A PWS1-0 PipePro Weld Sys.qxd:A PM1-0 PipePro Weld

A PWS1-0 PipePro Weld Sys.qxd:A PM1-0 PipePro Weld
PipePro Welding System
™
Issued Sept. 2007 • Index No. PWS/1.0
Multiprocess Pipe
Welding Systems
Root-Fill-Cap Welding
Quick
Specs
Pipe Welding Applications
Processes
Process Piping
Offshore Piping
Onshore Piping
Pipe Fabrication
Field Construction
Stick (SMAW)
TIG (GTAW)
Air Carbon Arc Cutting and Gouging
(CAC-A) (3/8 in carbons max.)
MIG (GMAW)
RMD™ Pro (Modified Short Circuit)
Pro-Pulse™ MIG (GMAW-P)
Pulsed MIG (GMAW-P)
Flux Cored (FCAW)
Rated Output
Voltage Range
Ship Weight
450 A at 44 VDC, 100% Duty Cycle
10 – 44 V
PipePro 450 RFC: 163 lb (72.9 kg)
PipePro 12RC SuitCase: 25.5 lb (11.6 kg)
PipePro DX Feeder: 45 lb (20.4 kg)
PipePro Dual DX Feeder: 87 lb (35.5 kg)
Bernard® PipeWorx 250-15: 9 lb (4.1 kg)
Bernard PipeWorx 300-15: 10 lb (4.6 kg)
Bernard PipeWorx 400-15: 10 lb (4.6 kg)
The Power of Blue .
®
PipePro 12RC
SuitCase
Provides a durable
wire feeder solution
for field applications.
The impact-resistant
case design protects
the wire and drive
mechanism from
moisture, dust and
contamination.
with DX Feeders
The PipePro 450 RFC power source can be
combined with either the PipePro SuitCase™
or PipePro DX Bench Feeders and Bernard
PipeWorx™ Guns to offer a total solution for
pipe welding applications in the shop or field.
™
PipePro DX Bench Feeder
Provides a reliable wire feeder solution for
shop applications. The dual-feeder version
allows the operator to easily switch from one
process/wire for root pass welding to another
process/wire for fill and cap welding.
IMPROVED WELD PERFORMANCE
Regulated Metal Deposition (RMD™ Pro)
Precisely controlled short-circuit transfer
technology provides welders with an easy
to use welding process with excellent
puddle control for the root pass. Calm,
stable arc/puddle reduces weld training and
improves quality.
PipePro 450 RFC
Provides one versatile power source to produce
pipe welds using conventional and advanced
processes in shop and field applications.
Pro-Pulse™
This method of pulse welding is easier to use
than conventional pulse in out-of-position pipe
welding applications. This is accomplished
through precise control of the arc and puddle
even in narrow joints, which provides optimum
molten puddle control for out-of-position
welding. Precise control of puddle produces
excellent side wall fusion on all pipe joint designs.
Bernard PipeWorx 250-15
Provides an ergonomic solution to
producing root passes on pipe and
other medium-duty applications.
Designed by welders to reduce fatigue
and improve visibility of the
puddle on the root pass.
Bernard PipeWorx 300-15
or 400-15 Provides a
heavy-duty solution to
producing root, fill and
cap welds on pipe.
Power source is warranted for 3 years, parts and labor.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
PipePro 450 RFC Welding System
™
(See page 3 for programs available for PipePro 450 RFC.)
The PipePro 450 Welding System provides one versatile solution for pipe
welding in a package for both field and shop fabrication. Standard welding
processes include new patented RMD™ Pro and Pro-Pulse™, conventional
MIG, GMAW-P, FCAW, Stick, TIG, and Air Carbon Arc Cutting. The RMD
Pro and Pro-Pulse welding processes are optimized for steel and stainless
steel pipe. Programs are provided for the most common gases, wire types
and wire diameters used in the pipe welding industry. Contact Miller for
more information on less common materials and gas combinations.
PipePro™ 450 RFC Features
Auto-Line™
Allows for any input voltage hook-up (190 – 630 V, 50/60 Hz) with no manual linking. Compensates for voltage spikes
and drops within the entire range.
1/4-turn connectors
Allow for faster installation of system and reduces thread stripping.
Multiprocess
Select from Stick, TIG, MIG, GMAW-P, RMD Pro, Pro-Pulse MIG, FCAW and Air Carbon Arc.
Wind Tunnel Technology
Circulates air over components that require cooling, not over electronic circuitry, which reduces contaminants
and improves reliability.
Field or Shop
Can be used with either a SuitCase feeder for field construction, or a single or dual bench-style feeder for shop fabrication.
Fan-On-Demand™
Cooling system operates only when needed. Reduces amount of airborne contaminants pulled through the machine.
Easy to operate
Simple front panel layout makes it easy to select programs.
™
Specifications
(Subject to change without notice.)
Rated
Output
Voltage
Range
Amperage
Range in
CC Mode
Max.
Open-Circuit
Voltage
Amps Input at Rated Output
for Typical Voltages +/- 10%, 50/60 Hz
208 V 230 V 400 V* 460 V* 575 V
KVA
KW
Dimensions
450 A at 44 VDC,
100% Duty Cycle
10 – 44 V
5 – 600 A
80 VDC
67
23.8
22.9
H: 41 in (1041 mm)
W: 15-1/2 in (394 mm)
D: 22 in (559 mm)
59
34
29
23
Ship
Weight
163 lb
(72.9 kg)
*Note: CE units are limited to 400 V nominal.
Control Panels
Back Panel
Front Panel
7
1
11
2
3
12
8
13
4
5
9
10
6
1. Voltage/Arc Adjust
Display Meter
2. Program Display
3. Program # Select
4. Power Switch
2
5. Process Setup Button
• Weld Process
• Wire Size and Type
• Gas Type
6. Control Knob
7. Wire Speed/Amperage
Digital Display Meter
8. Palm™/PC RS-232 Ports
9. Wire Feed/Amperage Select
10. Arc Control and Inductance
Control
11. Peripheral Connector
12. Remote Connector
13. Wirefeed Connector
Welding Process Capabilities
RMD™ (Regulated Metal Deposition) Pro
RMD Ball Transfer
A precisely controlled short-circuit metal transfer that provides a calm, stable arc
and weld puddle. This provides less chance of cold lap or lack of fusion, less
spatter and a higher quality root pass on pipe. The stability of the weld process
lessens the puddle manipulation required by the welder and is more tolerant to
hi-lo conditions, reducing training requirements. Weld bead profiles are thicker
than conventional root pass welds which can eliminate the need for a hot pass,
improving weld productivity. In some stainless steel applications, it may be
possible to eliminate the backing (purge) gas to further improve productivity
and reduce welding costs.
Current
Wave Form
<- Wet -> Pinch
Clear
Blink
Ball
Background
Pre-short
Ideally suited to root pass welding
Tolerant to hi-lo fit-up conditions
Thicker root passes can eliminate hot pass
Consistent side wall fusion
More tolerant of tip to work distance
Eliminate backing gas on some stainless steel applications
Less weld spatter
Less welder training time
Pro-Pulse ™
This method of pulse welding provides a shorter arc length, narrower arc cone
and less heat input than with traditional spray pulse transfer. Since the process
is synergic, arc wandering and variations in tip-to-work distances are virtually
eliminated. This provides easier puddle control for both in-position and out-of
position welding, reducing welder training time. The process also improves fusion
and fill at the toe of the weld, permitting higher travel speeds and higher deposition.
This process coupled with RMD Pro for root pass welding permits welding
procedures with one wire and one gas to eliminate process switch-over time.
Ideally suited to fill and cap
pass welding
Shorter arc lengths and narrow arc
cone for out-of-position welding
Less heat input reduces interpass cooling time and improves
weld cycle time
Easier puddle control than
conventional spray pulse
More tolerant of tip to work variation
Enables one-wire with one-gas weld procedures
Improve fusion and fill at toe of weld
PipePro™ Welding Programs
RMD Pro programs designed for root pass welding on deep groove
welds in all positions.
Pro-Pulse programs designed for fill and cap welding in all positions.
Process
Wire Type
Diameter
Gas Mixtures
Process Wire Type
Diameter
Gas Mixtures
RMD Pro
Steel E70
Steel E80
Stainless Steel
308 and 316
Metal Core
Chrome Steel
5 Chrome
.035/.040/.045 in
.035 in
.035/.040/.045 in
CO2, C25, C10, C15
CO2, C15
TRI-H, Ox2, C2
ProPulse™
.035/.040/.045/.052
.040/.045 in
.035/.045 in
.045 in
.045 in
C10, C15
C25
C10, C15
C15
TRI-H, TRI-A,
C2, Ox2
C10, C15
HE25
TRI3
Ox2= 98% Ar, 2% O2
HE25 = 75% Ar, 25% He
C2= 98% Ar, 2% CO2
Steel E70
Steel E80
Stainless Steel
308/309/312/316
Metal Core
Inconel 625
Duplex Stainless
.045/.052 in
.045 in
.040/.045 in
TRI-A= 81% Ar, 18% He, 1% CO2
TRI-H = 90% He, 7.5% Ar, 2.5% CO2
TRI3 = 69% Ar, 30% He, 1% CO2
3
PipePro Single and Dual Feeder Features
™
Tool less rotatable drive assembly
allows operator to rotate the drive
housing, eliminating severe bends in the
wire feed path which reduce gun liner
life. Also aids in feeding difficult wires.
PipePro DX
Dual Feeder
Dual tension control adds flexibility
for the operator to fine-tune the
pressure on the wire independently
when feeding a variety of wires.
Trigger Receptacle
Oriented in a downward position to reduce potential damage.
Trigger Hold
Reduces operator fatigue by allowing the operator to make long welds without having to hold the trigger continuously.
Posifeed Wire
Drive Assembly
• Quick-change drive rolls
• Quick-release, calibrated drive-roll pressure adjustment arm allows drive roll change without losing spring preload setting
• Floating positive drive systems provide trouble-free feeding on a variety of wires
Stored Programs
Allows the operator to select weld programs from the feeder (8 on a single feeder or 4 on each of the feeders of the dual) to
improve cycle time from root to fill and cap.
Remote Trigger Select
Allows operator to change programs (weld process and stored parameters) without returning to the feeder.
Dual Schedule
Allows the operator to switch between two sets of parameters to provide consistent penetration and improve pipe weld
quality in fixed position.
Weld Sequence Control
Provides gas preflow and postflow for welding of stainless steel and high alloy pipe materials. Improves start and stop
conditions by providing run-in, crater and burn-back controls.
Range Locks
Allows weld parameters to be adjusted within a specified range of set-point to ensure welding procedures are maintained
on the shop floor.
™
Specifications
(Subject to change without notice.)
Input
Power
Wire Feed
Speed Range
40 VDC,
10 Amps
50 –780 IPM
.023 – 1/8 in
(1.3 –19.8 MPM) (0.6 – 3.2 mm)
Wire Diameter Input Welding
Capacity
Circuit Rating
Maximum Spool
Size Capacity
100 Volts,
60 lb (27 kg)
750 Amps,
100% Duty Cycle
Dimensions
Single
Dual
H: 14 in (356 mm)
H: 14 in (356 mm)
W: 12-1/2 in (318 mm) W: 12-1/2 in (318 mm)
D: 27 in (686 mm)
D: 35 in (889 mm)
Net Weight
Single
Dual
45 lb
(20.4 kg)
87 lb
(35.5 kg)
IP Rating= IP 21
Single Feeder Control Panel
1
5
6
2
7
8
9
10
3
®
4
4
11
12
PipePro DX Model
1. Program Display
2. Program # Select
3. Weld Sequence
4. MIG/Stick(TIG)
5. Voltage/Time Select
6. Voltage/Time Display Meter
7. Wire Feed/Amperage Select
8. Wire Speed/Amperage Display Meter
9. Control Knob
10. Trigger Hold/Dual Schedule Control
11. Standard 14-Pin Receptacle
12. Jog/Purge
PipePro™ Feeder Drive Roll Kits
(Order from Miller Service Parts.)
Select drive roll kits from chart below according to type and wire size being used. Drive roll kits
include 4 drive rolls, the necessary guides and feature an anti-wear sleeve for the inlet guide.
Wire size
.035 in (0.9 mm)
.040 in (1.0 mm)
.045 in (1.1/1.2 mm)
.052 in (1.3/1.4 mm)
1/16 in (1.6 mm)
.068/.072 in (1.8 mm)
5/64 in (2.0 mm)
3/32 in (2.4 mm)
7/64 in (2.8 mm)
1/8 in (3.2 mm)
“V” groove
for hard wire
“U” groove for soft
wire or soft-shelled
cored wires
“V” knurled
for hard-shelled
cored wires
#151 026
#161 190
#151 027
#151 028
#151 029
—
—
—
—
—
#151 036
—
#151 037*
#151 038
#151 039
—
#151 040
#151 041
#151 042
#151 043
#151 052
—
#151 053
#151 054
#151 055
#151 056
#151 057
#151 058
#151 059
#151 060
Wire Guides
Wire size
.023 – .040 in (0.6 – 1.0 mm)
Inlet Guide
#150 993
Intermediate
Guide
#149 518
.045 – .052 in (1.1 – 1.4 mm)
#150 994
#149 519
1/16 – 5/64 in (1.6 – 2.0 mm)
#150 995
#149 520
1/16 – 5/64 in (2.4 – 2.8 mm)
#150 996
#149 521
1/8 in (3.2 mm)
#150 997
#149 522
*Accommodates .045 and .047 (3/64 in) wire.
PipePro 12RC SuitCase Features
™
™
Rugged Construction
Designed for use in field construction.
Remote Voltage Control
Comes standard with PipePro 12RC SuitCase.
Standard Gas Solenoid
Controls gas flow.
Flame-Retardant Case
Totally enclosed and impact resistant, this case provides strength and
durability while protecting components and weld wire from moisture,
dust and contaminants.
Drive Roll Accessibility
Easy to install wire, adjust tension and change drive rolls.
Digital Meter
Wirefeed and voltage display comes standard on SuitCase.
Portable
Lightweight feeder can be used with 150 ft cables from power source.
Available in CE or CSA version.
Specifications
(Subject to change without notice.)
Input
Power
Welding Power
Source Type
Input Welding
Circuit Rating
Wire Feed
Speed Range
40 VDC,
10 Amps
ConstantVoltage (CV)
500 Amps at
100% Duty Cycle
75 –700 IPM
(1.9 –17.7 m/min)
Drive Roll Kits
Control Panel
1
2
6
3
4
5
1.
2.
3.
4.
5.
Trigger Hold Switch
Purge Switch
Meter Display
Volt/Amp Switch
Voltage Control
7
Wire Diameter Capacity
Solid Wire: .023 – 5/64 in
(0.6 – 2.0 mm)
Flux Cored: .030 – 5/64 in
(0.8 – 2.0 mm)
Maximum Spool
Size Capacity
12 in (305 mm)
44 lb (20 kg)
Net
Weight
Dimensions
H: 16 in (406 mm)
W: 7-1/4 in (184 mm)
D: 20 in (508 mm)
25.5 lb
(11.6 kg)
(1 kit required, order from Miller Service Parts.)
Select drive roll kits from chart below according to type and wire size being used. Drive roll kits
include 2 drive rolls, necessary guides and feature an anti-wear sleeve for the inlet guide.
Wire size
“V” groove for hard wire
“U” groove for soft or
soft-shelled cored wires
“V” knurled for hardshelled cored wires
.023/.025 in (0.6 mm)
.030 in (0.8 mm)
.035 in (0.9 mm)
.040 in (1.0 mm)
.045 in (1.1/1.2 mm)
.052 in (1.3/1.4 mm)
1/16 in (1.6 mm)
.068/.072 in (1.8 mm)
5/64 in (2.0 mm)
#087 131
#079 594
#079 595
#161 189
#079 596
#079 597
#079 598
—
—
—
—
#044 749
—
#079 599
#079 600
#079 601
—
#079 602
—
—
#079 606
—
#079 607
#079 608
#079 609
#089 984
#079 610
6. Power Control
Switch
7. Wire Speed
Control
5
Bernard PipeWorx Guns Features
®
™
The PipeWorx 250-15 Gun is recommended for root pass welding, especially in fixed-position
applications where visibility is difficult. The PipeWorx 300-15 or 400-15 are recommended for fill
and cap pass welding with Flux Cored arc or pulsed MIG welding processes. In roll welding
applications where one gas and one wire are used to make the weld, the PipeWorx 400 can be used
to deposit the root pass. (A smaller nozzle diameter should be considered for improved puddle
visibility and should be used for stainless steel root pass welding without purge gas.)
Specifications
Versatility
Can be used for MIG (solid and metal cored wires), pulsed MIG,
and Flux Cored (shielded and self-shielded wires).
Ergonomics
Compact, lightweight gun with high-amperage capability reduces operator
fatigue. improving productivity.
Visibility
The combination of tapered tips and nozzles and 60˚ neck provides excellent
visibility on root passes in pipe joints.
Centerfire™ Tip
Provides “drop-in” tip with no threads providing quick changeover.
No tools are required.
(Subject to change without notice.)
Bernard® Model
100% Duty Cycle NEMA
100% Duty Cycle CE
60% Duty Cycle CE
35% Duty Cycle CE
Gas Type
Cable Length
Net Weight
PipeWorx 250-15
300 A
250 A
300 A
365 A
100% CO2
15 ft (4.6 m)
9 lb (4.1 kg)
—
210 A
250 A
300 A
80% Argon/20% CO2
350 A
320 A
370 A
470 A
CO2 Gas
15 ft (4.6 m)
10 lb (4.6 kg)
—
270 A
270 A
390 A
80% Argon/20% CO2
400 A
350 A
425 A
520 A
CO2 Gas
15 ft (4.6 m)
10 lb (4.6 kg)
—
275 A
350 A
425 A
80% Argon/20% CO2
PipeWorx 300-15
PipeWorx 400-15
Key Gun Consumables
Description
Part Number
Package Quantity
Description
Part Number
Package Quantity
.035 in Tapered Tip
TT-0351
10
Nozzle 5/8 in D
NS-5818C2
10
.040 in Tapered Tip
TT-039
10
Nozzle 5/8 in ID
N-5818C3
10
.045 in Tapered Tip
TT-045
10
Nozzle 1/2 in ID
NS-1218C
10
.035 in Tip
T-035
10
Nozzle 3/4 in ID
N-3418C
10
.040 in Tip
T-039
10
Nozzle 3/8 in ID Tapered Tip
NT-3800C
10
.045 in Tip
T-0452,3
10
Nozzle 3/8 in ID Tapered Tip
NST-3800B
10
.052 in Tip
T-052
10
Nozzle 3/8 in ID Extended Tapered Tip
NST-38XTB
1/16 in Tip
T-062
10
Diffuser
D-13
10
.035 – .045 Liner
431151,2,3
1
Diffuser
DS-11,2
10
.045 – .062 Liner
44215
1
Q Tube Assembly 60°
QT2-601,2,3
1
Q Tube Assembly 80°
QT2-80
1
0-Ring
4929
10
Standard part on PipeWorx 250-15. Standard part on PipeWorx 300-15.
Standard part on PipeWorx 400-15.
1
2
3
1
10
Genuine Miller Accessories
Dual Schedule Switches
(For PipePro DX models only.)
PipeWorx 400-15 Gun and
Cable Packages
DSS-9
#071 833
A two-position slide
switch which attaches
to the gun handle and is used to select the desired
welding condition for dual schedule purposes.
The gun trigger operates as a standard trigger.
#300 241 5 ft cable
and gun package
#300 242 25 ft cable
and gun package
#300 243 50 ft cable
and gun package
Packages include (5 ft)
interconnect and
feeder control cable,
(25 or 50 ft) feeder
control extension cable, (50 ft) work-sense lead
and PipeWorx 400-15 gun.
5 ft Cable and
Gun Package shown.
6
Individual Cables
for Typical Installations
Interconnect
Typical
and Feeder
Installation Control
Setup
Cable “Y”
Feeder
Control
Extension
Cable
WorkSense
Lead
5 ft
195 185
—
195 397
25 ft
195 185
195 395
195 397
50 ft
195 185
195 401
195 397
100 ft*
195 185
195 396
195 398
*For 150 ft add one #195 401 Feeder Control
Extension Cable.
PipePro Welding System Components
™
Wire Reel Assembly (for 60 lb coil)
#108 008 (optional, not shown)
PipePro™ DX Dual Feeder
#300 228 (shown)
PipePro™ DX Feeder
#300 227
Remote Control Receptacle
(for optional remotes)
RFCS-14 HD
#194 744
RCC-14
#151 086
RCCS-14
#043 688
RHC-14
#129 340
Polarity Control
#042 871 (optional)
Used to switch between DCEN
(straight polarity) for TIG welding
and DCEP (reverse polarity) for
MIG or Stick welding.
Coolmate™ V3 #043 009
(optional)
PipePro™ 450 RFC
#907 296
#300 380 PipePro® Ready TIG Torch Kit
150 A, air-cooled (WP-17V-25 model)
(shown)
#300 381 PipePro® Ready TIG Torch Kit
200 A, air-cooled (WP-26V-25 model)
PipeWorx® 400-15
#300 240 (shown)
#300 382 PipePro® Ready TIG Torch Kit
250 A, water-cooled (WP-20V-25 model)
PipeWorx® 300-15
#195 400 (not shown)
#300 383 PipePro® Ready TIG Torch Kit
350 A, water-cooled (WP-18V-25 model)
PipePro™ System Cart
#300 334
Dimensions: 54 H x 32 W x 53 D in
(1372 x 813 x 1346 mm). Weight
(cart only): 196 lb (89 kg).
Work Sense Lead Receptacle
50 ft Work Sense Lead #195 397
PipeWorx® 250-15
#195 399
Installation Diagrams
MIG/
FCAW
TIG
Stick
3
4
4
5
1
6
2
3
5
The illustrations
show the remote
control connected
through the wire
feeder. The wire
feeder is not
connected to the
power source
output.
1
6
Weld Cable (contact your distributor)
Work-Sense Lead
Work Cable (contact your distributor)
Interconnect and Feeder Control Cable
Feeder Control Extension Cable
(not required if feeder is on or near power source)
6. Gas Hose (contact your distributor)
1.
2.
3.
4.
5.
4
2
1
2
3
1.
2.
3.
4.
5.
6.
Weld Cable and TIG Torch (see page 7)
Work Cable (contact your distributor)
Interconnect and Feeder Control Cable
Control Extension Cable
Gas Hose (contact your distributor)
Remote with 25 ft cable (see page 8)
5
1. Weld Cable and Electrode Holder
(contact your distributor)
2. Work Cable (contact your distributor)
3. Interconnect and Feeder Control Cable
4. Control Extension Cable
5. Remote with 25 ft cable (see page 8)
Note: Size 2/0 weld cable is
recommended with PipePro 450 RFC.
7
Ordering Information
(Select a power source, wire feeder and cable package for complete system.)
Power Source and Accessories
Stock No.
Description
PipePro™ 450 RFC Inverter Power Supply
Add a Wire Feeder and a Cable and Gun Package
to create a system.
#907 296
#907 297
190 – 630 V, Auto-Line™
CE, 400 V, Auto-Line™
Qty.
PipePro™ 450 System Cart
#300 334
Cart with cylinder rack for power source, feeder, cooler, and polarity switch
PipePro™ Bench-Style Feeders
#195 407
Single feeder
PipePro™ DX Bench-Style Feeders
#300 227
#300 228
Single feeder
Dual feeder
Control Detachment Kit
Allows separation of the control module from the
wire drive assembly and base.
Feeder Cart
Spool Covers
#300 233
#300 234
#300 235
Field Kit, 10 ft (3 m). For PipePro DX single feeder only
Field Kit, 25 ft (7.6 m). For PipePro DX single feeder only
Field Kit, 25 ft (7.6 m). For PipePro DX dual feeder only
#057 607
#090 389
For single feeder or left side of dual feeder
For right side of dual feeder
Wire Reel Assembly
#108 008
Reel Covers
#058 256
#091 668
For 60 lb (27 kg) coil (Reel and Spool Covers cannot be installed if the
wire drive assembly is in a rotated position.)
For single feeder or left side of dual feeder. For 60 lb (27 kg) coil
For right side of dual feeder. For 60 lb (27 kg) coil
See page 5
DSS-9 (PipePro DX models only)
Bench-Style Wire Feeder and Accessories
#142 382
Drive Roll Kit (Required)
Dual Schedule Switches
#071 833
SuitCase-Style Wire Feeder and Accessories
PipePro™ 12RC SuitCase™ Feeder
#195 392
Flowmeter Kit
#195 217
Drive Roll Kit (Required)
See page 5
PipeWorx 400-15 Gun and Cable Packages
Select a Package OR Select Individual Cables (see page 6)
Includes interconnect and feeder control cable (5 ft),
feeder control extension cables, work-sense lead and
PipeWorx gun. Does NOT include weld cable, work cable,
work clamp, and gas regulator/flowmeter.
#300 241
#300 242
#300 243
5 ft (1.5 m) cable and gun package
25 ft (7.6 m) cable and gun package
50 ft (15.2 m) cable and gun package
Interconnect and Feeder Control Cable
#195 185
5 ft (1.5 m) (one required per system)
Feeder Control Extension Cable
(Not required if feeder is on or near power source.)
#195 395
#195 401
#195 396
25 ft (7.6 m)
50 ft (15.2 m)
100 ft (30.5 m)
Work-Sense Lead
#195 397
#195 398
50 ft (15.2 m)
150 ft (45.7 m)
#195 399
#195 400
#300 240
250-15 Gun. See page 6 for consumables
300-15 Gun. See page 6 for consumables
400-15 Gun. See page 6 for consumables
RFCS-14 HD
RCC-14
RCCS-14
RHC-14
#194 744
#151 086
#043 688
#129 340
Heavy-duty foot control
Side-to-side fingertip control
Up-and-down fingertip control
Hand current control and contactor
Remote Control Adapter
#300 248
For PipePro™ 12RC Suitcase™ and #195 407 Single Feeder.
Connects remote control cable to feeder control cable
Individual Cables for Typical Installations
Individual MIG/FCAW Guns and Consumables
Bernard® PipeWorx Guns
Accessories for TIG and Stick
Polarity Control
#042 871
Switches between DCEP (reverse polarity) and DCEN (straight polarity)
Coolmate® V3
#043 009
115 VAC
Weldcraft® TIG Torches
(see page 7)
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement