LC-XT3 XGA Theater Projector

A-key to better communications

EIKI Exhibit, Booth 19068, INFOCOMM 2000.

Sands Expo Center, Las Vegas, Nevada

For Release June 12, 2002.

NEW PRODUCT ANNOUNCEMENT

LC-XT3

XGA Theater Projector

4-lamp 3-panel LCD projector puts 10,000 ANSI Lumens bright images on screens up to 40’ wide, at 1024 x 768 pixel resolution.

Designed for large audiences and demanding environments, the EIKI LC-XT3 XGA THEATER

PROJECTOR delivers an impressive 10,000 ANSI Lumens brightness, and offers a new level of connectivity and projection flexibility.

The LC-XT3’s high brightness results from the use of a 4 x 250 Watt UHP lamp system, which provides stable illumination and color temperature over the life of the lamps. The result is illumination uniformity of 90%, and a impressive 700:1 contrast ratio.

The LC-XT3 incorporates leading edge technologies for better imaging, including PanelLink‘ support for artifact-free DVI data communications, digital video noise reduction circuitry, and enhanced progressive scan for better stills and animations.

The LC-XT3 supports analog and digital data input, and Composite, S-Video and Component video input, and is HDTV compatible. Inputs are modular, for rapid reconfiguration. An HD-

SDI decoder and Upconverter video module are available.

The LC-XT3 is offered without lens, and accepts a range of interchangeable lenses, both fixed and variable focal length, both manual and powered, providing throw-to-width ratios of from

0.8:1 to 9.5:1, to fill screens up to 600" diagonal (40’ wide).

With a dot clock of 230 MHz, the LC-XT3 is compatible with most workstations. Its native resolution is 1024x768 pixels, for true XGA/MAC19 display. And Smart compression and expansion provides compatibility with inputs from UXGA to VGA resolution.

Power lens shift minimizes keystoning all four both directions, permitting offset ratios as high as

10:0~0:10 vertically, and 11:9~9:11 horizontally, for real setup flexibility. Wireless and wired remote control, plus local control and RS-232 control, are standard.

The LC-UXT3, a 9000 ANSI Lumen UXGA THEATER projector, is also available.

For more information, please contact:

Tony Janicki, Manager - Marketing Communications

Tel: 949-268-1814 Fax: 949-457-7878 E-Mail: [email protected]

EIKI INTERNATIONAL, INC.

30251 ESPERANZA, RANCHO SANTA MARGARITA, CA. 92688-2130

TEL: (800) 322-3454 • FAX: (800) 457-3454