LC-45G1H TU-45GAH

LC-45G1H TU-45GAH

SHARP CORPORATION

Printed on 100% post-consumer recycled paper.

Printed in Japan

TINS-B662WJZZ

04P11-JKG

45oDISPLAY/

LC-45G1H

AVC SYSTEM/

TU-45GAH

LCD COLOUR TELEVISION

OPERATION MANUAL

LC-45G1H

TU-45GAH

LCD COLOUR TELEVISION

ENGLISH

OPERATION MANUAL

Contents

Contents …………………………………………………… 1

Trademarks ………………………………………………… 2

Dear SHARP customer …………………………………… 3

Important Safety Precautions ………………………… 3

Supplied accessories …………………………………… 5

Optional accessories ………………………………… 5

Preparation ………………………………………………… 6

Where to place the System …………………………… 6

Setting the System …………………………………… 7

Setting the AVC System with the stand …………… 9

Setting the Display on the wall ……………………… 10

Removing the stand and speaker …………………… 11

Inserting the batteries ………………………………… 12

Using the remote control unit ………………………… 12

Cautions regarding remote control unit ……… 12

Basic connection ……………………………………… 13

Connecting to an antenna ……………………… 13

Connecting to the power outlet ………………… 13

Part names ………………………………………………… 14

Display ………………………………………………… 14

AVC System …………………………………………… 15

Remote control unit …………………………………… 16

Watching TV ……………………………………………… 17

Turning on the power ………………………………… 17

Turning off the power ………………………………… 17

Simple button operations for changing channels … 18

Using Flashback (A) on the remote control unit … 18

Simple button operation for changing volume/sound …………………………………… 20

Basic adjustment settings ……………………………… 21

Menu operation buttons ……………………………… 21

On-Screen Display …………………………………… 21

TV/AV input mode menu items ……………………… 22

PC input mode menu items ………………………… 22

Auto installation ……………………………………… 23

Programme setup ……………………………………… 23

Auto search ……………………………………… 23

Manual setting for each channel ……………… 24

Search tuning ………………………………… 24

Fine tuning …………………………………… 24

Colour system ……………………………… 25

Sound system (Broadcasting system) …… 25

Labelling channels ………………………… 25

Skipping channels ………………………… 26

Setting the child lock ……………………… 26

Password setting for child lock (for TV input mode) See page 56.

Setting the booster ………………………… 26

Sort ………………………………………………… 27

Erase Programme ………………………………… 27

Language setting for on-screen display …………… 28

OPC (Optical Picture Control) setting ……………… 28

Picture adjustments …………………………………… 29

C.M.S. (Colour Management System) ………… 30

Colour temperature ……………………………… 30

Sharpness Enhancement ……………………… 30

Automatic Contrast ……………………………… 30

I/P setting ………………………………………… 31

Film mode ………………………………………… 31

3D-Y/C …………………………………………… 31

Monochrome ……………………………………… 31

Audio adjustment ……………………………………… 32

Dolby Virtual ……………………………………… 32

Power control ………………………………………… 33

Power control for AV source …………………… 33

Power control for PC source …………………… 33

Using memory card ……………………………………… 34

Important notes on using memory cards …………… 34

Card Setup mode menu items ……………………… 36

Recording a still image ……………………………… 37

Displaying a still image ……………………………… 38

Displaying slide show ………………………………… 38

Setting Slide Show …………………………………… 38

My Programme ………………………………………… 39

Audio Select …………………………………………… 39

Protecting/unprotecting still image files …………… 39

Deleting a still image file ……………………………… 40

Deleting all still image files …………………………… 40

Recording a motion picture ………………………… 40

Displaying a motion picture ………………………… 41

Rec. Mode ……………………………………………… 41

Pre-recording ………………………………………… 41

Repeat ………………………………………………… 41

Protecting/unprotecting motion picture files ……… 42

Deleting a motion picture file ………………………… 42

Deleting all motion picture files ……………………… 42

Format ………………………………………………… 42

1

LC-45G1H(E)-a 1 04.10.18, 6:37 AM

Contents

Using external equipment ……………………………… 43

Displaying an external equipment image ………… 43

Displaying a DVD image (Example) ………………… 43

When connecting a game console using composite cable ………………………………… 44

When connecting a VCR using S-video cable …… 44

When connecting a DVD player or an HDTV tuner using component cable ………………………… 45

Connecting a game console or camcorder ………… 45

Connecting a PC ……………………………………… 46

Speaker Setup ………………………………………… 47

Connecting external speakers ………………… 47

Selecting speakers ……………………………… 47

External Audio Bypass ………………………… 47

Useful adjustment settings ……………………………… 48

Image position (for TV/AV input mode) ……………… 48

Audio Only ……………………………………………… 48

Auto Sync. adjustment (PC input mode only) ……… 48

Fine Sync. adjustment (PC input mode only) ……… 49

Input Select …………………………………………… 49

Input Label …………………………………………… 50

Colour system setting (for TV/AV input mode) …… 50

AV mode selection …………………………………… 51

WIDE mode (for TV/AV input mode) ………………… 52

WIDE mode (for PC input mode) …………………… 53

Input signal (PC input mode only) …………………… 54

3D-NR (3D Noise Reduction) ………………………… 54

Quick Shoot …………………………………………… 54

Rotate …………………………………………………… 54

Mosquito Noise Reduction …………………………… 55

Audio out ……………………………………………… 55

Sleep timer …………………………………………… 55

Password setting for child lock

(for TV input mode) ……………………………… 56

Centre Channel Input ………………………………… 57

Useful features …………………………………………… 58

Dual screen functions ………………………………… 58

Appendix ………………………………………………… 59

Troubleshooting ……………………………………… 59

PC compatibility chart ………………………………… 60

Connecting pin assignments for SCART …………… 60

RS-232C port specifications ………………………… 61

Specifications ………………………………………… 63

Dimensional drawings …………………………………… 64

Trademarks

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

2

LC-45G1H(E)-a 2 04.10.18, 6:37 AM

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product.

Important Safety Precautions

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD colour TV product, please read the following precautions carefully before using the product.

1.

Read instructions—All operating instructions must be read and understood before the product is operated.

2.

Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future reference.

3.

Observe warnings—All warnings on the product and in the instructions must be observed closely.

4.

Follow instructions—All operating instructions must be followed.

5.

Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents.

6.

Power source—This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

7.

AC cord protection—The AC cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.

8.

Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.

9.

Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

10. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing.

11. Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs.

a. When the AC cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing.

12. Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

13. Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

3

LC-45G1H(E)-a 3 04.10.18, 6:37 AM

4

LC-45G1H(E)-a

Important Safety Precautions

• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

• Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

• Do not place vases or any other water-filled containers on this product.

The water may spill onto the product causing fire or electric shock.

• Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

4

• The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken be careful not to be injured by broken glass.

• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products

(including amplifiers).

• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.

• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.

The LCD panel is a very high technology product with 6,220,800 thin film transistors, giving you fine picture details.

Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red.

This is within product specifications and does not constitute a fault.

Precautions when transporting the Display

When transporting the Display, never carry it by holding onto the speakers. Be sure to always carry the Display by two people holding it with two hands—one hand on each side of the display.

Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Selecting the location—Select a place with no direct sunlight and good ventilation.

04.10.18, 6:37 AM

Supplied accessories

Make sure the following accessories are provided with the product.

AVC System

Remote control unit “AAA” size battery (g2) System cable

Page 12

Stand unit (for AVC System)

Page 12

AC cord

Page 7

RCA/SCART conversion connector (g3)

Page 7

Operation manual

For INPUT2 and 3 (g2)

For INPUT1

(g1)

Pages 44 and 45

Display

Stand (g1)

Stand cushion (g4)

Stand spacer (g4)

Stand screw (g2)

Page 9

Cable clamp

LC-45G1H(E)-a

Page 8

5

AC cord

Page 7

Optional accessories

The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop.

• Additional optional accessories may be available in near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

Part name

Wall mount bracket

Part number

AN-37AG2

5

04.10.18, 6:37 AM

Preparation

Where to place the System

“System” means the Display and AVC System. First select the location where to place the System.

1

Selecting the location of the System

• Select a place with no direct sunlight and good ventilation.

• Select a place where it is flat and without a slope.

• The Display and the AVC System are connected by the system cable.

(See page 7 for details.)

6

LC-45G1H(E)-a

System cable

2

AVC System

Display

Setting the System in place

Handling the Display

CAUTION

When using the TV with the supplied stand attached, do not

remove the speaker. Doing so may disturb the balance leading to product damage or personal injury.

• Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.

• Keep enough space above and behind the Display.

• When you move the System, carry it by two or more people.

• When you move the Display, hold the portion of the Display, not the speaker.

Handling the AVC System

CAUTION

• Do not put a VCR or other device on the AVC System.

• Keep enough space above and on the sides of the AVC System.

• Do not block the ventilation openings on the top and left side, and the exhaust fan on the right side.

• Do not spread a thick cloth beneath the AVC System, or cover it with one, as this can cause overheating and result in malfunction.

CAUTION

Adjust the screen with both hands. Put one hand on the

Display and rotate the screen while steadying the stand with your other hand.

You can adjust the screen horizontally up to 10 degrees. Please note that you cannot adjust the screen vertically with this model.

10 cm or more

5 cm or more

Keep enough space

5 cm or more on both sides

There is an exhaust fan on the right side.

04.10.18, 6:37 AM 6

Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables.

1

Removing the terminal cover

Display (rear view)

Press the two hooks toward the centre of the

Display and remove the cover toward you.

Press down the four upper hooks to remove the cover toward you.

2

Connecting the system cable and the AC cord to the Display

3

(WHITE)*

Connect the plug into the terminal and secure it by tightening the thumb screws.

AC cord

• Plug in the AC cord completely into the terminal.

(BLACK)

System cable

(GREY)**

Connect the plug firmly until the hooks on both sides click.

Connecting the system cable and the AC cord to the AVC System

System cable

• Check the alignment of the terminals before inserting.

(WHITE)*

AVC System (rear view)

(BLACK) (GREY)**

AC cord

CAUTION

TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE

AC CORD CONNECTED.

NOTE

* When you unplug the WHITE system cable, make sure you unscrew the screws thoroughly before unplugging the cable.

** When you unplug the GREY system cable, press the hooks on both sides of the cable inward as you unplug the cable gently.

7

LC-45G1H(E)-a 7 04.10.18, 6:37 AM

Preparation

4

Attaching the clamp and bundling the cables with the clamp

Fasten the speaker cable with the holder.

5

Cable clamp

Insert the cable clamp in the hole on the Display as shown.

Closing the terminal cover

Cables come out from the small opening.

8

LC-45G1H(E)-a 8 04.10.18, 6:37 AM

Preparation

Setting the AVC System with the stand

How to install the AVC System vertically using the stand unit

• Use the supplied stand unit for installing the AVC System vertically in an upright position.

1

Stick each spacer to the stand as shown.

Peel each spacer away from the paper and attach to the four bulging areas on the stand.

Stand spacer

Bulge

2

Attach each cushion to the stand as shown.

Peel each cushion away from the paper and attach to the four areas at the bottom.

Stand cushion

Attaching point

3

Fit the stand to the AVC

System.

Insert the stand into the AVC

System, making sure that the thick and thin bulges of the stand align with the big and small holes on the AVC

System.

Bulge

Attaching point

Bulge

Hole

4

Attach the stand using the stand screws as shown.

Stand screw

The AVC System installed vertically with the stand.

NOTE

• When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when standing up directly on the floor or a flat surface as this can result in equipment failure.

LC-45G1H(E)-a 9 04.10.18, 6:38 AM

9

Preparation

Setting the Display on the wall

• You can mount the Display on the wall, using the optional AN-37AG2 bracket.

• For details, refer to the instructions supplied with the optional bracket.

CAUTION

Installing the Display requires special skill that should only be performed by qualified service personnel. Customers

should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

About setting the Display angle

Hanging on the wall

AN-37AG2 wall mount bracket. (See the bracket instructions for details.)

10˚

Angle of Display

With Speakers

Removed

10˚

With Speakers

Attached

Vertical mounting Angular mounting

10

LC-45G1H(E)-a 10 04.10.18, 6:38 AM

Preparation

Removing the stand and speaker

• You can remove the speaker from the Display.

• You can connect your own speakers (4

Ω, 10 W) to the AVC System. (See page 47.)

• For wall mounting with the optional AN-37AG2 bracket, remove the stand.

• When connecting your own speakers, remove the original speaker from the Display first.

Before attaching/detaching stand

• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

• Remove all terminal covers and connected cables.

• Lay the Display down on cushioning (such as a blanket) over a table.

• Make sure two or more people perform the operation.

CAUTION

Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.

When using the Display with the supplied stand attached, do not remove the speaker. Doing so may

disturb the balance leading to product damage or personal injury.

1

2

3

Unfasten the four screws used to secure the stand in place.

Detach the stand from the Display.

(Hold the stand so it will not drop from the edge of the base area.)

Unfasten the screw used to secure the speaker bracket.

4 5 6

Take off the speaker terminal cover.

7

Disconnect the cable from the speaker.

Unfasten the screws.

• Perform the steps 3 to 6 on the both sides of the speaker to remove it.

1 Now the speaker can be removed from the TV.

2 Connect your speakers. (See page 47.)

NOTE

• To attach the speaker and stand, perform the above steps in reverse order.

LC-45G1H(E)-a 11 04.10.18, 6:38 AM

11

Preparation

Inserting the batteries

Before using the System for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1

Open the battery cover.

2

Insert two supplied “AAA” size batteries.

3

Close the battery cover.

• Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

Using the remote control unit

Use the remote control unit by pointing it towards the remote sensor window.

Objects between the remote control unit and sensor window may prevent proper operation.

30

°

30

°

Remote control sensor

12

Cautions regarding remote control unit

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight.

The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote sensor window of the Display is under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display, or operate the remote control unit closer to the remote sensor window.

LC-45G1H(E)-a 12 04.10.18, 6:38 AM

Preparation

Simple operations for watching a TV programme

Basic connection

Connecting to an antenna

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.

Standard DIN45325 plug (IEC169-2)

75-ohm coaxial cable (round cable)

Antenna cable

(Commercially available)

Connecting to the power outlet

Before connecting the AC cords, make sure to connect the system cable first.

Display (rear view)

AVC System (rear view)

NOTE

• Always turn off the main power of Display when connecting the AC cords.

• Disconnect the AC cords from the AC outlet, Display and AVC System if the System will not be used for a long period of time.

LC-45G1H(E)-a 13 04.10.18, 6:38 AM

13

Part names

Display

Channel up (r)/down (s) buttons

(CHs/r)

Volume up (k)/down (l) buttons

(VOL l/k )

TV/VIDEO button

POWER (On/Off) button

14

LC-45G1H(E)-a

Remote control sensor

OPC sensor*

POWER indicator

OPC indicator

Remote control indicator

14 04.10.18, 6:38 AM

*OPC: Optical Picture Control

(See page 28.)

Part names

AVC System

Front view

POWER button

POWER indicator

INPUT 4 terminal (VIDEO)

CARD indicator

INPUT 4 terminal

(S-VIDEO)

INPUT 4 terminal (AUDIO L/R)

How to open the door.

RESET*

SYSTEM RESET**

Headphone

(When connecting headphones, the sound from the speakers is muted.)

PC CARD slot

* Press RESET if the System cannot return to its original state after performing various operations.

This will reset the System as shown below.

• AV MODE resets to USER.

• TV channel resets to channel 1.

• Dual screen resets to normal.

• Audio setting initialises.

• Dolby Virtual resets to Off.

• Image position is initialised.

• Still image mode deactivates.

• Speaker setting resets to SPEAKER-A.

• Audio Out setting resets to Fixed.

• Centre Channel Input setting resets to Off.

• Audio Only setting resets to Off.

** Press SYSTEM RESET if the System does not operate after starting up.

NOTE

• Pressing RESET will not work if the System is in standby mode (indicator lights red).

• Pressing RESET will not delete channel preset and password. See page 56 for resetting the password when you know it.

See page 66 for initialising to the factory preset values in case you forget your password.

Rear view

INPUT 5 terminal

(AUDIO R/L)

INPUT 5 terminal

(DVI-I)

INPUT 3 (Y, P

B

, P

R

)

ANTENNA INPUT terminal

INPUT 1 (SCART)

INPUT 3 (SCART)

RS-232C** terminal

SPEAKER-B terminal

DISPLAY OUTPUT 1 terminal

DISPLAY OUTPUT 2 terminal

AV OUTPUT terminal

(VIDEO)

INPUT 2 (SCART)

DIGITAL AUDIO OUTPUT* terminal

AV OUTPUT terminals

CENTRE CHANNEL

INPUT terminal

(AUDIO L/R)

DISPLAY

OUTPUT 3

DC OUTPUT terminal terminal

(Terminal for expanded functionality in the near future.)

*Connect a digital audio equipment.

**Provided for command from PC (see pages 61 and 62).

AC INPUT terminal

Use RCA/SCART conversion connector to connect with external equipment. Connector without S-video input is

for INPUT 1. Connectors with S-video input are for INPUT 2 and 3.

15

LC-45G1H(E)-a 15 04.10.18, 6:38 AM

Part names

1

2

3

4

5

6

7

8

13

14

15

9

10

11

12

16

17

18

19

20

21

22

Remote control unit

POWER (STANDBY/ON)

To switch the power on and off. (See page 17.)

OPC

To switch the Optical Picture Control on and off. (See page 28.)

P&P

Set the dual picture mode. Press P&P again to return to normal view.

(See page 58.)

SELECT

To select either screen to be active in Dual screen mode.

FREEZE

TV/External input mode: Change the still image mode. (See pages

37 and 58.)

WIDE

TV/External input mode: Change the wide image mode. (See pages

52 and 53.)

CARD

Switch to the card mode.

Card mode: Press to turn the Card Control Panel on and off. (See page 36.)

E REC/REC STOP

Still image: Press to capture a still image to a card after freezing the image from TV or external equipment. (See page 37.)

Motion picture: Press to start/stop recording a motion picture to a card from TV or external equipment. (See page 40.)

0 – 9

TV/External input mode: Set the channel.

A (Flashback)

Press to return to the previous image in normal viewing mode. (See page 18.)

MPX

Select the sound multiplex mode. (See page 19.)

VOLl/VOLk

Set the volume. (See page 20.) e (MUTE)

Mute the sound. (See page 20.)

EXIT

Turn off the On Screen Display.

SLEEP

Set the Sleep timer. (See page 55.)

DISPLAY

Display the programme information.

AV MODE

Select a video setting: AV MODE (STANDARD, MOVIE, GAME, USER,

DYNAMIC), PC MODE (STANDARD, USER) (See page 51.)

3D–Y/C

To switch the 3D-Y/C function on and off. (See page 31.) o (Digit for channel select)

Change the digits of the selected TV channel. (See page 18.)

CHr/CHs

TV input mode: Select the channel.

TV/VIDEO (INPUT SOURCE)

Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4,

INPUT 5, CARD) (See pages 43, 49, 50 and 58.)

MENU

Display the menu screen.

a/b/c/d (Cursor)

Select a desired item on the setting screen.

ENTER

Execute a command.

RETURN

MENU mode: Return to the previous menu screen.

9

10

11

12

7

8

3

4

5

6

1 2

13

14

15

16

NOTE

• When using the remote control unit, point it at the Display.

17

18

19

20

21

22

16

LC-45G1H(E)-a 16 04.10.18, 6:38 AM

Watching TV

Display

POWER indicator

POWER button

Turning on the power

Before turning on the power make sure you have completed required connections. (See pages 7 and 13.)

1

Press POWER button on the Display.

• POWER indicator (blue): The System is on. (After a few seconds, programme information appears with sound.)

• POWER indicator (Red): The System is in standby. (Go to step 2.)

2

Use any of the methods below to power on. Powering on changes the indicator from red to blue.

• Press POWER button on the AVC System.

• Press POWER button on the remote control.

AVC System

POWER button

POWER indicator

Turning off the power

Press POWER button on the remote control unit or POWER button on the Display.

• The System enters standby mode and the image on the screen disappears.

• Both POWER indicators change from blue to red.

Press POWER button on the Display.

• The POWER indicator on the Display gradually turns off.

• When the System is turned off by POWER button on the Display, you cannot turn on the power by pressing POWER button on the remote control.

NOTE

• If you are not going to use this System for a long period of time, be sure to remove the AC cords from the power outlet.

• Weak electric power is still consumed even when both POWER button on the Display and POWER button on the AVC System are turned off.

POWER indicator

Off Power off

Red blue

The System is in standby mode.

The System is on.

NOTE

• Check if the system cable is connected properly when display indicator flashes red.

17

LC-45G1H(E)-b 17 04.10.18, 6:39 AM

Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Using CHr/son the remote control unit

• Press CHr to increase the channel number.

• Press CHs to decrease the channel number.

Channel display

Channel display changes approximately after 3 seconds as shown below.

SAT.1

12

PAL

B/G

(Example)

SAT.1

12

MONO

NOTE

CHs/r on the Display operates the same as CHs/ ron the remote control unit.

Using Flashback (A) on the remote

control unit

CHs/r

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 to

9.

a

To select a 1-digit channel (e.g. channel 2):

• Press 2. If

“2”

is indicated and the picture does not change immediately, press o to switch over to the

1-digit select mode and press 2 again.

To select a 2-digit channel (e.g. channel 12):

• Press o to set the 2-digit select mode. Press 1, followed by 2.

Press A to switch the currently tuned channel to the previously tuned channel.

Press A again to switch back to the currently tuned channel.

Press A to toggle between the currently selected input source and the previously selected one.

NOTE

• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-digit channel mode.

18

LC-45G1H(E)-b 18 04.10.18, 6:39 AM

Watching TV

Using MPX on the remote control unit

In the TV mode of A2 TV broadcasts

When receiving a stereo signal

Each time you press MPX, the mode switches between

STEREO and MONO.

Stereo mode

BBC2

99

STEREO

In the NICAM TV broadcasts

When receiving a stereo signal

Each time you press MPX, the mode switches between

NICAM STEREO and MONO.

Stereo mode

BBC2

99

NICAM

STEREO

BBC2

99

MONO

When receiving a bilingual signal

Each time you press MPX, the mode switches among

CH A, CH B and CH AB.

Bilingual mode

BBC2

99

CH A

BBC2

99

MONO

When receiving a bilingual signal

Each time you press MPX, the mode switches among

NICAM CH A, NICAM CH B, NICAM CH AB and

MONO.

Bilingual mode

BBC2

99

NICAM

CH A

BBC2

99

CH B

BBC2

99

NICAM

CH B

BBC2

99

NICAM

CH AB

BBC2

99

CH AB

When receiving a monaural signal

When you press MPX, “MONO” displays.

Monaural mode

BBC2

99

MONO

NOTE

• When no signal is input, the sound mode will display

“MONO”.

• “BBC2” and “99” are tentative network name and channel.

BBC2

99

MONO

When receiving a monaural signal

Each time you press MPX, the mode switches between

NICAM MONO and MONO.

Monaural mode

BBC2

99

NICAM

MONO

BBC2

99

MONO

19

LC-45G1H(E)-b 19 04.10.18, 6:39 AM

Watching TV

Simple button operation for changing volume/sound

Changing the volume

You can change the volume on the Display or on the remote control unit.

Using e (Mute) on the remote control unit

e mutes the current sound output.

1

Press e.

• The sound is silenced.

• “e” has been displayed on the screen for 30 minutes.

Mute

• To increase the volume, press

VOL

k

• To decrease the volume, press

VOL

l

20

NOTE

• “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5” and “CARD” modes can each store volume adjustment values separately.

When “Audio Out” is set to “Variable”, the indicator on the screen changes as shown below.

20

NOTE

• Within 30 minutes after pressing e, press one of the buttons below to cancel the mute.

VOLf

—e

Mute will be cancelled after 30 minutes. However, the

TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume

level by pressing VOLk.

2

Press e again within 30 minutes to cancel the mute.

• Before 30 minutes, the volume level returns to the previous setting.

Audio status

Output device

Speaker

AV OUTPUT

Fixed

Audio out

Variable

Variable sound Mute

Constant as specified

Variable sound

NOTE

• See page 55 for details on the audio out function.

20

LC-45G1H(E)-b 20 04.10.18, 6:39 AM

Basic adjustment settings

Menu operation buttons

Use the following buttons on the remote control to operate the menu.

MENU:

Press to open or close the menu screen.

a/b/c/d: Press to select a desired item on the screen or adjust a selected item.

ENTER:

Press to go to the next step or complete the setting.

RETURN:

Press to return to the previous step.

CARD:

Press to open or close the Card mode screen.

On-Screen Display

Example

MENU

[Option ... Quick Shoot]

Option

Audio Only

3D-NR [Off]

Mosquito Noise Reduction [Off]

Input Select

Audio Out

[COMPONENT]

[Fixed]

Quick Shoot

Colour System

Centre Channel Input

[On]

[On]

1

2

3

4

1 Item displayed in yellow

• This indicates the item currently selected.

• Press ENTER to go to the adjustment screen for this item.

2 Item in brackets

• This indicates the current setting for the item.

3 Item displayed in white

• This indicates an item can be selected.

4 Item displayed in grey

• This indicates that the item cannot be selected.

*There are various reasons why items cannot be selected, but the main reasons are as follows:

1. Nothing is connected to the selected input terminal.

2. The function is not compatible with the current input signal.

NOTE

• Menu options differ in the selected input modes, but the operating procedures are the same.

• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.

04.10.18, 6:42 AM

21

LC-45G1H(E)-c 21

22

LC-45G1H(E)-c

Basic adjustment settings

TV/AV input mode menu items

List of TV/AV menu items to help you with operations

Picture

OPC ........................................................ Page 28

Backlight ................................................ Page 29

Contrast ................................................. Page 29

Brightness ............................................. Page 29

Colour .................................................... Page 29

Tint ......................................................... Page 29

Sharpness ............................................. Page 29

Advanced

C.M.S. .......................................... Page 30

Colour Temp. .............................. Page 30

Sharpness Enhancement ......... Page 30

Automatic Contrast ................... Page 30

I/P Setting ................................... Page 31

Film Mode ................................... Page 31

3D-Y/C ......................................... Page 31

Monochrome .............................. Page 31

PC input mode menu items

List of PC menu items to help you with operations

Picture

OPC ........................................................ Page 28

Backlight ................................................ Page 29

Contrast ................................................. Page 29

Brightness ............................................. Page 29

Red ......................................................... Page 29

Green ...................................................... Page 29

Blue ........................................................ Page 29

Advanced

C.M.S. .......................................... Page 30

Sharpness Enhancement ......... Page 30

Audio

Treble ..................................................... Page 32

Bass ....................................................... Page 32

Balance .................................................. Page 32

Dolby Virtual .......................................... Page 32

Power Control

No Signal Off ......................................... Page 33

No Operation Off ................................... Page 33

Setup

Auto Installation .................................... Page 23

Programme Setup ......................... Pages 23-27

Child Lock .............................................. Page 56

Input Label ............................................. Page 50

Speaker Setup ....................................... Page 47

Position .................................................. Page 48

Rotate ..................................................... Page 54

Language ............................................... Page 28

Option

Audio Only ............................................. Page 48

3D-NR ..................................................... Page 54

Mosquito Noise Reduction .................. Page 55

Input Select ........................................... Page 49

Audio Out ............................................... Page 55

Quick Shoot ........................................... Page 54

Colour System ...................................... Page 50

Centre Channel Input ........................... Page 57

Audio

Treble ..................................................... Page 32

Bass ....................................................... Page 32

Balance .................................................. Page 32

Dolby Virtual .......................................... Page 32

Power Control

Power Management .............................. Page 33

Setup

Input Label ............................................. Page 50

Speaker Setup ....................................... Page 47

Input Signal ........................................... Page 54

Auto Sync. ............................................. Page 48

Fine Sync. .............................................. Page 49

Rotate ..................................................... Page 54

Language ............................................... Page 28

Option

Audio Only ............................................. Page 48

Input Select ........................................... Page 49

Audio Out ............................................... Page 55

Quick Shoot ........................................... Page 54

Centre Channel Input ........................... Page 57

22 04.10.18, 6:42 AM

Basic adjustment settings

Auto installation

You can run auto installation again, even after setting up the preset channels.

1

Press MENU and the MENU screen displays.

Programme setup

You can run the auto installation procedure again at any time by accessing the Setup menu and

Programme Setup. Channels can be tuned automatically or manually.

Auto search

You can also automatically search and download TV channels by performing the procedure below. This is the same function as programme auto search in auto installation.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

2

Press c/d to select “Setup”.

3

Press a/b to select “Auto Installation”, and then press ENTER.

MENU

[Setup ... Auto Installation]

Setup Option

Auto Installation

Programme Setup

Child Lock

Speaker Setup

Position

Rotate

Language

[Normal]

[English]

3

Press a/b to select “Programme Setup”, and then press ENTER.

If you have already set the password, enter it here.

• See page 56 for setting password.

MENU

[Setup ... Programme Setup]

Setup Option

Auto Installation

Programme Setup

Child Lock

Speaker Setup

Position

Rotate

Language

[Normal]

[English]

4

If you already set the password, enter it here.

• See page 56 for setting password.

– – – –

5

Press c/d to select “Yes”, and then press

ENTER.

6

Press a/b to select the desired language listed on the screen, and then press ENTER.

After this setting, programme auto search begins.

You do not need to do anything during the auto search.

NOTE

• After performing step 6, the menu screen shown in step 3 will reappear. Do not turn off the System before then, because the System is saving the data found.

4

Press a/b to select “Auto Search”, and then press ENTER.

5

Press c/d to select “Yes”, and then press

ENTER. After this setting, programme auto search begins.

NOTE

• After performing step 5, the menu screen shown in step 3 will reappear. Do not turn off the System before then, because the System is saving the data found.

23

LC-45G1H(E)-c 23 04.10.18, 6:42 AM

24

LC-45G1H(E)-c

Basic adjustment settings

Manual setting for each channel

You can set some channel items manually. They are

Search, Fine (TV frequency), Colour sys., Sound sys.,

Label (Network name), Skip, Lock (Child Lock) and

Booster.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Search tuning

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information displays.

2

Press a/b to select “Search”, and then press ENTER.

MENU [Setup ... Programme Setup ... Manual Adjust]

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

179.25

NEXT

STORE

CANCEL

MHz

3

Press a/b to select “Programme Setup”, and then press ENTER.

If you have already set the password, enter it here.

• See page 56 for setting password.

4

Press a/b to select “Manual Adjust”, and then press ENTER.

5

Press c/d to select “Yes”, and then press

ENTER.

Programme Setup “Manual Adjust” menu

01 SAT.1

02 PR07 03 KABEL

Next

You can select one of the following settings.

1

Search (See page 24.)

2

Fine (See page 24.)

3

Colour system (See page 25.)

4

Sound system (See page 25.)

5

Label (See page 25.)

6

Skip (See page 26.)

7

Lock (See page 26.)

8

Booster (See page 26.)

3

Press a/b to select item and press ENTER.

NEXT: Search the next channel.

STORE: Memorise the current display channel.

CANCEL: Returns to the previous screen. (The search result will not be stored.)

NOTE

• Search tuning cannot be used when L’ is selected in Sound system menu. (See page 25.)

Fine tuning

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information displays.

2

Press a/b to select “Fine”, and then press

ENTER.

3

Press c/d to adjust the frequency, and then press ENTER.

• Adjust while checking the background picture as a reference.

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

179.25

MHz

• Instead of the method above, you can also set by directly entering the frequency number of the channel with 09.

a

• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.

24 04.10.18, 6:42 AM

Basic adjustment settings

Manual setting for each channel (continued)

Colour system

1

2

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Colour sys.”, and then press ENTER.

• Receivable colour systems are listed.

Colour system menu

MENU

[Setup ... Programme Setup ... Manual Adjust]

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

AUTO

PAL

SECAM

NTSC 4.43

PAL-60

Labelling channels

When a TV channel sends its Network Name, the auto installation detects the information and assigns a name to it. However, you can change individual channel names.

1

2

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information displays.

Press a/b to select “Label”, and then press

ENTER.

• Alphabets and numbers are listed.

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

Labelling menu

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

A B C D E F G H I

K L M N O P Q R S

U V W X Y Z + – .

J CLEAR

T BACK

_

0 1 2 3 4 5 6 7 8 9 END

3

Press a/b to select the optimum colour system, and then press ENTER.

3

Press a/b/c/d to select each character of the new name for the channel, and then press ENTER.

Sound system (Broadcasting system)

4

Repeat until the name is fully spelt out.

• The name can be 5 characters or less.

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information displays.

2

Press a/b to select “Sound sys.”, and then press ENTER.

• Receivable sound systems (Broadcasting systems) are listed.

Sound system menu

Search

Fine

Colour sys.

Sound sys.

[179.25]

[AUTO]

[B/G]

B/G

D/K

I

Label

Skip

Lock

Booster

[SAT.1]

[Off]

[Off]

[Off]

L’

3

Press a/b to select the optimum sound system, and then press ENTER.

NOTE

• Check the colour system (see above) if the sound output is not correct.

25

LC-45G1H(E)-c 25 04.10.18, 6:42 AM

26

LC-45G1H(E)-c

Basic adjustment settings

Manual setting for each channel (continued)

Skipping channels

Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information will be displayed.

Setting the child lock

You can block the viewing of any channel.

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

• The selected channel information will be displayed.

2

3

Press a/b to select “Skip”, and then press

ENTER.

• Skip menu displays.

Skip menu

MENU [Setup ... Programme Setup ... Manual Adjust]

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

Off

On

Press a/b to set “Skip” to “On”, and then press ENTER.

2

Press a/b to select “Lock”, and then press

ENTER.

• Child lock menu will be displayed.

Lock menu

Search

Fine [179.25]

Off

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

On

3

NOTE

• See page 56 for setting password.

• When “Lock” is set to “On” for a channel, “Child lock has been activated.” is displayed , and the image and sound of the channel is blocked.

• When pressing ENTER while “Child lock has been activated.” is displayed, password input menu will be displayed. Inputting the correct password lifts the child lock temporarily until the power is turned off.

Setting the booster

Picture quality may improve in regions with weak signal strength using this function.

1

Press a/b/c/d to select the channel you want to edit, and then press ENTER.

2

Press a/b to set “Lock” to “On”, and then press ENTER.

Press a/b to select “Booster”, and then press ENTER.

• Booster menu displays.

Booster Menu

Search

Fine

Colour sys.

Sound sys.

Label

Skip

Lock

Booster

[179.25]

[AUTO]

[B/G]

[SAT.1]

[Off]

[Off]

[Off]

Off

On

3

Press a/b to set “Booster” to “On”, and then press ENTER.

NOTE

• If signal strength is strong enough for the selected channel, the effect is negligible and may produce instability. In such case, select “Off”.

26 04.10.18, 6:42 AM

LC-45G1H(E)-c

Basic adjustment settings

Sort

Channel positions can be sorted freely.

1

Press MENU and the MENU screen displays.

Erase Programme

The individual programme can be erased.

1

Repeat steps 1 to 3 in Sort.

2

3

4

5

6

7

8

Press c/d to select “Setup”.

Press a/b to select “Programme Setup”, and then press ENTER.

If you already set the password, enter it here.

• See page 56 for setting password.

Press a/b to select “Sort”, and then press

ENTER.

Press c/d to select “Yes”, and then press

ENTER.

Press a/b/c/d to select the channel you want to move, and then press ENTER.

Move it to the desired position by pressing a/b/c/d, and then press ENTER.

Repeat the steps 6 and 7 until all desired channels are sorted.

Sort menus

01 SAT.1

01 SAT.1

06

02 KABEL 03 04 05

2

3

4

5

6

Press a/b to select “Erase Programme”, and then press ENTER.

Press c/d to select “Yes”, and then press

ENTER.

Press a/b/c/d to select the channel you want to erase, and then press ENTER.

• A message screen pops up.

Press c/d to select “Yes”, and then press ENTER to erase the selected programme. All the subsequent programmes move up.

Repeat the steps 4 and 5 until all desired channels are erased.

Erase programme menus

01 SAT.1

01 SAT.1

06

11

16

02 Pro7

07

12

17

03 KABEL 04

08

13

18

09

14

19

Next

05

10

15

20

Next

01 SAT.1

02 KABEL

01 SAT.1

02 KABEL

02 Pro7

11

16

01 SAT.1

06

12

17

02 Pro7

07

13

18

03 KABEL

08

04

09

14

19

Next

05

10

15

20

01 KABEL

01 KABEL 02 SAT.1

Next

02 KABEL

01 SAT.1

06

11

16

02 KABEL 03

07

12

17

08

13

18

Next

04

09

14

19

05

10

15

20

Next

27

27 04.10.18, 6:43 AM

Basic adjustment settings

Language setting for on-screen display

You can also select a language from setup menu.

Select from among 2 languages: English and Chinese.

1

Press MENU and the MENU screen displays.

OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

Using OPC on the remote control unit

2

3

4

Press c/d to select “Setup”.

Press a/b to select “Language”, and then press ENTER.

Press a/b to select the desired language listed on the screen, and then press ENTER.

Press OPC to switch the Optical Picture Control on and off.

Using OPC on the menu screen

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Picture”.

3

Press a/b to select “OPC”.

4

Press c/d to select “On”.

NOTE

• When set to “On”, the System senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

Selected item

Off

On

Description

The brightness is fixed at the value set in

“Backlight” (see page 29).

Automatically adjusts

28

LC-45G1H(E)-d 28 04.10.18, 6:44 AM

Basic adjustment settings

Picture adjustments

You can adjust the picture to your preference.

Follow the steps to adjust the picture.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Picture”.

3

Press a/b to select a specific adjustment item.

4

Press c/d to adjust the item to your desired position.

NOTE

• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

Adjustments items for AV source

MENU

[Picture]

Picture Audio

USER [TV]

OPC

Backlight [+16] –16

Contrast

Brightness

[+30]

[0]

0

–30

Colour

Tint

Sharpness

Advanced

[0]

[0]

[0]

–30

–30

–10

Reset

Off On

+16

+40

+30

+30

+30

+10

Selected item

Backlight

cbutton

The screen dims

Contrast

For less contrast d

button

The screen brightens

For more contrast

Brightness

Colour

Tint

Sharpness

For less brightness For more brightness

For less colour intensity

Skin tones become purplish

For more colour intensity

Skin tones become greenish

For less sharpness For more sharpness

Adjustments items for PC source

MENU

[Picture]

Picture Audio

USER [PC]

OPC

Backlight [+16] –16

Contrast

Brightness

[+30]

[0]

0

–30

Red [0] –30

Green

Blue

Advanced

[0]

[0]

–30

–30

Reset

Off On

+16

+40

+30

+30

+30

+30

Selected item

Backlight

cbutton

The screen dims

Contrast

For less contrast d

button

The screen brightens

For more contrast

Brightness

For less brightness For more brightness

Red

For weaker red For stronger red

Green

For weaker green For stronger green

Blue

For weaker blue For stronger blue

NOTE

• Select “Advanced” and then press ENTER to set “C.M.S-

Hue”, “C.M.S-Saturation”, “C.M.S-Value”, “Colour Temp.”,

“Sharpness Enhancement”, “Automatic Contrast”, “I/P

Setting”, “Film Mode”, “3D-Y/C” or “Monochrome”. See pages 30 and 31.

NOTE

• Select “Advanced” and then press ENTER to set “C.M.S-

Hue”, “C.M.S-Saturation”, “C.M.S-Value” or “Sharpness

Enhancement”.

29

LC-45G1H(E)-d 29 04.10.18, 6:44 AM

30

LC-45G1H(E)-d

Basic adjustment settings

C.M.S. (Colour Management System)

Colour tone is managed using the six-colour adjustment setting.

1

2

3

4

Press MENU and the MENU screen displays.

Press c/d to select “Picture”.

Press a/b to select “Advanced”, and then press ENTER.

Press a/b to select “C.M.S.-Hue”, and then press ENTER.

Colour temperature

Adjusts the colour temperature to give the best white image.

1

Repeat steps 1 to 3 in C.M.S. (Colour

Management System).

2

Press a/b to select “Colour Temp”, and then press ENTER.

3

Press a/b to select the desired level, and then press ENTER.

Selected item

High

Mid-High

Mid

Mid-Low

Low

Description

White with bluish tone

White with reddish tone

5

Press a/b to select a specific adjustment item.

C. M. S-Hue

C. M. S-Saturation

C. M. S-Value

Changing reds closer to magenta or yellow.

R

Y

G

[ 0]

[ 0]

[ 0]

–30

–30

–30

C

B

[ 0]

[ 0]

–30

–30

M

Reset

[ 0] –30

+30

+30

+30

+30

+30

+30

Sharpness Enhancement

Provides sharper images with more depth by adjusting background sharpness.

1

Repeat steps 1 to 3 in C.M.S. (Colour

Management System).

2

Press a/b to select “Sharpness

Enhancement”, and then press ENTER.

• You can select “C.M.S-Saturation” or “C.M.S-

Value” here instead of selecting “C.M.S-Hue”.

6

Press c/d to adjust the item to your desired position.

NOTE

• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

Selected item

C.M.S-Hue

C.M.S-

Saturation

C.M.S-Value

Description

This is a standard to adjust the colour either more reddish or more bluish in tone.

Increases or decreases the saturation of a selected colour

A higher value makes the image brighter.

A lower value makes the image darker.

3

Press c/d to select the desired level, and then press ENTER.

• The higher the number of the level, the more sharpness and depth you will get in images.

Automatic Contrast

Adjusts black level and white level in images automatically as appropriate to a particular scene.

1

Repeat steps 1 to 3 in C.M.S. (Colour

Management System).

2

Press a/b to select “Automatic Contrast”, and then press ENTER.

3

Press c/d to select “On” or “Off”, and then press ENTER.

Selected item

On

Off

Description

Automatically adjusts

For normal images

30 04.10.18, 6:45 AM

Basic adjustment settings

I/P setting

Adjusting the image and input signal can give you a more beautiful picture.

1

Press MENU and the MENU screen displays.

3D-Y/C

Provides high quality images with minimal dot crawl and cross colour noise.

Using 3D-Y/C on the remote control unit

2

Press c/d to select “Picture”.

3

4

5

Press a/b to select “Advanced”, and then press ENTER.

Press a/b to select “I/P Setting”, and then press ENTER.

• Some items may be greyed out. They are not selectable.

Press c/d to select “Fast” or “Slow”, and then press ENTER.

Press 3D-Y/C to switch the 3D-Y/C function on and off.

NOTE

• “3D-Y/C” is set to “On” when the System is turned back on.

• 3D-Y/C may not operate depending on the input signal type or noisy input signal.

• 3D-Y/C is automatically set to “On” when you change channels or input sources.

1

Repeat steps 1 to 3 in I/P setting.

NOTE

• The I/P Setting is set to Slow when Film Mode is “On”.

2

Press a/b to select “3D-Y/C”, and then press ENTER.

Film mode

Automatically detects a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality.

1

Repeat steps 1 to 3 in I/P setting.

2

Press a/b to select “Film Mode”, and then press ENTER.

• Some items may be greyed out. They are not selectable.

3

Press a/b to select the desired level, and then press ENTER.

Selected item

Standard

Fast

Slow

Description

Normal adjustment

For movie image

For still image

NOTE

• “3D-Y/C” is not selectable depending on the input signal type.

3

Press c/d to select “On”, and then press

ENTER.

Monochrome

For viewing a video in monochrome.

1

Repeat steps 1 to 3 in I/P setting.

2

3

Press a/b to select “Monochrome”, and then press ENTER.

Press c/d to select “On”, and then press

ENTER.

31

LC-45G1H(E)-d' 31 04.10.18, 6:46 AM

Basic adjustment settings

Audio adjustment

You can adjust the sound quality to your preference with the following settings.

Dolby Virtual

When you set Dolby Virtual to On, you can enjoy virtual surround sound, the same as if you were in a movie theatre.

1

Press MENU and the MENU screen displays.

1

Press MENU and the MENU screen displays.

2

3

Press c/d to select “Audio”.

MENU

[Audio]

Audio Power Control

USER [TV]

Treble [0] –15

Bass

Balance

Dolby Virtual

Reset

[0]

[0]

–15

L

+15

+15

R

[Off]

Press a/b to select a specific adjustment item.

4

Press c/d to adjust the item to your desired position.

Selected item

cbutton d

button

2

Press c/d to select “Audio”.

3

Press a/b to select “Dolby Virtual”, and then press ENTER.

MENU [Audio ... Dolby Virtual]

Audio Power Control

USER [TV]

Treble [0] –15

Bass

Balance

[0]

[0]

–15

L

Dolby Virtual

Reset

+15

+15

R

[Off]

Treble

Bass

Balance

For weaker treble For stronger treble

For weaker bass For stronger bass

Decrease audio from the right speaker

Decrease audio from the left speaker

NOTE

• For resetting all adjustment items to factory preset values, press a/b to select “Reset”, press ENTER, press c/d to select “Yes”, and then press ENTER.

• Audio menu items are greyed out when Audio output is variable or when headphones are in use.

• Balance is greyed out when Dolby Virtual is set to “On”.

4

Press c/d to select “On”, and then press

ENTER.

NOTE

• Audio menu items are greyed out when Audio output is variable or when headphones are in use.

• External Audio Bypass is greyed out when Dolby Virtual is set to “On”.

• Balance is greyed out when Dolby Virtual is set to “On”.

• For some discs, setup may be required on your DVD. In this case, please refer to the operation manual of your

DVD player.

• You may not get the Dolby Virtual Surround effect if you adjust “Treble” or “Bass” setting.

32

LC-45G1H(E)-e 32 04.10.18, 6:50 AM

Basic adjustment settings

Power control

Power control setting allows you to save energy.

Power control for AV source

No Signal off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

Power control for PC source

Power management

When set, the power will automatically shut down if no signal is input for a certain time.

1

Press MENU and the MENU screen displays.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Power control”.

• Power control menu displays.

2

Press c/d to select “Power control”.

• Power control menu displays.

3

Press a/b to select “No Signal Off”, and then press ENTER.

3

Press a/b to select “Power Management”, and then press ENTER.

4

Press a/b to select “Mode1” or “Mode2”, and then press ENTER.

4

Press c/d to select “Enable”, and then press ENTER

• Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

• When a TV programme finishes, and the AVC System receives signal input, this function may not operate.

Off

Mode1

Mode2

No Operation off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1

2

3

Press MENU and the MENU screen displays.

Press c/d to select “Power control”.

• Power control menu displays.

Press a/b to select “No Operation Off”, and then press ENTER.

Selected item

Off

Mode1

Mode2

Description

• No power management

• Factory preset value.

• If no signal inputs for 8 minutes, the power shuts down.

• Even if you start using the PC and the signal inputs again, the System stays off.

• The System turns on again by pressing

POWER. (See page 17.)

• If no signal inputs for 8 seconds, the power shuts down.

• When you start using the PC and the signal inputs again, the System turns on.

• The System turns on again by pressing

POWER. (See page 17.)

4

Press c/d to select “Enable”, and then press ENTER.

• Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

NOTE

• If you turn off the power by disconnecting AC cord when setting “Mode2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.

• Pressing POWER on the display will have the same result.

• When selecting “PC digital” in Input Select and setting

“Mode 2” in power management, depending on the model of the computer, the power may not turn back on automatically even if the signal inputs again.

33

LC-45G1H(E)-e 33 04.10.18, 6:50 AM

34

LC-45G1H(E)-f

Using memory card

Important notes on using memory cards

• Sharp cannot be held responsible for misuse of the LCD TV set, any troubles during use, or other problems, or any damages arising out of the use of the LCD TV set, except for those cases for which Sharp is liable by law.

• If you or other people misuse the LCD TV set, or the LCD TV set is affected by static electricity or electrical noise, the recorded data may be in danger of being changed or lost.

• If you are making an important recording, run a test in advance to ensure that the recording would be performed correctly in terms of picture or sound quality.

• Sharp cannot be held responsible nor make any compensations even if pictures or sound cannot be recorded correctly because of any troubles when using the LCD TV set.

Copyright

Note:

Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright.

Please refer to relevant law in your country.

Duplicating images and music by copying and/or editing from videocassettes and/or TV programmes that are subject to copyrights is only permitted when the edited or copied versions are used for personal pleasure. With the exception of cases when the user personally is the owner of the copyrights of the object in question or when specific and written permission has been obtained from the owner(s) of the object in question, the user is not permitted to make copies and/or duplications and/or edited versions as this constitutes a violation of the copyright laws, possible exposing the user to demands for compensation for damages. Therefore, be sure to strictly observe the existing copyright laws.

In addition when using image data that includes third parties, since the use of such images without prior permission may constitute an intrusion on the privacy of third parties, be sure to refrain from such usage.

The recording formats

Still picture

Motion picture

Recording/Playback file format

Size of a captured still picture

Recording file format

Size of a recorded motion picture/number of frames

Playback file format

JPEG (DCF compliant)

640g480 dots

SP/LP... ASF (Motion Picture: MPEG-4 compliant, Sound: WMA-compliant)

EP........ ASF (Motion Picture: MPEG-4 compliant, Sound: G.726-compliant)

SP ... Size: 320g240 dots, Frame: approx. 25 frames/sec (50 Hz)

LP ... Size: 320g240 dots, Frame: approx. 25 frames/sec (50 Hz)

EP ... Size: 320g240 dots, Frame: approx. 12.5 frames/sec (50 Hz)

ASF (Motion Picture: MPEG-4 compliant, Sound: WMA-compliant)

ASF (Motion Picture: MPEG-4 compliant, Sound: G.726-compliant)

* Motion picture files and still image files recorded, stored or edited with other devices may not play back correctly.

Approximate number of recordable pictures/time

Still pictures

Recordable Pictures

Picture size

640g480

Memory card capacity

32MB

128MB

Approx. 300 pictures Approx. 1000 pictures

* Recordable numbers may vary depending on the receiving condition of the LCD TV set and/or content of images.

Motion pictures

Recordable time

Picture size

320g240

320g240

320g240

Recording mode

SP

LP

EP

Memory card capacity

256MB

5GB

Approx. 10 min.

Approx. 30 min.

Approx. 1h

Approx. 4h

Approx. 10h

Approx. 25h

• Recordable time may vary depending on receiving condition of the LCD TV set or content of images.

• The maximum amount of data you can record on a memory card is 1,000 pictures in total including still and motion pictures.

• Files in excess of 4GB and files exceeding 12 hours of recording time cannot be recorded and/or played back.

34 04.10.18, 6:58 AM

Using memory card

You can use memory cards (commercially available) for recording and playing back pictures.

• Please use an appropriate PC card adapter

(commercially available) for each memory card.

• Following memory cards are available. (Note that names for memory cards vary depending on manufacturers.)

Memory card name

SD Memory Card mini SD™ Card

CompactFlash

MultiMediaCard

SmartMedia

Memory Stick

Memory Stick PRO

Microdrive xD Picture Card

PC Card Hard Disk

Storage capacity

512 MB or less

32 MB or less

2 GB or less

128 MB or less

128 MB or less

128 MB or less

1 GB or less

2 GB or less

128 MB or less

5 GB or less

Commercially available memory cards

SD Memory

Card mini SD™ Card

MultiMediaCard

PC card adapter

SmartMedia

CompactFlash

Memory Stick

Memory Stick

PRO

PC Card

Hard Disk xD Picture Card

Microdrive

• Please use an appropriate PC card adapter

(commercially available) for each memory card.

* Each memory card name is a trademark.

* The capacity of memory card is approximate. The capacity varies depending on the manufacturer.

• To read picture files recorded with digital cameras, use the PC card adapter recommended by the corresponding manufacturer. (The names for PC card adapters vary depending on manufacturers.)

• For directions for use of digital cameras or PC card adapters, please refer to the operation manual provided for each product.

• Depending on the card or adapter used, normal operation may not be possible.

You can playback DCF compliant JPEG pictures captured with other devices in the card playback mode.

• DCF (Design rule for Camera File system) is a standard of the Japan Electronics and Information

Technology Industries Association (JEITA). This standard specifies the image file format used for images shot with a digital camera.

• Some motion pictures recorded with other devices may not be played back correctly.

Preparing a memory card

Insert a memory card (commercially available) into a PC card adapter (commercially available).

Example:

Inserting the SD memory card into a PC card adapter.

Notes on using memory cards and PC card adapter

Please note the following when using memory cards and PC card adapters to avoid corruption of data or malfunction of the LCD TV set.

• If you use memory cards other than those shown above, recording or playing back pictures are not guaranteed.

• Some PC card adapters have restrictions of memory card capacity. Refer to the relevant operation manual for such restrictions.

• Some pictures which have been created, modified, or copied on your PC may not be played back.

• Please be sure to turn off the LCD TV set when you insert or remove a PC card adapter.

• Do not bend, drop or apply a shock to memory cards or PC card adapters.

• Keep memory cards or PC card adapters away from heat, water or direct sunlight.

• Do not dismantle or modify memory cards or PC card adapters.

• Refer to the appropriate operation manuals for details on using or keeping memory cards or PC card adapters.

• Do not turn the LCD TV set off while a memory card is in operation (e.g. playing back, recording or displaying a slideshow).

• The recorded data may be erased or changed due to incorrect operation, the influence of static electricity and electrical noise, therefore be sure to back-up the data regularly.

• Be sure to back-up important files using other media such as a PC.

35

LC-45G1H(E)-f 35 04.10.18, 6:59 AM

36

LC-45G1H(E)-f

Using memory card

Card Setup mode menu items

Press the CARD button first to access following items.

Still Setup Slide Show Setup Interval

Card

CARD - STILL

My Programme

Audio Select

Edit

Video Setup

Rec. Mode

Pre-recording

Repeat

Edit

Format

Yes/No

Slide show operation panel

1 2

0001/0045

ORDER:NORMAL REPEAT:OFF

SLIDE SHOW

PREV.

NEXT

Order

Repeat

Setup/Erase

Off/TV/INPUT1-INPUT5

Protect/Delete File/ Delete All

SP/LP/EP

On/Off

Off/File/All

Protect/Delete File/Delete All

1-10/15/20/25/30/

45/60 s.

15/30/60 Min.

Normal/Random/

My Programme

On/Off

1

Motion picture operation panel

2 3 4

0001/0045

REPEAT:OFF

CARD - VIDEO

5

PLAY

MODE : SP

0 0 : 1 5 : 2 5

PLAY

1

Rotate the image

2

Pause

3

Go to previous image

4

Start slide show

5

Stop slide show

6

Go to next image

3 4 5 6

6

1

Action

7 8

2

Go back to the beginning of the file

3

Pause

4

Repeat playback setting

5

Go to the beginning of the next file

6

Recording mode

7

Counter

9 10 11 12 13

8

Current action

9

Reverse

10

Playback

11

Stop

12

Fast forward

13

Slow playback

Precautions when playing back PC image data on the LCD TV

Recording formats of image data:

When recording image data on the LCD TV, the recording formats are as follows.

• When recording motion pictures: The SD_VIDEO folder is created and the data is stored in. When playing the card, the SD_VIDEO recording format is recognised.

• When recording still pictures: The DCIM folder is created and the data is stored in. When playing the card, the

DCIM recording format is recognised.

When playing the card, record PC data in a recording format the LCD TV can recognise.

1. When copying motion pictures from a PC to a card recorded with the LCD TV, only play these pictures after placing them in the SD_VIDEO folder.

2. When copying still pictures from a PC to a card recorded with the LCD TV, only play these pictures after placing them in the DCIM folder.

3. When using a new card for copying motion pictures, first format the card and create an SD_VIDEO folder before placing the data in the folder for playback.

4. When using a new card for copying still pictures, first format the card and create a DCIM folder before placing the data in the folder for playback.

When creating, revising, or copying images using your PC, the edited images may not playback correctly.

36 04.10.18, 6:59 AM

Using memory card

Inserting a PC card adapter

• Press in the EJECT button if it is popped out.

• Insert a memory card to a PC card adapter beforehand. (See page 35.)

• Insert the PC adapter card slowly.

CARD indicator

Recording a still image

You can record a still image on the card.

1

Press FREEZE.

LC-45G1H(E)-f

PC CARD slot

• CARD indicator lights up green when the card is inserted.

NOTE

• When “Card is not inserted” is displayed, eject the PC card adapter, and then insert the PC card adapter slowly all the way to the end.

• When over a thousand files are in a card, it takes several minutes to load. (approx. 5 minutes.)

• Even if the green light is on, you can not record on a card right after you inserted it.

• Make sure the CARD indicator lights green when you take out a card. Never take out a card when the CARD indicator lights red. This may damage the card.

Ejecting the card

• Make sure the card indicator lights up green.

1

Press EJECT button.

• EJECT button is popped up.

EJECT button

Cooking Time

Onion

Tomato

Potato x 1 x 1 x 1

Still

Onion

Tomato

Potato x 1 x 1 x 1

2

Press E REC.

Cooking Time

Still

Tomato

Potato x 1 x 1 x 1

• “Still image was captured on a card.” displays.

• Recording may fail depending on the input signal type or card memory status.

3

Press ENTER to update the still image.

Still

Cooking Time

2

Press EJECT button again.

• PC card adapter itself pops up.

3

Take out the PC card adapter.

NOTE

Broadcasting types or input signals not available for recording:

1 COMPONENT input

2 Copy guarded signal

3 DVI-I input

Selecting Still mode

1

Press CARD and the card mode screen displays.

2

Press c/d to select “Still”, and then press

ENTER.

• When in CARD mode, press 0-9 or TV/VIDEO to switch either TV or AV input mode.

37

04.10.18, 6:59 AM 37

Using memory card

Displaying a still image

1

Press CARD and the card mode screen displays.

2

Press c/d to select “Still” and then press

ENTER.

3

Press a/b/c/d to select a file you want to display, and then press ENTER.

Still Video

File 1 File 2 File 3

Setting Slide Show

You can adjust the interval, order and repeat settings.

1

2

Press CARD and the card mode screen displays.

Press MENU and the MENU screen displays.

3

Press c/d to select “Card”.

File 4

File 7

File 5

File 8

File 6

File 9

• To display the files that are in the previous or next page, select c/d on the index screen and press ENTER.

• When viewing a still image, by pressing WIDE the image size changes. Normal – Full.

This function does not work when displaying the index screen.

4

Press a/b to select “Still Setup”, and then press ENTER.

5

Press a/b to select “Slide Show Setup” and then press ENTER.

Slide Show Setup

My Programme

Audio Select

Edit

Interval

Order

Repeat On

5 Sec.

Normal

Off

Displaying slide show

1

Repeat steps 1 to 3 in Displaying a still

image.

• The operation panel displays.

CARD - STILL

0001/0045 ORDER:NORMAL REPEAT:OFF

SLIDE SHOW STOP

PREV.

NEXT

6

Press a/b/c/d to select the desired slide show setting, and then press ENTER.

Selected item

Interval

Order

Repeat

Description

Set the frame interval for a slideshow.

Set the frame order for a slideshow. See

My Programme for details.

If set to “On”, the slideshow will play again after showing the last frame.

2

Press a/b/c/d to select d, and then press

ENTER.

• Slide show starts.

• Operate slide show with the operation panel appears on the screen.

• To turn off the operation panel, press CARD on the remote control.

• Press F to pause the slideshow, and press H to return to the index screen.

NOTE

• See page 36 for operation panel function.

• You cannot rotate the image during slide show. Stop slide show to rotate the image.

38

LC-45G1H(E)-f 38 04.10.18, 6:59 AM

LC-45G1H(E)-f

Using memory card

My Programme

You can select up to thirty-two pictures and specify the order for displaying in slide show.

1

Press CARD and the card mode screen displays.

2

Press MENU and the MENU screen displays.

Audio Select

You can enjoy the audio from TV or other external equipment during the still image playback.

1

2

Repeat steps 1 to 4 in My Programme.

3

Press c/d to select “Card”.

Press a/b to select “Audio Select”, and then press ENTER.

Slide Show Setup

My Programme

Audio Select

Edit

Off

Input1

Input3

Input5

TV

Input2

Input4

4

Press a/b to select “Still Setup”, and then press ENTER

5

Press a/b to select “My Programme”, and then press ENTER.

Slide Show Setup

My Programme

Audio Select

Edit

Setup Erase

3

Press a/b/c/d to select the desired sound output, and then press ENTER.

Protecting/unprotecting still image files

You can protect any file you do not want to delete.

1

Repeat steps 1 to 4 in My Programme.

6

Press c/d to select “Setup”, and then press

ENTER.

7

Press a/b/c/d to select the files, and then press ENTER.

8

Repeat the operation in step 7. (You can select up to 32 files.)

9

After selecting all the files you want, press

RETURN to return to MENU.

To cancel My Programme setting

1

Select “Erase” at step 6 in My Programme and then press ENTER.

2

Press c/d to select “Yes”, and then press

ENTER.

• All the registered numbers are cleared.

2

3

Press a/b to select “Edit”, and then press

ENTER.

Slide Show Setup

My Programme

Audio Select

Edit

Protect

Delete File

Delete All

Press a/b to select “Protect”, and then press ENTER.

• The list of still image files displays.

File 1

File 4

File 7

File 2

File 5

File 8

File 3

File 6

File 9

4

Press a/b/c/d to select the file you want to protect, and then press ENTER.

• Protect mark ( ) displays.

• Select the file with a protect mark and press

ENTER to unprotect it.

NOTE

• You cannot delete a protected file on the card.

39

39 04.10.18, 6:59 AM

Using memory card

Deleting a still image file

1

2

3

4

Repeat steps 1 to 4 in My Programme.

Press a/b to select “Edit”, and then press

ENTER.

Press a/b to select “Delete File”, and then press ENTER.

Recording a motion picture

Use this setting to record images you are currently watching.

Record with the settings made in “Rec. Mode” and

“Pre-recording”.

1

Press E REC to start recording.

• CARD indicator lights up red.

• Recording information displays in the lower right corner of the screen.

2

Press E REC to stop recording.

Press a/b/c/d to select the file you want to delete, and then press ENTER.

Still Video

File 1 File 2 File 3

File 4 File 5 File 6

NOTE

Broadcasting types or input signals not available for recording:

1 COMPONENT input

2 Copy guarded signal

3 DVI-I input

File 7 File 8 File 9

5

Press c/d to select “Yes”, and then press

ENTER.

6

Repeat the operations in steps 4 and 5 above.

7

After deleting the images you no longer need, press RETURN to return to MENU.

NOTE

• You cannot delete a protected file on the card.

• Do not turn off the power or take out a card when deleting a file. The card may malfunction.

To display the remaining record time.

Press DISPLAY while not recording.

• Remaining record time displays in the lower right corner of the screen.

NOTE

• Do not press POWER on the Display while recording.

Recording cannot finish properly and may damage the file.

• Recording stops if you press POWER on the remote control while recording.

• When card has no capacity for recording, “Card is full” displays and stops recording.

• You cannot change the channel or switch the input source while recording.

Selecting Video mode

Deleting all still image files

1

Select “Delete All” instead of “Delete File” in step 6 in Deleting a still image file.

Slide Show Setup

My Programme

Audio Select

Edit

Protect

Delete File

Delete All

1

Press CARD and the card mode screen displays.

2

Press c/d to select “Video”, and then press

ENTER.

• When in CARD mode, press 0-9 or TV/VIDEO to switch either TV or AV input mode.

40

LC-45G1H(E)-f

2

Press c/d to select “Yes”, and then press

ENTER.

NOTE

• You cannot delete a protected file on the card.

• Do not turn off the power or take out a card when deleting a file. The card may malfunction.

40 04.10.18, 6:59 AM

Using memory card

Displaying a motion picture

1

Press CARD and the card mode screen displays.

2

Press c/d to select “Video”, and then press

ENTER.

3

Press a/b/c/d to select the file you want to play, and then press ENTER.

• Video playback starts.

CARD - VIDEO

0001/0045 REPEAT:OFF

PLAY

MODE : SP

0 0 : 1 5 : 2 5

PLAY

Pre-recording

You can record the picture slightly before the point where you pressed the record button, enabling you to record just the scene you wanted.

1

Repeat steps 1 to 4 in Rec. Mode.

2

Press a/b to select “Pre-recording”, and then press ENTER.

Rec. Mode

Pre-recording

Repeat

Edit

On Off

4

Press CARD again to display the operation panel.

• See page 36 for the operation panel information.

• When viewing a motion picture, by pressing

WIDE the picture size changes.

Small – Medium – Large.

Rec. Mode

Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture.

3

Press c/d to select “On”, and then press

ENTER.

Repeat

You can specify one file or all files to replay repeatedly.

1

Repeat steps 1 to 4 in Rec. Mode.

1

Press CARD and the card mode screen displays.

2

2

3

Press MENU and the MENU screen displays.

Press c/d to select “Card”.

Press a/b to select “Repeat”, and then press ENTER.

Rec. Mode

Pre-recording

Repeat

Edit

Off

File

All

4

Press a/b to select “Video Setup” and then press ENTER.

5

Press a/b to select “Rec. Mode”, and then press ENTER

Rec. Mode

Pre-recording

Repeat

Edit

SP

LP

EP

3

Press a/b to select desired setting, and then press ENTER.

Selected item

Off

File

All

Description

No playback or repeat.

Plays back and repeats one file.

Plays back all movie files on the card then repeats.

6

Press a/b to select the desired mode, and then press ENTER.

41

LC-45G1H(E)-f 41 04.10.18, 7:00 AM

42

LC-45G1H(E)-f

Using memory card

Protecting/unprotecting motion picture files

You can protect any file you do not want to delete.

1

2

Press CARD and the card mode screen displays.

Press MENU and the MENU screen displays.

3

Press c/d to select “Card”.

Deleting all motion picture files

1

2

Repeat steps 1 to 5 in Protecting/

unprotecting motion picture files.

Press a/b to select “Delete All”, and then press ENTER.

Rec. Mode

Pre-recording

Repeat

Edit

Protect

Delete File

Delete All

4

Press a/b to select “Video Setup” and then press ENTER.

5

Press a/b to select “Edit”, and then press

ENTER.

6

7

Press a/b to select “Protect”, and then press ENTER.

Press a/b/c/d to select the file you want to protect, and then press ENTER.

• Protect mark ( ) displays.

• Select the file with a protect mark and press

ENTER to unprotect it.

3

Press c/d to select “Yes”, and then press

ENTER.

NOTE

• You cannot delete a protected file on the card.

• Do not turn off the power or take out a card when deleting a file. The card may malfunction.

Format

8

Repeat the operation in step 7.

1

Press CARD and the card mode screen displays.

9

After setting the files you want to protect, press RETURN to return to MENU.

2

Press MENU and the MENU screen displays.

Deleting a motion picture file

3

Press c/d to select “Card”.

1

2

Repeat steps 1 to 5 in Protecting/

unprotecting motion picture files.

Press a/b to select “Delete File”, and then press ENTER.

3

4

Press a/b/c/d to select the file you want to delete, and then press ENTER.

Press c/d to select “Yes”, and then press

ENTER.

5

Repeat the operations in steps 3 and 4 above.

6

After deleting the images you no longer need, press RETURN to return to MENU.

NOTE

• You cannot delete a protected file on the card.

• Do not turn off the power or take out a card when deleting a file. The card may malfunction.

4

Press a/b to select “Format” and then press ENTER.

5

Press c/d to select “Yes”, and then press

ENTER.

NOTE

• Formatting a card deletes all files including the ones which set to protect.

42 04.10.18, 7:00 AM

Using external equipment

You can connect many types of external equipment to your System, like an HDTV tuner, VCR, DVD player, PC, game console and camcorder. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the Display.

Displaying a DVD image (Example) Displaying an external equipment image

Explanation here is for the setting when connecting

DVD to INPUT3 terminal.

CAUTION

• To protect all equipment, always turn off the AVC System before connecting to an HDTV tuner, VCR, DVD player,

PC, game console, camcorder or other external equipment.

NOTE

• See pages 44 to 46 for external equipment connection.

• Please refer to the relevant operation manual (DVD player,

PC, etc.) carefully before making connections.

• Each time TV/VIDEO is pressed, the input source toggles.

• If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

• Refer to your external equipment operation manual for the signal type.

1

2

To watch a DVD image, select “INPUT3” from

“INPUT SOURCE” menu using TV/VIDEO on the remote control unit or TV/VIDEO on the

Display.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

CARD

Select the desired signal type on “Input

Select” in the “Option” menu. (See page 49.)

For INPUT3 signal

MENU [Option ... Input Select]

COMPONENT

Y/C

CVBS

RGB

The setting is stored and can be selected on the

“INPUT SOURCE” menu.

LC-45G1H(E)-g 43 04.10.18, 7:02 AM

43

Using external equipment

The system can be connected to a SCART terminal on the external equipment with SCART cable. Please refer to the operation manual of the external equipment for details.

When connecting a game console using composite cable

You can use the INPUT 1, 2 or 3 terminal when connecting a game console and other audiovisual equipment.

AVC System (rear view)

To watch an image from this input terminal, you may need to select the input signal type (see page 49).

RCA/SCART conversion connector

Composite cable (commercially available)

Game console

When connecting a VCR using S-video cable

You can use the INPUT 2 or INPUT 3 terminal when connecting a VCR and other audiovisual equipment.

AVC System (rear view)

To watch an image from this input terminal, you may need to select the input signal type (see page 49).

RCA/SCART conversion connector

Audio cable (commercially available)

Video cable (commercially available) or

S-video cable (commercially available)

44

NOTE

• Please use either video cable or S-video cable alone to connect to the terminal.

Do not connect them together.

LC-45G1H(E)-g 44 04.10.18, 7:02 AM

VCR

Using external equipment

When connecting a DVD player or an HDTV tuner using component cable

You can use the INPUT 3 terminal when connecting a DVD player or an HDTV tuner and other audiovisual equipment.

To watch an image from this input terminal, you may need to select the input signal type (see page 49).

AVC System (rear view)

Component cable (commercially available)

RCA/SCART conversion connector

Audio cable

(commercially available)

DVD player/HDTV tuner

Connecting a game console or camcorder

A game console, camcorder and some other audiovisual equipment are conveniently connected using the

INPUT 4 terminals.

NOTE

• The S-video terminal has priority over the video terminals.

• You can also connect the game console to INPUT 1, 2 or 3 terminals to enjoy clearer picture.

AVC System (front view)

To watch an image from this input terminal, you need to select input signal type (see page 49).

Audio cable (commercially available)

Video cable (commercially available)

S-video cable (commercially available)

Game console/Camcorder

45

LC-45G1H(E)-g 45 04.10.18, 7:02 AM

Using external equipment

Connecting a PC

Use the INPUT5 terminals to connect a PC.

NOTE

• The PC input terminals are DDC1/2B-compatible.

• Refer to page 60 for a list of PC signals compatible with the System.

AVC System (rear view)

To watch the image from this input terminal, you need to select input signal type (see page 49).

DVI cable

(commercially available)

ø 3.5 mm stereo minijack cable

(commercially available)

PC

To watch the image from this input terminal, you need to select input signal type (see page 49).

RGB/DVI conversion cable

(commercially available)

ø 3.5 mm stereo minijack cable

(commercially available)

PC

NOTE

• Macintosh adaptor may be required for use for some Macintosh computers.

• When connecting to a PC, the correct input signal type is automatically detected. (See page 54.) If the PC image does not come in clearly, you may need to set the Auto Sync.

adjustment in the “Setup” menu. (See page 48.)

46

LC-45G1H(E)-g 46 04.10.18, 7:02 AM

LC-45G1H(E)-g

Using external equipment

Speaker Setup

Connecting external speakers

Rear view

Selecting speakers

You can output audio using the supplied speakers or other external speakers.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

3

4

5

Press a/b to select “Speaker Setup”, and then press ENTER.

Press a/b to select “Speaker”, and then press ENTER.

Press c/d to select “SPEAKER-A” or

“SPEAKER-B”, and then press ENTER.

Selected item

SPEAKER-A

SPEAKER-B

Description

Speaker connected to the Display.

Speaker connected to the AVC System.

How to connect the speaker cable

Push down the tab.

Insert the end of the cable.

3

Lift the tab back up.

When using external speakers

• Change the speaker setting to “SPEAKER-B”.

Make sure to connect the speaker terminal and cable polarity (L, +) properly

• The speaker terminal has plus (L) and minus (+) polarity.

• Plus is red and minus is black.

• The cables are also divided into plus and minus.

• When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.

NOTE

• Unplug the AC cord from the AC outlet before installing the speakers.

CAUTION

• Make sure external speakers have 4 ohm and 10 watt specifications.

• Connect the plus/minus terminals with the correct cables.

Incorrect connection may cause a short.

External Audio Bypass

External Audio Bypass automatically optimises the audio quality to suit internal (supplied) speakers.

1

Repeat steps 1 to 3 in Selecting speakers above.

2

Press a/b to select “External Audio

Bypass”, and then press ENTER.

3

Selected item

No

Yes

Press c/d to select “Yes” or “No”, and then press ENTER.

Description

Sets the optimum audio for the internal

(supplied) speakers.

When you are using your own speakers, output the original sound.

NOTE

• External Audio Bypass is greyed out when Dolby Virtual is set to “On”.

• When using external speakers (SPEAKER-B), make sure to set “External Audio Bypass” to “Yes”.

• When Dolby Virtual is on, External Audio Bypass automatically sets to “Yes”.

47

47 04.10.18, 7:03 AM

48

LC-45G1H(E)-h

Useful adjustment settings

Image position (for TV/AV input mode)

For adjusting a picture’s horizontal and vertical position.

1

Press MENU and the MENU screen displays.

Audio Only

When listening to music from a music programme, you can set the display off and enjoy audio only.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

2

Press c/d to select “Option”.

3

Press a/b to select “Position”, and then press ENTER.

4

Press a/b to select “H-Pos.” or “V-Pos.”.

H-Pos.

V-Pos.

Reset

[0]

[0]

–10

–20

+10

+20

3

Press a/b to select “Audio Only”, and then press ENTER.

4

Press c/d to select “On”, and then press

ENTER.

Selected item Description

Audio is output without screen image.

On

Off

Both screen images and audio are output.

5

Press c/d to adjust the item to your desired position.

NOTE

• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

Adjustments are stored separately according to input

source.

• This function is available for AV input mode and TV tuner mode.

Selected item Description

H-Pos.

V-Pos.

Centres the image by moving it to the left or right.

Centres the image by moving it up or down.

Auto Sync. adjustment (PC input mode only)

For automatically adjusting the PC image.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

• Setup menu displays.

3

Press a/b to select “Auto Sync.”, and then press ENTER.

4

Press c/d to select “Yes”, and then press

ENTER.

• Auto Sync. starts and “Adjusting the image” displays.

30%

NOTE

• When Auto Sync. is successful, “Auto Sync completed successfully” displays. If not, Auto Sync. failed.

• Auto Sync. may fail even if “Auto Sync completed successfully” displays.

• Auto Sync. is likely to succeed when an input PC image has wide vertical stripes (ex. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

• Be sure to connect the PC to the AVC System and switch it on before starting Auto Sync.

48 04.10.18, 7:05 AM

LC-45G1H(E)-h

Useful adjustment settings

Fine Sync. adjustment (PC input mode only)

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.

In some cases, however, manual adjustment is needed to optimise the image.

1

Press MENU and the MENU screen displays.

Input Select

Selecting input source

Can use for selecting the input source.

2

Press c/d to select “Setup”.

3

Press a/b to select “Fine Sync.”, and then press ENTER.

4

Press a/b to select the specific adjustment item.

H-Pos.

V-Pos.

Clock

Phase

Reset

[90]

[39]

[90]

[20]

+

+

+

+

1

Press TV/VIDEO on the remote control unit or TV/VIDEO on the Display.

2

Press TV/VIDEO on the remote control unit or TV/VIDEO on the Display to select the input source.

• An image from the selected source automatically displays.

• You can also select the input source by pressing a/b.

Selecting input signal type

For setting the signal type of external equipment.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Option”.

5

Press c/d to adjust the item to your desired position.

NOTE

• For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

Selected item Description

H-Pos.

V-Pos.

Clock

Phase

Centres the image by moving it to the left or right.

Centres the image by moving it to the up or down.

Adjusts when the image flickers with vertical stripes.

Adjusts when characters have low contrast or when the image flickers.

3

4

Press a/b to select “Input Select”, and then press ENTER.

Press a/b/c/d to select a signal type you want to set, and then press ENTER.

• If the selected signal type is incorrect, an image does not display or no colour image displays.

Input type

INPUT 1

INPUT 2

INPUT 3

INPUT 4

INPUT 5

Selectable item

CVBS, RGB*

Y/C, CVBS

COMPONENT, Y/C, CVBS, RGB*

AUTO, S-Video, Video

PC digital, PC analogue,

AV digital, AV analogue

NOTE

• If no (colour) image displays, try to change the other signal type.

• Check the operation manual of the external equipment for the signal type.

• Use 21 Pin Euro SCART cable if you wish to input RGB signal.

* RGB signal is displayed in INPUT 1 and INPUT 3 but is not applicable when using RCA/21 Pin-Euro SCART conversion connector.

49

49 04.10.18, 7:05 AM

50

LC-45G1H(E)-h

Useful adjustment settings

Input Label

You can assign each input source a label you like.

Colour system setting (for TV/AV input mode)

Yo u can change the colour system to one that is compatible with the image on the screen.

1

Press MENU and the MENU screen displays.

1

Press TV/VIDEO to select the input source whose label you would like to change.

2

Press c/d to select “Option”.

2

Press MENU and the MENU screen displays.

3

Press a/b to select “Colour System”, and then press ENTER.

3

4

5

6

Press c/d to select “Setup”.

4

Press a/b to select a compatible video signal system of your equipment, and then press ENTER.

• Some items may be greyed out. They are not selectable.

Press a/b to select “Input Label”, and then press ENTER.

Press a/b/c/d to select each character of the new name for the channel, and then press ENTER.

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

DVD

A

K

B

L

C

M

D

N

E

O

F

P

G

Q

H

R

I

S

U V W X Y Z + – .

0 1 2 3 4 5 6 7 8 9

J

T

_

CLEAR

BACK

END

(Example)

Repeat the above until the name is fully spelt out, and then press ENTER.

• The name can be 6 characters or less.

INPUT SOURCE

TV

INPUT1

INPUT2

DVD

INPUT4

NOTE

• Factory preset value is “AUTO”.

• If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

• This function is available for AV input mode and TV tuner mode.

• NTSC 3.58 is not available for TV mode.

CARD

(Example)

NOTE

• You cannot change labels if the INPUT SOURCE is TV or

CARD.

50 04.10.18, 7:05 AM

Useful adjustment settings

AV mode selection

AV mode gives you five viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.

LC-45G1H(E)-h

1

Press AV MODE.

• Present AV mode displays.

2

Press AV MODE again before the mode displayed on the screen disappears.

• The mode changes as shown below.

AV input mode

AV MODE: STANDARD AV MODE: MOVIE

AV MODE: DYNAMIC AV MODE: GAME

AV MODE: STANDARD

AV MODE: USER

PC input mode

AV MODE: USER

Selected item

Description

STANDARD

MOVIE

GAME

USER

DYNAMIC

For a highly defined image in a normally bright room

For a movie

Lowers image brightness for easier viewing.

Allows the user to customise settings as desired. You can set the mode for each input source.

For a clear-cut image emphasising high contrast for sports viewing

NOTE

• You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and

DYNAMIC for VIDEO input.)

51 04.10.18, 7:05 AM

51

Useful adjustment settings

WIDE mode (for TV/AV input mode)

Manual Selection

1

Press WIDE.

• The WIDE MODE menu displays.

• The menu lists the wide mode options selectable for the type of video signal currently received.

2

Press WIDE or a/b while the WIDE MODE menu displays on the screen.

• As you toggle down the options, each is immediately reflected on the Display. No need to press ENTER.

WIDE MODE

Normal

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

Selected item

Normal

Zoom 14:9

Panorama

Full

Cinema 16:9

Cinema 14:9

Dot by Dot

Description

For 4:3 “standard” pictures. A side bar appears on each side.

For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes.

In this mode the picture is progressively stretched toward each side of the screen.

For 16:9 squeeze pictures.

For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Displays an image with the same number of pixels on the screen (only when receiving 1080i signal).

Normal Zoom 14:9 Panorama

NOTE

• In the case where the signal received is 1080i (when receiving HDTV broadcasts from an external source), mode selections will not alternate as shown and some modes may not be displayed.

Cinema 14:9 Cinema 16:9 Full

52

LC-45G1H(E)-i 52 04.10.18, 7:06 AM

Useful adjustment settings

WIDE mode (for PC input mode)

You can select the screen size.

NOTE

• Connect the PC before making adjustments. (See page

46.)

• Selectable screen size may vary with input signal type.

1

Press WIDE.

• The WIDE MODE menu displays.

2

Press WIDE or a/b to select a desired item on the menu.

a

Input signal

(640m480)

WIDE MODE

Normal

Cinema

Full

Dot by Dot

Cinema Full Dot by Dot

a

Screen size images.

Input Signal

640g480

Normal

Keeps the original aspect ratio in a full screen display.

Keeps the original aspect ratio in a full screen display. The top and bottom of the image is slightly cropped.

An image fully fills the screen.

Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

LC-45G1H(E)-i 53 04.10.18, 7:06 AM

53

54

LC-45G1H(E)-i

Useful adjustment settings

Input signal (PC input mode only)

• Some input signals may have to be registered manually to display properly.

• The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.

640g400

640g480

1024g768

720g400

848g480

1280g768

Quick Shoot

Improves LCD response when viewing fast-moving images. The effect is greater at low room temperatures

(at or below 15˚C/59˚F).

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Option”.

NOTE

• You can only select the “Input Signal” on the Setup menu when receiving one of the 6 input signals listed above.

1

2

3

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Input Signal” and then press ENTER.

3

Press a/b to select “Quick Shoot”, and then press ENTER.

4

Press c/d to select “On”, and then press

ENTER.

NOTE

• Quick Shoot may cause image noise. If this occurs, turn the function “Off”.

Rotate

You can set the orientation of the picture.

1

Press MENU and the MENU screen displays.

4

Press a/b to select the desired input signal on the display.

2

Press c/d to select “Setup”.

640 x 480

848 x 480

3

Press a/b to select “Rotate”, and then press

ENTER.

4

Press a/b to select the desired mode, and then press ENTER.

(Example)

3D-NR (3D Noise Reduction)

Produces a clearer video image.

1

Press MENU and the MENU screen displays.

Normal

Mirror

Upside Down

Rotate

2

[Mirror]: mirror image.

3

4

[Normal]: normal image.

Press c/d to select “Option”.

ABC

Press a/b to select “3D-NR”, and then press

ENTER.

• Some items may be greyed out. They are not selectable.

Press a/b to select the desired level (Off,

High, Low), and then press ENTER.

[Upside Down]: upside down image.

ABC

[Rotate]: rotated image.

ABC

ABC

54 04.10.18, 7:06 AM

Useful adjustment settings

Mosquito Noise Reduction

Reduces fine detail mosquito noise.

1

Press MENU and the MENU screen displays.

Sleep timer

Allows you to set a time when the TV automatically switches to standby.

2

Press c/d to select “Option”.

3

Press a/b to select “Mosquito Noise

Reduction”, and then press ENTER.

4

Press a/b to select the desired level, and then press ENTER.

1

Press SLEEP.

• Remaining time displays when sleep timer has been set.

Selected item

Off

High

Low

Description

For normal images

For enhanced Mosquito Noise Reduction

For moderate Mosquito Noise Reduction

Audio out

Allows you to select what controls the audio output.

NOTE

• This setting is available only in TV input mode.

1

Press MENU and the MENU screen displays.

Sleep Timer: Remain 2 hr. 00 min.

2

Each time you press SLEEP, the remaining time switches as shown below.

0 hr. 30 min.

1 hr. 00 min.

1 hr. 30 min.

Off

2 hr. 30 min.

2 hr. 00 min.

NOTE

• Select “Off” by pressing SLEEP to cancel the sleep timer.

• When the time has been set, countdown automatically starts.

• Five minutes before the preset of time expires, the remaining time displays each minute.

2

Press c/d to select “Option”.

3

4

Press a/b to select “Audio Out”, and then press ENTER.

Press c/d to select “Fixed” or “Variable”, and then press ENTER.

Selected item

Fixed

Variable

Description

• Sound via speakers is adjusted with VOLl/ k on the remote control unit or the Display.

• Sound via the AV OUTPUT terminal is not adjustable and constantly outputs.

• Sound via the AV OUTPUT terminal is adjusted with VOLl/k on the remote control unit or the Display.

• Sound via speakers is muted.

55

LC-45G1H(E)-i' 55 04.10.18, 7:07 AM

Useful adjustment settings

Password setting for child lock

(for TV input mode)

Allows you to use a password to protect certain settings from being accidentally changed.

7

Enter the same 4-digit number as in step 6 to confirm.

• “The new password is registered.” displays.

NOTE

• To view a locked channel (Lock setting in Programme

Setup “Manual Adjust” is set to “On”), you must enter a password. (See page 26.) When you select a locked channel, a password prompt message pops up. Press

ENTER to display the password input window.

Setting a password (Changing a password)

Register a 4-digit password number to use the Child

Lock function.

1

Press MENU and the MENU screen displays.

Resetting the password

Allows you to reset your password.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Setup”.

2

Press c/d to select “Setup”.

3

4

Press a/b to select “Child Lock”, and then press ENTER.

If you already set the password, enter it here.

– – – –

3

Press a/b to select “Child Lock”, and then press ENTER.

4

If you already set the password, enter it here.

– – – –

5

Press a/b to select “Change password”, and then press ENTER.

Change password

Reset

New Password

Reconfirm

– – – –

– – – –

5

6

Press a/b to select “Reset”, and then press

ENTER.

Press c/d to select “Yes”, and then press

ENTER.

Change password

Reset

Yes No

6

Enter the 4-digit number as a password using

09.

Change password

Reset

New Password

Reconfirm

– – – –

– – – –

NOTE

As a precautionary measure, make a note of your

password and keep it in a familiar place. If you lose or forget your password, initialise the System to return all settings except for the TV channel settings to factory preset values. (See page 66.)

• This function is available for TV input mode.

56

LC-45G1H(E)-i' 56 04.10.18, 7:07 AM

Useful adjustment settings

Centre Channel Input

You can use the speaker as the centre speaker when using a 5.1ch surround system.

Speaker

DVD player, etc.

AV amplifier

* Connect to external audio equipment that supports a 5.1ch surround system.

Refer to your external equipment operation manual for details.

1

Press MENU and the MENU screen displays.

2

Press c/d to select “Option”, and then press

ENTER.

3

Press a/b to select “Centre Channel Input”, and then press ENTER.

4

Press c/d to select “On” , and then press

ENTER.

• Only the sound from the Centre Channel Input terminal is output from the speaker.

On Off

LC-45G1H(E)-j 57 04.10.18, 7:08 AM

57

Useful features

Dual screen functions

Allows you to display two pictures on the screen at one time.

Dual screen

You can display two pictures except when inputting from a INPUT 5 terminal and card.

Picture and still image

You can freeze a motion picture on the display.

1

Press P&P.

• Dual screen displays and a selected input source image displays.

z z

1

Press FREEZE.

• A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

58

LC-45G1H(E)-j

2

3

Press SELECT to set either screen to be active.

• “z” displays on the active screen, which has sound output.

Press TV/VIDEO to select another input source on the active screen.

• A selected image displays.

FREEZE

2

Update the still image by pressing ENTER.

• Each time you press ENTER, the image on the right screen updates.

3

Press FREEZE to exit still image.

4

Press P&P to exit dual screen.

NOTE

• This function does not work under the following input conditions:

1INPUT 5 mode,

2CARD mode,

3Two pictures from the same source (e.g. INPUT 1 and

INPUT 1),

4Two pictures with different vertical frequency (e.g. PAL and PAL-60, PAL (50 Hz) and NTSC (60 Hz)),

5HDTV signal source (480P/1080i/720P) is input on the right side screen display.

• When you press P&P, the current input is moved to the left side screen display, and the previous input appears on the right side screen display. When the vertical frequencies of the two screens are different, such as in

4 above, you cannot acquire dual screen capability, even if you are pressing the button.

When you cannot acquire dual screen capability, perform one of the operations below.

— Select another input whose vertical frequency is same as one of the current inputs (e.g. PAL and PAL).

— Select a channel with no signal, then press P&P.

• When this function is not available, “No dual screen display available.” will display.

NOTE

• This function does not work in INPUT 5 and CARD mode.

• When this function is not available, “No still image display available.” will display.

• Frozen image can be recorded on a PC card (see page

37).

• The still image automatically goes out after 30 minutes.

58 04.10.20, 8:02 AM

LC-45G1H(E)-K

Appendix

Troubleshooting

• No power.

Problem Possible Solution

• Make sure the Display and the AVC System are connected correctly. (See page

7.)

• Check if you pressed POWER on the remote control unit. (See page 17.)

If the indicator on the Display lights up red, press POWER on the display.

• Is the AC cord disconnected? (See page 13.)

• Has the main power been turned on? (See page 17.)

• Unit cannot be operated.

• External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off the Display and the AVC System, or unplugging the AC cord and re-plugging it in after 1 or

2 minutes.

• Remote control unit does not operate.

• Are batteries inserted with polarity (e, f) aligned? (See page 12.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated to remote control sensor?

• Picture is cut off.

• Is the image position correct? (See page 48.)

• Are screen mode adjustments such as picture size made correctly? (See pages

51 to 54.)

• Strange colour, light colour, or dark, or colour misalignment.

• Adjust the picture tone. (See pages 29 to 31 and 54.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 25 and 50.)

• Check the input signal setting. (See page 49.)

• Are both video cable and S-video cable connected to a SCART conversion connector? (See pages 44 and 45.)

• Power is suddenly turned off.

• No picture.

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• Check the power control setting. (See page 33.)

• Is sleep timer set? (See page 55.)

• Is connection to other components correct? (See pages 44 to 46.)

• Has input signal setup been done correctly after connection? (See page 49.)

• Is the correct input selected? (See page 49.)

• Is a non-compatible signal being input? (See page 60.)

• Is picture adjustment correct? (See pages 29 to 31.)

• Is the antenna connected properly? (See page 13.)

• Is “On” selected in “Audio Only”? (See page 48.)

• No sound.

• Is the volume too low? (See page 20.)

• Is “Variable” selected in “Audio Out”? (See page 55.)

• Is the speaker connected properly?

• Is correct speaker output (“SPEAKER-A” or “SPEAKER-B”) selected in “Speaker”?

(See page 47.)

• Is “On” selected in “Centre Channel Input”? (See page 57.)

• Make sure that headphones are not connected. (See page 15.)

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: –20°C to +60°C (–4°F to +140°F).

59

59 04.10.18, 7:10 AM

Appendix

PC compatibility chart

PC/MAC

PC

MAC13"

MAC16"

MAC19"

Resolution

VGA

WVGA

SVGA

XGA

WXGA

SXGA

VGA

SVGA

XGA

640 x 400

720 x 400

640 x 480

848 x 480

800 x 600

1024 x 768

1280 x 720

1280 x 768

1366 x 768

1280 x 1024

640 x 480

832 x 624

1024 x 768

Horizontal Frequency

31.5 kHz

37.9 kHz

31.5 kHz

37.9 kHz

31.5 kHz

37.9 kHz

37.5 kHz

43.3 kHz

31.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

53.7 kHz

48.4 kHz

56.5 kHz

60.0 kHz

68.7 kHz

45.0 kHz

48.1 kHz

48.4 kHz

64.0 kHz

34.9 kHz

49.7 kHz

60.2 kHz

Vertical Frequency

60 Hz

56 Hz

60 Hz

72 Hz

75 Hz

85 Hz

60 Hz

70 Hz

60 Hz

85 Hz

60 Hz

85 Hz

60 Hz

72 Hz

75 Hz

85 Hz

75 Hz

85 Hz

60 Hz

60 Hz

60 Hz

60 Hz

67 Hz

75 Hz

75 Hz

VESA Standard

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

O

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

DDC is a registered trademark of Video Electronics Standards Association.

Power Management is a registered trademark of Sun Microsystems, Inc.

VGA and XGA are registered trademarks of International Business Machines Co., Inc.

1 3 5 7 9 111315171921

1.

2.

3.

4.

5.

6.

7.

2 4 6 8 101214161820

SCART (INPUT 1)

1.

2.

3.

4.

5.

6.

7.

Audio right output (TV Monitor out)

Audio right input

Audio left output (TV Monitor out)

Common earth for audio

Earth for blue

Audio left input

Blue input

SCART (INPUT 2)

Audio right output

Audio right input

Audio left output

Common earth for audio

Earth

Audio left input

Not used

1.

2.

3.

4.

5.

6.

60

7.

SCART (INPUT 3)

Audio right output

Audio right input

Audio left output

Common earth for audio

Earth

Audio left input

Blue input

8.

Audio-video control

9.

Earth for green

10.

Not used

11.

Green input

12.

Not used

13.

Earth for red

14.

Not used

Connecting pin assignments for

SCART

Various audio and video devices may be connected via the SCART terminals.

Use SCART cable when inputting RGB signal. (INPUT1/INPUT3)

15.

Red input

16.

Red/Green/Blue control

17.

Earth for video

18.

Earth for Red/Green/Blue control

19.

Video output (TV Monitor out)

20.

Video input

21.

Plug shield

8.

Audio-video control

9.

Earth

10.

AV LINK control

11.

Not used

12.

Not used

13.

Earth

14.

Not used

8.

Audio-video control

9.

Earth

10.

Not used

11.

Green input

12.

Not used

13.

Earth

14.

Not used

15.

Chroma S-Video input

16.

Not used

17.

Earth for video

18.

Earth

19.

TV Monitor output

20.

Video input/S-video input

21.

Plug shield

15.

Red input/Chroma S-Video input

16.

Red/Green/Blue control

17.

Earth for video

18.

Earth

19.

TV Monitor output

20.

Video input/S-video input

21.

Plug shield

LC-45G1H(E)-K 60 04.10.18, 7:10 AM

Appendix

RS-232C port specifications

PC Control of the System

• When a program is set, the display can be controlled from the PC using the RS-232C terminal.

The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.

Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the connections.

NOTE

• This operation system should be used by a person who is accustomed to using PCs.

Communication conditions

Set the RS-232C communications settings on the PC to match the display’s communications conditions. The display's communications settings are as follows:

Baud rate:

Data length:

Parity bit:

Stop bit:

Flow control:

9,600 bps

8 bits

None

1 bit

None

Communication procedure

Send the control commands from the PC via the RS-232C connector.

The Display operates according to the received command and sends a response message to the PC.

Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command.

Command format

Eight ASCII codes e CR

C1 C2 C3 C4 P1 P2 P3 P4

Command 4-digits Parameter 4-digits

Command 4-digits: Command. The text of four characters.

Parameter 4-digits: Parameter 0 – 9, space, ?

Return code

Parameter

Input the parameter values, aligning left, and fill with space (s) for the remainder. (Be sure that four values are input for the parameter.)

When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)

0

0 0 0 9

– 3 0

1 0 0

0 0 5 5

When “?” is input for some commands, the present setting value responds.

?

?

?

?

?

61

LC-45G1H(E)-K 61 04.10.18, 7:10 AM

Appendix

Response code format

Normal response

O K

Return code (0DH)

Problem response (communication error or incorrect command)

E R R

Return code (0DH)

Commands

CONTROL ITEM

POWER SETTING

INPUT SELECTION A

CHANNEL

INPUT SELECTION B

AV MODE

SELECTION

VOLUME

COMMAND PARAMETER

CONTROL

CONTENTS

P O W R 0 _ _

I

I T G D x

T V D x _

I A V D *

I C R D x

_

D C C H * * _

_

_

_

_

_

_

POWER OFF (STANDBY)

INPUT SWITCHING (TOGGLE)

TV (CHANNEL FIXED)

INPUT1 – 5 (1 – 5)

C H U P x

CARD

TV DIRECT CHANNEL (1 – 99)

CHANNEL UP

CHANNEL DOWN C H D W x

I

I

I N

N

N

P

P

P

1

1

2

0

1

0

_

_

_ _

_

_

_

_

_

_

_

INPUT1 (CVBS)

INPUT1 (RGB)

INPUT2 (CVBS)

INPUT2 (Y/C)

I

I

I

I N P 2 1 _

N

N

N

P

P

P

3

3

3

0

1

2

_

_

_ _

_

_

_

_

_

_

_

INPUT3 (CVBS)

INPUT3 (Y/C)

INPUT3 (RGB)

INPUT3 (COMPONENT)

I

I

I

I N P 3 3 _

N

I

N P 4 1 _

I N P 4

2 _

N

N

P

P

P

4

5

5

0

0

1

_

_

_

_

_

_

_

_

_

_

_

INPUT4 (AUTO)

INPUT4 (S-VIDEO)

INPUT4 (VIDEO)

_

_

Digital PC

Analogue PC

I

I

A

N

N

V

A V

P

P

5

5

M D

2

3

0

M D 1

_

_

_

_

_

_

_

_

_

_

_

_

Digital AV

Analogue AV

TOGGLE

STANDARD

A V

A V

M D 2

M D 3

_

_

A V M D 4 _

A V M D 5 _

V O L M * * _

_

_

_

_

_

_

_

_

MOVIE

GAME

USER

DYNAMIC

_ VOLUME (0 – 60)

CONTROL ITEM

POSITION

WIDE MODE

MUTE

DOLBY VIRTUAL

DUAL SCREEN

AUDIO CHANGE

SLEEP TIMER

C

W

W

W

W

W

W

W

W

W

W

L C

P H

I

I

I

I

COMMAND PARAMETER

H

H

V

V

P

P

P

P

O

O

O

O

S

S

S

S

*

*

*

*

*

*

*

*

*

*

*

*

_

_

_

_

CONTROL

CONTENTS

H-POSITION (AV) ( ⳮ10 – Ⳮ10)

H-POSITION (PC) (0 – 180)

V-POSITION (AV) ( ⳮ20 – Ⳮ20)

V-POSITION (PC) (0 – 100)

I

I

I

I

I

I

S

D

D

D

D

D

D

D

D

D

D

K *

E

E

E

E

E

E

E

E

E

E

E

*

0

1

2

3

4

5

6

7

8

9

*

*

_

_

_

_

_

_

_

_

_

_

*

*

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

_

CLOCK (0 – 180)

PHASE (0 – 40)

TOGGLE (AV)

NORMAL (AV)

ZOOM 14:9 (AV)

PANORAMA (AV)

FULL (AV)

CINEMA 16:9 (AV)

CINEMA 14:9 (AV)

NORMAL (PC)

CINEMA (PC)

FULL (PC)

W I D E 1 0 _ _

M

U T E 0 _

M U T

E 1 _

M U T E 2

_

_

_

_

_

_ _

DOT BY DOT (AV/PC)

TOGGLE

MUTE

MUTE OFF

TOGGLE

ON

A

A

C

C

D

D

V

V

0

1

_

_

A C D V 2 _

T W I

T W I

N

N

0

1

A C H A x

_

_

_ _

_ _

_ _

_ _

_ _

OFF

DUAL SCREEN OFF

DUAL SCREEN ON

TOGGLE

O F T M 0 _

O F T M 1 _

O F T M 2 _

O F T M 3 _

_

_

_

_

_

_

_

_

OFF

SLEEP TIMER 30 MIN

SLEEP TIMER 1 HOUR

SLEEP TIMER 1 HOUR 30 MIN

O F T M 4 _

O F T M 5 _

_ _

_ _

SLEEP TIMER 2 HOUR

SLEEP TIMER 2 HOUR 30 MIN

NOTE

• If an underbar (_) appears in the parameter column, enter a space.

• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

62

LC-45G1H(E)-K 62 04.10.18, 7:10 AM

Appendix

Specifications

Item

LCD panel

Number of dots

Video Colour System

TV

Function

TV-Standard

Colour System

Receiving

Channel

VHF/UHF

CATV

TV-Tuning System

STEREO/BILINGUAL

Brightness

Backlight life

Viewing angles

Audio amplifier

Speakers

Terminals

AVC

System

Rear

ANTENNA IN

INPUT 1

INPUT 2

Front

45o LCD COLOUR TV, Model:LC-45G1H (Display) TU-45GAH (AVC System)

45o Advanced Super View & BLACK TFT LCD

6,220,800 dots (1920 g 1080 g 3 dots)

PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

CCIR (B/G, I, D/K, L, L’)

PAL/SECAM/NTSC 4.43/PAL 60

44.25-863.25 MHz

Hyper-band, S1–S41ch

Auto Preset 99 ch

NICAM/A2

450 cd/m 2

60,000 hours (at Backlight Standard position)

H : 170° V : 170°

10W g 2

Ø 8 cm 2pcs, Ø 2.5 cm 2pcs

UHF/VHF 75 q Din type

SCART (AV input, RGB input, TV output)

SCART (AV input/output, Y/C input, AV Link)

INPUT 3

INPUT 5

SCART (AV input/output, Y/C input, RGB input), RCA pin (Component input)

Ø 3.5 mm jack (Audio input), DVI-I (DVI-I input)

AV OUTPUT RCA pin (AV output)

*

Audio: Variable/Fixed

DC OUTPUT DC9V 7W MAX

SPEAKER-B External speaker output terminal (L and R)

CENTRE

CHANNEL

INPUT

Digital-AUDIO

OUTPUT

RS-232C

INPUT 4

RCA pin

Square type optical digital audio connector (S/PDIF)

D-sub 9pin male connector

S-VIDEO (Y/C input), RCA pin (AV input)

OSD language

Power Requirement

Power

Consumption

AVC System

Display

Weight AVC System

Display

Accessories

Headphones Ø 3.5mm jack (Audio output)

PC Card slot PC Card Type II (PC Card Adapter)

English/Chinese

AC 110–240 V, 50 Hz

44 W (0.6 W Standby)

240 W (1.0 W Standby) (Method IEC60107)

6.9 kg (w/o stand), 7.1 kg (with stand)

22.4 kg (Display only), 26.8 kg (with Display and speakers), 31.0 kg (with Display, speakers and stand)

Remote control unit, System cable, AC cord (g2), “AAA” size battery (g2), AVC system stand unit, Cable clamp, RCA/SCART conversion connector (g3), Operation manual

• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

63

LC-45G1H(E)-K 63 04.10.18, 7:10 AM

Dimensional drawings

Display

989.1

677

1084

200

120

95

187

145

86.5

Unit: mm

64

LC-45G1H(E)-K 64 04.10.18, 7:10 AM

Dimensional drawings

AVC System

365

430

2

49 220

303

Unit: mm

LC-45G1H(E)-K 65 04.10.18, 7:10 AM

65

HOW TO SET THE FACTORY PRESETS

Turn off the Display by pressing POWER on the Display.

Press and hold down RESET on the AVC System and press POWER on the Display to turn on the System.

All setting items (except TV channel) return to the factory presetting.

NOTE

• Running the factory presetting operation also clears the password.

You can run the Auto Installation again by using the following steps.

1

Turn on the power of the Display and the AVC System.

2

Press MENU. (Make sure the menu screen displays.)

3

Press c/d to select “Setup”.

4

Press a/b to select “Auto Installation”, and then press ENTER.

5

Press c/d to select “Yes”, and then press ENTER.

The password is .

NOTE

• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar place.

66

LC-45G1H(E)-K 66 04.10.18, 7:10 AM

SHARP CORPORATION

Printed on 100% post-consumer recycled paper.

Printed in Japan

TINS-B662WJZZ

04P11-JKG

45oDISPLAY/

LC-45G1H

AVC SYSTEM/

TU-45GAH

LCD COLOUR TELEVISION

OPERATION MANUAL

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents