Sony DPP-SV55 Operating instructions

Sony DPP-SV55 Operating instructions
Editing, Setting, and Saving Images
Adjusting the pictures
Editing an image
Effect menu bar
Cursor
By using the EFFECT menu, you can edit and
adjust an image. The basic operations for the
EFFECT menu follow:
1 Select the image to be edited in the thumbnail list
2
or press PICTURE to display the preview of the
image to be edited.
Press EFFECT.
The preview image and the EFFECT menu bar are
displayed.
on the menu bar and press ENTER.
The cursor moves to the sub menu.
Press B/b to move the cursor to “ADJUST” on the
menu bar and press ENTER. Then press V/v to
move the cursor to the desired adjustment item
and press ENTER. The adjustment slider appears
in the right on the screen. Adjust the level as
follows and press ENTER.
m
Cursor
Color deepness
Press V to deepen the colors or v
to lighten the colors.
Tint
Press V to make the picture
reddish or v to make it bluish.
Sharpness
Press V to sharpen the outlines or
v to reset them.
Sub menu
4 Press V/v to move the cursor to the desired sub
menu item and press ENTER.
The selected sub menu item is displayed. When
adjustments or settings are required, follow the
guide message on the screen.
1 Press INPUT SELECT to light on “MEMORY
STICK” or PC CARD indicator.
m
To cancel operation
Notes
Press CANCEL to return to the screen of the
preceding procedure.
•It may take longer to process an edited image after
you press PRINT.
•Do not remove “Memory Stick” or PC card during
the EFFECT mode. If you do, the EFFECT mode
ends forcibly and any editions you have done are
canceled.
Enlarging/Reducing an image
Sepia
Makes the image like a painted picture.
Viewing the “Memory
Stick” or PC card images
Note
To display another sub menu
Before you begin, make sure that either ALL or DPOF
indicator of AUTO PRINT button does not light.
Press V until the current sub menu disappears. Then
press B/b to move the cursor to the desired item on
the menu bar and press ENTER.
Note
Making an index print of “Memory Stick” or
PC card images
Changing an image position
1 Press INPUT SELECT to light on “MEMORY
Move
Rotate 90°
Clockwise
The MENU bar is displayed.
3 Press B/b to move the cursor to “INDEX PRINT”
The image rotates 90°
clockwise.
5 Press the arrow (B/b/V/v) button to move the
Rotate 90°
The image rotates 90° counterCounterclockwise clockwise.
cursor to “Execute,” then press ENTER.
The index list of the “Memory Stick” or PC card
images is printed with each image in the selected
pattern. Each thumbnail has a corresponding image
number. When the “Date Print” is selected, the shot
date (year, month and day) is also printed.
Notes
• You cannot make an index print during
the CREATIVE PRINT or EDIT mode.
• An image which is not displayed because
it is damaged or has some kind of trouble
will not be printed.
You can save the image being edited by the EFFECT menu, or processed by the CREATIVE
PRINT menu onto a “Memory Stick” or PC card.
Setting items
Items
Settings
Contents
Auto Fine Print
ON
Adjusts an image automatically for printing in
better picture quality. Auto Fine Print function is
especially effective to adjust a dark and lowcontrast image.
Notes
• The image displayed on the screen is not adjusted.
• When printing from a computer, the Auto Fine Print
function does not work.
• You cannot change the setting during the CREATIVE
PRINT mode.
button to select “Yes” or the destination (“Memory Stick” or PC
•If the “Memory Stick” or PC card is in write
protect status, you cannot save an image on the
“Memory Stick” or PC card.
•During saving the image, do not turn off the power
or remove the “Memory Stick” or PC card from the
insertion slot. The “Memory Stick” or PC card
may be damaged.
Finish
Border less print
OFF
Prints an image without making adjustments.
Glossy
Prints an image vividly with glossy finish.
Texture
Prints an image softly with uniform uneven finish.
ON
Prints an image without borders around the image.
Notes
Changing the printer settings
• You cannot make borderless print with Small Size print
paper.
• When printing 4:3 picture, the upper and bottom ends
of the image are cut and printed in a 3:2 picture.
Date Print
The MENU bar is displayed.
OFF
Prints an image with borders around the image.
(Both 4:3 and 3:2 pictures will not be cut off.)
ON
Prints an image with the date recorded together
with the image shot with your digital still camera.
Notes
2 Press B/b to move the cursor to “SET” and press
ENTER.
The cursor moves to the SET sub menu.
2 Press MENU.
The MENU bar is displayed.
• You can print the date only when the image’s date data
is recorded in the DCF (Design rule for Camera File
system) format.
• You cannot change the setting during the CREATIVE
PRINT mode.
3 Press V/v to move the cursor to the desired
3 Press B/b to move the cursor to “SLIDESHOW”
setting item and press B/b and ENTER to change
the setting.
For detailed settings, see “Setting items.”
and press ENTER.
4 Press B/b to move the cursor to the desired
switch time of images and press ENTER.
4 After finishing setting, press MENU.
5 Press the arrow (B/b/V/v) button to move the
Press CANCEL.
Saving an image to a
“Memory Stick” or PC card
 2000 Sony Corporation
1 Press MENU.
STICK” or PC CARD indicator.
To stop slideshow
DPP-SV55
from the insertion slot. The “Memory Stick” or PC
card may be damaged.
•An image, once deleted, will be lost forever. Before
deleting an image, double-check that it is the right
one.
•When formatting a “Memory Stick,” all the files
except for the image files will be deleted.
You can change the printer settings using the SET
menu as follows:
1 Press INPUT SELECT to light on “MEMORY
cursor to “Execute,” then press ENTER.
The images in the “Memory Stick” or PC card are
displayed one after another in the selected switch
time like a slideshow.
•If the “Memory Stick” or PC card is in write
protect status, you cannot delete images or format
the “Memory Stick.”
•During deleting or formatting, do not turn off the
power or remove the “Memory Stick” or PC card
Notes
Viewing the slideshow
Image moves
Notes
card) and press ENTER.
The image is saved.
pattern and press ENTER.
m
You can format a “Memory Stick.” In step 4, select
“Memory Stick Format” and press ENTER. When the
confirmation dialog box is displayed, press the arrow
(B/b) button to select “Yes” and press ENTER. The
“Memory Stick” is formatted and all the image files
and other files are deleted at one time.
2 Press the arrow (B/b/V/v)
and press ENTER.
4 Press B/b to move the cursor to the desired split
You cannot delete an image during the
CREATIVE PRINT or EDIT mode.
When either “Memory Stick” or PC card is inserted, a confirmation dialog box is displayed.
When both “Memory Stick” and PC card are inserted, a dialog box to select the destination is
displayed.
2 Press MENU.
Move the picture with
B/b/V/v, then press ENTER.
Note
1 Press SAVE.
STICK” or PC CARD indicator.
Press B/b to move the cursor to “EDIT” on the
menu bar and press ENTER. Then press V/v to
move the cursor to the desired item on the EDIT
sub menu and press ENTER:
6 Press ENTER.
Formatting a “Memory Stick”
Press B/b to select “Exit” and press ENTER. Or
press MENU.
The picture quality of an enlarged image may be
deteriorated depending on its size.
trash icon to the image you want to delete, then
press ENTER.
press ENTER.
The selected image is deleted. You cannot delete
an image protected or preset by DPOF.
To delete other images, repeat steps 5 through 7.
To return to the preceding procedure, press
CANCEL.
Monochrome Makes the image into a monochrome
picture.
To return to the previous image
– Editing and adjusting an image
– Adding a special effect to an image
– Making a variety of prints such as split-images, calendar,
card, and sticker
– Changing printer settings
– Viewing, deleting, or saving images in a “Memory
Stick” or PC card
Before reading this manual, read “Operating Instructions
– Basic Operations.” Also refer to “Operating
Instructions – Software Guide/Additional Information.”
m
7 Press the arrow (B/b) button to select “Yes” and
You can make an index list of the images saved in a “Memory Stick” or PC card (Index Print),
or perform the slide show of the images. When you want to search for an image, you can find it
easily with these functions.
To enlarge an image, select “+” on the menu bar
with B/b.
To reduce an image, select “–” with B/b.
Then press ENTER. Each time you press ENTER,
the image is enlarged or reduced:
•–: up to 60%
•+: up to 200%
This manual explains advanced operations for the
printer including:
A confirmation dialog box is displayed.
Makes the image like an old
photograph with faded colors.
Paint
Before operating this printer, please read this manual
thoroughly and retain it for future reference.
5 Press the arrow (B/b/V/v) button to move the
Press B/b to move the cursor to “FILTER” on the
menu bar and press ENTER. Then press V/v to
move the cursor to the desired filter you want to
add to the image then press ENTER:
Press V until the current sub menu disappears.
Then repeat steps 3 and 4 to display and work in a
sub menu of another menu item.
Operating Instructions – Advanced Operations
and press ENTER.
The thumbnail list is displayed. When you
displayed a preview image in step 1, the trash
icon is attached to that image.
Adding a special filter to an image
To display another sub menu
3 Press B/b to move the cursor to “DELETE/
4 Press V/v to move the cursor to “Deleting Image”
When editing ends...
To reset to the previous image settings
The MENU bar is displayed.
FORMAT” and press ENTER.
The cursor moves to the sub menu.
The picture quality of the image being displayed on
the screen may differ from that of the printed image.
Press B/b to select RESET and press ENTER. When
a confirmation dialog box appears, press B/b to
select “Yes” and press ENTER.
Digital Photo Printer
2 Press MENU.
Note
To print the edited image: Press PRINT.
To return to the previous screen: Press EFFECT.
To perform other editing: Repeat steps 3 and 4.
To save an edited image: Press SAVE to save the
edited image in the “Memory Stick” or PC card.
3-205-184-12(1)
You can delete the selected images on a “Memory
Stick” or PC card.
Press V to brighten the picture or
v to darken it.
Brightness
3 Press B/b to move the cursor to the desired item
Deleting images of a
“Memory Stick” or PC card
Notes
• Depending on the image, it may take time
to be displayed.
• You cannot view the slideshow during the
CREATIVE PRINT or EDIT mode.
Note
The items which cannot be changed are
displayed in gray and cannot be selected.
Beep
The settings become effective and the previous
screen is displayed.
The settings remain effective even after you turn off
the printer until they are changed.
To display another sub menu
To cancel operation
Press CANCEL while the cursor is in the SET sub
menu. The settings will be reverted.
Press V until the current sub menu disappears. Then
press B/b to move the cursor to the desired item on
the menu bar and press ENTER.
Printed in Japan
OFF
Prints an image without the data.
ON
The warning and operation sound beeps.
OFF
The warning and operation sound does not beep.
Using CREATIVE PRINT Functions
6
Making various prints
The preview reflecting your selections up to the preceding step is displayed.
The greeting is displayed in the selected color.
You can use CREATIVE PRINT button to make various prints. The messages displayed on the
screen will guide you to complete a print.
7
1
Press CREATIVE PRINT.
The CREATIVE PRINT top menu is displayed.
CARD
CALENDAR
STICKER
Makes 9-split images sticker.
SPLIT IMAGES
Makes 4-split or 9-split
images print.
EXIT
8
then press ENTER.
When you select “CALENDAR” in the CREATIVE
PRINT menu, you can add a selected calendar to
an image or images to make an original calendar.
The window to adjust the image position is
displayed.
9
Press the arrow (V/v) button to move the cursor to the desired
adjustment item, then press ENTER.
To make multiple adjustments, repeat this step.
Each time you press ENTER, the image is reduced.
Move
Move the picture with B/b/V/v, then press ENTER.
left in a calendar).
Press V/v to select “Start date” and press B/b to
move the cursor to “Sunday” or “Monday.”
Then press ENTER.
Some templates do not have the “Start date”
setting.
Each time you press ENTER, the image rotates 90° clockwise.
Each time you press ENTER, the image rotates 90° counterclockwise.
10Press the arrow (V/v) button to move the cursor to “NEXT,”
then press ENTER.
Repeat steps 8 through 10 until you select and adjust the remaining images and then
character input window is displayed.
Press the arrow (B/b/V/v) button to move the
cursor to the desired item, then press ENTER to
input a character.
Character input box
Character table
1 Select the font in the “FONT” box and the
color in the “COLOR” box.
2 Select a character in the character table.
The selected character is input in the selected
font and color in the input box.
Press ENTER.
The window for selecting a greeting is displayed.
Select “B” or “b” on the screen to move the
cursor in the input box after the character you
want to delete. Then select “BS.” The character
before the cursor is deleted. Input the new
character.
Note
You cannot apply different colors or fonts to a single
line.
12Press the arrow (B/b/V/v) button
to move the cursor to “NEXT,” then
press ENTER.
Repeat steps 11 and 12 to input the remaining
lines. When you finish, the preview of the
created print is displayed.
By selecting the following button in the window,
you can do:
COPIES
Press ENTER to set the printing
quantity.
TOP MENU Returns to the CREATIVE PRINT
top menu.
EXIT
5
Press the arrow (B/b/V/v) button to move the cursor to the
desired greeting (1), then press ENTER.
The color selection window for the greeting (1) is displayed.
Exits the CREATIVE PRINT
menu.
Note
A created image that is not saved with the SAVE
button will be deleted.
Press V/v to select “Color of Day” and press B/b
to move the cursor to “Sunday in red” or “Sunday
in red/Saturday in blue.”
Then press ENTER.
5 Press the arrow (B/b/V/v) button to move the
6 Do the following steps in “Making a card” to
select and adjust an image, and print the
calendar:
7 c 8 c 9 c 10 c 13 c 14
To save the CREATIVE PRINT image
Press SAVE before you exit the CREATIVE PRINT
menu. The created image is saved in the “Memory
Stick” or PC card.
Note
To correct an input character
Press CANCEL to return to the screen of the
preceding procedure.
Press SAVE before you exit the CREATIVE PRINT
menu. The created image is saved in the “Memory
Stick” or PC card.
Note
A created image that is not saved with the SAVE
button will be deleted.
font (5 fonts available)
and color boxes
A created image that is not saved with the SAVE
button will be deleted.
Set the month and day for a calendar
4 Set the color of days.
cursor to “NEXT,” and press ENTER.
The preview of the created calendar is displayed.
11Input characters.
4
calendar.
Press V/v to select “Start month” and press B/b
to move the cursor to the year. To set the number,
press V/v. In the same way, set the month. Then
press ENTER.
–
To cancel operation
To save the CREATIVE PRINT image
2 Set the first month and the year starting the
3 Set the day starting the week (placed to the most
The preview of the selected template (2) is
displayed. The preview allows you to check the
preceding procedures.
adjust the image position and print the framed
image:
9 c 10 c 13 c 14
select a template. In step 2, select “CALENDAR” .
1c2c3c4
The window for setting a calendar is displayed.
Each time you press ENTER, the image is enlarged.
Press the arrow (B/b/V/v) button
to move the cursor to the desired
template (2), then press ENTER.
4 Do the following steps in “Making a card” to
1 Do the following steps in “Making a card” to
+
The Card templates are displayed.
cursor to the desired frame, and press ENTER.
The thumbnail list for selecting an image is
displayed.
image, and press ENTER.
The preview is displayed. The selected image is
inset in the selected frame.
Making a calendar
When you cancel operation or exit the CREATIVE
PRINT menu without pressing SAVE to save the
created image, the created image will be deleted.
Press the arrow (B/b/V/v) button
to move the cursor to “CARD”,
then press ENTER.
2 Press the arrow (B/b/V/v) button to move the
Note
Note
You can add a greeting and your message to
images and make an original card like the one
shown to the right.
select a template. In step 2, select “STICKER.”
1c2c3c4
The window for selecting a frame is displayed.
The CREATIVE PRINT menu disappears.
Press the arrow (B/b/V/v) button
to move the cursor to the desired
image, then press ENTER.
You can press MENU and change “Finish” and
“Beep” settings during the CREATIVE PRINT menu.
You cannot change the remaining items including
“Auto Fine Print.” The settings before the CREATIVE
PRINT is selected are effective for those items.
3
Press CANCEL. When multiple copies are being printed, the printing from the next print
will be canceled.
When you select “STICKER” in the CREATIVE
PRINT menu, you can add a frame to each 9-split
image to make a 9-split images sticker.
3 Press the arrow (B/b/V/v) button to select an
To change the printer settings midway
2
To stop printing
14Press the arrow (B/b/V/v) button to move the cursor to “EXIT,”
To cancel and restart operations midway
Making a card
Making a sticker
Printing starts.
The created CARD image that is not saved with the SAVE button will be deleted.
Exits the CREATIVE PRINT
menu.
Press CANCEL. The screen returns to the
preceding procedure; do the procedure again.
If it is difficult to return to the preceding
procedure, the dialog box to return to the top
menu is displayed. If this occurs, start from the
beginning.
13Press PRINT.
1 Do the following steps in “Making a card” to
Insert the “Memory Stick” or PC
card into the printer and press
ENTER.
The thumbnail list for selecting an image is
displayed.
Adds a selected greeting and
your input message to make
an original card.
Add a calendar of selected
month(s) to an image or
images to make an original
calendar.
Press the arrow (B/b/V/v) button to move the cursor to the
desired color, then press ENTER.
Making a split print
When you select “SPLIT IMAGES” in the
CREATIVE PRINT menu, you can make a print
with 4-split, 9-split, or 16-split images.
Do the following steps in “Making a card” to select
a template, select and adjust images for all the split
planes, and print the created split images. In step
2, select “SPLIT IMAGES.”
1 c 2 c 3 c 4c 8 c 9 c 10 c 13 c 14
To save the CREATIVE PRINT image
Press SAVE before you exit the CREATIVE PRINT
menu. The created image is saved in the “Memory
Stick” or PC card.
Note
A created image that is not saved with the SAVE
button will be deleted.
Preview of your calendar selections
9-split sticker with framed images
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement