2006 owner`s manual
2006 Element
Owner’s Manual
(Unlinked)
This document does not contain hyperlinks and may be formatted for printing instead of web use. This is
due to changes in content and specifications of the vehicle that happen throughout the model year. This
manual will be replaced with a hyperlinked version at the end of the model year.
P/N 31SCV630
© 2006 Honda Motor Co., Ltd.
05/09/13 19:40:14 31SCV630 0001 Owner’s Identification
This owner’s manual should be
considered a permanent part of the
vehicle and should remain with the
vehicle when it is sold.
OWNER
ADDRESS
STREET
CITY
STATE/PROVINCE
ZIP CODE/
POSTAL CODE
This owner’s manual covers all
models of the Element. You may find
descriptions of equipment and
features that are not on your
particular model.
V. I. N.
DELIVERY DATE
(Date sold to original retail purchaser)
DEALER NAME
DEALER NO.
ADDRESS
STREET
CITY
OWNER’S SIGNATURE
DEALER’S SIGNATURE
STATE/PROVINCE
ZIP CODE/
POSTAL CODE
The information and specifications
included in this publication were in
effect at the time of approval for
printing. Honda Motor Co., Ltd.
reserves the right, however, to
discontinue or change specifications
or design at any time without notice
and without incurring any obligation
whatsoever.
05/09/13 19:40:21 31SCV630 0002 Introduction
Congratulations! Your selection of a 2006 Honda Element was a wise
investment. It will give you years of driving pleasure.
One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this owner’s manual in your vehicle so
you can refer to it at any time.
As you read this manual, you will
find information that is preceded by
a
symbol. This
information is intended to help you
avoid damage to your vehicle, other
property, or the environment.
California Proposition 65 Warning
Several warranties protect your new vehicle. Read the warranty booklet
thoroughly so you understand the coverages and are aware of your rights
and responsibilities.
Maintaining your vehicle according to the schedules given in this manual
helps to keep your driving trouble-free while it preserves your investment.
When your vehicle needs maintenance, keep in mind that your dealer’s staff
is specially trained in servicing the many systems unique to your vehicle.
Your dealer is dedicated to your satisfaction and will be pleased to answer
any questions and concerns.
WARNING: This product contains
or emits chemicals known to the
state of California to cause cancer
and birth defects or other
reproductive harm.
Event Data Recorders
This vehicle is equipped with one or
more recording devices commonly
referred to as event data recorders
or sensing and diagnostic modules.
i
05/09/13 19:40:30 31SCV630 0003 A Few Words About Safety
Your safety, and the safety of others,
is very important. And operating this
vehicle safely is an important
responsibility.
To help you make informed
decisions about safety, we have
provided operating procedures and
other information on labels and in
this manual. This information alerts
you to potential hazards that could
hurt you or others.
Of course, it is not practical or
possible to warn you about all the
hazards associated with operating or
maintaining your vehicle. You must
use your own good judgement.
You will find this important safety information in a variety of forms,
including:
Safety Labels − on the vehicle.
Safety Messages − preceded by a safety alert symbol
and one of
three signal words: DANGER, WARNING, or CAUTION.
These signal words mean:
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
Safety Headings − such as Important Safety Reminders or Important
Safety Precautions.
Safety Section − such as Driver and Passenger Safety.
Instructions − how to use this vehicle correctly and safely.
This entire book is filled with important safety information − please read it
carefully.
ii
05/09/13 19:40:35 31SCV630 0004 Important Handling Information
Your Element has higher ground clearance than a passenger vehicle designed for use only on pavement. Higher
ground clearance has many advantages for off-highway driving. It allows you to travel over bumps, obstacles, and
rough terrain. It also provides good visibility so you can anticipate problems earlier.
These advantages come at some cost. Because your vehicle is taller and rides higher off the ground, it has a high
center of gravity. This means your vehicle can tip or roll over if you make abrupt turns. Utility vehicles have a
significantly higher rollover rate than other types of vehicles. In a rollover crash, an unbelted person is significantly
more likely to die than a person wearing a seat belt. As a reminder, make sure you and your passengers always wear
seat belts.
For information on how to reduce the risk of rollover, read ‘‘Driving Guidelines’’ on page 138 of this manual and the
Off-Highway Driving Guidelines section on page 157 . Failure to operate your vehicle correctly might result in loss of
control or an accident.
iii
05/09/13 19:40:37 31SCV630 0005 05/09/13 19:40:46 31SCV630 0006 Contents
Your Vehicle at a Glance (main controls) ................................................................................................ 4
Driver and Passenger Safety (seat belts, SRS, and child protection) ............................................................. 7
Instruments and Controls (indicators, gauges, dashboard, and steering column) ........................................... 51
Features (heating and cooling, audio, steering wheel, and cruise control) ...................................................... 89
Before Driving (fuel, vehicle break-in, and cargo loading) ........................................................................ 123
Driving (engine and transmission operation).......................................................................................... 137
Maintenance (schedules, fluid checking, minor services, and vehicle storage) .............................................. 161
Taking Care of the Unexpected (flat tire, dead battery, overheating, and fuses) .......................................... 195
Technical Information (vehicle specifications, tires, fuel, and emissions controls) ........................................ 219
Warranty and Customer Relations (U.S. and Canada only) (warranty and contact information)................... 233
Authorized Manuals (U.S. only) (how to order) ................................................................................... 237
Service Information Summary (fluid capacities and tire pressures) ................................................... last page
1
INDEX
Index ................................................................................................................................................. I
05/09/13 19:40:48 31SCV630 0007 2
05/09/13 19:41:04 31SCV630 0008 Overview of Contents
Contents
A convenient reference to the
sections in this manual.
Your Vehicle at a Glance
A quick reference to the main
controls in your vehicle.
Driver and Passenger Safety
Important information about the
proper use and care of your vehicle’s
seat belts, an overview of the
supplemental restraint system, and
valuable information on how to
protect children with child restraints.
Instruments and Controls
Explains the purpose of each
instrument panel indicator and gauge,
and how to use the controls on the
dashboard and steering column.
Features
How to operate the heating and air
conditioning system, the audio
system, and other convenience
features.
Before Driving
What gasoline to use, how to breakin your new vehicle, and how to load
luggage and other cargo.
Driving
The proper way to start the engine,
shift the transmission, and park; plus
what you need to know if you’re
planning to tow a trailer.
Technical Information
ID numbers, dimensions, capacities,
and technical information.
Warranty and Customer
Relations
(U.S. and Canada only)
A summary of the warranties
covering your new vehicle, and how
to contact us for any reason. Refer to
your warranty manual for detailed
information.
Maintenance
The maintenance schedule shows
you when you need to take your
vehicle to the dealer. There is also a
list of things to check and
instructions on how to check them.
Authorized Manuals
(U.S. only)
How to order manuals and other
technical literature.
Taking Care of the Unexpected
This section covers several problems
motorists sometimes experience,
and details how to handle them.
Service Information Summary
A summary of the information you
need when you pull up to the fuel
pump.
Index
3
05/09/13 19:41:10 31SCV630 0009 Your Vehicle at a Glance
POWER DOOR
LOCK SWITCH
(P.70)
MIRROR CONTROLS
(P.82)
INSTRUMENT PANEL (P.53)
GAUGES (P.58)
AIRBAGS
(P.11, 23)
HEATING/COOLING
CONTROLS
(P.90)
POWER WINDOW
SWITCHES
(P.81)
PARKING BRAKE
(P.83)
HOOD RELEASE
HANDLE
(P.127)
A/T model is shown.
4
AUTOMATIC TRANSMISSION (P.143)
MANUAL TRANSMISSION (P.139)
05/09/13 19:41:16 31SCV630 0010 Your Vehicle at a Glance
WINDSHIELD WIPERS/WASHERS
(P.61)
Your Vehicle at a Glance
HEADLIGHTS/TURN SIGNALS
(P.62)
AUDIO SYSTEM
(P.94)
DIGITAL CLOCK
(P.117)
REAR WINDOW
DEFOGGER
(P.63)
HORN*
CRUISE CONTROL
MASTER BUTTON
(P.120)
A/T model is shown.
STEERING WHEEL ADJUSTMENT
(P.64)
HAZARD WARNING
BUTTON
(P.63)
CRUISE CONTROL BUTTONS
(P.120)
* : To use the horn, press the center pad of the steering wheel.
5
05/09/13 19:41:18 31SCV630 0011 6
05/09/13 19:41:22 31SCV630 0012 Driver and Passenger Safety
Important Safety Precautions .......... 8
Your Vehicle’s Safety Features........ 9
Seat Belts ...................................... 10
Airbags .......................................... 11
Protecting Adults and Teens.......... 12
1. Close and Lock the Doors ...... 12
2. Adjust the Front Seats ............ 12
3. Adjust the Seat-Backs ............. 14
4. Adjust the Head Restraints .... 15
5. Fasten and Position the
Seat Belts ............................. 15
6. Maintain a Proper Sitting
Position ................................. 17
Advice for Pregnant Women...... 18
Additional Safety Precautions .... 19
Additional Information About Your
Seat Belts .................................. 20
Seat Belt System Components ... 20
Lap/Shoulder Belt ....................... 20
Automatic Seat Belt
Tensioners ................................ 21
Seat Belt Maintenance ................ 21
Additional Information About Your
Airbags ...................................... 23
Airbag System Components ....... 23
How Your Front Airbags
Work.......................................... 24
How Your Side Airbags Work.... 26
How the SRS Indicator
Works ........................................ 27
How the Side Airbag Off
Indicator Works ....................... 28
Airbag Service .............................. 28
Additional Safety Precautions .... 29
Protecting Children − General
Guidelines ................................. 30
All Children Must Be
Restrained ................................ 30
All Children Should Sit in a
Back Seat .................................. 31
The Passenger’s Front Airbag
Poses Serious Risks ................ 31
If You Must Drive with Several
Children .................................... 33
If a Child Requires Close
Attention ................................... 33
Additional Safety Precautions .... 34
Protecting Infants and
Small Children.......................... 35
Protecting Infants ........................ 35
Protecting Small Children .......... 36
Selecting a Child Seat ...................... 37
Installing a Child Seat ..................... 38
With LATCH ................................ 39
With a Lap/Shoulder Belt .......... 41
With a Tether ............................... 43
Protecting Larger Children ............ 44
Checking Seat Belt Fit ................ 44
Using a Booster Seat ................... 45
When Can a Larger Child Sit in
Front .......................................... 45
Additional Safety Precautions .... 46
Carbon Monoxide Hazard .............. 47
Safety Labels .................................... 48
7
Driver and Passenger Safety
This section gives you important
information about how to protect
yourself and your passengers. It
shows you how to use seat belts. It
explains how your airbags work. And
it tells you how to properly restrain
infants and children in your vehicle.
05/09/13 19:41:32 31SCV630 0013 Important Safety Precautions
You’ll find many safety
recommendations throughout this
section, and throughout this manual.
The recommendations on this page
are the ones we consider to be the
most important.
Always Wear Your Seat Belt
A seat belt is your best protection in
all types of collisions. Airbags are
designed to supplement seat belts,
not replace them. So even though
your vehicle is equipped with airbags,
make sure you and your passengers
always wear your seat belts, and
wear them properly (see page 15 ).
Restrain All Children
Children age 12 and under should
ride properly restrained in a back
seat. Infants and small children
should be restrained in a child seat.
Larger children should use a booster
seat and a lap/shoulder belt until
they can use the belt properly
without a booster (see pages 30 −
46 ).
Be Aware of Airbag Hazards
While airbags can save lives, they
can cause serious or fatal injuries to
occupants who sit too close to them,
or are not properly restrained.
Infants, young children, and short
adults are at the greatest risk. Be
sure to follow all instructions and
warnings in this manual.
Don’t Drink and Drive
Alcohol and driving don’t mix. Even
one drink can reduce your ability to
respond to changing conditions, and
your reaction time gets worse with
8
every additional drink. So don’t drink
and drive, and don’t let your friends
drink and drive, either.
Control Your Speed
Excessive speed is a major factor in
crash injuries and deaths. Generally,
the higher the speed, the greater the
risk, but serious injuries can also
occur at lower speeds. Never drive
faster than is safe for current
conditions, regardless of the
maximum speed posted.
Keep Your Vehicle in Safe
Condition
Having a tire blowout or a
mechanical failure can be extremely
hazardous. To reduce the possibility
of such problems, check your tire
pressures and condition frequently,
and perform all regularly scheduled
maintenance (see page 163 ).
05/09/13 19:41:38 31SCV630 0014 Your Vehicle’s Safety Features
(10) (8)
(3)
(7)
(1)
(5)
(9)
(2)
(8)
(6)
(2)
(1) Safety Cage
(2) Crush Zones
(3) Seats and Seat-Backs
(4) Head Restraints
(5) Collapsible Steering Column
(6) Seat Belts
(7) Front Airbags
(8) Side Airbags
(standard on EX model)
(9) Front Seat Belt Tensioners
(10) Door Locks
Some features do not require any
action on your part. These include a
strong steel framework that forms a
safety cage around the passenger
compartment; front and rear crush
zones; a collapsible steering column;
and tensioners that tighten the front
seat belts in a crash.
However, you and your passengers
can’t take full advantage of these
features unless you remain sitting in
a proper position and always wear
your seat belts. In fact, some safety
features can contribute to injuries if
they are not used properly.
The following pages explain how you
can take an active role in protecting
yourself and your passengers.
9
Driver and Passenger Safety
Your vehicle is equipped with many
features that work together to
protect you and your passengers
during a crash.
(4)
05/09/13 19:41:49 31SCV630 0015 Your Vehicle’s Safety Features
Seat Belts
Your vehicle is equipped with seat
belts in all seating positions.
Your seat belt system also includes
an indicator on the instrument panel
to remind you and your passengers
to fasten your seat belts.
Why Wear Seat Belts
Seat belts are the single most
effective safety device for adults and
larger children. (Infants and smaller
children must be properly restrained
in child seats.)
Not wearing a seat belt properly
increases the chance of serious
injury or death in a crash, even
though your vehicle has airbags.
In addition, most states and all
Canadian provinces require you to
wear seat belts.
10
Not wearing a seat belt properly
increases the chance of serious
injury or death in a crash, even
though your vehicle has airbags.
Be sure you and your
passengers always wear seat
belts and wear them properly.
When properly worn, seat belts:
Keep you connected to the vehicle
so you can take advantage of the
vehicle’s built-in safety features.
Help protect you in almost every
type of crash, including frontal,
side, and rear impacts and
rollovers.
Help keep you from being thrown
against the inside of the vehicle
and against other occupants.
Keep you from being thrown out
of the vehicle.
Help keep you in a good position
should the airbags ever deploy. A
good position reduces the risk of
injury from an inflating airbag and
allows you to get the best
advantage from the airbag.
Of course, seat belts cannot
completely protect you in every
crash. But in most cases, seat belts
can reduce your risk of serious
injury.
What You Should Do:
Always wear your seat belt, and
make sure you wear it properly.
05/09/13 19:41:57 31SCV630 0016 Your Vehicle’s Safety Features
The most important things you need
to know about your airbags are:
Airbags
Airbags offer no protection in rear
impacts, or minor frontal or side
collisions.
Airbags can pose hazards. To do
Your vehicle has a supplemental
restraint system (SRS) with front
airbags to help protect the heads and
chests of the driver and a front seat
passenger during a moderate to
severe frontal collision (see page
24 for more information on how
your front airbags work).
Standard on EX models
Your vehicle has side airbags to help
protect the upper torso of the driver
or a front seat passenger during a
moderate to severe side impact (see
page 26 for more information on how
your side airbags work).
their job, airbags must inflate with
tremendous force. So while
airbags help save lives, they can
cause minor injuries or more
serious or even fatal injuries if
occupants are not properly
restrained or sitting properly.
What you should do: Always wear
your seat belt properly, and sit
upright and as far back from the
steering wheel as possible while
allowing full control of the vehicle. A
front passenger should move their
seat as far back from the dashboard
as possible.
11
Driver and Passenger Safety
Airbags do not replace seat belts.
They are designed to supplement
the seat belts.
05/09/13 19:42:08 31SCV630 0017 Protecting Adults and Teens
The rest of this section gives more
detailed information about how you
can maximize your safety.
Remember, however, that no safety
system can prevent all injuries or
deaths that can occur in a severe
crash, even when seat belts are
properly worn and the airbags deploy.
Introduction
The following pages provide
instructions on how to properly
protect the driver, adult passengers,
and teenage children who are large
enough and mature enough to drive
or ride in the front.
See pages 30 − 46 for important
guidelines on how to properly
protect infants, small children, and
larger children who ride in your
vehicle.
1.Close and Lock the Doors
After everyone has entered the
vehicle, be sure the doors are closed
and locked.
Your vehicle
has a door
monitor indicator on the instrument
panel to indicate when a specific
door or the tailgate or the hatch is
not tightly closed.
Locking the doors reduces the
chance of someone being thrown out
of the vehicle during a crash and it
helps prevent passengers from
accidentally opening and falling out.
Locking the doors also helps prevent
an outsider from unexpectedly
opening a door when you come to a
stop.
See page 70 for how to lock the
doors, and page 57 for how the door
monitor indicator works.
12
2.Adjust the Front Seats
Adjust the driver’s seat as far to the
rear as possible while allowing you to
maintain full control of the vehicle.
Have a front passenger adjust their
seat as far to the rear as possible.
If you sit too close to the steering
wheel or dashboard, you can be
seriously injured by an inflating front
airbag, or by striking the steering
wheel or dashboard.
05/09/13 19:42:13 31SCV630 0018 Protecting Adults and Teens
If you cannot get far enough away
from the steering wheel and still
reach the controls, we recommend
that you investigate whether some
type of adaptive equipment may help.
See page 73 for how to adjust the
front seats.
Sitting too close to a front
airbag can result in serious
injury or death if the front
airbags inflate.
Driver and Passenger Safety
The National Highway Traffic Safety
Administration and Transport
Canada recommend that drivers
allow at least 10 inches (25 cm)
between the center of the steering
wheel and the chest.
Always sit as far back from the
front airbags as possible.
13
05/09/13 19:42:19 31SCV630 0019 Protecting Adults and Teens
3.Adjust the Seat-Backs
Reclining a seat-back so that the
shoulder part of the belt no longer
rests against the occupant’s chest
reduces the protective capability of
the belt. It also increases the chance
of sliding under the belt in a crash
and being seriously injured. The
farther a seat-back is reclined, the
greater the risk of injury.
Reclining the seat-back too far
can result in serious injury or
death in a crash.
Adjust the seat-back to an
upright position, and sit well
back in the seat.
See page 73 for how to adjust the
seat-backs.
Adjust the driver’s seat-back to a
comfortable, upright position,
leaving ample space between your
chest and the airbag cover in the
center of the steering wheel.
Passengers with adjustable seatbacks should also adjust their seatback to a comfortable, upright
position.
14
05/09/13 19:42:27 31SCV630 0020 Protecting Adults and Teens
4.Adjust the Head Restraints
Make sure head restraints are
in place and positioned properly
before driving.
Adjust the driver’s head restraint so
the back of your head rests against
the center of the restraint.
Properly adjusted head restraints
will help protect occupants from
whiplash and other crash injuries.
See page 75 for how to adjust the
head restraints.
Have passengers with adjustable
head restraints adjust their restraints
properly as well. Taller persons
should adjust their restraint as high
as possible.
CONTINUED
15
Driver and Passenger Safety
Improperly positioning head
restraints reduces their
effectiveness and you can be
seriously injured in a crash.
5.Fasten and Position the Seat
Belts
Insert the latch plate into the buckle,
then tug on the belt to make sure the
belt is securely latched. Also check
that the belt is not twisted, because a
twisted belt can cause serious
injuries in a crash.
05/09/13 19:42:34 31SCV630 0021 Protecting Adults and Teens
If necessary, pull up on the belt again
to remove any slack, then check that
the belt rests across the center of
your chest and over your shoulder.
This spreads the forces of a crash
over the strongest bones in your
upper body.
RELEASE
BUTTONS
Improperly positioning the seat
belts can cause serious injury
or death in a crash.
Position the lap part of the belt as
low as possible across your hips,
then pull up on the shoulder part of
the belt so the lap part fits snugly.
This lets your strong pelvic bones
take the force of a crash and reduces
the chance of internal injuries.
16
Make sure all seat belts are
properly positioned before
driving.
If the seat belt touches or crosses
your neck, or if it crosses your arm
instead of your shoulder, you need to
adjust the seat belt anchor height.
The front seats have adjustable seat
belt anchors. To adjust the height of
an anchor, press and hold the release
buttons, and slide the anchor up or
down as needed (it has four
positions).
05/09/13 19:42:40 31SCV630 0022 Protecting Adults and Teens
Never place the shoulder portion of a
lap/shoulder belt under your arm or
behind your back. This could cause
If a seat belt does not seem to work
properly, it may not protect the
occupant in a crash.
Sitting improperly can increase the
chance of injury during a crash. For
example, if an occupant slouches,
lies down, turns sideways, sits
forward, leans forward or sideways,
or puts one or both feet up, the
chance of injury during a crash is
greatly increased.
No one should sit in a seat with an
inoperative seat belt. Using a seat
belt that is not working properly can
result in serious injury or death.
Have your dealer check the belt as
soon as possible.
See page 20 for additional
information about your seat belts
and how to take care of them.
CONTINUED
17
Driver and Passenger Safety
very serious injuries in a crash.
6.Maintain a Proper Sitting
Position
After all occupants have adjusted
their seats and put on seat belts, it is
very important that they continue to
sit upright, well back in their seats,
with their feet on the floor, until the
vehicle is parked and the engine is
off.
05/09/13 19:42:47 31SCV630 0023 Protecting Adults and Teens
In addition, an occupant who is out of
position in the front seat can be
seriously or fatally injured in a crash
by striking interior parts of the
vehicle or being struck by an
inflating front airbag.
Advice for Pregnant Women
This will reduce the risk of injuries
to both you and your unborn child
that can be caused by a crash or an
inflating front airbag.
Sitting improperly or out of
position can result in serious
injury or death in a crash.
Always sit upright, well back in
the seat, with your feet on the
floor.
18
When driving, remember to sit
upright and adjust the seat as far
back as possible while allowing full
control of the vehicle. When riding
as a front passenger, adjust the seat
as far back as possible.
If you are pregnant, the best way to
protect yourself and your unborn
child when driving or riding in a
vehicle is to always wear a seat belt,
and keep the lap part of the belt as
low as possible across the hips.
Each time you have a checkup, ask
your doctor if it’s okay for you to
drive.
05/09/13 19:42:55 31SCV630 0024 Protecting Adults and Teens
Additional Safety Precautions
could be very seriously injured in a
crash.
Passengers should not stand up or
change seats while the vehicle is
moving. A passenger who is not
wearing a seat belt during a crash
or emergency stop can be thrown
against the inside of the vehicle,
against other occupants, or out of
the vehicle.
Do not put any accessories on seat
belts. Devices intended to improve
Do not attach or place objects on
the front airbag covers. Objects on
occupant comfort or reposition the
shoulder part of a seat belt can
severely compromise the
protective capability of the seat
belt and increase the chance of
serious injury in a crash.
the covers marked ‘‘SRS AIRBAG’’
could interfere with the proper
operation of the airbags or be
propelled inside the vehicle and
hurt someone if the airbags inflate.
Do not place hard or sharp objects
between yourself and a front
airbag. Carrying hard or sharp
objects on your lap, or driving with
a pipe or other sharp object in
your mouth, can result in injuries
if your front airbag inflates.
On models with side airbags, do
not attach hard objects on or near
a front door. If a side airbag
inflates, a cup holder or other hard
object attached on or near the
door could be propelled inside the
vehicle and hurt someone.
Two people should never use the
same seat belt. If they do, they
Keep your hands and arms away
from the airbag covers. If your
could be very seriously injured in a
crash.
hands or arms are close to an
airbag cover, they could be injured
if the front airbag inflates.
19
Driver and Passenger Safety
Never let passengers ride in the
cargo area or on top of a foldeddown back seat. If they do, they
05/09/13 19:43:04 31SCV630 0025 Additional Information About Your Seat Belts
Seat Belt System Components
Your seat belt system includes lap/
shoulder belts in all four seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you to fasten your seat belt.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belt, the beeper will sound,
and the indicator will flash. If you do
not fasten your seat belt before the
beeper stops, the indicator will stop
flashing but remains on.
If you continue driving without
fastening your seat belt, the beeper
will sound and the indicator will flash
again at regular intervals.
20
Lap/Shoulder Belt
The lap/shoulder belt goes over
your shoulder, across your chest,
and across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page 15 for how to
properly position the belt).
To unlock the belt, press the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
The seat belts in all positions except
the driver’s have an additional
locking mechanism that must be
activated to secure a child seat (see
page 41 ).
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the seat belt, pull it out only
as far as needed.
05/09/13 19:43:13 31SCV630 0026 Additional Information About Your Seat Belts
Automatic Seat Belt Tensioners
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
manner.
Pull each belt out fully, and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning the belt
may correct the problem (see page
185 ). Any belt that is not in good
condition or working properly will
not provide good protection and
should be replaced as soon as
possible.
If the front seat belt tensioners ever
activate, they must be replaced as
the belts will no longer retract
properly.
Honda provides a lifetime warranty
on seat belts for U.S. models. See
your Honda Warranty Information
booklet for details.
The tensioners can also be activated
during a collision in which the front
airbags do not deploy. In this case, the
airbags would not be needed, but the
additional restraint could be helpful.
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in place.
Seat Belt Maintenance
For safety, you should check the
condition of your seat belts regularly.
CONTINUED
21
Driver and Passenger Safety
The tensioners are designed to
activate in any collision severe
enough to cause front airbag
inflation.
05/09/13 19:43:17 31SCV630 0027 Additional Information About Your Seat Belts
If a seat belt is worn during a crash,
it must be replaced by the dealer. A
belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash.
The dealer should also inspect the
anchors for damage and replace
them if needed. If the automatic seat
belt tensioners activate during a
crash, they must be replaced.
22
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
05/09/13 19:43:25 31SCV630 0028 Additional Information About Your Airbags
Airbag System Components
Your airbag system includes:
On models equipped with two side
airbags, one for the driver and one
for a front passenger. The airbags
are stored in the outer edges of
the seat-backs. Both are marked
‘‘SIDE AIRBAG’’ (see page 26 ).
Automatic seat belt tensioners
(see page 21 ).
Sensors that can detect a
moderate to severe front impact,
or side impact in models with side
airbags.
A sophisticated electronic system
that continually monitors and
records information about the
sensors, the control unit, the
airbag activators, the seat belt
tensioners, and driver and front
passenger seat belt use when the
ignition switch is in the ON (II)
position.
On models equipped with side
airbags, an indicator on the
dashboard that alerts you that the
passenger’s side airbag has been
turned off (see page 28 ).
Emergency backup power in case
your vehicle’s electrical system is
disconnected in a crash.
An indicator on the instrument
panel that alerts you to a possible
problem with your airbags,
sensors, or seat belt tensioners
(see page 27 ).
23
Driver and Passenger Safety
Two SRS (supplemental restraint
system) front airbags. The driver’s
airbag is stored in the center of
the steering wheel; the front
passenger’s airbag is stored in the
dashboard. Both are marked ‘‘SRS
AIRBAG’’ (see page 24 ).
On models with side airbags,
sensors that can detect whether
a child is in the passenger’s side
airbag path and automatically
turn the airbag off (see page
26 ).
05/09/13 19:43:32 31SCV630 0029 Additional Information About Your Airbags
How Your Front Airbags Work
During a frontal crash, your seat belt
restrains your lower body and torso,
and the front airbag helps protect
your head and chest.
Although both airbags normally
inflate within a split second of each
other, it is possible for only one
airbag to deploy.
If you ever have a moderate to
severe frontal collision, sensors will
detect the vehicle’s rapid
deceleration.
If the rate of deceleration is high
enough, the control unit will instantly
inflate the driver’s and front
passenger’s airbags, at the time and
with the force needed.
24
This can happen if the severity of a
collision is at the margin, or
threshold, that determines whether
or not the airbags will deploy. In
such cases, the seat belt will provide
sufficient protection, and the
supplemental protection offered by
the airbag would be minimal.
After inflating, the front airbags
immediately deflate, so they won’t
interfere with the driver’s visibility,
or the ability to steer or operate
other controls.
05/09/13 19:43:40 31SCV630 0030 Additional Information About Your Airbags
After a crash, you may see what
looks like smoke. This is actually
powder from the airbag’s surface.
Although the powder is not harmful,
people with respiratory problems
may experience some temporary
discomfort. If this occurs, get out of
the vehicle as soon as it is safe to do
so.
Dual-Stage Airbags
Dual-Threshold Airbags
Your front airbags are dual-stage
airbags. This means they have two
inflation stages that can be ignited
sequentially or simultaneously,
depending on crash severity.
Your front airbags are also dualthreshold airbags. Airbags with this
feature have two deployment
thresholds that depend on whether
or not the occupant is wearing a seat
belt.
In a more severe crash, both stages
will ignite simultaneously to provide
the quickest and greatest protection.
In a less severe crash, one stage will
ignite first, then the second stage
will ignite a split second later. This
provides longer airbag inflation time
with a little less force.
If the occupant’s belt is not latched,
the airbag will deploy at a slightly
lower threshold, because the
occupant would need extra
protection.
If the occupant’s belt is latched, the
airbag will deploy at a slightly higher
threshold, when the airbag would be
needed to supplement the protection
provided by the seat belt.
25
Driver and Passenger Safety
The total time for inflation and
deflation is one-tenth of a second, so
fast that most occupants are not
aware that the airbags deployed until
they see them lying in their laps.
05/09/13 19:43:49 31SCV630 0031 Additional Information About Your Airbags
How Your Side Airbags Work
Standard on EX models
To get the best protection from the
side airbags, front seat occupants
should wear their seat belts and sit
upright and well back in their seats.
Side Airbag Cutoff System
Your vehicle has a side airbag cutoff
system designed primarily to protect
a child riding in the front passenger’s
seat.
If you ever have a moderate to
severe side impact, sensors will
detect rapid deceleration and signal
the control unit to instantly inflate
either the driver’s or the passenger’s
side airbag.
Only one airbag will deploy during a
side impact. If the impact is on the
passenger’s side, the passenger’s
side airbag will deploy even if there
is no passenger.
26
Although Honda does not encourage
children to ride in front, if the
sensors in the seat detect a child has
leaned into the side airbag’s
deployment path, the airbag will shut
off.
The side airbag may also shut off if a
short adult leans sideways, or a
larger adult slouches and leans
sideways into the airbag’s
deployment path.
Objects placed on the front
passenger seat can also cause the
side airbag to be shut off.
If the side airbag off indicator comes
on (see page 28 ), have the
passenger sit upright. Once the
passenger is out of the airbag’s
deployment path, the system will
turn the airbag back on, and the
indicator will go out.
There will be some delay between
the moment the passenger moves
into or out of the airbag deployment
path and when the indicator comes
on or goes off.
A front seat passenger should not
use a cushion or other object as a
backrest. It may prevent the cutoff
system from working properly.
05/09/13 19:43:56 31SCV630 0032 Additional Information About Your Airbags
When you turn the ignition switch to
the ON (II) position, this indicator
comes on briefly then goes off. This
tells you the system is working
properly.
If the indicator comes on at any
other time, or does not come on at all,
you should have the system checked
by your dealer. For example:
If the SRS indicator does not come
on after you turn the ignition
switch to the ON (II) position.
If the indicator stays on after the
engine starts.
Ignoring the SRS indicator can
result in serious injury or death
if the airbag systems or
tensioners do not work properly.
Have your vehicle checked by a
dealer as soon as possible if
the SRS indicator alerts you to
a possible problem.
If the indicator comes on or
flashes on and off while you drive.
If you see any of these indications,
the airbags and seat belt tensioners
may not work properly when you
need them.
27
Driver and Passenger Safety
How the SRS Indicator Works
The SRS indicator alerts
you to a potential problem
with your airbags or seat belt
tensioners.
05/09/13 19:44:04 31SCV630 0033 Additional Information About Your Airbags
How the Side Airbag Off
Indicator Works
Standard on U.S. EX models and
Canadian Y package
U.S.
Canada
This indicator alerts you that the
passenger’s side airbag has been
automatically shut off. It does not
mean there is a problem with your
side airbags.
When you turn the ignition switch to
the ON (II) position, the indicator
should come on briefly and go off
(see page 55 ). If it doesn’t come on,
stays on, or comes on while driving
without a passenger in the front seat,
have the system checked.
28
Airbag Service
Your airbag systems are virtually
maintenance free, and there are no
parts you can safely service.
However, you must have your
vehicle serviced if:
An airbag ever inflates. Any airbag
that has deployed must be
replaced along with the control
unit and other related parts. If a
front airbag inflates, the seat belt
tensioners must also be replaced.
Do not try to remove or replace
any airbag by yourself. This must
be done by a dealer or a
knowledgeable body shop.
The SRS indicator alerts you to a
problem. Take your vehicle to an
authorized dealer as soon as
possible. If you ignore this
indication, your airbags may not
operate properly.
05/09/13 19:44:09 31SCV630 0034 Additional Information About Your Airbags
Additional Safety Precautions
Do not attempt to deactivate your
airbags. Together, airbags and
Do not tamper with airbag
components or wiring for any
reason. Tampering could cause
Driver and Passenger Safety
seat belts provide the best
protection.
Models with side airbags:
Do not cover or replace front seatback covers without consulting
your dealer. Improperly replacing
or covering front seat-back covers
can prevent your side airbags from
inflating during a side impact.
the airbags to deploy, possibly
causing very serious injury.
Do not expose the front seat-backs
to liquid. If water or another liquid
soaks into a seat-back, it can
prevent the side airbag cutoff
system from working properly.
29
05/09/13 19:44:18 31SCV630 0035 Protecting Children − General Guidelines
All Children Must Be Restrained
Each year, many children are injured
or killed in vehicle crashes because
they are either unrestrained or not
properly restrained. In fact, vehicle
accidents are the number one cause
of the death of children ages 12 and
under.
Children depend on adults to protect
them. However, despite their best
intentions, many adults do not know
how to properly protect child
passengers.
If you have children, or ever need to
drive with a child in your vehicle, be
sure to read this section. It begins
with important general guidelines,
then presents special information for
infants, small children, and larger
children.
30
To reduce the number of child
deaths and injuries, every state and
Canadian province requires that
infants and children be properly
restrained when they ride in a
vehicle.
Infants and small children must be
restrained in an approved child seat
that is properly secured to the
vehicle (see pages 35 − 43 ).
Children who are unrestrained
or improperly restrained can be
seriously injured or killed in a
crash.
Any child too small for a seat
belt should be properly
restrained in a child seat. A
larger child should be properly
restrained with a seat belt and
use a booster seat if necessary.
Larger children must be restrained
with a lap/shoulder belt and ride on
a booster seat until the seat belt fits
them properly (see pages 44 − 46 ).
05/09/13 19:44:27 31SCV630 0036 Protecting Children − General Guidelines
The Passenger’s Front Airbag
Poses Serious Risks
Front airbags have been designed to
help protect adults in a moderate to
severe frontal collision. To do this,
the passenger’s front airbag is quite
large, and it can inflate with enough
force to cause very serious injuries.
Children who ride in back are less
likely to be injured by striking
interior vehicle parts during a
collision or hard braking. Also,
children cannot be injured by an
inflating front airbag when they ride
in the back.
the airbag inflates, it can hit the back
of the child seat with enough force
to kill or very seriously injure an
infant.
Infants
Never put a rear-facing child seat in
the front seat of a vehicle equipped
with a passenger’s front airbag. If
Small Children
Placing a forward-facing child seat in
the front seat of a vehicle equipped
with a passenger’s front airbag can
be hazardous. If the vehicle seat is
too far forward, or the child’s head is
thrown forward during a collision, an
inflating front airbag can strike the
child with enough force to kill or
very seriously injure a small child.
Larger Children
Children who have outgrown child
seats are also at risk of being injured
or killed by an inflating passenger’s
front airbag. Whenever possible,
larger children should sit in the back
seat, on a booster seat if needed, and
be properly restrained with a seat
belt (see page 44 for important
information about protecting larger
children).
CONTINUED
31
Driver and Passenger Safety
All Children Should Sit in a Back
Seat
According to accident statistics,
children of all ages and sizes are
safer when they are restrained in a
back seat. The National Highway
Traffic Safety Administration and
Transport Canada recommend that
all children age 12 and under be
properly restrained in a back seat.
Some states have laws restricting
where children may ride.
05/09/13 19:44:40 31SCV630 0037 Protecting Children − General Guidelines
To remind you of the passenger’s
front airbag hazards, and that
children must be properly restrained
in a back seat, your vehicle has
warning labels on the dashboard
(U.S. models) and on the front visors.
Please read and follow the
instructions on these labels.
U.S. Models
32
Canadian Models
05/09/13 19:44:48 31SCV630 0038 Protecting Children − General Guidelines
Place the largest child in the front
seat, provided the child is large
enough to wear the lap/shoulder
belt properly (see page 44 ).
Move the vehicle seat as far to the
rear as possible (see page 73 ).
If a Child Requires Close
Attention
Many parents say they prefer to put
an infant or a small child in the front
passenger seat so they can watch the
child, or because the child requires
attention.
If a child requires physical attention
or frequent visual contact, we
strongly recommend that another
adult ride with the child in the back
seat. The back seat is far safer for a
child than the front.
Placing a child in the front seat
exposes the child to hazards in a
frontal collision, and paying close
attention to a child distracts the
driver from the important tasks of
driving, placing both of you at risk.
Have the child sit upright and well
back in the seat (see page 17 ).
Make sure the seat belt is properly
positioned and secured (see page
15 ).
33
Driver and Passenger Safety
If You Must Drive with Several
Children
Your vehicle has two back seats
where children can be properly
restrained. If you ever have to carry
three children, and a child must ride
in front:
05/09/13 19:44:55 31SCV630 0039 Protecting Children − General Guidelines
Additional Safety Precautions
Never hold an infant or child on
your lap. If you are not wearing a
seat belt in crash, you could be
thrown forward and crush the
child against the dashboard or a
seat-back. If you are wearing a
seat belt, the child can be torn
from your arms and be seriously
hurt or killed.
Never put a seat belt over yourself
and a child. During a crash, the
belt could press deep into the child
and cause serious or fatal injuries.
Never let two children use the
same seat belt. If they do, they
could be very seriously injured in a
crash.
34
Do not leave children alone in a
vehicle. Leaving children without
adult supervision is illegal in most
states and Canadian provinces,
and can be very hazardous.
For example, infants and small
children left in a vehicle on a hot
day can die from heatstroke. A
child left alone with the key in the
ignition switch can accidentally set
the vehicle in motion, possibly
injuring themselves or others.
Lock all doors, the tailgate and the
hatch when your vehicle is not in
use. Children who play in vehicles
can accidentally get trapped inside.
Teach your children not to play in
or around vehicles.
Keep vehicle keys and remote
transmitters (on some models) out
of the reach of children. Even very
young children learn how to
unlock vehicle doors, turn on the
ignition, and open the tailgate or
hatch, which can lead to accidental
injury or death.
05/09/13 19:45:04 31SCV630 0040 Protecting Infants and Small Children
Protecting Infants
Do not put a rear-facing child seat in
a forward-facing position. If placed
facing forward, an infant could be
very seriously injured during a
frontal collision.
Child Seat Type
An infant must be properly
restrained in a rear-facing, reclining
child seat until the child reaches the
seat maker’s weight or height limit
for the seat, and the child is at least
one year old.
Placing a rear-facing child seat
in the front seat can result in
serious injury or death if the
passenger’s front airbag inflates.
Child Seat Placement
A rear-facing child seat can be placed
in any seating position in the back
seat, but not in the front. Never put a
rear-facing child seat in the front
seat.
If the passenger’s front airbag
inflates, it can hit the back of the
child seat with enough force to kill or
seriously injure an infant.
When properly installed, a rearfacing child seat may prevent the
driver or a front passenger from
moving their seat as far back as
recommended, or from locking their
seat-back in the desired position.
Always place a rear-facing child
seat in the back seat, not the
front.
Only a rear-facing child seat provides
proper support for a baby’s head,
neck, and back.
CONTINUED
35
Driver and Passenger Safety
Two types of seats may be used: a
seat designed exclusively for infants,
or a convertible seat used in the rearfacing, reclining mode.
05/09/13 19:45:12 31SCV630 0041 Protecting Infants and Small Children
In either situation, we strongly
recommend that you install the child
seat directly behind the front
passenger seat, move the seat as far
forward as needed, and leave it
unoccupied. Or you may wish to get
a smaller rear-facing child seat.
Protecting Small Children
We also recommend that a small
child use the child seat as long as
possible, until the child reaches the
weight or height limit for the seat.
Child Seat Placement
We strongly recommend placing a
forward-facing child seat in a back
seat, not the front.
Placing a forward-facing child seat in
the front seat of a vehicle equipped
with a passenger’s airbag can be
hazardous. If the vehicle seat is too
Child Seat Type
A child who is at least 1 year old, and
who fits within the child seat maker’s
weight and height limits, should be
restrained in a forward-facing,
upright child seat.
Of the different seats available, we
recommend those that have a fivepoint harness system as shown.
36
far forward, or the child’s head is
thrown forward during a collision, an
inflating airbag can strike the child
with enough force to cause very
serious or fatal injuries.
05/09/13 19:45:20 31SCV630 0042 Protecting Infants and Small Children, Selecting a Child Seat
Selecting a Child Seat
When buying a child seat, you need
to choose either a conventional child
seat, or one designed for use with
the lower anchors and tethers for
children (LATCH) system.
Placing a forward-facing child
seat in the front seat can result
in serious injury or death if the
front airbag inflates.
Conventional child seats must be
secured to a vehicle with a seat belt,
whereas LATCH-compatible seats
are secured by attaching the seat to
hardware built into the two second
row seats.
In seating positions and vehicles not
equipped with LATCH, a LATCHcompatible child seat can be installed
using a seat belt.
Whatever type of seat you choose, to
provide proper protection, a child
seat should meet three
requirements:
1. The child seat should meet U.S. or
Canadian Motor Vehicle Safety
Standard 213. Look for FMVSS
213 or CMVSS 213 on the box.
If you must place a forwardfacing child seat in front, move
the vehicle seat as far back as
possible, and properly restrain
the child.
Since LATCH-compatible child seats
are easier to install and reduce the
possibility of improper installation,
we recommend selecting this style.
2. The child seat should be of the
proper type and size to fit the child.
Rear-facing for infants, forwardfacing for small children.
We also recommend selecting a
LATCH-compatible seat with a rigid,
rather than a flexible, anchor (see
page 39 ).
CONTINUED
37
Driver and Passenger Safety
If it is necessary to put a forwardfacing child seat in the front, move
the vehicle seat as far to the rear as
possible, and be sure the child seat is
firmly secured to the vehicle and the
child is properly strapped in the seat.
05/09/13 19:45:28 31SCV630 0043 Selecting a Child Seat, Installing a Child Seat
3. The child seat should fit the
vehicle seating position (or
positions) where it will be used.
Before purchasing a conventional
child seat, or using a previously
purchased one, we recommend that
you test the seat in the specific
vehicle seating position or positions
where the seat will be used.
Installing a Child Seat
After selecting a proper child seat
and a good place to install the seat,
there are three main steps in
installing the seat:
1. Properly secure the child seat to
the vehicle. All child seats must be
secured to the vehicle with the lap
part of a lap/shoulder belt or with
the LATCH (lower anchors and
tethers for children) system. A
child whose seat is not properly
secured to the vehicle can be
endangered in a crash.
2. Make sure the child seat is firmly
secured. After installing a child
seat, push and pull the seat
forward and from side-to-side to
verify that it is secure.
A child seat secured with a seat belt
should be installed as firmly as
possible. However, it does not need
to be ‘‘rock solid.’’ Some side-to-side
38
movement can be expected and
should not reduce the child seat’s
effectiveness.
If the child seat is not secure, try
installing it in a different seating
position, or use a different style of
child seat that can be firmly secured.
3. Secure the child in the child seat.
Make sure the child is properly
strapped in the child seat
according to the child seat maker’s
instructions. A child who is not
properly secured in a child seat
can be seriously injured in a crash.
The following pages provide
guidelines on how to properly install
a child seat. A forward-facing child
seat is used in all examples, but the
instructions are the same for rearfacing child seats.
05/09/13 19:45:36 31SCV630 0044 Installing a Child Seat
Installing a Child Seat with
LATCH
Rigid-type
ANCHOR COVER
Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) in the rear seats. The
lower anchors are located between
the seat-back and seat bottom, and
are to be used only with a child seat
designed for use with LATCH. The
location of each lower anchor is
marked with a small button above
the point.
Driver and Passenger Safety
MARKS
To install a LATCH-compatible child
seat:
1. Remove both anchor covers by
pulling forward.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
CONTINUED
39
05/09/13 19:45:44 31SCV630 0045 Installing a Child Seat
TETHER ANCHOR
ANCHOR COVER
Flexible-type
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
4. Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
40
5. Remove the head restraint (see
page 75 ). Make sure the removed
head restraints are secured in the
cargo area, and reinstalled when
the child seat is removed.
6. Route the tether strap over the top
of the seat-back, making sure the
strap is not twisted.
7. Slide the anchor cover open.
05/09/13 19:45:51 31SCV630 0046 Installing a Child Seat
TETHER ANCHOR
8. Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
9. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
In addition, the lap/shoulder belts in
all seating positions except the
driver’s have a locking mechanism
that must be activated to secure a
child seat.
1. With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.
CONTINUED
41
Driver and Passenger Safety
TETHER STRAP HOOK
Installing a Child Seat with a Lap/
Shoulder Belt
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
05/09/13 19:45:59 31SCV630 0047 Installing a Child Seat
2. To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor.
3. After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked, and
you will need to repeat these steps.
42
4. After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.
To remove slack, it may help to
put weight on the child seat, or
push on the back of the seat while
pulling up on the belt.
5. Push and pull the child seat
forward and from side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
To deactivate the locking
mechanism and remove a child
seat, unlatch the buckle, unroute
the seat belt, and let the belt fully
retract.
05/09/13 19:46:08 31SCV630 0048 Installing a Child Seat
Installing a Child Seat with a
Tether
TETHER ANCHOR
ANCHOR COVER
A child seat with a tether can be
installed in either back seat, using
one of the anchor points shown
above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
1. After securing the child seat in the
desired position (see page 41 ),
remove the head restraint (see
page 75 ), then route the tether
strap over the top of the seat-back.
2. Slide the anchor cover open as
shown.
TETHER ANCHOR
TETHER STRAP HOOK
3. Attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
4. Tighten the strap according to the
seat maker’s instructions. Make
sure the removed head restraint is
secured in the cargo area.
Reinstall the head restraint in
place when you remove the child
seat.
43
Driver and Passenger Safety
ANCHOR POINTS
05/09/13 19:46:16 31SCV630 0049 Protecting Larger Children
When a child reaches the
recommended weight or height limit
for a forward-facing child seat, the
child should sit in a back seat on a
booster seat and wear a lap/shoulder
belt.
The following pages give
instructions on how to check proper
seat belt fit, what kind of booster
seat to use if one is needed, and
important precautions for a child
who must sit in front.
Allowing a child age 12 or under
to sit in front can result in injury
or death if the passenger’s front
airbag inflates.
If a larger child must ride in front,
move the vehicle seat as far
back as possible, use a booster
seat if needed, have the child
sit up properly and wear the
seat belt properly.
44
Checking Seat Belt Fit
3. Does the shoulder belt cross
between the child’s neck and arm?
4. Is the lap part of the belt as low as
possible, touching the child’s
thighs?
5. Will the child be able to stay
seated like this for the whole trip?
To determine if a lap/shoulder belt
properly fits a child, have the child
put on the seat belt, then ask
yourself:
1. Does the child sit all the way back
against the seat?
2. Do the child’s knees bend
comfortably over the edge of the
seat?
If you answer yes to all these
questions, the child is ready to wear
the lap/shoulder belt correctly. If
you answer no to any question, the
child needs to ride on a booster seat.
05/09/13 19:46:25 31SCV630 0050 Protecting Larger Children
Booster seats can be high-back or
low-back. Whichever style you select,
make sure the booster meets federal
safety standards and that you follow
the booster seat maker’s instructions.
If a child who uses a booster seat
must ride in front, move the vehicle
seat as far back as possible and be
sure the child is wearing the seat
belt properly.
A child may continue using a booster
seat until the tops of their ears are
even with the top of the vehicle’s or
booster’s seat-back. A child of this
height should be tall enough to use
the lap/shoulder belt without a
booster seat.
Some states and Canadian provinces
also require children to use a booster
seat until they reach a given age or
weight (e.g., 6 years or 60 lbs). Be
sure to check current laws in the
states or provinces where you intend
to drive.
When Can a Larger Child Sit in
Front
The National Highway Traffic Safety
Administration and Transport
Canada recommend that all children
age 12 and under be properly
restrained in the back seat.
If the passenger’s front airbag
inflates in a moderate to severe
frontal collision, the airbag can cause
serious injuries to a child who is
unrestrained, improperly restrained,
sitting too close to the airbag, or out
of position.
A side airbag also poses risks. If any
part of a larger child’s body is in the
path of a deploying side airbag, the
child could receive possibly serious
injuries.
CONTINUED
45
Driver and Passenger Safety
Using a Booster Seat
A child who has outgrown a forwardfacing child seat should ride in a
back seat and use a booster seat
until the lap/shoulder belt fits them
properly without the booster.
05/09/13 19:46:36 31SCV630 0051 Protecting Larger Children
Of course, children vary widely. And
while age may be one indicator of
when a child can safely ride in front,
there are other important factors you
should consider.
If you decide that a child can safely
ride up front, be sure to:
Additional Safety Precautions
Do not let a child wear a seat belt
across the neck. This could result
Carefully read the owner’s manual,
and make sure you understand all
seat belt instructions and all safety
information.
in serious neck injuries during a
crash.
To safely ride in front, a child must
be able to follow the rules, including
sitting properly, and wearing the seat
belt properly throughout a ride.
Move the vehicle seat to the rearmost position.
Physical Size
Have the child sit up straight, back
against the seat, and feet on or
near the floor.
cause very serious injuries during
a crash. It also increases the
chance that the child will slide
under the belt in a crash and be
injured.
Maturity
Physically, a child must be large
enough for the lap/shoulder belt to
properly fit (see page 44 ). If the seat
belt does not fit properly, with or
without the child sitting on a booster
seat, the child should not sit in front.
46
Check that the child’s seat belt is
properly and securely positioned.
Supervise the child. Even mature
children sometimes need to be
reminded to fasten the seat belts
or sit properly.
Do not let a child put the shoulder
part of a seat belt behind the back
or under the arm. This could
Two children should never use the
same seat belt. If they do, they
could be very seriously injured in a
crash.
Do not put any accessories on a
seat belt. Devices intended to
improve a child’s comfort or
reposition the shoulder part of a
seat belt can make the belt less
effective and increase the chance
of serious injury in a crash.
05/09/13 19:46:44 31SCV630 0052 Carbon Monoxide Hazard
Have the exhaust system inspected
for leaks whenever:
Carbon monoxide gas is toxic.
Breathing it can cause
unconsciousness and even kill
you.
Avoid any enclosed areas or
activities that expose you to
carbon monoxide.
The vehicle is raised for an oil
change.
You notice a change in the sound
of the exhaust.
The vehicle was in an accident
that may have damaged the
underside.
High levels of carbon monoxide can
collect rapidly in enclosed areas,
such as a garage. Do not run the
engine with the garage door closed.
Even with the door open, run the
engine only long enough to move the
vehicle out of the garage.
With the tailgate or hatch open, air
flow can pull exhaust gas into your
vehicle’s interior and create a
hazardous condition. If you must
drive with the tailgate or hatch open,
open all the windows and set the
heating and cooling system as shown
below.
If you must sit in your parked vehicle
with the engine running, even in an
unconfined area, adjust the heating
and cooling system as follows:
1. Select the fresh air mode.
mode.
2. Select the
3. Turn the fan on high speed.
4. Set the temperature control to a
comfortable setting.
47
Driver and Passenger Safety
Your vehicle’s exhaust contains
carbon monoxide gas. You should
have no problem with carbon
monoxide entering the vehicle in
normal driving if you maintain your
vehicle properly.
05/09/13 19:46:56 31SCV630 0053 Safety Labels
These labels are in the locations
shown. They warn you of potential
hazards that could cause serious
injury. Read these labels carefully. If
a label comes off or becomes hard to
read, contact your dealer for a
replacement.
SUN VISOR
U.S. models
Canadian models
DASHBOARD
U.S. models only
U.S. models only
48
05/09/13 19:47:09 31SCV630 0054 Safety Labels
HOOD
On models with side airbags
On models without side airbags
Driver and Passenger Safety
On models with side airbags
RADIATOR CAP
49
05/09/13 19:47:11 31SCV630 0055 50
05/09/13 19:47:15 31SCV630 0056 Instruments and Controls
This section gives information about
the controls and displays that
contribute to the daily operation of
your vehicle. All the essential
controls are within easy reach.
Seats .................................................. 73
Seat Adjustments ......................... 73
Driver’s Seat Height
Adjustment ............................... 74
Front Seat Armrests .................... 74
Head Restraints ........................... 75
Rear Seat Access ......................... 75
Reclining the Front Seats ........... 76
Folding the Rear Seats ................ 77
Removing the Rear Seats ........... 79
Power Windows ............................... 81
Mirrors .............................................. 82
Adjusting the Power Mirrors ..... 82
Rear Windows .................................. 83
Parking Brake .................................. 83
Skylight ............................................. 83
Interior Convenience Items ............ 86
Beverage Holders ........................ 87
Accessory Power Sockets........... 87
Glove Box ..................................... 87
Interior Lights .................................. 88
Ceiling Light ................................. 88
Cargo Area Light ......................... 88
Spotlights ...................................... 88
Ignition Switch Light ................... 88
51
Instruments and Controls
Control Locations ............................ 52
Instrument Panel ............................. 53
Instrument Panel Indicators ........... 54
Gauges .............................................. 58
Trip Meter .................................... 58
Odometer ...................................... 58
Fuel Gauge ................................... 59
Check Fuel Cap Indicator ........... 59
Temperature Gauge .................... 59
Controls Near the Steering
Wheel ........................................ 60
Windshield Wipers and Washers .. 61
Turn Signal and Headlights............ 62
Instrument Panel Brightness ......... 63
Hazard Warning Button .................. 63
Rear Window Defogger .................. 63
Steering Wheel Adjustment ........... 64
Keys and Locks ................................ 65
Immobilizer System......................... 66
Remote Transmitter ........................ 67
Ignition Switch ................................. 69
Door Locks ....................................... 70
Power Door Locks ....................... 70
Rear Doors ................................... 70
Hatch ............................................. 71
Tailgate ......................................... 72
05/09/13 19:47:19 31SCV630 0057 Control Locations
POWER DOOR LOCK SWITCH
(P.70)
MIRROR CONTROLS (P.82)
CRUISE CONTROL
MASTER BUTTON
(P.120)
AUDIO SYSTEM
(P.94)
POWER WINDOW
SWITCHES
(P.81)
HEATING/COOLING
CONTROLS
(P.90)
HOOD RELEASE
HANDLE
(P.127)
CRUISE CONTROL
BUTTONS
(P. 120)
PARKING BRAKE
(P.83)
A/T model is shown.
52
05/09/13 19:47:26 31SCV630 0058 Instrument Panel
MALFUNCTION INDICATOR LAMP
(P.54, 210)
SEAT BELT
REMINDER
INDICATOR
(P.54)
HIGH BEAM INDICATOR
(P.56)
LOW FUEL INDICATOR
(P.56)
SUPPLEMENTAL RESTRAINT
SYSTEM INDICATOR
(P.55)
Instruments and Controls
LOW OIL PRESSURE INDICATOR
(P.54, 209)
TAILGATE AND HATCH
OPEN INDICATOR
(P.57)
PARKING BRAKE AND
BRAKE SYSTEM
INDICATOR*
(P.54, 211)
DOOR-OPEN
INDICATOR
(P.57)
MAINTENANCE
REQUIRED INDICATOR
(P.57)
CHARGING SYSTEM
INDICATOR
(P.54, 209)
CHECK FUEL CAP
INDICATOR
(P.59)
IMMOBILIZER
SYSTEM
INDICATOR
(P.55)
CRUISE CONTROL
INDICATOR
(P.56)
SIDE AIRBAG OFF
INDICATOR
(P.55)
ANTI-LOCK BRAKE
SYSTEM INDICATOR
(P.55)
*The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.
53
05/09/13 19:47:37 31SCV630 0059 Instrument Panel Indicators
The instrument panel has many
indicators that give you important
information about your vehicle.
Malfunction Indicator
Lamp
See page 210 .
Low Oil Pressure
Indicator
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page 209 .
Charging System
Indicator
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page 209 .
54
U.S.
Canada
Parking Brake and
Brake System
Indicator
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page 211 .
Seat Belt Reminder
Indicator
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belt, the beeper sounds
and the indicator flashes. If you do
not fasten your seat belt before the
beeper stops, the indicator stops
flashing but remains on.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals.
05/09/13 19:47:46 31SCV630 0060 Instrument Panel Indicators
Side Airbag Off Indicator
U.S.
Canada
Standard on U.S. EX models and
Canadian Y package
This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates that the
passenger’s side airbag has
automatically shut off. For more
information, see page 28 .
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With the
indicator on, your vehicle still has
normal braking ability but no antilock brakes. For more information,
see page 150 .
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It will
then go off if you have inserted a
properly-coded ignition key. If it is
not a properly-coded key, the
indicator will blink, and the engine
will not start (see page 66 ).
This indicator also blinks several
times when you turn the ignition
switch from the ON (II) position to
the ACCESSORY (I) or LOCK (0)
position.
55
Instruments and Controls
Supplemental Restraint
System Indicator
This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates a potential
problem with your front airbags or
automatic seat belt tensioners. On
models equipped with side airbags,
this indicator will also alert you to a
potential problem with your side
airbags or passenger’s side airbag
automatic cutoff system. For
complete information, see page 27 .
05/09/13 19:47:57 31SCV630 0061 Instrument Panel Indicators
‘‘Daytime Running
Lights’’ Indicator
Turn Signal and Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicators do not blink
or they blink rapidly, it usually
means one of the turn signal bulbs is
burned out (see page 180 ). Replace
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you turn on the hazard
warning button, both turn signal
indicators blink. All turn signals on
the outside of the vehicle should
flash.
56
Canadian models only
This indicator comes on when you
turn the ignition switch to the ON
(II) position with the headlight
switch off and the parking brake set.
It should go off if you turn on the
headlights or release the parking
brake. If it comes on at any other
time, it means there is a problem
with the DRL. There may also be a
problem with the high beam
headlights.
High Beam Indicator
This indicator comes on with the
high beam headlights. For more
information, see page 62 .
On Canadian models, this indicator
comes on with reduced brightness
when the daytime running lights
(DRL) are on (see page 62 ).
Low Fuel Indicator
This indicator comes on as a
reminder that you must refuel soon.
Cruise Control Indicator
If equipped
This indicator comes on when you
set the cruise control. See page
120 for information on operating the
cruise control.
When the indicator comes on, there
is about 1.6 U.S. gal (6 ) of fuel
remaining in the tank before the
needle reaches E. There is a small
reserve of fuel remaining in the tank
when the needle does reach E.
05/09/13 19:48:09 31SCV630 0062 Instrument Panel Indicators
Washer Level Indicator
Canadian models only
Tailgate and Hatch Open
Indicator
This indicator comes on if the
tailgate or the hatch is not closed
tightly.
For the first 8,000 miles (12,800 km)
after the maintenance required
indicator is reset, it will come on for
2 seconds when you turn the ignition
switch to the ON (II) position.
Door-open Indicator
This indicator comes on if any door
is not closed tightly.
Between 8,000 miles (12,800 km)
and 10,000 miles (16,000 km), this
indicator will come on for 2 seconds
when you first turn the ignition
switch to the ON (II) position, and
then flash for 10 seconds.
If you exceed 10,000 miles (16,000
km) without having the scheduled
maintenance performed, this
indicator will remain on as a constant
reminder.
Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
not done by your dealer, reset the
indicator as follows.
1. Turn off the engine.
2. Press and hold the Select/Reset
button on the instrument panel,
then turn the ignition switch to the
ON (II) position.
3. Hold the button for about 10
seconds until the indicator goes
off.
57
Instruments and Controls
This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
come on (see page 174 ).
Maintenance Required
Indicator
This indicator reminds you that it is
time to take your vehicle in for
scheduled maintenance.
Refer to the maintenance schedules
for normal and severe driving
conditions on pages 165 − 166 .
05/09/13 19:48:17 31SCV630 0063 Gauges
TACHOMETER
SPEEDOMETER
FUEL GAUGE
SELECT/RESET
BUTTON
ODOMETER/TRIP METER
TEMPERATURE GAUGE
Each trip meter works independently,
Trip Meter
This shows the number of miles (U.S.) so you can keep track of two
or kilometers (Canada) driven since
different distances.
you last reset it.
To reset a trip meter, display it, and
There are two trip meters: Trip A
then press and hold the Select/Reset
and Trip B. Switch between these
button until the number resets to
displays and the odometer by
‘‘0.0.’’ Both trip meters will reset if
pressing the Select/Reset button
the vehicle’s battery goes dead or is
repeatedly.
disconnected.
58
Odometer
The odometer shows the total
distance your vehicle has been
driven. It measures miles in U.S.
models and kilometers in Canadian
models. It is illegal under U.S.
federal law and Canadian provincial
regulations to disconnect, reset, or
alter the odometer with the intent to
change the number of miles or
kilometers indicated.
05/09/13 19:48:25 31SCV630 0064 Gauges
Avoid driving with an extremely low
f uel level. Running out of f uel could
cause the engine to misf ire, damaging
the catalytic converter.
Check Fuel Cap Indicator
(odometer/trip meter message)
If your fuel cap is loose or missing, a
‘‘CHECK FUEL CAP’’ message
appears as text in the odometer/trip
meter display after you start the
engine. Turn the engine off and
confirm the fuel cap is installed. If it
is, loosen the cap, then retighten it
until it clicks at least once. When
you restart the engine, the message
appears again. To scroll to another
message, press the select/reset
button.
If the system still detects a loose or
missing fuel cap, the malfunction
indicator lamp (MIL) comes on.
Turn the engine off, and check or
retighten the fuel cap until it clicks
at least once. The MIL goes out
after several days of normal driving
once the cap is tightened or replaced.
If it does not go out, have your dealer
inspect the vehicle. For more
information, see page 210.
Temperature Gauge
This shows the temperature of the
engine’s coolant. During normal
operation, the pointer should rise to
about the middle of the gauge. In
severe driving conditions, the pointer
may rise to the upper zone. If it
reaches the red (hot) mark, pull
safely to the side of the road. Turn to
page 207 for instructions and
precautions on checking the engine’s
cooling system.
59
Instruments and Controls
Fuel Gauge
This shows how much fuel you have.
It may show slightly more or less
than the actual amount. Driving
uphill or making turns can cause the
needle to fluctuate or the low fuel
indicator to come on early. The
needle returns to the bottom after
you turn off the ignition.
05/09/13 19:48:30 31SCV630 0065 Controls Near the Steering Wheel
HEADLIGHTS/TURN SIGNALS
(P.62)
WINDSHIELD WIPERS/WASHERS
(P.61)
SHIFT LEVER (A/T)
(P.143)
REAR WINDOW
DEFOGGER
(P.63)
HORN*
CRUISE CONTROL
MASTER BUTTON
(P.120)
A/T model is shown.
STEERING WHEEL ADJUSTMENT
(P.64)
CRUISE CONTROL BUTTONS
(P.120)
*: To use the horn, press the center pad of the steering wheel.
60
HAZARD WARNING BUTTON
(P.63)
05/09/13 19:48:41 31SCV630 0066 Windshield Wipers and Washers
Windshield Wiper
Push the right lever up or down to
select a position.
Rear Window Wiper and Washer
MIST − The wipers run at high
speed until you release the lever.
INT − The wipers operate every
few seconds.
LO − The wipers run at low speed.
HI − The wipers run at high speed.
1. MIST
2. OFF
3. INT − Intermittent
4. LO − Low speed
5. HI − High speed
6. Windshield washers
Windshield Washer − Pull the
wiper control lever toward you, and
hold it. The washers spray until you
release the lever. The wipers run at
low speed, then complete one more
sweep after you release the lever.
1. Rotate the switch clockwise to
turn the rear window wiper ON.
2. Hold past ON to turn the window
wiper on and the window washer
on.
3. OFF
4. Rotate the switch
counterclockwise to spray the
window washer without activating
the wiper.
61
Instruments and Controls
OFF − The wipers are not activated.
05/09/13 19:48:49 31SCV630 0067 Turn Signal and Headlights
Turn Signal − Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
1. Turn Signal
2. OFF
3. Parking and interior lights
4. Headlights on
5. High Beams
6. Flash high beams
Headlights − Turning switch to the
position turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to the
position turns on
the headlights. If you leave the lights
on with the key removed from the
ignition switch, you will hear a
reminder tone when you open the
driver’s door.
High Beams − Push the lever back
until you hear a click to turn on the
high beams. The blue high beam
indicator will come on (see page 56 ).
Pull the lever back again to low
beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
62
05/09/13 19:48:58 31SCV630 0068 Instrument Panel Brightness, Hazard Warning Button, Rear Window Defogger
Hazard Warning Button
Rear Window Defogger
Push the button in the speedometer
repeatedly to adjust the brightness
of the instrument panel lights. There
are six brightness levels. A segment
display shows the current brightness
level.
Push the button next to the shift
lever to turn on the hazard warning
lights (four-way flashers). This
causes all four outside turn signals
and both turn indicators in the
instrument panel to flash. Use the
hazard warning lights if you need to
park in a dangerous area near heavy
traffic, or if your vehicle is disabled.
The rear window defogger will clear
fog, frost, and thin ice from the
window. Push the defogger button to
turn it on and off. The indicator in
the button comes on to show the
defogger is on. If you do not turn it
off, the defogger will shut itself off
after about 15 minutes. It also shuts
off when you turn off the ignition
switch. You have to turn the
defogger on again when you restart
CONTINUED
the vehicle.
63
Instruments and Controls
Instrument Panel Brightness
05/09/13 19:49:06 31SCV630 0069 Rear Window Defogger, Steering Wheel Adjustment
Make sure the rear window is clear
and you have good visibility before
starting to drive.
3. Push the lever up to lock the
steering wheel in that position.
4. Make sure you have securely
locked the steering wheel in place
by trying to move it up and down.
The defogger wires on the inside of
the rear window can be accidentally
damaged. When cleaning the glass,
always wipe side-to-side.
Steering Wheel Adjustment
Make any steering wheel adjustment
before you start driving.
To adjust the steering wheel upward
or downward:
Adjusting the steering wheel
position while driving may
cause you to lose control of the
vehicle and be seriously injured
in a crash.
1. Push the lever under the left side
of the steering column all the way
down.
Adjust the steering wheel only
when the vehicle is stopped.
2. Move the steering wheel up or
down to the desired position.
Make sure you can see the
instrument panel gauges and the
indicators.
64
05/09/13 19:49:14 31SCV630 0070 Keys and Locks
KEY
NUMBER
TAG
MASTER
KEYS
(Black)
VALET
KEY
(Gray)
These keys contain electronic
circuits that are activated by the
immobilizer system. They will not
work to start the engine if the
circuits are damaged.
Some models also come with two
remote transmitters; see page 67 for
an explanation of their operation.
Instruments and Controls
Protect the keys from direct
sunlight, high temperature, and
high humidity.
Do not drop the keys or set heavy
objects on them.
The master key fits all the locks on
your vehicle. The valet key works
only in the ignition and the door
locks. You can keep the glove box
and hatch locked when you leave
your vehicle and the valet key at a
parking facility.
Keep the keys away from liquids.
If they get wet, dry them
immediately with a soft cloth.
The keys do not contain batteries.
Do not try to take them apart.
You should have received a key
number tag with your set of keys.
You will need this key number if you
ever have to get a key replaced. Use
only Honda-approved key blanks.
65
05/09/13 19:49:21 31SCV630 0071 Immobilizer System
The immobilizer system protects
your vehicle from theft. If an
improperly-coded key (or other
device) is used, the engine will not
start.
When you turn the ignition switch to
the ON (II) position, the immobilizer
system indicator should come on for
a few seconds, then go off. If the
indicator starts to blink, it means the
system does not recognize the
coding of the key. Turn the ignition
switch to the LOCK (0) position,
remove the key, reinsert it, and turn
the ignition switch to the ON (II)
position again.
The system may not recognize your
key’s coding if another immobilizer
key or other metal object (i.e. key
fob) is near the ignition switch when
you insert the key.
66
If the system repeatedly does not
recognize the coding of your key,
contact your dealer.
Do not attempt to alter this system
or add other devices to it. Electrical
problems could result that may make
your vehicle undrivable.
If you have lost your key and cannot
start your engine, contact your
dealer.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
05/09/13 19:49:29 31SCV630 0072 Remote Transmitter
LED
LOCK
BUTTON
PANIC
BUTTON
On EX models
LOCK − Press this button once to
lock both doors and hatch. Some
exterior lights will flash. When you
push LOCK twice within 5 seconds,
you will hear a beep to verify that the
doors are locked. You cannot lock it
if any door is not fully closed or key
is in the ignition switch.
PANIC − Press this button for
about 1 second to attract attention;
the horn will sound and the exterior
lights will flash for about 30 seconds.
To cancel panic mode, press any
other button on the remote
transmitter, or turn the ignition
switch to the ON (II) position.
Remote Transmitter Care
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.
67
Instruments and Controls
UNLOCK
BUTTON
UNLOCK − Press this button once
to unlock the driver’s door. Push it
twice to unlock the passenger’s door
and the hatch. Some exterior lights
will flash twice each time you press
the button. If you do not open either
door or the hatch within 30 seconds,
they will automatically relock.
05/09/13 19:49:37 31SCV630 0073 Remote Transmitter
Replacing the Transmitter
Battery
ROUND
COVER
CUSHION
RING
BATTERY
If it takes several pushes on the
button to lock or unlock the doors
and the hatch, replace the battery as
soon as possible.
Battery type: CR2025
68
To replace the battery, remove the
round cover on the back of the
transmitter by turning it
counterclockwise with a coin. Insert
a new battery with the + side facing
up, and reinstall the cushion ring.
Align the ▽ mark on the cover
with the ◎ mark on the
transmitter. Set the cover in place
and turn it clockwise.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
05/09/13 19:49:44 31SCV630 0074 Ignition Switch
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
LOCK (0) − You can insert or
remove the key only in this position.
To turn the key, push it in slightly. If
your vehicle has an automatic
transmission, the shift lever must
also be in park.
ON (II) − This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
START (III) − Use this position
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
If your vehicle has an automatic
transmission, the shift lever must be
in Park before you can remove the
key from the ignition switch.
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control of the
vehicle.
Remove the key from the
ignition switch only when
parked.
69
Instruments and Controls
ACCESSORY (I) − You can
operate the audio system and the
accessory power sockets in this
position.
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver’s door. Remove the key to
turn off the beeper.
05/09/13 19:49:53 31SCV630 0075 Door Locks
Power Door Locks
DOOR LOCK SWITCH
The lock tab on the passenger’s door
locks and unlocks only that door.
Pulling up on the driver’s door lock
tab only unlocks the driver’s door.
Rear Doors
To lock the driver’s door, remove the
key from the ignition switch, pull the
outside door handle and push the
lock tab down or push the door lock
switch down. Release the handle,
then close the door.
LOCK TAB
To lock all of the doors and hatch,
press the door lock switch on either
front door, or press the lock tab
down on the driver’s door, or use the
key on the outside lock.
Pressing up on the door lock switch
will unlock all of the doors and the
hatch.
70
To unlock the driver’s door from the
outside, turn the key and release it.
To open the rear door, pull the rear
door handle located in the rear door
edge. The rear door can be opened
only when the front door is open.
To close the doors, close the rear
door first, then the front door. The
front door cannot be latched without
first closing the rear door. Closing
the rear door on the front door will
damage both doors.
05/09/13 19:50:00 31SCV630 0076 Door Locks
Lock the hatch by pushing down
the lock tab on the driver’s door
(see page 70 ), or by using the
master key in the driver’s door
lock.
Hatch
Lock or unlock the hatch with the
master door lock switch.
UNLOCK
To lock or unlock the hatch.
Use your master key to lock and
unlock the hatch. Turn the key
clockwise to lock the hatch, and
counterclockwise to unlock it.
With the hatch unlocked, open it by
pulling the handle and lifting up.
To close the hatch, lower it, then
press down on the back edge.
When both the hatch and tailgate are
open, the hatch cannot be latched
without first closing the tailgate.
71
Instruments and Controls
LOCK
05/09/13 19:50:06 31SCV630 0077 Door Locks
Tailgate
You can open the tailgate only when
the hatch is open. To open the
tailgate, slide the lock lever to the
left and swing down the tailgate. To
close the tailgate, lift it up and push
it firmly until it latches.
Before closing the tailgate, make
sure the hatch is raised. Closing the
tailgate on the lowered hatch can
damage the hatch and the tailgate.
72
See page 132 for information on
cargo loading. Keep the tailgate and
the hatch closed at all times while
driving to avoid damaging them, and
to prevent exhaust gas from getting
into the interior. See Carbon
Monoxide Hazard on page 47 .
05/09/13 19:50:13 31SCV630 0078 Seats
Seat Adjustments
Front Seat
See pages 12 − 14 for important safety
information and warnings about how to
properly position seats and seat-backs.
To adjust the seat forward and
backward, pull up on the bar under
the seat cushion’s front edge. Try to
move the seat to make sure it is
locked in position.
To change the seat-back angle of the
front seat, pull up on the lever on the
outside of the seat bottom. Adjust
the seat-back and make sure it locks
into position.
73
Instruments and Controls
Make all seat adjustments before
you start driving.
05/09/13 19:50:21 31SCV630 0079 Seats
Driver’s Seat Height Adjustment
Front Seat Armrests
Rear Seat
SEAT-BACK ADJUSTMENT STRAP
To adjust the height of the driver’s
seat, turn the dial on the outside of
the seat bottom.
74
On EX models
Each front seat has an armrest on
the side of the seat-back. To use it,
pivot it down.
To change the angle of the rear seatback, pull the strap at the inside
edge of the seat cushion, make sure
the seat-back locks into position.
05/09/13 19:50:29 31SCV630 0080 Seats
Head Restraints
See page 15 for important safety
information and a warning about how to
properly position the head restraints.
They are most effective when you
adjust them so the back of the
occupant’s head rests against the
center of the restraint.
Rear Seat Access
RELEASE LEVER
RELEASE BUTTON
Your vehicle is equipped with head
restraints in all seating positions to
help protect you and your
passengers from whiplash and other
injuries.
The rear seat passengers can get out
through the passenger’s door. Push
down on the release lever at the base
of the front passenger’s seat-back,
and push the seat-back forward. The
seat-back will tilt forward and the
entire seat will move forward.
Make sure the seat is upright and
fully latched before sitting in it.
75
Instruments and Controls
The head restraints in the front and
rear seating positions adjust for
height. You need both hands to
adjust the restraint. To raise it, pull
upward. To lower the restraint, push
the release button sideways and
push the restraint down.
05/09/13 19:50:36 31SCV630 0081 Seats
2. Adjust the front seats forward as
far as they will go. Pull up the seatback angle adjustment lever and
pivot the seat-back backward until
it is level with the rear seat
cushion.
Reclining the Front Seats
3. Move the front seat backward
until it touches the rear seat.
4. Adjust the rear seat-back to the
desired position.
You can recline the seat-backs on the
front seats so they are level with the
rear seat cushions, making a large
cushioned area. To do this:
1. Remove the head restraints from
the front seats (see page 75 ), and
store them in the side pockets of
the cargo area.
Reverse this procedure to return the
front and rear seats to the upright
position. Make sure you install the
head restraints and the seats are
locked securely before driving.
When you return the seat-back to
the upright position, hold the seatback to keep it from going up too
quickly.
76
05/09/13 19:50:44 31SCV630 0082 Seats
Folding the Rear Seats
To create more cargo space, you can
fold up each rear seat to each side
wall separately.
SEAT-BACK ADJUSTMENT STRAP
RELEASE STRAP
2. Pull the seat-back adjustment
strap at the inside edge of the seat
cushion and push the seat-back
backward as far as it will go.
3. Pull the release strap on the seat
support, and pivot the seat toward
the vehicle’s side wall.
CONTINUED
77
Instruments and Controls
1. Lower the head restraint to its
lowest position.
05/09/13 19:50:49 31SCV630 0083 Seats
GRAB RAIL
SEAT SUPPORT
FASTENING STRAP
4. A fastening strap is attached to the
inside of the seat cushion. While
pushing the seat up and toward
the side wall, hook the fastening
strap to the grab rail.
78
5. Fold down the seat support.
Reverse this procedure to return the
rear seat to the upright position.
When not in use, store the fastening
strap hook in the fabric pocket on
the bottom of the seat cushion.
Make sure the seat is locked
securely.
05/09/13 19:50:57 31SCV630 0084 Seats
Removing the Rear Seats
TAB
Both seats can be removed to give
more cargo capacity. To remove a
seat:
STEEL HANDLE
Instruments and Controls
RELEASE STRAP
LOCK LEVER
COVER
2. Remove the cover between the
seat cushion and the side wall by
pulling the tab and pulling the
cover straight up.
3. Push the lock lever forward to
unlock the seat.
1. Pull the release strap on the seat
support to unlock the seat support.
CONTINUED
79
05/09/13 19:51:02 31SCV630 0085 Seats
Reverse this procedure to reinstall
the seat. Make sure the seat is
securely locked.
STEEL HANDLE
Always remove an unsecured seat
from the vehicle before driving. A
seat that is not locked in place could
be thrown about and cause injury in
a sudden stop or crash.
HANDLE STRAP
4. Hold the steel handle next to the
lock lever and the handle strap at
the outside edge of the seat
cushion, and remove the entire
seat by pulling it up and backward.
80
05/09/13 19:51:10 31SCV630 0086 Power Windows
DRIVER’S WINDOW SWITCH
Closing a power window on
someone’s hands or fingers can
cause serious injury.
MAIN SWITCH
Turn the ignition switch to the ON
(II) position to raise or lower either
window. To open the window, push
the switch down and hold it. Release
the switch when you want the
window to stop. Pull back on the
switch and hold it to close the
window.
AUTO − To open/close the driver’s
window, push the window switch
firmly down or up to the second
detent, and release it. The window
will automatically go up or down all
the way. To stop the window, pull/
push on the window switch briefly.
If the MAIN switch is OFF, the
passenger’s window cannot be raised
or lowered. Keep the MAIN switch
off when you have children in the
vehicle so they do not injure
themselves by operating the
passenger’s window unintentionally.
1. Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.
2. Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for about 2 seconds.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
81
Instruments and Controls
Make sure your passenger is
away from the window before
closing it.
AUTO REVERSE − If the driver’s
window senses any obstacle while it
is closing automatically, it will
reverse direction, and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
If your vehicle’s battery is
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO function will be disabled. The
power window system needs to be
reset after reconnecting the battery
or installing the fuse.
05/09/13 19:51:17 31SCV630 0087 Mirrors
Adjusting the Power Mirrors
SELECTOR SWITCH
2. Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
3. When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
TAB
Keep the inside and outside mirrors
clean and adjusted for best visibility.
Be sure to adjust the mirrors before
you start driving.
The inside mirror has day and night
positions. The night position reduces
glare from headlights behind you.
Flip the tab on the bottom edge of
the mirror to select the day or night
position.
82
ADJUSTMENT SWITCH
1. Move the selector switch to L
(driver’s side) or R (passenger’s
side).
05/09/13 19:51:27 31SCV630 0088 Rear Windows, Parking Brake, Skylight
Rear Windows
Parking Brake
Skylight
PARKING BRAKE LEVER
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page 54 ).
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles.
Instruments and Controls
To open a rear window, pull the lever
towards you, then push it out until it
locks. To close the rear window pull
the lever towards you, then push it
back. Make sure the window is fully
closed and locked.
If equipped
To lift up the rear of the skylight for
ventilation, pull down the lever to
unlock the skylight, then push it up
until the skylight is locked in the tiltup position.
To close the skylight, pull down the
lever to unlock the skylight, then
push it back in place. Make sure the
skylight is fully closed and locked.
CONTINUED
83
05/09/13 19:51:33 31SCV630 0089 Skylight
If you try to tilt up the skylight in
below-f reezing temperatures, or when
it is covered with snow or ice, you can
damage it.
Bef ore lif ting the skylight, make sure
the roof of the vehicle is dry. Rain or
remaining water af ter car-washing may
get into the f rame of the skylight. In
winter, remove the buildup of snow on
the roof .
To remove the skylight:
Turn off the engine, and set the
parking brake. Then pull down the
lever, squeeze both sides of the pivot
while pushing up the red tab in the
lever, and pull the lever assembly
away from the ceiling.
Push up the rear of the skylight.
Standing on the tailgate with the
hatch down, hold both sides of the
skylight and pull it toward you to
remove it from the vehicle roof.
The maximum weight on the tailgate is
440 lbs (200 kg).
84
05/09/13 19:51:38 31SCV630 0090 Skylight
An unsecured skylight can be
thrown about and cause serious
injury in a sudden stop or crash.
With the rear seats in their upright
position, store the skylight, face
down in its bag in the cargo area.
Secure the bag with four hooks on
the cargo area floor. Do not store
anything on top of the skylight.
To reinstall the skylight, make sure
the air deflector is pushed down.
When reinstalling the lever assembly,
push in both red pivots, and align
with the receptacle holes. Let the
pivots move out until they rest in the
holes securely. Make sure the
skylight is fully closed and latched.
85
Instruments and Controls
Make sure to store the skylight
in its bag, and secure the bag to
the hooks on the cargo area
floor.
05/09/13 19:51:43 31SCV630 0091 Interior Convenience Items
CARGO AREA
CARGO AREA
SIDE POCKET
COIN TRAY
CEILING POCKET*
VANITY MIRROR*
DOOR POCKETS
RADIO POCKET*
ACCESSORY
POWER
SOCKET
GLOVE BOX
CENTER LOWER POCKET*
BEVERAGE HOLDERS
SEAT-BACK POCKET*
* : If equipped
86
BUNGEE CORDS*
05/09/13 19:51:50 31SCV630 0092 Interior Convenience Items
Accessory Power Sockets
Your vehicle has one or two
accessory power sockets, depending
on the model. All models have a
front accessory power socket on the
dashboard above the glove box.
The EX model has another
accessory power socket in the cargo
area on the passenger’s side.
These sockets are intended to supply
power for 12 volt DC accessories
that are rated 120 watts or less (10
amps).
None of the sockets will power an
automotive type cigarette lighter
element. When more than one
socket is being used, the combined
power rating of the accessories
should be 120 watts or less
(10 amps).
Glove Box
Open the glove box by pulling the
bottom of the handle. Close it with a
firm push. Lock or unlock the glove
box with the master key.
An open glove box can cause
serious injury to your passenger
in a crash, even if the
passenger is wearing the seat
belt.
Always keep the glove box
closed while driving.
87
Instruments and Controls
Beverage Holders
Be careful when you are using the
beverage holders. A spilled liquid
that is very hot can scald you or your
passengers. Spilled liquids can also
damage the upholstery, and
electrical components in the interior.
05/09/13 19:51:58 31SCV630 0093 Interior Lights
Ceiling Light
Cargo Area Light
The cargo area light has a threeposition switch. In the center
position, the light comes on when
you open the hatch.
ON
OFF
DOOR ACTIVATED
The ceiling light has a three-position
switch: ON, Door Activated, and
OFF.
In the Door Activated (center)
position, the light comes on when
you:
Open any door.
Remove the key from the ignition.
If you do not open a door, the light
fades out in about 30 seconds.
Unlock the doors with the key or
remote transmitter.
88
Spotlights
On U.S. EX models and Canadian Y
package
Turn on the spotlight by pushing the
lens. Push the lens again to turn it
off. You can use the spotlights at all
times.
Ignition Switch Light
The ignition switch light comes on
when you unlock the driver’s door,
and fades out about 30 seconds after
you close the door.
05/09/13 19:52:02 31SCV630 0094 Features
The heating and air conditioning
system in your vehicle provides a
comfortable driving environment in
all weather conditions.
Your vehicle has an anti-theft audio
system that requires a code number
to enable it.
89
Features
The standard audio system has
many features. This section
describes those features and how to
use them. (If you have an optional
audio system, refer to the operating
instructions that came with it.)
Vents, Heating, and A/C ................ 90
Air Flow Controls ........................ 91
Ventilation .................................... 92
Using the Heater ......................... 92
Using the A/C .............................. 92
Dehumidify the Interior .............. 93
To Defog and Defrost ................. 93
To Remove Exterior Frost
or Ice From the Windows ....... 93
Playing the AM/FM Radio ............. 94
AM/FM Radio Reception ............... 98
Playing the XM
Satellite Radio ............................ 100
Playing a Disc ................................. 106
Protecting Your Discs ................... 113
Disc Player Error Messages ........ 114
Disc Changer Error Messages .... 115
Radio Theft Protection.................. 116
Setting the Clock ........................... 117
Remote Audio Controls................. 119
Cruise Control ................................ 120
05/09/13 19:52:06 31SCV630 0095 Vents, Heating, and A/C
FAN CONTROL DIAL
TEMPERATURE
CONTROL DIAL
MODE CONTROL DIAL
DEFROST POSITION
RECIRCULATION BUTTON
AIR CONDITIONING
(A/C) BUTTON
REAR WINDOW DEFOGGER
BUTTON
MAX A/C POSITION
90
05/09/13 19:52:24 31SCV630 0096 Vents, Heating, and A/C
Air Flow Controls
Fan Control Dial
Turn this dial clockwise to increase
the fan speed and airflow.
Air Conditioning (A/C) Button
This button turns the air
conditioning on and off. The
indicator in the button is on when
the A/C is on.
Recirculation Button
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
Rear Window Defogger Button
This button turns the rear window
defogger off and on (see page 63 ).
Mode Control Dial
Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.
The system automatically
turns on the A/C and
switches to recirculation mode. Air
flows from the center and side vents
in the dashboard.
Air flows from the center
and corner vents in the dashboard.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the floor
vents. When you select
, the
system automatically switches to
fresh air mode.
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
CONTINUED
91
Features
Temperature Control Dial
Turning this dial clockwise increases
the temperature of the airflow.
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
05/09/13 19:52:36 31SCV630 0097 Vents, Heating, and A/C
Air flows from the defroster
vents at the base of the windshield.
When you select
or
,
the system automatically switches to
fresh air mode and turns on the A/C.
The A/C indicator does not come on.
Ventilation
(fresh air mode)
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the tailgate.
1. Turn the temperature control dial
all the way to the left.
2. Make sure the A/C is off.
and fresh air mode.
3. Select
4. Set the fan to the desired speed.
92
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
and fresh air mode.
1. Select
2. Set the fan to the desired speed.
3. Adjust the warmth of the air with
the temperature control dial.
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
59 ). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
1. Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
2. Make sure the temperature
control dial is all the way to the left.
.
3. Select
4. If the outside air is humid, select
recirculation mode. If the outside
air is dry, select fresh air mode.
5. Set the fan to the desired speed.
If the interior is very warm, you can
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in Fresh Air mode.
To cool the interior with MAX A/C:
1. Set the mode control dial to MAX
A/C.
The system automatically turns on
the A/C, selects
and
switches to recirculation mode.
2. Make sure the temperature
control dial is all the way to the left.
3. Set the fan to the desired speed.
05/09/13 19:52:46 31SCV630 0098 Vents, Heating, and A/C
Dehumidify the Interior
Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
1. Set the fan to the desired speed, or
high for faster defrosting.
. The system
2. Select
automatically switches to fresh air
mode and turns on the A/C. (The
A/C indicator will not come on in
U.S. vehicles, if the A/C was off to
start with)
3. Adjust the temperature control
dial so the airflow feels warm.
to help clear the
4. Select
rear window.
5. To increase airflow to the
windshield, close the corner vents.
When you switch to another mode
from
, the A/C turns off. But
if it was on to start with, it stays on.
To Remove Exterior Frost or Ice
From the Windows
. The system
1. Select
automatically switches to fresh air
mode and turns on the A/C. The
A/C indicator does not come on
(U.S. vehicles) if the A/C was off
to begin with.
.
2. Select
3. Set the fan and temperature
controls to maximum level.
to help clear the
4. Select
rear window.
To clear the windows faster, you can
close the dashboard corner vents by
rotating the wheel below each vent.
This sends more warm air to the
windshield defroster vents. Once the
windshield is clear, select fresh air
mode to avoid fogging the windows.
For your safety, make sure you have
a clear view through all the windows
before driving.
93
Features
1. Switch the fan on.
2. Turn on the air conditioning.
and fresh air mode.
3. Select
4. Adjust the temperature control
dial to your preference.
To Defog and Defrost
To remove fog from the inside of the
windows:
05/09/13 19:52:51 31SCV630 0099 Playing the AM/FM Radio
Canadian Y package
U.S. LX and Canadian Base models
STEREO INDICATOR
AUTO SELECT
AM/FM
BUTTON
BUTTON
SEEK BUTTONS
PWR/VOL KNOB
AM/FM BUTTON
STEREO INDICATOR
SCAN BUTTON
SCAN INDICATOR
PWR/VOL
KNOB
SEEK BAR
94
TUNE KNOB
PRESET BUTTONS
AUTO SELECT
BUTTON
SCAN BUTTON
PRESET BUTTONS
TUNE KNOB
05/09/13 19:52:56 31SCV630 0100 Playing the AM/FM Radio
U.S. EX models
PWR/VOL KNOB
STEREO INDICATOR
SEEK BUTTONS
Features
AM/FM
BUTTON
AUTO SELECT
BUTTON
SCAN BUTTON
PRESET BUTTONS
TUNE KNOB
95
05/09/13 19:53:06 31SCV630 0101 Playing the AM/FM Radio
To Play the Radio
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Turn the system on by
pushing the PWR/VOL knob or the
AM/FM button. Adjust the volume
by turning the same knob.
lower frequency.
seconds (U.S. EX and Canadian Y
package models). When it plays a
station you want to listen to, press
the SCAN button again.
SEEK − The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press either (
or
), then
release it.
Preset − Each preset button can
store one frequency on AM and two
frequencies on FM.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, the
preset buttons, and AUTO SELECT .
SCAN − The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds (U.S. LX and
Canadian base models) or 10
seconds (U.S. EX and Canadian Y
package models).
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
TUNE − Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a
If you do nothing, the system will
then scan for the next strong station
and play it for 5 seconds (U.S. LX
and Canadian base models) or 10
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the FM/AM
button. On the FM band, ST will be
displayed if the station is broadcasting in stereo. Stereo reproduction on
AM is not available.
96
05/09/13 19:53:13 31SCV630 0102 Playing the AM/FM Radio
AUTO SELECT − If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
Adjusting the Sound
Press the MODE or SOUND knob
repeatedly to display the bass (BAS),
treble (TRE), balance (BAL), fader
(FAD), and sub-woofer (SUB-W)
settings.
Balance/Fader − These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Treble/Bass/Sub-Woofer − Use
the TRE/BAS/SUB-W modes to
adjust the tone to your liking.
Each mode is shown in the display as
it changes. Turn the MODE or
SOUND knob to adjust the setting to
your liking. When the level reaches
the center, you will see ‘‘C’’ in the
display. The system will
automatically return the display to
the selected audio mode about 5
seconds after you stop adjusting a
mode.
97
Features
Press the A. SEL button. ‘‘A. SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
To turn off auto select, press the
A. SEL button. This restores the
presets you originally set.
05/09/14 11:38:56 31SCV630 0103 AM/FM Radio Reception
Radio Frequencies
The radio can receive the complete
AM and FM bands.
Those bands cover these frequencies:
AM band: 530 to 1,710 kHz
FM band: 87.7 to 107.9 MHz
Radio stations on the AM band are
assigned frequencies at least 10 kHz
apart (530, 540, 550). Stations on the
FM band are assigned frequencies at
least 0.2 MHz apart (87.9, 88.1, 88.3).
Stations must use these exact
frequencies. It is fairly common for
stations to round-off the frequency in
their advertising, so your radio could
display a frequency of 100.9 even
though the announcer may identify
the station as ‘‘FM101.’’
98
Radio Reception
How well the radio receives stations
is dependent on many factors, such
as the distance from the station’s
transmitter, nearby large objects,
and atmospheric conditions.
A radio station’s signal gets weaker
as you get farther away from its
transmitter. If you are listening to an
AM station, you will notice the sound
volume becoming weaker, and the
station drifting in and out. If you are
listening to an FM station, you will
see the stereo indicator flickering off
and on as the signal weakens.
Eventually, the stereo indicator will
go off and the sound will fade
completely as you get out of range of
the station’s signal.
Driving very near the transmitter of
a station that is broadcasting on a
frequency close to the frequency of
the station you are listening to can
also affect your radio’s reception.
You may temporarily hear both
stations, or hear only the station you
are close to.
05/09/13 19:53:28 31SCV630 0104 AM/FM Radio Reception
As required by the FCC:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
Features
Radio signals, especially on the FM
band, are deflected by large objects
such as buildings and hills. Your
radio then receives both the direct
signal from the station’s transmitter,
and the deflected signal. This causes
the sound to distort or flutter. This is
a main cause of poor radio reception
in city driving.
Radio reception can be affected by
atmospheric conditions such as
thunderstorms, high humidity, and
even sunspots. You may be able to
receive a distant radio station one
day and not receive it the next day
because of a change in conditions.
Electrical interference from passing
vehicles and stationary sources can
cause temporary reception problems.
99
05/09/13 19:53:34 31SCV630 0105 Playing the XM Satellite Radio
XM Satellite Radio
U.S. EX models
Your vehicle is capable of receiving
XM Satellite Radio anywhere in the
United States, except Hawaii and
Alaska.
XM is a registered trademark of
XM Satellite Radio, Inc.
CHANNEL
INDICATOR
PWR/VOL
KNOB
CATEGORY INDICATOR
XM BUTTON
DISPLAY/MODE BUTTON
Satellite radio is only available on U.S.
models.
TUNE
KNOB
CATEGORY
BUTTONS
SCAN
BUTTON
PRESET
BUTTONS
100
05/09/13 19:53:42 31SCV630 0106 Playing the XM Satellite Radio
Operating the Satellite Radio
To listen to XM radio, turn the
ignition switch to the ACCESSORY
(I) or the ON (II) position. Push the
PWR/VOL knob to turn on the audio
system, and press the ‘‘XM’’ button.
Adjust the volume by turning the
PWR/VOL knob. The last channel
you listened to will show in the
display.
MODE − To switch between
channel mode and category mode,
press and hold the DISP/MODE
button until the mode changes.
In the channel mode, you can select
all of the available channels. In the
category mode, such as Jazz, Rock,
Classical, etc., you can select all of
the channels within that category.
Each time you press and release the
DISP/MODE button, the display
changes in the following sequence:
channel name, channel number,
category, artist name, and music title.
You may experience periods when
XM Radio does not transmit the
artist’s name and song title
information. If this happens, there is
nothing wrong with your system.
TUNE − Turn the TUNE knob left
or right to select channels. In the
category mode, you can only select
channels within that category.
CATEGORY (
or
) − In
the category mode, press either
button to select another category.
CONTINUED
101
Features
XM radio receives signals from two
satellites to produce clear, highquality digital reception. It offers
many channels in several categories.
Along with a large selection of
different types of music, XM radio
allows you to view channel and
category selections in the display.
05/09/13 19:53:50 31SCV630 0107 Playing the XM Satellite Radio
SCAN − The scan function gives
you sampling of all channels while in
the channel mode. In the category
mode, only the stations within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order for 5 seconds, then
selects the next channel. When you
hear a channel you want to continue
listening to, press the button.
Preset − You can store up to 12
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the XM button. Either XM1
or XM2 will show in the display.
2. Use the TUNE knob, or the
CATEGORY or SCAN buttons to
tune to a desired channel.
In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.
3. Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
4. Repeat steps 2 and 3 to store the
first six channels.
102
5. Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, press and
release the proper preset button to
tune to it.
05/09/13 19:53:56 31SCV630 0108 Playing the XM Satellite Radio
XM Radio Display Messages
‘‘LOADING’’ − XM is loading the
audio or program
information.
‘‘UPDATING’’ − The encryption
code is being
updated. Wait
until the
encryption code is
fully updated.
Channels 0 and 1
should still work
normally.
Features
‘‘OFF AIR’’ − The channel
currently selected is
no longer
broadcasting.
‘‘NO SIGNAL’’ − The signal is
currently too
weak. Move the
vehicle to an area
away from tall
buildings, and
with an
unobstructed view
of the southern
horizon.
‘‘ - - - - ’’ − The selected channel
number does not exist or
is not part of your
subscription, or this
channel has no artist or
title information at this
time.
‘‘ANTENNA’’ − There is a problem
with the XM
antenna. Please
consult your
dealer.
103
05/09/13 19:54:00 31SCV630 0109 Playing the XM Satellite Radio
The XM satellites are in orbit over
the equator; therefore, objects south
of the vehicle may cause satellite
reception interruptions. To help
compensate for this, ground-based
repeaters are placed in major
metropolitan areas.
Satellite signals are more likely to be
blocked by tall buildings and
mountains the farther north you
travel from the equator. Carrying
large items on a roof rack can also
block the signal.
Signal may be
blocked by
mountains or
large obstacles
to the south.
SATELLITE
GROUND
REPEATER
104
05/09/13 19:54:11 31SCV630 0110 Playing the XM Satellite Radio
Depending on where you drive, you
may experience reception problems.
Interference can be caused by any of
these conditions:
There may be other geographic
situations that could affect XM radio
reception.
Receiving Satellite Radio Service
If your XM Radio service has expired
or you purchased your vehicle from
a previous owner, you can listen to a
sampling of the broadcasts available
on XM Satellite Radio. With the
ignition switch in the ACCESSORY
(I) or ON (II) position, push the
PWR/VOL knob to turn on the audio
system and press the XM button. A
variety of music types and styles will
play.
If you decide to purchase XM
satellite radio service, contact XM
Radio at www.xmradio.com, or at
1-800-852-9696. You will need to give
them your radio I.D. number and
your credit card number. To get your
radio I.D. number, turn the TUNE
knob until ‘‘0’’ appears in the display.
Your I.D. will appear in the display.
After you have registered with XM
Radio, keep your audio system in the
satellite radio mode while you wait
for activation. This should take about
30 minutes.
While waiting for activation, make
sure your vehicle remains in an open
area with good reception. Once your
audio system is activated, you’ll be
able to listen to XM radio broadcasts.
XM Radio will continue to send an
activation signal to your vehicle for
at least 12 hours from the activation
request. If the service has not been
activated after 36 hours, contact XM
Radio.
105
Features
Driving on the north side of an
east/west mountain road.
Driving on the north side of a
large commercial truck on an
east/west road.
Driving in tunnels.
Driving on a road beside a vertical
wall, steep cliff, or hill to the south
of you.
Driving on the lower level of a
multi-tiered road.
Driving on a single lane road
alongside dense trees taller than
50 ft. (15 m) to the south of you.
Large items carried on a roof rack.
As required by the FCC:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
05/09/13 19:54:16 31SCV630 0111 Playing a Disc
U.S. LX and Canadian base models
CD BUTTON
Canadian Y package
CD SLOT
EJECT BUTTON
CD
BUTTON
FOLDER
INDICATOR
EJECT BUTTON
RANDOM INDICATOR
CD SLOT
DISPLAY BUTTON
REPEAT INDICATOR
PWR/VOL
KNOB
RANDOM INDICATOR
SEEK/SKIP BAR
RANDOM BUTTON
REPEAT
BUTTON
SCAN
BUTTON
PWR/VOL KNOB
DISC INDICATOR
106
SKIP BUTTONS
RANDOM BUTTON
FOLDER KNOB
05/09/13 19:54:21 31SCV630 0112 Playing a Disc
U.S. EX models
EJECT BUTTON
FOLDER INDICATOR
RANDOM INDICATOR
CD SLOT
Features
DISC INDICATOR
DISPLAY BUTTON
CD BUTTON
FOLDER KNOB
REPEAT
BUTTON
SCAN
BUTTON
PWR/VOL KNOB
SKIP BUTTONS
RANDOM BUTTON
107
05/09/13 19:54:29 31SCV630 0113 Playing a Disc
To Play a Disc
To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
You operate the disc player with the
same controls used for the radio. To
select the disc player, press the CD/
AUX button. You will see ‘‘CD’’ in the
display. The number of the track
playing is shown in the display. The
system will continuously play a disc
until you change modes.
On U.S. EX models and Canadian Y
package
The disc player can also play CD-Rs
WMA files, and CD-RWs
compressed in MP3 standard. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. You can select
up to 255 folders or tracks.
Note:
Because the compressed audio
format of MP3 and WMA discs
allows them to store large
amounts of files and tagging
information, these discs may take
more time to begin playing.
The sound quality of MP3 and
WMA discs generally degrades as
the bit rate increases.
If a file on an MP3 or WMA disc is
protected by digital rights
management (DRM), the audio
unit displays FORMAT, and then
skips to the next file.
108
Video CDs and DVDs will not work
in this unit.
The specifications of the compatible
MP3 file are:
Sampling frequency: 32/44.1/48 kHz
Bit rate: 8/16/24/32/40/48/56/64/
80/96/112/128/160/192/224/256/
320 kbps
Compatible with variable bit rate and
multi-session.
Maximum layers (including ROOT):
8
05/09/13 19:54:37 31SCV630 0114 Playing a Disc
Insert a disc into the slot. The drive
will pull the disc in the rest of the
way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.
To play the radio when a disc is
playing, press the AM/FM button.
Press the CD/AUX button again to
switch back to the disc player.
If you press the DISP/MODE button
while playing a disc, additional
information (track, album, artist, etc.)
may be displayed.
SEEK/SKIP − Each time you
press and release the
, the
player skips forward to the
beginning of the next track (files in
MP3/WMA mode). Press and
release the
to skip backward to
the beginning of the current track.
Press it again to skip to the
beginning of the previous track.
To move rapidly within a track, press
and hold
or
.
To Change or Select Tracks/Files
Except EX models
Use the SEEK/SKIP button while a
disc is playing to select passages and
change tracks (files in MP3/WMA
mode).
You will see CUE or REW in the
display while moving within a track.
In MP3/WMA mode, use the
FOLDER knob to select folders in
the disc, and use the SEEK/SKIP
button to change files.
CONTINUED
109
Features
You can also play 3-inch (8-cm) discs
without using an adapter ring.
If you turn the system off while a
disc is playing, either with the PWR/
VOL knob or by turning off the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the disc will begin playing
where it left off.
05/09/13 19:54:43 31SCV630 0115 Playing a Disc
On U.S. EX models and Canadian Y
package
REPEAT (TRACK/FILE
REPEAT) − To continuously replay
a track (files in MP3/WMA mode),
press and release the RPT button.
You will see RPT in the display.
Press the RPT button again to turn it
off.
In MP3/WMA mode
FOLDER SELECTION − To
select a different folder, use the
FOLDER knob to move to the
beginning of the next folder. Turn
the knob right to move to the
beginning of the current folder. Turn
the knob left to skip to the beginning
of the previous folder.
110
FOLDER-REPEAT − This feature,
when activated, replays all the files
on the selected folder in the order
they are compressed in MP3/WMA.
To activate folder repeat, press and
hold the RPT button for 2 seconds.
You will see
RPT in the
display. The system continuously
replays the current folder. Press and
hold the RPT button for 2 seconds to
turn it off.
RANDOM (Random within a
Disc) − This feature plays the
tracks (all files in each folder in
MP3/WMA mode) within a disc in
random order. To activate random
play, press and release the RDM
button. You will see RDM in the
display. Press the RDM button again
to return to normal play.
FOLDER-RANDOM − This
feature, when activated, plays the
files within a folder in random order,
rather than in the order they are
compressed in MP3/WMA. To
activate folder random play, press
and hold the RDM button. You will
see
RDM in the display. The
system will then select and play files
randomly. This continues until you
deactivate folder random play by
pressing the RDM button again or
selecting a different folder with the
FOLDER knob.
05/09/13 19:54:51 31SCV630 0116 Playing a Disc
Pressing either side of the SEEK/
SKIP button also turns off scan.
FOLDER SCAN − This feature,
when activated, samples all files on
the selected folder in order. To
activate folder scan, press and hold
the SCAN button until you hear a
beep. You will see
SCAN in
the display. The system will then
play the first file for about 10
seconds. If you do nothing, the
system will then play the first file in
each folder for 10 seconds. When it
plays a file you want to continue
listening to, press the SCAN button
again.
Pressing either side of the SEEK/
SKIP button or selecting a different
folder with the FOLDER knob also
turns off folder scan.
To Stop Playing a Disc
Press the eject button (
) to
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
the disc after 15 seconds and put it in
pause mode. To begin playing, press
the CD/AUX button.
Press the AM/FM button to switch
to the radio while a disc is playing.
To play the disc, press the CD button.
If you turn the system off while a
disc is playing, either with the PWR/
VOL knob or by turning off the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the disc will begin playing
where it left off.
111
Features
SCAN − The scan function samples
all tracks/files on the selected disc in
the order they are recorded. To
activate scan, press and hold the
SCAN button until you hear a beep.
You will see SCAN in the display.
You will get a 10 second sampling of
each track/file on the selected disc.
Press the SCAN button again to exit
scan and play the last track/file
sampled.
05/09/13 19:55:00 31SCV630 0117 Playing a Disc
Auxiliary Input Jack
If equipped
The auxiliary input jack is on the
dashboard next to the accessory
power socket. The system will accept
auxiliary input from standard audio
accessories.
When the accessory is connected to
the auxiliary input jack, press the
AUX button to select it.
Audio System Malfunction
See pages 114 and 115 for
information on error messages.
Protecting Discs
For information on how to handle
and protect discs, see page 113 .
112
Operating the Optional Disc
Changer
An optional six disc changer is
available for your vehicle. This disc
changer uses the same controls used
for the in-dash disc player or the
radio.
Load the desired discs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the disc changer, press the
CD/AUX button. The disc and track
numbers will be displayed. To select
a different disc, use the preset 5
(DISC −) or the preset 6 (DISC +)
button. To select the previous disc,
press the preset 5 (DISC −), or the
preset 6 (DISC +) to select the next
disc in sequence.
If you select an empty slot in the
magazine, the changer will search
for the next available disc to load and
play.
05/09/13 19:55:08 31SCV630 0118 Protecting Your Discs
General Information
When using CD-R or CD-RW discs,
use only high quality CDs labeled
for audio use.
Play only standard round discs.
Odd-shaped discs may jam in the
drive or cause other problems.
Handle your discs properly to
prevent damage and skipping.
To clean a disc, use a clean soft cloth.
Wipe across the disc from the center
to the outside edge.
A new disc may be rough on the
inner and outer edges. The small
plastic pieces causing this roughness
can flake off and fall on the recorded
surface of the disc, causing skipping
or other problems. Remove these
pieces by rubbing the inner and
outer edges with the side of a pencil
or pen.
Features
When recording a CD-R or
CD-RW, the recording must be
closed for it to be used by the
system.
Protecting Discs
When a disc is not being played,
store it in its case to protect it from
dust and other contamination. To
prevent warpage, keep discs out of
direct sunlight and extreme heat.
Handle a disc by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the disc.
These, along with contamination
from finger prints, liquids, and felttip pens, can cause the disc to not
play properly, or possibly jam in the
drive.
Never try to insert foreign objects in
the CD player or the magazine.
113
05/09/13 19:55:17 31SCV630 0119 Disc Player Error Messages
If you see an error message in the
display while playing a disc, find the
cause in the chart to the right. If you
cannot clear the error message, take
the vehicle to your dealer.
Indication
Cause
FOCUS error
Mechanical error
High temperature
Solution
Press the EJECT button and pull out the disc.
Check if it is inserted correctly in the player.
Make sure the disc is not scratched or damaged.
Press the EJECT button and pull out the disc.
Check the disc for damage or deformation.
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
Will disappear when the temperature returns to
normal.
: U.S. EX models and Canadian Y package
: Except U.S. EX models and Canadian Y package
114
05/09/13 19:55:28 31SCV630 0120 Disc Changer Error Messages
If you see an error message in the
display while playing a disc, find the
cause in the chart to the right. If you
cannot clear the error message, take
the vehicle to your dealer.
Indication
Cause
FOCUS error
Mechanical error
High temperature
No magazine in the
changer
Press the magazine eject button, and pull the
magazine out.
If the message does not disappear or the
magazine cannot be pulled out, see your dealer.
Insert disc.
Press the magazine eject button, and pull the
magazine out. Check for an error message, and
insert the magazine again. If the message does
not disappear or the magazine cannot be pulled
out, see your dealer.
Will disappear when the temperature returns to
normal.
Insert magazine.
: U.S. EX models and Canadian Y package
: Except U.S. EX models and Canadian Y package
115
Features
No disc in the magazine
Solution
05/09/13 19:55:33 31SCV630 0121 Radio Theft Protection
On U.S. EX models and Canadian Y
package
Your vehicle’s audio system will
disable itself if it is disconnected
from electrical power for any reason.
To make it work again, you must
enter a specific five-digit code in the
preset buttons. Because there are
hundreds of number combinations
possible from five-digits, making the
system work without knowing the
exact code is nearly impossible.
You should have received a card that
lists your audio system’s code and
serial numbers. It is best to store this
card in a safe place at home. In
addition, you should write the audio
system’s serial number in this owner’s
manual.
If you lose the card, you must obtain
the code number from a dealer. To
do this, you will need the system’s
serial number.
116
If your vehicle’s battery is
disconnected or goes dead, or the
radio fuse is removed, the audio
system will disable itself. If this
happens, you will see ‘‘CODE’’ in the
frequency display the next time you
turn on the system. Use the preset
buttons to enter the five-digit code.
The code is on the radio code card
included in your Owner’s Manual kit.
When it is entered correctly, the
radio will start playing.
If you make a mistake entering the
code, do not start over; complete the
five-digit sequence, then enter the
correct code. You have 10 tries to
enter the correct code. If you are
unsuccessful in 10 attempts, you
must then leave the system on for 1
hour before trying again.
05/09/13 19:55:42 31SCV630 0122 Setting the Clock
If your vehicle’s battery is
disconnected or goes dead, you will
need to set the clock.
On U.S. EX models
TIME DISPLAY
CLOCK
BUTTON
CLOCK
TIME
DISPLAY BUTTON
U.S. LX and Canadian Base models
H BUTTON
Features
To set the hour, press the H button
while pressing the CLOCK (SCAN/
RPT) button until the hour advances
to the desired time. Change the
minute by pressing the M button
while pressing the CLOCK (SCAN/
RPT) button until the minute
advances to the desired time.
R BUTTON
M BUTTON
You can use the R button to quickly
set the time to the nearest hour.
Press the R button while pressing
the CLOCK button. If the displayed
time is before the half hour, pressing
R sets the clock back to the previous
hour. If the displayed time is after
the half hour, pressing R sets the
clock forward to the beginning of the
next hour.
For example:
1:06 will reset to 1:00
1:53 will reset to 2:00
H BUTTON
R BUTTON
M BUTTON
Press and hold the CLOCK button
until the numbers flash and you hear
a beep. Change the hour by pressing
the H button until the numbers
advance to the desired time. Change
the minute by pressing the M button
until the numbers advance to the
desired time.
CONTINUED
117
05/09/13 19:55:48 31SCV630 0123 Setting the Clock
On Canadian Y package
TIME
DISPLAY CLOCK BUTTON
For example:
1:06 will reset to 1:00
1:53 will reset to 2:00
When you are finished, press the
CLOCK button again.
H BUTTON
R BUTTON
M BUTTON
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press the R
(RESET) button to set the clock
back to the previous hour. If the
displayed time is after the half hour,
pressing R sets the clock forward to
the beginning of the next hour.
118
05/09/13 19:55:54 31SCV630 0124 Remote Audio Controls
On all models except Canadian base
CH BUTTON
The middle button adjusts the
volume up (▲) or down (▼). Press
the top or bottom of the button and
hold it until the desired volume is
reached, then release it.
VOLUME
BUTTON
MODE
BUTTON
Three controls for the audio system
are mounted in the steering wheel
hub. These let you control basic
functions without removing your
hand from the wheel.
The CHANNEL button has two
functions, depending on whether you
are listening to the radio, or playing a
CD.
If you are playing a CD, the system
skips to the beginning of the next
track each time you push the CH
button. You will see the disc and
track number in the display.
119
Features
The MODE button changes the
mode. Pressing the button
repeatedly selects FM1, FM2, AM or
CD (if a CD is loaded).
If you are listening to the radio, use
the CH button to change stations.
Each time you press this button, the
system advances to the next preset
station on the band you are listening
to. You will see the number of the
selected Preset button in the display.
To change bands, or to change from
FM1 to FM2, press the MODE
button.
05/09/13 19:56:02 31SCV630 0125 Cruise Control
If equipped
Using Cruise Control
Cruise control allows you to maintain
a set speed above 25 mph (40 km/h)
without keeping your foot on the
accelerator pedal. It should be used
for cruising on straight, open
highways. It is not recommended for
city driving, winding roads, slippery
roads, heavy rain, or bad weather.
RES/ACCEL BUTTON
CANCEL
BUTTON
Improper use of the cruise
control can lead to a crash.
Use the cruise control only
when traveling on open
highways in good weather.
120
SET/DECEL BUTTON
1. Push in the cruise control master
button. The indicator in the button
comes on.
2. Accelerate to the desired cruising
speed above 25 mph (40 km/h).
3. Press and release the SET/
DECEL button on the steering
wheel. The indicator on the
instrument panel comes on to
show the system is now activated.
Cruise control may not hold the set
speed when you are going up and
down hills. If your speed increases
going down a hill, use the brakes to
slow down. This will cancel cruise
control. To resume the set speed,
press the RES/ACCEL button. The
indicator on the instrument panel will
come back on.
05/09/13 19:56:14 31SCV630 0126 Cruise Control
Changing the Set Speed
You can increase the set cruising
speed in any of these ways:
To increase the speed in very
small amounts, tap the RES/
ACCEL button. Each time you do
this, your vehicle speeds up about
1 mph (1.6 km/h).
Push on the accelerator pedal.
Accelerate to the desired cruising
speed, and press the SET/DECEL
button.
You can decrease the set cruising
speed in any of these ways:
Press and hold the SET/DECEL
button. Release the button when
you reach the desired speed.
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL indicator on
the instrument panel goes out.
When the vehicle slows to the
desired speed, press the SET/
DECEL button.
Even with cruise control turned on,
you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.
Resting your foot on the brake or
clutch pedal causes cruise control to
cancel.
Cancelling Cruise Control
You can cancel cruise control in any
of these ways:
Tap the brake or clutch pedal.
Push the CANCEL button on the
steering wheel.
Push the cruise control master
button.
Resuming the Set Speed
When you push the CANCEL button,
or tap the brake or clutch pedal, the
system remembers the previously
set cruising speed. To return to that
speed, accelerate to above 25 mph
(40 km/h), then press and release
the RES/ACCEL button. The
indicator comes on, and the vehicle
accelerates to the same cruising
speed as before.
Pressing the cruise control master
button turns the system off and
erases the previous cruising speed.
121
Features
Press and hold the RES/ACCEL
button. When you reach the
desired cruising speed, release the
button.
To slow down in very small
amounts, tap the SET/DECEL
button. Each time you do this,
your vehicle will slow down about
1 mph (1.6 km/h).
05/09/13 19:56:17 31SCV630 0127 122
05/09/13 19:56:20 31SCV630 0128 Before Driving
Break-in Period .............................. 124
Fuel Recommendation .................. 124
Service Station Procedures .......... 126
Refueling..................................... 126
Opening and Closing the
Hood ........................................ 127
Oil Check .................................... 128
Engine Coolant Check .............. 128
Fuel Economy ................................ 129
Accessories and Modifications .... 130
Carrying Cargo .............................. 132
123
Before Driving
Before you begin driving your
vehicle, you should know what
gasoline to use and how to check the
levels of important fluids. You also
need to know how to properly store
luggage or packages. The
information in this section will help
you. If you plan to add any
accessories to your vehicle, please
read the information in this section
first.
05/09/13 19:56:30 31SCV630 0129 Break-in Period, Fuel Recommendation
Break-in Period
Help assure your vehicle’s future
reliability and performance by paying
extra attention to how you drive
during the first 600 miles (1,000 km).
During this period:
Avoid full-throttle starts and rapid
acceleration.
Do not change the oil until the
scheduled maintenance time.
Avoid hard braking for the first
200 miles (300 km).
Do not tow a trailer.
You should also follow these
recommendations with an
overhauled or exchanged engine, or
when the brakes are replaced.
124
Fuel Recommendation
Your vehicle is designed to operate
on unleaded gasoline with a pump
octane number of 87 or higher. Use
of a lower octane gasoline can cause
a persistent, heavy metallic rapping
noise that can lead to engine damage.
On vehicles with manual transmission
You may hear a knocking noise from
the engine if you drive the vehicle at
low engine speed (below about 1,000
rpm) in a higher gear. To stop this,
raise the engine speed by shifting to
a lower gear.
We recommend quality gasoline
containing detergent additives that
help prevent fuel system and engine
deposits.
In addition, in order to maintain good
performance, fuel economy, and
emissions control, we strongly
recommend, in areas where it is
available, the use of gasoline that
does NOT contain manganese-based
fuel additives such as MMT.
05/09/13 19:56:34 31SCV630 0130 Fuel Recommendation
Some gasoline today is blended with
oxygenates such as ethanol or
MTBE. Your vehicle is designed to
operate on oxygenated gasoline
containing up to 10 % ethanol by
volume and up to 15 % MTBE by
volume. Do not use gasoline
containing methanol.
If you notice any undesirable
operating symptoms, try another
service station or switch to another
brand of gasoline.
For further important fuel-related
information, please refer to your
Quick Start Guide.
Before Driving
125
05/09/13 19:56:42 31SCV630 0131 Service Station Procedures
Refueling
1. Park with the driver’s side closest
to the gas pump.
2. Outside of the vehicle, locate and
open the fuel fill door by pulling on
the notched edge.
If the fuel nozzle keeps clicking off
Gasoline is highly flammable
and explosive. You can be
burned or seriously injured
when handling fuel.
Stop the engine, and keep
heat, sparks, and flame away.
Handle fuel only outdoors.
Wipe up spills immediately.
3. Remove the fuel fill cap slowly.
You may hear a hissing sound as
pressure inside the tank escapes.
Place the cap in the holder on the
fuel fill door.
4. Stop filling the tank after the fuel
nozzle automatically clicks off. Do
not try to ‘‘top off’’ the tank. Leave
some room for the fuel to expand
with temperature changes.
126
even though the tank is not full,
there may be a problem with your
vehicle’s fuel vapor recovery
system. The system helps keep
fuel vapors from going into the
atmosphere. Try filling at another
pump. If this does not fix the
problem, consult your dealer.
5. Screw the fuel fill cap back on
until it clicks at least once. If you
do not properly tighten the cap,
the malfunction indicator lamp
may come on (see page 210 ).
6. Push the fuel fill door closed.
05/09/13 19:56:51 31SCV630 0132 Service Station Procedures
Opening and Closing the Hood
HOOD RELEASE HANDLE
SUPPORT ROD
CLIP
1. Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
2. Put your fingers under the front
edge of the hood near the center.
The hood latch handle is above
the ‘‘H’’ logo. Push this handle up
to release it. Lift up the hood.
If the hood latch handle moves
stiffly, or if you can open the hood
without lifting the handle, the
mechanism should be cleaned and
lubricated.
3. Pull the support rod out of its clip
and insert the end into the hole in
the hood.
To Close the Hood:
Lift it up slightly to remove the
support rod from the hole. Put the
support rod back into its holding clip.
Lower the hood to about a foot
(30 cm) above the fender, then let it
drop. Make sure it is securely
latched.
127
Before Driving
LATCH
05/09/13 19:57:02 31SCV630 0133 Service Station Procedures
Oil Check
Engine Coolant Check
MAX
DIPSTICK
RESERVE TANK
UPPER MARK
LOWER MARK
MIN
Wait a few minutes after turning the
engine off before you check the oil.
1. Remove the dipstick (orange tab).
4. Remove the dipstick again, and
check the level. It should be
between the upper and lower
marks.
2. Wipe the dipstick with a clean
cloth or paper towel.
If it is near or below the lower mark,
see Adding Engine Oil on page 170 .
3. Insert it all the way back in its tube.
128
Look at the coolant level in the
radiator reserve tank. Make sure it is
between the MAX and MIN lines. If
it is below the MIN line, see Adding
Engine Coolant on page 173 for
information on adding the proper
coolant.
Refer to Owner’s Maintenance
Checks on page 164 for information
about checking other items on your
vehicle.
05/09/13 19:57:09 31SCV630 0134 Fuel Economy
Improving Fuel Economy
Always maintain your vehicle
according to the maintenance
schedule. See Owner’s
Maintenance Checks on page
164 .
For example, an underinflated tire
The build-up of snow or mud on
your vehicle’s underside adds
weight and rolling resistance.
Frequent cleaning helps your fuel
mileage and reduces the chance of
corrosion.
Combine several short trips into
one.
The air conditioning puts an extra
load on the engine which makes it
use more fuel. Use the fresh-air
ventilation when possible.
Before Driving
causes more ‘‘rolling resistance,’’
which uses more fuel.
Try to maintain a constant speed.
Every time you slow down and
speed up, your vehicle uses extra
fuel. Use cruise control when
appropriate.
Drive moderately. Rapid
acceleration, abrupt cornering,
and hard braking use more fuel.
Always drive in the highest gear
possible.
129
05/09/13 19:57:17 31SCV630 0135 Accessories and Modifications
Modifying your vehicle, or installing
some non-Honda accessories, can
make it unsafe. Before you make any
modifications or add any accessories,
be sure to read the following
information.
Accessories
Your dealer has Honda accessories
that allow you to personalize your
vehicle. These accessories have
been designed and approved for your
vehicle, and are covered by warranty.
Although non-Honda accessories
may fit on your vehicle, they may not
meet factory specifications, and
could adversely affect your vehicle’s
handling and stability.
130
Before installing any accessory:
Improper accessories or
modifications can affect your
vehicle’s handling, stability, and
performance, and cause a
crash in which you can be hurt
or killed.
Follow all instructions in this
owner’s manual regarding
accessories and modifications.
When properly installed, cellular
phones, alarms, two-way radios, and
low-powered audio systems should
not interfere with your vehicle’s
computer controlled systems, such
as your airbags and anti-lock brakes.
Make sure the accessory does not
obscure any lights, or interfere
with proper vehicle operation or
performance.
Be sure electronic accessories do
not overload electrical circuits
(see page 212 ) or interfere with
proper the operation of your
vehicle.
Before installing any electronic
accessory, have the installer
contact your dealer for assistance.
If possible, have your dealer
inspect the final installation.
05/09/13 19:57:24 31SCV630 0136 Accessories and Modifications
Modifying Your Vehicle
Removing parts from your vehicle,
or replacing components with some
non-Honda components could
seriously affect your vehicle’s
handling, stability, and reliability.
Modifying your steering wheel or
any other part of your vehicle’s
safety features can make the
systems ineffective.
Before Driving
Some examples are:
Lowering the vehicle with a nonHonda suspension kit that
significantly reduces ground
clearance can allow the
undercarriage to hit speed bumps
or other raised objects, which
could cause the airbags to deploy.
Larger or smaller wheels and tires
can interfere with the operation of
your vehicle’s anti-lock brakes and
other systems.
If you plan to modify your vehicle,
consult your dealer.
Raising your vehicle with a
non-Honda suspension kit can
affect the handling and stability.
Non-Honda wheels can cause
excessive stress on suspension
components.
131
05/09/13 19:57:33 31SCV630 0137 Carrying Cargo
CARGO AREA SIDE POCKET
DOOR POCKETS
CEILING POCKET
SEAT-BACK BUNGEES
CARGO AREA
132
SEAT-BACK POCKET
GLOVE BOX
Your vehicle has several convenient
storage areas:
Cargo area side pockets
Glove box
Ceiling pocket (U.S. EX models
and Canadian Y package)
Door pockets
Seat-back pocket (U.S. EX models
and Canadian Y package)
Cargo area (including rear seats
when they are folded down, folded
to the side, or removed)
Seat-back bungees (U.S. EX
models and Canadian Y package)
Roof rack (if installed)
However, carrying too much cargo,
or improperly storing it, can affect
your vehicle’s handling, stability,
stopping distance, and tires, and
make it unsafe. Before carrying any
type of cargo, be sure to read the
following pages.
05/09/13 19:57:42 31SCV630 0138 Carrying Cargo
Load Limits
The maximum load for your vehicle
is 675 lbs (308 kg). This figure
includes the total weight of all
occupants, cargo, and accessories,
and the tongue load if you are towing
a trailer.
Steps for determining correct load
limit:
1. Locate the statement, ‘‘the
combined weight of occupants and
cargo should never exceed 675
lbs’’ on your vehicle’s placard.
[The placard is on the driver’s
doorjamb.]
5. Determine the combined weight
of luggage and cargo being loaded
in the vehicle. That weight may
not safely exceed the available
cargo and luggage load capacity in
step 4.
Overloading or improper
loading can affect handling and
stability and cause a crash in
which you can be hurt or killed.
2. Determine the combined weight
of the driver and passengers that
will be riding in your vehicle.
6. If your vehicle will be towing a
trailer, the load from your trailer
will be transferred to your vehicle.
Consult this manual to determine
how this reduces the available
cargo and luggage load capacity of
your vehicle (see page 151 ).
3. Subtract the combined weight of
the driver and passengers from
675 pounds or 308 kilograms.
4. The resulting figure equals the
available amount of cargo and
luggage load capacity.
For example, if the maximum load
is 675 lbs and there will be four
150 lb. passengers in your vehicle,
the amount of available cargo and
CONTINUED
133
Before Driving
Follow all load limits and other
loading guidelines in this
manual.
luggage load capacity is 75 lbs.
(675 − 600 (4 × 150) = 75 lbs.)
05/09/13 19:57:51 31SCV630 0139 Carrying Cargo
In addition, the total weight of the
vehicle, all passengers, accessories,
cargo, and trailer tongue load must
not exceed the Gross Vehicle
Weight Rating (GVWR) or the Gross
Axle Weight Rating (GAWR). Both
are on a label on the driver’s
doorjamb.
Carrying Items in the Passenger
Compartment
Store or secure all items that could
be thrown around and hurt
someone during a crash.
Be sure items placed on the floor
behind the front seats cannot roll
under the seats and interfere with
the driver’s ability to operate the
pedals or the proper operation of
the seats.
Keep the glove box closed while
driving. If it is open, a passenger
could injure their knees during a
crash or sudden stop.
134
If you fold the rear seats down,
fold them up, or remove them, tie
down items that could be thrown
about the vehicle during a crash or
sudden stop.
Carrying Cargo in the Cargo Area
or on a Roof Rack
Distribute cargo evenly on the
floor of the cargo area, placing the
heaviest items on the bottom and
as far forward as possible. Tie
down items that could be thrown
about the vehicle during a crash or
sudden stop.
If you carry large items that
prevent you from closing the
tailgate or the hatch, exhaust gas
can enter the passenger area. To
avoid the possibility of carbon
monoxide poisoning, follow the
instructions on page 47 .
If you carry any items on a roof
rack, be sure the total weight of
the rack and the items does not
exceed 165 lbs (75 kg).
If you use an accessory roof rack,
the roof rack weight limit may be
lower. Refer to the information that
came with your roof rack.
Optional Separation Net
The separation net can be used to
hold back soft, lightweight items
stored in the cargo area. Heavy
items should be properly secured on
the floor of the cargo area. The net
may not prevent heavy items from
being thrown forward in a crash or a
sudden stop.
05/09/13 19:57:57 31SCV630 0140 Carrying Cargo
Seat-Back Bungee
If equipped
ADJUSTABLE BUNGEE CORD
If the cords are not installed, route
one cord through the loops as shown.
To attach the hooks, press the top of
the hook down, and slide to the
desired position, then release. Adjust
as needed.
LOOP
Before Driving
HOOK
The driver’s seat-back and left rear
seat-back are equipped with
adjustable bungee cords to hold
medium-sized, lightweight objects.
135
05/09/13 19:57:59 31SCV630 0141 136
05/09/13 19:58:03 31SCV630 0142 Driving
This section gives you tips on
starting the engine under various
conditions, and how to operate the
manual and automatic transmissions.
It also includes important
information on parking your vehicle,
the braking system, and facts you
need if you are planning to tow a
trailer or drive off-highway.
Driving Guidelines ......................... 138
Preparing to Drive ......................... 139
Starting the Engine........................ 140
Manual Transmission.................... 141
Automatic Transmission............... 143
Parking ............................................ 147
Braking System.............................. 148
Anti-lock Brakes (ABS) ................ 149
Towing a Trailer ............................ 151
Off-Highway Driving
Guidelines ................................... 157
Driving
137
05/09/13 19:58:11 31SCV630 0143 Driving Guidelines
Your vehicle has a higher ground
clearance that allows you to travel
over bumps, obstacles, and rough
terrain. It also provides good
visibility so you can anticipate
problems earlier.
Because your vehicle rides higher
off the ground, it has a high center
of gravity that can cause it to roll
over if you make abrupt turns. Utility
vehicles have a significantly higher
roll over rate than other types of
vehicles.
To prevent rollovers or loss of
control:
Take corners at slower speeds
than you would with a passenger
vehicle.
Avoid sharp turns and abrupt
maneuvers whenever possible.
138
Do not modify your vehicle in any
way that would raise the center of
gravity.
Do not carry heavy cargo on the
roof.
Four-wheel drive models
Your vehicle is equipped with a fourwheel drive (4WD) system. When
the system senses a loss of frontwheel traction, it automatically
transfers some power to the rear
wheels. This gives you better
traction and mobility.
You still need to exercise the same
care when accelerating, steering, and
braking that you would in a twowheel drive vehicle.
See page 157 for off-highway driving
guidelines.
05/09/13 19:58:21 31SCV630 0144 Preparing to Drive
You should do the following checks
and adjustments before you drive
your vehicle.
1. Make sure all windows, mirrors,
and outside lights are clean and
unobstructed. Remove frost, snow,
or ice.
2. Check that the hood is fully closed.
5. Check the seat adjustment (see
page 73 ).
6. Check the adjustment of the
inside and outside mirrors (see
page 82 ).
7. Check the steering wheel
adjustment (see page 64 ).
8. Make sure the doors, hatch, and
tailgate are securely closed and
locked.
9. Fasten your seat belt. Check that
your passengers have fastened
their seat belts (see page 15 ).
10.When you start the engine, check
the gauges and indicators in the
instrument panel (see page 53 ).
Driving
3. Visually check the tires. If a tire
looks low, use a gauge to check its
pressure.
4. Check that any items you may be
carrying with you inside are stored
properly or fastened down
securely.
139
05/09/13 19:58:30 31SCV630 0145 Starting the Engine
1. Apply the parking brake.
2. In cold weather, turn off all
electrical accessories to reduce
the drain on the battery.
3. Manual transmission:
Push the clutch pedal down all the
way.
Automatic transmission:
Make sure the shift lever is in
Park. Press on the brake pedal.
4. Without touching the accelerator
pedal, turn the ignition key to the
START (III) position. Do not hold
the key in the START (III)
position for more than 15 seconds
at a time. If the engine does not
start right away, pause for at least
10 seconds before trying again.
140
The immobilizer system protects your
vehicle f rom thef t. If an improperlycoded key (or other device) is used, the
engine’s f uel system is disabled. For
more inf ormation, see page 66 .
5. If the engine does not start within
15 seconds, or starts but stalls
right away, repeat step 4 with the
accelerator pedal pressed halfway
down. If the engine starts, release
pressure on the accelerator pedal
so the engine does not race.
6. If the engine fails to start, press
the accelerator pedal all the way
down, and hold it there while
starting to clear flooding. If the
engine still does not start, return
to step 5.
The engine is harder to start in cold
weather. Also, the thinner air f ound at
altitudes above 8,000 f eet (2,400
meters) adds to this problem.
05/09/13 19:58:35 31SCV630 0146 Manual Transmission
Come to a full stop before you shift
into reverse. You can damage the
transmission by trying to shift into
reverse with the vehicle moving.
Push down the clutch pedal, and
pause for a few seconds before
shifting into reverse, or shift into one
of the forward gears for a moment.
This stops the gears so they won’t
‘‘grind.’’
Use extra care when driving on
slippery surfaces.
When slowing down, you can get
extra braking from the engine by
shifting to a lower gear. This extra
braking can help you maintain a safe
speed and prevent your brakes from
overheating while going down a
steep hill. Before downshifting,
make sure the engine speed will not
go into the tachometer’s red zone in
the lower gear.
Driving
The manual transmission is
synchronized in all forward gears for
smooth operation. It has a lockout so
you cannot shift directly from fifth to
reverse. When shifting up or down,
make sure you push the clutch pedal
down all the way, shift to the next
gear, and let the pedal up gradually.
When you are not shifting, do not
rest your foot on the clutch pedal.
This can cause your clutch to wear
out faster.
Rapid slowing or speeding-up
can cause loss of control on
slippery surfaces. If you crash,
you can be injured.
141
05/09/13 19:58:40 31SCV630 0147 Manual Transmission
Recommended Shift Points
Drive in the highest gear that lets
the engine run and accelerate
smoothly. This will give you good
fuel economy and effective
emissions control. The following
shift points are recommended:
Shift up
Normal acceleration
1st to 2nd
2nd to 3rd
3rd to 4th
4th to 5th
15 mph (24 km/h)
25 mph (40 km/h)
40 mph (64 km/h)
48 mph (77 km/h)
142
Engine Speed Limiter
If you exceed the maximum speed
for the gear you are in, the engine
speed will enter into the tachometer’s
red zone. If this occurs, you may feel
the engine cut in and out. This is
caused by a limiter in the engine’s
computer controls. The engine will
run normally when you reduce the
rpm below the red zone.
Before downshifting, make sure the
engine will not go into the
tachometer’s red zone.
05/09/13 19:58:49 31SCV630 0148 Automatic Transmission
Shift Lever Position Indicators
Shifting
To shift from:
P to R
SHIFT LEVER
These indicators on the instrument
panel show which position the shift
lever is in.
The ‘‘D’’ indicator comes on for a
few seconds when you turn the
ignition switch to the ON (II)
position. If it flashes while driving (in
any shift position), it indicates a
possible problem in the transmission.
Avoid rapid acceleration, and have
the transmission checked by your
dealer as soon as possible.
To shift from any position, press
firmly on the brake pedal, push the
release button, and pull the lever
toward you. You cannot shift out of
Park when the ignition switch is in
the LOCK (0) or ACCESSORY (I)
position.
Press the release button.
Move the lever.
Park (P) − This position mechanically locks the transmission. Use
Park whenever you are turning off or
starting the engine. To shift out of
Park, you must press on the brake
pedal and have your foot off the
accelerator pedal.
If you have done all of the above and
still cannot move the lever out of
Park, see Shift Lock Release on
page 146 .
CONTINUED
143
Driving
R to N
N to D
D to 2
2 to 1
1 to 2
2 to D
D to N
N to R
R to P
Do this:
Press the brake pedal, and
press the release button.
05/09/13 19:58:56 31SCV630 0149 Automatic Transmission
To avoid transmission damage, come
to a complete stop before shifting
into Park. The shift lever must be in
Park before you can remove the key
from the ignition switch.
Reverse (R) − Press the brake
pedal and press the release button to
shift from Park to reverse. To shift
from reverse to neutral, come to a
complete stop, and then shift.
Your vehicle has a reverse lockout so
you cannot accidentally shift to
reverse when the vehicle speed
exceeds 5 mph (8 km/h).
If you cannot shift to reverse when
the vehicle is stopped, press the
brake pedal and slowly shift to
neutral. Then press the release
button, and shift to reverse.
If there is a problem in the reverse
lockout system, or your vehicle’s
battery is disconnected or goes dead,
you cannot shift to reverse. (Refer to
Shift Lock Release on page 146 ).
Neutral (N) − Use neutral if you
need to restart a stalled engine, or if
it is necessary to stop briefly with
the engine idling. Shift to the Park
position if you need to leave your
vehicle for any reason. Press on the
brake pedal when you are moving
the shift lever from neutral to
another gear.
Drive (D) − Use this position for
your normal driving. The
transmission automatically selects a
suitable gear for the vehicle speed
and acceleration. You may notice the
transmission shifting up at higher
speeds when the engine is cold. This
helps the engine warm up faster.
144
05/09/13 19:59:07 31SCV630 0150 Automatic Transmission
Overdrive (O/D) Mode
When overdrive is off, the
transmission selects only the first
three gears. Use it to provide engine
braking when going down a steep hill,
or to keep the transmission from
cycling between third and fourth
gear in stop-and-go driving.
Use second gear:
Overdrive (O/D) is on whenever you
turn the ignition to ON (II). Press
the O/D switch on the side of the
shift lever to turn it off; the O/D
OFF indicator comes on.
Overdrive can be turned on or off
only when the ignition switch is in
the ON (II) position.
For more power when climbing.
To increase engine braking when
going down steep hills.
For starting out on a slippery
surface or in deep snow.
To help reduce wheel spin.
When driving downhill with a
trailer.
If you shift into first when the
vehicle speed is above 31 mph (50
km/h), the transmission shifts into
second gear first to avoid sudden
engine braking.
Engine Speed Limiter
If you exceed the maximum speed
for the gear you are in, the engine
speed will enter into the tachometer’s
red zone. If this occurs, you may feel
the engine cut in and out. This is
caused by a limiter in the engine’s
computer controls. The engine will
run normally when you reduce the
rpm below the red zone.
145
Driving
Second (2) − This position locks
the transmission in second gear. It
does not downshift to first gear
when you come to a stop.
First (1) − This position locks the
transmission in first gear. By
upshifting and downshifting through
1, 2, and D, you can operate this
transmission much like a manual
transmission without a clutch pedal.
05/09/13 19:59:17 31SCV630 0151 Automatic Transmission
Shift Lock Release
Do this if pushing on the brake pedal
and pulling the shift lever does not
shift the transmission out of Park:
COVER
1. Set the parking brake.
2. Make sure the ignition switch is in
the LOCK (0) position.
To release the reverse lockout,
make sure the ignition switch is in
the ACCESSORY(I) position.
3. Put a cloth on the edge of the shift
lock release slot cover next to the
shift lever. Using a flathead
screwdriver, carefully pry on the
edge of the cover to remove it.
SHIFT LOCK RELEASE SLOT
4. Insert the flat-tip screwdriver into
the shift lock release slot.
5. Push down on the screwdriver
while you press the release button
and move the shift lever out of
Park to neutral.
To release the reverse lockout,
move the shift lever from neutral
to reverse, then to Park.
146
6. Remove the screwdriver from the
shift lock release slot, then replace
the cover. Make sure the notch on
the cover is on the right side.
Press the brake pedal and restart
the engine.
If you need to use the shift lock
release, it means your vehicle is
developing a problem. Have it
checked by your dealer.
05/09/13 19:59:26 31SCV630 0152 Parking
Always use the parking brake when
you park your vehicle. Make sure
the parking brake is set firmly, or
your vehicle may roll if it is parked
on an incline.
Turn off the lights.
Place any packages, valuables, etc.
in the cargo area or take them
with you.
Lock the doors and the hatch with
the key.
Never park over dry leaves, tall
grass, or other flammable
materials. The hot three way
catalytic converter could cause
these materials to catch on fire.
If the vehicle is facing uphill, turn
the front wheels away from the
curb. If you have a manual
transmission, put it in first gear.
If the vehicle is facing downhill,
turn the front wheels toward the
curb. If you have a manual
transmission, put it in reverse gear.
Make sure the parking brake is
fully released before driving away.
Driving with the parking brake
partially set can overheat or
damage the rear brakes.
147
Driving
If your vehicle has an automatic
transmission, set the parking brake
before you put the transmission in
Park. This keeps the vehicle from
moving and putting pressure on the
parking mechanism in the
transmission.
Parking Tips
Make sure the windows are closed.
05/09/13 19:59:31 31SCV630 0153 Braking System
Your vehicle is equipped with disc
brakes at all four wheels. A power
assist helps reduce the effort needed
on the brake pedal. The anti-lock
brake system (ABS) helps you retain
steering control when braking very
hard.
Constant application of the brakes
when going down a long hill builds
up heat and reduces their effectiveness. Use the engine to assist the
brakes by taking your foot off the
accelerator and downshifting to a
lower gear.
Resting your foot on the pedal keeps
the brakes applied lightly, builds up
heat, and reduces their effectiveness.
It also keeps your brake lights on all
the time, confusing drivers behind
you.
Check the brakes after driving
through deep water. Apply the
brakes moderately to see if they feel
normal. If not, apply them gently and
frequently until they do. Be extra
cautious in your driving.
148
Braking System Design
The hydraulic system that operates
the brakes has two separate circuits.
Each circuit works diagonally across
the vehicle (the left-front brake is
connected with the right-rear brake,
etc.). If one circuit should develop a
problem, you will still have braking
at two wheels.
05/09/13 19:59:37 31SCV630 0154 Braking System, Anti-lock Brakes (ABS)
Brake Wear Indicators
If the brake pads need replacing, you
will hear a distinctive, metallic
screeching sound when you apply
the brake pedal. If you do not have
the brake pads replaced, they will
screech all the time. It is normal for
the brakes to occasionally squeal or
squeak when you apply them.
Anti-lock Brakes
The anti-lock brake system (ABS)
helps prevent the brakes from
locking up, and helps you retain
steering control by pumping the
brakes rapidly, much faster than a
person can do it.
The ABS also balances the front-torear braking distribution according
to vehicle loading.
You will feel a pulsation in the brake
pedal when the ABS activates, and
you may hear some noise. This is
normal: it is the ABS rapidly
pumping the brakes. On dry
pavement, you will need to press on
the brake pedal very hard before the
ABS activates. However, you may
feel the ABS activate immediately if
you are trying to stop on snow or ice.
Driving
You should never pump the brake pedal.
Let the ABS work for you by always
keeping firm, steady pressure on the
brake pedal. This is sometimes
referred to as ‘‘stomp and steer.’’
149
05/09/13 19:59:44 31SCV630 0155 Anti-lock Brakes (ABS)
ABS Indicator
If this indicator comes on, the antilock function of the braking system
has shut down. The brakes still work
like a conventional system, but
without anti-lock. You should have
your dealer inspect your vehicle as
soon as possible.
If the indicator comes on while
driving, test the brakes as instructed
on page 55 .
If the ABS indicator and the brake
system indicator come on together
and the parking break is fully
released, the front-to-rear braking
distribution system may also shut
down.
Test your brakes as instructed on
page 211 . If the brakes feel normal,
drive slowly and have your vehicle
repaired by your dealer as soon as
possible. Avoid sudden hard braking
which could cause the rear wheels to
lock up and possibly lead to a loss of
control.
Important Safety Reminders
ABS does not reduce the time or
distance it takes to stop the
vehicle. It only helps with steering
control during braking.
150
ABS will not prevent a skid that
results from changing direction
abruptly, such as trying to take a
corner too fast or making a sudden
lane change.
ABS cannot prevent a loss of
stability. Always steer moderately
when you are braking hard. Severe
or sharp steering wheel movement
can still cause your vehicle to veer
into oncoming traffic or off the road.
A vehicle with ABS may require a
longer distance to stop on loose or
uneven surfaces, such as gravel or
snow, than a vehicle without antilock.
05/09/13 19:59:52 31SCV630 0156 Towing a Trailer
Your vehicle has been designed to
primarily carry passengers and their
cargo. You can also use it to tow a
trailer if you carefully observe the
load limits, use the proper equipment,
and follow the guidelines in this
section.
Load Limits
Exceeding any load limit or
improperly loading your vehicle
and trailer can cause a crash in
which you can be seriously hurt
or killed.
Check the loading of your
vehicle and trailer carefully
before starting to drive.
Total Trailer Weight: The
maximum allowable weight of the
trailer and everything in or on it
must not exceed 1,500 lbs (680 kg).
Towing a trailer that is too heavy
can seriously affect your vehicle’s
handling and performance. It can
also damage the engine and
drivetrain.
Tongue Load: The weight that
the tongue of a fully-loaded trailer
puts on the hitch should be
approximately 10 % of the total
trailer weight. Too much tongue
load reduces front-tire traction and
steering control. Too little tongue
load can make the trailer unstable
and cause it to sway.
CONTINUED
151
Driving
Be sure to read the Driving OffHighway Guidelines section on page
157 if you plan to tow off paved
surfaces.
05/09/13 19:59:58 31SCV630 0157 Towing a Trailer
To achieve a proper tongue load,
start by loading 60 % of the load
toward the front of the trailer and
40 % toward the rear, then re-adjust
the load as needed.
Gross Vehicle Weight Rating
(GVWR):
The maximum allowable weight of
the vehicle, all occupants, all cargo,
and tongue load is:
4,450 Ibs (2,020 kg)
152
Gross Axle Weight Rating
(GAWR):
The maximum allowable weight of
the vehicle axles is:
2,300 Ibs (1,045 kg)
on the front axle
2,205 Ibs (1,000 kg)
on the rear axle
Checking Loads
The best way to confirm that vehicle
and trailer weights are within limits
is to have them checked at a public
scale.
Using a suitable scale or a special
tongue load gauge, check the tongue
load the first time you set up a
towing combination (a fully-loaded
vehicle and trailer), then recheck the
tongue load whenever the conditions
change.
05/09/13 20:00:07 31SCV630 0158 Towing a Trailer
Towing Equipment and
Accessories
Towing can require a variety of
equipment, depending on the size of
your trailer, how it will be used, how
much load you are towing, and
where you tow. To ensure the
highest quality equipment, purchase
Honda equipment whenever possible.
Trailer Brakes
Honda recommends that any trailer
having a total weight of 1,000 lbs
(450 kg) or more be equipped with
its own electric or surge-type brakes.
Safety Chains
Always use safety chains when you
tow a trailer. Make sure the chains
are secured to the trailer and hitch,
and that they cross under the tongue
and can catch the trailer if it
becomes unhitched. Leave enough
slack to allow the trailer to turn
corners easily, but do not let the
chains drag on the ground.
If you choose electric brakes, be
sure they are electrically actuated.
Do not attempt to tap into your
vehicle’s hydraulic system. No
matter how successful it may seem,
any attempt to attach trailer brakes
to your vehicle’s hydraulic system
will lower braking effectiveness and
create a potential hazard.
See your trailer dealer for more
information on installing electric
brakes.
CONTINUED
153
Driving
Discuss your needs with your trailer
sales or rental agency, and follow the
guidelines in the rest of this section.
Also make sure that all equipment is
properly installed and that it meets
federal, state, province, and local
regulations.
Hitches
Any hitch used on your vehicle must
be properly bolted to the underbody.
05/09/13 20:00:12 31SCV630 0159 Towing a Trailer
Trailer Lights
Additional Towing Equipment
Trailer lights and equipment must
comply with federal, state, and local
regulations. Check with your trailer
sales or rental agency for the
requirements in your area, and use
only equipment designed for your
vehicle.
Many states and Canadian provinces
require special outside mirrors when
towing a trailer. Even if they don’t,
you should install special mirrors if
you cannot clearly see behind you, or
if the trailer creates a blind spot.
Since lighting and wiring vary by
trailer type and brand, you should
have a qualified technician install a
suitable connector between the
vehicle and the trailer. Improper
equipment or installation can cause
damage to your vehicle’s electrical
system and affect your vehicle
warranty.
154
Ask your trailer sales or rental
agency if any other items are
recommended or required for your
towing situation.
05/09/13 20:00:22 31SCV630 0160 Towing a Trailer
Pre-Tow Checklist
When preparing to tow, and before
driving away, be sure to check the
following:
The vehicle has been properly
serviced, and the tires, brakes,
suspension, cooling system, and
lights are in good operating
condition.
Driving Safely With a Trailer
The added weight, length, and
height of a trailer will affect your
vehicle’s handling and performance,
so driving with a trailer requires
some special driving skills and
techniques.
For your safety and the safety of
others, take time to practice driving
maneuvers before heading for the
open road, and follow the guidelines
below.
Towing Speeds and Gears
All weights and loads are within
limits (see pages 151 and 152 ).
The hitch, safety chains, and any
other attachments are secure.
All items in or on the trailer are
properly secured and cannot shift
while you drive.
Drive slower than normal in all
driving situations, and obey posted
speed limits for vehicles with trailers.
If you have an automatic
transmission, use overdrive (O/D)
when towing a trailer on level roads.
Turn off the overdrive (O/D) when
towing a trailer in hilly terrain.
CONTINUED
155
Driving
The trailer has been properly
serviced and is in good condition.
Your vehicle tires and spare are
properly inflated (see page 187 ),
and the trailer tires and spare are
inflated as recommended by the
trailer maker.
05/09/13 20:00:31 31SCV630 0161 Towing a Trailer
Making Turns and Braking
Make turns more slowly and wider
than normal. The trailer tracks a
smaller arc than your vehicle, and it
can hit or run over something the
vehicle misses. Allow more time and
distance for braking. Do not brake or
turn suddenly as this could cause the
trailer to jackknife or turn over.
Driving on Hills
When climbing hills, closely watch
your temperature gauge. If it nears
the red (Hot) mark, turn the air
conditioning off, reduce speed and, if
necessary, pull to the side of the
road to let the engine cool.
If the automatic transmission shifts
frequently between 3rd and 4th
gears while going up a hill, turn off
the overdrive (O/D) (see page 145 ).
156
If you must stop when facing uphill,
use the foot brake or parking brake.
Do not try to hold the vehicle in
place by pressing on the accelerator,
as this can cause the automatic
transmission to overheat.
When driving down hills, reduce
your speed and shift down to 3rd
gear (manual transmission) or turn
off the overdrive (O/D) (automatic
transmission). Do not ‘‘ride’’ the
brakes, and remember it will take
longer to slow down and stop when
towing a trailer.
Handling Crosswinds and Buffeting
Crosswinds and air turbulence
caused by passing trucks can disrupt
your steering and cause trailer to
sway. When being passed by a large
vehicle, keep a constant speed, and
steer straight ahead. Do not try to
make quick steering or braking
corrections.
Backing Up
Always drive slowly and have
someone guide you when backing up.
Grip the bottom of the steering
wheel; then turn the wheel to the left
to get the trailer to move to the left,
and turn the wheel right to move the
trailer to the right.
Parking
Follow all normal precautions when
parking, including firmly setting the
parking brake and putting the
transmission in Park (automatic) or
in 1st or reverse (manual). Also,
place wheel chocks at each of the
trailer’s tires.
05/09/13 20:00:39 31SCV630 0162 Off-Highway Driving Guidelines
General Information
Your vehicle has been designed
primarily for use on pavement. But
its higher ground clearance allows
you to occasionally travel on unpaved
roads, to campgrounds, picnic sites,
and similar locations. It is not
designed for trail-blazing, mountain
climbing, or other challenging offroad activities.
Follow all instructions and
guidelines in this owner’s
manual.
Keep your speed low, and
don’t drive faster than
conditions permit.
Be sure to store cargo properly,
and do not exceed your vehicle
cargo load limits (see pages
133 and 151 ).
Wherever you drive, make sure
you and your passengers always
wear seat belts.
Keep your speed low, and never
go faster than the conditions allow.
It’s up to you to continually assess
the situation and drive within the
limits.
157
Driving
If you decide to drive on unpaved
roads, you will find that it requires
somewhat different driving skills.
Your vehicle will also handle
somewhat differently than it does on
pavement. So be sure to read this
owner’s manual, pay special attention
to the precautions and tips in this
section, and get acquainted with
your vehicle before you leave the
pavement.
Improperly operating this
vehicle on or off-pavement can
cause an accident or rollover in
which you and your passengers
could be seriously injured or
killed.
Important Safety Precautions
To avoid loss of control or rollover,
be sure to follow all precautions and
recommendations.
05/09/13 20:00:49 31SCV630 0163 Off-Highway Driving Guidelines
Check Out Your Vehicle
Before you leave the pavement, be
sure to do all scheduled maintenance
and service, and inspect your vehicle
for any problems. Pay special
attention to the condition of the tires,
and check the tire pressures.
After you return to the pavement,
carefully inspect your vehicle to
make sure there is no damage that
could make driving it unsafe.
Recheck the condition of the tires
and the tire pressures.
Remember
The route presents limits (too steep
or bumpy roads). You have limits
(driving skill and comfort). And your
vehicle has limits (traction, stability,
and power).
Driving off-highway can be
hazardous if you fail to recognize
limits and take the proper
precautions.
158
Accelerating and Braking
For better traction on all surfaces,
accelerate slowly and gradually build
up speed. If you try to start too fast
on wet soil, mud, snow, or ice, you
might not have enough traction to
get underway, and you may dig
yourself a hole. Starting with the
shift lever in second (2) gear will
help you have a smoother start on
snow or ice.
Keep in mind that you will usually
need more time and distance to
brake to a stop on unpaved surfaces.
Avoid hard braking. Do not ‘‘pump’’
the brakes; let the anti-lock braking
system pump them for you.
Avoiding Obstacles
Debris in the road can damage your
suspension or other components.
Because your vehicle has a high
center of gravity, driving over a large
obstacle, or allowing a wheel to drop
into a deep hole can cause your
vehicle to tip or roll over.
Driving on Slopes
If you can’t clearly see all conditions
or obstacles on a slope, walk the
slope before you drive on it. If you
have any doubt whether or not you
can safely drive on the slope, don’t
do it. Find another route.
If you are driving up a hill and find
that you cannot continue, do not try to
turn around. Your vehicle could roll
over. Slowly back down the hill,
following the same route you took up
the hill.
05/09/13 20:00:56 31SCV630 0164 Off-Highway Driving Guidelines
Crossing a Stream
Avoid driving through deep water. If
you encounter water in your route (a
small stream or large puddle, for
example), evaluate it carefully before
going ahead. Make sure it is shallow,
flowing slowly, and has firm ground
underneath. If you are not sure of
the depth or the ground, turn around
and find another route.
You should never use a jack to try
getting unstuck. A jack only works
on firm, level ground. Also, your
vehicle could easily slip off the jack
and hurt you or someone else.
4-Wheel Drive Vehicles
If you spin the wheels excessively
trying to get unstuck, you may
overheat the components of the
4-wheel drive system. If this happens,
the 4-wheel drive system shuts off
and only the front wheels receive
power. If this happens, stop and
allow everything to cool down. The
4-wheel drive system will work again
after its temperature drops.
If you slip the clutch for a long time
while trying to get unstuck, you may
overheat and damage it.
159
Driving
Driving through deep water can also
damage your vehicle. The water can
get into the transmission and
differential, diluting the lubricant
and causing an eventual failure. It
can also wash the grease out of the
wheel bearings.
If You Get Stuck
Avoid driving on soft sand, deep mud,
or other surfaces where you could
get stuck. If you do happen to get
stuck because of inclement weather
or other conditions, choose a safe
and appropriate course of action.
05/09/13 20:00:57 31SCV630 0165 160
05/09/13 20:01:02 31SCV630 0166 Maintenance
This section explains why it is
important to keep your vehicle well
maintained and how to follow basic
maintenance safety precautions.
This section also includes
maintenance schedules for normal
driving and severe driving conditions,
a maintenance record, and
instructions for simple maintenance
tasks you may want to take care of
yourself.
161
Maintenance
If you have the skills and tools to
perform more complex maintenance
tasks on your vehicle, you may want
to purchase the service manual. See
page 237 for information on how to
obtain a copy, or see your dealer.
Maintenance Safety ....................... 162
Maintenance Schedule .................. 163
Maintenance Record ..................... 167
Fluid Locations............................... 169
Adding Engine Oil ......................... 170
Changing the Oil and Filter .......... 171
Engine Coolant ............................... 173
Windshield Washers ..................... 174
Automatic Transmission Fluid..... 175
Manual Transsmission Fluid........ 176
Brake and Clutch Fluid ................. 177
Power Steering Fluid ..................... 178
Cleaning the Body Panels ............. 178
Lights .............................................. 179
Cleaning the Seat Belts ................. 185
Dust and Pollen Filter ................... 185
Wiper Blades .................................. 186
Tires ................................................ 187
Checking the Battery .................... 193
Vehicle Storage .............................. 194
05/09/13 20:01:12 31SCV630 0167 Maintenance Safety
All service items not detailed in this
section should be performed by a
certified technician or other qualified
mechanic.
Important Safety Precautions
To eliminate potential hazards, read
the instructions before you begin,
and make sure you have the tools
and skills required.
Make sure your vehicle is parked
on level ground, the parking brake
is set, and the engine is off.
To clean parts, use a commercially
available degreaser or parts
cleaner, not gasoline.
To reduce the possibility of fire or
explosion, keep cigarettes, sparks,
and flames away from the battery
and all fuel-related parts.
Wear eye protection and
protective clothing when working
162
with the battery or compressed air.
Improperly maintaining this
vehicle or failing to correct a
problem before driving can
cause a crash in which you can
be seriously hurt or killed.
Always follow the inspection
and maintenance
recommendations, and
schedules in this owner’s
manual.
Potential Vehicle Hazards
Carbon Monoxide poison from
engine exhaust. Be sure there is
adequate ventilation whenever you
operate the engine.
Burns from hot parts. Let the
engine and exhaust system cool
down before touching any parts.
Injury from moving parts. Do
not run the engine unless
instructed to do so.
Failure to properly follow
maintenance instructions and
precautions can cause you to
be seriously hurt or killed.
Always follow the procedures
and precautions in this owner’s
manual.
Some of the most important safety
precautions are given here. However,
we cannot warn you of every
conceivable hazard that can arise in
performing maintenance. Only you
can decide whether or not you
should perform a given task.
05/09/13 20:01:22 31SCV630 0168 Maintenance Schedule
The maintenance schedule assumes
you will use your vehicle as normal
transportation for passengers and
their possessions. You should also
follow these recommendations:
Avoid exceeding your vehicle’s
load limit. This puts excess stress
on the engine, brakes, and many
other vehicle parts. The load limit
is shown on the tire information
label on the driver’s doorjamb.
Drive your vehicle regularly over a
distance of several miles
(kilometers).
Always use unleaded gasoline with
the proper octane rating (see page
124 ).
U.S. Owners − Follow the
maintenance schedule for severe
conditions if you drive your vehicle
MAINLY under one or more of the
following conditions.
Driving less than 5 miles (8 km)
per trip, or in freezing
temperatures, driving less than 10
miles (16 km) per trip.
Trailer towing, driving with a
loaded roof rack, or driving in
mountainous conditions.
Driving on muddy, dusty, or deiced roads.
NOTE: If you only OCCASIONALLY
drive under a ‘‘severe’’ condition, you
should follow the normal conditions
maintenance schedule.
Canadian Owners − Follow the
maintenance schedule for severe
conditions.
Driving in extremely hot [over
90°F (32°C)] conditions.
Used primarily as a delivery
vehicle or taxi that is driven
mostly in stop-and-go traffic and/
or parked with the engine idling.
163
Maintenance
Operate your vehicle on
reasonable roads within the legal
speed limit.
Which Schedule to Follow
Service your vehicle according to the
time and mileage periods on one of
the maintenance schedules on the
following pages.
05/09/13 20:01:32 31SCV630 0169 Maintenance Schedule
Servicing Your Vehicle
Your authorized dealer knows your
vehicle best and can provide
competent, efficient service.
However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualified service facility or
skilled person to keep your
warranties in effect. Keep all the
receipts as proof of completion, and
have the person who does the work
fill out the maintenance record.
Check your warranty booklet for
more information.
We recommend the use of Honda
parts and fluids whenever you have
maintenance done.
164
U.S. Vehicles:
Maintenance, replacement, or
repair of emissions control
devices and systems may be done
by any automotive repair
establishment or individual using
parts that are ‘‘certified’’ to EPA
standards.
According to state and federal
regulations, failure to perform
maintenance on the items marked
with # will not void your emissions
warranties. However, all
maintenance services should be
performed at the recommended time
or mileage period to ensure longterm reliability.
Owner’s Maintenance Checks
You should check the following
items at the specified intervals. If
you are unsure of how to perform
any check, turn to the appropriate
page listed.
Engine oil level − Check every
time you fill the fuel tank. See
page 128 .
Engine coolant level − Check the
radiator reserve tank every time
you fill the fuel tank. See page 128 .
Automatic transmission − Check
the fluid level monthly. See page
175 .
Brakes − Check the fluid level
monthly. See page 177 .
Tires − Check the tire pressure
monthly. Examine the tread for
wear and foreign objects. See page
188 .
Lights − Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
and license plate lights monthly.
See page 179 .
05/09/13 20:01:52 31SCV630 0170 Follow the normal maintenance
schedule if the severe driving
conditions specified in the severe
conditions maintenance schedule on
the next page do not apply.
NOTE: If you only OCCASIONALLY
drive under a ‘‘severe’’ condition, you
should follow the normal conditions
maintenance schedule.
165
Maintenance Schedule for Normal Conditions
Service the items listed at the indicated distance (or time, if given).
miles x 1,000
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
km x 1,000
16 32 48 64 80 96 112 128 144 160 176 192 208 224 240
Check oil and coolant at each fuel stop
Check engine oil and coolant
Check inflation and condition once a month
Check tires
Replace engine oil
(Or every 1 year, whichever comes first)
Every 10,000 miles (16,000 km)
Rotate tires (follow pattern on page 190 )
Replace engine oil filter
Check front and rear brakes
Check parking brake adjustment
Inspect the following items:
Tie-rod ends, steering gearbox, and boots
Suspension components
(Or every 1 year, whichever comes first)
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Exhaust system#
Fuel lines and connections#
Inspect drive belts
(Or every 2 years, whichever comes first)
Replace dust and pollen filter
Replace air cleaner element
Replace spark plugs
Inspect valve clearance
(Otherwise adjust only if noisy)
Replace automatic transmission fluid*1
Replace manual transmission fluid
(Or every 6 years, whichever comes first)
Replace rear differential fluid
(Or every 5 years, whichever comes first)
Every 160,000 miles (256,000 km)
Inspect idle speed
At 120,000 miles (192,000 km) or 10 years, then
Replace engine coolant
every 60,000 miles (96,000 km) or 5 years
Every 3 years (independent of mileage)
Replace brake fluid
*1: Replace at 120,000 miles (192,000 km) or 6 years, then every 90,000 miles (144,000 km) or 5 years.
#: See information on maintenance and emissions warranty on page 164 .
Maintenance Schedule for Severe Conditions
05/09/13 20:02:18 31SCV630 0171 Service the items listed at the indicated distance (or time, if given).
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
miles x 1,000
16 32 48 64 80 96 112 128 144 160 176 192 208 224 240
km x 1,000
Check oil and coolant at each fuel stop
Check engine oil and coolant
Check inflation and condition once a month
Check tires
Every 5,000 miles (8,000 km) or every 6 months,
Replace engine oil
whichever comes first
Every 10,000 miles (16,000 km)
Rotate tires (follow pattern on page 190 )
Replace engine oil filter
Check front and rear brakes
Lubricate all hinges, locks and latches
(Or every 1 year, whichever comes first)
Inspect the following items:
Tie rod ends, steering gearbox, and boots
Suspension components, driveshaft boots
Check parking brake adjustment
Inspect the following items:
Brake hoses and lines (including ABS)
(Or every 1 year, whichever comes first)
All fluid levels and condition of fluids
Exhaust system#, fuel lines and connections#
Lights and controls/vehicle underbody
Inspect drive belts
(Or every 2 years, whichever comes first)
Replace dust and pollen filter*1
Every 15,000 miles (24,000 km)
Replace air cleaner element
(Use normal schedule except in dusty condition)
Replace spark plugs
Inspect valve clearance
(Otherwise adjust only if noisy)
Replace automatic transmission fluid*2
Replace manual transmission fluid
(Or every 3 years, whichever comes first)
Replace rear differential fluid
(Or every 4 years, whichever comes first)
Every 160,000 miles (256,000 km)
Inspect idle speed
At 120,000 miles (192,000 km) or 10 years, then
Replace engine coolant
every 60,000 miles (96,000 km) or 5 years
Every 3 years (independent of mileage)
Replace brake fluid
166
Follow the severe maintenance
schedule if you drive your vehicle
MAINLY under one or more of the
following conditions:
Driving less than 5 miles (8 km) per
trip or, in freezing temperatures,
driving less than 10 miles (16 km)
per trip.
Driving in extremely hot [over 90°F
(32°C)] conditions.
Extensive idling or long periods of
stop and go driving, such as a taxi or
a commercial delivery vehicle.
Trailer towing, driving with a loaded
roof rack, or driving in mountainous
conditions.
Driving on muddy, dusty, or de-iced
roads.
Canadian Owners − Follow the maintenance
schedule for severe conditions.
*1 :
See dust and pollen filter on page 185 for
replacement information under special
driving conditions.
*2 :
Replace at 60,000 miles (96,000 km) or 3
years, then every 30,000 miles (48,000
km) or 2 years.
#:
See information on maintenance and
emissions warranty on page 164 .
05/09/13 20:02:25 31SCV630 0172 Maintenance Record (for Normal and Severe Schedules)
You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 165 ) or severe
conditions (page 166 ). Keep the receipts for all work done on your vehicle. Maintenance can also be recorded in your Honda service history booklet.
5,000 mi
8,000 km
Signature or dealer stamp
mi/km
45,000 mi
72,000 km
Date
10,000 mi
16,000 km
mi/km
mi/km
50,000 mi
80,000 km
25,000 mi
40,000 km
mi/km
Date
Date
60,000 mi
96,000 km
(or 3 years)
mi/km
65,000 mi
104,000 km
mi/km
Date
30,000 mi
48,000 km
mi/km
mi/km
mi/km
Date
mi/km
Date
75,000 mi
120,000 km
Date
40,000 mi
64,000 km
(or 2 years)
Date
Date
70,000 mi
112,000 km
Date
35,000 mi
56,000 km
mi/km
Maintenance
mi/km
mi/km
Date
55,000 mi
88,000 km
Date
20,000 mi
32,000 km
(or 1 year)
mi/km
Date
Date
15,000 mi
24,000 km
Signature or dealer stamp
mi/km
Date
80,000 mi
128,000 km
(or 4 years)
mi/km
Date
167
05/09/13 20:02:30 31SCV630 0173 Maintenance Record (for Normal and Severe Schedules)
85,000 mi
136,000 km
Signature or dealer stamp
mi/km
125,000 mi
200,000 km
Date
90,000 mi
144,000 km
mi/km
mi/km
130,000 mi
208,000 km
mi/km
105,000 mi
168,000 km
mi/km
Date
135,000 mi
216,000 km
mi/km
140,000 mi
224,000 km
(or 7 years)
mi/km
145,000 mi
232,000 km
mi/km
mi/km
150,000 mi
240,000 km
168
mi/km
Date
mi/km
Date
155,000 mi
248,000 km
Date
120,000 mi
192,000 km
(or 6 years)
Date
Date
Date
115,000 mi
184,000 km
mi/km
Date
Date
110,000 mi
176,000 km
mi/km
Date
Date
100,000 mi
160,000 km
(or 5 years)
mi/km
Date
Date
95,000 mi
152,000 km
Signature or dealer stamp
mi/km
Date
160,000 mi
256,000 km
(or 8 years)
mi/km
Date
05/09/13 20:02:34 31SCV630 0174 Fluid Locations
ENGINE OIL
FILL CAP
BRAKE FLUID
(Gray cap)
ENGINE OIL
DIPSTICK
(Orange tab)
POWER
STEERING FLUID
(Red cap)
ENGINE
COOLANT
RESERVOIR
AUTOMATIC
TRANSMISSION
FLUID DIPSTICK
(Yellow loop)
RADIATOR CAP
169
Maintenance
WASHER FLUID
(Blue cap)
CLUTCH FLUID
(Manual
Transmission only)
(Gray cap)
05/09/13 20:02:42 31SCV630 0175 Adding Engine Oil
ENGINE OIL FILL CAP
Unscrew and remove the engine oil
fill cap on top of the valve cover.
Pour in the oil slowly and carefully so
you do not spill. Clean up any spills
immediately. Spilled oil could
damage components in the engine
compartment. Install the engine oil
fill cap, and tighten it securely. Wait
a few minutes, and recheck the oil
level. Do not fill above the upper
mark; you could damage the engine.
170
Recommended Engine Oil
Oil is a major contributor to your
engine’s performance and longevity.
Always use a premium-grade 5W-20
detergent oil displaying the API
certification seal. This seal indicates
the oil is energy conserving, and that
it meets the American Petroleum
Institute’s latest requirements.
Honda motor oil is the preferred
5W-20 lubricant for your vehicle. It is
highly recommended that you use
Honda motor oil in your vehicle for
optimum engine protection. make
sure the API certification seal says
‘‘For Gasoline Engines.’’
The oil viscosity or weight is
provided on the container’s label.
5W-20 oil is formulated for yearround protection of your vehicle to
improve cold weather starting and
fuel economy.
API CERTIFICATION SEAL
Ambient Temperature
05/09/13 20:02:51 31SCV630 0176 Adding Engine Oil, Changing the Oil and Filter
Synthetic Oil
You may use a synthetic motor oil if
it meets the same requirements
given for a conventional motor oil: it
displays the API certification seal,
and it is the proper weight. You must
follow the oil and filter change
intervals given on the maintenance
schedule.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service stationtype hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
WASHER
OIL DRAIN BOLT
1. Run the engine until it reaches
normal operating temperature,
then shut it off.
2. Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
CONTINUED
171
Maintenance
Engine Oil Additives
Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability.
Changing the Oil and Filter
Always change the oil and filter
according to the recommendations in
the maintenance schedule. The oil
and filter collect contaminants that
can damage your engine if they are
not removed regularly.
05/09/13 20:03:00 31SCV630 0177 Changing the Oil and Filter
OIL FILTER
4. Install a new oil filter according to
the instructions that come with it.
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten the drain bolt to:
33 lbf·ft (44 N·m , 4.5 kgf·m)
6. Refill the engine with the recommended oil.
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
dealer) is required.
Make sure the oil filter gasket is
not stuck to the engine block.
If it is, remove it before installing
a new oil filter.
172
Engine oil change capacity
(including filter):
4.4 US qt (4.2 )
7. Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine, and check your work.
8. Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
9. Turn off the engine and let it sit
for several minutes, then check
the oil level on the dipstick. If
necessary, add more oil.
Improper disposal of engine oil can be
harmf ul to the environment. If you
change your own oil, please dispose of
the used oil properly. Put it in a sealed
container, and take it to a recycling
center. Do not discard it in a trash bin
or dump it on the ground.
05/09/13 20:03:07 31SCV630 0178 Engine Coolant
Adding Engine Coolant
RESERVE TANK
If Honda antifreeze/coolant is not
available, you may use another
major-brand non-silicate coolant as a
temporary replacement. Make sure it
is a high-quality coolant
recommended for aluminum engines.
Continued use of any non-Honda
coolant can result in corrosion,
causing the cooling system to
malfunction or fail. Have the cooling
system flushed and refilled with
Honda antifreeze/coolant as soon as
possible.
If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
Maintenance
If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to between the
MIN and MAX lines. Inspect the
cooling system for leaks.
Always use Honda Long-life Antifreeze/Coolant Type 2. This coolant
is pre-mixed with 50 percent
antifreeze and 50 percent water.
Never add straight antifreeze or
plain water.
CONTINUED
173
05/09/13 20:03:16 31SCV630 0179 Engine Coolant, Windshield Washers
RADIATOR CAP
3. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.
4. Put the radiator cap back on and
tighten it.
1. When the radiator and engine are
cool, relieve any pressure in the
cooling system by turning the
radiator cap counterclockwise,
without pressing down.
2. Remove the radiator cap by
pushing down and turning
counterclockwise.
174
5. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle’s
cooling system. They may not be
compatible with the coolant or
engine components.
Windshield Washers
Check the fluid level in the
windshield washer reservoir at least
monthly during normal use.
On Canadian models: The low washer
level indicator comes on when the
level is low (see page 57 ).
Fill the reservoir with a good-quality
windshield washer fluid. This
increases the cleaning capability and
prevents freezing in cold weather.
When you refill the reservoir, clean
the edges of the windshield wiper
blades with windshield washer fluid
on a clean cloth. This will help to
condition them.
Do not use engine antif reeze or a
vinegar/water solution in the
windshield washer reservoir. Antif reeze
can damage your vehicle’s paint, while
a vinegar/water solution can damage
the windshield washer pump. Use only
commercially-available windshield
washer f luid.
05/09/13 20:03:27 31SCV630 0180 Automatic Transmission Fluid
DIPSTICK
UPPER
MARK
LOWER
MARK
1. Park the vehicle on level ground.
Shut off the engine.
2. Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
3. Insert the dipstick all the way into
the transmission securely.
4. Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
5. If the level is below the lower
mark, add fluid into the filler hole
to bring it to the upper mark.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spill immediately; it could
damage components in the engine
compartment.
6. Insert the dipstick all the way back
in the transmission.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommendations in the maintenance schedule.
If you are not sure how to add fluid,
contact your dealer.
175
Maintenance
Check the fluid level with the engine
at normal operating temperature.
Always use Honda ATF-Z1
(automatic transmission fluid). If
it’s not available, you may use a
DEXRON III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 by
your dealer as soon as it is
convenient.
05/09/13 20:03:32 31SCV630 0181 Manual Transmission Fluid
WASHER
FILLER BOLT
Correct Level
Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground. Remove the
transmission filler bolt, and carefully
feel inside the bolt hole with your
finger. The fluid level should be up
to the edge of the bolt hole. If it is
not, add Honda manual transmission
fluid (MTF) until it starts to run out
of the hole. Reinstall the filler bolt,
and tighten it securely.
176
If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certification seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as
soon as it is convenient.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommendations in the maintenance schedule.
05/09/13 20:03:43 31SCV630 0182 Brake and Clutch Fluid
Check the brake fluid level in the
reservoirs monthly.
Brake Fluid
Clutch Fluid
Manual Transmission only
MAX
MAX
Replace the brake fluid according to
the time recommendation in the
maintenance schedule.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.
Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.
The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.
MIN
The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If it is not, add
brake fluid to bring it up to that level.
Use the same fluid specified for the
brake system.
Low fluid can indicate a leak in the
clutch system. Have this system
inspected as soon as possible.
177
Maintenance
Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.
MIN
05/09/13 20:03:51 31SCV630 0183 Power Steering Fluid, Cleaning the Body Panels
Power Steering Fluid
UPPER LEVEL
Always use Honda Power Steering
Fluid. You may use another power
steering fluid as an emergency
replacement, but have the power
steering system flushed and refilled
with Honda PSF as soon as possible.
A low power steering fluid level can
indicate a leak in the system. Check
the fluid level frequently, and have
the system inspected as soon as
possible.
LOWER LEVEL
Check the level on the side of the
reservoir when the engine is cold.
The fluid should be between the
UPPER LEVEL and LOWER LEVEL.
If not, add power steering fluid to the
UPPER LEVEL.
Pour the fluid slowly and carefully so
you do not spill any. Clean up any
spill immediately; it could damage
components in the engine
compartment.
178
Turning the steering wheel to f ull lef t
or right lock and holding it there can
damage the power steering pump.
Cleaning the Body Panels
If equipped with body panels
To clean the gray composite body
panels, wash them with soap and
water only. Do not apply wax to the
panels; it will cause discoloration.
05/09/13 20:03:59 31SCV630 0184 Lights
Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or other qualified mechanic.
Replacing a Headlight Bulb
Your vehicle has halogen headlight
bulbs. Handle it by its steel base and
protect the glass from contact with
your skin or hard objects. If you
touch the glass, clean it with
denatured alcohol and a clean cloth.
AIR INTAKE DUCT
1. Open the hood.
If you need to change the
headlight bulb on the driver’s side,
remove the front end of the air
intake duct by pulling it out.
CONTINUED
179
Maintenance
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
05/09/13 20:04:09 31SCV630 0185 Lights
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
Replacing a Front Parking/Turn
Signal Light Bulb
6. Reinstall the rubber weather seal.
Make sure it is right side up; it is
marked ‘‘TOP.’’
7. Push the electrical connector onto
the new bulb.
2. Remove the electrical connector
from the bulb by pulling the
connector straight back.
3. Remove the rubber weather seal
by pulling on the tab.
4. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
180
8. (Driver’s side)
Install the front end of the air
intake duct.
1. The front parking/turn signal light
is next to the headlight bulb. On
the driver’s side, remove the front
end of the air intake duct by
pulling it out (see page 179 ).
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
05/09/13 20:04:19 31SCV630 0186 Lights
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Replacing a Front Side Marker
Light Bulb
SCREWDRIVER
LIGHT ASSEMBLY
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Test the lights to make sure the
new bulb is working.
LIGHT
ASSEMBLY
CLOTH
1. Place a cloth between the trim of
the lens and the body, at the top of
the lens. Remove the front side
marker light assembly by carefully
prying on the trim of the lens with
a small flat-tip screwdriver.
SOCKET
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
CONTINUED
181
Maintenance
6. (Driver’s side)
Install the front end of the air
intake duct.
05/09/13 20:04:28 31SCV630 0187 Lights
4. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Replacing Rear Bulbs
SCREW
SOCKET
SOCKET
5. Turn on the lights to make sure
the new bulb is working.
6. Put the light assembly back into
the body, bottom first. Push on the
top edge until it snaps into place.
SCREW
TAILLIGHT ASSEMBLY
1. Open the hatch and the tailgate.
Remove the two mounting screws
with a Phillips-head screwdriver,
and remove the taillight assembly
from the body by pulling it back.
2. Determine which of the three
bulbs is burned out: brake/
taillight, turn signal light or backup light.
182
SOCKET
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
05/09/13 20:04:36 31SCV630 0188 Lights
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Replacing a Rear License Plate
Bulb
LENS
6. Test the lights to make sure the
new bulb is working.
7. When reinstalling the taillight
assembly, first place the two pins
in the holes in place. Tighten the
two mounting bolts.
HOUSING
BULB
CLOTH
LENS
1. Place a cloth and insert a small
flat-tip screwdriver between the
left edge of the lens and the
housing. The lens will come down.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Maintenance
SCREWDRIVER
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
183
05/09/13 20:04:45 31SCV630 0189 Lights
4. Test the lights to make sure the
new bulb is working.
Replacing a High-mount Brake
Light Bulb
5. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
6. Put the cover back onto the light
assembly. Push it on until it locks
in place.
TAB
COVER
TAB
1. Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
184
SOCKET
BULB
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
05/09/13 20:04:51 31SCV630 0190 Cleaning the Seat Belts, Dust and Pollen Filter
Cleaning the Seat Belts
LOOP
Dust and Pollen Filter
This filter removes the dust and
pollen that is brought in from the
outside through the heating and
cooling system.
Have your dealer replace this filter
every 30,000 miles (48,000 km)
under normal conditions. It should
be replaced every 15,000 miles
(24,000 km) if you drive primarily in
urban areas that have high
concentrations of soot in the air, or if
the flow from the heating and
cooling system becomes less than
usual.
185
Maintenance
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
05/09/13 20:05:00 31SCV630 0191 Wiper Blades
Check the condition of the wiper
blades at least every 6 months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
HOLDER
1. Front:
Raise the wiper arm off the
windshield.
BLADE
LOCK TAB
Do not open the hood when the wiper
arms are raised, or you will damage
the hood and the arms.
Rear:
Raise the wiper arm off the hatch
glass and hold it.
2. Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
3. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
186
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
05/09/13 20:05:11 31SCV630 0192 Wiper Blades, Tires
BLADE
Tires
To safely operate your vehicle, your
tires must be the proper type and
size, in good condition with adequate
tread, and correctly inflated.
The following pages give more
detailed information on how to take
care of your tires and what to do
when they need to be replaced.
Inflation Guidelines
Keeping the tires properly inflated
provides the best combination of
handling, tread life, and riding
comfort.
Underinflated tires wear unevenly,
adversely affect handling and fuel
economy, and are more likely to
fail from being overheated.
REINFORCEMENT
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm down against
the windshield or the hatch glass.
Using tires that are excessively
worn or improperly inflated can
cause a crash in which you can
be seriously hurt or killed.
Follow all instructions in this
owner’s manual regarding tire
inflation and maintenance.
We recommend that you visually
check your tires everyday. If you
think a tire might be low, check it
immediately with a tire gauge.
CONTINUED
187
Maintenance
5. Slide the new wiper blade into the
holder until the tabs lock.
Overinflated tires can make your
vehicle ride more harshly, are
more prone to damage from road
hazards, and wear unevenly.
05/09/13 20:05:21 31SCV630 0193 Tires
Use a gauge to measure the air
pressure in each tire at least once a
month. Even tires that are in good
condition may lose 1 to 2 psi (10 to
20 kPa, 0.1 to 0.2 kgf/cm ) per
month. Remember to check the
spare tire at the same time.
Check the air pressures when the
tires are cold. This means the
vehicle has been parked for at least 3
hours, or driven less than 1 mile (1.6
km). Add or release air, if needed, to
match the recommended cold tire
pressures.
If you check air pressures when the
tires are hot (driven for several
miles), you will see readings 4 to 6
psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm )
higher than the cold readings. This
is normal. Do not let air out to match
the recommended cold air pressure.
The tire will be underinflated.
You should get your own tire
pressure gauge and use it whenever
you check your tire pressures. This
will make it easier for you to tell if a
pressure loss is due to a tire problem
and not due to a variation between
gauges.
While tubeless tires have some
ability to self-seal if they are
punctured, you should look closely
for punctures if a tire starts losing
pressure.
Recommended Tire Pressures for
Normal Driving
The following chart shows the
recommended cold tire pressures for
most normal driving conditions and
speed.
Tire Size
P215/70R16 99S
Cold Tire Pressure
for Normal Driving
Front:
32 psi (220 kPa ,
2.2 kgf/cm )
Rear:
34 psi (235 kPa ,
2.4 kgf/cm )
The compact spare tire pressure is:
60 psi (420 kPa , 4.2 kgf/cm )
For convenience, the recommended
tire sizes and cold tire pressures are
on a label on the driver’s doorjamb.
For additional technical information
about your tires, see page 224 .
188
05/09/13 20:05:30 31SCV630 0194 Tires
Tire Inspection
Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.
INDICATOR LOCATION MARKS
You should look for:
Bumps or bulges in the tread or
side of the tire. Replace the tire if
you find either of these conditions.
Cuts, splits, or cracks in the side
of the tire. Replace the tire if you
can see fabric or cord.
Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a
band 1/2 inch (12.7 mm) wide across
the tread. This shows there is less
than 1/16 inch (1.6 mm) of tread left
on the tire. A tire that is this worn
gives very little traction on wet roads.
You should replace the tire if you can
see the tread wear indicator in three
or more places on the tire.
Have your dealer check the tires if
you feel a consistent vibration while
driving. A tire should always be
rebalanced if it is removed from the
wheel. When you have new tires
installed, make sure they are
balanced. This increases riding
comfort and tire life. For best results,
have the installer perform a dynamic
balance.
For vehicles with aluminum wheels:
Improper wheel weights can damage
your vehicle’s aluminum wheels. Use
only genuine Honda wheel weights f or
balancing.
189
Maintenance
Excessive tread wear.
TREAD WEAR INDICATORS
Tire Maintenance
In addition to proper inflation,
correct wheel alignment helps to
decrease tire wear. If you find a tire
is worn unevenly, have your dealer
check the wheel alignment.
05/09/13 20:05:37 31SCV630 0195 Tires
Tire Rotation
Front
Front
(Non-directional Tires (Directional Tires
and Wheels)
and Wheels)
To help increase tire life and
distribute wear more evenly, rotate
the tires every 10,000 miles (16,000
km). Move the tires to the positions
shown in the illustration each time
they are rotated. If you purchase
directional tires, rotate only front-toback.
190
Replacing Tires and Wheels
Replace your tires with radial tires of
the same size, load range, speed
rating, and maximum cold tire
pressure rating (as shown on the
tire’s sidewall).
It is best to replace all four tires at
the same time. If that is not possible
or necessary, replace the two front
tires or two rear tires as a pair.
Replacing just one tire can seriously
affect your vehicle’s handling.
Mixing radial and bias-ply tires on
your vehicle can reduce braking
ability, traction, and steering
accuracy. Using tires of a different
size or construction can cause the
ABS to work inconsistently.
If you ever replace a wheel, make
sure that the wheel’s specifications
match those of the original wheels.
Replacement wheels are available at
your dealer.
05/09/13 20:05:46 31SCV630 0196 Tires
Installing improper tires on your
vehicle can affect handling and
stability. This can cause a crash
in which you can be seriously
hurt or killed.
Always use the size and type of
tires recommended in this
owner’s manual.
Wheel and Tire Specifications
Wheels:
16 x 6 1/2JJ
16 x 6 1/2
Tires:
P215/70R16 99S
See page 224 for DOT tire quality
grading information, and page
226 for tire size and labeling
information.
Winter Driving
Tires marked ‘‘M + S’’ or ‘‘All
Season’’ on the sidewall have an allweather tread design suitable for
most winter driving conditions.
For the best performance in snowy
or icy conditions, you should install
snow tires or tire chains. They may
be required by local laws under
certain conditions.
191
Maintenance
Snow Tires
If you mount snow tires on your
vehicle, make sure they are radial
tires of the same size and load range
as original tires. Mount snow tires on
all four wheels. The traction
provided by snow tires on dry roads
may be lower than your original tires.
Check with the tire dealer for
maximum speed recommendations.
05/09/13 20:05:51 31SCV630 0197 Tires
Tire Chains
Because your vehicle has limited tire
clearance, use only SAE Class ‘‘S’’
cable-type traction devices, with
rubber chain tensioners, on the front
tires. Use traction devices only when
required by driving conditions or
local laws. Make sure they are the
correct size for your tires. Metal linktype ‘‘chains’’ should not be used.
When installing cables, follow the
manufacturer’s instructions, and
mount them as tight as you can.
Make sure they are not contacting
the brake lines or suspension. Drive
slowly with them installed. If you
hear them coming into contact with
the body or chassis, stop and
investigate. Remove them as soon as
you begin driving on cleared roads.
192
Traction devices that are the wrong
size or improperly installed can
damage your vehicle’s brake lines,
suspension, body, and wheels. Stop
driving if they are hitting any part of
the vehicle.
05/09/13 20:05:57 31SCV630 0198 Checking the Battery
NEGATIVE TERMINAL
TEST INDICATOR
WINDOW
POSITIVE TERMINAL
If additional battery maintenance is
needed, see your dealer or a
qualified technician.
WARNING: Battery posts,
terminals, and related accessories
contain lead and lead compounds.
Wash your hands after handling.
If you need to connect the battery to
a charger, disconnect both cables to
prevent damaging your vehicle’s
electrical system. Always disconnect
the negative (−) cable first, and
reconnect it last.
The battery gives off explosive
hydrogen gas during normal
operation.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
Wear protective clothing and a
face shield, or have a skilled
mechanic do the battery
maintenance.
193
Maintenance
Check the condition of the battery
monthly by looking at the test
indicator window. The label on the
battery explains the test indicator’s
colors.
Check the terminals for corrosion (a
white or yellowish powder). To
remove it, cover the terminals with a
solution of baking soda and water. It
will bubble up and turn brown. When
this stops, wash it off with plain
water. Dry off the battery with a
cloth or paper towel. Coat the
terminals with grease to help prevent
future corrosion.
05/09/13 20:06:07 31SCV630 0199 Vehicle Storage
If you need to park your vehicle for
an extended period (more than 1
month), there are several things you
should do to prepare it for storage.
Proper preparation helps prevent
deterioration and makes it easier to
get your vehicle back on the road. If
possible, store your vehicle indoors.
Block the rear wheels.
If the vehicle is to be stored for a
longer period, it should be
supported on jackstands so the
tires are off the ground.
Fill the fuel tank.
Leave one window open slightly (if
the vehicle is being stored
indoors).
Change the engine oil and filter.
Disconnect the battery.
Wash and dry the exterior
completely.
Support the front and rear wiper
blade arms with a folded towel or
rag so they do not touch the
windshield.
Clean the interior. Make sure the
carpeting, floor mats, etc., are
completely dry.
Leave the parking brake off. Put
the transmission in reverse
(manual) or Park (automatic).
194
To minimize sticking, apply a
silicone spray lubricant to all door
and tailgate seals. Also, apply a
vehicle body wax to the painted
surfaces that mate with the door
and tailgate seals.
Cover the vehicle with a
‘‘breathable’’ cover, one made
from a porous material such as
cotton. Non-porous materials, such
as plastic sheeting, trap moisture,
which can damage the paint.
If possible, periodically run the
engine until it reaches full
operating temperature (the
cooling fan cycles twice).
Preferably, do this once a month.
If you store your vehicle for 12
months or longer, have your dealer
perform the inspections called for in
the 24 months/30,000 miles
(48,000 km) maintenance schedule
(normal conditions) as soon as you
take it out of storage (see page 165 ).
The replacements called for in the
maintenance schedule are not
needed unless the vehicle has
actually reached that time or mileage.
05/09/13 20:06:10 31SCV630 0200 Taking Care of the Unexpected
This section covers the more
common problems that motorists
experience with their vehicles. It
gives you information about how to
safely evaluate the problem and what
to do to correct it. If the problem has
stranded you on the side of the road,
you may be able to get going again.
If not, you will also find instructions
on getting your vehicle towed.
Compact Spare Tire....................... 196
Changing a Flat Tire ..................... 197
If the Engine Won’t Start .............. 203
Jump Starting ................................. 205
If the Engine Overheats ............... 207
Low Oil Pressure Indicator .......... 209
Charging System Indicator........... 209
Malfunction Indicator Lamp ........ 210
Brake System Indicator ................ 211
Fuses ............................................... 212
Fuse Locations ............................... 215
Emergency Towing ....................... 217
Taking Care of the Unexpected
195
05/09/13 20:06:17 31SCV630 0201 Compact Spare Tire
Use the compact spare tire as a
temporary replacement only. Get
your regular tire repaired or replaced,
and put it back on your vehicle as
soon as you can.
Check the inflation pressure of the
compact spare tire every time you
check the other tires. It should be
inflated to:
60 psi (420 kPa , 4.2 kgf/cm )
Follow these precautions:
Never exceed 50 mph (80 km/h).
This tire gives a harsher ride and
less traction on some road surfaces. Use greater caution while
driving.
Do not mount snow chains on the
compact spare tire.
Do not use your compact spare
tire on another vehicle unless it is
the same make and model.
On models with manual
transmission, do not drive for a
long period with the compact
spare tire mounted on a front
wheel; it will damage the limited
slip differential.
196
INDICATOR LOCATION MARK
TREAD WEAR INDICATOR BAR
Replace the tire when you can see
the tread wear indicator bars. The
replacement should be the same size
and design tire, mounted on the
same wheel. The spare tire is not
designed to be mounted on a regular
wheel, and the spare wheel is not
designed for mounting a regular tire.
05/09/13 20:06:26 31SCV630 0202 Changing a Flat Tire
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.
1. Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.
TOOLS
If you are towing a trailer, unhitch
the trailer.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
SPARE TIRE
JACK
3. Open the hatch and the tailgate.
4. The spare tire, jack, and tools are
under the cargo area floor.
CONTINUED
197
Taking Care of the Unexpected
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
2. Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
05/09/13 20:06:33 31SCV630 0203 Changing a Flat Tire
JACK
WHEEL NUTS
WHEEL NUT WRENCH
5. Push the rear edge of the handle
to raise the handle loop and pull up
the loop to raise the cargo area
floor.
198
6. Unscrew the wing bolt, and take
the spare tire out of the cargo area.
7. Remove the tools and the jack. To
remove the jack, turn the jack’s
end bracket counterclockwise to
loosen it.
8. Loosen the five wheel nuts 1/2
turn with the wheel nut wrench.
05/09/13 20:06:40 31SCV630 0204 Changing a Flat Tire
EXTENSION
WHEEL NUTS
WHEEL NUTS
JACKING POINTS
10.Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
WHEEL COVER
U.S. LX and Canadian Base models
Remove the wheel nuts and wheel
cover. The wheel nuts will be very
hot if you were recently driving. The
wheel cover cannot be removed
without first removing the wheel
nuts. Do not attempt to forcibly pry
the wheel cover off with a
screwdriver or other tool.
CONTINUED
199
Taking Care of the Unexpected
9. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
WHEEL NUT WRENCH
05/09/13 20:06:46 31SCV630 0205 Changing a Flat Tire
13. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
BRAKE HUB
11. Remove the wheel nuts and the
flat tire. Temporarily place the flat
tire on the ground with the outside
surface of the wheel facing up.
200
12. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
05/09/13 20:06:55 31SCV630 0206 Changing a Flat Tire
16.Store the jack in its holder. Turn
the jack’s end bracket to lock it in
place. Store the tools.
ARM
17.Remove the center cap from the
flat tire, and store it in the spare
tire well.
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
14. Lower the vehicle to the ground,
and remove the jack.
18.Remove the wing bolt on the spare
tire mount, and pivot the arm 90°
to the upright position. Then
tighten the wing bolt securely.
CONTINUED
201
Taking Care of the Unexpected
15. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
Store the wheel, jack, and tools
securely before driving.
WING BOLT
05/09/13 20:07:01 31SCV630 0207 Changing a Flat Tire
22.Secure the flat tire by screwing
the wing bolt to the spare tire
mount through the hole in the
cargo area floor.
WING BOLT
SPACER CONE
19.Remove the small round plug from
the cargo area floor by pushing it
from the back side to make a hole.
Store the removed plug in a place
you can easily remember.
202
20.Reinstall the cargo area floor.
Place the flat tire face down on the
cargo area floor.
21.Align the center of the flat tire
with the hole in the cargo area
floor. Remove the spacer cone
from the wing bolt, turn it over,
and put it back on the bolt.
05/09/13 20:07:10 31SCV630 0208 If the Engine Won’t Start
Diagnosing why the engine won’t
start falls into two areas, depending
on what you hear when you turn the
ignition switch to the START (III)
position:
You hear nothing, or almost
nothing. The engine’s starter
motor does not operate at all, or
operates very slowly.
Check these things:
Check the transmission interlock.
If you have a manual transmission,
the clutch pedal must be pushed
all the way to the floor or the
starter will not operate. With an
automatic transmission, the shift
lever must be in Park or neutral.
Turn the ignition switch to the ON
(II) position. Turn on the
headlights, and check their
brightness. If the headlights are
very dim or do not come on at all,
the battery is discharged (see
Jump Starting on page 205 ).
Turn the ignition switch to the
START (III) position. If the
headlights do not dim, check the
condition of the fuses. If the fuses
are OK, there is probably
something wrong with the
electrical circuit for the ignition
switch or starter motor. You will
need a qualified technician to
determine the problem (see
Emergency Towing on page 217 ).
If the headlights dim noticeably or
go out when you try to start the
engine, either the battery is discharged or the connections are
corroded. Check the condition of the
battery and terminal connections
(see page 193 ). You can then try
jump starting the vehicle from a
booster battery (see page 205 ).
CONTINUED
203
Taking Care of the Unexpected
You can hear the starter motor
operating normally, or the starter
motor sounds like it is spinning
faster than normal, but the engine
does not start up and run.
Nothing Happens or the Starter
Motor Operates Very Slowly
When you turn the ignition switch to
the START (III) position, you do not
hear the normal noise of the engine
trying to start. You may hear a
clicking sound or series of clicks, or
nothing at all.
05/09/13 20:07:16 31SCV630 0209 If the Engine Won’t Start
The Starter Operates Normally
In this case, the starter motor’s
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page 55 ).
Are you using the proper starting
procedure? Refer to Starting the
Engine on page 140 .
204
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page 212 ).
If you find nothing wrong, you will
need a qualified technician to find
the problem (see Emergency
Towing on page 217 ).
05/09/13 20:07:25 31SCV630 0210 Jump Starting
Although this seems like a simple
procedure, you should take several
precautions.
A battery can explode if you do
not follow the correct procedure,
seriously injuring anyone
nearby.
Keep all sparks, open flames,
and smoking materials away
from the battery.
If a battery sits in extreme cold, the
electrolyte inside can f reeze.
Attempting to jump start with a f rozen
battery can cause it to rupture.
2. Turn off all the electrical accessories: heater, A/C, stereo system,
lights, etc. Put the transmission in
neutral or Park, and set the
parking brake.
3. Connect one jumper cable to the
positive (+) terminal on your
battery. Connect the other end to
the positive (+) terminal on the
booster battery.
BOOSTER BATTERY
The numbers in the illustration show
you the order to connect the jumper
cables.
CONTINUED
205
Taking Care of the Unexpected
You cannot start your vehicle with an
automatic transmission by pushing
or pulling it.
To Jump Start Your Vehicle:
1. Open the hood, and check the
physical condition of the battery.
In very cold weather, check the
condition of the electrolyte. If it
seems slushy or frozen, do not try
jump starting until it thaws.
05/09/13 20:07:31 31SCV630 0211 Jump Starting
5. If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
6. Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
4. Connect the second jumper cable
to the negative (−) terminal on
the booster battery. Connect the
other end to the grounding strap
on your vehicle as shown. Do not
connect this jumper cable to any
other part of the engine.
206
7. Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
05/09/13 20:07:39 31SCV630 0212 If the Engine Overheats
The pointer of the vehicle’s
temperature gauge should stay in
the midrange. If it climbs to the red
mark, you should determine the
reason (hot day, driving up a steep
hill, etc.).
If the vehicle overheats, you should
take immediate action. The only
indication may be the temperature
gauge climbing to or above the red
mark. Or you may see steam or
spray coming from under the hood.
Do not open the hood if steam
is coming out.
1. Safely pull to the side of the road.
Put the transmission in neutral
(manual) or Park (automatic), and
set the parking brake. Turn off all
the accessories, and turn on the
hazard indicators.
4. If the temperature gauge stays at
the red mark, turn off the engine.
2. If you see steam and/or spray
coming from under the hood, turn
off the engine. Wait until you see
no more signs of steam or spray,
then open the hood.
CONTINUED
207
Taking Care of the Unexpected
Driving with the temperature gauge
pointer at the red mark can cause
serious damage to the engine.
Steam and spray from an
overheated engine can
seriously scald you.
3. If you do not see steam or spray,
leave the engine running, and
watch the temperature gauge. If
the high heat is due to overloading,
the engine should start to cool
down almost immediately. If it
does, wait until the temperature
gauge comes down to the midpoint,
then continue driving.
05/09/13 20:07:46 31SCV630 0213 If the Engine Overheats
5. Look for any obvious coolant leaks,
such as a split radiator hose.
Everything is still extremely hot,
so use caution. If you find a leak, it
must be repaired before you
continue driving (see Emergency
Towing on page 217 ).
6. If you don’t find an obvious leak,
check the coolant level in the
radiator reserve tank (see page
128 ).
7. If there was no coolant in the
reserve tank, you may need to add
coolant to the radiator. Let the
engine cool down until the pointer
reaches the middle of the
temperature gauge or lower
before checking the radiator.
208
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
8. Using gloves or a large heavy
cloth, turn the radiator cap
counterclockwise, without pushing
down, to the first stop. After the
pressure releases, push down on
the cap, and turn it until it comes
off.
9. Start the engine, and set the
temperature control dial to
maximum heat. Add coolant to the
radiator up to the base of the filler
neck. If you do not have the
proper coolant mixture available,
you can add plain water.
Remember to have the cooling
system drained and refilled with
the proper mixture as soon as you
can.
10.Put the radiator cap back on
tightly. Run the engine, and watch
the temperature gauge. If it goes
back to the red mark, the engine
needs repair (see Emergency
Towing on page 217 ).
11.If the temperature stays normal,
check the coolant level in the
radiator reserve tank. If it has
gone down, add coolant to the
MAX mark. Put the cap back on
tightly.
05/09/13 20:07:55 31SCV630 0214 Low Oil Pressure Indicator, Charging System Indicator
1. Safely pull off the road, and shut
off the engine. Turn on the hazard
warning lights.
Running the engine with low oil
pressure can cause serious mechanical
damage almost immediately. Turn of f
the engine as soon as you can saf ely get
the vehicle stopped.
3. If necessary, add oil to bring the
level back to the full mark on the
dipstick (see page 170 ).
2. Let the vehicle sit for a minute.
Open the hood, and check the oil
level (see page 128 ). An engine
very low on oil can lose pressure
during cornering and other driving
maneuvers.
4. Start the engine, and watch the oil
pressure indicator. If it does not go
out within 10 seconds, turn off the
engine. There is a mechanical
problem that needs to be repaired
before you can continue driving
(see Emergency Towing on page
217 ).
Charging System Indicator
If the charging system
indicator comes on brightly
when the engine is running, the
battery is not being charged.
Immediately turn off all electrical
accessories. Try not to use other
electrically operated controls such as
the power windows. Keep the engine
running; starting the engine will
discharge the battery rapidly.
Go to a service station or garage
where you can get technical
assistance.
Taking Care of the Unexpected
Low Oil Pressure Indicator
This indicator should never
come on when the engine is
running. If it starts flashing or stays
on, the oil pressure has dropped very
low. Serious engine damage is
possible and you should take
immediate action.
209
05/09/13 20:08:01 31SCV630 0215 Malfunction Indicator Lamp
If this indicator comes on
while driving, it means one
of the engine’s emissions control
systems may have a problem. Even
though you may feel no difference in
your vehicle’s performance, it can
reduce your fuel economy and cause
increased emissions. Continued
operation may cause serious damage.
If you have recently refueled your
vehicle, the indicator coming on
could be due to a loose or missing
fuel fill cap. Tighten the cap until it
clicks at least once.
Tightening the cap will not turn the
indicator off immediately; it can take
several days of normal driving.
210
If the indicator comes on repeatedly,
even though it may turn off as you
continue driving, have the vehicle
checked by the dealer as soon as
possible.
If you keep driving with the
malf unction indicator lamp on, you can
damage your vehicle’s emissions
controls and engine. Those repairs may
not be covered by your vehicle’s
warranties.
Readiness Codes
Your vehicle has certain ‘‘readiness
codes’’ that are part of the on-board
diagnostics for the emissions
systems. In some states, part of the
emissions testing is to make sure
these codes are set. If they are not
set, the test cannot be completed.
If your vehicle’s battery has been
disconnected or gone dead, these
codes are erased. It can take several
days of driving under various
conditions to set the codes again.
To check if they are set, turn the
ignition switch to the ON (II)
position, without starting the engine.
The malfunction indicator lamp will
come on for 20 seconds. If it then
goes off, the readiness codes are set.
If it blinks five times, the readiness
codes are not set. If possible, do not
take your vehicle for a state
emissions test until the readiness
codes are set. Refer to State
Emissions Testing for more
information (see page 230 ).
05/09/13 20:08:08 31SCV630 0216 Brake System Indicator
The brake system indicator
normally comes on when
you turn the ignition switch
to the ON (II) position, and
Canada as a reminder to check the
parking brake. It will stay
on if you do not fully
release the parking brake.
U.S.
If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see Emergency
Towing on page 217 ).
Taking Care of the Unexpected
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page 177 ).
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system’s dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.
211
05/09/13 20:08:14 31SCV630 0217 Fuses
UNDER-HOOD
INTERIOR
TAB
KNOBS
The vehicle’s fuses are located in
two fuse boxes. The under-hood fuse
box is located in the engine
compartment on the driver’s side. To
open it, push the tabs as shown.
The interior fuse box is underneath
the steering column. To remove the
fuse box lid, turn the knobs
counterclockwise and pull the lid out
of its hinges.
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages 215 and 216 , or the
diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. Remove the cover from the fuse
box.
212
05/09/13 20:08:21 31SCV630 0218 Fuses
FUSE
BLOWN
BLOWN
4. Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse box by
pulling out each one with the fuse
puller provided in the under-hood
fuse box.
If you replace the blown fuse with a
spare fuse that has a lower rating, it
might blow out again. This does not
indicate anything wrong. Replace the
fuse with one of the correct rating as
soon as you can.
5. Look for a blown wire inside the
fuse. If it is blown, replace it with
one of the spare fuses of the same
rating or lower.
CONTINUED
213
Taking Care of the Unexpected
3. Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Remove the screws with a
Phillips-head screwdriver.
If you cannot drive the vehicle
without fixing the problem, and you
do not have a spare fuse, take a fuse
of the same rating or a lower rating
from one of the other circuits. Make
sure you can do without that circuit
temporarily (such as the accessory
power socket or radio).
05/09/13 20:08:26 31SCV630 0219 Fuses
Replacing a f use with one that has a
higher rating greatly increases the
chances of damaging the electrical
system. If you do not have a
replacement f use with the proper rating
f or the circuit, install one with a lower
rating.
6. If the replacement fuse of the
same rating blows in a short time,
there is probably a serious
electrical problem in your vehicle.
Leave the blown fuse in that
circuit and have your vehicle
checked by a qualified mechanic.
On U.S. EX models and
Canadian Y package
If the radio fuse is removed, the
audio system will disable itself. The
next time you turn on the radio you
will see ‘‘CODE’’ in the frequency
display. Use the preset buttons to
enter the five-digit code (see page
116 ).
214
05/09/13 20:08:33 31SCV630 0220 Fuse Locations
INTERIOR FUSE BOX
No. Amps.
1
2
3
4
5
15 A
15 A
10 A
10 A
−
Circuits Protected
Ignition Coil
+B ACC
+B Daytime running lights*2
IG1 ACG
Not Used
7.5 A
20 A
7.5 A
10 A
7.5 A
7.5 A
7.5 A
10 A
10 A
20 A
−
15 A
15 A
7.5 A
20 A
−
20 A
20 A
−
−
Power Window Relay
AMP
Accessory, Radio
Rear Wiper
Meter
ABS
IG2 Daytime running lights*2
SRS
Remote Control Mirrors
LAF Heater
Not Used
Fuel Pump
Front Accessory Power Socket
Turn Signal Lights
Front Wiper
Not Used
Passenger’s Power Window
Driver’s Power Window
Not Used
Not Used
*1 : If equipped
*2 : Canadian models
CONTINUED
215
Taking Care of the Unexpected
No. Amps.
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Circuits Protected
05/09/13 20:08:37 31SCV630 0221 Fuse Locations
UNDER-HOOD FUSE BOX
No. Amps.
1
30 A
2
15 A
3
7.5 A
4
20 A
5
15 A
6
15 A
7
15 A
−
8
9
10 A
10
30 A
11
20 A
12
40 A
13
40 A
14
40 A
15
15 A
16
15 A
17
15 A
18
30 A
19 100 A
20
50 A
21−25 7.5A−30A
216
Circuits Protected
Condenser Fan
Small Light
Interior Light
Cooling Fan Motor
Hazard
IGP
Horn, Stop
Not Used
Back Up
ABS Motor
Rear Defroster
Heater Motor
Power Window Main
Option
Left Headlight
Door Lock
Right Headlight
ABS MTR FSR
Battery
IG1 Main
Spare Fuses
05/09/13 20:08:42 31SCV630 0222 Emergency Towing
If your vehicle needs to be towed,
call a professional towing service or
organization. Never tow your vehicle
with just a rope or chain. It is very
dangerous.
Towing with only two tires on the
ground will damage parts of the 4WD
system. It should be transported on a
f lat-bed truck or trailer.
The only way you can safely tow
your vehicle is with flat-bed
equipment. The operator will load
your vehicle on the back of a truck.
Any other method of towing will
damage the drive system. When you
contact the towing agency, inform
them a flat-bed is required.
Taking Care of the Unexpected
217
05/09/13 20:08:44 31SCV630 0223 218
05/09/13 20:08:48 31SCV630 0224 Technical Information
The diagrams in this section give
you the dimensions and capacities of
your vehicle, and the locations of the
identification numbers. It also
includes information you should
know about your vehicle’s tires and
emissions control systems.
Identification Numbers ................. 220
Specifications ................................. 222
DOT Tire Quality Grading
(U.S. Vehicles) ....................... 224
Uniform Tire Quality
Grading ................................... 224
Treadwear .................................. 224
Traction....................................... 224
Temperature .............................. 225
Tire Labeling .................................. 226
Emissions Controls........................ 227
The Clean Air Act ...................... 227
Crankcase Emissions Control
System..................................... 227
Evaporative Emissions Control
System..................................... 227
Onboard Refueling Vapor
Recovery ................................. 227
Exhaust Emissions Controls .... 228
PGM-FI System ..................... 228
Ignition Timing Control
System................................. 228
Three Way Catalytic
Converter ............................ 228
Replacement Parts..................... 228
Three Way Catalytic Converter ... 229
State Emissions Testing ............... 230
Technical Information
219
05/09/13 20:08:52 31SCV630 0225 Identification Numbers
Your vehicle has several identifying
numbers located in various places.
VEHICLE IDENTIFICATION NUMBER
The vehicle identification number
(VIN) is the 17-digit number your
dealer uses to register your vehicle
for warranty purposes. It is also
necessary for licensing and insuring
your vehicle. The easiest place to
find the VIN is on a plate fastened to
the top of the dashboard. You can
see it by looking through the
windshield on the driver’s side. It is
also on the certification label
attached to the driver’s doorjamb
(front edge of rear door), and is
stamped on the engine compartment
bulkhead. The VIN is also provided
in bar code on the certification label.
CERTIFICATION LABEL
220
05/09/13 20:08:56 31SCV630 0226 Identification Numbers
The engine number is stamped into
the engine block.
AUTOMATIC TRANSMISSION NUMBER
The transmission number is on a
label on top of the transmission.
Technical Information
ENGINE NUMBER
MANUAL TRANSMISSION NUMBER
221
05/09/13 20:09:14 31SCV630 0227 Specifications
Dimensions
Length
Width
Height
Wheelbase
Track
Front
Rear
Weights
Gross vehicle weight rating
Engine
Type
Bore x Stroke
Displacement
Compression ratio
Spark plugs
Capacities
Fuel tank
Engine oil
222
169.3 in (4,300 mm)
71.5 in (1,815 mm)
70.4 in (1,788 mm)
101.4 in (2,575 mm)
62.1 in (1,577 mm)
62.3 in (1,582 mm)
See the certification label attached
to the driver’s doorjamb (front
edge of rear door).
Water cooled 4-stroke DOHC
VTEC 4-cylinder gasoline engine
3.43 x 3.90 in (87.0 x 99.0 mm)
144 cu-in (2,354 cm )
9.7 : 1
IZFR6K-11
NGK:
DENSO: SKJ20DR-M11
Approx.
15.9 US gal (60 )
Change*1
Including filter
Without filter
Total
4.4 US qt (4.2 )
4.2 US qt (4.0 )
5.6 US qt (5.3 )
Engine
coolant
Automatic Transmission
Change*2
Total
Manual Transmission
Change*2
Total
Automatic
Change
transmission
4WD
fluid
2WD
Total
4WD
2WD
Manual
Change
transmission Total
fluid
4WD
2WD
Rear
Change
differential
Total
fluid (4WD)
Windshield
washer
reservoir
1.43 US gal (5.4 )
1.88 US gal (7.1 )
1.45 US gal (5.5 )
1.90 US gal (7.2 )
3.3 US qt (3.1 )
3.1 US qt (2.9 )
7.6 US qt (7.2 )
6.9 US qt (6.5 )
2.0 US qt (1.9 )
2.4 US qt (2.3
2.3 US qt (2.2
1.1 US qt (1.0
1.3 US qt (1.2
)
)
)
)
4.8 US qt (4.5 )
*1 : Excluding the oil remaining in the engine
*2 : Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity:
0.145 US gal (0.55 )
05/09/13 20:09:33 31SCV630 0228 Specifications
Air Conditioning
Refrigerant type
Charge quantity
Lubricant type
Lights
Headlights
Front turn signal/parking
lights
Front side marker lights
Rear turn signal lights
Brake/Taillights
Back-up lights
License plate lights
Ceiling light
Spotlights
Cargo area light
High-mount brake light
Fuses
Interior
See page 215 or the fuse label
attached to the inside of the fuse
box door under the steering
column.
See page 216 or the fuse box
cover.
Under-hood
12 V − 60/55 W (H4/HB2)
12 V − 21/5 W
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
12 V
−
−
−
−
−
−
−
−
−
3 CP
21 W
21/5 W
18 W (21 CP)
5W
8W
4 CP
8W
21 W
Alignment
Toe-in
Camber
Caster
Tires
Size
Pressure
Front
Rear
Front
Rear
Front
Front/Rear
Front
Rear
Spare
0.0 in (0 mm)
0.08 in (2.0 mm)
−0°13’
−1°
1°50’
P215/70R16 99S
32 psi (220 kPa , 2.2 kgf/cm )
34 psi (235 kPa , 2.4 kgf/cm )
60 psi (420 kPa , 4.2 kgf/cm )
Technical Information
Battery
Capacity
HFC-134a (R-134a)
16.9−18.7 oz (480−530 g)
SP-10
12 V − 45 AH/20 HR
223
05/09/13 20:09:41 31SCV630 0229 DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all
U.S. Federal Safety Requirements.
All tires are also graded for
treadwear, traction, and temperature
performance according to
Department of Transportation
(DOT) standards. The following
explains these gradings.
Uniform Tire Quality Grading
Quality grades can be found where
applicable on the tire sidewall
between the tread shoulder and the
maximum section width. For
example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform
to Federal Safety Requirements in
addition to these grades.
224
Treadwear
The treadwear grade is a comparative rating based on the wear rate of
the tire when tested under controlled
conditions on a specified government
test course. For example, a tire
graded 150 would wear one and onehalf (1 1/2) times as well on the
government course as a tire graded
100. The relative performance of
tires depends upon the actual conditions of their use, however, and may
depart significantly from the norm
due to variations in driving habits,
service practices, and differences in
road characteristics and climate.
Traction − AA, A, B, C
The traction grades, from highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specified government test surfaces
of asphalt and concrete. A tire
marked C may have poor traction
performance.
Warning: The traction grade
assigned to this tire is based on
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
05/09/13 20:09:45 31SCV630 0230 DOT Tire Quality Grading (U.S. Vehicles)
Warning: The temperature grade for
this tire is established for a tire that
is properly inflated and not
overloaded. Excessive speed,
underinflation, or excessive loading,
either separately or in combination,
can cause heat buildup and possible
tire failure.
Technical Information
Temperature − A, B, C
The temperature grades are A (the
highest), B, and C, representing the
tire’s resistance to the generation of
heat and its ability to dissipate heat
when tested under controlled
conditions on a specified indoor
laboratory test wheel. Sustained high
temperature can cause the material
of the tire to degenerate and reduce
tire life, and excessive temperature
can lead to sudden tire failure. The
grade C corresponds to a level of
performance, which all passenger
vehicle tires must meet under the
Federal Motor Vehicle Safety
Standard No. 109. Grades B and A
represent higher levels of
performance on the laboratory test
wheel than the minimum required by
law.
225
05/09/13 20:10:01 31SCV630 0231 Tire Labeling
Tire Labeling
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
99 −Load index (a numerical code
associated with the maximum
load the tire can carry).
S −Speed symbol (an
alphabetical code indicating
the maximum speed rating).
Tire Size
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Tire Identification Number
The tire identification number (TIN)
is a group of numbers and letters
that look like this example:
DOT B97R FW6X 2202
P215/70R16 99S
−Vehicle type (P indicates
passenger vehicle).
215 −Tire width in millimeters.
70 −Aspect ratio (the tire’s section
height as a percentage of its
width).
R −Tire construction code (R
indicates radial).
16 −Rim diameter in inches.
P
226
DOT −This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.
B97R −Manufacturer’s
identification mark.
FW6X −Tire type code.
2202 −Date of manufacture.
Maximum Tire Pressure
Max Press −The maximum air
pressure the tire can
hold.
Maximum Tire Load
Max Load −The maximum load the
tire can carry at
maximum air pressure.
05/09/13 20:10:09 31SCV630 0232 Emissions Controls
The burning of gasoline in your
vehicle’s engine produces several byproducts. Some of these are carbon
monoxide (CO), oxides of nitrogen
(NOx), and hydrocarbons (HC).
Gasoline evaporating from the tank
also produces hydrocarbons.
Controlling the production of NOx,
CO, and HC is important to the
environment. Under certain
conditions of sunlight and climate,
NOx and HC react to form
photochemical ‘‘smog.’’ Carbon
monoxide does not contribute to
smog creation, but it is a poisonous
gas.
The Clean Air Act
The United States Clean Air Act*
sets standards for automobile
emissions. It also requires that
automobile manufacturers explain to
owners how their emissions controls
work and what to do to maintain
them. This section summarizes how
the emissions controls work.
Scheduled maintenance is on page
163 .
*
Crankcase Emissions Control
System
Your vehicle has a positive
crankcase ventilation system. This
keeps gasses that build up in the
engine’s crankcase from going into
the atmosphere. The positive
Evaporative Emissions Control
System
As gasoline evaporates in the fuel
tank, an evaporative emissions
control canister filled with charcoal
adsorbs the vapor. It is stored in this
canister while the engine is off. After
the engine is started and warmed up,
the vapor is drawn into the engine
and burned during driving.
Onboard Refueling Vapor
Recovery
The onboard refueling vapor
recovery (ORVR) system captures
the fuel vapors during refueling. The
vapors are adsorbed in a canister
filled with activated carbon. While
driving, the fuel vapors are drawn
into the engine and burned off.
227
Technical Information
In Canada, Honda vehicles comply
with the Canadian emission
requirements, as specified in an
agreement with Environment
Canada, at the time they are
manufactured.
crankcase ventilation valve routes
them from the crankcase back to the
intake manifold. They are then
drawn into the engine and burned.
05/09/13 20:10:17 31SCV630 0233 Emissions Controls
Exhaust Emissions Controls
The exhaust emissions controls
include three systems: PGM-FI,
ignition timing control, and three
way catalytic converter. These three
systems work together to control the
engine’s combustion and minimize
the amount of HC, CO, and NOx that
comes out the tailpipe. The exhaust
emissions control systems are
separate from the crankcase and
evaporative emissions control
systems.
PGM-FI System
The PGM-FI system uses sequential
multiport fuel injection. It has three
subsystems: air intake, engine
control, and fuel control. The
powertrain control module (PCM) in
automatic transmission vehicles or
the engine control module (ECM) in
manual transmission vehicles uses
various sensors to determine how
much air is going into the engine. It
then controls how much fuel to inject
under all operating conditions.
Ignition Timing Control System
This system constantly adjusts the
ignition timing, reducing the amount
of HC, CO, and NOx produced.
Three Way Catalytic Converter
The three way catalytic converter is
in the exhaust system. Through
chemical reactions, it converts HC,
CO, and NOx in the engine’s exhaust
to carbon dioxide (CO2), nitrogen
(N2), and water vapor.
228
Replacement Parts
The emissions control systems are
designed and certified to work together in reducing emissions to
levels that comply with the Clean Air
Act. To make sure the emissions
remain low, you should use only new
Honda replacement parts or their
equivalent for repairs. Using lower
quality parts may increase the
emissions from your vehicle.
The emissions control systems are
covered by warranties separate from
the rest of your vehicle. Read your
warranty manual for more information.
05/09/13 20:10:24 31SCV630 0234 Three Way Catalytic Converter
The three way catalytic converter
contains precious metals that serve
as catalysts, promoting chemical
reactions to convert the exhaust
gasses without affecting the metals.
The catalytic converter is referred to
as a three-way catalyst, since it acts
on HC, CO, and NOx. A replacement
unit must be an original Honda part
or its equivalent.
Have your vehicle diagnosed and
repaired if it is misfiring, backfiring, stalling, or otherwise not
running properly.
THREE WAY CATALYTIC CONVERTER
A defective three way catalytic
converter contributes to air pollution,
and can impair your engine’s performance. Follow these guidelines to
protect your vehicle’s three way
catalytic converter.
Technical Information
The three way catalytic converter
must operate at a high temperature
for the chemical reactions to take
place. It can set on fire any
combustible materials that come
near it. Park your vehicle away from
high grass, dry leaves, or other
flammables.
Keep the engine tuned-up.
Always use unleaded gasoline.
Even a small amount of leaded
gasoline can contaminate the
catalyst metals, making the three
way catalytic converter ineffective.
229
05/09/13 20:10:31 31SCV630 0235 State Emissions Testing
Testing of Readiness Codes
If you take your vehicle for a state
emissions test shortly after the
battery has been disconnected or
gone dead, it may not pass the test.
This is because of certain ‘‘readiness
codes’’ that must be set in the onboard diagnostics for the emissions
systems. These codes are erased
when the battery is disconnected,
and set again only after several days
of driving under a variety of
conditions.
If the testing facility determines that
the readiness codes are not set, you
will be requested to return at a later
date to complete the test. If you must
get the vehicle retested within the
next two or three days, you can
condition the vehicle for retesting by
doing the following.
Make sure the fuel tank is nearly,
but not completely full (around
3/4).
Make sure the vehicle has been
parked with the engine off for 6
hours or more.
Make sure the ambient
temperature is between 40° and
95°F.
230
Without touching the accelerator
pedal, start the engine, and let it
idle for 20 seconds.
Keep the vehicle in Park
(automatic transmission) or
neutral (manual transmission).
Increase the engine speed to 2,000
rpm, and hold it there until the
temperature gauge rises to at least
1/4 of the scale (about 3 minutes).
05/09/13 20:10:35 31SCV630 0236 State Emissions Testing
Select a nearby lightly traveled
major highway where you can
maintain a speed of 50 to 60 mph
(80 to 97 km/h) for at least 20
minutes. Drive on the highway in
D (A/T) or 5th (M/T). Do not use
cruise control. When traffic allows,
drive for 90 seconds without
moving the accelerator pedal.
(Vehicle speed may vary slightly;
this is okay.) If you cannot do this
for a continuous 90 seconds
because of traffic conditions, drive
for at least 30 seconds, then repeat
it two more times (for a total of 90
seconds).
Then drive in city/suburban
traffic for at least 10 minutes.
When traffic conditions allow, let
the vehicle coast for several
seconds without using the
accelerator pedal or the brake
pedal.
If the testing facility determines the
readiness codes are still not set, see
your dealer.
Technical Information
231
05/09/13 20:10:37 31SCV630 0237 232
05/09/13 20:10:40 31SCV630 0238 Warranty and Customer Relations
233
Warranty and Customer Relations
Customer Service Information..... 234
Warranty Coverages ..................... 235
Reporting Safety Defects
(U.S. Vehicles) ........................... 236
Authorized Manuals ...................... 237
05/09/13 20:10:47 31SCV630 0239 Customer Service Information
Honda dealership personnel are
trained professionals. They should
be able to answer all your questions.
If you encounter a problem that your
dealership does not solve to your
satisfaction, please discuss it with
the dealership’s management. The
service manager or general manager
can help. Almost all problems are
solved in this way.
If you are dissatisfied with the
decision made by the dealership’s
management, contact your Honda
Customer Service Office.
U.S. Owners:
American Honda Motor Co., Inc.
Honda Automobile Customer Service
Mail Stop 500-2N-7A
1919 Torrance Boulevard
Torrance, California 90501-2746
Tel: (800) 999-1009
234
Canadian Owners:
CUSTOMER RELATIONS
RELATIONS AVEC LA CLIENTÈLE
Honda Canada Inc.
715 Milner Avenue
Toronto, ON
M1B 2K8
Tel: 1-888-9-HONDA-9
Fax: Toll-free 1-877-939-0909
Toronto (416) 287-4776
When you call or write, please give
us this information:
Vehicle identification number (see
page 220 )
Name and address of the dealer
who services your vehicle
Date of purchase
Mileage on your vehicle
In Puerto Rico and the U.S. Virgin
Islands:
Bella International
P.O. Box 190816
San Juan, PR 00919-0816
Your name, address, and
telephone number
A detailed description of the
problem
Tel: (787) 620-7098
Name of the dealer who sold the
vehicle to you
05/09/13 20:10:57 31SCV630 0240 Warranty Coverages
U.S. Owners
Your new vehicle is covered by these
warranties:
Emissions Control Systems Defects
Warranty and Emissions
Performance Warranty − these two
warranties cover your vehicle’s
emissions control systems. Time,
mileage, and coverage are
conditional. Please read your
warranty booklet for exact
information.
Original Equipment Battery Limited
Warranty − this warranty gives up
to 100 % credit toward a replacement
battery.
Rust Perforation Limited Warranty
− all exterior body panels are
covered for rust-through from the
inside for the specified time period
with no mileage limit.
Accessory Limited Warranty −
Honda accessories are covered
under this warranty. Time and
mileage limits depend on the type of
accessory and other factors. Please
read your warranty booklet for
details.
Replacement Parts Limited
Warranty − covers all Honda
replacement parts against defects in
materials and workmanship.
Replacement Battery Limited
Warranty − provides prorated
coverage for a replacement battery
purchased from your dealer.
Replacement Muffler Lifetime
Limited Warranty − provides
coverage for as long as the purchaser of the muffler owns the
vehicle.
Restrictions and exclusions apply to
all these warranties. Please read the
2006 Honda warranty information
booklet that came with your vehicle
for precise information on warranty
coverages. Your vehicle’s original
tires are covered by their
manufacturer. Tire warranty
information is in a separate booklet.
Canadian Owners
Please refer to the 2006 Warranty
Manual that came with your vehicle.
235
Warranty and Customer Relations
New Vehicle Limited Warranty −
covers your new vehicle, except for
the battery, emissions control
systems, and accessories, against
defects in materials and
workmanship.
Seat Belt Limited Warranty − a seat
belt that fails to function properly is
covered for the useful life of the
vehicle.
05/09/13 20:11:01 31SCV630 0241 Reporting Safety Defects (U.S. Vehicles)
If you believe that your vehicle has a
defect which could cause a crash or
could cause injury or death, you
should immediately inform the
National Highway Traffic Safety
Administration (NHTSA) in addition
to notifying American Honda Motor
Co., Inc.
236
If NHTSA receives similar complaints, it may open an investigation,
and if it finds that a safety defect
exists in a group of vehicles, it may
order a recall and remedy campaign.
However, NHTSA cannot become
involved in individual problems
between you, your dealer, or
American Honda Motor Co., Inc.
To contact NHTSA, you may call the
Vehicle Safety Hotline toll-free at
1-888-327-4236 (TTY: 1-800-424-9153);
go to http://www.safercar.gov; or
write to: Administrator, NHTSA, 400
Seventh Street, SW., Washington,
DC 20590.
You can also obtain other
information about motor vehicle
safety from http://www.safercar.gov.
05/09/13 20:11:12 31SCV630 0242 Authorized Manuals
Purchasing Factory Authorized Manuals
(U.S. only)
Valid only for sales within the United States. Canadian
owners should contact their authorized Honda dealer.
The publications shown below can be purchased from Helm
Incorporated. You can order in any of three ways:
Detach and mail the order form on the right half of this page
Call Helm Inc. at 1-800-782-4356 (credit card orders only)
Go online at www. helminc. com
If you are interested in other years or models, contact Helm Inc.
at 1-800-782-4356.
Publication
Form Number
61SCV04
Form Description
Price
Each*
$75.00
(NOTE: For Credit Card Holder Orders Only)
Monday-Friday 8:00 A.M. − 6:00 P.M. EST
MINIMUM CREDIT CARD PURCHASE $10.00
OR
By completing this form you can order the materials desired. You can
pay by check or money order, or charge to your credit card. Mail to
Helm Incorporated at the address shown on the back of the order form.
VEHICLE MODEL
2
0
0
6
PUBLICATION NUMBER
Price
Total
Each*
Price
Qty
Name
Year
H
O
N
*
Prices are subject to change without
notice and without incurring obligation.
Orders are mailed within 10 days. Please
allow adequate time for delivery.
TOTAL MATERIAL
Mich. Purchases
Add 6% Sales Tax
HANDLING CHARGE
$6.95
GRAND TOTAL
237
Authorized Manuals
2003−2006 Honda Element
Service Manual
61SCV04EL
2003−2006 Honda Element
$50.00
Electrical Troubleshooting Manual
61SCV30
2003−2006 Honda Element
$44.00
Body Repair Manual
31SCV630
$35.00
2006 Honda Element Owner’s Manual
2006 Honda Element
31SNA700
$29.00
Navigation System Owner’s Manual
2006 Honda Element
31SCVM10
$12.00
Honda Service History
31SCVQ30
$12.00
2006 Honda Element Quick Start Guide
Order Form for Previous YearsHON-R
FREE
Indicate Year and Model Desired
*
Prices are subject to change without notice and without incurring obligation.
ORDER TOLL FREE: 1-800-782-4356
05/09/13 20:11:20 31SCV630 0243 Authorized Manuals
NOTE: Dealers and Companies please provide dealer or company name,
and also the name of the person to whose attention the shipment should
be sent. For purchases outside U.S.A. please write to the address shown
below for a quotation.
S
H
I
P
T
O
Customer Name
Attention
Street Address − No P.O. Box Number
Apartment Number
City
State & Zip Code
Daytime Telephone Number
P
A
Y
M
E
N
T
(
Electrical Troubleshooting Manual:
This manual complements the service manual by
providing in-depth troubleshooting information for each
electrical circuit in your vehicle.
)
Body Repair Manual:
This manual describes the procedures involved in the
replacement of damaged body parts.
Check or money order enclosed payable to Helm Inc − U.S. funds only.
Do not send cash
Master
Card
VISA
Check here if your billing address is different
from the shipping address shown above.
Account Number
Expiration: Mo. Yr.
−
CUSTOMER SIGNATURE
DATE
These Publications cannot be returned for credit without receiving advance authorization within 14
days of delivery. On returns, a restocking fee may be applied against the original order.
P.O. BOX 07280·DETROIT, MICHIGAN 48207·1-800-782-4356
238
Service Manual:
This manual covers maintenance and recommended
procedures for repair to engine and chassis components.
It is written for the journeyman mechanic, but is simple
enough for most mechanically-inclined owners to understand.
05/09/13 20:11:25 31SCV630 0244 Index
A
B
Battery
Charging System
Indicator............................ 54, 209
Jump Starting ............................. 205
Maintenance ............................... 193
Specifications ............................. 223
Before Driving ............................... 123
Belts, Seat ................................... 10, 20
Beverage Holders ............................ 87
Body Panels .................................... 178
Booster Seats ................................... 45
Brakes
Anti-lock System (ABS) ............ 149
Break-in, New Linings .............. 124
Bulb Replacement ..................... 182
Fluid ............................................ 177
Parking .......................................... 83
System Indicator .................. 54, 211
Wear Indicators ......................... 149
Braking System.............................. 148
Break-in, New Vehicle .................. 124
Brightness Control, Instruments ... 63
Brights, Headlights ......................... 62
Bulb Replacement
Back-up Lights ........................... 182
Brake Lights............................... 182
Front Parking Lights ................. 180
Front Side Marker Lights......... 181
Headlights .................................. 179
Specifications ............................. 223
Turn Signal Lights ..................... 180
Bulbs, Halogen ............................... 179
Bungee Cords................................. 135
CONTINUED
I
INDEX
Accessories..................................... 130
ACCESSORY (Ignition Key
Position) ........................................ 69
Accessory Power Sockets ............... 87
Additives, Engine Oil..................... 171
Airbag (SRS) .............................. 11, 23
Airbags, Additional Information .... 23
Additional Safety Precautions .... 29
Airbag Service .............................. 28
How the Side Airbag Off
Indicator Works ....................... 28
How the SRS Indicator Works ... 27
How Your Front Airbags
Work.......................................... 24
How Your Side Airbags Work.... 26
SRS Components ......................... 23
Air Conditioning System ................. 91
Usage............................................. 91
Air Pressure, Tires ........................ 188
Normal Driving .......................... 188
Antifreeze ....................................... 173
Anti-lock Brakes (ABS)
Indicator ................................ 55, 150
Operation .................................... 149
Anti-theft, Audio System............... 116
Anti-theft Steering Column Lock .. 69
Armrests, Front Seat ....................... 74
Audio System ................................... 94
Automatic Seat Belt Tensioners .... 21
Automatic Speed Control.............. 120
Automatic Transmission............... 143
Capacity, Fluid ........................... 222
Checking Fluid Level ................ 175
Shifting ........................................ 143
Shift Lever Position Indicator .. 143
Shift Lever Positions ................. 143
Shift Lock Release ..................... 146
Auxiliary Input Jack ....................... 112
05/09/13 20:11:29 31SCV630 0245 Index
C
Capacities Chart............................. 222
Carbon Monoxide Hazard .............. 47
Carrying Cargo .............................. 132
CAUTION, Explanation of ............... ii
CD Care .......................................... 113
CD Changer.................................... 112
CD Error Message ........................ 114
CD Changer Error Message ........ 115
CD Player........................................ 106
Ceiling Pocket .................................. 86
Certification Label ......................... 220
Chains ............................................. 192
Changing a Flat Tire ..................... 197
Changing Oil .................................. 171
How to ......................................... 171
When to....................................... 165
Charging System Indicator .... 54, 209
Checklist, Before Driving ............. 139
Child Safety ...................................... 30
Child Seats
LATCH Anchorage System ....... 39
Lower Anchors ............................ 39
Tether Anchorage Points ........... 43
Cleaning the Body Panels ............. 178
II
Clock ............................................... 117
Clock, Setting the .......................... 117
Clutch Fluid .................................... 177
CO in the Exhaust ......................... 227
Cold Weather, Starting in ............. 140
Compact Spare ............................... 196
Consumer Information*................ 234
Controls, Instruments and .............. 51
Coolant
Adding ......................................... 173
Checking ..................................... 128
Proper Solution .......................... 173
Temperature Gauge .................... 59
Crankcase Emissions Control
System......................................... 227
Cruise Control Indicator ................. 56
Cruise Control Operation ............. 120
Customer Service Office .............. 234
D
DANGER, Explanation of ................. ii
Dashboard .................................... 4, 52
Daytime Running Lights
Indicator** .................................... 56
Dead Battery .................................. 205
Defects, Reporting Safety* .......... 236
Defog and Defrost ........................... 93
Defogger, Rear Window ................. 63
Defrosting the Windows ................. 93
Dimensions ..................................... 222
Dimming the Headlights ................ 62
Dipstick
Automatic Transmission........... 175
Engine Oil ................................... 128
Directional Signals ........................... 62
Disc Brake Wear Indicators ......... 149
Disposal of Used Oil ...................... 172
Doors
Locking and Unlocking ............... 70
Power Door Locks ....................... 70
DOT Tire Quality Grading* ......... 224
Downshifting, Manual
Transmission .............................. 141
Driver and Passenger Safety ............ 7
Driving ............................................ 137
Economy ..................................... 129
Driving Guidelines ......................... 138
Dust and Pollen Filter ................... 185
05/09/13 20:11:34 31SCV630 0246 Index
E
F
Fan, Interior...................................... 91
Features ............................................ 89
Filling the Fuel Tank ..................... 126
Filters
Dust and Pollen .......................... 185
Oil ................................................ 171
Flashers, Hazard Warning.............. 63
Flat Tire, Changing a .................... 197
Fluids
Automatic Transmission........... 175
Brake ........................................... 177
Clutch .......................................... 177
Manual Transmission ............... 176
Power Steering........................... 178
Windshield Washer ................... 174
FM Stereo Radio
Reception ...................................... 98
Folding Rear Seat ............................ 77
Four-way Flashers ........................... 63
Four-wheel Drive ........................... 138
Front Airbags ............................. 11, 23
Front Seat
Adjusting ....................................... 12
Airbags .......................................... 23
Fuel .................................................. 124
Fill Door and Cap....................... 126
Gauge ............................................ 59
Octane Requirement ................. 124
Reserve Indicator......................... 56
Tank, Filling the......................... 126
Fuses, Checking the ...................... 212
G
Gas Mileage, Improving................ 129
Gasoline .......................................... 124
Fuel Reserve Indicator ................ 56
Gauge ............................................ 59
Octane Requirement ................. 124
Tank, Filling the......................... 126
CONTINUED
III
INDEX
Economy, Fuel ............................... 129
Emergencies on the Road............. 195
Battery, Jump Starting .............. 205
Brake System Indicator ............ 211
Changing a Flat Tire ................. 197
Charging System Indicator ...... 209
Checking the Fuses................... 212
Hazard Warning Flashers .......... 63
Low Oil Pressure Indicator ...... 209
Malfunction Indicator Lamp .... 210
Overheated Engine ................... 207
Emergency Brake ............................ 83
Emergency Flashers ....................... 63
Emergency Towing ....................... 217
Emissions Controls........................ 227
Emissions Testing, State .............. 230
Engine
Coolant Temperature Gauge ..... 59
Engine Speed Limiter ....... 142, 145
Malfunction Indicator
Lamp ................................. 54, 210
Oil Pressure Indicator ......... 54, 209
Oil, What Kind to Use ............... 170
Overheating................................ 207
Specifications ............................. 222
Starting........................................ 140
Evaporative Emissions Controls .. 227
Exhaust Fumes ................................ 47
Expectant Mothers, Use of Seat
Belts by ......................................... 18
05/09/13 20:11:40 31SCV630 0247 Index
Gas Station Procedures................. 126
Gauges
Engine Coolant Temperature .... 59
Fuel ................................................ 59
Gearshift Lever Positions
Automatic Transmission........... 143
Manual Transmission ............... 141
Glove Box ......................................... 87
H
Halogen Headlight Bulbs.............. 179
Hatch ................................................. 71
Hazard Warning Flashers............... 63
Headlights
Aiming ......................................... 179
Daytime Running Lights** ........ 62
High Beam Indicator ................... 56
Reminder Beeper ......................... 62
Replacing Halogen Bulbs ......... 179
Turning on .................................... 62
Head Restraints ............................... 75
Heating and Cooling ........................ 90
High Altitude, Starting at .............. 140
High-Low Beam Switch .................. 62
Hood, Opening and Closing the ... 127
IV
Horn............................................... 5, 60
Hydraulic Clutch ............................ 177
I
Identification Number, Vehicle.... 220
Ignition
Keys............................................... 65
Switch ............................................ 69
Timing Control System ............. 228
Immobilizer System......................... 66
Important Safety Precautions .......... 8
Indicators, Instrument Panel .......... 53
Infant Restraint ................................ 35
Infant Seats ....................................... 35
LATCH Anchorage System ....... 39
Lower Anchors ............................ 39
Tether Anchorage Points ........... 43
Inflation, Proper Tire .................... 187
Normal Driving .......................... 188
Inside Mirror .................................... 82
Inspection, Tire .............................. 189
Instrument Panel ............................. 53
Instrument Panel Brightness ......... 63
Interior Lights .................................. 88
Introduction ......................................... i
J
Jacking up the Vehicle .................. 199
Jack, Tire ........................................ 197
Jump Starting ................................. 205
K
Keys ................................................... 65
L
Label, Certification ........................ 220
Lane Change, Signaling .................. 62
Lap/Shoulder Belts ................... 15, 20
LATCH Anchorage System............ 39
Lights
Bulb Replacement ..................... 179
Indicator ........................................ 53
Parking .......................................... 62
Turn Signal ................................... 62
Load Limits..................................... 133
LOCK (Ignition Key Position) ....... 69
Locks
Anti-theft Steering Column ........ 69
Fuel Fill Door ............................. 126
05/09/13 20:11:46 31SCV630 0248 Index
Glove Box ..................................... 87
Power Door .................................. 70
Tailgate ......................................... 72
Low Coolant Level ......................... 128
Low Fuel Indicator .......................... 56
Low Oil Pressure Indicator .... 54, 209
Lower Anchors................................. 39
Lower Gear, Downshifting to a.... 141
Lubricant Specifications Chart .... 222
Luggage .......................................... 132
Modifying Your Vehicle................ 131
N
Neutral Gear Position.................... 144
New Vehicle Break-in ................... 124
Normal Shift Speeds...................... 142
NOTICE, Explanation of .................... i
Numbers, Identification ................ 220
O
M
Octane Requirement, Gasoline .... 124
Odometer .......................................... 58
Odometer, Trip ................................ 58
Off-Highway Driving ..................... 157
Oil
Change, How to ......................... 171
Change, When to ....................... 165
Checking Engine ....................... 128
Pressure Indicator ............... 54, 209
Selecting Proper Viscosity
Chart ....................................... 170
ON (Ignition Key Position) ............ 69
Onboard Refueling Vapor
Recovery ..................................... 227
P
Panel Brightness Control ............... 63
Park Gear Position......................... 143
Parking ............................................ 147
Parking Brake .................................. 83
Parking Brake and Brake
System Indicator .................. 54, 211
Parking Lights.................................. 62
Parking Over Things that Burn ... 147
Playing a Disc ................................. 106
Playing the AM/FM Radio ............. 94
Playing the XM Satellite
Radio ........................................... 100
PGM-FI System.............................. 228
Power Socket Locations.................. 87
Power Windows ............................... 81
Power Door Locks ........................... 70
Pregnancy, Using Seat Belts .......... 18
CONTINUED
V
INDEX
Maintenance ................................... 161
Owner Maintenance Checks.... 164
Record .................................. 167-168
Required Indicator ....................... 57
Safety........................................... 162
Schedule .............................. 165-166
Malfunction Indicator Lamp .. 54, 210
Manual Transmission.................... 141
Checking Fluid Level ................ 176
Shifting the ................................. 141
Manual Transmission Fluid ......... 176
Meters, Gauges.......................... 53, 58
Mirrors, Adjusting ........................... 82
Outside Mirrors ............................... 82
Overdrive ........................................ 145
Overheating, Engine ..................... 207
Owner Maintenance Checks ........ 164
05/09/13 20:11:51 31SCV630 0249 Index
Protecting Adults and Teens.......... 12
Additional Safety Precautions .... 19
Advice for Pregnant Women...... 18
Protecting Children ......................... 30
Protecting Infants and Small
Children ........................................ 35
Protecting Larger Children ............ 44
Using Booster Seat ...................... 45
R
Radiator Overheating .................... 207
Radio/CD Sound System ................ 94
Readiness Codes ............................ 230
Rear Doors........................................ 70
Rear Lights, Bulb Replacement ... 182
Rear Seat Access ............................. 75
Rear Seat, Folding ........................... 77
Rear View Mirror ............................. 82
Rear Window Defogger .................. 63
Rear Window Wiper and Washer .. 61
Reclining the Seat-Backs ................ 73
Recommended Shift Speeds ........ 142
Reminder Lights .............................. 53
Removing the Rear Seats................ 79
Remote Transmitter ........................ 67
VI
Replacement Information
Dust and Pollen Filter ............... 185
Engine Oil and Filter ................. 171
Fuses ........................................... 212
Light Bulbs ................................. 179
Schedule ..................................... 165
Tires ............................................ 187
Wiper Blades .............................. 186
Replacing Seat Belts After a
Crash ............................................. 21
Reserve Tank, Engine
Coolant ................................ 128, 173
Restraint, Child ................................ 30
Reverse Gear Position................... 144
Roof Rack ....................................... 134
Rotation, Tire ................................. 190
S
Safety Belts................................. 10, 20
Safety Defects, Reporting* .......... 236
Safety Features .................................. 9
Airbags .......................................... 11
Seat Belts ...................................... 10
Safety Labels, Location of .............. 48
Safety Messages ................................ ii
Satellite Radio................................. 100
Seat Belts .................................... 10, 20
Additional Information ................ 20
Automatic Seat Belt
Tensioners ................................ 21
Lap/Shoulder Belt ................. 15, 20
Maintenance ................................. 21
Reminder Light ...................... 20, 54
System Components.................... 20
Use During Pregnancy................ 18
Wearing a Lap/Shoulder Belt .... 15
Seats, Adjusting the ......................... 73
Serial Number ................................ 220
Service Intervals ............................ 165
Service Manual* ............................ 237
Service Station Procedure ............ 126
Setting the Clock ........................... 117
Shift Lever Position Indicator ...... 143
Shift Lock Release ......................... 146
Side Airbags ..................................... 26
Off Indicator ................................. 28
Side Marker Lights, Bulb
Replacement ............................... 181
Signaling Turns ................................ 62
Skylight ............................................. 83
Snow Tires ...................................... 191
05/09/13 20:11:55 31SCV630 0250 Index
Anti-theft Column Lock .............. 69
Stereo Sound System ...................... 94
Storing Your Vehicle ..................... 194
Supplemental Restraint
System................................. 11, 23
Servicing ....................................... 28
SRS Indicator.......................... 27, 55
System Components.................... 23
Synthetic Oil ................................... 171
T
Tailgate
Open Indicator ............................. 57
Opening the .................................. 72
Taillights, Changing Bulbs ........... 182
Taking Care of the Unexpected .. 195
Technical Descriptions
DOT Tire Quality Grading ....... 224
Emissions Control Systems ...... 227
State Emissions Testing ........... 230
Three Way Catalytic
Converter ................................ 229
Tire Labeling .................................. 226
Temperature Gauge ........................ 59
Tether Anchorage Points ............... 43
Theft Protection............................. 116
Three Way Catalytic Converter ... 229
Tilt the Steering Wheel................... 64
Time, Setting the ........................... 117
Tire Chains ..................................... 192
Tire, How to Change a Flat .......... 197
Tire Information ............................ 224
Tires ................................................ 187
Air Pressure ............................... 188
Checking Wear .......................... 189
Compact Spare ........................... 196
DOT Tire Quality Grading* ..... 224
Inflation ....................................... 187
Inspection ................................... 189
Maintenance ............................... 189
Replacing .................................... 190
Rotating....................................... 190
Snow ............................................ 191
Specifications ............................. 223
Tire Chains ................................. 192
Tools, Tire Changing .................... 197
INDEX
Sound System ................................... 94
Spare Tire ....................................... 196
Inflating ....................................... 196
Specifications ............................. 223
Specifications Charts..................... 222
Speed Control ................................. 120
SRS, Additional Information........... 23
Additional Safety Precautions .... 29
Airbag Service .............................. 28
How the Side Airbag Off
Indicator Works ....................... 28
How the SRS Indicator Works ... 27
How Your Front Airbags
Work.......................................... 24
How Your Side Airbags Work.... 26
SRS Components ......................... 23
SRS Indicator.............................. 27, 55
START (Ignition Key Position) ..... 69
State Emissions Testing ............... 230
Starting the Engine........................ 140
In Cold Weather at High
Altitude ................................... 140
With a Dead Battery ................. 205
Steam Coming from Engine ......... 207
Steering Wheel
Adjustment ................................... 64
CONTINUED
VII
05/09/13 20:12:00 31SCV630 0251 Index
Towing
A Trailer ...................................... 151
Emergency ................................. 217
Equipment And Accessories .... 153
Weight Limit .............................. 151
Trailer Loading .............................. 152
Trailer Towing Tips....................... 155
Traction Devices ............................ 192
Transmission
Checking Fluid Level,
Automatic ............................... 175
Checking Fluid Level,
Manual .................................... 176
Fluid Selection ................... 175, 176
Identification Number ............... 220
Shifting the Automatic .............. 143
Shifting the Manual ................... 141
Treadwear* .................................... 224
Trip Meter ........................................ 58
Turn Signals ..................................... 62
U
Unexpected, Taking Care
of the ........................................... 195
Uniform Tire Quality Grading* ... 224
VIII
Unleaded Gasoline......................... 124
Used Oil, How to Dispose of ........ 172
V
Vehicle Capacity Load .................. 133
Vehicle Dimensions....................... 222
Vehicle Identification Number..... 220
Vehicle Storage .............................. 194
Ventilation......................................... 92
VIN .................................................. 220
Viscosity, Oil................................... 170
W
Windows
Operating the Power ................... 81
Rear, Defogger ............................ 63
Windshield
Cleaning ........................................ 61
Defroster ...................................... 93
Washers ...................................... 174
Wipers, Windshield
Changing Blades ........................ 186
Operation ...................................... 61
Worn Tires ..................................... 189
Wrecker, Emergency Towing ...... 217
*
**
WARNING, Explanation of .............. ii
Warning Labels, Location of .......... 48
Warranty Coverages* ................... 235
Washers, Windshield
Checking the Fluid Level ......... 174
Operation ...................................... 61
Wheels
Adjusting the Steering ................ 64
Alignment and Balance ............. 189
Nut Wrench ................................ 198
: U.S. only
: Canada only
05/09/13 20:12:02 31SCV630 0252 IX
05/09/13 20:12:19 31SCV630 0253 Service Information Summary
Gasoline:
Unleaded gasoline, pump octane
number of 87 or higher.
Fuel Tank Capacity:
15.9 US gal (60 )
Recommended Engine Oil:
API Premium grade 5W-20
detergent oil (see page 170 ).
Oil change capacity (including
filter):
4.4 US qt (4.2 )
Automatic Transmission Fluid:
Honda ATF-Z1 (Automatic
Transmission Fluid) preferred, or
a DEXRON III ATF as a
temporary replacement (see page
175 ).
Manual Transmission Fluid:
Honda Manual Transmission
Fluid preferred, or an SAE 10W-30
or 10W-40 motor oil as a
temporary replacement (see page
176 ).
Capacity (including differential):
2.0 US qt (1.9 )
Rear Differential Fluid:
Honda Dual Pump Fluid. Do not
use ATF.
Capacity:
1.1 US qt (1.0 )
Power Steering Fluid:
Honda Power Steering Fluid
preferred, or another brand of
power steering fluid as a
temporary replacement. Do not
use ATF (see page 178 ).
Brake Fluid:
Honda Heavy Duty Brake Fluid
DOT 3 preferred, or a DOT 3 or
DOT 4 brake fluid as a temporary
replacement (see page 177 ).
Tire Pressure (measured cold):
Front:
32 psi (220 kPa , 2.2 kgf/cm )
Rear:
34 psi (235 kPa , 2.4 kgf/cm )
Spare Tire Pressure:
60 psi (420 kPa , 4.2 kgf/cm )
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement