FAX-JX510P specification sheet
JX510P Fax Unit Type Type Compatibility Applicable line Print Technology Scanner type Fax Scanning Features ADF Document Size Effective Scanning Width Scanning Speed fax resolution Image Processing system Halftone Printing features Printing Method Print Speed Print resolution Paper capacity Standard facsimile with Telephone answering machine and handset Group 3 PSTN Inkjet printing Sheet fed 20 sheets Width: 216mm(max) ~ 105mm(min) Length: 400mm(max) ~ 105mm(min) 208mm 10 seconds per page 6 pages per minute Fine: 8 dots x 7.7 lines/mm Standard: 8 dots x 3.85 lines/mm UHQ 256 shades of grey scale Print Cartridge Printing Width Ink save mode Auto Image Reduction on reception Inkjet printing ESAT : 5.5 ipm  600x600dpi 100 sheets or 11mm (whichever is less) PG-40 (included) or high-capacity PG-50 PG-40: approx. 615 pages (approx. 725 pages in ink saver mode) PG-50: approx. 895 pages (approx. 1050 pages in ink saver mode) 203mm Yes Yes Transmission & reception features Transmission speed Modem Speed Compression method Direct Transmission Quick memory transmission Fax memory Memory backup Error Correction Mode (ECM) Delayed transmission Sequential broadcast Polling reception Approx. 3 seconds per page (ITU-No.1 chart) 33.6kbps MH, MR, MMR Yes Yes Approx. 120 pages Yes (FLASH memory) Yes Yes (110 locations) Yes (110 locations) Yes Security & management features Direct mail prevention Yes Transmission header Activity report, Transmission report, Reception report, Multi TX/RX reports, Onetouch/Coded speed dialing list, User’s data list, Doc. memory list Yes Telephony features One touch dials Coded dials Redial Fax/Tel auto switch Extension hook-up Remote reception On hook key Caller ID Telephone Handset 9 Locations 100 Locations Yes Yes Yes Yes Yes Yes  Yes Reports & lists Built-in answering machine Built-in answering machine Type Total recording time Number of messages Max time per message OGM Remote operation Time stamp Message back-up Call screening Toll saver Copier Features Mono Copy Copy Resolution Copy Speed (mono) Multiple copy Display type Display Size Display languages General Features Dimensions with handset and without tray Weight Power Source Power consumption Yes Digital Approx. 30 mins 50 (max) 60/120/240 seconds (user selectable) 1 normal (max 20 seconds) and 1 when used when memory full Yes Yes (LCD only) Yes Yes Yes Yes Print 600x600 dpi, scan 8dots ×7.7 lines /mm ESAT : 4.5 ipm  Up to 99 copies LCD 16x1 16 languages ( English, German, French, Spanish, Italian, Swedish, Norwegian, Dutch, Finnish, Danish, Portuguese, Slovenian, Czech, Hungarian, Russian, Polish ) approx W400 x D269 x H174mm approx. 4.1kg AC 200-240V 50-60Hz Approx. 0.9W (Off), 1.7W (sleep), 39W (Maximum) Footnotes Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage etc. and does not take account  data processing time on host computer. Document print speed on plain paper is measured on the test standard of ISO/IEC FCD 24734. To use this feature, you will need to subscribe for a Caller ID service (only available in some countries). The Caller ID feature uses the ETSI EN 300 778-1  protocol. Contact your local telephone company for detailed information on this service. Copy speed may vary depending on document complexity, copy mode, page coverage etc. and does not take into account warming up time.  FSOT and ESAT ADF copy speed on plain paper is measured on the test standard of ISO/IEC FCD 24735.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project