IMPORTANT SAFETY

INSTRUCTIONS

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your AC power outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Portable Cart Warning

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally, or has been dropped.

DISC FORMATS

The unit can playback

DVDs

[8cm/12cm disc]

Audio CDs

[8cm/12cm disc]

Compatible

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the

Region Management Information that is encoded on DVDs. If the region number printed on the

DVD does not correspond to the region number of this unit, it cannot play that disc.

The region number of this unit is 1.

Disc Function or Operation that is Not Available

When the symbol appears on the screen, it indicates that the function or operation attempted is not available at that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions may not be available on some DVDs. Be sure to read the documentation provided with the DVD.

Icons Used on DVDs

Sample lcons

Language selections for audio

Language selections for subtitles

Screen aspect ratio

Multiple camera angles

1 Region code indicator

Note:

• When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic images will not be shown.

Title, Chapter and Tracks

• DVDs are divided into “titles” and “chapters”. If the disc has more than one movie on it, each movie would be a separate “title”. “Chapters” are sections of titles.

Title 1

Chapter 1 Chapter 2 Chapter 3

Title 2

Chapter 1 Chapter 2

• Audio CDs are divided into “tracks”. A “track” is usually one song on an Audio CD.

Track 1 Track 2 Track 3 Track 4 Track 5

Note:

• Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them, but some do not.

Notes on Unauthorized Discs

You may not be able to play some DVDs on this unit, particularly if they were purchased from outside your geographic area or made for business purposes.

ACCESSORIES

Please check and identify the supplied accessories.

• To order accessories visit web site http://www.1800customersupport.com/audiovox

AC Adapter .................................................................................................................... x 1

Car Power Adapter ........................................................................................................ x 1

Headphones ................................................................................................................. x 1

Mounting Strap ............................................................................................................... x

1

E - 2

2

1

CONTROL REFERENCE GUIDE

3 4 5 6 7 8 9 10

16

17

1) LCD Screen

2) CURSOR ( , , , ) buttons

Use to highlight selections on a menu screen and adjust certain settings.

SEARCH Button

Press and hold for more than 2 seconds to perform fast reverse playback.

3)

SEARCH Button

Press and hold for more than 2 seconds to perform fast forward playback.

PREV Button

Press and hold for more than 2 seconds to go back to current or previous chapters/tracks.

NEXT Button

Press and hold for more than 2 seconds to advance chapters/tracks.

OPEN Button

Press the OPEN button and hold the front panel to open the disc door.

4) SETUP Button

In stop mode, open and close the

SETUP menu.

In play mode, adjust Brightness,

Contrast, Color or View Mode of the

LCD screen.

5) AUDIO Button

Select one of the audio sound tracks programmed on a DVD or select the audio output mode on an Audio CD.

6) SUBTITLE Button

Select one of the subtitle languages programmed on a DVD.

18

7) MENU Button

Open and close DVD menu.

8) CHARGING Indicator

Charge the built-in rechargeable battery before using it for the first time.

The normal charging time should be completed in approximately 4-5 hours.

The red charging light will go out when the battery becomes fully charged.

9) (CHARGE) / STANDBY(power off) / ON Switch

10) POWER ON Indicator

When the / STANDBY / ON switch is in the ON position, the light will illuminate.

11) PLAY Button

Press to start or resume playback of a disc.

Confirm selections on a menu screen.

12) PAUSE Button

Press to pause playback of a disc.

Each time you press the PAUSE button the picture advances one frame. Press the PLAY button to resume playback.

13) STOP Button

Stop playing a disc.

14) Headphone Jack

15) VOLUME Control

Adjust the volume.

16) AUDIO / VIDEO OUT Jacks

17) DC IN 9V-12V Jack

18) Handhelds

CONNECTIONS

A. Connecting a TV

• If your TV has Audio/Video inputs, you can connect the unit to your TV using a standard A/V cable (not included).

RIGHT SIDE OF THE UNIT

AUDIO/VIDEO CABLE

(not included)

Watching a DVD on your TV

1. Turn on the unit.

2. Turn on the TV and follow the instructions included with it to play the DVD.

Yellow

Red

White

TV

VIDEO

IN

R

AUDIO

IN

L

B. Using Headphones

• Turn down the volume before connecting, and then adjust the level.

• When headphones are connected, no sound will be emitted from the unit's speaker.

RIGHT SIDE OF THE UNIT

Headphones

(3.5mm diameter plug)

Caution:

Avoid listening to sound at levels which may be harmful to your ears.

E - 3

11

12

13

14

15

POWER SUPPLY

A. Using the AC Adapter

The supplied AC adapter operates on AC 120V.

RIGHT SIDE OF THE UNIT

Cautions:

• The AC adapter included with this unit is for its use only. Do not use it with other equipment.

• When the unit is not going to be used for long time, disconnect the AC adapter from the AC power outlet.

• When the AC adapter is plugged in, the apparatus is not completely disconnected from the main power supply, even when the power is turned off.

2

To AC power outlet

AC ADAPTER

(DC 9V 1.5A)

1

To DC IN 9V-12 V jack

B. Using the Car Power Adapter

The 12V car power adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system.

RIGHT SIDE OF THE UNIT

CAR POWER ADAPTER

WARNING:

Disconnect the car power adapter when not in use. Not for use in

24V vehicles.

1

To DC IN 9V-12 V jack

2 To the cigarette lighter socket

CAUTION:

For continued protection againt risk of fire, replace only with same type and rating of fuse.

Fuse Replacement instructions

Press and hold

FUSE Press and hold

Cautions:

• Use this unit only with the included 12V car power adapter; use with other car adapters could damage the unit .

• The 12V car power adapter included with this unit is for its use only. Do not use it with other equipment.

• In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.

• Make sure the unit is fastened securely to prevent it from falling or flying through the air in the event of an accident.

• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.

• After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.

C. Using the Built-in Battery

The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before using it for the first time. The normal charging time should be completed within 4-5 hours.

The red charging light will go out when the built-in battery becomes fully charged.

To Recharge the Built-in Battery

Warnings:

• The built-in battery can only be recharged when the unit is in using the AC adapter.

(CHARGE) mode while

• The built-in battery cannot be recharged when the unit is in power ON mode.

• Do NOT recharge the built-in battery in a vehicle using the car power adapter.

Notes:

• When the built-in battery power is low, the unit will stop playing.

• Recharge the built-in battery when you are ready to use it again.

• While using the built-in battery, the environmental temperature should be 5°C (41°F) to

35°C (95°F).

• To get the longest service life of the built-in battery battery, charge at indoor-temperature.

• The built-in battery in this device may present a risk of fire or chemical burn if mistreated.

Do not disassemble, heat above 100 o C (212 o F), or incinerate.

• The unit should not be exposed to excessive heat such as sunshine, fire or the like.

• When discarding the unit, environmental problems must be considered and local rules or laws governing the disposal of such products must be strictly followed.

Turning on the Unit

1. Slide the / STANDBY / ON switch to the ON position.

2. The DVD logo (start-up picture) will appear on the screen.

3. After use, slide the off) position.

/ STANDBY / ON switch to STANDBY (power

E - 4

SOUND SYSTEM

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby

Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel soundtracks available on many DVDs.

Manufactured under license from Dolby Laboratories.

'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.

PLAYING A DISC

Basic playback

This owner’s manual explains the basic instructions for operating this unit. Some

DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS

NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD.

“ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc.

Playing a Disc

1. Slide the / STANDBY / ON switch to the ON position.

See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.

2.

Press the OPEN button and hold the front panel to open the disc door.

3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing you, pushing gently until you hear a

“click”.

4. Gently push the disc door closed until it locks.

It takes a short while for your unit to load the disc. After loading, the unit will automatically bring you to the main menu of the DVD or start playing the DVD.

5. If the unit does not automatically start playing the DVD, press the PLAY button.

Pausing Playback (Still Mode)

Press the PAUSE button. To resume normal playback, press the PLAY button.

Each time you press the PAUSE button, the picture advances one frame.

Stopping Playback

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button.

If you press the STOP button twice, the unit’s memory will be cleared and pressing the

PLAY button will reset the disc to the beginning.

Fast Forward / Fast Reverse

1. Press and hold the SEARCH or SEARCH button for more than 2 seconds when a disc is playing. Each time you press and hold the SEARCH or SEARCH button for more than 2 seconds , the playback speed changes in the following sequence: x 2 x 4 x 8 x 16 x 2 x 4 x 8 x 16

2. Press the PLAY button when you reach the desired point to resume normal playback.

Notes:

• The DVD player mutes sound and subtitles during reverse and forward scan of the disc.

• The fast playback speed may differ depending on the disc.

Skip (Forward / Reverse)

Press and hold the NEXT button for more than 2 seconds to advance chapters/tracks.

Press and hold the PREV button for more than 2 seconds to go back to current or previous chapters/tracks.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred language and sound system.

1. While a disc is playing, press the AUDIO button to show the current audio format number.

2/4

2. Press the AUDIO button repeatedly to select the desired audio format.

D 2 Ch Eng

Notes:

• If only one audio format is recorded on the DVD, the number does not change.

• Some DVDs allow you to change audio selections only via the disc menu. If this is the case, press the MENU button and choose the appropriate language on the disc menu.

• You can select different audio channels (Stereo, Left or Right) on an Audio CD by pressing the AUDIO button repeatedly.

Subtitle Selection DVD

1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example.

1/3 Fre

2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn subtitles off by pressing the SUBTITLE button repeatedly until the “

Off

” is displayed.

Notes:

• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set the subtitle function to off.

• During some scenes, the subtitles may not appear immediately after you select your desired scene.

• The number of subtitle languages recorded differs depending on the disc. If only one language is recorded, the language does not change.

• This function can only be used for discs on which subtitles have been recorded in multiple languages.

• Some DVDs allow you to change subtitles only via the disc menu. If this is the case, press the MENU button and choose the appropriate subtitle on the disc menu.

E - 5

VIEWING JPG FILES

This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).

Viewing JPG Files

1.

Press the OPEN button and hold the front panel to open the disc door.

2. Hold a JPG file disc by its edges and gently push it onto the spindle with the label side facing you until you hear a

“click”.

3. Gently push the disc door closed until it locks. A list of folders/files will appear on the screen.

4. Press the or button to select your desired file. The selected picture will appear at the lower right corner. Press the PLAY button to start playback. Press the STOP button to display a folder list.

Notes:

• You can press the PAUSE button to interrupt playback. Press the PLAY button to resume playback.

• You can press the STOP button to stop playback.

• You can press and hold the PREV or NEXT button for more than 2 seconds to change the picture.

Press and hold the PREV button for more than 2 seconds to view the previous picture.

Press and hold the NEXT button for more than 2 seconds to view the next picture.

• You can press Cursor buttons ( , , , ) to rotate direction of the picture.

• Some discs may not permit this operation.

PROGRAM MODE FOR CD OR CD-ROM

Program Mode for CD or CD-ROM

1. In Stop mode, press Cursor buttons ( , , , ) to select "Edit mode" then press the PLAY button.

2. Use Cursor buttons ( , , , ) to select tracks/files shown on the left hand side of the window. Press the

PLAY button to confirm the selected tracks/files. " " will appear in front of the selected tracks/files.

3. Select "Add to program", then press the PLAY button.

" " will disappear from the screen. It means that the tracks/files you have selected are added into the Program view.

4. Select "Program view" to view programmed files. To add more files by "Browser view" follow above steps.

5. Select "Edit mode" again to exit.

6. Use Cursor buttons ( , , , ) to select tracks/files on the left hand side of the window, then press the PLAY button to start the program playback.

Note:

The program will be deleted if disc door is opened or selected files are deleted by selecting

"Clear program" in "Edit mode".

CUSTOMIZING THE FUNCTION SETTINGS

Language

OSD Language

1. Press the SETUP button in stop mode.

2. Press the button to select OSD Language.

3. Press the PLAY button, then the / button to shift and change the Language.

4. Press the PLAY button.

5. Press the SETUP button to exit the menu.

Subtitle

1. Press the SETUP button in stop mode.

2. Press the button, then the / button to select

Subtitle.

3. Press the PLAY button, then the / button to shift and change the Language.

4. Press the PLAY button.

5. Press the SETUP button to exit the menu.

Notes:

• Some DVDs may be set to display subtitles in a different language other than the ones selected. A prior subtitle language may be programmed on the disc.

• Some DVDs allow you to change subtitle selections only via the disc menu. If this is the case, press the MENU button and choose the appropriate subtitle language from the selection on the disc menu.

Audio

1. Press the SETUP button in stop mode.

2. Press the button, then the / button to select

Audio.

3. Press the PLAY button, then the / button until your preferred Audio is displayed.

4. Press the PLAY button.

5. Press the SETUP button to exit the menu.

Note:

• Some DVDs may not be played in the language selected. A prior language may be programmed on the disc.

E - 6

DVD Menu

1. Press the SETUP button in stop mode.

2. Press the button, then the / button to select

DVD Menu.

3. Press the PLAY button, then the / button until your preferred DVD Menu language is displayed.

4. Press the PLAY button.

5. Press the SETUP button to exit the menu.

Note:

• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically displays disc menus consistent with the disc's initial language setting.

Video

Aspect Ratio

1. Press the SETUP button in stop mode.

Aspect Ratio

2. Press the / button to select Video.

3. Press the button, then the / button to select

Aspect Ratio.

4. Press the PLAY button, then the / button to shift and change the aspect ratio.

5. Press the PLAY button.

6. Press the SETUP button to exit the menu.

Notes:

• The displayable picture size is preset on the DVD. Therefore, the playback picture of some

DVDs may not conform to the picture size select.

• When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3 picture size regardless of the Aspect Ratio setting.

• Select 16:9 to conform the LCD screen on the unit. Always be sure that your Aspect Ratio conforms to the actual TV in use if you connect the unit to a TV.

View Mode

1. Press the SETUP button in stop mode.

2. Press the / button to select Video.

3. Press the button, then the / button to select

View Mode.

4. Press the PLAY button, then the / button to shift and change the View Mode.

5. Press the PLAY button.

6. Press the SETUP button to exit the menu.

Fill Fill the screen with decoded image.

Original Display image as it’s original size.

Auto Fit Automatically fit the decoded image on screen without distortion. Black bars will be present on top/bottom or left/right of screen.

Pan Scan Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your

TV screen. Sides of the picture are cut off.

Note:

• Depending on the DVDs, you may not be able to view the mode as selected.

In play mode, you can adjust Brightness, Contrast, Color or View Mode of the LCD screen.

Brightness / Contrast / Color / View Mode

1. Press the SETUP button when the DVD player is in play mode.

2. Press the / button to select Brightness, Contrast, Color or View Mode.

3. Then press the / button to change the setting. (For View Mode, press the PLAY button to change the setting.)

4. Press the SETUP button to exit the menu.

Misc

Use Default Settings

1. Press the SETUP button in stop mode.

2. Press the / button to select Misc.

3. Press the button, then press the / button to select “Use Default Settings” dialogue box.

4. Press the PLAY button, then press the / button to select “Yes”. Press the PLAY button and the original setting will be restored. The unit will exit setting menu automatically and re-load the disc in the disc tray.

Note:

• It will take 3-5 seconds to reset the DVD player to the factory default.

Screen Saver

1. Press the SETUP button in stop mode.

2. Press the / button to select Misc.

3. Press the button, then press the / button to select Screen Saver.

4. Press the PLAY button, then press the / button to change the On/Off mode.

5. Press the PLAY button.

6. Press the SETUP button to exit the menu.

E - 7

MAINTENANCE

Cleaning the Disc

A defective or soiled disc inserted into the unit can cause sound to drop out during playback.

Handle the disc by holding its inner and outer edges.

• Do NOT touch the surface of the unlabeled side of the disc.

• Do NOT stick paper or tape on the surface.

• Do NOT expose the disc to direct sunlight or excessive heat.

• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.

• NEVER use solvents such as benzine or alcohol to clean the disc.

• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.

Cleaning the Unit

• Be sure to turn the unit off and disconnect the AC adapter before maintaining the unit.

• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak soap-and-water solution and wrung out thoroughly. Wipe with a dry cloth.

• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.

Important Note

Before transporting the unit, remove any disc from the disc compartment.

TROUBLESHOOTING GUIDE

SYMPTOM CAUSE (AND REMEDY)

No power.

• Ensure the AC adapter or car power adapter is connected.

• The built-in battery power is low, recharge it.

• The unit is not turned on.

DVD

No sound or only a very low-level sound is heard.

• Make sure that you select ON mode.

• The system is in pause mode. Press the PLAY button to return to normal play mode.

• The unit is in fast-forward or fast-reverse mode. Press the PLAY button to return to normal play mode.

• Make sure the AUDIO/VIDEO output connections are correct.

• The DTS DVD cannot be decoded to have speaker output.

• The unit is too hot; shut off the unit for 30 minutes to cool it down.

No picture • The region number of the disc doesn't match the region number of this unit.

The picture is not clear

• Clean the disc.

• The disc is scratched.

• Please adjust the LCD's brightness, contrast and color using the SETUP button.

Severe hum or noise is heard.

The disc does not play.

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

• Clean the disc.

• There is no disc inside (“No Disc” appears on the screen).

• Insert the disc correctly with the playback side facing down.

• Clean the disc.

• A non-NTSC disc has been inserted. The unit and disc region number are incompatible.

• Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again.

PLACEMENT

A. Holding in Hands

Hold the unit by grasping it on the left and right sides.

B. Using the Stand

You can stand the unit up on a desk or table using the stand on the back.

C. Mounting in the Vehicle

Use the supplied mounting strap to install the unit on the back of the vehicle's headrest. Tightly wrap the mounting strap around the headrest.

Mounting

Strap

Mounting

Strap

Car Power

Adapter

Mounting

Strap

SAFETY WARNING!

• This unit should never be used by the vehicle's driver or left unsecured in the vehicle while driving.

• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct any safety device, including air bags or seat belts.

• All passengers should wear seat belts when using this unit in a moving vehicle.

• If in doubt, please contact your vehicle manufacturer for further advice.

Specifications and external appearance are subject to change without notice.

Need More Help?

DO NOT RETURN THIS PRODUCT TO THE STORE

Please call Customer Service at 800-894-0956 or visit online help at http://www.1800customersupport.com/audiovox

Printed in China 811-636091W010

PVS6360

6.2” Handheld

DVD Player

Owner’s Manual

SAFETY PRECAUTIONS

WARNING:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE. DO NOT PLACE

OBJECTS FILLED WITH LIQUIDS ON OR

NEAR THIS UNIT.

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.

* SEE BACK OF UNIT FOR GRAPHIC

SYMBOLS *

THIS CLASS B DIGITAL APPARATUS

COMPLIES WITH CANADIAN ICES-003.

This product contains a low power laser device.

On Placement

• Do not use the unit in places which are extremely hot, cold, dusty, or humid.

• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on carpeting.

On Safety

• When connecting or disconnecting the AC adapter, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.

• When you are not going to use the unit for a long period of time, disconnect the AC adapter.

On Condensation

• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before use.

Rating Plate Location

• The rating plate is located on the back of the unit.

FCC Statements

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an AC power outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

WARNING: Should any trouble occur, disconnect the AC adapter and refer servicing to a qualified technician.

Notes on Copyright

U.S. Patent Nos. 4,907,093; 5,315,448 and 6,516,132.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

E - 1