Honda eu2000i Generator Owner's Manual

Honda eu2000i Generator Owner's Manual

Add to My manuals
1 Pages

The Honda eu2000i, is a portable generator designed for providing power in various situations. This generator is safe and complies with safety standards for portable generators. The eu2000i features a built-in circuit protector to safeguard the unit and the connected equipment. Depending on the specific load, it can operate for several hours on a single tank of fuel. The generator is lightweight and easy to transport due to its compact design.

advertisement

Honda eu2000i Generator Owner's Manual | Manualzz

Extracted from Honda eu2000i Generator Owner's Manual Wiring Diagram (Notations added):

Honda eu2000i Generator Measured Voltages: This is as designed and intended.

Hot to Neutral 126v It is considered safe & meets code for a portable generator.

Hot to Ground

Neutral to Ground

0v

0v

The neutral & ground are NOT bound.

A ground fault tester looks for a match between the Hot to Neutral and Hot to Ground.

It will show a ground fault.

My tester's report of 0.0v vs. 60v Hot to Ground and Neutral to Ground is a result of lower impedance than needed to read it (Inferred - Not sure of this).

Solution to line monitor ground fault alarm -- disconnect the line monitor.

GROUNDING NOTES:

1) The generator need NOT be grounded when hooked to a trailer. The ground is to the generator's frame.

2) If the generator is hooked into a fixed structure's wiring (ex. as backup), the generator should be grounded to the fixed structure's grounding rod. This is in addition to an isolation switch so you don't kill a lineman from the power co.

Our House Outlet Measured Voltages:

Hot to Neutral 121v

Hot to Ground

Neutral to Ground

121v

0v

This is as designed and intended.

It is considered safe & meets code for a fixed structure.

The neutral & ground ARE bound.

A ground fault tester looks for a match between the Hot to Neutral and Hot to Ground.

It will show NO ground fault.

advertisement

Key Features

  • Portable Design
  • Safe and Code Compliant
  • Circuit Protector
  • Extended Operation Time
  • Lightweight and Compact
  • Quiet Operation
  • Fuel-efficient

Frequently Answers and Questions

How do I ground the eu2000i generator when using it as backup power for a fixed structure?
When connecting the generator to a fixed structure's wiring, you should ground the generator to the fixed structure's grounding rod. This requires an isolation switch to protect a lineman from the power company in case of a fault.
Why does my ground fault tester show a fault when connected to the eu2000i?
The eu2000i generator is designed with a neutral and ground that are not bound, meaning they are not electrically connected. This design is intended for safety and code compliance in portable generators. The tester looks for a match between the hot and ground, resulting in a detected fault.
Can I use the eu2000i generator without grounding when connected to a trailer?
Yes, the generator does not need to be grounded when hooked to a trailer. The ground is to the generator's frame. Grounding is not required for this scenario.

Related manuals

Download PDF

advertisement