Miller Big Blue 400X Pro pdf - Welding Industries of Australia

Miller Big Blue 400X Pro pdf - Welding Industries of Australia
ENGINE DRIVEN
Big Blue® 400X Pro
Part No: MR907630-1 [CAT Diesel Engine]
SUPERIOR ARC
PERFORMANCE
Four pre-set DIG
settings (Stick).
Hot Start™ (Stick).
Lift-Arc™ TIG with
Auto-Stop™ and Crater-out.
MIG/FCAW arc
performance.
AUTO REMOTE SENSE™
Detects if a remote control
is plugged into the 14-pin
receptacle and eliminates
confusion of a remote/
panel switch.
QUIET OPERATION
Improves work site
communication.
SIMPLE-TO-SET
CONTROLS
CATERPILLAR HEAVY
DUTY LOW-SPEED
INDUSTRIAL ENGINE
Designed to operate for
10,000 hours before
the first basic overhaul.
METER MAINTENANCE
DISPLAYS
Fuel gauge.
Hour meter function.
Oil change interval.
High coolant temperature
low oil pressure shut downs.
Low fuel shutdown engine shuts down before
system runs out of fuel,
making restarts easy.
AUXILIARY POWER*
2 X 15 Amp Sockets.
1 x 32 Amp Socket.
RCD.
No elaborate procedure, just
select process and weld!
VRD TO CAT C AS1674.2
THE VAULT
3 YEAR WARRANTY
Ultimate control board
reliability. Solid-state
control technology, housed
in a sealed vault. The
vault's sealed connections
are made through watertight
plugs that make these
components impenetrable
to dust and moisture.
APPLICATIONS
PROCESSES
Mechanical Contractors
Structural Steelwork
Fabrication
Maintenance
Repair
Rental
Construction
Stick (SMAW)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)
Rated: 4.8mm (3/16 in)
Carbons, Capable: 6.4mm
(1/4 in) Carbons
Air Plasma Cutting and
Gouging with Optional
Spectrum Models
MODEL OPTIONS
PART NO
With VRD, Emergency Stop, Double Pol
Battery Isolator & Lockout Device
MR907630-2
With VRD, Roll Frame & Spill Tray Assembly,
Emergency Stop, Double Pol Battery
Isolator & Lockout Device
MR907630-3
Welder/generator is
warranted by Miller for
3 years, parts and labour.
For details, refer to
Miller’s True Blue warranty
statement. Engine is
warranted separately by
engine manufacturer.
*Generator auxiliary power is 60Hz, and intended for operating equipment associated with
welding, such as angle grinders, drills and floodlights. Some Australian 50Hz equipment
incorporating induction motors, such as pumps, fans, air compressors, refrigeration or
air-conditioners, may not operate correctly and could be damaged. Refer to appliance
supplier or manufacturer to confirm suitability.
WELDING
MODE
AMP/VOLT
RANGE
RATED
OUTPUT
GENERATOR
POWER
DIMENSIONS
(MM)
WEIGHT*
(WITHOUT FUEL)
CC/DC
20 - 400 A
CV/DC
14 - 40 V
300A at 32VDC, 100% Duty Cycle
350A at 27VDC, 100% Duty Cycle
400A at 24VDC, 100% Duty Cycle
Peak:
12,000 Watts
Continuous:
10,000 Watts
42 A, 240 VAC,
60 Hz
H: 813
W: 667
D: 1422
Net: 458kg
Shipping: 481kg
*Additional 37kg
when fuel tank
is full
welding.com.au 1300 300 884
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement