Sanyo SCP-2700 User manual

Sanyo SCP-2700 User manual
User Guide
SCP-2700 by SANYO
SANYO is a registered trademark of SANYO Electric Co., Ltd. and used under license.
All other trademarks are the property of their respective owners.
Table of Contents
Tip
Looking for something? If you don’t see it in the
headings listed here, try the Index on page 123.
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . .14
Setting the Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . .14
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . .15
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Simple Data Exchange . . . . . . . . . . . . . . . . . . . . . . . . .27
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .i
Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . .i
Section 1: Getting Started . . . . . . . . . . . . . . .1
2B. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . .2
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . .2
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . .3
TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Using the Hearing Aid Device Compatibility Function . . . .40
Section 2: Your Phone . . . . . . . . . . . . . . . . . . .5
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . .41
2A. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . . .6
Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2C. History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . .8
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . .11
History Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . . . .11
History Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Navigating Through the Menus . . . . . . . . . . . . . . . . . . .13
History Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . .49
Making a Call From History . . . . . . . . . . . . . . . . . . . . . .49
2E. Calendar and Tools . . . . . . . . . . . . . . . . . . . .59
Saving a Phone Number From History . . . . . . . . . . . . . .49
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Making a New Group Entry From History . . . . . . . . . . . . .50
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Deleting History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
2D. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . .51
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Displaying Contacts Details . . . . . . . . . . . . . . . . . . . . . .51
2F. Voice Services . . . . . . . . . . . . . . . . . . . . . . . .66
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . .52
Automatic Speech Recognition (ASR) . . . . . . . . . . . . . . .66
Creating a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Voice and Call Memos . . . . . . . . . . . . . . . . . . . . . . . . .69
Editing Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
2G. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . .54
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Viewing History From Contacts . . . . . . . . . . . . . . . . . . .54
Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Using Contacts Information in Other Applications . . . . . .54
Sending Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . .55
Viewing Picture Messages . . . . . . . . . . . . . . . . . . . . . .79
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . .55
Managing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . .56
2H. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Assigning a Picture to a Contacts Entry . . . . . . . . . . . . . .57
About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Printing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . .57
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . .82
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . .57
Making Your Phone Discoverable . . . . . . . . . . . . . . . . . .82
Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Downloading Content . . . . . . . . . . . . . . . . . . . . . . . . .106
Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . .84
Browser Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . .86
Section 4: Safety and Warranty
Information . . . . . . . . . . . . . . . . . . . . . . . .111
Trusted List Options . . . . . . . . . . . . . . . . . . . . . . . . . . .86
4A. Important Safety Information . . . . . . . . . . .112
Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . .87
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . .112
Printing Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . .87
Maintaining Safe Use of and Access to Your Phone . . . .113
Section 3: Wireless Service . . . . . . . . . . . . .89
Using Your Phone With a Hearing Aid Device . . . . . . . . .114
3A. Wireless Service: The Basics . . . . . . . . . . . .90
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . .115
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Radio Frequency (RF) Energy . . . . . . . . . . . . . . . . . . . .117
Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . . . . . . .93
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
User Guide Proprietary Notice . . . . . . . . . . . . . . . . . . .119
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
4B. Manufacturer’s Warranty . . . . . . . . . . . . . .120
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . .97
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . .120
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
3B. Web and Data Services . . . . . . . . . . . . . . . .102
Getting Started With Data Services . . . . . . . . . . . . . . .102
Accessing Messages . . . . . . . . . . . . . . . . . . . . . . . . .105
Introduction
Your Phone’s Menu
This User Guide introduces you to wireless service and all the
features of your new phone. It’s divided into four sections:
⽧ Section 1: Getting Started
⽧ Section 2: Your Phone
⽧ Section 3: Wireless Service
⽧ Section 4: Safety and Warranty Information
The following table outlines your phone’s main menu structure.
For more information about using your phone’s menus, see
“Navigating Through the Menus” on page 13.
WARNING
Please refer to the Important Safety
Information section on page 112 to learn
about information that will help you safely use
your phone. Failure to read and follow the
Important Safety Information in this phone guide
may result in serious bodily injury, death, or
property damage.
1: Missed Alerts
2: History
3: Bluetooth
1: Handsfree Pairing
2: Send Contact
3: Print Picture
4: Add to Trusted
5: Trusted List
6: Send Biz Card
7: More...
i
4: Web
7: Photos
1: Camera
5: Messages
Press the right softkey for the following options:
1: Voicemail
1: Call Voicemail
3: Reset Indicator
2: Details
2: Send Message
1:Text Message
2: Picture Msg
3: Text Messages
2: Picture Msg
1: In Phone
5: Settings
6: Contacts
2: Online Albums
4: Settings & Info
2: Callback Number
4: Preset Messages
1: Location
3: Slideshow Interval
5: Help
8: My Stuff
1: Games
2: Ringers
3: Screen Savers
4: Applications
ii
2: Zoom
4: Fun Tools
6: Camera Settings
8: Key Guidance
3: My Albums
4: Picture Msg
1: Notification
3: Signature
1: Picture Mode
3: Self-Timer
5: Image Controls
7: Review Media
9: User Settings
2: Status Bar
4:Account Info
5: (Dynamic – if applicable)
6: (Others – if applicable)
9: Shopping
#: Settings
1: Display
1: Main Screen
0: Tools
1: Screensaver
3: Backlight
5: Foreground
1: Alarm Clock
2: Assigned Media
3: Activate/Self-Service*
* availability dependent on your service provider
2:Animation
4: Input Font
6: Sleep Mode
2: Contrast
3: Font Size
1: Main Screen
4: Calculator
4: Keypad Light
5: Countdown
5: Language
6: Stopwatch
7: Update Firmware*
* availability dependent on your service provider
1: English
2: Español
6: Power Save Mode
7: Return to Idle
8: Voice Memo
1: Record
*: Calendar
2: List
1:Automatically
2: End Key
9: World Clock
iii
2: Sounds
3: Bluetooth
1: Volume
1: Ringer
3: Headset
5:Applications
7:Advanced...
1: On/Off
2: Earpiece
4: Speakerphone
6: Start Up/Power Off
2: Messages
4: Power On
6: Schedule
3: Alerts
1: Beep Each Minute
3: Connect
5: Messages
2: Out of Service
4: Signal Fade/Call Drop
2:Tone Volume
4: Messages
1: Notification
1: Msgs and Icon
1: My Phone Number
3: None
4: Preset Messages
6: Vibrate Type
iv
6: Voice Priority
3: Signature
5: Voice Guide
1: Incoming Calls
3:Alarm
5: Trusted List
2: Icon Only
2: Callback Number
4: Keytones
1:Tone Length
3:Tone Type
3: Device Name
4: Device Info
2: Ringer Type
1: Incoming Calls
3:Alarm
5: Power Off
2: Visibility
2: Messages
4: Schedule
2: Other
5: Text Entry
1:Auto-Capital
3: My Words
5: Default Input Mode
7:Auto-Substitution
9: Help
5: Contacts
2:Auto-Space
4: Predictive Settings
6:Add Word
8:Auto-Complete
2: Icon Glossary
4:Advanced
7: More...
1:Turbo Button
2: Ringer Sound
0: Restrict and Lock
1:Voice
3: Camera/Pictures
2:Web
4: Lock My Phone
*: Roaming
3: Browser
2: Delete Web Cache
4: Edit Home Page
1: Set Mode
3: Data Roaming
2: Call Guard
#: Security
4: Call Setup
1: Call Answer
3:Abbreviated Dialing
7: Headset Mode
9: Power On to Alert
2: Input Font
4:Vibrate Type
2: Airplane Mode
1: Favorites
3: Delete Web Cookies
6: Web
8: Location
1: Accessibility
1:TTY
3: Font Size
5: Hearing Aid
2: Hide Secret/Show Secret
1: Enable/Disable Web
2: Net Guard
3: Update Profile (availability depends on your service provider)
6: Phone Info
1: Phone#/User ID
3:Version
1: Speed Numbers
3: My Name Card
2:Auto-Answer
4: Contacts Match
1: Lock My Phone
3: Special Numbers
5: Delete/Reset
2: Change Lock Code
4: Edit Contacts List
v
: Navigation Keys
1: Left Navigation(Calendar) 2: Right Navigation(Web)
3: Up Navigation(Messages) 4: Down Navigation(My Stuff)
: Auto Key Guard
In Use Menu
Press OPTIONS (right softkey) to display the following
options:
1: Save/Contact Details
3: 3-Way Call
5: Voice Memo
vi
2: Main Menu
4: Contacts
6: Phone Info
Section 1
Getting Started
1A. Setting Up Service
⽧
⽧
⽧
⽧
Setting Up Your Phone (page 2)
Activating Your Phone (page 3)
Setting Up Your Voicemail (page 3)
Getting Help (page 4)
Setting Up Your Phone
1. Install the battery.
䡲 Insert the battery into the opening on the back of the
phone, making sure the connectors align ( ), and
gently press it down ( ).
䡲 Replace the battery cover and press it down until the
latch snaps into place ( and ).
2
1A. Setting Up Service
2. Press and hold
to turn the phone on.
䡲 If your phone is activated, it will turn on, search for
service, and enter standby mode.
䡲 If your phone is not yet activated, see “Activating Your
Phone” on page 3 for more information.
3. Make your first call.
䡲 Use your keyboard to enter a phone number.
䡲 Press
Note
.
Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call.You should fully charge your
battery as soon as possible. See “Charging the Battery”
on page 13 for details.
䢇
䢇
䢇
If you purchased your phone at a store, your phone
should be activated and ready to use.
If you received your phone in the mail, your phone is
designed to activate automatically when you first turn it on.
To confirm your activation, make a phone call.
If you received your phone in the mail and you are
switching numbers from a previous phone to the new
phone, you need to contact your service provider to activate
the number on your new phone.When you have finished,
make a phone call to confirm your activation.
Tip
Do not press END while the phone is being activated.
Pressing END cancels the activation process.
Note
If you are having difficulty with activation, contact your
service provider.
Setting Up Your Voicemail
Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off.You should
set up your voicemail and personal greeting as soon as your
phone is activated.
1. From standby mode, press and hold .
2. Follow the system prompts to:
䡲 Create your passcode.
䡲 Record your name announcement.
䡲 Record your greeting.
Note
Voicemail Passcode
It is strongly recommended that you create a passcode
when setting up your voicemail to protect against
unauthorized access.Without a passcode, anyone who
has access to your handset is able to access your
voicemail messages.
For more information about using your voicemail, see
“Voicemail” on page 90.
1A. Setting Up Service
3
Setting Up Service
Activating Your Phone
Getting Help
Directory Assistance
Call Directory Assistance from your phone and you’ll have
access to a variety of services and information including
residential, business, and government listings.There is a percall charge to use Directory Assistance, and you will be billed
for airtime.
To call Directory Assistance:
䊳
Press
.
Operator Services
Operator Services provide assistance when placing collect
calls or when placing calls billed to a local telephone calling
card or third party.
To access Operator Services:
䊳
Press
.
For more information, please contact your wireless service
provider.
4
1A. Setting Up Service
Section 2
Your Phone
Your Phone
2A. Phone Basics
1. Earpiece
2. Display Screen
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
Your Phone (page 6)
Viewing the Display Screen (page 8)
Turning Your Phone On and Off (page 11)
Battery and Charger (page 11)
Navigating Through the Menus (page 13)
Displaying Your Phone Number (page 14)
Setting the Key Guard (page 14)
Making and Answering Calls (page 15)
Entering Text (page 23)
Simple Data Exchange (page 27)
12. Softkeys
3. MENU/OK Key
4. TALK Key
11. END/POWER Key
5. TEXT Key
10. BACK Key
6. Navigation Key
9. QWERTY Keyboard
7. Microphone
8. Internal Antenna
13. Camera Lens
14. Speaker
15. Volume Button
16. Camera Button
17. Battery Release
Latch
18. Micro-USB
Connector
19. Headset Jack
6
2A. Phone Basics
9. QWERTY Keyboard lets you enter numbers, letters, and
1. Earpiece lets you hear the caller and automated prompts.
2. Display Screen displays all the information needed to
10.
operate your phone, such as the call status, the Contacts
list, the date and time, and the signal and battery strength.
3. MENU/OK Key lets you access the phone’s menus and
selects the highlighted choice when navigating through a
menu.
4. TALK Key allows you to place or receive calls, answer Call
11.
12.
Waiting, use Three-Way Calling, or activate Automatic
Speech Recognition (ASR).
5. TEXT Key lets you access the text message entry screen.
6. Navigation Key scrolls through the phone’s menu
options and acts as a shortcut key from standby mode.
These keys can be reassigned to create customized
shortcuts. See “Navigation Key Shortcuts” on page 41.
7. Microphone allows other callers to hear you clearly when
you are speaking to them.
8. Internal Antenna facilitates reception and transmission.
To maximize performance, do not obstruct the internal
antenna while communicating. (See page 15.)
13.
characters, and perform functions with single key press or
combined keypresses.
BACK Key deletes characters from the display in text
input mode.When in a menu, pressing it returns you to the
previous menu.This key also allows you to return to the
previous screen in a data session.
END/POWER Key lets you turn the phone on or off, end a
call, or cancel your input and return to standby mode.
Softkeys let you select softkey actions or menu items
corresponding to the bottom left and right lines on the
screen.
Camera Lens, as part of the built-in camera, lets you take
pictures.
14. Speaker lets you hear the different ringers and sounds.
You can mute the ringer when receiving incoming calls by
pressing
or side buttons.The speaker also lets you
hear the caller’s voice in speakerphone mode.
15. Volume Button allows you to adjust the ringer volume in
standby mode or the voice volume during a call.The
volume button can also be used to scroll up or down to
navigate through the different menu options.
2A. Phone Basics
7
Phone
Phone Basics
Basics
Key Functions
16. Camera Button lets you open the Photos menu. Press
and hold to activate the camera mode and take pictures.
17. Battery Release Latch lets you open the battery cover to
replace the battery.
18. Micro-USB Connector allows you to connect a
compatible charging cable or USB data cable (not
included). CAUTION! Inserting an accessory into the
incorrect jack may damage the phone.
Viewing the Display Screen
The status bar at the top of your phone’s display screen
provides information about your phone’s status and options.
These tables identify the symbols you’ll see on your phone’s
display screen:
Tip
To view a list of your phone’s icons and descriptions,
press Menu/OK > Settings > Phone Info >
Icon Glossary.
19. Headset Jack allows you to plug in an optional headset
for convenient, hands-free conversations. CAUTION!
Inserting an accessory into the incorrect jack may damage
the phone.
Service Icons
Signal Strength – Your phone’s current signal strength.
(More bars = stronger signal.)
No Service –Your phone cannot find a usable signal.
Roaming – Your phone is “roaming” off the home network.
Data Service – 1xRTT data service is available.When
active, the icon is animated.
Data Service Dormant – Data service is currently dormant.
Data Service Unavailable – Data Service is currently
unavailable.
8
2A. Phone Basics
Status Icons
Battery – Your phone’s current battery charge level. (The
icon to the left shows the battery is fully charged.) The icon
is animated while the battery is charging.
Status Icons
1 Beep – A beep sounds when you receive an incoming call,
a message, etc.
1 Beep and Vibrate – 1 Beep and vibrate are set.
Ringer and Vibrate – The volume level is set to between 1
and 8 and vibrate is turned on.
Location Off – Your phone’s location feature is off.Your
location is available only for 911.
Speaker Mode – Your phone is in speaker mode.
Phone
Phone Basics
Basics
Location On – Your phone’s location feature is on and
available for location-based services such as GPS
Navigation.
SilenceAll – Your phone’s sound is turned off.
VibrateAll – Your phone’s sound is turned off but vibrate is
turned on.
Ringer Off – Your phone’s ringer is turned off.
2A. Phone Basics
9
Messaging Icons
Multiple Messages – You have two or more different types
of new messages waiting.
Picture Messages – You have new picture message(s)
waiting.
Voice Call Icons
Missed Call – You have missed voice calls.
Bluetooth Device – A call is in progress using a Bluetooth
device.
Text Messages – You have new text message(s) waiting.
Headset – A call is in progress using an optional wired
headset.
Voicemail – You have new voicemail message(s) waiting.
Car Kit – A call is in progress using an optional car kit
device.
Urgent Messages – You have new urgent message(s)
waiting.
Others
Bluetooth Icons
Visible – Your phone is discoverable by (visible to) other
Bluetooth devices.
Connected – Your phone is connected to a Bluetooth
device.
Enable – Your phone’s Bluetooth feature is enabled.
* Above icons will blink while your phone is communicating with a Bluetooth device.
10
2A. Phone Basics
TTY – Your phone is connected to a TTY device.
Alarm Clock – Alarm clock or countdown is set.
Notification – You have events, call reminders, alarm clock,
or countdown notification.
HAC Enabled – Your phone’s HAC setting is enabled.
Turning Your Phone On and Off
Your screen remains blank while your phone is off unless the
battery is charging.
Turning Your Phone On
Battery and Charger
Press and hold
.
Once your phone is on and finds a signal, it automatically
enters standby mode – the phone’s idle state.At this point, you
are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention.You can also initiate a
search for service by pressing any key except numbered keys.
Tip
The Power Save feature conserves your battery power
when you are in an area where there is no signal.
Turning Your Phone Off
䊳
Press and hold for two seconds until you see the
powering-down animation on the display screen.
WARNING
Use only Kyocera-approved batteries and
chargers with your phone.The failure to use a
Kyocera-approved battery and charger may
increase the risk that your phone will overheat,
catch fire, or explode, resulting in serious bodily
injury, death, or property damage.
Phone
Phone Basics
Basics
䊳
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained.
The battery provides up to 4.8 hours of continuous digital talk
time.
For a quick check of your battery level, glance at the battery
charge indicator located in the upper-right corner of your
phone’s display screen.When there are approximately five
minutes of talk time left, the battery icon ( ) turns red and
the phone sounds a warning tone.
2A. Phone Basics
11
After an additional five minutes or so, the phone sounds a
warning tone three times and then turns off.
Note
Tip
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce the
battery’s talk and standby times.
2. Slide the battery release latch in the direction of the arrow
Watch your phone’s battery level indicator and charge
the battery before it runs out of power.
3. Lift the battery up and remove it from the phone ( ).
1. Insert the battery into the opening on the back of the
phone, making sure the connectors align (
press it down ( ).
), and gently
2. Replace the battery cover and press it down until the latch
snaps into place (
and
2A. Phone Basics
(
), pull the battery cover up, and remove it (
WARNING
Installing the Battery
12
Removing the Battery
).
Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
).
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your phone automatically turns
off, and you will lose any information you were just working on.
Always use a Kyocera-approved desktop charger, travel
charger, or vehicle power adapter to charge your battery.
1. Plug the phone charger into a wall outlet.
2. Plug the other end of the phone charger into the microUSB connector located on the lower left side of your
phone.
With the Kyocera-approved Li-Ion battery, you can recharge
the battery before it becomes completely run down.
Navigating Through the Menus
The navigation key on your phone lets you scroll through
menus quickly and easily. Many menus feature a scroll bar on
the right to help you keep track of your position in the menu.
To navigate through a menu, press the navigation key up or
down.
For a diagram of your phone’s menu, please see “Your Phone’s
Menu” on page i.
Phone
Phone Basics
Basics
Charging the Battery
Selecting Menu Items
As you navigate through the menu, menu options are
highlighted. Select any option by highlighting it and pressing
(the MENU/OK key). If the option is numbered, you can
select it by pressing the corresponding number on the phone’s
keyboard.
2A. Phone Basics
13
Displaying Your Phone Number
For example, to open the alarm setting screen:
1. Press
to access the main menu.
2. Select Tools by highlighting it and pressing
.
3. Select Alarm Clock by highlighting it and
pressing
.
For the purposes of this guide, the above steps condense into:
䊳
Press
> Tools > Alarm Clock.
Backing Up Within a Menu
To go to the previous menu:
䊳
Press
.
To return to standby mode:
䊳
14
Press
.
2A. Phone Basics
䊳
Press
> Settings > Phone Info > Phone#/User ID.
Your phone number and other information about your phone
and account will be displayed.
Setting the Key Guard
You can lock side buttons and the QWERTY keyboard to avoid
accidentally pressing a key or a button.
To lock keys from standby mode:
䊳 Press and hold
.
To unlock keys:
䊳 Press
, and then press
.
Keys will be automatically unlocked when you:
䡲 Receive a call. Press
to answer.
䡲 Receive messages, scheduled events, alarms, or
countdown notifications.
Note
If you do not operate your phone when you receive a call
or notifications, keys will be locked again automatically.
Making and Answering Calls
If you select Icon Only under MESSAGES (left softkey) >
Settings > Notification, notifications will not unlock
the keys. (See “Setting Message Notification” on
page 37.)
Holding Your Phone
You can dial the emergency numbers even if keys are locked.
To maximize performance, do not obstruct the internal antenna
area.
Correct
Incorrect
Phone
Phone Basics
Basics
Auto Key Guard
Auto Key Guard will lock keys automatically after the time set in
Sleep Mode elapses. If Sleep Mode is set to Off, keys will be
locked after one minute. (See “Sleep Mode” on page 36.)
To disable the Auto Key Guard feature:
䊳 Press
> Settings > More... > Auto Key Guard >
Off.
Internal Antenna
2A. Phone Basics
15
Making Calls
Dialing Options
1. Make sure your phone is on.
2. Enter a phone number from standby mode. If you make a
When you enter numbers in standby mode, you can see
available dialing options by pressing OPTIONS (right softkey).
䢇 Abbreviated Dialing to place calls using the abbreviated
dialing feature. (See “Abbreviated Dialing” on page 22.)
䢇 Save to save a phone number in your Contacts. (See “Saving
a Phone Number” on page 20.)
䢇
Hard Pause to insert a hard pause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 20.)
䢇
2-Sec. Pause to insert a two-second pause. (See
“Dialing and Saving Phone Numbers With Pauses” on
page 20.)
mistake while dialing, press
to erase the numbers.
3. Press
. (To make a call when you are roaming and Call
Guard is enabled, see “Call Guard” on page 100.)
4. Press
Tip
when you are finished.
To redial your last outgoing call, press TALK, highlight
the call, and then press TALK again.
When making calls off the home network, always dial
using 11 digits (1 + area code + phone number).
You can also place calls from your phone by speed dialing
(page 22), by using Automatic Speech Recognition (ASR, page
66), and by using your History listings (page 49).
16
2A. Phone Basics
Tip
You can also send a text message or picture message
when the left softkey displays SEND MESSAGE.
Note
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press
to answer an incoming call. (Depending on your
settings, you may also answer incoming calls by pressing
other keys. See “Call Answer Mode” on page 41.)
Your phone notifies you of incoming calls in the following ways:
The phone rings or vibrates.
䢇 The backlight illuminates.
䢇 The screen displays an incoming call message.
䢇
䢇
to ignore a call.
SILENCE (left softkey) to mute the ringer and vibration.
Tip
Pressing the BACK key or any of the side buttons can
also mute the ringer and vibration.
Note
When your phone is off, all calls go directly to voicemail.
䢇
If the incoming call is from a number stored in your Contacts,
the entry’s name is displayed.The caller’s phone number may
also be displayed, if available.
When receiving a call, press one of the following keys for other
actions:
䢇
to answer a call in speaker mode.
䢇 IGNORE WITH TEXT (right softkey) to ignore the call and
send a text message to the caller.
IGNORE WITH TEXT may not be displayed when calls
are from entries identified as No Caller ID, Private, or
Unavailable ID .
Phone
Phone Basics
Basics
Answering Calls
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your roaming
charges when making or receiving calls while outside the
home network. Please see “Roaming” on page 98 for more
information about roaming.
䊳
Press , and then press to answer the call. (See “Call
Guard” on page 100 for additional information.)
Ending a Call
䊳
Press
.
2A. Phone Basics
17
Missed Call Notification
䢇
When an incoming call is not answered, your screen displays
the Missed Call log. Press to dial the phone number.
When there are two or more missed notifications,a MissedAlerts
list is displayed.Highlight the entry and press to see details.To
dial the phone number,press .
The keypad will continue to flash up to 24 hours unless you
respond to the notifications, such as an incoming call,
message notifications, or alarm clock.
Unlock My Phone to unlock your phone (appears if the phone
is locked).
Tip
Press MY PHONE# (left softkey) to display your phone
number during an emergency call.
Exiting Emergency Mode
If you end the emergency call by pressing , your phone
enters the Emergency mode. Press OPTIONS (right softkey) >
Exit Emergency to exit Emergency mode.
To display a Missed Alerts entry from standby mode:
1. Press > Missed Alerts.
2. Highlight the entry you wish to view and press
Enhanced 911 (E911) Information
.
Calling Emergency Numbers
You can always place calls to 911 (dial
phone is locked or your account is restricted.
), even if your
During an emergency call, press OPTIONS (right softkey) to
display your options. Highlight an option and press .
䢇 Phone Info to display your Phone Info menu (appears when
the phone is unlocked).
18
2A. Phone Basics
This phone features an embedded Global Positioning System
(GPS) chip necessary for utilizing E911 emergency location
services where available.
When you place an emergency 911 call, the GPS feature of
your phone seeks information to calculate your approximate
location. Depending on several variables, including availability
and access to satellite signals, it may take up to 30 seconds or
more to determine and report your approximate location.
Always report your location to the 911
operator when placing an emergency call.
Some designated emergency call takers, known
as Public Safety Answering Points (PSAPs) may
not be equipped to receive GPS location
information from your phone.
In-Call Options
Pressing OPTIONS (right softkey) during a call displays a list of
available in-call features.
䢇 Save to save the current call’s phone number in
your Contacts.
䢇 Contact Details to display information about the caller
stored in your Contacts.
䢇 Main Menu to display the phone’s main menu.
䢇 3-Way Call to open a call with two other parties.
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
䢇 Phone Info to access the Phone Info menu.
䢇 Transfer Audio to switch the call to an external device.
Note
You can return to the in-call display from the main
menu, Phone Info screen, etc., by pressing TALK.
䊳
Press the volume button up or down to adjust the receiver
volume.
䊳
Press MUTE (left softkey) to mute the microphone.
䊳
Press
WARNING
to turn speaker on. Press again to turn off.
Because of higher volume levels, do not place the
phone near your ear during speakerphone use.
Phone
Phone Basics
Basics
IMPORTANT
End-of-Call Options
After you have finished your call, the phone will display the
Recent History. From the Recent History, you can view the time
of the call, the phone number (if available), the entry name (if
the number is already in your Contacts), and the duration of the
call.
䊳
Press OPTIONS (right softkey) to display the Recent
History options. (See “History Menu Options” on page 49
for details.)
2A. Phone Basics
19
䊳
Press SEND MESSAGE (left softkey) to send a text or
picture message.
Saving a Phone Number
Finding a Phone Number
You can search Contacts entries for phone numbers that
contain a specific string of numbers.
Your phone can store up to 600 Contacts entries and each
entry can contain up to seven phone numbers. (See “Contacts”
on page 51.)
1. Enter three or more digits of the number in standby mode.
1. From standby mode, enter a phone number and press
2. All Contacts entries matching the entered numbers will be
OPTIONS (right softkey) > Save.
2. Select New Entry or Existing Entry.
3. If New Entry was selected, select a number type, and
then enter the new entry name.
– or –
If Existing Entry was selected, select an existing entry to
which you want to save the number, and then highlight a
number type and press .
4. Press DONE (left softkey) to save the entry.
20
2A. Phone Basics
(The more numbers you enter, the more specific the
search becomes.)
displayed. Highlight an entry and press
number.
to dial the
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing
numbers.
There are two types of pauses available on your phone:
䢇 Hard Pause sends the next set of numbers when you
press .
䢇 2-Sec. Pause automatically sends the next set of numbers
after two seconds.
You can have multiple pauses in a phone number and
combine two-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or
2-Sec. Pause.
3. Enter additional numbers.
4. Press OPTIONS (right softkey) > Save to save the number
in your Contacts.
– or –
Press
5. Press
selected.
to dial the number.
to send the additional number if Hard Pause was
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to call.
3. Press to dial the entry’s default phone number.
– or –
Press the navigation key left or right to show another
number for the entry and press .
Plus (+) Code Dialing
Phone
Phone Basics
Basics
Note
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press to display “+” on your phone screen.
2. Dial the country code and phone number you’re calling,
and press .The access code for international dialing
will automatically be dialed, followed by the country code
and phone number.
2A. Phone Basics
21
Speed Dialing
Abbreviated Dialing
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
Abbreviated Dialing is similar to speed dialing.You can use
either of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your
Contacts by entering only the last three to six digits of the
number.
䢇 Prepend – Prepend the first five or six digits (for example,
the area code and prefix) to any four or five digits you enter.
You must assign a speed dial number to the existing phone
number beforehand. See “Assigning Speed Dial Numbers” on
page 55.
To use speed dial for locations 2-9:
䊳
From standby mode, press and hold the appropriate key
for approximately two seconds.
To use speed dial for locations 10-99:
䊳
From standby mode, press appropriate keys, and then
press .
The display confirms that the number has been dialed when it
shows “Connecting...”
Note
22
Speed dialing may not be available when you are
roaming; when you are roaming off the home network,
you must always dial using eleven digits (1+ area code
+ number).
2A. Phone Basics
To activate the Contacts Match feature:
1. Press > Settings > More... > Call Setup.
2. Select Contacts Match > On.
To activate the Prepend feature:
1. Press
> Settings > More... > Call Setup >
Abbreviated Dialing.
2. Select Prepend > On.
3. Enter a five- or six-digit number and press
.
To place a call using Abbreviated Dialing:
Entering Text
1. Enter the last three to six digits of a Contacts entry’s phone
Note
2. Press
Entering Text With the QWERTY Keyboard
Your phone features a QWERTY keyboard, specifically
designed for easy and comfortable text entry.The easiest way
to enter text on the QWERTY keyboard is to use your thumbs.
QWERTY Keyboard
Contacts Match will not retrieve numbers if you enter
911 or reserved three-digit service numbers such as
411 or 711.
Numbered Keys
Symbol Key
to call the displayed number.
If there are two or more matched numbers in your
Contacts, a list is displayed. Highlight the name or the
phone number you want to call, and then press to
place a call.
Phone
Phone Basics
Basics
number to use the Contacts Match feature.
– or –
Enter the last four or five digits of the number to use the
Prepend feature.
Shift Key
Enter Key
Function Key
Speaker Key
Space Key Emoticons Key
䊳
Press an alphabet key with
pressed to enter a
character located at the upper right of the key. For
example, press
and to enter “+.”
2A. Phone Basics
23
Selecting a Text Input Mode
Your phone provides convenient ways to enter words or
symbols whenever you are prompted to enter text.
Predictive Text Mode
Predictive Text suggests words based on the letters already
entered.
To turn Predictive Text on or off:
From the message entry screen:
䊳 Press OPTIONS (right softkey) > Text Mode >
Predictive Text > On or Off.
From other text entry screens, such as Contacts or Signature:
䊳 Press and hold TEXT MODE (right softkey) to turn
Predictive Text on. Press and hold again to turn Predictive
Text off.
Other Text Input Modes
䊳
䊳
䊳
24
Press to switch to SYMBOL mode. Press again to
return to the previous input mode.
Press
to switch to Emoticons mode. Press again to
return to the previous input mode.
Press TEXT MODE (right softkey) > Web Shortcuts to
enter Web shortcuts (for example, www., http://, or .com).
2A. Phone Basics
Note
To display the Web Shortcuts menu on the message
entry screen,press OPTIONS (right softkey) >
Text Mode > Web Shortcuts.
Capitalization Options
You can capitalize letters on your phone’s QWERTY keyboard
the same way you would on a computer keyboard. Hold down
while entering a letter to capitalize it.
You can also press to select one of the following options:
䢇 Abc to capitalize only the first letter of a word.
䢇 ABC to make all letters in a word uppercase (like a Caps
Lock key).
䢇 abc to make all letters in a word lowercase.
Auto-Capital
When Auto-Capital is set to On, the first letter of the first word
in a sentence is capitalized, and the remaining words are all
lowercase.When you enter “.”,“?”, or “!”, and then press
or , your phone recognizes it as the end of the
sentence, and the next letter you enter would be capitalized.
Auto-Capital is not available when your phone is set to ABC or
abc mode.
1. Press OPTIONS (right softkey) > Text Mode >
Text Settings on the message entry screen.
– or –
Press TEXT MODE (right softkey) > Text Settings from
other text input screens.
– or –
From standby mode, press > Settings > Text Entry.
2. Highlight an option and press
.
to turn auto-capitalization on or off. (See
“Auto-Capital” on page 24.)
䡲 Auto-Space to turn auto-spacing on or off while
Predictive Text is on.
䡲 My Words to add words to or edit words in the
Predictive Text database (see next section).
䡲 Predictive Settings to customize the Predictive Text
settings (see page 26).
䡲 Default Input Mode to select the initial entry mode. If
Retain Mode is selected, the previous input mode is
retained when you open the text input screen.
䡲 Auto-Capital
䡲 Add
Word to add words to the database while in
Predictive Text mode (see next section).
䡲 Auto-Substitution to replace abbreviated words or
phrases with full-text equivalents that are stored in the
phone or added by you (appears in Settings > Text
Entry menu only).
䡲 Auto-Complete to finish commonly occurring words
after several letters have been entered.
䡲 Help to view the Predictive Text instructions.
Phone
Phone Basics
Basics
Text Entry Settings
Adding a Word to the Predictive Text Database
If a word you want to enter is not displayed as an option when
using Predictive Text mode, add it to the database.
1. Press OPTIONS (right softkey) > Text Mode >
Text Settings > Add Word on the message entry screen.
– or –
Press TEXT MODE (right softkey) > Text Settings >
Add Word from other text input screens.
– or –
From standby mode, press > Settings > Text Entry >
Add Word.
2A. Phone Basics
25
2. Enter a word and press SAVE (left softkey).The word will
appear as an option the next time you scroll through options
during Predictive Text input.
To edit or delete the words you have added:
1. Press OPTIONS (right softkey) > Text Mode >
Text Settings > My Words on the message entry screen.
– or –
Press TEXT MODE (right softkey) > Text Settings >
My Words from other text input screens.
– or –
From standby mode,press > Settings > Text Entry >
My Words.
2. Highlight a word and press OPTIONS (right softkey).
3. Highlight an option and press .
䡲 Edit
to edit a word in My Words.When finished, press
SAVE (left softkey) to save your changes.
䡲 Delete to delete a word in My Words. Press YES (left
softkey) to confirm the deletion.
26
2A. Phone Basics
Customizing Predictive Text Mode Settings
1. Press OPTIONS (right softkey) > Text Mode >
Text Settings > Predictive Settings on the message
entry screen.
– or –
Press TEXT MODE (right softkey) > Text Settings >
Predictive Settings from other text input screens.
– or –
From standby mode,press > Settings > Text Entry >
Predictive Settings.
2. Highlight an option and press
.
䡲 Next Word Prediction to automatically display the
word that may follow the current text input.
䡲 Word Completion to show the completed words that
match the keys you have entered without entering the
whole word.
䡲 Word Scan to recognize words by searching Contacts
and messages.
to display the word choice list.
enter to specify how many letters (1–3) you
can enter before words are suggested.
䡲 Show after wait to display the time delay in seconds
suggested words appear after you have entered text.
䡲 Show after
Email Address Options
䊳
For more information about Predictive Text (XT9), visit the
Nuance website at http://www.nuance.com/t9/xt9/.
Simple Data Exchange
This feature makes it easy to select certain information from a
text message or email message and automatically save it or
use it in a related application.
Simple Data Exchange works with these types of information:
䢇 Email addresses
䢇 Street addresses
䢇 Phone numbers
䢇 Web addresses (URLs)
Highlight an email address, press , and select an
option:
䡲 Send Message to select Text Message or
Picture Msg.The selected messaging application will
open and the email address will appear in the To: field.
䡲 Share to select Text Message.The selected application
will open and the email address will appear in the
message body.
䡲 Save to Contacts to save the email address in
Contacts.
䡲 Contact Details to display the Contacts entry if the
email address is already saved in Contacts.
Street Address Options
䊳
Highlight a street address, press , and select an option:
䡲 Share to select Text Message.The selected application
will open and the address will appear in the message
body.
䡲 Save to Contacts to save the address in Contacts.
2A. Phone Basics
27
Phone
Phone Basics
Basics
䡲 Word Choice List
Phone Number Options
䊳
28
Highlight a phone number, press , and select an option:
䡲 Call to call the phone number.
䡲 Prepend to prepend a number to the phone number.
䡲 Send Message to select Text Message or Picture
Msg.The selected messaging application will open and
the phone number will appear in the To: field.
䡲 Share to select Text Message.The selected application
will open and the phone number will appear in the
message body.
䡲 Save to Contacts to save the phone number in
Contacts.
䡲 Contact Details to display the Contacts entry if the
phone number is already saved in Contacts.
2A. Phone Basics
Web Address (URL) Options
䊳
Highlight a Web address (URL), press , and select an
option:
䡲 Browse to open the browser to the Web page.
䡲 Share to select Text Message.The selected application
will open and the Web address will appear in the
message body.
䡲 Save to Contacts to save the Web address in Contacts.
Sound Settings
Settings
Sound Settings (page 29)
Display Settings (page 33)
Location Settings (page 36)
Messaging Settings (page 37)
Airplane Mode (page 38)
TTY Use (page 39)
Using the Hearing Aid Device Compatibility
Function (page 40)
⽧ Phone Setup Options (page 41)
⽧ Security Settings (page 42)
⽧
⽧
⽧
⽧
⽧
⽧
⽧
Ringer Types
Ringer types help you identify incoming calls and messages.
You can assign ringer types to individual Contacts entries,
types of calls, and types of messages.
Selecting Ringer Types for Incoming Calls
1. Press
> Settings > Sounds > Ringer Type >
Incoming Calls.
2. Select Contact Entries or Unknown #s.
䡲 If you select Contact Entries, select All Contacts or
One Contact.
3. Select a category, and then select a ringer. (See “Getting
New Ringers” on page 30 if you selected Get New.)
Settings
Settings
2B.
2B. Settings
29
Selecting Ringer Types for Messages
Getting New Ringers
1. Press
> Settings > Sounds > Ringer Type >
Messages.
2. Select Text Message, Picture Msg, or Voicemail.
A wide variety of new ringers is available from the download
menus, and you can access them right from your phone.
(Additional charges may apply, but some are free.)
3. For Voicemail, skip to step 4. Otherwise, select
1. Press > Settings > Sounds > Ringer Type.
2. Select a category and subcategory as required until you
Contact Entries or Unknown #s.
䡲 If you select Contact Entries, select All Contacts or
One Contact.
4. Select a category and then select a ringer.
Tip
Ringer types can be assigned from the Contacts menu.
See “Selecting a Ringer Type for an Entry” on page 56.
Selecting a Ringer Type for Alarms, Power On/Off
Tone, or Scheduled Events
1. Press > Settings > Sounds > Ringer Type.
2. Select Alarm, Power On, Power Off, or Schedule.
3. Select a category and then select a ringer.
30
2B. Settings
display a list of ringer type categories.
3. Select Get New. (The browser will launch and display the
Ringers menu.)
4. Use the navigation key and keyboard to search through
available ringers.When you find one you want, highlight it
and press .
5. To purchase the ringer, highlight Buy and press
. (The
ringer will download automatically.)
6. When the download is finished, select an option to
continue:
䡲 Listen to listen to the ringer.
䡲 Set as to assign the ringer to a call or message type or to
a specific contact.
䡲 Shop to browse for other items to download.
Selecting Vibrate Types
3. Highlight a setting and press
With this feature, you can select vibrate types for incoming
calls, messages, alarms, and scheduled events.
1. Press > Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, Messages, Alarm, or
Schedule.
3. If you select Incoming Calls or Messages, select an
option. Otherwise skip to step 4.
4. Highlight a vibrate type and press
.
Selecting a Key Tone
Your phone offers options for selecting the audible tones
accompanying a keypress.
Note
.
Tone Length setting is enabled only when Type 1 is
selected in Tone Type.
Setting Up Voice Guide
Voice Guide allows you to hear voice prompts and spoken
numbers or key names as you press the key. (The default
setting is Off.)
1. Press > Settings > Sounds > Voice Guide.
2. Select On or Off.
Note
When the ringer volume is set to Silence All or Vibrate
All,Voice Guide does not work.
1. Press > Settings > Sounds > Keytones.
2. Highlight an option and press .
䡲 Tone Length to select a key tone length. (Longer tone
Settings
Settings
lengths may be better for tone recognition when dialing
voicemail or other automated systems.)
䡲 Tone Volume to select a keypress volume level.
䡲 Tone Type to select the sound of a keypress.
2B. Settings
31
Adjusting Volume Settings
Adjust your phone’s volume settings to suit your needs and
your environment.
1. Press > Settings > Sounds > Volume.
2. Select Ringer,Earpiece,Headset, Speakerphone,
Applications, or Start Up/Power Off.
3. Press the navigation key left or right to choose a volume
level and press DONE (left softkey).
You can adjust the ringer volume in standby mode (or
the earpiece volume during a call) by using the volume
button on the left side of your phone.
Tip
You can make your phone vibrate at any volume level by
checking Always Vibrate.
You can set the alert volume separately from the ringer volume
setting.
1. Press
> Settings > Sounds > Volume >
Advanced...
2. Select Alarms, Text Message, Picture Msg, or
Voicemail.
3. Select Separate Volume.
32
2B. Settings
4. Select a volume level, and press DONE (left softkey).
Tip
You can make the alert vibrate at any volume level by
checking Always Vibrate.
Alert Notification
Set your phone to alert you with an audible tone when you
change service areas, once a minute during a voice call, or
when a call has been connected.
1. Press > Settings > Sounds > Alerts.
2. Select Beep Each Minute, Out of Service, Connect, or
Signal Fade/Call Drop.
3. Select On or Off.
Selecting Alert Options for Messages
Display Settings
You can select a repeat status and ringer length for messages.
1.
2.
3.
4.
Press
> Settings > Sounds > Alerts > Messages.
Select Text Message, Picture Msg, or Voicemail.
Select Repeat or Ringer Length.
Highlight a setting and press
.
Silence All
Changing the Backlight Time Length
Select how long the display screen and keyboard remain
backlit after any keypress is made.
To change the screen backlight setting:
1. Press
> Settings > Display > Main Screen >
Backlight.
The Silence All option allows you to mute all sounds.
2. Select Dim Only, Always On, or a preset length of time.
To activate Silence All:
To change the keyboard backlight setting:
䊳
Press and hold the volume button down in standby mode.
(The screen will display“SilenceAll.”)
1. Press > Settings > Display > Keypad Light.
2. Select Always Off or a preset length of time.
To deactivate Silence All:
Press the volume button up repeatedly to select a volume
level.
Note
Long backlight settings reduce the battery’s talk and
standby times.
Settings
Settings
䊳
2B. Settings
33
Changing the Screen Saver
Changing the Phone’s Menu Style
Choose the screen saver that appears when your phone is in
standby mode.
1. Press > Settings > Display > Main Screen >
Screensaver.
2. Highlight an option and press .
3. Highlight a screen saver and press twice.
Choose how your phone’s menu appears onscreen.
Changing the Display Screen Animation
Adjust the font size you see when viewing a message or
entering characters on the text input screen.
Change the animation that you see on the display screen
during outgoing calls or while your phone searches for service.
1. Press > Settings > Display > Main Screen >
Animation > Outgoing Calls or Service Search.
2. Highlight an option and press .
3. Highlight an animation display and press .
Changing the Contrast
Adjust your screen’s contrast (brightness) to suit your
surroundings.
1. Press > Settings > Display > Contrast.
2. Highlight an option and press .
34
2B. Settings
1. Press to display the main menu.
2. Press the left softkey (GRID VIEW or LIST VIEW) to
change the menu style.
Changing the Font Size
To change the display font size:
1. Press
> Settings > Display > Font Size >
Main Screen > Messages.
2. Highlight a font size .You can see the highlighted font size
in the New Size window.
3. If the size is satisfactory, press SAVE (left softkey).
To change the input font size:
1. Press
> Settings > Display > Main Screen >
Input Font.
2. Select Phone Numbers, Messages, or Others.
3. Highlight an input font size.You can see the highlighted
font size in the New Size window.
4. If the size is satisfactory, press SAVE (left softkey).
Changing the Standby Mode Display
Select from among a variety of items to be displayed in standby
mode.
1. Press
> Settings > Display > Main Screen >
Foreground > Clock/Calendar.
2. Highlight a display option and press
twice.
Changing the Text Greeting
The text greeting is displayed on your phone’s screen in
standby mode. Choose the phone’s default greeting (“Sanyo”),
or enter your own custom greeting.
Setting Return to Idle Mode
This feature allows you to select the way to return to idle mode
(standby mode or service search mode).
1. Press > Settings > Display > Return to Idle.
2. A message appears. Press to continue.
3. Select Automatically or End Key.
䡲 Automatically to return to idle mode automatically
when no key is pressed for 30 seconds.
䡲 End Key to return to idle mode by pressing
Note
.
The End Key setting affects the battery’s talk and
standby times.
Your phone may not return to idle automatically if a
browser or some application is running.
1. Press
> Settings > Display > Main Screen >
Foreground > Greeting.
Settings
Settings
2. Select Default or Custom.
䡲 If you select Custom, enter a custom greeting and
press
.
2B. Settings
35
Power Save Mode
Location Settings
This feature helps conserve your battery power by
automatically adjusting settings for certain phone features.
1. Press > Settings > Display > Power Save Mode.
2. A message appears. Press to continue.
3. Select On. (Select Off to deactivate this feature.)
Your phone is equipped with a Location feature for use in
connection with location-based services.
The Location feature allows the network to detect your
position.Turning Location off will hide your location from
everyone except 911.
Sleep Mode
This feature helps conserve your battery power by turning off
the display after a specified time.
1. Press > Settings > Display > Main Screen >
Sleep Mode.
2. Highlight a time interval before the phone goes into sleep
mode and press . (Select Off to deactivate this feature.)
Display Language
You can choose to display your phone’s onscreen menus in
English or in Spanish.
1. Press > Settings > Display > Language.
2. Select English or Español.
36
2B. Settings
Note
Turning Location on will allow the network to detect your
position using GPS technology, making some
applications and services easier to use.Turning
Location off will disable the GPS location function for all
purposes except 911, but will not hide your general
location based on the cell site serving your call. No
application or service may use your location without
your request or permission. GPS-enhanced 911 is not
available in all areas.
To enable your phone’s Location feature:
1. Press > Settings > More... > Location. (The
Location disclaimer will be displayed.)
2. Read the disclaimer and press .
3. Highlight On or Off and press .
When the Location feature is on, your phone’s standby screen
will display the
icon.When Location is turned off, the
icon will be displayed.
Text Messaging Settings
Messaging Settings
With this feature, you can specify the callback number your
recipients see when you send text messages.
Your phone’s advanced messaging capabilities let you send
and receive many different kinds of messages without placing
a voice call.
1. From standby mode, press MESSAGES (left softkey) >
Setting Message Notification
When you receive a message, your phone notifies you by
displaying an icon on your display screen.You can also choose
to be notified with a message notification on your display
screen.
1. From standby mode, press MESSAGES (left softkey) >
Settings > Callback Number.
2. Select My Phone Number, Other, or None. If you select
Other, enter a callback number and press
.
Adding a Customized Signature
Add a customized signature to each message you send.
1. From standby mode, press MESSAGES( left softkey) >
Settings > Signature.
2. Select On. (If you do not wish to attach a signature to your
outgoing messages, select Off.)
3. Enter a signature and press
.
Settings
Settings
Messaging settings allow you to decide how your phone
notifies you of new messages, create a signature with each
sent message, and create your own preset messages.
Setting a Callback Number
Settings > Notification.
2. Select Msgs and Icon or Icon Only.
Tip
Press OPTIONS (right softkey) > Add Signature to
insert your signature on the message entry screen.
2B. Settings
37
Managing Preset Messages
To change the language of the preset message:
Your phone is loaded with 20 preset messages to help make
sending text messages easier. Customize or delete these
messages, such as “Where are you?,”“Let’s get lunch,” and
“Meet me at” to suit your needs, or add your own messages to
the list.
1. From standby mode, press MESSAGES (left softkey) >
To edit or delete a preset message:
Airplane Mode
1. From standby mode, press MESSAGES (left softkey) >
Settings > Preset Messages.The list of preset
messages will be displayed.
2. To edit or delete a message, highlight it and press
OPTIONS (right softkey).
3. Select Edit, edit the message, and press
.
– or –
Select Delete > YES (left softkey) to delete the message.
(You can also reset all messages by selecting Reset all
messages > YES [left softkey].)
Settings > Preset Messages.
2. Press OPTIONS (right softkey) > Select Language.
3. Select English or Spanish.
Airplane Mode allows you to use many of your phone’s
features, such as games and voice memos, when you are in an
airplane or in any other area where making or receiving calls or
data connection is prohibited.When you set your phone to
Airplane Mode, it cannot send or receive any calls or access
online information.
1. Press > Settings > More... > Airplane Mode.
2. Read the disclaimer and press .
3. Select On or Off.
While in Airplane Mode, your phone’s screen will display
“Phone Off.”
38
2B. Settings
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf,
hard of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with select TTY devices. Please
check with the manufacturer of your TTY device to ensure that
it is compatible with digital cell phones.Your phone and TTY
device will connect via a special cable that plugs into your
phone’s headset jack. If this cable was not provided with your
TTY device, contact your TTY device manufacturer to purchase
the connector cable.
When establishing your wireless service, please call your
service provider via the state Telecommunications Relay
Service (TRS) by first dialing
.
To turn TTY Mode on or off:
1. Press > Settings > More... > Accessibility > TTY.
2. Read the disclaimer and press .
3. Select On to turn TTY mode on.
– or –
Select Off to turn TTY mode off.
Note
In TTY Mode, your phone will display the TTY icon if a
TTY device or an optional headset is connected to your
phone.
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be
impaired.
Settings
Settings
TTY Use
2B. Settings
39
WARNING
911 Emergency Calling
It is recommended that TTY users make
emergency calls by other means, including
Telecommunications Relay Services (TRS),
analog cellular, and landline communications.
Wireless TTY calls to 911 may be corrupted
when received by public safety answering
points (PSAPs), rendering some
communications unintelligible.The problem
encountered appears related to software used
by PSAPs.This matter has been brought to the
attention of the FCC, and the wireless industry
and the PSAP community are currently working
to resolve this.
Using the Hearing Aid Device
Compatibility Function
Your phone has been tested for hearing aid device compatibility
and rated. To use this function effectively, set the hearing aid
setting to on.
1. Press
> Settings > More... > Accessibility >
Hearing Aid.
2. Read the disclaimer and press
3. Select On or Off.
.
䡲 On to use a hearing aid device with your phone.
䡲 Off
to use your phone without a hearing aid device.
For more information about hearing aid device compatibility,
see “Using Your Phone With a Hearing Aid Device” on page
114.
40
2B. Settings
Phone Setup Options
Call Answer Mode
Navigation Key Shortcuts
Select how to answer incoming calls on your phone whether by
pressing or any key (except softkeys, side buttons,
,
and ).
1. Press > Settings > More... > Navigation Keys.
2. Highlight the navigation key you wish to reassign and
press
.
3. Using the navigation key or your keyboard, select a
function.
4. Press ASSIGN (left softkey) to save. (If there are additional
levels available, press
before selecting your shortcut.)
1. Press
> Settings > More... > Call Setup >
Call Answer.
2. Select Talk Key or Any Key.
Auto-Answer Mode
Set your phone to automatically pick up incoming calls.
Remember, your phone will answer calls in auto-answer mode
even if you are not present.
1. Press > Settings > More... > Call Setup >
Auto-Answer.
2. Highlight an option and press .
䡲 Hands-free to answer calls automatically when the
phone is connected to an optional headset or hands-free
device.
䡲 Speakerphone to answer calls automatically in
speakerphone mode.
3. Highlight the time you would like your phone to wait before
answering and press
.
2B. Settings
41
Settings
Settings
You can use the navigation keys as shortcuts to access specific
menu items directly from standby mode.You can reassign the
default shortcuts to the menu items you choose.
Headset Options
Setting Power On to Alert
Set up your phone for hands-free use.You can enable the Turbo
Button (operation button on your headset) to make, receive, or
end a call, or to activate ASR (see page 66).You can also select
the ringer mode.
To enable the Turbo Button:
The alert will not sound when your phone is turned off, but
Power On to Alert turns your phone on in Airplane Mode to
alert you even if your phone is turned off.This feature applies
only to schedule or call alarm events, or the alarm clock.
1. Press
1. Press > Settings > More... > Power On to Alert.
2. Select On or Off.
2. Select On.
Security Settings
> Settings > More... > Headset Mode >
Turbo Button.
䡲 Press the turbo button to stop the alarm and/or display
the details of message notifications.
(To disable the Turbo Button, follow steps 1 and 2 and
select Off.)
To select the ringer mode:
1. Press
> Settings > More... > Headset Mode >
Ringer Sound.
2. Select Normal or Headset Only.
42
2B. Settings
All of your phone’s security settings are available through the
Security or Restrict and Lock menu.
Accessing the Security Menu
1. Press > Settings > More... > Security.
2. Enter your lock code to display the Security menu.
Tip
If you can’t recall your lock code, try using the last four
digits of your wireless phone number. If this doesn’t
work, contact your service provider.
Accessing the Restrict and Lock Menu
䊳
Press
> Settings > More... > Restrict and Lock.
Your Phone’s Lock Feature
Changing the Lock Code
䊳
Press > Settings > More... > Security >
Change Lock Code, and then enter and re-enter your
new lock code.
Locking Your Phone
Locking Voice Calls
When your phone is locked, you can only receive incoming
calls or make calls to 911 or special numbers. (See “Special
Numbers” on page 44.)
This setting allows you to block all incoming and outgoing voice
calls (except 911 calls).
> Settings > More... > Security >
Lock My Phone > Lock Now.
䡲 On Power-up to lock your phone whenever it is
turned on.
2. Select Full Lock or Excp. Incom. Calls.
䡲 Full Lock to lock your phone but still receive incoming
calls from special numbers.
䡲 Excp. Incom. Calls to lock your phone but still receive
all incoming calls.
Unlocking Your Phone
1. From standby mode, press UNLOCK (left softkey).
2. Enter your lock code.
1. Press
> Settings > More... > Restrict and Lock >
Voice, and then enter your lock code.
2. Select Lock > Locked. (Select Unlocked to deactivate
this feature.)
Locking the Camera/My Albums/Photos Menu
1. Press
> Settings > More... > Restrict and Lock >
Camera/Pictures, and then enter your lock code.
2. Highlight an option and press
.
䡲 Unlocked to unlock the current camera/pictures lock
Settings
Settings
1. Press
feature.
䡲 Lock Camera to lock camera operation.
䡲 Lock Photos to lock access to files in My Albums.
䡲 Lock All to lock access to Photos menu.
2B. Settings
43
Restricting Calls
Special Numbers
You can restrict incoming and outgoing calls. (This setting does
not apply to 911.)
Special numbers are important numbers that you have
designated as being “always available.”You can call to and
receive calls from special numbers even if your phone is
locked.
1. Press
> Settings > More... > Restrict and Lock >
Voice, and then enter your lock code.
2. Select Restrict > Incoming Calls or Outgoing Calls.
3. Highlight an option and press .
䡲 Allow All to make or receive all calls.
䡲 Contacts Only to make or receive calls to or from
Contacts entries, voicemail, or special numbers only.
䡲 Special #s Only to make or receive calls to or from
special numbers only.
Note
Restricted incoming calls are forwarded to voicemail.
If Contacts Only or Special #s Only is selected, you
can edit the Contacts only fromEdit Contacts List in
the Security menu.
You can save up to three special numbers.
To add or replace a special number:
1. Press > Settings > More... > Security >
Special Numbers.
2. Select a location for your entry.
3. Enter the number and press .
– or –
Press OPTIONS (right softkey) to select from your
Contacts or voicemail number.
4. Press DONE (left softkey).
Note
There are no speed dial options associated with special
numbers.
You cannot make calls to or receive calls from special
numbers if Voice is set to Locked in Restrict and Lock.
(See “Locking Voice Calls” on page 43.)
44
2B. Settings
Deleting Phone Content
䡲 Delete Calendar
1. Press
> Settings > More... > Security >
Delete/Reset.
2. Highlight an option and press
.
䡲 Delete Web Cookies to delete all Web cookies (data
saved in your phone by sites you have visited).
䡲 Delete Web History to delete all saved Web addresses
of sites you have visited.
䡲 Delete Web Cache to delete all Web page information
saved in your phone.
䡲 Delete Contacts to delete all of your Contacts entries.
䡲 Delete My Stuff to delete all items you have
downloaded to your phone.
䡲 Delete Photos to delete all pictures saved in your
phone.
䡲 Delete Voice Data to delete all voice data and call
memos saved in the phone.
䡲 Delete Message to delete all messages (including
locked ones) in your phone and entries in the Recent List,
and to reset all preset messages.
3. Read the disclaimer and press
> YES (left softkey).
Resetting Your Phone and Deleting Stored
Data
This option lets you clear different types of personal
information stored on your phone, reset your phone to factory
settings, or both.
1. Press > Settings > More... > Security >
Delete/Reset.
2. Highlight an option and press .
䡲 Reset Browser to clear your Web browser’s history,
favorites (bookmarks), cookies, error log, auto-complete
text, and URLs.
䡲 Reset Picture Msg to clear your authentication ID for
your picture messaging account.
䡲 Reset All Settings to restore all the factory default
settings. Contacts, history, calendar, and messages are
not affected.
䡲 Reset Phone to reset all settings and delete all data on
your phone.
2B. Settings
Settings
Settings
Use the Security menu to quickly delete all the content you
have created or stored in your phone.
Events to delete all scheduled events
(including secret ones).
45
3. Read the disclaimer and press .
4. If you are certain that you would like to delete data stored
on your phone, press YES (left softkey).
Security Features for Data Services
Disabling Data Services
You can disable data services without turning off your phone;
however, you will not have access to all data services, including
Web and messaging. Disabling data services will avoid any
charges associated with these services.While signed out, you
can still place or receive phone calls, check voicemail, and use
other voice services.You may enable data services again at any
time.
To disable data services:
1. Press
> Settings > More... > Restrict and Lock >
Web > Disable Web.
2. Read the disclaimer and press DISABLE (right softkey) to
sign out.
To enable data services:
䊳
46
Press > Settings > More... > Restrict and Lock >
Web > Enable Web.
2B. Settings
Locking Data Services
You can disconnect from data services and then lock access to
prevent others who may use your phone from re-enabling data
services.
1. Press
> Settings > More... > Restrict and Lock >
Web > Off and Lock, and then enter your lock code.
2. Highlight an option and press
.
䡲 Locked to disconnect from data services and then lock
further access to data services.
䡲 Unlocked to restore access without connecting to data
services.
Note
Unlocking allows reconnection to data services but
does not actually reconnect you.To connect to theWeb,
select Enable Web.
Viewing History
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
Viewing History (page 47)
History Thread (page 48)
History Details (page 48)
History Menu Options (page 49)
Making a Call From History (page 49)
Saving a Phone Number From History (page 49)
Making a New Group Entry From History (page 50)
Deleting History (page 50)
History is a list of the last 60 phone numbers (or Contacts
entries) for calls you placed, accepted, or missed. History
makes redialing fast and easy. It is continually updated as new
numbers or entries are added to the beginning of the list and
the oldest entries are removed from the bottom of the list.
History
2C. History
Each entry contains the phone number (if available) and
Contacts entry name (if the phone number is in your Contacts).
Duplicate calls (calls from the same number) may appear only
once on the list.
To display History:
䊳
From standby mode, press
Note
.
History records only calls that occur while the phone is
turned on.If a call is received while your phone is turned off,
it will not be included in the phone’s history.
2C. History
47
History Icons
History Details
You can determine if an entry was an incoming, outgoing, or
missed call from the icons shown below.
To display History details:
– Outgoing Call
1. Press .
2. Highlight an entry from the list and press
– Missed Call
3. Highlight an entry and press
– Incoming Call
History Thread
The History thread screen shows all history for a selected entry.
To display a History thread:
1. Press .
2. Highlight an entry and press
Tip
48
.
Text messages are included in the History thread.
2C. History
.The History
thread is displayed.
.
The History details screen shows the number type (Mobile,
Home, etc.), phone number, and date and time of the call.An
onscreen menu is also displayed according to the type of call.
(See “History Menu Options” on page 49.)
To make a call from the History details screen, press .
You may see several menu items on the onscreen menu. Press
OPTIONS (right softkey) for additional options.
䢇 Send Message to send a message to the selected entry.
䢇 New Group to access a Group entry menu to create a new
Group entry.
䢇 Contact Details to display information about the entry if it
has already been saved in your Contacts.
䢇 Save Contact to save a phone number. (See “Saving a
Phone Number From History” shown right.)
䢇 Delete to delete the entry.
䢇 Delete All to delete all History entries. (See “Deleting
History” on page 50.)
䢇 Rename to change any entry’s current name to the Caller ID
name associated with the entry.
䢇 Prepend to add numbers to the beginning of the selected
number.
Making a Call From History
1. Press .
2. Highlight an entry and press
.
Note
You cannot make calls from History to entries identified
as No Caller ID, Private, Unavailable ID, or
Restricted ID.
History
History Menu Options
Saving a Phone Number From
History
Your phone can store up to 600 Contacts entries, and each
Contacts entry can store up to a total of seven phone numbers.
1. Press .
2. Highlight a history entry and press OPTIONS (right
softkey) > Save Contact.
3. Select New Entry or Existing Entry.
4. If New Entry was selected, select a number type, and
then enter the new entry name.
– or–
If Existing Entry was selected, select an existing entry to
which you want to save the number, and then highlight a
number type and press .
5. Press DONE (left softkey) to save the entry.
2C. History
49
Making a New Group Entry From
History
Deleting History
You can make and save a new group entry from History.
1. Press .
2. Highlight an entry you wish to delete and press OPTIONS
1. Press > OPTIONS (right softkey) > New Group.
2. Read the message and press START (left softkey).
3. Select the check box for each member you wish to add
and press CONTINUE (left softkey).
Tip
Press OPTIONS (right softkey ) > Enter New Address or
Contacts to enter a new address or a phone number, or
to select an entry from your Contacts.
4. Enter a group name and press
50
2C. History
> SAVE (left softkey).
You can delete individual or all entries in your History.
(right softkey) > Delete.
Tip
Select Delete All to delete all entries.
3. If you are certain you want to delete an individual entry or
all entries from History, press DELETE (left softkey).
About Contacts
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
About Contacts (page 51)
Displaying the Contacts List (page 51)
Displaying Contacts Details (page 51)
Adding a New Contacts Entry (page 52)
Creating a Group (page 52)
Editing Groups (page 53)
Finding Contacts Entries (page 54)
Viewing History From Contacts (page 54)
Using Contacts Information in Other Applications
(page 54)
Editing a Contacts Entry (page 55)
Assigning Speed Dial Numbers (page 55)
Selecting a Ringer Type for an Entry (page 56)
Assigning a Picture to a Contacts Entry (page 57)
Printing a Contacts Entry (page 57)
Secret Contacts Entries (page 57)
Your phone can store up to 600 Contacts entries. Each entry
can contain up to seven phone numbers, three email
addresses, and one Web address.You can also add Contacts
entries to a Group, allowing you to send the same text, picture,
or voice message to up to 25 Contacts entries at one time.
Displaying the Contacts List
䊳
From standby mode, press CONTACTS (right softkey).
If you highlight a name, the main phone number is displayed.A
group is distinguished by a group icon and the number of group
members will be displayed when highlighted.
Displaying Contacts Details
1. From standby mode, press CONTACTS (right softkey).
2. Highlight an entry for which you want to see the details and
press
.
3. Highlight any data field and press
.You will see
onscreen menu options for the information displayed.
2D. Contacts
51
Contacts
2D. Contacts
Note
If you select a group in step 2, entries or phone
numbers belonging to the group are displayed.
Adding a New Contacts Entry
1. From standby mode, press CONTACTS (right softkey) >
Add New > New Contact.
2. Enter a name for the new entry and press the navigation
key down.
3. Enter the phone number for the entry and press .
4. Highlight a number type for the entry (Mobile, Home,
Work, Pager, Fax, or Other) and press
.
5. Add other information (email address, URL, or street
address, etc.).
6. Press DONE (left softkey).
After you have saved the number, the new Contacts entry is
displayed.
Tip
ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local emergency
contacts under “ICE” in your phone’s Contacts list. For
example, if your mother is your primary emergency
contact, list her as “ICE–Mom” in your Contacts list.To
list more than one emergency contact, use “ICE1–___,”
“ICE2–___,” etc.
Creating a Group
You can create a group by assigning Contacts entries as
members and then naming the new group.
1. From standby mode, press CONTACTS (right softkey) >
Add New > New Group.
2. Read the message and press START (left softkey).
3. Highlight an entry you want to add to a group and press
A check mark will appear in the box next to the selected
entry.
4. When you have checked all the entries you want to add,
press CONTINUE (left softkey).
52
2D. Contacts
.
Press OPTIONS (right softkey) > Enter New Address or
Recent History to enter a new phone number or
address, or to select an entry from your history.
5. Enter a name for the new group and press
6. Press SAVE (left softkey).
.
Editing Groups
1.
2.
3.
4.
5.
From standby mode, press CONTACTS (right softkey).
Highlight the group you want to edit.
Press OPTIONS (right softkey) > Edit Group.
Change the group name or the group icon and press .
Press SAVE (left softkey).
5. Highlight an entry you want to add and press .
6. Repeat step 5 to add additional members.
7. Press CONTINUE (left softkey) > SAVE (left softkey).
Removing Members From a Group
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a group from which you want to remove a
member.
3. Press OPTIONS (right softkey) > Edit Group.
4. Highlight a member and press OPTIONS (right softkey) >
Remove from Group > YES (left softkey).
5. Repeat step 4 to remove additional members.
6. Press SAVE (left softkey).
Adding Members to a Group
Deleting a Contacts Entry or Group
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the group to which you want to add members.
3. Press OPTIONS (right softkey) > Edit Group >
1. From standby mode, press CONTACTS (right softkey).
2. Highlight an entry or a group you want to delete.
3. Press OPTIONS (right softkey) > Delete Contact or
Add More.
4. Read the message and press START (left softkey).
Contacts
Tip
Delete Group.
4. Press DELETE (left softkey) or YES (left softkey).
2D. Contacts
53
Finding Contacts Entries
Viewing History From Contacts
1. From standby mode, press CONTACTS (right softkey).
2. Scroll through all the entries.
You can view the history of a selected Contacts entry from the
Contacts list.
– or –
Enter the first two or more letters of any part of a name.
Contacts with matching letters are listed. (The more letters
you enter, the more your search narrows.)
3. To display an entry, highlight it and press
.
䊳
Highlight an entry and press OPTIONS (right softkey) >
Contact History.
Using Contacts Information in Other
Applications
䡲 Press the navigation key left or right to display other
listed entries.
4. To dial the entry, highlight the phone number and
press
Tip
.
You can also find a group. Press Menu/OK to display
the members of the group.
You can use saved Contacts entry’s information in other
applications.
To copy information into a message:
1. From the Contacts list, highlight an entry and press
2. Highlight the information you want to copy and press
3. Select Share.
4. Select Text Message.
54
2D. Contacts
.
You can copy phone numbers, email addresses, URLs,
street addresses, etc.
.
Note
For more information about messaging, see “Text
Messaging (SMS)” on page 93 and “Email” on
page 105.
Editing a Contacts Entry
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the Contacts entry you want to edit and press
OPTIONS (right softkey) > Edit Contact.
3. Select the field you wish to edit, and then add or edit the
information and press
.
4. Press DONE (left softkey).
Assigning Speed Dial Numbers
Your phone can store up to 98 phone numbers in speed dial
locations. (See “Speed Dialing” on page 22.)
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing Contacts
entry. (See “Adding a New Contacts Entry” on page 52.)
2. Highlight the phone number and press OPTIONS (right
softkey) > Set Speed Dial.
3. Highlight an available speed dial location and press .
4. Press
Contacts
After you select one or more recipients, the text entry screen
for the type of message specified will open, and the selected
text will appear in the body of the message.
to return to the Contacts menu.
To assign a speed dial number to an existing phone
number:
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a Contacts entry and press .
3. Highlight a number and press OPTIONS (right softkey) >
Set Speed Dial.
4. Highlight an available speed dial location and press
2D. Contacts
.
55
Tip
To replace a current assignment, select a location and
press REPLACE (left softkey).
To check speed dial assignments:
䊳
From standby mode, press CONTACTS (right softkey) >
OPTIONS (right softkey) > Settings > Speed Numbers.
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so that you can identify
the caller by the ringer type. (See “Ringer Types” on page 29.)
1.
2.
3.
4.
5.
6.
7.
From standby mode, press CONTACTS (right softkey).
Highlight a Contacts entry and press
Select Incoming Calls, Text Message or Picture Msg.
Select Change.
Highlight an option and press
Highlight a ringer and press
Tip
56
2D. Contacts
.
Select Set Ringers.
.
.
If you select Get New in step 6, you can purchase
and download new ringers right from your phone.
For details, see “Getting New Ringers” on page 30
and “Downloading Content” on page 106.
Assigning a Picture to a Contacts Entry
Secret Contacts Entries
Assign a picture to display each time a certain contact calls
you.
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a Contacts entry and press .
3. Highlight the icon and press .
4. Select Select Image.
5. Highlight an option and press .
6. Highlight an image and press twice.
When you make an entry secret and hide it, that entry is not
displayed in your Contacts. In History, a telephone number is
displayed but the Contacts entry’s name is not.
1.
2.
3.
4.
5.
From standby mode, press CONTACTS (right softkey).
Highlight an entry you want to print.
Press OPTIONS (right softkey) > Print.
Select the entry.
Follow the onscreen instructions to print the entry using a
Bluetooth-enabled printer. (See “Printing Data via
Bluetooth” on page 87.)
Contacts
Printing a Contacts Entry
To make an entry secret:
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a Contacts entry and press OPTIONS (right
softkey) > Set as Secret.
3. Select On.
To hide secret entries:
1. From standby mode, press CONTACTS (right softkey) >
OPTIONS (right softkey) > Settings > Hide Secret.
2. Enter the four-digit lock code.
2D. Contacts
57
To show secret entries:
1. From standby mode, press CONTACTS (right softkey) >
OPTIONS (right softkey) > Settings > Show Secret.
2. Enter the four-digit lock code.
58
Note
If you make an entry secret, calls cannot be made to or
received from that entry if Contacts Only is selected in
Settings > More... > Restrict and Lock > Voice >
Restrict > Incoming Calls or Outgoing Calls (see
page 44).
Tip
If you can’t recall your lock code, try using the last four
digits of your wireless phone number. If this doesn’t
work, contact your service provider.
2D. Contacts
2E. Calendar and Tools
3. Enter a description and press .
4. Select a category for the event (Appointment, Meeting,
etc.) by highlighting the category field and press
.
5. Select a priority for the event by highlighting the priority
field and pressing
⽧
⽧
⽧
⽧
⽧
⽧
Calendar (page 59)
Alarm Clock (page 63)
Calculator (page 64)
World Clock (page 64)
Countdown Timer (page 64)
Stopwatch (page 65)
.
6. Select a start and end time for the event by highlighting the
time field and pressing
.
7. Enter a location for the event and press .
8. Select a ringer type for the alarm by highlighting the ringer
field and pressing
.
䡲 To download ringers, select Get New.
Calendar
9. Select an alarm time by highlighting the alarm time field
Adding an Event to the Calendar
10. Select a repeat status for the alarm by highlighting the
Your Calendar helps organize your time and reminds you of up
to 100 important events.
11. Press SAVE (left softkey).
.
repeat field and pressing
.
Calendar / Tools
and pressing
1. Press > Calendar.
2. Highlight the day to which you would like to add a schedule
event and press OPTIONS (right softkey) > Add
Schedule.
2E. Calendar and Tools
59
Tip
To change the calendar display views, press the left
softkey repeatedly to toggle between MONTHLY and
WEEKLY views.
Press the volume button up/down on the monthly view to
display the previous/next month. On the weekly view,
press the navigation key up/down to display the
previous/next week.
Press OPTIONS (right softkey) > Settings > Holiday to
enter holidays.
4. Enter a phone number directly or press OPTIONS (right
softkey) > From Contacts or Voicemail.
䡲 From Contacts to select a number from your Contacts.
䡲 Voicemail to select your voicemail access number.
5. Select a category for the call by highlighting the category
field and pressing
.
6. Select a time and date for the call by highlighting the time
and date field and pressing
.
7. Select a ringer type for the reminder by highlighting the
Adding a Call Reminder to the Calendar
You can set up to 15 call reminders to let you know when and to
whom to place a scheduled call.
1. Press > Calendar.
2. Highlight the day to which you would like to add a call
reminder and press OPTIONS (right softkey).
3. Press the navigation key right and select
Add Call Alarm.
60
2E. Calendar and Tools
ringer field and pressing
.
䡲 To download ringers, select Get New.
8. Select a repeat status for the reminder by highlighting the
repeat field and pressing
9. Press SAVE (left softkey).
.
Adding a To Do List Item to the Calendar
Calendar Alerts
Your phone can store and manage up to 40 To Do list items.
If you have a scheduled event or call reminder on the Calendar,
your phone alerts you by a ringing or vibrating alarm and
displays a summary of the scheduled event or call reminder.
item and press OPTIONS (right softkey).
3. Press the navigation key right and select Add To Do.
4. Enter a description and press .
5. Select a category for the item by highlighting the category
field and pressing
Tip
.
6. Select a priority for the item by highlighting the priority field
and pressing
To respond to the alarm:
Press any key (except ,
, and the right softkey) to stop
the ringer and vibration and start snooze mode.
䢇
.
7. Select a time and date for the item by highlighting the time
and date field and pressing
.
䢇
䢇
Press EXIT (right softkey),
, or to clear the alarm.
Press to dial the phone number (for a call reminder).
Note
8. Select a status for the item by highlighting the status field
and pressing
Action.
.When you add an item, set it to Needs
9. Press SAVE (left softkey).
To change the alarm settings, press OK > Calendar >
OPTIONS (right softkey) > Settings > Alarm to set the
ringer length and snooze options.
Depending on the Power On to Alert setting, the alarm
setting will be active even if the phone is turned off. (See
“Setting Power On to Alert” on page 42.)
Calendar / Tools
1. Press > Calendar.
2. Highlight a day to which you would like to add a To Do list
Viewing Events
Tip
Days with scheduled events or call reminders set are
indicated by a small triangle just to the lower right of the
date.
2E. Calendar and Tools
61
1. Press > Calendar.
2. Highlight the day for which you would like to view events
and press .The day’s event list is displayed.
– or –
Press OPTIONS (right softkey) > Schedule List,
Call Alarm List, or To Do List.
Deleting Events
1. Press > Calendar.
2. Highlight the day from which you would like to delete an
event and press .
– or –
Press OPTIONS (right softkey) > Schedule List,
Call Alarm List, or To Do List.
3. Highlight an event and press
.The event’s details are
displayed.You can edit the event on this screen.
3. Highlight an event and press OPTIONS (right softkey) >
Printing Events
1. Press > Calendar.
2. Highlight the day for which you would like to print an event
and press .The day’s event list is displayed.
– or –
Press OPTIONS (right softkey) > Schedule List,
Call Alarm List, or To Do List.
3. Highlight an event you want to print and press OPTIONS
(right softkey) > Print.
4. Follow the onscreen instructions to print the entry using a
Bluetooth-enabled printer. (See “Printing Data via
Bluetooth” on page 87.)
62
2E. Calendar and Tools
Delete.
4. Highlight an option and press
.
䡲 This to delete the highlighted event.
䡲 Select to delete multiple events.
䡲 All on This List to delete all events on the list.
䡲 Completed to delete completed To Do List items.
5. Press YES (left softkey).
To delete old events:
䊳
Press > Calendar > OPTIONS (right softkey) >
Delete Memory > Delete Old > YES (left softkey).
6. Turn the alarm on by highlighting the alarm field and
To delete all events:
pressing
1. Press
> Calendar > OPTIONS (right softkey) >
Delete Memory > Delete All > YES (left softkey).
2. Press YES (left softkey).
.
7. Press SAVE (left softkey).
Tip
Alarm Clock
Press ON or OFF (left softkey) to toggle the alarm on
and off.
To change the alarm settings, press SETTINGS (right
softkey) to set the ringer length and snooze options.
Your phone comes with a built-in alarm clock that has multiple
alarm capabilities.
1. Press > Tools > Alarm Clock.
2. Highlight an alarm number and press .
3. Enter a description for the alarm by highlighting the
description field and pressing
To respond to the alarm:
䊳
Press any key (except ,
, and the right softkey) to
stop the alarm and start snooze mode.
䊳
Press EXIT (right softkey),
, or
to clear the alarm.
.
4. Select a time for the alarm by highlighting the time field
and pressing
.
repeat field and pressing
Calendar / Tools
5. Select a repeat status for the alarm by highlighting the
.
2E. Calendar and Tools
63
Calculator
World Clock
Your phone comes with a built-in calculator.
1. Press > Tools > Calculator.
2. Enter numbers using your keyboard.
To view the time in different locations:
1. Press > Tools > World Clock.
2. Press the navigation key left or right to scroll through
different time zones.
Note
䡲 Press the appropriate key for an arithmetic option
(
).
䡲 Press
to enter a decimal point.
䡲 Press
to clear all numbers.
3. Press
64
or
for the total.
2E. Calendar and Tools
Press SUMMER (left softkey) or STANDARD (right
softkey) to change between daylight saving and
standard time.
Countdown Timer
This feature allows you to use your phone as a countdown
timer to alert when a specified period of time has elapsed.You
can set up to five timers.
1. Press > Tools > Countdown.
2. Highlight a countdown timer number and press
.
3. Highlight an item to set and press
Stopwatch
.
䡲 Description to enter a description of the countdown.
䡲 Time to enter the length of the countdown.
䡲 Alarm to set the countdown alarm to on or off.
1. Press > Tools > Stopwatch.
2. Press MODE (left softkey) to select split timing or lap
timing.
4. Press SAVE (left softkey).
Tip
Press ON or OFF (left softkey) to toggle the countdown
alarm on and off.
To change the alarm settings, press SETTINGS (right
softkey) to set the ringer length and snooze options.
3.
4.
5.
6.
Press START (right softkey) to start the stopwatch.
Press SPLIT or LAP (left softkey) to record the time.
Press STOP (right softkey) to stop timing.
Press RESET (left softkey) to reset the stopwatch to zero.
To respond to the alarm:
䊳
Press any key (except ,
, and the right softkey) to
stop the alarm and start snooze mode.
䊳
Press EXIT (right softkey),
to clear the alarm.
Calendar / Tools
, or
2E. Calendar and Tools
65
2F. Voice Services
⽧ Automatic Speech Recognition (ASR) (page 66)
⽧ Voice and Call Memos (page 69)
Automatic Speech Recognition
(ASR)
You can use your phone’s built-in automatic speech
recognition (ASR) software to dial a phone number or to launch
phone functions.All you have to do is to talk into the phone, and
ASR will recognize your voice and complete tasks by itself.
Activating ASR
䊳
From standby mode, press and hold
or
.
The “SAY A COMMAND” screen appears and the phone
prompts you to say the name of the command you want to use.
To complete your task, simply follow the voice prompts.
66
2F. Voice Services
Available ASR commands are:
Call <Name or #> to call an entry in your Contacts list or a
spoken phone number. (See below for details.)
䢇 Go To <Menu> to jump directly to menu items or
applications. (See page 67 for details.)
䢇 Check <Item> to check your phone’s status. (See page 67
for details.)
䢇
Tip
Use ASR in a quiet environment so it can accurately
recognize your commands.
During ASR operation, press HELP (left softkey) to get
instructions using the software.
Making a Voice Call Using ASR
1. Press and hold or .
2. When you hear “Say a command,” say “Call .”
3. When you hear “Say the name or number,” say a name or a
phone number.
4. When you hear “Which location?,” say a number type (for
example,“Mobile”).
Note
You can skip steps 3 and 4 by saying a name and
location after “Call” without pausing (for example,“Call
John Jones mobile”).
If ASR does not recognize the name or number, it will
find the most likely matches and display a list of up to
three names or numbers.You will hear “Did you say
Call...” followed by the name or number.You can
confirm by saying “Yes.” Say “No” to change the
selection.
Opening Menus Using ASR
You can jump directly to many menu items or applications by
saying “Go to” followed by a menu option.
1. Press and hold or .
2. When you hear “Say a command,” say “Go To.”
3. When you hear “Which shortcut?,” say an application
name (for example,“Messages”).
Tip
Say “More options” to display additional application
names.
Checking Phone Status Using ASR
Voice Services
Tip
You can use ASR to obtain information about your phone:
䢇 Status (all of the following except My Phone Number)
䢇 Time
䢇 Signal Strength
䢇 Network
䢇 Battery
䢇 My Phone Number
1. Press and hold or .
2. When you hear “Say a command,” say “Check.”
3. When you hear “Which status item?,” say a command.
ASR Settings
To change ASR confirmation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Confirmation.
2F. Voice Services
67
3. Highlight an option and press
.
䡲 Automatic to ask for confirmation only when the system
is not sure what you said.
Confirm to always ask for confirmation.
䡲 Never Confirm to never ask for confirmation.
䡲 Always
3. Highlight an option and press
.
Mode to sound a beep only.
䡲 Prompt Mode to prompt for required information.
䡲 Readout Mode to prompt for required information and
to read out the content displayed on the main screen.
䡲 Expert
To adapt the system to your voice:
To change the ASR dialing region:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation >
1. Press and hold or .
2. Press SETTINGS (right softkey) > Dialing Region.
3. Highlight an option and press .
Adapt Voice.
3. Press START (left softkey) and repeat each word, phrase,
or telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation >
Reset Voice > YES (left softkey).
To change the ASR mode:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Audio Modes.
68
2F. Voice Services
䡲 North America to recognize only numbers valid in North
America.
䡲 Other to recognize any number regardless of location.
To display the ASR software version:
1. Press and hold or .
2. Press SETTINGS (right softkey) > About.
To stop recording:
䊳
Use your phone’s voice memos to record brief memos to
remind you of important events, phone numbers, or grocery list
items, and call memos to record the other party’s voice during
a phone call.
Note
You can store up to 1900 memos on your phone.
Maximum recording time is up to three minutes.
To record a voice memo:
1. Press > Tools > Voice Memo > Record.
2. Start recording after the beep.
Press
,
,
Note
Only the other party’s voice is recorded during this
process.
Playing Voice/Call Memos
1. Press > Tools > Voice Memo > List.
2. Highlight the memo you want to play and press
.
– or –
Press OPTIONS (right softkey) > Play > All to play all
memos continuously.
To play multiple memos:
To stop recording:
䊳
Press ,
, or STOP (left softkey). (Recording will also
stop when you disconnect.)
Voice Services
Voice and Call Memos
, or STOP (left softkey).
To record a call memo:
1. During a call, press OPTIONS (right softkey) >
Voice Memo.
2. Start recording after the beep.
1. Press > Tools > Voice Memo > List.
2. Press OPTIONS (right softkey) > Play > Multiple and
select memos you want to play.
3. Press PLAY (left softkey).
Note
Press SLOW (left softkey) or FAST (right softkey) to
change the playing speed. Press the navigation key left
or right to play the previous or next memo.
2F. Voice Services
69
Managing Voice/Call Memos
1. Press > Tools > Voice Memo > List.
2. Highlight the memo you want to manage and press
OPTIONS (right softkey).
3. Highlight an option and press
.
䡲 Edit Title to edit the title of a memo.
䡲 Properties to display information about a memo.
䡲 Type Filter to display only voice memos or only call
memos.
Deleting Voice/Call Memos
1. Press > Tools > Voice Memo > List.
2. Highlight the memo you want to delete and press
OPTIONS (right softkey) > Delete > This > YES (left
softkey).
Tip
70
Press OPTIONS (right softkey) > Delete > All to delete
all memos.
2F. Voice Services
To delete multiple memos:
1. Press > Tools > Voice Memo > List.
2. Press OPTIONS (right softkey) > Delete > Multiple and
select memos you want to delete.
3. Press DELETE (left softkey) > YES (left softkey).
2. Using the phone’s display screen as a viewfinder, aim the
⽧
⽧
⽧
⽧
⽧
Taking Pictures (page 71)
Storing Pictures (page 75)
Sending Pictures (page 77)
Viewing Picture Messages (page 79)
Managing Pictures (page 80)
Taking Pictures
Taking pictures with your phone’s built-in camera is as simple
as choosing a subject, pointing the lens, and pressing a button.
1. Press and hold
(the camera button located on the left
side of your phone) to activate camera mode. (Additional
camera options are available. See “Camera Mode
Options” on page 72 for more information.)
Tip
camera lens at your subject.
, , or CAPTURE (left softkey) until the
shutter sounds.The picture will automatically be saved in
the In Phone folder. (See “Storing Pictures” on page 75.)
䡲 To return to camera mode to take another picture,
press
.
4. Press OPTIONS (right softkey) for more options.
䡲 Take New Picture to return to camera mode to take
another picture.
䡲 Send Media to send your picture. (See “Sending
Pictures From the In Phone Folder” on page 78.)
䡲 Upload to upload the picture to the picture messaging
website (www.plspictures.com). (See “Uploading
Pictures” on page 80.)
䡲 Review Media to go to the In Phone folder to review
your saved pictures.
䡲 Set as to assign the picture. (See “Assigning Pictures”
on page 72.)
䡲 Delete to delete the picture you just took.
䡲 Details/Edit to edit your picture or display details
relating to your pictures.
3. Press
Camera
2G. Camera
To activate camera mode,you can also press Menu/OK >
Photos > Camera.
2G. Camera
71
Assigning Pictures
Camera Mode Options
Assign a picture as a screen saver or as a picture ID for a
Contacts entry.
You can set various camera options by pressing the following
keys in camera mode.
1. Take a picture. (See steps 1–3 on page 71.)
2. With the picture displayed,press OPTIONS (right softkey) >
Set as and select an option.
䡲 Picture ID to assign the picture to a Contacts entry.
Highlight an entry and press twice to assign the
picture.
䡲 Screensaver to assign the picture as a screen saver.
Press to assign the picture.
Tip
72
You can also assign pictures from the My Albums menu.
See “In Phone Folder Options” on page 76 or
“Managing Online Pictures From Your Phone” on
page 80.
2G. Camera
Key
Navigation Key
Up/Down
Navigation Key
Left/Right or Volume
Button Up/Down
Description
Note
Opens the Sharpness setting
pop-up window.
Select Auto or Manual.
Opens the Contrast setting
pop-up window.
Opens the White Balance
setting pop-up window.
Select Auto or Manual.
Opens the Brightness setting
pop-up window.
Displays the User Settings
screen.
Select Auto or Manual.
Shows/hides the status
indicators and softkeys.
Sets zoom function.
Select an item shown in
“Camera Icons” on page 75.
See “Saving Your Settings”
on page 74.
See “Zoom” on page 74.
Other options can be displayed by pressing OPTIONS (right
softkey).
䢇 Picture Mode to select a picture mode from Normal,
Beach/Snow, Scenery, Mirror Image, or Night/Dark.
䢇 Self-Timer to activate the camera’s timer. (See “Self-Timer”
on page 73.)
Fun Tools to select an option from the following:
䡲 Multiple Shots to take multiple shots. (See “Multiple
Shots” shown right.)
䡲 Fun Frames to select your favorite fun picture frame to
decorate your picture.
Note
You cannot use Fun Frames feature when resolution is
set to 1.3M. (See “Camera Settings” on page 74.)
䡲 Color
䢇
䢇
䢇
Tone to select a wide variety of color tones for the
picture.
Camera Settings to select your settings. (See “Camera
Settings” on page 74.)
Review Media to go to the In Phone folder to review your
saved pictures.
Key Guidance to indicate the key functions in camera
mode.
3. Press
or START (left softkey) when you are ready to
start the timer. (You will see at the top of the screen and
your phone will beep during the countdown.)
4. Get ready for the picture. (When the timer is down to three
seconds, the self-timer icon will turn red and the tone of
the beep will change.)
To cancel the self-timer after it has started:
䊳
Press CANCEL (right softkey) or
.
Multiple Shots
Camera
䢇
This feature allows you to take four or eight shots in a
continuous sequence.When you take multiple shots, the
icon will be displayed in the viewfinder.
1. From camera mode, press OPTIONS (right softkey) >
Fun Tools > Multiple Shots.
Self-Timer
1. From camera mode, press OPTIONS (right softkey) >
Self-Timer.
2. Highlight a delay time (10 Seconds or 5 Seconds) and
press
.
Note
When taking multiple shots, the resolution is
temporarily set to Low-320x240.
2. Highlight an option (4 Shots or 8 Shots) and press
3. Highlight the duration of the interval between shots
(Normal or Fast) and press
.
.
2G. Camera
73
4. Press
, , or CAPTURE (left softkey) to take the
pictures. (The MULTIPLE SHOTS folder will display up to
eight thumbnail pictures per screen.)
Zoom
䡲 Shutter
Sound to select a shutter sound (Default,
“Say Cheese,” “Ready,” or Off).
䡲 Status Bar to show or hide status indicators and
softkeys.
䡲 Save Setting to select the way to save pictures.
This feature allows you to zoom in on an object when you take a
picture.You can adjust the zoom from 1x to 12x.
Saving Your Settings
1. From camera mode, press the navigation key right or left,
You can save your favorite camera mode options as your
preferred settings.
or the volume button up or down to adjust the zoom.
2. Press
,
, or CAPTURE (left softkey) to take a
picture.
Camera Settings
1. From camera mode, press OPTIONS (right softkey) >
Camera Settings.
2. Highlight an option and press
.
䡲 Resolution to select a picture’s file size
(1.3M-1280x960, Medium-640x480, or
Low-320x240).
䡲 Quality to select the picture quality setting (Fine,
Normal, or Economy).
74
2G. Camera
1. Set your favorite camera mode options and press .
2. Highlight an unassigned number and press > YES
(left softkey).
3. Enter a title and press .
4. Confirm the settings and press
.
To retrieve your settings:
1. From camera mode, press .
2. Highlight a setting and press > YES (left softkey).
Note
To replace settings, highlight the settings to be replaced
and press OPTIONS (right softkey) > Overwrite > YES
(left softkey).
Storing Pictures
Camera Icons
Beach/Snow
Scenery
Picture
Mode Mirror Image
Night/Dark
White
Balance
Icon
Details
Use this setting in bright light.
Use this setting for scenery at a distance.
Use this setting to take a mirror image.
Use this setting in low light.
Sunny
Use this setting for sunny weather.
Cloudy
Use this setting for cloudy weather.
Tungsten
Fluorescent
Use this setting for incandescent lighting.
Use this setting for fluorescent lighting.
Manual
To set the white balance manually.
Brightness
Manual
To set brightness manually.
Sharpness
Manual
To set sharpness manually.
Contrast
Manual
To set contrast manually.
1.3M
Resolution
Medium
Low
Self-Timer
Multiple Shots
For 1.3-megapixel picture resolution.
Your phone’s picture storage area is called My Albums. There
are two types of folders in My Albums:
䢇 In Phone (see “In Phone Folder” below)
䢇 Online Albums (see page 80)
In Phone Folder
Your phone’s internal storage area is called the In Phone folder.
From the In Phone folder, you can view all the pictures you have
stored there, send items to the picture messaging website
(www.plspictures.com), delete files, and access additional
options.
To review your stored pictures in the In Phone folder:
䊳
Press
> My Albums > In Phone.
For medium picture resolution.
For low picture resolution.
Numeric countdown will appear when the
self-timer has been activated.
Use this setting for multiple shots.
2G. Camera
75
Camera
Function
In Phone Folder Options
When you are viewing the In Phone folder, press OPTIONS
(right softkey) to display the following options:
䢇 Send Media to send your pictures. (See “Sending Pictures
From the In Phone Folder” on page 78.)
䢇 Upload to upload pictures from the In Phone folder to the
picture messaging website (www.plspictures.com).
(Depending on your settings, the system may prompt you to
accept a data connection.) Choose from the following
options:
䡲 Selected to upload the selected item(s). Press
to
select an item. (The box on the lower right corner will be
checked.)
䡲 All to upload all pictures in the In Phone folder.
Note
76
If this is the first time you have accessed the picture
messaging website, the system will prompt you to
register your account. See “Registering Your Picture
Messaging Account” on page 77.
2G. Camera
䢇
䢇
Set as to select from these options:
䡲 Picture ID to assign the picture to a Contacts entry.
Highlight an entry and press twice to assign the
picture.
䡲 Screensaver to assign the picture as a screen saver.
Press to assign the picture.
Delete to delete pictures. Select This, Selected, or All.
Note
䢇
Deleting pictures will free up memory space in your
phone to enable you to take more pictures. Once
deleted, you cannot upload pictures to your online
picture messaging account.
Details/Edit to edit or display details relating to your
pictures.
䡲 Text Caption to edit the selected picture’s caption.
䡲 Special Effects to select from Fun Frames, Color
Tone, Fun Stamps, or Rotate.
䡲 Resize to resize the selected picture. Select Medium640x480 or Low-320x240.
䡲 Trimming to crop the selected picture.
䡲 Picture Info to display information such as the picture’s
caption, time/date, and size.
䢇
䢇
䡲 Full Screen to display the selected picture fullscreen.
Slideshow to view your pictures in slideshow mode (only
available when you save two or more pictures to the folder).
Album List to display the album list.
Camera Mode to activate camera mode.
Sending Pictures
Once you have taken a picture, you can use the messaging
capabilities of your phone to instantly share it with family and
friends.You can send pictures to up to 25 people at a time
using their email addresses or their phone numbers.
Registering Your Picture Messaging
Account
The first time you use any of the picture management options
involving the picture messaging website, you will be prompted
to register your picture messaging account and establish a
password through your phone.This password will also allow
you to sign in to the picture messaging website at
www.plspictures.com to access and manage your uploaded
pictures and albums.
1. Press
> My Albums > Online Albums.
(You will be prompted to register your picture messaging
account.)
Note
If your service plan does not include picture messaging,
you will first be prompted to subscribe to the service for
an additional monthly charge.
2. Enter a password for your picture messaging account and
press . (You will be prompted to confirm your
password.)
3. Please wait while the system creates your account.
Tip
Camera
䢇
Write down your picture messaging password in a
secure place.
Once you have received confirmation that your account has
been successfully registered, you may upload and share
pictures and access the picture messaging website.
2G. Camera
77
Sending Pictures From the In Phone Folder
7. To set the priority, scroll to the Priority field, and then select
1. Press
> My Albums > In Phone.
2. Highlight a picture to send and press . (You can select
8. Confirm the recipients, message, voice memo, and
3.
4.
5.
6.
78
multiple pictures.)
Press OPTIONS (right softkey) > Send Media.
Select the recipient from the list or from the following
options.
䡲 Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a wireless
phone number or an email address.)
䡲 MULTIPLE (left softkey) to select multiple recipients.
Press CONTINUE (left softkey) when you have finished
entering recipients. (You may include up to 25 recipients
per message.)
䡲 NEW ADDRESS (right softkey) to enter a recipient’s
wireless phone number or email address directly. Press
CONTINUE (left softkey) to proceed.
If you wish to include a text message, scroll to the Text
field, and then enter your message.
If you wish to include a voice message, scroll to the Audio
field, and then press RECORD (right softkey) > to
record. (Maximum recording time is 10 seconds.)
2G. Camera
High, Normal, or Low.
pictures. (You may also select additional options by
pressing the right softkey. Follow the onscreen
instructions to add available options.)
9. Press SEND (left softkey) to send the pictures.
Sending Pictures From the Messages Menu
You can also send picture messages from your phone’s
Messages menu.
1. From standby mode, press MESSAGES (left softkey) >
Send Message > Picture Msg.
2. Select the recipient from the list or from the following
options.
䡲 Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a wireless
phone number or an email address.)
䡲 MULTIPLE (left softkey) to select multiple recipients.
Press CONTINUE (left softkey) when you have finished
entering recipients. (You may include up to 25 recipients
per message.)
3.
4.
5.
6.
7.
wireless phone number or email address directly. Press
CONTINUE (left softkey) to proceed.
Select a picture from In Phone or Online Albums and
press > NEXT (left softkey). (You can also choose to
take a new picture.)
If you wish to include a text message, scroll to the Text
field, and then enter your message.
If you wish to include a voice message, scroll to the Audio
field, and then press RECORD (right softkey) > to
record. (Maximum recording time is 10 seconds.)
To set the priority, scroll to the Priority field, and then select
High, Normal, or Low.
Confirm the recipients, message, voice memo, and
pictures. (You may also select additional options by
pressing the right softkey. Follow the onscreen
instructions to add available options.)
8. Press SEND (left softkey) to send the pictures.
Viewing Picture Messages
When you receive a picture message, a notification will
automatically be displayed on your phone’s screen. Use
your softkeys to view picture messages.
– or –
1. From standby mode, press MESSAGES (left softkey) >
Picture Msg.
2. Select Inbox.
3. Highlight a message and press . (To display the
message options, press OPTIONS [right softkey].)
To reply to a picture message:
1. While the message is displayed, press OPTIONS (right
softkey) > Reply with > Text Message.
2. Compose a message and press SEND (left softkey).
– or –
1. From standby mode, press MESSAGES (left softkey) >
Picture Msg.
2. Select Inbox.
3. Highlight a message to which you want to reply and press
OPTIONS (right softkey) > Reply with > Text Message.
4. Compose a message and press SEND (left softkey).
䊳
2G. Camera
79
Camera
䡲 NEW ADDRESS (right softkey) to enter a recipient’s
Managing Pictures
Uploading Pictures
Picture Messaging Website
1. Press
> My Albums > In Phone.
2. Check the picture(s) you wish to upload and press
Once you have uploaded pictures to your online picture
messaging account at www.plspictures.com (see “In Phone
Folder Options” on page 76), you can use your computer to
manage your pictures. From the picture messaging website,
you can share pictures, edit album titles, add captions, and
organize images.You can even send your pictures to be printed
at participating retail locations.
You will also have access to picture management tools to
improve and customize your pictures.You’ll be able to lighten,
darken, crop, add antique effects, add comic bubbles and
cartoon effects, and use other features to transform your
pictures.
To access the picture messaging website:
1. From your computer’s Internet connection, go to
www.plspictures.com.
2. Enter your phone number and picture messaging password
to register. (See “Registering Your Picture Messaging
Account” on page 77.)
80
2G. Camera
OPTIONS (right softkey) > Upload.
3. Select Selected or All.
4. Select “Uploads” Area or Other Albums.
Managing Online Pictures From Your Phone
Use your phone to manage, edit, or share pictures you have
uploaded to the picture messaging website.
1. Press
> My Albums > Online Albums.The
Uploads folder and your albums are displayed.
2. Select Uploads or an available album title and press
display.Thumbnail pictures, up to eight per screen, are
displayed.
Tip
To expand a selected picture from thumbnail to fullscreen, press EXPAND (left softkey).
to
display your online picture options.
䡲 Send Media to send your picture.
䡲 Set as to assign the picture.
䡲 Save to Phone to download the pictures to the In Phone
folder.
䡲 Delete to delete pictures/videos saved in the current
album (or the Uploads folder).
䡲 Copy/Move to copy or move pictures/videos to a
selected album.
䡲 Details/Edit to edit or display details relating to your
pictures/videos.
䡲 Media Filter to filter only pictures, only videos, or to
display all media files.
䡲 Album List to display the album list.
Managing Online Albums
1. Press
> My Albums > Online Albums.
2. Highlight an album (or the Uploads folder) and press
OPTIONS (right softkey).
3. Highlight an option and press
.
䡲 Edit/Delete to select an option from the following:
Delete Album to delete the selected album.
Rename Album to rename the selected album.
䢇 Album Info to display detailed information about the
album.
䡲 Create New Album to create a new album. Enter a new
album name and press > SAVE (left softkey).
䢇
䢇
Note
The Uploads folder cannot be deleted or renamed.
2G. Camera
81
Camera
3. Highlight a picture and press OPTIONS (right softkey) to
Turning Bluetooth On and Off
2H. Bluetooth
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
About Bluetooth (page 82)
Turning Bluetooth On and Off (page 82)
Making Your Phone Discoverable (page 82)
Bluetooth Menu (page 83)
Bluetooth Settings Menu (page 84)
Bluetooth Profiles (page 85)
Pairing Bluetooth Devices (page 86)
Trusted List Options (page 86)
Sending Data via Bluetooth (page 87)
Printing Data via Bluetooth (page 87)
About Bluetooth
Bluetooth® is a short-range communications technology that
allows you to connect wirelessly to a number of Bluetooth
devices, such as headsets and hands-free car kits, and
Bluetooth-enabled handhelds, computers, printers, and
wireless phones.The Bluetooth communication range is
usually up to approximately 30 feet.
82
2H. Bluetooth
By default, your phone’s Bluetooth feature is turned off.Turning
Bluetooth on enables your phone’s Bluetooth functions.
1. Press > Settings > Bluetooth > On/Off.
2. Select On to enable Bluetooth. Select Off to disable
Bluetooth.
Making Your Phone Discoverable
To make your phone discoverable (allowing other Bluetooth
devices to detect it), you must set your phone’s visibility to other
than Hidden.
1. Press > Settings > Bluetooth > Visibility.
2. Select Always Visible or Visible for 3 min. If you select
Always Visible, your phone will be discoverable by all
in-range Bluetooth devices until you change the setting. If
you select Visible for 3 min, your phone will return to
hidden mode after three minutes.
The following icons show your Bluetooth connection status at a
glance:
– Bluetooth feature is on.
– Your phone is visible to other Bluetooth devices.
– Your phone is connected to a Bluetooth device.
Above icons will blink while your phone is communicating with a
Bluetooth device.
Bluetooth Menu
The Bluetooth menu allows you to access your phone’s
Bluetooth functions.
䊳
Press > Bluetooth to select from the following
options.
䡲 Handsfree Pairing to find a Bluetooth headset or
hands-free device and add it to your Trusted List.
䡲 Send Contact to send a Contacts entry saved on your
phone to another Bluetooth device.
䡲 Print Picture to print pictures using a Bluetoothenabled printer.
䡲 Add to Trusted to add a Bluetooth device to your
Trusted List. (You can specify the type of device to search
for.)
䡲 Trusted List to display a list of trusted Bluetooth
devices. Select Add New to find another Bluetooth
device.
䡲 Send Biz Card to send your phone’s information to
another Bluetooth device.
䡲 More... to display additional options (Settings or Block
List). (See page 84.)
Find Me
Find Me makes your phone temporarily visible to other
Bluetooth devices even if your phone’s current visibility setting
is Hidden or Visible for 3 min.
1. Press > Bluetooth > FIND ME (left softkey).Your
phone will be visible for three minutes.
2. If your phone receives a request from the Bluetooth device
that you wish to connect to, follow the onscreen prompts to
enter your passkey and press .
Bluetooth
Bluetooth
Bluetooth Status Indicators
After three minutes have passed, your phone will reset to
Hidden status.
2H. Bluetooth
83
Block List
You can prevent specific Bluetooth devices from connecting
with your phone.
To add a device to the Block List:
1. Press > Bluetooth > More... > Block List.
2. Select Add New.
3. Select Search or View Trusted.
䡲 Search to search for devices to be added to the Block
List.
䡲 View Trusted to remove a device from the Trusted List
and add it to the Block List.
4. Highlight a device you want to add to the Block List and
press BLOCK (left softkey).
Block List Options
From the Block List, press OPTIONS (right softkey) to display
the following options.
䡲 Device Info to display the device’s information.
䡲 Unblock to remove the device from the Block List.
䡲 Edit Name to edit the name of the device.
䡲 Sort by to sort the devices.
䡲 Help to display the Block List help.
84
2H. Bluetooth
Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many of
the characteristics of your phone’s Bluetooth service,
including:
䢇 Setting your phone’s visibility (or “discoverability”) for other
Bluetooth devices.
䢇 Entering or changing the name your phone uses for
Bluetooth communication.
䢇 Displaying your phone’s Bluetooth information.
䢇 Displaying your Bluetooth trusted device list.
䢇 Choosing a device for your Bluetooth calls.
To access the Bluetooth Settings menu:
1. Press > Settings > Bluetooth.
2. Highlight an option and press .
䡲 On/Off
to enable or disable Bluetooth.
䡲 Visibility to set your Bluetooth visibility.
䡲 Device Name to set a Bluetooth name for your phone.
䡲 Device Info to display your phone’s Bluetooth name,
address, class, and available services.
䢇
devices.
䡲 Voice Priority to choose a device for your Bluetooth
call. Select Device Answer to use your phone or a
Bluetooth device whichever you use first for your call.
䢇
Bluetooth Profiles
All the Bluetooth settings you configure are stored in your
phone’s Bluetooth user profile.You can use different profiles for
specific Bluetooth functions.
䢇 HSP: Headset Profile – This profile functions as a wireless
ear jack.When an incoming call is received, the ringer can
be heard through the headset instead of through the phone.
The call can then be received by pushing a button on a
headset.While using the phone, you can use the headset
instead of the phone by pushing a button on the headset.
Increase or decrease the volume by using the volume button
on the side of the phone.
䢇
䢇
䢇
HFP: Hands-Free Profile – This profile functions as a
wireless car kit. Incoming calls ring to the hands-free device
and a phone. Calls can be received by pressing a button on
the device. Increase or decrease the volume by using the
volume button on the side of the phone.
OPP: Object Push Profile – This profile uses the Generic
Object Exchange Profile services to send data objects
between devices and can be used to exchange Contacts
(vContacts) and business cards (vCard).
GOEP: Generic Object Exchange – This profile defines the
requirements for Bluetooth devices necessary for the
support of object exchange usage models such as
synchronization, file transfer, or object push.
PBAP: Phone Book Access Profile – This profile enables
exchange of Contacts information between devices. It is
typically used between a car kit and a mobile phone to allow
the car kit to display the name of the incoming caller.
BPP: Basic Printing Profile – This profile enables simpler
printing from your phone to a Bluetooth-enabled printer.
Bluetooth
Bluetooth
䡲 Trusted List to display a list of trusted Bluetooth
2H. Bluetooth
85
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth
device.When devices are paired, a passkey is shared between
devices, allowing for fast, secure connections while bypassing
the discovery and authentication process.
1. Press > Bluetooth.
2. Highlight an option and press
.
䡲 Handsfree Pairing to find a headset or hands-free
device.
䡲 Add to Trusted to find a device per device type. Select a
device type to be searched.
䡲 Trusted List to find all device types. Select Add New to
start searching.
3. Highlight a device and press
4. Enter the passkey and press
.
.When the owner of the
other device enters the same passkey, the pairing is
complete.
86
2H. Bluetooth
Note
Due to different specifications and features of other
Bluetooth compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible.
Trusted List Options
Once you have created paired devices, several options are
available from the trusted list.
1. Press > Bluetooth > Trusted List.
2. Highlight a device and press OPTIONS (right softkey) to
display the following options:
䡲 Connect or Disconnect to connect to or disconnect
from the Bluetooth device (if applicable).
䡲 Send Item to send an item saved on your phone to
another Bluetooth device (if applicable).
䡲 Print to print an item using a Bluetooth-enabled printer
(if applicable).
䡲 Edit Name to edit the name of the trusted device.
䡲 Auto-Accept to configure your phone’s accessibility to
other Bluetooth devices.
䡲 Device Info to display the trusted device’s information.
by to sort the trusted devices.
䡲 Delete to delete the selected device from the list.
䡲 Delete All to delete all devices from the list.
䡲 Settings to display the Bluetooth settings menu. (See
page 84.)
䡲 Help to display the assisting information.
Sending Data via Bluetooth
You can send data saved on your phone to another Bluetooth
device.
1. Press > Bluetooth > Trusted List.
2. Highlight the device from the trusted list and then press
TRANSFER (left softkey).
3. Highlight an item and press .
4. Follow the onscreen instructions to select the item(s) to
send.
5. Make sure the other device is ready to receive data, and
then press SEND (left softkey).
6. If necessary, enter the passkey and press .
Printing Data via Bluetooth
You can print out your pictures, Contacts entries, business
cards, calendar events, and messages stored on your phone.
(Some Bluetooth-enabled printers may not support this
feature.)
1. Press > Bluetooth > Trusted List.
2. Highlight the device from the trusted list and then press
OPTIONS (right softkey) > Print.
3. Highlight a category (Picture, Business Card,
Contacts, Calendar Event, or Message) and press
.
4. Follow the onscreen instructions to select the item(s) to
print.
5. Select Handset Default, Create Print Job, or
Printer Default.
䡲 Handset Default to print items except pictures by
creating a print job via the Basic Printing Profile.
䡲 Create Print Job to print pictures by creating a print job
via the Basic Printing Profile.
䡲 Printer Default to print items using the default printer
settings via the Object Push Profile.
2H. Bluetooth
87
Bluetooth
Bluetooth
䡲 Sort
6. Make sure the printer is ready to print data, and then press
PRINT (left softkey).
7. If necessary, enter the PIN and press
Note
88
.
Before using the Bluetooth feature, make sure your
phone’s battery is fully charged.
2H. Bluetooth
Section 3
Wireless Service
2. Follow the system prompts to:
3A. Wireless Service:
The Basics
⽧
⽧
⽧
⽧
⽧
⽧
⽧
Voicemail (page 90)
Text Messaging (SMS) (page 93)
Caller ID (page 96)
Call Waiting (page 97)
Making a Three-Way Call (page 97)
Call Forwarding (page 98)
Roaming (page 98)
Voicemail
Setting Up Your Voicemail
Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off.You should
set up your voicemail and personal greeting as soon as your
phone is activated.
1. From standby mode, press and hold .
90
3A. Wireless Service: The Basics
䡲 Create your passcode.
䡲 Record your name announcement.
䡲 Record your greeting.
䡲 Choose whether to activate One-Touch Message Access
(a feature that lets you access messages simply by
pressing and holding , bypassing the need for you to
enter your passcode).
Note
Voicemail Passcode
It is strongly recommended that you create a passcode
when setting up your voicemail to protect against
unauthorized access.Without a passcode, anyone who
has access to your handset is able to access your
voicemail messages.
Voicemail Notification
There are several ways your phone alerts you to a new
message:
䢇 By displaying a message on the screen.
䢇 By sounding the assigned ringer type.
䢇 By displaying
at the top of the screen.
Retrieving Your Voicemail Messages
When you receive a new voicemail, your phone alerts you and
prompts you to call your voicemail.
You can review your messages directly from your wireless
phone or from any other touch-tone phone.
To dial from your wireless phone, either speed dial your
voicemail or use the menu keys.
To call your voicemail from the notification screen:
䊳
Press
Note
.
When you are roaming off the home network, you may
not receive notification of new voicemail messages. It is
recommended that you periodically check your
voicemail by dialing 1 + area code + your wireless
phone number.When your voicemail answers, press
( ) and enter your passcode.You may be charged
roaming rates when you access voicemail while
roaming off the home network.
Wireless
Wireless Service
Service
New Voicemail Message Alerts
One-Touch Message Access
䊳
Press and hold
box.)
. (Your phone will dial your voicemail
Using the Menu Keys on Your Phone
*
1. From standby mode, press MESSAGES (left softkey) >
Your phone accepts messages even when it is turned
off, but you can receive voicemail message alerts only
when your phone is turned on and you are in a network
service area.
2. Press
Voicemail.
Note
to listen to your messages.
You are charged for airtime minutes when you are
accessing your voicemail from your wireless phone.
3A. Wireless Service: The Basics
91
Using Another Phone
Voicemail Key Guide
1. Dial your wireless phone number.
2. When your voicemail answers, press the star (*) key.
3. Enter your passcode.
Here’s a quick guide to your keyboard functions while listening
to voicemail messages.
Tip
When you call into voicemail, press 4 to skip the header
information and go straight to the message.
Clearing the Message Icon
Normally, the message icon will go away after you have called
your voicemail and listened to your message(s).You can also
clear the message icon manually without calling in to your
voicemail.
䊳
92
From standby mode, press MESSAGES (left softkey) >
Voicemail > Reset Indicator > YES (left softkey).
3A. Wireless Service: The Basics
Date/Time
Send Reply
Advance
Replay
Rewind
Forward
Delete
Return Call
Save
Cancel
Help
Skip
With text messaging (SMS), you can send and receive text
messages between your phone and another messaging-ready
phone.When you receive a new message, it will automatically
display on your phone’s screen.
In addition, text messaging includes a variety of preset
messages, such as “The meeting has been cancelled,” that
make composing messages fast and easy. Use your phone to
customize your own preset messages (up to 50 characters).
Text messages can be composed of up to six segments of 160
characters each, for a total of 960 characters per text
message.The current segment and total segment count is
displayed at the top of each segment. For example, (5/6) at the
top of a segment would indicate you are viewing segment five of
a six-segment message.
Note
See your service plan for applicable charges for text
messaging.
Composing Text Messages
Wireless
Wireless Service
Service
Text Messaging (SMS)
1. Press .
2. Select a recipient from the list or from the following
options.
䡲 Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a phone number
or an email address.)
䡲 MULTIPLE (left softkey) to select multiple recipients.
Press CONTINUE (left softkey) when you have finished
entering recipients. (You may include up to 25 recipients
per message.)
䡲 NEW ADDRESS (right softkey) to enter a recipient’s
phone number or email address directly. Press
CONTINUE (left softkey) to proceed.
3. Compose a message.
䡲 Press OPTIONS (right softkey) to select additional
options.
4. Review your message and press SEND (left softkey).
3A. Wireless Service: The Basics
93
Viewing Text Messages
䊳
When you receive a text message, it will be displayed
automatically on your phone’s screen. Use your navigation
key to scroll down and view the entire message.
Tip
If you have two or more notifications, the Missed Alerts
list will appear. Highlight a message in the list and press
VIEW (left softkey) to view the message.
To reply to a text message:
1. While the message is open, press REPLY (left softkey).
2. Compose a reply and press SEND (left softkey).
Threaded Messaging
Threaded messaging lets you follow a chain of text messages
to and from a particular contact.
To display the thread list:
䊳
From standby mode, press MESSAGES (left softkey) >
Text Messages.
You will see a thread list. Each thread has an entry’s name (if
saved in Contacts), a phone number, or an email address.You
will also see the number of unread messages, if any, for each
thread.
When you highlight a thread, you will see the first few words of
the most recent message in that thread.
94
3A. Wireless Service: The Basics
Message Details
Highlight a thread and press to display the messages sent
to and received from a particular number, in reverse
chronological order. Pending, unsent, and draft messages also
are listed.
Highlight a message and press to display the message
details and view the entire message.
Highlight a message to see details for that message.
Entry’s name, phone
number, or email address –
Message you received.
Me – Message you sent.
䡲 Me (Failed) – Message you did not send successfully.
You can select certain information from a text message or
email message and automatically save it or use it in a related
application. See “Simple Data Exchange” on page 27.
Threaded Messaging Options
When you are viewing a messaging thread list, a message
thread, or a message details screen, you can choose from
among the following options. (Options will vary according to
screen.)
䊳
Press
䊳
Press SEND MESSAGE (left softkey) to send a message
to the entry.
䊳
Press REPLY (left softkey) to reply to a message.
䊳
Press SEND (left softkey) to send a draft message.
䊳
Press RESEND (left softkey) to resend a failed message.
䡲 Me (Pending) – Message you have not sent yet because
your phone has no network connection.The message
will be sent automatically when your phone reconnects
to the network.
䡲 Me (Draft) – Message you saved as a draft. Only one
draft can be saved, and appears at the top of the thread.
Wireless
Wireless Service
Service
Viewing Messages
or
to make a call to the entry.
3A. Wireless Service: The Basics
95
䊳
Select a message, press OPTIONS (right softkey) and
select an option.
䡲 Forward to forward the selected message.
䡲 Lock/Unlock to lock/unlock the selected message.
Note
Text messages are automatically deleted starting with
the oldest.To save messages, lock them.
䡲 Delete to delete the selected message. Delete All to
delete all messages.
䡲 Save Number to save phone numbers appearing in the
selected message.
䡲 Save Email to save email addresses appearing in the
selected message.
䡲 Print to print the selected message.
䡲 Settings to display the Messaging Settings menu.
96
3A. Wireless Service: The Basics
Caller ID
Caller ID allows people to identify a caller before answering the
phone by displaying the number of the incoming call. If you do
not want your number displayed when you make a call, follow
these steps.
1. Press
.
2. Enter the number you want to call.
3. Press .
To permanently block your number, contact your service
provider.
Making a Three-Way Call
When you are on a call, Call Waiting alerts you to incoming calls
by sounding two beeps.Your phone’s screen informs you that
another call is coming in and displays the caller’s phone
number (if available).
With Three-Way Calling, you can talk to two people at the same
time.When using this feature, the normal airtime rates will be
charged for each of the two calls.
To respond to an incoming call while you’re on a call:
䊳
Press . (This puts the first caller on hold and answers
the second call.)
– or –
Press IGNORE (right softkey) to ignore the second call.
To switch back to the first caller:
䊳
Press
Tip
again.
For those calls where you don’t want to be interrupted,
you can temporarily disable Call Waiting by pressing
7 0 before placing your call. Call Waiting
automatically reactivates once you end the call.
1. Enter a number and press .
2. Once you have established the connection, press
.
(This puts the first caller on hold.)
3. Select Contacts, Recent History, or Enter Phone#.
4. Select a number from your Contacts or Recent History, or
enter a number directly, and then press
.
5. When you’re connected to the second party, press
again or JOIN (right softkey) to begin your three-way call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all callers are disconnected.
*
3A. Wireless Service: The Basics
97
Wireless
Wireless Service
Service
Call Waiting
Call Forwarding
Roaming
Call Forwarding lets you forward all your incoming calls to
another phone number – even when your phone is turned off.
You can continue to make calls from your phone while Call
Forwarding is being activated.
Roaming Icon
To activate Call Forwarding:
1. Press
.
2. Enter the area code and phone number to which you want
Your phone’s display screen always lets you know when you’re
off the home network.Anytime you are roaming, the phone
displays the roaming icon (
).
Tip
your calls forwarded.
3. Press
. (You will hear a tone to confirm the activation of
Call Forwarding.)
To deactivate Call Forwarding:
1. Press
2. Press
.
. (You will hear a tone to confirm the
deactivation.)
Roaming on Other Networks
When you’re roaming on other networks, your call quality and
security will be similar to the quality you receive when making
calls on the home network. However, you may not be able to
access certain features, such as data services, depending on
the available network.
Note
Note
98
You are charged a higher rate for calls you have
forwarded.
3A. Wireless Service: The Basics
Remember, when you are using your phone off the
home network, always dial numbers using 11 digits
(1 + area code + number).
If you’re on a call when you leave the home network,
your call is dropped. If your call is dropped in an area
where you think network service is available, turn your
phone off and on again to reconnect to the network.
Setting Roam Mode
When you are roaming off the home network, you may not
receive on-phone notification of new voicemail messages.
Callers can still leave messages, but you will need to
periodically check your voicemail for new messages if you are
in a roaming service area for an extended period of time.
Your phone allows you to control your roaming capabilities. By
using the Roaming menu option, you can determine which
signals your phone accepts.
1. Dial 1 + area code + your phone number.
2. When you hear your voicemail greeting, press .
3. Enter your passcode at the prompt and follow the voice
prompts.
When you return to the home network, voicemail notification
will resume as normal.
Wireless
Wireless Service
Service
Checking for Voicemail Messages While Roaming
Choose from two different settings on your phone to control
your roaming experience.
1. Press
> Settings > More... > Roaming > Set
Mode.
2. Highlight an option and press
.
䡲 Home Only to access only the home network and
prevent roaming on other networks.
䡲 Automatic to seek service on the home network.When
network service is unavailable, the phone searches for
an alternate service.
3A. Wireless Service: The Basics
99
Call Guard
Your phone has two ways of alerting you when you are roaming
off the home network: the onscreen roaming icon and Call
Guard. Call Guard makes it easy to manage your roaming by
requiring an extra step before you can place or answer a
roaming call. (This additional step is not required when you
make or receive calls while on the home network.)
To answer incoming roaming calls with Call Guard on:
1. Press .
2. Read the message and press .
Note
If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.
To turn Call Guard on or off:
Data Roam Guard
1. Press
Depending on service availability and roaming agreements,
your phone may be able to access data services while roaming
on certain other networks.You can set your phone to alert you
when you are roaming off the home network and try to use data
services such as messaging.
> Settings > More... > Roaming >
Call Guard.
2. Select On or Off.
Note
Call Guard is turned on by default on your phone.
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number and press .
2. Read the message and press .
100
3A. Wireless Service: The Basics
To set your Data Roam Guard notification:
1. Press
> Settings > More... > Roaming >
Data Roaming.
2. Highlight an option and press
.
䡲 Always Ask (default mode) sets your phone’s Data
Roam Guard feature on.You will see a prompt that will
require you to respond anytime you access data services
while roaming.
Ask turns your phone’s Data Roam Guard feature
off.Your phone will not notify you of your roaming status
when you access data services.
Wireless
Wireless Service
Service
䡲 Never
To use data services when Data Roam Guard is active:
䊳
When a notification appears informing you that data roam
charges may apply, press ROAM (left softkey) to connect.
3A. Wireless Service: The Basics
101
Your User Name
3B. Web and Data Services
⽧
⽧
⽧
⽧
Getting Started With Data Services (page 102)
Accessing Messages (page 105)
Downloading Content (page 106)
Browser Menu (page 108)
Getting Started With Data Services
With your wireless phone and data services, you are ready to
start enjoying the advantages of data services.This section will
help you learn the basics of using your data services, including
managing your user name, launching a data connection, and
navigating the Web with your phone.
102
3B. Web and Data Services
When you buy your phone and sign up for service, you’re
automatically assigned a user name, which is typically based on
your 10-digit wireless phone number.
When you use data services, your user name is submitted to
identify you to the network.
Your user name will be automatically programmed into your
phone.You don’t have to enter it.
Finding Your User Name
If you are not sure what your user name is, you can easily find it
on your phone.
䊳
Press
> Settings > Phone Info > Phone#/User ID.
Launching a Web Connection
䊳
Press > Web. (Your data connection starts and you
see the home page.)
Note
If Net Guard is enabled and displayed (see next topic),
press OK (left softkey) to continue and launch the Web.
To change your Net Guard settings:
䊳
Press > Settings > More... > Web > Net Guard.
䡲 On to activate the Net Guard.
䡲 Off to deactivate the Net Guard.
Note
When enabled, Net Guard appears only once as long as
you have not turned the phone off and on.
While connecting, you may see an animation.
To change the default launch page to the last page
you viewed, press TOOLBAR (right softkey) and
select Options > Advanced > Startup Page >
Last Page Viewed.
Net Guard
When you first connect to the Web, the Net Guard will be
displayed to confirm that you want to connect.The Net Guard
helps you avoid accidental connections.You can disable the
Net Guard in the future by selecting Always Auto-Connect
when you see Net Guard displayed.
Data Connection Status and Indicators
Web and Data
Tip
Your phone displays the current status of your data connection
through indicators at the top of the screen.The following
symbols are used:
You are connected to the 1xRTTdata network. Data is
being transferred (for example, when you are opening a
Web page) and you cannot receive calls.
You are connected to the network but data is not
currently being transferred (for example, when you are
viewing a Web page that is completely open), and you
can receive calls.
If you do not see an indicator, your phone does not have a
current data connection.To launch a connection, see
“Launching a Web Connection” on this page.
3B. Web and Data Services
103
Navigating the Web
Scrolling
Navigating through menus and websites during a data session
is easy once you’ve learned a few basics. Here are some tips
for getting around.
As with other parts of your phone’s menu, you’ll have to scroll
up and down to see everything on some websites.
䊳
Softkeys
During a data session, the bottom line of your phone’s display
screen contains one or more softkeys.These keys are shortcut
controls for navigating around the Web, and they correspond to
the softkeys directly below the phone’s display screen.
Tip
To scroll line by line through websites:
Depending on which websites you visit, the labels on
the softkeys may change to indicate their function.
Press the navigation key up and down.
Selecting
Once you’ve learned how to use softkeys and scroll, you can
start navigating the Web.
To select onscreen items:
䊳
Use the navigation key to highlight an item, and then press
the left softkey (or press ).
To use softkeys:
䊳
104
Press a softkey. (If an additional pop-up menu is displayed
when you press the softkey, select the menu items using
your keyboard [if they’re numbered], or by highlighting the
option and pressing .)
3B. Web and Data Services
Tip
You’ll find that the left softkey is used primarily for
selecting items.This softkey is often labeled “OK.”
If the items on a page are numbered, you can use your
keyboard (numbered keys) to select an item.
Links, which are displayed as underlined text, allow you to jump
to Web pages, select special functions, or even place phone
calls.
Accessing Messages
To select links:
䊳 Highlight the link and press the appropriate softkey.
You can send and receive email messages or instant messages
right from your phone. Messaging allows you to stay connected
24 hours a day anywhere on the home network.
Going Back
Email
To go back one page:
With data services, you can use popular email services such as
Yahoo!® Mail to keep in touch, even while you’re on the go.
Press
Note
on your phone.
You can also use the BACK key for deleting text (like a
BACKSPACE key) when you are entering text.
Going Home
To return to the home page from any other page:
䊳 Press and hold
.
– or –
Press TOOLBAR (right softkey) > My Homepage.
1. From the home page, select Messaging > Email.
2. Select an email provider.
3. Use your keypad to enter the required sign-in information
Web and Data
䊳
for the selected provider, such as user name, email
address, or password, and select Sign In. (Your mailbox
for the selected provider will be displayed.)
Note
The information required to sign in will vary depending
on the email provider you are accessing.
4. Follow the onscreen instructions to read, reply to,
compose, send, and manage your email account.
3B. Web and Data Services
105
Instant Messaging
Data services also provide you with access to popular instant
messaging (IM) clients, including Yahoo!¨ Messenger.
1. From the home page, select Messaging >
Instant Messaging.
2. Highlight an IM provider.
3. Use your keyboard to enter the required sign-in
information for the selected provider, such as user name
or password, and select Sign In. (You will see Your IM
screen for the selected provider.)
Note
The information required to sign in will vary depending
on the instant messaging provider you are accessing.
4. Follow the onscreen instructions to read, reply to,
compose, and send messages and manage your IM
account.
Downloading Content
You have access to a dynamic variety of downloadable content,
such as Games, Screen Savers, and other applications.
(Additional charges may apply.) Follow the basic steps below to
access and download these items.
Accessing the Download Menus
1. Press > My Stuff.
2. Select a download category (Games, Ringers,
Screen Savers, or Applications), and then select
Get New. (The browser will start and take you to the
corresponding download menu.)
To access the download menus from the Web browser:
1. From the home page, select Downloads.
2. Select Games, Ringers, Screen Savers, or
Applications to go to the corresponding download menu.
(For more information on navigating the Web, see
“Navigating the Web” on page 104.)
106
3B. Web and Data Services
Selecting an Item to Download
To download a selected item:
You can search for available items to download in a number of
ways:
䢇 Featured displays a selection of featured items.
䢇 Categories allows you to narrow your search to a general
category, such as Country or Pop/Rock for Ringers or For the
Ladies for Screen Savers. (There may be several pages of
available content in a list. Select Next 9 to view additional
items.)
䢇 Search allows you to use your keyboard to enter search
criteria to locate an item.You may enter an entire word or
title or perform a partial-word search.
1. From the information page, select Buy. (The item
Once you’ve selected an item you wish to download, highlight it
and press , or press OK (left softkey).You will see a
summary page for the item including its title, the vendor, the
download details, the file size, and the cost. Links allow you to
view the License Details page, which outlines the price,
license type, and length of license for the download, and the
Terms of Use page, which details the Premium Services
Terms of Use and your responsibility for payment.
Note
If you have not previously purchased an item, you will be
prompted to create your purchasing profile.
2. Select an option to continue:
䡲 Select Run/Listen/Play/View to assign the
downloaded item (or to start, in the case of a game or an
application).Your data session will end, and your phone
will redirect you to the appropriate phone menu screen.
䡲 Select Set as to assign a ringer or screen saver to a
phone function.
䡲 Select Settings to configure downloaded games or
applications.
䡲 Select Shop to browse for other items to download.
䡲 Press
to quit the browser and return to standby
mode.
3B. Web and Data Services
Web and Data
Downloading an Item
will download automatically.When you see the
New Download screen you have successfully
downloaded the item to your phone.)
107
Browser Menu
Although the home page offers a broad and convenient array of
sites and services for you to browse, not all sites are
represented, and certain functions, such as going directly to
specific websites, are not available. For these and other
functions, you will need to use the browser menu.The browser
menu offers additional options to expand your use of the Web
on your phone.
Opening the Browser Menu
You may open the browser menu anytime you have an active
data session, from any page you are viewing.
To open the browser menu:
䊳
Press TOOLBAR (right softkey). (You will see the browser
menu.)
Options available under the browser menu include:
My Homepage to return the browser to the home page.
䢇 My Pages to access and manage your favorites
(bookmarks).
䢇 Web Search to launch a Web search.
䢇
108
3B. Web and Data Services
䢇
Options to display additional options:
䢇 Set as Homepage to set the current page as your
homepage.
䢇 Font Size to change the font size for the browser.
䢇 Send This Page to... to send a URL via text messaging
(SMS).
䢇 Clear Private Data to delete the browser’s cache,
cookies, etc.
䢇 Help to show the help of the browser.
䢇 Advanced
䡲 Startup Page to change the default launch page.
䡲 Page Info to display information about the current page.
䡲 Images On/Off to display images on the Web page.
䡲 Reset Browser to reset the browser.
䡲 Turn On/Off Error Logging to set whether to save
error logs.
䡲 View Error Log to display the error log.
䡲 Send Referrer to send HTTP URL referrer information.
䡲 Redirect Prompt to display a prompt when your data is
being redirected.
䡲 Reset Browser Settings to reset all browser settings.
to display information about your
browser.
䡲 JavaScripting to enable or disable java scripting.
Going to a Specific Website
To go to a particular website by entering a URL (Web
address):
1. Open any Web page.
2. Press the navigation key up to highlight the address bar.
3. Use your keyboard to enter the URL of the website you
wish to go to and press
Note
.
Not all websites are viewable on your phone.
Creating a Favorite
Favorites (bookmarks) allow you to store the addresses of your
favorite websites for easy access at a later time.
1. Go to the Web page you want to add.
2. Press TOOLBAR (right softkey) to open the browser
menu.
3. Select My Pages.
4. Confirm that Add This Page to Favorites is highlighted
and press
.
Web and Data
䡲 About Browser
5. Press ADD (left softkey).
Note
Saving a page as a favorite does not store the page
contents, just its address.
Some pages cannot be saved as favorites, depending
on how a particular page was created.
3B. Web and Data Services
109
Accessing a Favorite
1. Press TOOLBAR (right softkey) to open the browser
menu.
2. Select My Pages.
3. Select a favorite and press
(or press the number
corresponding to the favorite you wish to access).
Deleting a Favorite
1. Press TOOLBAR (right softkey) to open the browser
menu.
2. Select My Pages.
3. Highlight a favorite and press OPTIONS (right softkey).
4. Select Remove This Favorite. (A confirmation will be
displayed.)
5. Press REMOVE (left softkey) to remove the favorite.
Reloading a Web Page
䊳
110
Press while the Refresh icon ( ) at the upper right
corner of the browser is highlighted.
3B. Web and Data Services
Section 4
Safety and Warranty
Information
4A. Important Safety
Information
⽧ General Precautions (page 112)
⽧ Maintaining Safe Use of and Access to Your Phone
⽧
⽧
⽧
⽧
⽧
(page 113)
Using Your Phone With a Hearing Aid Device
(page 114)
Caring for the Battery (page 115)
Radio Frequency (RF) Energy (page 117)
Owner’s Record (page 118)
User Guide Proprietary Notice (page 119)
This phone guide contains important operational and
safety information that will help you safely use your
phone. Failure to read and follow the information provided in
this phone guide may result in serious bodily injury, death, or
property damage.
112
4A. Important Safety Information
General Precautions
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
䢇
To maximize performance, do not touch the bottom portion of your phone
where the internal antenna is located while using the phone.
䢇
Speak directly into the mouthpiece.
䢇
Avoid exposing your phone and accessories to rain or liquid spills. If your
phone does get wet, immediately turn the power off and remove the
battery.
䢇
Do not expose your phone to direct sunlight for extended periods of time
(such as on the dashboard of a car).
䢇
Although your phone is quite sturdy, it is a complex piece of equipment
and can be broken.Avoid dropping, hitting, bending, or sitting on it.
䢇
Any changes or modifications to your phone not expressly approved in
this document could void your warranty for this equipment and void your
authority to operate this equipment.
Note
For the best care of your phone, only authorized personnel
should service your phone and accessories. Failure to do so may
be dangerous and void your warranty.
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee
connection in all conditions.Therefore you should never rely solely upon any
mobile phone for essential communication (e.g., medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain
network services or mobile phone features are in use. Check with your local
service provider for details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a handsfree device) is prohibited in some jurisdictions. Laws vary as to specific
restrictions. Remember that safety always comes first.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area.Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect inadequately
shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems or entertainment systems in motor vehicles.
Check with the manufacturer or their representative to determine if these
systems are adequately shielded from external RF signals.Also check with
the manufacturer regarding any equipment that has been added to your
vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately shielded
from external RF signals.
Note
Important Safety Information
Maintaining Safe Use of and Access
to Your Phone
Always turn off the phone in healthcare facilities, and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft.To prevent possible
interference with aircraft systems, the U.S. Federal Aviation Administration
(FAA) regulations require you to have permission from a crew member to use
your phone while the plane is on the ground.To prevent any risk of
interference, FCC regulations prohibit using your phone while the plane is in
the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off when in a
blasting area or in other areas with signs indicating two-way radios should
be turned off. Construction crews often use remote-control RF devices to set
off explosives.
Turn your phone off when you’re in any area that has a potentially explosive
atmosphere.Although it’s rare, your phone and accessories could generate
sparks. Sparks can cause an explosion or fire, resulting in bodily injury or
even death.These areas are often, but not always, clearly marked.They
include:
4A. Important Safety Information
113
䢇
Fueling areas such as gas stations.
䢇
Below deck on boats.
䢇
Fuel or chemical transfer or storage facilities.
䢇
Areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
䢇
Any other area where you would normally be advised to turn off your
vehicle’s engine.
Note
Never transport or store flammable gas, flammable liquids, or
explosives in the compartment of your vehicle that contains your
phone or accessories.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they could hurt
themselves and others, damage the phone or make calls that increase your
invoice.
Using Your Phone With a Hearing Aid
Device
A number of wireless phones have been tested for hearing aid device
compatibility.When some wireless phones are used with certain hearing
devices (including hearing aids and cochlear implants), users may detect a
noise which can interfere with the effectiveness of the hearing device.
114
4A. Important Safety Information
Some hearing devices are more immune than others to this interference
noise, and phones also vary in the amount of interference noise they may
generate.ANSI standard C63.19 was developed to provide a standardized
means of measuring both wireless phone and hearing devices to determine
usability rating categories for both.
Ratings have been developed for mobile phones to assist hearing device
users find phones that may be compatible with their hearing device. Not all
phones have been rated for compatibility with hearing devices. Phones that
have been rated have a label located on the box. Your SCP-2700 by
SANYO has an M4 and a T4 rating.
These ratings are not guarantees. Results will vary depending on the user’s
hearing device and individual type and degree of hearing loss. If a hearing
device is particularly vulnerable to interference noise; even a phone with a
higher rating may still cause unacceptable noise levels in the hearing device.
Trying out the phone with your hearing device is the best way to evaluate it
for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing
aid compatibility and are likely to generate less interference to hearing
devices than unrated phones. (M4 is the better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to
be more usable with a hearing device’s telecoil (“T Switch”or “Telephone
Switch”) than unrated phones. (T4 is the better/higher of the two ratings.
Note that not all hearing devices have telecoils in them.)
Hearing aid devices may also be measured for immunity to interference
noise from wireless phones and should have ratings similar to phones.Ask
your hearing healthcare professional for the rating of your hearing aid.Add
䢇
䢇
– or –
Press
Any combined rating equal to or greater than six offers
excellent use.
Any combined rating equal to five is considered normal use.
Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a
combined rating of six for “excellent use.” This is synonymous for T ratings.
It is further suggested you experiment with multiple phones (even those not
labeled M3/T3 or M4/T4) while in the store to find the one that works best
with your hearing aid device. Should you experience interference or find the
quality of service unsatisfactory after purchasing your phone, promptly
return it to the store where purchased for exchange or refund. More
information about hearing aid compatibility may be found at: www.fcc.gov,
www.fda.gov, and www.accesswireless.org.
Position the phone so the internal antenna is farthest from your hearing
aid.
䢇
Move the phone around to find the point with least interference.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
䢇
Recently there have been some public reports of wireless phone batteries
overheating, catching fire or exploding. It appears that many, if not all, of
these reports involve counterfeit or inexpensive, aftermarket-brand
batteries with unknown or questionable manufacturing standards.The
manufacturer is not aware of similar problems with manufacturer phones
resulting from the proper use of batteries and accessories approved by
the manufacturer of your phone. Use only manufacturer-approved
batteries and accessories found through your phone’s manufacturer.
Buying the right batteries and accessories is the best way to ensure
they’re genuine and safe.
䢇
Do not disassemble or open crush, bend or deform, puncture or shred the
battery.
To further minimize interference:
Set the phone’s display and keyboard backlight settings to ensure the
minimum time interval:
> Settings > Display > Main Screen >
Backlight.
1. Press
.
䢇
Getting the Best Hearing Device
Experience With Your Phone
䢇
> Settings > Display > Keypad Light.
2. Highlight the minimum time interval setting and press
䢇
Important Safety Information
the rating of your hearing aid and your phone to determine probable
usability:
4A. Important Safety Information
115
䢇
Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
Storing
䢇
Don’t store the battery in high temperature areas for long periods of time.
It’s best to follow these storage rules:
䢇
Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a
service center for inspection.
Less than one month:
-4° F to 140° F (-20° C to 60° C)
䢇
Improper battery use may result in a fire, explosion or other hazard.
Do not short circuit a battery or allow metallic conductive objects to
contact battery terminals.
More than one month:
-4° F to 113° F (-20° C to 45° C)
䢇
Disposal of Lithium Ion (Li-Ion) Batteries
䢇
Keep the metal contacts on top of the battery clean.
䢇
Promptly dispose of used batteries in accordance with local regulations.
䢇
Battery usage by children should be supervised.
䢇
Never dispose of the battery by incineration.
䢇
Do not handle a damaged or leaking Li-Ion battery as you can be burned.
䢇
For safe disposal options of your Li-Ion batteries, contact your nearest
authorized service center.
Charging
䢇
In order to avoid damage, charge the battery only in temperatures that
range from 32° F to 113° F (0° C to 45° C).
䢇
Don’t use the battery charger in direct sunlight or in high humidity areas,
such as the bathroom.
䢇
The battery may need recharging if it has not been used for a long period
of time.
䢇
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
116
4A. Important Safety Information
Special Note: Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash may be prohibited.
For more information about RF exposure, visit the FCC website at
www.fcc.gov.
Understanding How Your Phone Operates
Specific Absorption Rates (SAR) for Wireless
Phones
Your phone is basically a radio transmitter and receiver.When it’s turned on,
it receives and transmits radio frequency (RF) signals.When you use your
phone, the system handling your call controls the power level.This power
can range from 0.006 watt to 0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described
below.
In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and
the American National Standards Institute (ANSI) joined in updating ANSI’s
1982 standard for safety levels with respect to human exposure to RF
signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993,
the Federal Communications Commission (FCC) adopted this updated
standard in a regulation. In August 1996, the FCC adopted hybrid standard
consisting of the existing ANSI/IEEE standard and the guidelines published
by the National Council of Radiation Protection and Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use the supplied or approved carrying case, holster or
other body-worn accessory. If you do not use a body-worn accessory, ensure
the antenna is at least 0.866 inches (2.2 centimeters) from your body when
transmitting. Use of non-approved accessories may violate FCC RF exposure
guidelines.
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and
calculation process. It does not represent how much RF the phone emits.All
phone models are tested at their highest value in strict laboratory settings.
But when in operation, the SAR of a phone can be substantially less than the
level reported to the FCC.This is because of a variety of factors including its
proximity to a base station antenna, phone design and other factors.What is
important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety.As stated above, variations in SAR values between different
model phones do not mean variations in safety. SAR values at or below the
federal standard of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the SCP-2700 by SANYO¨ are:
Cellular CDMA mode (Part 22):
Head: 1.25 W/kg; Body-worn: 0.647 W/kg
PCS mode (Part 24):
Head: 1.16 W/kg; Body-worn: 0.524 W/kg
4A. Important Safety Information
117
Important Safety Information
Radio Frequency (RF) Energy
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number:V65SCP-27H.
More information on the phone’s SAR can be found from the following FCC
website: http://www.fcc.gov/oet/ea/.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation.
118
4A. Important Safety Information
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
䢇
Reorient the direction of the internal antenna.
䢇
Increase the separation between the equipment and receiver.
䢇
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
䢇
Consult the dealer or an experienced radio/TV technician for help.
Owner’s Record
The model number, regulatory number, and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below.This will be helpful if you need to contact us about
your phone in the future.
Model: SCP-2700 by SANYO¨
Serial No.:
Important Safety Information
User Guide Proprietary Notice
XT9 Mobile Interface is licensed under one or more of: U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554, U.S. Pat. 6,307,548, U.S. Pat.
6,286,064, U.S. Pat. 6,307,549, U.S. Pat. 6,801,190, U.S. Pat. 7,030,863,
U.S. Pat. 7,088,345, and other patents pending.
User Guide template version 8A (November 2008)
4A. Important Safety Information
119
Manufacturer’s Warranty
4B. Manufacturer’s Warranty
⽧ Manufacturer’s Warranty (page 120)
Your phone has been designed to provide you with
reliable, worry-free service. If for any reason you have a
problem with your equipment, please refer to the
manufacturer’s warranty in this section.
For information regarding the terms and conditions of
service for your phone, please contact your wireless
service provider.
Manufacturer’s Warranty
Kyocera Communications, Inc. (“KCI”) offers you, the original
purchaser who has purchased the enclosed subscriber unit (“Product”) only
from an authorized dealer in the United States, a limited warranty that the
Product, including accessories in the Product’s package, will be free from
defects in material or workmanship as follows:
A. ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year
from the date of original purchase, KCI will, at its option, either repair or
replace a defective Product (with new or rebuilt parts/replacements).
B. LIMITED WARRANTY ON REPAIRED/REPLACED
PRODUCTS: For a period equal to the remainder of the limited warranty
period on the original Product or, on warranty repairs which have been
effected on Products for 90 days after the date of its repair or replacement,
whichever is longer, KCI will repair or replace (with new or rebuilt
parts/replacements) defective parts or Products used in the repair or
replacement of the original Product under the Limited Warranty on it.
Proof that the Product is within the warranty period in the form of a bill of sale
or warranty repair document that includes the date of purchase, Product
serial number and the authorized dealer’s name and address, must be
presented to obtain warranty service.This limited warranty is not
transferable to any third party, including but not limited to any subsequent
purchaser or owner of the Product.Transfer or resale of a Product will
automatically terminate warranty coverage with respect to it.
120
4B. Warranty
This limited warranty does not cover and is void with respect to the following:
(i) Products which have been improperly installed, repaired, maintained or
modified (including the antenna); (ii) Products which have been subjected to
misuse (including Products used in conjunction with hardware electrically or
mechanically incompatible or Products used with software, accessories,
goods or ancillary or peripheral equipment not supplied or expressly
authorized by KCI for use), abuse, accident, physical damage, abnormal use
or operation, improper handling or storage, neglect, exposure to fire, water
or excessive moisture or dampness or extreme changes in climate or
temperature; (iii) Products operated outside published maximum ratings; (iv)
cosmetic damage; (v) Products on which warranty stickers or Product serial
numbers have been removed, altered, or rendered illegible; (vi) customer
instruction; (vii) cost of installation, set up, removal or reinstallation; (viii)
signal reception problems (unless caused by defect in material or
workmanship); (ix) damage the result of fire, flood, acts of God or other acts
which are not the fault of KCI and which the Product is not specified to
tolerate, including damage caused by mishandling and blown fuses; (x)
consumables (such as memory cards, fuses, etc.); or (xi) any Products which
have been opened, repaired, modified or altered by anyone other than KCI or
a KCI authorized service center.
This warranty is valid only in the United States.
REPAIR OR REPLACEMENT, AS HERE IN ABOVE PROVIDED, IS
YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE
LIMITED WARRANTY. KCI SHALL HAVE NO LIABILITY FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES,
INCLUDING, BUT NOT LIMITED TO LOSS OF PROFITS, LOST
SALES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT, OR
ANTICIPATED PROFITS ARISING OUT OF USE OR INABILITY
TO USE ANY PRODUCT (FOR EXAMPLE, WASTED AIRTIME
CHARGES DUE TO THE MALFUNCTION OF A PRODUCT). THIS
WARRANTY DOES NOT COVER PRODUCTS SOLD “AS IS” OR
“WITH ALL FAULTS”. KCI MAKES NO OTHER EXPRESS
WARRANTY WITH RESPECT TO THE PRODUCTS. THE
DURATION OF IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF
THIS EXPRESS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may have other
rights which vary from State to State.
To obtain warranty service, contact
Kyocera Communications, Inc.
Attention : Customer Services for Wireless Products
Phone : 866-SANYOWC (866-726-9692)
Web : http://www.sanyowireless.com
4B. Warranty
121
Warranty
Warranty
This limited warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks.Also this limited warranty does
not cover any battery if (i) the battery has been charged by a battery charger
not specified or approved by KCI for charging the battery, (ii) any of the seals
on the battery are broken or show evidence of tampering, or (iii) the battery
has been used in equipment other than the SANYO brand mobile phone for
which it is specified.
This product contains NetFront Browser of ACCESS CO., LTD.ACCESS and NetFront are
trademarks or registered trademarks of ACCESS CO., LTD. in Japan and other countries.This
software is based in part on the work of the Independent JPEG Group.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Kyocera Corporation is under license. Other trademarks and trade names are those
of their respective owners.
XT9¨ is a trademark or registered trademark of Nuance Communications, Inc. and its affiliates
in the United States and other countries.
Kyocera Communications, Inc. is a wholly-owned subsidiary of Kyocera International Inc.
122
4B. Warranty
A
Abbreviated Dialing 22
Activating Your Phone 3
Airplane Mode 38
Alarm Clock 63
Alert Notification 32
Answering Calls 17
Automatic Speech Recognition (ASR)
66
Activating 66
Making a Call 66
Opening Menus 67
Settings 67
B
Backlight 33
Battery 11–13
Capacity 11
Charging 13
Disposal 116
Installing 12
Bluetooth 82–88
Block List 84
Find Me 83
Menu 83
Pairing 86
Printing Data 87
Profiles 85
Sending Data 87
Settings 84
Status Indicators 83
Trusted List 86
Turning On and Off 82
Browser Menu 108
C
Calculator 64
Calendar 59–63
Adding an Event 59
Alerts 61
Call Reminder 60
Deleting Events 62
Printing Events 62
To Do List Items 61
Viewing Events 61
Call Forwarding 98
Call Guard 100
Call History
Making a Call From 49
Saving a Phone Number From 49
Call Memos 69
Call Waiting 97
Caller ID 96
Camera 71
In Phone Folder 75
Mode Options 72
Multiple Shots 73
Self-Timer 73
Sending Pictures 77
Settings 74
Taking Pictures 71
Zoom 74
Index
Index
Index
123
Contacts 51
Adding 52
Assigning Pictures 57
Dialing From 21
Editing 55
Finding Entries 54
Printing 57
Ringer Type 56
Secret Entries 57
Speed Dial 55
Contrast 34
Countdown Timer 64
D
Data Roam Guard 100
Data Services 102–110
Browser Menu 108
Disabling 46
Downloading Content 106
Launching 103
Locking 46
Navigating the Web 104
124
Index
Net Guard 103
User Name 102
Deleting Content 45
Dialing Options 16
Directory Assistance 4
Display Screen 8, 34
Font Size 34
Language 36
Downloading Content 106
E
Email 105
Emergency Numbers 18
End-of-Call Options 19
Enhanced 911 (E911) 18
Entering Text 23–27
Capitalization 24
Predictive Text 24
Selecting Mode 24
G
Groups
Adding Members 53
Creating 52
Editing 53
H
Headset Options 42
Hearing Aid Compatibility 40
History 47
Deleting 50
Details 48
Making a Call From 49
Menu Options 49
Saving a Number From 49
Thread 48
Viewing 47
Viewing From Contacts 54
I
In-Call Options 19
Instant Messaging 106
L
Language 36
Location Settings 36
Lock Code 43
Locking Your Phone 43
M
Making Calls 16
Menu i
Navigation 13
Menu Style 34
Messaging
Alert Options 33
Email 105
Instant Messaging 106
Notification Settings 37
Setting Alerts 33
Text Messaging 93
N
Navigating Menus 13
Navigation Key Shortcuts 41
Net Guard 103
O
Operator Services 4
P
Phone
Setting Up 2
Phone (Illus.) 6
Phone Number
Displaying 14
Finding 20
Saving 20
With Pauses 20
Phone Settings
Airplane Mode 38
Auto-Answer Mode 41
Call Answer Mode 41
Display Settings 33–36
Messaging Settings 37–38
Sound Settings 29–33
TTY Use 39–40
Picture Messaging
Registering Your Account 77
Sending 78–79
Viewing Messages 79
Website 80
Pictures - See also Camera
Assigning 72
Assigning to Contacts 57
In Phone Folder 75
Managing 80
Picture Messaging Website 80
Sending 77
Storing 75
Uploading 80
Plus (+) Code Dialing 21
Power Save Mode 36
Index
Index
K
Key Functions 7
Key Guard 14
Key Tones 31
125
Predictive Text 24
Preset Messages 38
Q
QWERTY Keyboard 23
R
Radio Frequency (RF) Energy 117
Resetting Your Phone 45
Restrict and Lock 43
Restricting Calls 44
Ringer Types 29
Selecting for Contacts 56
Roaming 98–101
Call Guard 100
Checking Voicemail 99
Data Roam Guard 100
Setting Roam Mode 99
126
Index
S
Safety 112–119
Saving a Phone Number 20
Screen Saver 34
Security Settings 42
Silence All 33
Simple Data Exchange 27
Sleep Mode 36
SMS Text Messaging - See Text
Messaging
Special Numbers 44
Speed Dialing 22
Assigning Numbers 55
Stopwatch 65
T
Taking Pictures 71–75
Text Entry - See Entering Text
Text Messaging 93–96
Preset Messages 38
Settings 37
Threaded Messaging 94
Viewing 94
Threaded Messaging 94
Options 95
TTY Use 39–40
Turning Your Phone On and Off 11
U
Unlocking Your Phone 43
V
Vibrate 31
Voice Dialing - See Automatic
Speech Recognition (ASR)
Voice Guide 31
Voice Memos 69
Voicemail 90–92
Alerts 91
Clearing the Icon 92
Notification 90
Passcode 3
Retrieving 91
Setting Up 3, 90
Volume 32
Index
W
Warranty 120
Web - See Data Services
World Clock 64
Index
127
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement