Orla TD36 User manual

Add to my manuals
24 Pages

advertisement

Orla TD36 User manual | Manualzz

Electronic Drum

TD36

Precaution

Thank you for purchasing this electronic instrument.For perfect operation and security, please read the manual carefully and keep it for future reference.

Safety Precautions

CAUTION

RISK OF ELECTRIC

DO NOT OPEN

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the product.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

(Figure 1)

7) Do not block any ventilation openings, install in accordance with the manufacturer s instructions. 8)

Do not install near the heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug hase two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, if the provided plug does not fit into your outlet. consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs. convenience receptacles, and the point where they exit from the apparatus. 11)

Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over(Figure 1).

13) Unplug this apparatus during lightning storms or when unused for a long periods fo time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Always make sure all batteries are inserted in conformity with the +/- polarity markings.

Always replace all batteries at the same time. Do not use new batteries together with old ones. Also, do not mix battery types, since this can cause overheating, fire, or battery filuid leakage.

Remove the batteries from the instrument if it is not to be used for a long time.

Contents

Panel Controls...

Assembly Instruction ...

Connect...

Connecting the Power Supply...

Connecting a CD Player, etc.(AUX In jack)...

USB MIDI...

Connecting Headphone

Start to Play the Drum ...

Switch the Power On ...

Set the Master Volume ...

Select Drum Kits ...

KIT Button ...

CLICK Button ...

REC/PLAY Buttion...

SONG Button ...

TEMPO/TAP Button ...

Factory Set ...

Drum Kits List ...

Voice List ...

Style List ...

MIDI Implementation Chart ...

Specifications...

1

9

10

11

12

9

9

9

9

13

14

15

16

18

19

20

8

8

2

6

8

8

8

Panel Controls

Top Panel

1

2

5

Rear Panel

8

CONNECT

TO BASE RIDE CRASH

9

HI-HAT

3 4

7

6

10

SNARE USB

AUX IN PHONES

11 12

Back Panel of bottom case

13 14 15

POWER CONNECT

ON OFF

DC 9V TO MODULE

2

Panel Controls

Top Panel

1.MASTER VOLUME

2.[TEMPO/TAP] Button

3.[KIT] Button

4.[CLICK] Button

5.[REC/PLAY] Button

6. [SONG] Button

7.[+][-] Button

This is used to adjust LINE OUT volume, headphone volume and LINE IN volume.

This button is used to change the song's tempo and metronome tempo, allows you to tap the tempo on the pad to change the song's tempo.

This button is used to set the volume and voice of the pad.

This button is used to enter metronome setting display, to adjust metronome volume, metronome sound and type.

This button is used to enter recording display, you can also select user song playing mode.

This button is used to enter the song select display. You can turn off the percussion track of the song, and adjust the song's volume.

This button is used to select the parameters, voices, etc.

3

Panel Controls

Real Panel

8. CONNECT TO BASE

9.Trigger Input Jacks

10.USB

11.AUX IN

12.PHONES

Back Panel of bottom case

This jack is used to connect the module to Back Panel of bottom case.

These jacks are used to connect the pads to the Module.

(HI-HAT, RIDE, CRASH, SNARE)

This is USB MIDI jack. Connect PC or other USB host devices that support USB audio with a standard USB cable to transfer MIDI data.

Connect the output of an external audio device, etc., to this jack (stereo mini jack).

This is convenient for playing along with music from a

CD or cassette player.

Connect a pair of headphones to this jack.

13.POWER ON/OFF

14.DC 9V

15. CONNECT TO MODULE

This is the power switch.

Connect an DC adaptor to this jack.

This jack is used to connect Back Panel of bottom case to the module.

The LED dot indicates the SONG/PAD/KIT status; on the status of SONG, the song number appears on the display; In PAD selection mode, the pad name such as Snare, Crash, and Tom, etc.

Will appear on the display. Press KIT button, the drum kit number will be displayed on the LED.

KIT mode

SONG mode

PAD name

4

Assembly Instruction

Take out the bottom case from the packing case, insert the drum stand into the bottom case as shown in the figure and tighten the

T-screw.

Take out the module and three Tom pads from the packing case, insert them into drum stand as shown in the figure and tighten the

T-screw.

Take out the cymbal poles from the packing case, insert them into pad hole as shown in the figure and tighten the T-screw.

Assemble Crash cymbals as shown in the figure and tighten the T-screw.

5

Assembly Instruction

Assemble Hi-Hat cymbal as shown in the figure and tighten the T-screw.

Take out Snare pole from the packing case, insert it into drum stand as shown in the figure and tighten the T-screw.

Take out Snare pad from the packing case, insert it into Snare pole as shown in the figure and tighten the T-screw.

As shown in the figure,electronic drum installation is completed.

6

Assembly Instruction

Hi-Hat Foot Controller

---It can produce hi-hat closed sound if you hit hi-hat when pressing foot controller. ---It can produce hi-hat open sound if you hit hi-hat without pressing foot controller. ---Press foot controller directly to produce hi-hat pedal sound.

---The hi-hat tone changes smoothly from open to closed in response to press the pedal while hitting the hi-hat.

7

Connect

Connecting the Power Supply

Make sure the power is switch OFF and connect the power adaptor to the DC 9V jack on the rear panel.

AC POWER

Connecting a CD Player, etc. (AUX In jack)

The audio output from a CD player connected to the AUX IN jack on the rear panel can be mixed with the sound of the drum brain. This function is convenient when you want to play along with a favourite song.

The volume of the external signal is adjusted with the MASTER VOLUME knob.

CD player

AUX IN

USB MIDI

Connect PC or other USB host devices that support USB audio with a standard USB cable. For devices with USB cable, after the driver is installed and initialization is finished, you can choose USB audio device in the device menu of the software to transfer midi data.

Connecting Headphone

The headphone can be connected to the electronic drum. The headphone jack is located on the front of the module. Use the

PHONE VOLUME knob to adjust the headphone volume.

8

Start to Play the Drum

Switch the Power On

After confirming that each of the devices, pads, external devices, etc. are all properly connected, turn the power on. The drum module is ready to operate when the display shown below, for selecting the drum kit.

POWER

ON OFF

Set the Master Volume

Use the [MASTER VOLUME] knob to adjust the main volume

MASTER VOLUME

MIN MAX

Select Drum Kits

Press [KIT] button, The current kit number appears. you can use the [+/-] button to select kits that you want.range:001-010,USER

KIT

[KIT] Button

Press [KIT] button and press [+] or [-] button to adjust the Volume of pads.range:000-127.

KIT

-

9

Start to Play the Drum

1. Selecting Voice

Press [KIT] button and [REC/PLAY] button,then hit the pad , use [+] [-] to select the Voice .

For example:to select TOM1 voice.

Press [KIT] button and [REC/PLAY] button,LED displays current drum number . then hit the TOM1 LED displays t1 ,then LED displays TOM1 instrment . hit the pad go on or use [+] [-] to select the Voice.In this mode you also can press

[CLICK] button to listen to the voice, press [REC/PLAY] button to Deposited in user kit.

Press the other button to exit the voice.

[CLICK] Button

Press [CLICK] button to turn on or turn off metronome. a. Click Type

Press [CLICK] button 2 seconds to enter the metronome type choice,use [+] [-] to select click type:

1/4, 2/4, 3/4, 4/4, 6/4, 3/8, 6/8, 12/8. default: 4/4

10

Start to Play the Drum

b. Click Sound

CLICK on, press[click] button and use [+] or [-] button to select click sound. default: 001-003.

+ c. Click Volume

CLICK off, press [CLICK] button and use [+]or[-]button to select click volume,range:000-032.

+

[REC/PLAY] Button a. Recording

Press [REC/PLAY] button 2 seconds,begin recording after four Metronome noise. b. Playing Record

Press [REC/PLAY] button , it will Playing Record. Press [REC/PLAY] button again, to stop play.

11

Start to Play the Drum

[SONG] Button

Your drum provides 10 preset songs and 1 Demo.

Press [SONG] and [KIT] button to start or stop the song. a.Drum On/Off

In [SONG] mode, press [SONG] button 2 seconds, LED displays oN or oFF

On------turn on the percussion track of the song.

Off------turn off the percussion track of the song. b.Select the songs

Press [SONG] button,then use [+] or [-] to select 10 songs and 1 demo. c.Song volume

In [SONG] mode, press [SONG] button and use [+] or [-] to adjust the song volume.

Range:000-032.

-

12

Start to Play the Drum

[TEMPO/TAP] Button

Tempo function, you can adjust tempo by using [TEMPO/TAP] button.

Press [TEMPO/TAP] button ,LED displays current tempo, use [+] or [-] button to adjust tempo value. Range: 020-240

Press [TEMPO/TAP] button 2 seconds to enter the TAP mode , LED displays will flash , Tap on the pad 4 times to change the tempo also.

+

13

Factory Set

Turn off the power.

Hold down [+] and [-] buttons, then turn the power on, it can restore all internal settings to factory set.

-

+ a.Reseting

Turn off the power.

Hold down [KIT] buttons, then turn the power on to e nter setup mode:

Press [TEMPO/TAP] button ,use[+]or [-]button to set sensitivity. range 001-008

Press [KIT] button ,use[+]or [-]button to set threshold. range 000-050

Press [SONG] button ,use[+]or [-]button to set velocity curve. There are four velocity curves from which to choose Normal(nor), Dynamic(dyn), EASY(ESy), and Fixed

(fId).

Press [CLICK] button ,use[+]or [-]button to set XTALK . range 000-080

Press [REC/PLAY] button to save above settings. Once turn off the power, it will be not saved.

14

Drum Kits List

Kits No

Kits1

Kits2

Kits3

Kits4

Kits5

Kits6

Kits7

Kits8

Kits9

Kits10

Kits11

15

Kits name

Acoustic_kit_1

Acoustic_kit_2

Room_kit NL

Rock_kit

Dance_club_kit

Jazz_kit

Electronic_kit

Analog_kit

Latin_kit

Modern R&B

User

Voice List

Group 1: Kick Drums

Group 2: Snare Drums

Group 3: Toms

16

Voice List

Group 4: Cymbals

Group 5: Hi -hats

17

Style List

Style No

01

05

06

07

08

02

03

04

09

10

18

Style name

Rock Shuffle

Surf Pop

Techno

60's Rock

Hard Rock

Pop Bossa

80's Rock

16 Beat

Pop Shuffle

Guitar Pop

MIDI Implementation Chart

Function

Basic Default

Channel Changed

Mode Default

Messages

Altered

Note

Number True voice

Velocity Note ON

Note OFF

Aftertouch

Pitch Bend

Control Change 0, 32

1

5

6

7

10

11

64

65

66

67

80, 81

91, 93

100,101

121

0~127

*

O 99H,v=1~127 O 9nH,v=1~127

X

X

X

X

X

X

X

X

X

X

X

X

X

X

Transmitted

1-16

1-16 each

Mode 3

X

*

O 89H,v=0

X

X

X

Recognized

1-16

1-16 each

Mode 3

X

X

0~127

0~127

O 8nH,v=0 or 8nH

X

O

X

O

O

O

O

O

O

O

O

O

O

O

O

O (*1)

O

Remarks

Memorized

Bank Select

Modulation

Portamento time

Data Entry

Volume

Pan

Expression

Sustain

Portamento

Sostenuto

Soft pedal

DSP TYPE

DSP DEPTH

RPN LSB,MSB

Reset all Controllers

Program

Change True number

System Exclusive

System Song Pos

Common Song Sel

Tune

Aux Local on/off

Messages All Notes Off

Active Sense

Reset

O 0-10

X

X

X

X

X

O

X

X

O 0-127

0-127

X

X

X

X

X

O

O

O

All Notes Off is sent as All Sound Off

(CC# 120)

Mode1:OMNI ON, POLY Mode2:OMNI ON, MONO O: Yes

Mode3:OMNI OFF, POLY Mode4:OMNI OFF, MONO X: NO

*1: Registered parameter number:

#0: Pitch sensitivity

#1: Fine tuning

#2: Coarse tuning

19

Specifications

Drum Pads: 1 Snare , 3 TOM Pads, 2 Cymbal Pads,

Display:

Polyphony:

Voice Control:

Drum Sets :

1 Hi-Hat, 1 Hi-Hat Control, 1 Bass Drum

Multi-Function LED Display.

32 Notes Max

173 Percussion Voices

10 preset drum kits and 1 user drum kit

Styles:

Pad Control:

10 Styles

Interface:

Sensitivity; Threshold ;Velocity Curve;XTALK

Demo:

Song recording:

Real-time Record and Playback.

Others:

1 Song

Tap, Click Level, Click Sound, Click Tempo,

Metronome (1/4, 2/4, 3/4, 4/4, 6/4, 3/8, 6/8, 12/8)

DC 9V Power Socket, PHONES, USB , CONNECT

TO BASE, RIDE, CRASH, HI-HAT, SNARE,

AUX IN.

10505774V1.0

20

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement