2012 model information

2012 model information
2012 MODEL INFORMATION
OVERVIEW ----------------------- P.2
SPORT PERFORMANCE ---------- P.5
POWERFUL ENGINE ---------------------- P.5
COMPACT & LIGHTWEIGHT BODY - ------ P.7
SUPERIOR SPORT HANDLING ------------ P.8
PRECISE CONTROL ---------------------- P.9
MUD RESISTANCE -------------- P.12
LAYOUT ENSURES UNCOMPROMISED
PERFORMANCE ------------------------- P.12
UTILITY PERFORMANCE -------- P.14
COMFORT & CONVENIENCE ------------ P.14
FLAGSHIP STYLING ------------- P.16
WIDE, RUGGED, SPORTY DESIGN ------- P.16
MODEL NAME
Brute Force 750 4x4i EPS
COLOUR(S) --------------------- P.18
SPECIFICATIONS --------------- P.21
MARKETING CODE
KVF750G/H/J
Version: 7 Feb 2011
Intended as a general reference for the preparation of marketing materials, some of the
material contained herein may not apply to all markets.
OVERVIEW
KAWASAKI’S
NEWEST FLAGSHIP
ATV WITH
SERIOUS SPORT
PERFORMANCE
Designed for sporty off-road riding,
Kawasaki’s flagship ATV offers the potent
combination of a high-performance 750 cc
V-Twin engine and a compact, lightweight
body. Significantly improved handling
and a new EPS system offer a serious
boost in sport riding potential. Superb
control features further contribute to rider
confidence, this precise control enabling
riders to take full advantage of the engine
and chassis’ potential.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
2
OVERVIEW
SPORT PERFORMANCE
POWERFUL ENGINE
High performance
749 cc V-Twin
- High peak torque and power
- Superb
acceleration
- Increased low-rpm
torque complements the reinforced chassis
to ensure character remains
unchanged NEW
SUPERIOR SPORT HANDLING
High-revving
character
Significantly improved handling
- Revision to the steering column assembly contributes to improved handling even without EPS
- Thicker-walled piping for the rear stablisers offers increased lateral stability
V-Twin
Stronger frame
Single
V-Twin 750 cc
Slim riding position ideal for sport riding
- V-Twin engine arranged longitudinally
Compact
CVT uses
belt clutch,
enabling smaller,
lighter design
than rivals with
centrifugal clutch
Light weight with
high durability
- Reduced kickback and bump steer during high-speed
sport riding and in rough conditions makes it easier to
enjoy this model’s sporty performance.
V-Twin
750 cc
COMPACT & LIGHTWEIGHT BODY
- Size on par with 360 cc (KVF360)
- Frame reinforcements contribute to improved rough road handling
NEW
Single
Single 360 cc
NEW
EPS (Electric Power Steering)
V-Twin
V-Twin 750 cc
Compact engine
NEW
Kawasaki
ATV
Rivals
PRECISE CONTROL
Single suspension ensures stable turning
Sturdy
360 cc V-Twin
characteristics
(with minimal body roll)
750 cc
and superb road-holding performance
- Double-wishbone (A-arm) suspension (F/R)
Rivals
Kawasaki
ATV
Single
360 offers
cc
CVT
very direct feel
Single 360 cc
Front disc brakes
- Excellent feel, performance for sport riding
V-Twin 750 cc
V-Twin 750 cc
A
Dual hand controls offer maximum rider control
V-Twin
750 cc
- Foot pedal activation of rear brake also possible
On-demand Variable Front Differential Control
A
- Can be engaged on the fly
- No V-Twin
need to remove hand from the bar
750
ccand amount of torque can be controlled
- Both
timing
Electrically Selectable 2WD/4WD
Single 360 cc
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
Single 360 cc
Single
- 2WD: light steering
ccenhanced traction & light steering
360
- 4WD:
- 4WD with diff-lock: maximum traction
Single
360 cc
3
OVERVIEW
MUD RESISTANCE
LAYOUT ENSURES UNCOMPROMISED PERFORMANCE
Protective shielding added
Air-cleaner and intake positioned
higher than rivals
NEW
- Helps prevent mud from getting into the
air intake and protect electrical equipment
located up front
Highly acclaimed sealed internal
wet rear brake
Larger wheel-well flaps
- Ensures uncompromised brake
performance even in wet, muddy
conditions
- Minimises ingress
of mud/water
into the engine
compartment
UTILITY PERFORMANCE
FLAGSHIP STYLING
CONVENIENCE & COMFORT
WIDE, RUGGED, SPORTY DESIGN
Carriers
- Front: 40 kg; Rear: 80 kg capacity
- Larger-diameter tubing
- Hook loops added NEW
NEW
Handy fender pockets
- LS: Sealed; RS: Easy-access
Front bonnet storage
NEW
NEW
Revised front area
(bonnet, bumper, lights,
fenders) and rear fenders
Widely spaced headlights
contribute to widelooking stance
Cast aluminium wheels
- Holds 2 water bottles
1,250 lb towing capacity
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
4
SPORT PERFORMANCE
POWERFUL ENGINE
Modifications to the KVF750G/H/J’s powerful V-Twin engine had two goals. Already recognised for its impressive power and torque, and
superb acceleration, increased performance complements the reinforced chassis, ensuring the engine character and feeling of its predecessor
are maintained. Other setting changes offer improved off-idle characteristics, increasing control when riding at slow speeds.
High performance 749 cc V-Twin
* Powerful, liquid-cooled, 749 cc SOHC, 4-valve
V-twin engine churns out a substantial 37 kW {50 PS} at 6,750 rpm.
* Ample torque output (59 N m {6.0 kgfm} at 5,250 rpm) lets the KVF750G/H/J accelerate with ease.
* Oversquare bore and stroke measure 85 x 66 mm.
* Offsetting the cylinders by 90° results in perfect
primary balance, for low vibration levels and
comfortable riding
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
5
SPORT PERFORMANCE
* All-aluminium cylinders feature electrofusion-coated bores for light
weight, long wear and excellent heat dispersion.
NEW
* Higher compression ratio (8.8:1
9.3:1) care of new cylinder heads
contributes to increased ultra-low rpm torque. Mid-high performance is
maintained, but the increased low-end performance helps when starting
from a stop.
NEW
* New camshaft profiles with revised timing (IN/EX 244°/244°
264°/254°) and increase valve lift (IN/EX 7.1/6.8 mm
7.5/6.8 mm) also
contribute to the increased performance.
NEW
* Revised top ring and oil ring for the pistons (piston grooves modified
accordingly) help reduce oil consumption and blow-by gases.
NEW
* Idealised exhaust pipe lengths and revised internal muffler construction
(two connecting holes added to partition) contribute to improved engine
performance.
NEW
NEW
NEW
NEW
NEW * Starter gear is made of stronger material and uses deeper (5 mm
7 mm) teeth for increased durability.
Fuel injection
* Taking into account coolant temperature, air intake temperature, throttle
position, air intake pressure, vehicle speed and crankshaft angle, the
fuel injection system (which uses 36 mm throttle bodies and a 32-bit
CPU) automatically meters out the ideal amount of fuel for extremely
stable power delivery – no matter what the conditions. And of course,
setting adjustments are not necessary when changing altitude, idling
adjustments are unnecessary, and starting is hassle-free.
* With fuel injection fuel delivery is instantaneous, ensuring response is
sharper than ever – ideal for sport riding.
* A light spring rate for the throttle return springs and ball bearings in the
throttle bodies (to reduce friction) give a light feel at the throttle lever,
which contributes to reduced rider fatigue.
* The exhaust pipes are now formed from stainless steel (previously steel)
to better handle stress and offer increased rust resistance. Mounting the
muffler using rubber mounts (instead of rigid) also helps alleviate stress
to the exhaust system.
* Improved starting comes care of a thinner ACR (Auto Compression
Release) shaft (that reduces friction between itself and the camshaft)
and a stronger ACR return spring.
* Generator offers increased output (25.2 A / 5,000 rpm
33.5 A / 5,000
rpm) to ensure sufficient current to operate the EPS. Regulator capacity
increased accordingly. (These changes apply to both the EPS- and nonEPS models.)
* Larger radiator (24.2 kW
26 kW), larger radiator fan (ø210 mm
ø230 mm) and larger-diameter cooling hoses and pipes (ø19 mm
ø24 mm) increase cooling performance. Using a self-repairing breaker
(relocated near the steering shaft) and a dedicated fuse for the fan
contributes to added convenience. The coolant reservoir is now located
near the right front wheel (previously in front of the rider’s left foot).
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
* A high-pressure fuel pump is located inside the tank. A unique reservoir
chamber at the bottom of the fuel pump ensures air does not get into
the fuel system.
NEW
* New settings match the revised engine characteristics and contribute to
improved off-idle character.
High-revving character
* Featuring a powerful V-Twin engine, the KVF750G/H/J offers a highrevving character.
* Engine performance increases were designed to ensure the KVF750G/
H/J’s character remains the same despite an increase in weight.
6
V-Twin
Single
SPORT PERFORMANCE
COMPACT & LIGHTWEIGHT BODY
V-Twin 750 cc
V-Twin
750 cc
Rivals
Kawasaki
Thanks to its compact engine and chassis, the KVF750G/H/J offers very nimble handling,ATVfacilitating sport riding and adding to rider confidence.
Single 360 cc
Compact engine
Single
360 cc
Compact CVT transmission
* A compact design was one of the goals when developing the 749 cc
V-Twin engine. As a result, its size is on par with the 360 cc Single used
in the KVF360. (Illustration A)
V-Twin 750 cc
Single 360 cc
V-Twin
750 cc
Single
360 cc
A
* The compact CVT uses a belt clutch enabling a smaller, lighter design
than rivals with a centrifugal clutch.
NEW * Changing one of the High gear ratios (30/26
29/27) and using a
thicker (14.6 mm
15.3 mm) belt made of stronger material contribute
to longer belt life, enabling a longer maintenance cycle.
Light weight
* Despite the slight increase in weight (due frame reinforcement, cast
aluminium wheels, EPS, etc) the KVF750G/H/J is still a comparatively
lightweight machine, weighing less than many smaller-displacement
rivals.
Slim riding position ideal for sport riding
* The V-Twin engine is arranged longitudinally, enabling a slim package
between the rider’s legs. This enables a slim riding position, ideal for
sport riding.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
7
SPORT PERFORMANCE
SUPERIOR SPORT HANDLING
Changes for improved handling take the KVF750G/H/J’s sport riding potential to a whole new level: shocks from kickback and bump steer
have been significantly reduced, resulting in light, easy handling. The increased chassis stability is further complemented by electric power
steering, which offers additional comfort and control.
Significantly improved handling
EPS (Electric Power Steering)
NEW
* Steering assembly revision sees the steering shaft no longer directly
connected to the front differential. (The bottom of the steering shaft fits
into a slot in the top of the differential.) Movement of the differential due
to changes in throttle application no longer affects the steering actuator,
resulting in significantly smoother handling (even without EPS).
NEW
* Rear stabiliser
rods use thickerwalled (3.2 mm
4.0 mm) tubing
(outer diameter
unchanged at
22.2 mm) for
increased lateral
stability. (Photo 1)
1
Stronger frame
NEW
* Double-cradle frame is reinforced at critical points (front A-arm mounts,
rear stabiliser mounts, front/rear engine mounts, and footrest mounts,
etc), resulting in improved rough road handling. The frame’s improved
ability to absorb shocks when sport riding on rough roads and the
increased ride comfort enable a higher average pace to be kept.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
NEW * Kawasaki’s high-grade electric power steering (EPS) offers both
enhanced handling and increased ride comfort. Turning the handle
causes a signal to be sent to the EPS ECU, initiating assistance. The
ECU uses input from a vehicle speed sensor and torque sensor to
determine the amount of steering assistance required from the system’s
electric motor. At slow speeds or when stopped, assistance is greatest;
assistance is reduced as vehicle speed increases to ensure stable
handling. (Photo 2)
NEW * The EPS system
also enhances
ride comfort and
control by acting as
a damping system.
When steering
input is neutral, the
inertia of the electric
motor acts as a
stabiliser. Likewise,
it significantly
reduces bump steer
and kickback to the
handle caused by
shocks to the wheels.
2
8
SPORT PERFORMANCE
PRECISE CONTROL
With its emphasis decidedly on sport, this sport-utility ATV ensures maximum rider confidence through numerous features that facilitate rider
control.
Sturdy suspension
* The KVF750G/H/J’s sturdy suspension ensures very stable turning
characteristics (with minimal body roll), and superb road-holding
performance.
* Double wishbone
suspension used front
and rear ensures high
degree of traction
and ride comfort,
especially in the low
and medium speed
ranges. Suspension
settings contribute
to a planted feeling
in corners, ensuring
high sport riding
potential. (Photo 3)
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
* Lower rear A-arms use a combination of needle bearings and pillow
balls for high stability, smooth suspension action and superb ride
comfort.
3
NEW * Front A-arm (upper and lower) pivot joints use rubber bushings,
reducing necessary maintenance.
NEW * Revised front and rear A-arm/shock absorber layout (shock absorbers
are mounted between the upper and lower A-arms at more of a splayed
angle) and shock settings enable a higher ground clearance to be
maintained once a rider sits on the ATV.
NEW * With the revised geometry, single-rate springs were found to offer the
best performance.
9
SPORT PERFORMANCE
CVT offers very direct feel
Front disc brakes
* The CVT transmission offers very direct control of the V-Twin’s engine
response, enabling riders to dial in just the right amount of power. (Photo 4)
NEW
* Revised settings (belt converter weight and drive springs) offer
improved speed transition characteristics, increasing control during lowspeed operation.
4
* Twin 200 mm discs
with dual-piston
brake calipers deliver
powerful, progressive
braking, offering
excellent feel and
performance for sport
riding. (Photo 5)
5
Dual hand controls offer maximum control
* Both the front and rear brakes can be engaged by hand levers, enabling
precise rider control.
* Riders also have the option of using a foot pedal (on the right) to
activate the rear brake.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 0
SPORT PERFORMANCE
On-demand Variable Front Differential Control
* Variable Front Differential Control makes it much easier to get the
ATV moving when it gets stuck. Lever operation lets the rider adjust
the amount of torque to suit conditions. Without rider intervention, the
system functions as a limited slip differential. Applying force to the
lever increases the torque (thereby reducing slip) to a maximum level
equivalent to that of a mechanical differential lock (i.e. no slip). This
wide range of fine-tuning ability is a technological feature unseen in
other industries, let alone on competitors’ ATVs.
Electrically Selectable 2WD/4WD
* Electrically “selectable” 2WD/4WD system allows easy changing
between drive systems to suit changing terrain and applications.
2WD: offers light steering
4WD: offers enhanced traction while keeping steering light
4WD + differential lock: offers maximum traction
* Because the system is on-demand, even with the differential lock off,
enhanced traction is but a lever pull away. It can be engaged on the
fly, without having to remove one’s hand from the handlebar, so when
faced with an upcoming obstacle there is no need to stop the ATV to
change settings – just dial in the necessary amount of torque and ride
right over it.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 1
MUD RESISTANCE
LAYOUT ENSURES UNCOMPROMISED PERFORMANCE
Already happy in adverse conditions, revisions for increased mud resistance make it possible to take the KVF750G/H/J deeper into the
muck than before as splashing water/mud is even less likely to affect performance.
Minimum effect from adverse conditions
* Air routed to the air cleaner and CVT unit enters a cavity located in
front of the air cleaner box via a rear-facing snorkel intake under the
handlebars to help prevent the ingress of water, mud, etc.
NEW
* Greater overlap between the air cleaner box’s intake tube and snorkel
extension make it even more difficult for water and/or mud to get into
the air cleaner.
6
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
12MY
NEW * CVT duct (between the air cleaner and CVT case) placement and layout
was revised to further prevent water/mud ingress into the CVT case.
NEW * Protective shielding added under the front bonnet helps prevent mud
from reaching the air intake, and helps protect the relocated electrical
equipment from the elements.
NEW * Larger wheel-well flaps minimise the ingress of water/mud into the
engine compartment. (Photos 6-7)
11MY
7
1 2
MUD RESISTANCE
Sealed internal wet rear brake
* This highly acclaimed feature completely seals the internal brake
components from mud and dust, etc, ensuring brake performance is not
compromised in wet, muddy conditions. (Photo 8)
8
* Its compact size contributes to a ground clearance greater than that of
competing models, allowing the KVF750G/H/J to go where others fear
to tread.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 3
UTILITY PERFORMANCE
COMFORT & CONVENIENCE
Strong carrying and towing capacity and convenient storage spaces ensure the KVF750G/H/J is able work as hard as it can play. This is
complemented by all-day comfort so that, whether loaded up with tools or toys, the KVF750G/H/J makes an ideal outdoor partner.
Carrying and towing capacity
Convenient storage
* Convenient carriers hold 40 kg up front and 80 kg in the rear, and are
ideal for work, camping and many other tasks.
NEW
NEW
* Handy new covered bonnet storage is large enough to hold two 500 mL
bottles. (Photo 10)
* Stronger, larger-diameter tubing (19.1 mm
25.4 mm) contributes
to the tougher styling, and hook loops added to the tubes facilitate
securing a load. (Photo 9)
10
9
* The KVF750G/H/J offers a 1,250 lb towing capacity and is fitted
standard with a trailer hitch bracket.
* Space to fit a winch is available inside the front guard. The sturdy frame
can handle a 3,000 lb class winch.
* In addition to accessory mounting brackets available for either a Super
Winch or Warn-brand winch, models come standard with pre-routed
tubing that facilitates routing winch wiring.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
* A sealed waterproof glove box is located on the front left fender. The
convenient storage compartment complements the easy-access
storage pocket (located on the right).
1 4
UTILITY PERFORMANCE
Increased comfort
Accessory outlets
* Seat urethane was selected for good ride comfort. The seat feels
soft initially, but offers firm support for comfort after long hours in the
saddle.
NEW
* 12 V DC socket (10 A) for powering accessories is conveniently located
at the front left, just below the handle cover. (Photo 12)
* New seat material has superb elasticity, offering increased comfort and
holding performance. The material is also resistant to cold, allowing it
to maintain its suppleness when temperatures drop and reducing the
chance of tearing/ripping when exposed to cold temperatures. (Photo 11)
12
11
* At the rear, an Auxiliary Electrical Accessory Connector is located next
to the taillight, providing easy-access power for lights on a trailer or
other accessory.
NEW
* Thicker covers for the rear exhaust pipe and muffler, and heat-resistant
padding added to the inside of the side covers significantly reduces
engine heat transmitted to the rider, contributing to enhanced rider
comfort.
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 5
FLAGSHIP STYLING
WIDE, RUGGED, SPORTY DESIGN
A new styling package, including revised bodywork and high-quality cast aluminium wheels ensure the KVF750G/H/J looks every bit the
head of Kawasaki’s ATV line-up.
Bodywork
NEW
* Revised front area (bonnet, bumper, headlight covers) is the key feature
of the KVF750G/H/J’s new wide, rugged, sporty design. (Photo 13)
13
NEW
* Twin, round headlights (previously a 4-bulb design) were placed as
far apart as possible, contributing to the wide-looking stance of the
KVF750G/H/J.
NEW
* New front and rear fenders complement the tougher-looking design.
(Photo 14)
14
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 6
FLAGSHIP STYLING
NEW
* A redesigned taillight adorns the rear.
* Fenders and body parts have a scratch-resistant finish for long-wearing
good looks. Fit and finish is excellent.
NEW
* Handlebar grips contribute to both the sporty design and rider control,
as well as offering reduced vibration. (Photo 15)
15
Instrumentation
NEW
* New instrumentation offers improved legibility. Automotive-style design
complements the quality image. Multi-purpose, digital instrumentation
includes speedometer, odometer, tripmeter, fuel gauge, engine
temperature indicator, clock, and hour meter. Indicator lamps for EPS,
neutral, reverse gear, 2WD/4WD, belt indicator, and oil warning are also
fitted. (Photo 17)
17
Wheels
NEW
* Cast aluminium
wheels – standard
equipment (a first
for a Japanese ATV)
– contribute to the
sharp looks and
quality image. 16
(Photo 16)
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 7
COLOURS
KVF750G:
* Scout Green
* Super Black
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 8
COLOURS
KVF750H:
* Camouflage Realtree APG
KVF750J (Special Edition):
* Metallic Tungsten Gray
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
1 9
SPECIFICATIONS
KVF750GCF/HCF/JCF
ENGINE
FRAME
Type
Liquid-cooled, 4-stroke 90° V-twin
Displacement
749 cc
Bore and Stroke
85 x 66 mm
Compression ratio
9.3:1
Valve system
SOHC, 4 valves per cylinder
Fuel system
Fuel injection: ø36 mm x 2
Ignition
Battery & Coil (Transistorised ignition)
Caster (rake)
2°
Starting
Electric
Trail
12 mm
Lubrication
Forced lubrication, wet sump
Tread (front/rear)
925 mm / 890 mm
Steering angle (left/right)
47° / 47°
DRIVETRAIN
Type
Double cradle, high-tensile tubular
steel
Wheel travel: front
169 mm
rear
190 mm
front
AT 25 x 8-12
rear
AT 25 x 10-12
Tire:
SUSPENSION
Transmission
Dual range CVT with reverse
Final drive
2WD / 4WD, shaft
Primary reduction ratio
3.122 ~ 0.635 (belt converter)
Gear ratios:
Front: Type
Double wishbone with 5-way
adjustable spring preload
Rear: Type
Double wishbone with 5-way
adjustable spring preload
Forward (High)
2.884 (29/27 x 29/18 x 20/12)
Forward (Low)
4.833 (36/20 x 29/18 x 20/12)
Reverse
4.028 (16/12 x 18/16 x 29/18 x 20/12)
Final reduction ratio
4.375 (35/8)
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
2 0
SPECIFICATIONS
BRAKES
Front brakes
PERFORMANCE
Dual 200 mm discs with
Maximum power
37 kW {50 PS} @ 6,750 rpm
Maximum torque
59 N.m {6.0 kgf.m} @ 5,250 rpm
Minimum turning radius
3.2 m
Towing capacity
567 kgs (1,250 lbs.)
2-piston calipers
Rear brake
Enclosed wet multi-plate
Parking brake
Enclosed wet multi-plate
DIMENSIONS
Up to 3 years
Overall length
2,195 mm
Overall width
1,180 mm
Overall height
1,220 mm
Wheelbase
1,285 mm
additional
coverage
with the Good Times™
Protection Plan*
* Depending on the program purchased.
M O N T H S
Extend your protection
To view our
complete accessory
catalogue visit:
kawasaki.ca/accessories
Ground clearance:
At centre of chassis
240 mm
Seat height
910 mm
Curb mass*
315 kg
Fuel capacity
19 litres
Warranty
12 months
The specifications mentioned here apply to and have been achieved by production models under
standard operating conditions. We intend only to give a fair description of the vehicle and its
performance capabilities but these specifications may not apply to every machine supplied for
sale. Kawasaki Heavy Industries, Ltd. and Canadian Kawasaki Motors Inc. reserves the right to
alter specifications without prior notice. Equipment illustrated and specifications may vary to meet
individual markets.
* Includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90% of capacity) and tool kit (if supplied)
2 0 1 2 M Y B r u t e F o r c e 7 5 0 4 x 4 i E P S M O D E L I N F O R M AT I O N
2 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement