Bobcat 250

Bobcat 250
ENGINE DRIVEN
Bobcat 250
Part No: MR907565001-1 [Kubota Diesel Engine]
Part No: MR907565001-2 (with VRD) [Kubota Diesel Engine]
IMPROVED DESIGN. NOW SMALLER & LIGHTER.
Up to
24kg
Lighter
IMPROVED!
SMALLER &
LIGHTER DESIGN
Takes up less space on
trucks and trailers - leaving
more room on your truck for
other equipment and tools.
IMPROVED! EASIER
MAINTENANCE
With front panel
maintenance displays, you
know when your equipment
needs to be serviced.
LONG RUNTIMES
Large 45L fuel capacity
means many hours of run
time before refuelling.
VERSATILE AC AND
DC WELD OUTPUT
Provides quality welds on
all types of metals. DC is
smooth and easy to run
while AC Stick is used
when arc blow occurs.
DESIGNED FOR
RELIABILITY
Copper windings and
iron generator components
for a quality built machine.
Lugged - not soldered
- heavy internal leads for
better field durability.
Superior cooling
technology for maximum
performance and engine life.
Super-tough armour
to protect the welder/
generator from
accidental impact.
APPLICATIONS
PROCESSES
Maintenance
Repair
Rural
Fabrication
Structural Steel Work
Stand-Alone Generator
Stick (SMAW)
Flux-Cored (FCAW)
MIG (GMAW)
DC TIG (GTAW)
Non-Critical (GTAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
(4.8mm Carbons)
Air Plasma Cutting and
Gouging with Optional
Spectrum Models
Lift hook integrated into
the centre frame, which
bolts to the machine’s
base for greater durability.
AUXILIARY OUTPUT*
MULTI-PROCESS
CAPABILITY
3 YEAR WARRANTY
MIG, Stick, DC, AC, TIG.
SMOOTH
GENERATOR POWER
Revolutionary ten degree
skewed rotor design
optimises generator
performance. Typical
equipment which can be run
includes hand tools, circular
saw, air compressor and
flood lights.
2 X 15 Amp Sockets.
RCD.
1 X 32 A 240 V 1PH 60Hz.
Welder/generator is
warranted by Miller for
3 years, parts and labour.
For details, refer to
Miller’s True Blue warranty
statement. Engine is
warranted separately by
engine manufacturer.
*Generator auxiliary power is 60Hz, and intended for operating equipment associated with
welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment
incorporating induction motors, such as pumps, fans, air compressors, refrigeration or
air-conditioners, may not operate correctly and could be damaged. Refer to appliance
supplier or manufacturer to confirm suitability.
WELDING
MODE
PROCESS
AMP/VOLT
RANGE
RATED
OUTPUT
GENERATOR
POWER
DIMENSIONS
(MM)
WEIGHT
(WITHOUT FUEL)
CC/AC
CC/DC
Stick/TIG
250 A at 25 V,
100% Duty Cycle
MIG/FCAW
Peak:
11,000 Watts
Continuous:
9,500 Watts
44 A, 240 VAC,
60 Hz
H: 711
H: 873 (to top
of exhaust)
W: 508
D: 1153
289kg
CV/DC
40 - 130 A
60 - 160 A
80 - 225 A
100 - 250 A
17 - 22 V
20 - 28 V
250 A at 28 V,
100% Duty Cycle
welding.com.au 1300 300 884
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement