DHC Powerline Carrier Components

DHC Powerline Carrier Components
DECORA HOME CONTROLS (DHC)
®
SECTION
Residential Grade Controllers—Green Line
K
DHC Powerline
Carrier Components
INDEX
Decora Home Controls Components Index
Overview ...............................................................K2
Controllers—Green Line
Toscana™ Deluxe Programmer ..........................K3
Wall Switch Controllers with 2-Way
Communication...........................................K4, K5
Wall Switch Controllers with Scene Capability.....K5
RF Products......................................................K6
Controllers—Red Line
Basic Programmer ............................................K7
Table Top Controller...........................................K7
Dry Contact Controllers......................................K7
Receivers—Green Line
Wall Switches with 2-Way Communication .........K8
Wall Switches with Scene Capability.............K8, K9
Plug-In Modules with Scene Capability ............K10
Receivers—Red Line
Wall Switches ..................................................K11
Remote Switches.............................................K12
Double-Pole 20A Wall Switch...........................K12
Receptacles ....................................................K13
Universal Low-Voltage Module .........................K14
Fixture Modules ..............................................K14
DHC Network Integrity Products
Panel-Mounted Surge Protective Devices.........K15
System Amplifier/Coupler/Repeater .................K16
Couplers and Attenuators ................................K16
Filters..............................................................K17
Signal Strength Indicator .................................K17
DHC POWERLINE CARRIER COMPONENTS FEATURES
Residential Grade Controllers
LEVITON’S DECORA HOME CONTROLS (DHC) RESIDENTIAL POWERLINE CARRIER COMPONENTS PROVIDE HOMEOWNERS
WITH EVERYTHING NEEDED FOR PROGRAMMED AND MANUAL CONTROL OF LIGHTING AND APPLIANCES USING THEIR
HOME’S EXISTING AC WIRING.
Our current listing of DHC components features new programmers, controllers and receivers with Scene Lighting
Capability for coordinated, whole-house lighting control. This includes models offering two-way communication,
which enables controllers in remote locations to show the On/Off status of individual lighting loads. Many new DHC
components feature Intellisense™, a Leviton exclusive technology. Intellisense reduces noise sensitivity without
reducing command signal sensitivity, resulting in the most reliable performance of any powerline carrier home
automation system available today.
Features and Benefits
I
A network of controllers and DHC switch, dimmer, fixture and receptacle receivers that communicate via
unique coded switching signals over a home’s AC wiring to automate control of lights and appliances
I DHC components replace switches and outlets, which simplifies installation compared with other
automation systems that require dedicated proprietary wiring backbones.
I An effective way to contribute to energy conservation and extend bulb and appliance life
I Offers significant security benefits to today’s homeowner, including programmed automatic and manual
home security features
Home Automation Products
Panic Button Controller
HXC1A-1TW
Toscana Programmer
HCCPG-1TW
Receptacle
Receiver
6227
Seven-Scene
Dimming Controller
HXC7S-1TW
Key Chain Remote
Controller HCCKR
Switch Receivers 6291,
6293, 6381, HXM10-1TW,
HXM06-1TW, HCS10-1SW
System Amplifier/Repeater
HCA02-10E
Plug-in Transceiver
HCPRF
Burglar Alarm Interface
6330
DHC CONTROLLERS, RECEIVERS AND NETWORK INTEGRITY PRODUCTS
DHC Controllers
DHC Controllers send
control signals to userspecified DHC address
throughout the network.
Offering includes wallmounted programmable,
plug-in, tabletop, wireless
hand-held, wall switch/
dimmer and sensor units,
plus models with 2-way
communication.
HXC7S-1TW shown
DHC Receivers
DHC Receivers can be set
to any of 256 DHC address
codes for remote/ manual
control of incandescent,
inductive, fluorescent, or
low-voltage loads. They are
available as receptacle,
plug-in, fixture and multilocation wall switches and
dimmer switches.
HXM10-1TW shown
K
2
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
Network Integrity Products
Leviton highly recommends
installing these products in
every DHC application. The
System Coupler/Repeater
ensures DHC signal integrity
throughout the house.
Panel-mount surge devices
protect DHC components
from transient voltage
surges.
51120-1 shown
DECORA HOME CONTROLS (DHC)
®
Residential Grade Controllers—Green Line
Toscana™ Deluxe Programmer
Toscana is a simple central access station that expands DHC control capability with easy onetouch access for up to 64 whole-house lighting scenes along with direct remote control of up to
256 devices. Scenes can be accessed by an IR remote or from remote scene lighting control
keypads. Toscana provides complex date/time and macro automated programming of lights
and appliances.
Timed events or up to 8 groups of timed events can be selected and run on a recurring basis
using a highly accurate internal astronomical clock. Toscana registers status changes when
DHC receivers with 2-way communication are manually changed.
Toscana Deluxe Programmer U R
DESCRIPTION
CAT. NO.
Toscana Deluxe Programmer—Rated: 120V 60Hz AC only. Power consumption: 3 watts.
White frame and white cover. Color change kits available for other colors.
HCCPG-1TW
COLOR CHANGE KITS FOR TOSCANA
Cat. No. Ivory Cover/
Cat. No. White Cover/
Ivory Frame
White Frame
DCKPG-0II
DCKPG-0WW
Cat. No. Almond Cover/
Almond Frame
DCKPG-0AA
HCCPG-1TW
Cat. No. Smoke Cover/
White Frame
DCKPG-0SW
2.25 (57.2)
2.69 (68.3)
4.73 (120.1)
1.95
(49.5)
2.34
(59.4)
8.80 (223.5)
HCCPG-1TW
SPECIFICATIONS AND FEATURES
• Simple central access station for manual control of
whole-house system
• No programming experience required—Use simple
wizards for setup
• Automatically turn appliances ON/OFF and lights
ON/OFF/DIM/BRIGHT
• Controls up to 256 devices in a DHC home system
• Leviton's patented Intellisense™ Technology virtually eliminates signal problems due to line noise
• 2-Way communication capability registers status
changes when receivers with 2-way communication are manually changed
• Permits input of real device names to specify
control (such as “wall sconce”) rather than cryptic
house and device codes (e.g. B5)
• Automatically turns lights ON/OFF at dusk and/or
at dawn (astronomical clock)
• Allows creation of up to 64 timed events that can
reoccur year annually
• Each timed event can be part of up to 8 “time
schedules”
• Create and download complex timed events and
macros using a PC with RS-232 port
• Backup and restore all system data; allows cloning
of devices using a PC with RS-232 port
• Mounts in standard 4-gang box
• No external wall transformer or powerline
interface required
• Rated 120V AC Hz, requires neutral and ground
connections
Whole House Lighting Scenes
• Create up to 64 whole-house lighting scenes to
create lighting moods
• Access any of the 64 scenes from the Toscana
front panel (8 at any one time)
• Access any seven of the scenes remotely using
the HXC7S-1TW scene keypads
• Access any of the scenes using 10 learned
infrared codes
• Learned infrared codes could be taught using any
standard IR remote
Home Automation Products
2.41 (61.2)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
COLOR
Shipped with White frame and White Cover. See
chart for color change kits.
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: A Cat. No. HCA02-10E System Amplifier
must be installed in all panels in every DHC
installation to ensure adequate signal strength.
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
DECORA HOME CONTROLS (DHC)
®
Residential Grade Controllers—Green Line
Wall Switch Controllers with 2-Way Communication U R
2.66 (67.6)
3.28 (83.3)
4.13 (104.9)
1.73 (43.9)
2.38 (60.5)
1.39
(35.3)
DESCRIPTION
CAT. NO.
One Address ON/OFF Controller—One ON/OFF rocker transmits ON/OFF commands to one
address. Shipped in White—Color change kits available for other colors.
All Lights ON/All OFF Controller—One ALL LIGHTS ON/ALL OFF rocker transmits commands to all receivers set to the same letter code as this controller. Provides “Panic
Button” lighting control for safety and security. NOTE: Receptacle receivers and Universal
Low-Voltage Module (6337) do not respond to ALL ON command. Shipped in White—
Color change kits available for other colors.
One-Address Dimming Controller—One ON/OFF rocker transmits ON/OFF commands to
one address in the same letter code as this controller. Built-in arrow-shaped rocker transmits DIM/BRIGHT commands to that same address. Shipped in White—Color change kits
available for other colors.
Two-Address Dimming Controller—Two sets of ON/OFF buttons transmit ON/OFF commands to two sequential addresses in the same letter code as this controller. One set of
DIM/BRIGHT buttons transmits BRIGHT/DIM commands to the most recently selected
address. Shipped in White—Color change kits available for other colors.
HXC10-1TW
HXC1A-1TW
HXC1D-1TW
HXC2D-1TW
No more than 4 Controllers should be installed on a single branch circuit.
HXC10-1TW
2.70 (66.7)
4.11 (104.4)
3.28 (83.3)
2.38 (60.3)
COLOR CHANGE KITS
Controller
Cat. No. Ivory
Cat. No.
HXC10-1TW,
DRK0S-0LI
HXC1A-1TW
HXC1D-1TW
DRK1D-00I
HXC2D-1TW
DCK2D-00I
DCK2D-0CI
(w/printable
labels)
Cat. No. White
Cat. No. Almond Cat. No. Gray
Cat. No. Black
DRK0S-0LW
DRK0S-0LA
DRK0S-0LG
DRK0S-0LE
DRK1D-00W
DCK2D-00W
DCK2D-0CW
(w/printable
labels)
DRK1D-00A
DCK2D-00A
DCK2D-0CA
(w/printable
labels)
—
—
—
—
—
—
1.67
(42.5)
HXC1D-1TW
3.28 (83.3)
2.69 (68.2)
1.76 (45.0)
4.40 (112.0)
Home Automation Products
1.73 (43.9)
SPECIFICATIONS AND FEATURES
1.40
(35.5)
HXC2D-1TW
K
4
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as indicated in “Description”
• 2-Way Communication allows status of receivers
changed manually to be reflected in the controller
• Leviton's patented Intellisense™ Technology virtually eliminates signal problems due to line noise
• Uses existing 120V AC 60Hz wiring to send command signals
• Compatible with Decora screwless and standard
Decora wallplates
• Green LED illuminates to confirm ON command
sent or STATUS ON report received
• Decora styling coordinates with Leviton’s popular
Decora line; complements any interior
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
COLOR
All devices are shipped in White only. See chart for
compatible color change kits.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: A Cat. No. HCA02-10E System Amplifier
must be installed in all panels in every DHC
installation to ensure adequate signal strength.
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Controllers—Green Line
Wall Switch Controllers with 2-Way Communication U R
HXC3D-1TW
HXC4D-1TW
2.69 (68.2)
CAT. NO.
Three-Address Dimming Controller—Three sets of ON/OFF buttons transmit ON/OFF
commands to three sequential addresses in the same letter code group as this controller.
One set of DIM/BRIGHT buttons transmits DIM/BRIGHT commands to the most recently
selected address. Shipped in White—Color change kits available for other colors.
Four-Address Dimming Controller—Four sets of ON/OFF buttons transmit ON/OFF
commands to four sequential addresses in the same letter code group as this controller.
One set of DIM/BRIGHT buttons transmits DIM/BRIGHT commands to the most recently
selected. Shipped in White—Color change kits available for other colors.
Three-Address Dimming, ALL LIGHTS ON/ALL OFF Controller—Three sets of ON/OFF
buttons transmit ON/OFF commands to three sequential addresses in the same letter code
group as this controller. One set of DIM/BRIGHT buttons transmits DIM/BRIGHT commands to the most recently selected address. One set of ALL LIGHTS ON/ALL OFF buttons
transmits commands to all receivers set to the same letter code as this transmitter.
Receptacle receivers and Universal Low-Voltage Module (6337) will not respond to ALL ON
command. Shipped in White—Color change kits available for other colors.
Seven-Scene Dimming Controller—Each of seven SCENE buttons transmits ON commands
at preset levels to 12 sequential addresses in the same letter code as this controller. (Note:
12-address sequence continues at address 1 if address 16 is reached before all sequential
addresses are completed). May be used with all Leviton scene-capable receivers. One set of
SCENE DIM/SCENE BRIGHT buttons transmits SCENE DIM/BRIGHT commands to most
recently selected scene. One OFF button transmits OFF command to most recently selected
scene. Green LEDs illuminate to indicate ON command sent or SCENE ON command
detected. Shipped in White—Color change kits available for other colors.
The HCCS7-1TW utilizes extended code format. This command structure is compatible with
Cat. No. HCA02-10E DHC System Amplifier/Coupler /Repeater but is not compatible with the
older version of the System Amplifier Cat. No. 6201.
3.28 (83.3)
DESCRIPTION
4.40 (112.0)
1.76 (45.0)
HXC4A-1TW
HXC7S-1TW
1.40
(35.5)
HXC3D-1TW
2.69 (68.2)
3.28 (83.3)
No more than 4 Controllers should be installed on a single branch circuit.
Cat. No. White
Cat. No. Almond Cat. No. Gray
Cat. No. Black
DCK3D-00W
DCK3D-0CW
(w/printable
labels)
DCK4A-00W
DCK4A-0CW
(w/printable
labels)
DCK4D-00W
DCK4D-0CW
(w/printable
labels)
DCKS7-00W
DCKS7-0CW
(w/printable
labels)
DCK3D-00A
DCK3D-0CA
(w/printable
labels)
DCK4A-00A
DCK4A-0CA
(w/printable
labels)
DCK4D-00A
DCK4D-0CA
(w/printable
labels)
DCKS7-00A
DCKS7-0CA
(w/printable
labels)
—
—
—
—
—
—
—
—
—
—
—
DCKS7-00G
DCKS7-0CG
(w/printable
labels)
DCKS7-00E
DCKS7-0CE
(w/printable
labels)
SPECIFICATIONS AND FEATURES
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as
indicated in “Description”
• 2-Way Communication allows status of receivers
changed manually to be reflected in the controller
• Leviton’s patented Intellisense™ Technology virtually
eliminates signal problems due to line noise
• Uses existing 120V AC 60Hz wiring to send
command signals
• Compatible with Decora Plus screwless and
standard Decora wallplates
• Green LED illuminates to confirm ON command
sent or STATUS ON report received
• Decora styling coordinates with Leviton's popular
Decora line; complements any interior
• Backed by a Limited Two-Year Warranty
1.40
(35.5)
HXC4A-1TW
3.28 (83.3)
2.69 (68.2)
1.76 (45.0)
4.40 (112.0)
COLOR CHANGE KITS
Controller
Cat. No. Ivory
Cat. No.
HXC3D-1TW
DCK3D-00I
DCK3D-0CI
(w/printable
labels)
HXC4A-1TW
DCK4A-00I
DCK4A-0CI
(w/printable
labels)
HXC4D-1TW
DCK4D-00I
DCK4D-0CI
(w/printable
labels)
HXC7S-1TW
DCKS7-00I
DCKS7-0CI
(w/printable
labels)
Home Automation Products
4.40 (112.0)
1.76 (45.0)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
COLOR
1.40
(35.5)
All devices are shipped in White only. See chart for
compatible color change kits.
MATERIAL CHARACTERISTICS
HXC7S-1TW
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: A Cat. No. HCA02-10E System Amplifier
must be installed in all panels in every DHC
installation to ensure adequate signal strength.
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
5
DECORA HOME CONTROLS (DHC)
®
Residential Grade Controllers—Green Line
RF Components
Home Automation Products
HCCUR
DESCRIPTION
CAT. NO.
Universal Remote Control—Hand-held wireless remote control sends RF (radio frequency)
command signals to DHC Plug-In Transceiver Cat. No. HCPRF for up to 256 DHC
addresses. With an operating range of up to 50 ft. through wall and ceilings, it sends
ON/OFF, DIM/BRIGHT and ALL ON/ALL OFF commands for lighting and ON/OFF commands for appliances. The Universal Remote will also control audio and video equipment,
including TV’s, VCR’s, cable boxes, satellite receivers, DVD and CD players and more.
Functions as an all-in-one controller for lighting and audio/video systems, making it ideal
for home theaters. Universal design also makes it suitable for the elderly and physically
challenged. Dual built-in timers can shut off TV and/or DHC devices up to ninety minutes
after setting. Uses 2 AAA batteries. Must be used with HCPRF Transceiver. Color: Black.
Plug-In Transceiver—Accepts Radio Frequency DHC commands from the Universal
Remote Cat. No. HCCUR for ON/OFF, DIM/BRIGHT and ALL ON/ALL OFF, as well as
ON/OFF commands from the Key Chain Remote Cat. No. HCCKR. The Plug-In Transceiver
works with all DHC receivers by re-transmitting commands signals onto the home’s existing
electrical wiring. Plugs into any standard receptacle and provides a built-in outlet for
ON/OFF switching of incandescent lamps rated 300W max. @ 120V AC. The lamp can be
controlled remotely or locally via the programming button on the face of the Transceiver,
which can also be used to change the unit's DHC address. Features Intellisense™
Technology to ensure optimum system performance. 2-Way communication permits local
status of attached lamp to show on all 2-Way capable DHC controllers. Multiple HCPRF
Transceivers can be used to increase coverage in large homes. Unit will re-transmit commands for up 256 DHC addresses. Color: White.
Key Chain Remote Controller—Designed to fit on a key chain and send RF (radio frequency) command signals to DHC Plug-In Transceiver Cat. No. HCPRF. With an operating
range of up to 50 ft. through wall and ceilings, it sends ON/OFF commands for any 2
sequential DHC addresses (addresses are user programmable). Ideal for control of home
lighting from a vehicle when entering garage or driveway. Uses long-life 3V CR2032 lithium
battery (included). Must be used with HCPRF Transceiver. Color: Black.
HCCUR
SPECIFICATIONS AND FEATURES
6
HCCKR-E
HCCKR-E
• Leviton's Universal Remote Control works with
DHC-controlled lighting and appliances as well as
audio/video system components
• Ultra-compact Key Chain Remote adds to home
security by allowing users to turn ON lighting as
they approach entranceway, garage or driveway
• Plug-In Transceiver features Intellisense™
Technology for optimum reliability, 2-way signaling
capability, and easy one-button programming.
Must be used with Universal Remote and Key
Chain Remote.
• Backed by a Limited Two-Year Warranty
K
HCPRF-1TW
TESTING AND CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File #LR-69519)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: Cat. No. HCCUR is CSA Certified only.
Cat. No. HCPRF-1TW is UL Listed, CSA Certified
and NOM Certified. UL and CSA not required for
Cat. No. HCCKR-E
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Controllers—Red Line
Programmer/Controller Products U R
5.51 (140.0)
CAT. NO.
6312
6320
6315
6316
0.95
(24.1)
6312
1.64
(41.7)
CSA Certified except where indicated by#
4.45
(113.0)
5.87 (148.1)
6320
No more than 4 Controllers should be installed on a single branch circuit.
2.75 (69.9)
3.28 (83.3)
4.06 (103.1)
1.75 (44.5)
Home Automation Products
Basic Wall Mounted Programmer—A powerful home automation controller that is easy to
install and use. Compact, low-profile unit fits in single-gang wallbox. Accepts up to four
addresses; maximum two ON and two OFF commands per address. SECURITY mode randomly selects ON and OFF times to make an empty home appear occupied. ALL LIGHTS
ON switch acts as a panic-button lighting system, switching on all DHC switch modules with
one touch. DIM/BRIGHTEN command can automatically adjust lighting levels of all fixtures
controlled by DHC dimming receivers. LED readout shows time and program status; battery
back-up protects clock setting and program status for ten hours during power interruption.
Available in Ivory, White, and Almond.
Table Top Controller#—Provides manual remote control for all 256 DHC addresses. Command
functions include ON/OFF, ALL LIGHTS ON/ALL OFF and DIM/BRIGHTEN. The 6320 plugs
into any 120 volt AC receptacle to transmit command signals over existing AC wiring.
Dry Contact Controllers#—Allow monitoring of up to four dry contact closures. No. 6315
Maintained Contact Transmitter sends ON or OFF command signals in response to contact
opening or closure. No. 6316 Momentary Contact Transmitter sends ON or OFF command
signals in response to contact closure, and no command signal upon contact openings.
These units can be used with photocells, infrared sensors, security system, motion sensors,
and any other dry-contact-based sensors. Installs in a single-gang wallbox. Color: Ivory.
Power to control side: 125V 60Hz AC Only.
LV LEAD COLOR
TRANSMITS TO
Blue
A1*
Orange
A2*
Yellow
A3*
Brown
A4*
*Or any four sequential address codes within the same Letter Code group
as the Transmitter.
4.52 (114.9)
DESCRIPTION
1.44
(36.6)
6315
SPECIFICATIONS AND FEATURES
• Programmer adds user-devised scheduling to DHC
automated control of lights and appliances for
greater convenience, energy savings and security
• Programmer and Controllers send DHC switching
commands over existing 60Hz 120V AC house
wiring.
• Dry Contact Transmitters link signaling from
photocells, infrared sensors, security systems,
motion sensors, and other dry contact transmitters
to DHC controlled devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
COLOR
Colors available as indicated. Cat. No. 6312 available
in Ivory (-I), White (-W) and Almond (-A).
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Note: A Cat. No. HCA02-10E System Amplifier must
be installed in all panels in every DHC installation
to ensure adequate signal strength.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
K
7
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Green Line
Scene-Capable Wall Dimmers and Switches U R
2.66 (67.6)
3.28 (83.3)
4.13 (104.9)
1.73 (43.9)
2.38 (60.5)
1.39
(35.3)
HXM06-1TW
2.66 (67.6)
4.13 (104.9)
3.28 (83.3)
DESCRIPTION
CAT. NO.
RATING @ 120V 60Hz
COLOR
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED brightness display. 3-Way capable when
used with MS00R-10 Multi-Remote
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED brightness display. 3-Way capable when
used with MS00R-10 Multi-Remote
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED brightness
display. Neutral connection required
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED brightness
display. Neutral connection required
8 Amp Scene-Capable Electronic Switch Receiver
(non-dimming) with One-Button Programming
and 2-Way Communication. Neutral connection
required
HCM06-1DW
Incandescent 600W,
(450W) Magnetic
Low-Voltage Lighting
600VA
1000W Incandescent,
1000VA (750W) Magnetic
Low-Voltage Lighting
White
(Ivory kit
included)
HXM06-1TW
600W Incandescent,
600VA (450W) Magnetic
Low-Voltage Lighting
White
(Ivory kit
included)
HXM10-1TW
1000W, 120V AC 60Hz
Incandescent,
1000VA (750W) Magnetic
Low-Voltage Lighting
8 Amp, 1000W Incandescent,
1000VA (750W)
Fluorescent & Magnetic
Low-Voltage Lighting
White
(Ivory kit
included)
HCM10-1DW
HXS08-1TW
White
(Ivory kit
included)
Use Leviton Power Extenders to extend the load capacity of DHC Dimming Wall Switch Receivers.
2.38 (60.5)
1.39
(35.3)
HXS08-1TW
COLOR CHANGE KITS FOR WALL DIMMERS AND SWITCHES
Receiver
Cat. No. Ivory
Cat. No. White
Cat. No. Almond
Cat. No.
HCM06/10-1DW DRKDD-1LI
DRKDD-1LW
DRKDD-1LA
HXM06/10-1TW DRKDD-1LI
DRKDD-1LW
DRKDD-1LA
HXS08-1TW
DRK0D-1LI
DRK0D-1LW
DRK0D-1LA
2.66 (67.6)
4.13 (104.9)
1.73 (43.9)
2.38 (60.5)
1.39
(35.3)
HCM06-1DW
Note: A Cat. No. HCA02-10E System Amplifier must
be installed in all panels in every DHC installation
to ensure adequate signal strength.
SPECIFICATIONS AND FEATURES
• New One Button Programming
• Provide Scene Control capability when used with
DHC Scene Controller HXCS7-1TW and HCCPG-1TW
Toscana Programmer. Also backward compatible with
16400/16450-S and 16400/16450-SD Scene
Controllers
• HCM06/10-1DW provides 3-way and multi-location
capability when used with MS00R-10 Multi-Remote
• Soft On/Fade Off brightness levels extend bulb life
• Fits in standard wall boxes
• Leviton’s patented Intellisense™ Technology virtually
eliminates signal problems due to line noise
• Protected memory during minor power fluctuations
• LED brightness display alongside rocker
• Packed with Ivory and White snap-on rocker/frame
kit; optional snap-on rocker/frame color change kits
sold separately. See color change kit chart
Cat. No. Gray
Cat. No. Black
DRKDD-1LG
DRKDD-1LG
DRK0D-1LG
DRKDD-1LE
DRKDD-1LE
DRK0D-1LE
• Decora-styled to coordinate with Leviton’s Decora line
of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed to File No. E31373
• CSA Certified to File No. LR3413
• NOM Certified #057
COLOR
Colors available as indicated. See chart for Rocker
and Frame Kits (must be purchased separately)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
K
8
White
(Ivory kit
included)
Special Note: As with any dimmer, derating for multiple gang installations is required for Wall Switch Receivers.
3.28 (83.3)
Home Automation Products
1.73 (43.9)
The new DHC Scene-Capable Receivers provide one-button programming for scene and address capturing. All feature Leviton’s exclusive Intellisense® to ensure top performance and reliability even when noise
is present on the AC powerline.
Dimming Wall Switch Receivers provide manual and remote ON/OFF switching and full-range dimming for
incandescent and magnetic low-voltage lighting loads. The new HXS08-1TW Electronic Switch Receiver
(non-dimming) provides manual and remote ON/OFF switching for incandescent, magnetic low-voltage,
fluorescent and compact fluorescent lighting. All Switch Receivers come with a locator LED. Dimming
models feature an LED brightness level display and a preset feature that turns lights ON at the last selected
brightness level. Double Tap feature immediately adjusts light to full brightness without affecting the last
selected brightness level. All -T Receivers allow 2-way status tracking with the DHC Toscana™ Deluxe
Programmer and new 2-way capable controllers when receivers are changed locally.
Typical applications include home theaters, dining rooms, chandeliers, living rooms with multiple highhats, entranceways, and a wide range of mood lighting applications.
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Green Line
Scene-Capable Wall Dimmers U R
DESCRIPTION
CAT. NO.
RATING
COLOR
600W Incandescent,
600VA (450W)
Magnetic Low-Voltage
120V AC 60Hz
1000W Incandescent,
1000VA (750W)
Magnetic Low-Voltage
120V AC 60Hz
1200W Incandescent,
1200VA Fluorescent and
Magnetic Low-Voltage Lighting
10A-120V AC 60Hz
White
(Ivory kit
included)
White
(Ivory kit
included)
2.66 (67.6)
2.38 (60.5)
1.39
(35.3)
HCM06-1SW
White
(Ivory kit
included)
1.73 (43.9)
Cat. No. Almond
Cat. No. Gray
Cat. No. Black
DRK0D-1LI
DRK0D-1LW
DRK0D-1LA
DRK0D-1LG
DRK0D-1LE
ROCKER AND FRAME KITS FOR HCS10-1SW
Cat. No. Ivory
Cat. No. White
Cat. No. Almond
Cat. No. Gray
Cat. No. Black
DRK0S-0LI
DRK0S-0LW
DRK0S-0LA
DRK0S-0LG
DRK0S-0LE
2.66 (67.6)
Cat. No. White
3.28 (83.3)
Cat. No. Ivory
4.13 (104.9)
ROCKER AND FRAME KITS FOR HCM10-1SW AND HCM06-1SW
2.38 (60.5)
HCS10-1SW
SPECIFICATIONS AND FEATURES
• Provide Scene Control capability when used with
DHC Scene Controller HXCS7-1TW and HCCPG-1TW
Toscana Programmer. Also backward compatible with
16400/16450-S and 16400/16450-SD Scene
Controllers
• Provides 3-way and multi-location capability when
used with MS00R-10 Multi-Remote
• Soft On/Fade Off brightness levels allowing extended
bulb life
• Fits in standard wall boxes
• Leviton’s patented Intellisense™ Technology virtually
eliminates signal problems due to line noise
• Protected memory during minor power fluctuations
• Packed with Ivory and White snap-on rocker/frame
kit; optional snap-on rocker/frame color change kits
sold separately. See color change kit chart
• Decora-styled to coordinate with Leviton’s Decora line
of wiring devices
• Backed by a Limited Two-Year Warranty
1.39
(35.3)
Home Automation Products
600 Watt Scene-Capable Dimming Switch—
HCM06-1SW
Single-pole and 3-way (multi-location) when used
with MS00R Multi-Remote. Neutral not required
for incandescent loads.
1000 Watt Scene-Capable Dimming Switch—
HCM10-1SW
Single-pole and 3-way (multi-location) when used
with MS00R Multi-Remote. Neutral not required for
incandescent loads.
10 Amp Scene-Capable Switch (Non-Dimming)—
HCS10-1SW
Single-pole and 3-way (multi-location) when used
with MS00R Multi-Remote. Neutral required.
Requires Cat. No. 6287 when used with electronic
loads such as compact fluorescent lamps.
3.28 (83.3)
Dimming Wall Switch Receivers provide manual and remote ON/OFF switching and full range dimming for
incandescent and magnetic low-voltage loads. Receivers are scene-capable when used with Leviton’s
Toscana Programmer HCCPG-1TW and Seven-Scene Controller HXC7S. Receivers will respond to ON,
OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF AND SCENE commands. Receivers also provide single-pole
and 3-way (multi-location) ON/OFF switching and full range dimming when used with MS00R-10 MultiRemote. Preset feature turns lights ON at last selected brightness level. Soft ON/Fade OFF feature provides
eye-pleasing effect and extended bulb life. Cat. No. HCS10-1SW is a non-dimming ON/OFF Receiver. All
receivers feature Intellisense™ Technology to ensure top performance and reliability even when noise is
present on the AC powerline.
Packed with Ivory and White Rocker and Frame Kits. Kits for other colors must be purchased separately.
4.13 (104.9)
1.73 (43.9)
TESTING AND CODE COMPLIANCE
• UL Listed to File No. E31373
• CSA Certified to File No. LR3413
• NOM Certified #057
COLOR
Colors available as indicated. See chart for Rocker
and Frame Kits (must be purchased separately)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
9
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Green Line
2.39 (60.6)
Scene-Capable Plug-In Receiver Modules
2.97 (75.3)
UR
1.56
(39.5)
2.13
(53.9)
HXP15-1TW
2.97 (75.3)
Home Automation Products
1.95 (49.7)
2.12
(54.0)
DESCRIPTION
CAT. NO.
Scene-Capable Plug-In Appliance Module with One-Button Programming and 2-Way
Communication—Provides 1-button programming through address capturing. No wiring
necessary; plugs into any 15A-125V grounding receptacle and provides NEMA 5-15R
grounding receptacle for lights and appliances. Provides manual and remote ON/OFF
switching for a variety of fee-standing lights and appliances. Provides scene capability
(ON/OFF switching) when used with the HXCS7-1TW Seven-Scene Controller and the
HCCPG-1TW Toscana Deluxe Programmer. Responds to ON, OFF, ALL LIGHTS ON/ALL
OFF and SCENE COMMANDS. Push button allows manual ON/OFF control. Provides
status tracking to notify 2-way capable controllers of manual status changes. Features
Intellisense™ Technology for the utmost in reliability even when noise exists on the AC
powerline. With LED locator light. Color: White.
Rated: 120V AC 60 Hz, 1800W Incandescent, 1800VA Fluorescent, 15A Resistive,
1/2 HP Motor loads @ 120V AC
Scene-Capable Plug-In Lamp Module with One-Button Programming—Provides 1-button programming through address capturing. Provides remote ON/OFF switching, manual ON
switching, and remote full-range dimming for plug-in incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet. Allows local control of any lamp plugged into it.
Available in White (-W) only. Provides Scene Control capability when used with DHC Scene
Controller HXCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene Controllers.
Equipped with Leviton’s Intellisense® advanced circuitry for the utmost in reliability, even
where electrical “noise” exists on the power line. Responds to ON, OFF, DIM, BRIGHT, ALL
LIGHTS ON/ALL OFF and SCENE LIGHTING commands.
Rated: 120V 60Hz, 300W Incandescent
HXP15-1TW
1.15
(29.2)
HCP03-10W
SPECIFICATIONS AND FEATURES
K
10
HCP03-10W
• Plug-in design requires no wiring
• HXP15-1TW provides manual and remote ON/OFF
switching of plug-in lamps and appliances
• HCP03-10W provides manual and remote ON/OFF
switching and full-range dimming for plug-in
incandescent lamps
• One-button programming through address capturing
• Scene-capable when used with when used with the
HXCS7-1TW Seven-Scene Controller and the
HCCPG-1TW Toscana Deluxe Programmer.
• Protected memory maintains status of plug-in loads
and address programming during minor power
fluctuations
• HXP15-1TW provides status tracking to notify 2-way
capable controllers of manual status changes
• Leviton's patented Intellisense™ Technology virtually
eliminates signal problems due to line noise
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Red Line
Wall Switch Receivers U R
1.42 (38.6)
CAT. NO.
6291-WI
2.70 (68.6)
3.28 (83.3)
Single-Pole (One Location) Switch—Equipped with Intellisense (gated automatic gain control)
and provides manual and remote ON/OFF control. Can be set to any of 256 DHC address
codes to switch incandescent, inductive or resistive loads where dimming is not required.
Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands. Wires easily into standard wall
box using terminal screws. Neutral Connection Required. Pilot light is ON when switch is ON.
Code wheels are located beneath rocker plate. Packed with Ivory and White Rocker and
Frame. Kits for other colors must be purchased separately (See Chart). Requires Cat. No.
6287 when used with electronic loads such as compact fluorescent lamps.
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
3-Way (Multi-Location) Switch—Equipped with Intellisense (gated automatic gain control).
Provides manual and remote ON/OFF control in multi-station switching circuits when used
in conjunction with one or more Cat. No. 6294 Remote Switches. The 6293 can be set to
any of 256 DHC address codes to switch incandescent, inductive or resistive loads where
dimming is not required. Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands.
Wires easily into standard wall box using terminal screws. Neutral Connection Required.
Pilot light is ON when switch is ON. Code wheels are located beneath rocker plate. For
proper operation, the total length of traveler wire between Multi-Location Switch and
Remote should not exceed 90 feet. Packed with Ivory and White Rocker and Frame.
Kits for other colors must be purchased separately (See Chart).
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
4.06 (103.1)
DESCRIPTION
6293-WI
1.53
(38.9)
6293-WI
Home Automation Products
ROCKER AND FRAME KITS FOR 6383 SWITCH
Cat. No. Ivory
Cat. No. White
6081-I
6081-W
ROCKER AND FRAME KITS FOR 6291 AND 6293 SWITCH
Cat. No. Ivory
6091-I
SPECIFICATIONS AND FEATURES
• Fit in standard wallboxes and replace regular
switches to provide manual and remote ON/OFF
switching of lighting and appliances. 6381-WI
dimming switch rated for incandescent lighting only
• Leviton’s patented Intellisense™ Technology virtually
eliminates signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to add
multi-location switching without resorting to complicated and costly conventional wiring means
• Decora styled to coordinate with Leviton’s Decora
line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
11
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Red Line
Wall Switch Remotes and Receivers U R
2.75 (69.9)
3.28 (83.3)
4.09 (103.9)
1.70 (43.2)
1.40
(35.6)
DESCRIPTION
CAT. NO.
3-Way and 4-Way (Multi-Location) Remote Switch—For use with DHC Cat. Nos. 6383 and
6293 Multi-Location Switches as a remote switch. The 6294 provides 3-Way, 4-Way and
higher-level control in conjunction with these units. It cannot be used for any other purpose in
the DHC network. The unit wires easily into standard wall box using terminal screws. For
proper operation, the total length of traveler wire between Multi-Location Switch and Remote
should not exceed 90 feet. Available in Ivory (-I), White (-W) and Almond (-A). Specify
color(s) when ordering, as snap-on cover and frame kits cannot be used with the 6294.
No Load Rating—For use with 6293 and 6383 units only
Double Pole Wall Switch—Equipped with Intellisense (gated automatic gain control). Provides
local and remote ON/OFF control. Responds to ON/OFF and ALL OFF commands from controllers. Can be set to any of the 256 DHC address codes. Intended for control of pool pumps,
air conditioning units, spa heaters and pumps, and other large residential loads. Wire easily
into any standard wall box by means of six-inch leads. Available in Ivory only.
Rated: 20A 2 HP 250V AC 60Hz
6294
6371-I
Home Automation Products
6371-I
ROCKER AND FRAME KITS FOR MS00R-10 REMOTE SWITCH
Cat. No. Ivory
Cat. No. White
Cat. No. Almond
Cat. No. Gray
Cat. No. Black
DRK0R-00I
DRK0R-00W
DRK0R-00A
DRK0R-00G
DRK0R-00E
SPECIFICATIONS AND FEATURES
• Remote Units add multi-location capability to
dimmer and switch receivers
• Fit in standard wallboxes to replace regular
switches
• Leviton's patented Intellisense™ Technology
virtually eliminates signal problems due to line
noise (Cat. No. 6371-I)
• 6371-I Heavy-duty appliance switch available for
automated control of heavy-duty loads such as air
conditioning and pool pumps
• Decora styled to coordinate with Leviton’s Decora
line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
COLOR
Colors available as indicated.
HORSEPOWER
Cat. No 6371-I: 2 HP @ 250V 20A
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°FMATERIAL
CHARACTERISTICS
K
12
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Red Line
RECEPTACLE Receivers U R
6227-I
6227-W
6227-A
G
NEMA 5-15R
W
2.75 (69.9)
CAT. NO.
Split Duplex Wall Receptacle—Equipped with Intellisense (gated automatic gain control).
Top outlet provides remote ON/OFF load control in response to controller command signals. Bottom outlet is continuously live. Local control of any light or appliance plugged into
the controlled outlet can be achieved by switching the load ON/OFF switch once or twice.
Will not respond to ALL LIGHTS ON command. Fits standard wall boxes and supplied with
leads for easy installation.
Rated: 15A 120V 60Hz AC only. NEMA 5-15R .
Duplex Wall Receptacle—Equipped with Intellisense (gated automatic gain
control). Same as 6227, but with both top and bottom outlets providing
ON/OFF control in response to controller command signals. Feed-through load
lead allows control of receptacles downstream. Will not respond to ALL LIGHTS
ON command. No local control available.
Rated: 15A 120V 60Hz AC only. NEMA 5-15R
Single Wall Receptacle#—Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL
LIGHTS ON command.
Rated: 20A 120V 60Hz AC only. NEMA 5-20R
Single Wall Receptacle#—Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL
LIGHTS ON command.
Rated: 20A 250V 60Hz AC only. NEMA 6-20R
3.28 (83.3)
DESCRIPTION
4.09 (103.9)
1.70 (43.2)
6280-W
G
NEMA 5-15R
W
1.40
(35.6)
6296-I
6296-W
NEMA 5-20R
6227-I
1.70 (43.2)
G
W
6298-W
2.75 (69.9)
3.28 (83.3)
4.09 (103.9)
CSA Certified except where indicated by#
1.40
(35.6)
6280-W
2.75 (69.9)
3.28 (83.3)
4.09 (103.9)
1.70 (43.2)
Home Automation Products
G
NEMA 6-20R
1.40
(35.6)
6296-W
1.70 (43.2)
2.75 (69.9)
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
• NOM Certified (#057)
COLOR
Colors available as indicated in Ivory (-I), White (-W)
and Almond (-A).
MATERIAL CHARACTERISTICS
3.28 (83.3)
• Available in commonly used NEMA configurations
• Fit in standard wallboxes and replace standard
receptacles
• Leviton's patented Intellisense™ Technology virtually eliminates signal problems due to line noise
• Decora styled to coordinate with Leviton’s Decora
line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
4.09 (103.9)
SPECIFICATIONS AND FEATURES
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°FMATERIAL
CHARACTERISTICS
1.40
(35.6)
6298-I
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
K
13
DECORA HOME CONTROLS (DHC)
®
Residential Grade Receivers—Red Line
Receiver Modules U R
3.57 (90.7)
2.20 (55.9)
6337
1.55
(39.5)
CAT. NO.
Universal Low Voltage Module—Almost any device operated at low voltages can now be
automated using the 6337. This receiver interfaces between the low voltage device and the
120V AC wiring network. It receives an ON or OFF command from DHC Transmitters and
can operate sprinkler systems, designated lighting, skylight closures, heating systems,
garage door openers and other lighting and motor loads. Simply connect LV wiring to the
screw terminal on the module and plug it into any 120V wall outlet.
In addition to switching contacts, the 6337 has a built-in alarm that can be set to sound
whenever the switch contacts are closed. The 6337 can be set to operate the relay only,
the alarm only, or both the relay and the alarm.
The 6337 can also be set for momentary operation so that the relay and/or the alarm will
be turned on for approximately two seconds in response to any ON command. Does not
respond to ALL LIGHTS ON or DIM/BRIGHT commands.
Rated: 120V 60Hz AC only.
Contacts: 5A 12V DC,
100VA 30V DC Inductive
Fixture Relay Module—Can be mounted at either an incandescent or fluorescent fixture by
means of adhesive strips. Responds to ON/OFF and ALL LIGHTS ON/ALL OFF commands
from controllers. Equipped with leads for easy installation.
Rated: 15A 120V 60Hz AC only, incandescent, inductive, or resistive.
Dimming Fixture Module—Can be mounted at an incandescent fixture by means of
adhesive strips. Responds to ON/OFF, DIM/BRIGHTEN and ALL LIGHTS ON/ALL OFF
commands from controllers. Equipped with leads for easy installation.
Rated: 300W incandescent 120V 60Hz AC only.
6337
6376
Use Leviton Power Extenders to extend the load capacity of DHC Dimming Wall Switch Receivers.
1.30
(33.0)
6375
SPECIFICATIONS AND FEATURES
• Universal Low Voltage Module can automate
devices operated at low voltages such as sprinklers, skylights, and heating/AC systems
• Fixture modules provide direct control for fixtures
where only remote control is necessary
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°FMATERIAL
CHARACTERISTICS
K
14
6375
See Lighting Controls Section C for more information on Leviton Power Extenders.
2.95 (74.9)
Home Automation Products
2.10 (93.3)
DESCRIPTION
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Network Integrity Products
DHC Network Integrity Products U R
Panel Mounted Surge Protective Devices (SPD)—Provides homes with protection from high-energy transient
voltage surges that can damage sensitive electronic circuits in computers, audio and video components and
electronic appliances. DHC components incorporate micro circuitry and Leviton highly recommends protecting the DHC network from powerline surges. Leviton Panel Mount devices feature unique hybrid suppression
circuitry for outstanding surge protection. The following devices are compatible with all DHC components.
DESCRIPTION
CAT. NO.
51120-1
MAX. SURGE CURRENT
(8 X 20µs wave) L-N
50kA
UL 1449
RATING L-N
500V
120/240V AC, Single-Phase—Standard J-box metal
enclosure with pre-punched standard knockouts.
120/208V AC, 3-Phase WYE—Standard J-box metal
enclosure with pre-punched standard knockouts.
120/240V AC, Single-Phase—NEMA 3R enclosure
suitable for outdoor use
120/240V AC, Single-Phase—Features sine wave
tracking, redundant protection and replaceable/surge
modules. NEMA 12 enclosure with hinged cover.
120/240V AC, Single-Phase Multimedia Panel—
Provides surge protection for AC powerline, 2-pairs
of phone/fax/modem connections, and dual
CATV/Satellite feeds using F connectors. Painted
steel NEMA 1 enclosure with four perforated
7/8" knockouts.
51120-3
50kA
500V
51120-3R
50kA
800V
52120-M2H 100kA
400V
51110-PTC AC: 48kA
Tel: 1.9kA @ 3.8kV
CATV: 2kA
AC: 400V
Tel: 220V
CATV: 25V
51110-PTC
8.13 (206.5)
2.2
(56.4)
3.50 (88.9)
6.50 (165.1)
5.50 (139.7)
4.75 (120.7)
51120-1
Top View
Multimedia Panel Surge Protective Device
Cat. No. 51110-PTC
Home Automation Products
Note: A Panel Mount Surge Protective Device should be installed at the service panel in every DHC installation.
7.00 (177.8)
6.00 (152.4)
4.06 (103.1
6.00 REF. (152.4)
6.00 (152.4)
7.00 (177.8)
SPECIFICATIONS AND FEATURES
• Real-time diagnostic visual indicator shows power
and suppression status for each \protected phase
• Cat. No. 51110-PTC Multimedia Panel protects
AC, phone/fax/modem, and CATV/Satellite lines
from transient voltage surges
• Cat. No. 52120-M2H features user-replaceable
surge modules
• Backed by a Limited 10-Year Warranty
TESTING AND CODE COMPLIANCE
• Listed to UL 1449 (2nd edition) Standards
• UL Listed (File #E-146315)
• CSA Certified (File #LR94773)
PANEL MOUNTED SURGE PROTECTIVE DEVICE
Cat. No.51120-1,-3
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: -10°C to 60°CMATERIAL
CHARACTERISTICS
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
15
DECORA HOME CONTROLS (DHC)
®
Residential Grade Network Integrity Products
DHC Network Integrity Products U R
4.77 (121.2)
3.08 (78.1)
1.64
(41.7)
2.69 (68.4)
4.12 (104.7)
Home Automation Products
HCA02-10E
1.73 (43.9)
DESCRIPTION
CAT. NO.
System Amplifier/Coupler/Repeater with Built-in Test Signal Generator—Performs a variety of
functions to ensure outstanding DHC system performance and reliability. Couples transmitter (programmer and controller) signals generated on the 120V leg where the transmitter
draws power onto the other leg in a 120/240V single-phase 3-wire residential wiring system. The HCA02-10E also amplifies and repeats command signals to maintain proper signal strength through the DHC system. Green pilot light indicates unit has power. Lamp will
indicate when signal is being transmitted. Features Intellisense™ Technology to help
ensure top performance even when noise is present on the AC powerline. The error lamp
indicates the Intellisense feature is activated. The unit provides convenient test signal
transmission for easy signal strength verification at individual DHC module locations using
Leviton’s Cat. No. 6386 Signal Strength Indicator.
The HCA02-10E should be installed at the main panel on its own dedicated 15A breaker in
accordance with NEC requirements. The HCA02-10E cannot be used in a 3-phase system.
HCA02-10E
Note: A Cat. No. HCA02-10E System Amplifier must be installed in all panels in every DHC installation
to ensure adequate signal strength.
Signal Bridge/Passive System Coupler—Couples the DHC command signal onto the 120V
legs of the power system to ensure sufficient command signal strength throughout the
DHC network. (NOTE: 6299 should NOT be installed in the same panel as HCA02-10E).
Rated: 120/240V 60Hz AC only.
Signal Attenuator, 2-Phase—Attenuates “(knocks down”) external noise and signal levels
entering the DHC network. The 6285 can be used to block interference from appliances,
electronic ballasts and home electronics to ensure top performance from DHC network.
Also used to block signal leakage (attenuation) caused by capacitive filters and electronic
power supplies.
Rated: 2-Phase 120/240V & 120/208V 60Hz AC only.
Multi-Phase Blocking Coupler—The 6284 is installed between the incoming electrical service
and the service panel in apartment buildings, condominiums, attached-unit dwellings and
homes sharing the same side of the electrical transformer. Keeps extraneous electronic noise
and signals from entering or leaving the DHC network.
Rated: 120V, 120/240V & 120/208V 60Hz AC—Max. 200 Amp panel.
6285
6284
1.38
(35.2)
6299
SPECIFICATIONS AND FEATURES
• Cat. No. HCA02-10E System Amplifier/
Coupler/Repeater must be installed in all DHC
installations to ensure adequate signal strength.
• Cat. Nos. 6284 and 6285 are used to stop extraneous noise and signals from degrading DHC network
operation
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR3413)
• UL 244A Tested (and others where applicable)
MATERIAL CHARACTERISTICS
Engineering Thermoplasti UL-94, V2 Rating
Operating Temperature: 32°F to 130°FMATERIAL
CHARACTERISTICS
K
16
6299
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
DECORA HOME CONTROLS (DHC)
®
Residential Grade Network Integrity Products
DHC Network Integrity Products U R
DESCRIPTION
CAT. NO.
Noise Block—The 6287 is designed for use with DHC switch modules that include a
means for connection to neutral. This device may be wired on the LOAD side of a DHC
switch module (except 6383), or on the LINE side of any fixture using an electronic ballast,
a low-voltage ballast, or any noise-generating source that does not require more than 5A
120V AC. The 6287 prevents interference generated by fixture components from interfering with DHC signals.
Rated: 5A 120V 60Hz AC only.
Plug-in Noise Filter—electrical appliances may generate “noise” that could interfere with
proper signal transmission. When the offending appliance is isolated and plugged into the
6288 Noise Filter, which is in turn plugged into a receptacle, stray noise is filtered out,
ensuring a clear signal. Color: Brown.
Rated: 5A 120V 60Hz AC only.
In-Line Noise Reducer—the 6289 Noise Reducer filters electrical “noise” and signals with
frequencies above and below the 121 kHz signal. The 6289 may be installed at the “noise”
or signal source or at the module affected by the interference. Depending on the source of
the interference, the 6289 may be wired phase to neutral or phase to phase.
6287
6288
6287
6386
2.92 (74.2)
6289
DHC Powerline Carrier Test Equipment U R
Signal Strength Indicator—Measures command signal strength at individual module locations. Minimum signal strength required for proper DHC Powerline Carrier component
operation is 100mV.
1.58 (40.1)
1.85 (47.0)
2.60 (66.0)
1.43
(36.2)
Ø1.17 (29.7)
Home Automation Products
6288
6289
SPECIFICATIONS AND FEATURES
• These devices are designed to eliminate interference from appliances, electronic ballasts and
home electronics in order to insure top performance from DHC systems
• Backed by a Limited Two-Year Warranty
Signal Strength Indicator
• Signal strength testing equipment used to ensure
proper operation of DHC system
• Backed by a Limited Two-Year Warranty
TESTING AND CODE COMPLIANCE
• NOM Certified (#057)
• UL Listed (E-66800)
Signal Strength Indicator
• UL Listed (File #E-66800)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 32°F to 130°FMATERIAL
CHARACTERISTICS
6386
K
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
17
HOW TO USE THIS CATALOG
The L-101 Leviton Wiring Device Catalog is designed to help you find the device you’re seeking in the quickest and easiest way
possible. Most product sections are divided into three distinct categories in the following sequence—Industrial Grade, Commercial
Grade and Residential Grade—and grouped according to amperage and voltage, lowest to highest. For example, if you need to
order 15 Amp, 125 Volt Industrial Grade straight-blade duplex receptacles, begin your search with the main Table of Contents at the
front of the book. Here you’ll see that all straight blade receptacles are listed in Section G. Turn to Section G for a more detailed Table
of Contents on the first page. Each section page contains product descriptions, ratings and catalog numbers. There are also helpful
highlights including Specifications and Features, Testing and Code Compliance, Color listing, Material Characteristics and dimensioned color product photos. Any product page in the L-101 Catalog can be clearly copied or faxed to customers and prospects for
use as a specifier sheet or as part of a presentation.
The Quick Reference Guide follows the main Table of Contents to help you pinpoint and locate specific products. Technical
Section V provides general product and test data, industry standards, NEMA configuration charts, a glossary of wiring device
terms, ANSI architectural symbols and other related information. Specific catalog numbers are listed in the exhaustive index at
the back of the catalog.
A
B
D
C
G
E
F
H
I
K
L
J
K
18
A RATING
E CATALOG NUMBER
I SPECIFICATIONS & FEATURES
B Choose GRADE, if appropriate
F DESCRIPTION
J TESTING AND CODE COMPLIANCE
C DIMENSIONED PHOTOGRAPH
G Check for NEMA CONFIGURATION
K COLOR LISTING
D WIRING/CERTIFICATIONS
H WALLPLATE REFERENCE, if appropriate
L MATERIAL CHARACTERISTICS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement