shiatsu point locator is not working properly.

(The height of the rollers does not match the shoulders.)

Turn off the main power switch on the back left of the chair, and then back on after about 5 seconds.

Remote control buttons do not seem to be operating normally or the power does not turn on.

The power cord or plug is abnormally hot.

Sit further back in the chair so that your head rests firmly on the headrest. You can adjust the shoulder position with the Roller buttons immediately after the shiatsu points are located.

Check for the following:

① Is the power plug fully inserted into the wall outlet?

② Is the main power switch on the back left of the chair on?

③ Are you pressing two buttons at the same time?

Stop using immediately.

For details, contact your Inada Chair Doctor.

Anyone other than an authorized serviceperson must not repair or disassemble the chair.

24

Noise during chair operation

The following noises are made during operation.

Noises during tapping

Sound of the rollers rubbing against the seat cover during kneading

Sound of raising and lowering the rollers, sound of roller operations

Sound of the air massage cushions

Sound of the air pump

Sound of air discharge

Sound of raising and lowering the reclining seat back

*The sounds above are normal and do not affect performance.

PRODUCT CARE & STORAGE

Regular Maintenance Will Preserve the Life of Your Chair

Have you experienced any of these problems?

● The chair does not start when the main power switch

is turned on.

● The power cord has been cracked or scratched.

● The power cord or plug becomes abnormally hot.

● The chair produces a burnt smell, abnormal sound or

vibration.

● The auto timer function does not work in some cases.

● Other failures.

If you experience anything listed on the left, stop using and unplug the power plug from the wall outlet to prevent failure or an accident. Be sure to contact

Inada for maintenance.

To use safely

The chair fabric (roller fabric) is a consumable part, and its service life is three years (conditions of use: two 15-minute sessions a day, every day).

*The service life varies depending on the conditions of use.

* After about five years of use, a professional inspection is recommended even if there are no symptoms or problems.

25

FAQ

Can I put the chair onto a wooden floor or a heated floor?

Yes.

However, because the chair could damage the floor surface, we recommend laying a carpet or something similar under the chair.

(Same applies to other floor surfaces)

I spilled water on the chair. What should I do?

There is a danger of an electric shock. Immediately stop using the chair and perform the following.

● Turn off the main power switch on the back left of the chair.

● Unplug the power plug from the wall outlet.

After performing the above, contact Inada for assistance.

Can someone who is under 5 feet or over 6 feet use the chair?

Yes.

Because the correct shoulder positions may not be found during shiatsu point locating, we recommend using the chair as follows.

● Short person: Raise the reclining seat back.

● Tall person: Recline the reclining seat back.

● After shiatsu point locating is performed, adjust the shoulder positions.

How do I make the massage stronger?

Perform any of the following:

● Sit back further in the chair so that your weight is against the reclining seat back.

● Lower the reclining seat back.

● Remove the buffer pad placed on the back pad.

● Use the foot shiatsu pads.

With the methods above, you can intensify the massage.

How do I make the massage lighter?

Perform any of the following:

● Raise the reclining seat back.

● Place the buffer pad on the back pad.

● Remove the foot shiatsu pads.

With the methods above, you can make the massage more gentle.

26

AFTER SALES SERVICE

1. Warranty

Please read the contents carefully and keep it in a safe place. Please complete and mail in the warranty card that was included with your chair.

If the chair is to be used outside the home (in a commercial setting, for example), fees will be charged for repairs.

2. Repairs & Service

Before calling for repairs or service, use the Troubleshooting guide on pages 24-25 to see if the problem can be solved easily. If the problem persists, contact Inada for assistance. Have the following information ready.

1) Your name, address and telephone number

2) Model number: See the specification field on page 28 of this Operating Manual, or the company plate affixed to the back left of the chair.

3) Serial No.: See the company plate affixed to the back left of the chair.

4) Purchase date

5) Malfunction condition (give as much detail as possible)

Example: When the remote control buttons flash as shown in the figure on the right, include the names of the flashing programs.

● If the warranty is valid:

Please have your proof of purchase when you call for the repair. In some cases a charge will be applied even if the warranty period has not elapsed. Read the warranty certificate carefully.

● If the warranty has expired:

Contact Inada. If the product can be repaired, we will give you an estimate of the cost to repair the product.

● Minimum storage period for service parts:

We will stock service parts (except fabric) for this electric massage chair for a minimum of five years after terminating the production of the model. The service parts are those necessary for maintaining the function of the product.

● For more information on after sales service:

Contact Inada.

27

SPECIFICATIONS

Model Name

Name & Model Number

Power Supply

Power Consumption

Rated Time

Kneading Speed

Tapping Speed

Up/Down Speed

Back Stroke Range

Preset Sessions

Brookstone Signature™ Massage Chair

HCP-S8900A

AC120V

∼ 60Hz

160W

30 minutes

From minimum 5 times/minute to maximum 20 times/minute (approx.)

From minimum 220 times/minute to maximum 450 times/minute (approx.)

From minimum 1.3 inches/second to maximum 2 inches/second (approx.)

Approx. 29 inches (in partial rolling massage: approx. 61 inches)

14 types

Manual Sessions

Air Pressure

Dimensions

Chair Weight

9 types

Approx. 30 kPa

Program Timer

Approx. 15 minutes

Footrest Adjustment Range

Approx. 10.5 inches

Reclining Angle

Approximately 115° to 160° against flat floor

Approx. 34″L x 54″W(68.5″W) x 42″H(30″H)

The depth and height figures in parentheses ( ) represent the dimensions when the chair is fully reclined and the footrest is flat.

Approx. 187 lbs (net weight)

Outer Covering

Synthetic leather

Supplied Items

Shipping Dimensions

Shipping Weight

Power cord, T-shaped wrench, screws, washers, shiatsu balls (2), Shiatsu Pad (L/R)

Box 1: 73″L x 27″W x 27″H

Box 2: 49″L x 17″W x 29″H

Box 1: 182 lbs

Box 2: 76 lbs

Recommended User Weight

265 lbs (max)

28

WARRANTY

For warranty information, please visit www.inadausa.com/warranty-support.com.

We recommend that you print this information at the time of your purchase and keep it with your Operating

Manual.

29

For technical assistance in the USA please call 303.572.5000 or email [email protected].

We welcome comments and feedback about your buying experience and your experience using your chair.

We invite you to email us at [email protected].

We hope you enjoy your new, world-class massage experience!

Manufactured by FAMILY INADA CO., LTD.

2-1-3 Nishi-Miyahara, Yodogawa-ku, Osaka 532-0004, Japan

DATE OF ISSUE (day/mo/yr)

1/7/2015

Made in Japan

778933300