User manual | Dynasty - Miller Welding

Issued March 2017 • Index No. AD/5.5
Dynasty 400 and 800
®
Quick
Specs
Industrial Applications
Processes
Precision fabrication
Heavy fabrication
Pipe and tube fabrication
Aerospace
Aluminum ship repair
Anodized aluminum fabrication
TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
Air carbon arc (CAC-A)
400: 1/4 in. maximum
800: 3/8 in. maximum
TIG/Stick Welding
Power Source
Input Power 208–575 V, 3- or 1-phase power
Amperage Range 400: 3–400 A
800: 5–800 A
Rated Output
400: 300 A at 32 V, 60% duty cycle
800: 600 A at 44 V, 60% duty cycle
Net Weight
400: 134 lb. (61 kg)
800: 198 lb. (90 kg)
AC TIG Features
Independent amplitude/amperage
control allows EP and EN
amperages to be set independently
to precisely control heat input to
the work and electrode.
Balance control provides adjustable
oxide removal which is essential
for creating the highest quality
aluminum welds. These models
provide extended ranges.
Frequency controls the width of
the arc cone and can improve
directional control of the arc.
Allows for any input voltage hookup
(208–575 V) with no manual
linking, providing convenience
in any job setting. Ideal solution
for dirty or unreliable power.
Meter calibration allows
digital meters to be
calibrated for certification.
Cooler Power Supply (CPS)
is an integrated 120-volt
dedicated-use receptacle
for the Coolmate™ 3.5.
AC Waveforms
Wind Tunnel Technology™
protects internal electrical
components from airborne
contaminants, extending the
product life.
Fan-On-Demand™ power source
cooling system operates only when
needed, reducing noise, energy use
and the amount of contaminants
pulled though the machine.
Dynasty 400
machine only
Lift-Arc™ provides AC or DC arc initiation
without the use of high frequency.
Blue Lightning™ high-frequency (HF)
arc starter for non-contact arc initiation.
Provides more consistent arc starts
and greater reliability compared to
traditional HF arc starters.
Program memory features nine
independent program memories
that maintain/save your parameters.
Dynasty 400 Wireless Complete
AC/DC Stick Features
DIG control allows the arc characteristics to be changed for
specific applications and electrodes. Lower the DIG setting
for smooth running electrodes like E7018 and increase the
DIG setting for stiffer, more penetrating electrodes like E6010.
Hot Start™ adaptive control provides positive arc starts
without sticking.
AC frequency control adds additional stability when stick
welding in AC for smoother welds.
Auto-postflow adjusts the length of
postflow time based on the amperage
setting, shielding your tungsten
and eliminating the need to set the
postflow time.
Advanced squarewave,
fast freezing puddle, deep
penetration and fast travel speeds.
Soft squarewave for a soft
buttery arc with maximum
puddle control and good wetting action.
Sine wave for customers
that like a traditional arc.
Quiet with good wetting.
Triangular wave reduces
the heat input and is good on
thin aluminum. Fast travel speeds.
DC TIG Features
Exceptionally smooth and precise
arc for welding exotic materials.
Pulse. Pulsing can increase puddle
agitation, arc stability and travel
speeds while reducing heat input
and distortion. These models
provide extended ranges.
Power source is warranted for three years, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada MillerWelds.com
An ITW Welding Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Specifications (Subject to change without notice.)
Model
Dynasty
400
Input
Power
Welding
Amperage
Range
3-phase
3–400 A
1-phase
Dynasty
800
3-phase
1-phase
3–400 A
5–800 A
5–800 A
Rated
Output
Amps Input at Rated Load Output, 50/60 Hz
208 V 230 V 400 V 460 V 575 V KVA KW
250 A at 30 V,
100% duty cycle
28
26
14
13
10
10.3
9.8
300 A at 32 V,
60% duty cycle
36
33
19
16
13
13.1
12.5
200 A at 27.2 V,
100% duty cycle
39
35
19
17
13
8.2
7.5
250 A at 29 V,
60% duty cycle
52
47
26
22
17
10.9
9.9
500 A at 40 V,
100% duty cycle
73
66
37
32
25
26
25
600 A at 44 V,
60% duty cycle
96
86
48
42
33
35
33
400 A at 34 V,
100% duty cycle
98
88
48
41
32
20
19
500 A at 40 V,
60% duty cycle
136
122
66
56
44
28
26
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Max.
Open-Circuit
Voltage
Dimensions
75 VDC
H: 24.75 in. (629 mm)
(10 –15 VDC*) W: 13.75 in. (349 mm)
D: 22 in. (559 mm)
with TIGRunner®
H: 43.125 in. (1,095 mm)
W: 23.125 in. (587 mm)
D: 43.75 in. (1,111 mm)
H: 34.5 in. (876 mm)
75 VDC
(10 –15 VDC*) W: 13.75 in. (349 mm)
D: 22 in. (559 mm)
with TIGRunner®
H: 53.125 in. (1,400 mm)
W: 23.125 in. (587 mm)
D: 43.75 in. (1,111 mm)
Net
Weight
134 lb.
(61 kg)
with
TIGRunner®
251 lb.
(114 kg)
198 lb.
(90 kg)
with
TIGRunner®
313 lb.
(142 kg)
All CE models conform to the applicable parts of the IEC 60974 series of standards.
*Indicates sense-voltage for Lift-Arc TIG and Low OCV stick.
™
Performance Data
Model
Dynasty
400
Dynasty
800
2
Input
Power
TIG (GTAW)
Duty Cycle
Stick (SMAW)
Duty Cycle
AC TIG Material
Thickness Range
DC TIG Material
Thickness Range
Stick Electrode
Maximum Diameter
Carbon Arc Gouging
(CAC-A) Maximum
Generator
Requirement
3-phase
400 A, 20%
300 A, 60%
250 A, 100%
400 A, 20%
300 A, 60%
250 A, 100%
.015 – 5/8 in.
(0.38 –15.9 mm)
.012 – 5/8 in.
(0.3 –15.9 mm)
6010: 1/4 in. (6.4 mm)
7018: 1/4 in. (6.4 mm)
7024: 1/4 in. (6.4 mm)
1/4 in. (6.4 mm)
20 kVA
1-phase
300 A, 20%
250 A, 60%
200 A, 100%
300 A, 20%
250 A, 60%
200 A, 100%
3-phase
800 A, 20%
600 A, 60%
500 A, 100%
800 A, 20%
600 A, 60%
500 A, 100%
.020 –1 in.
(0.5 – 25.4 mm)
.020 –1 in.
(0.5 – 25.4 mm)
6010: 1/4 in. (6.4 mm)
7018: 1/4 in. (6.4 mm)
7024: 1/4 in. (6.4 mm)
3/8 in. (9.5 mm)
50 kVA
1-phase
500 A, 60%
400 A, 100%
500 A, 60%
400 A, 100%
Dynasty 400 and 800 Control Panel
®
9
10
4
3
11
2
1
12
f
5
6
7
8
15
14
13
Control Panel Parameter Values
1. Memory Switch
*Pro-Set parameter selectable.
9. Memory Card Port
10. Activity Indicator
11. Encoder Control
12. Amperage Button
13. AC Waveshape
EN Amperage
3–400 A/5– 800 A
EP Amperage
3–400 A/5– 800 A
Balance*
50–99% EN
Frequency*
20–400 Hz
14. Gas/DIG
Preflow
0.0–25.0 seconds
Postflow
Auto/Off–50 seconds
DIG*
Off–100%
15. Sequencer Control
Initial Amps
3–400 A/5– 800 A
Initial Time
Off–25.0 seconds
Initial Slope
Off–50.0 seconds
Weld Time
Off–999 seconds
Final Slope
Off–50.0 seconds
Final Amps
3–400 A/5– 800 A
Final Time
Off–25.0 seconds
User Menu (Press Gas and Amperage buttons.)
Tech Menu (Hold Gas and Amperage buttons five seconds.)
2. Memory Display
3. Voltmeter Display
4. Ammeter Display
5. Polarity
6. Process/
Arc Starting
7. Output Control
36 Combinations
(9 AC TIG)
(9 AC stick)
(9 DC TIG)
(9 DC stick)
AC/DC
TIG: HF impulse, Lift-Arc
STICK : Adaptive Hot Start
Standard remote,
2T trigger hold,
Output on
8. Pulser Control
Pulses per Second* DC : 0.1– 5,000 PPS
AC : 0.1– 500 PPS
Peak Time*
5 – 95%
Background Amps* 5 – 95%
1. Tungsten Size 400 = .020 – 3/16 in./ GEN or 0.5 – 4.8 mm
800 = .040 –1/4 in. /GEN or 1.0 – 6.4 mm
2. Remote Trigger = 3T / 4T / 4TL / 4TE / 4Tm
3. Independent Amplitude = SAME / INDP
4. Wave Form = SOFT / ADVS / SINE / TRI
5. Commutation Amperage = HIGH / LOW
6. Stick Hot Start = ON / OFF
1. Arc Time
0.0–9,999 hours
0.0–59 minutes
0–999,999 cycles
Resettable
2. Error Log = Error event recorder
3. Stick Stuc = OFF/ON
4. OCV = LOW/NORM
5. Weld Timers = OFF/ON
6. Cooler Power = AUTO/ON/OFF
7. Locks = OFF/1–4
8. Meter Display
9. External Pulse Control = OFF/ON
10. Machine Reset
11. Software Number
12. Serial Number
Address = 1–247
13. Slave (with Modbus®
automation expansion) Baudrate = 9600/19.2K
Parity = EVEN/ODD/NONE
3
AC Waveshape Controls
Feature
Setting
AC Balance Control
Reduces balling
action and helps
maintain point
Minimum visible
oxide removal (etching)
50% EN
Increases balling
action of the
electrode
Visible oxide
removal (etching)
% EN
Wider profile
ideal for buildup work
60 Hz
Current
Bead
% EP
0
% EN
Note: Decreasing the AC Frequency
softens the arc and broadens the weld
puddle for a wider weld.
Visible oxide
removal (etching)
Time
Current
120 Hz
%
EP
0
% EN
%
EP
Narrower profile
for fillet welds
and automated
applications
100A EP
200A EN
Current
Independent AC Amperage
Control
0
EP+
More current
in EN than EP:
Faster travel speeds
and deeper
penetration
EN –
Time
Current
200A EP
100A EN
EP+
0
EN –
Time
Bead
Visible oxide
removal (etching)
% EN
Time
4
Bead
% EP
0
AC Frequency Control
Allows the EN and EP amperage
values to be set independently. Adjusts
the ratio of EN to EP amperage to
precisely control heat input to the
work and the electrode. EN amperage
controls the amount of heat directed
to the work, while EP amperage
dramatically affects the arc cleaning
action (along with the AC Balance
control). Increased EN amperage also
provides deeper penetration and
allows for increased travel speeds.
Bead
% EP
% EN
Time
Controls the width of the arc cone.
Increasing the AC Frequency
provides a more focused arc and
increased directional control.
Weld Effect
0
Time
Current
Note: Set the AC Balance control for
adequate arc cleaning (etching) action at
the sides and in front of the weld puddle.
AC Balance should be fine-tuned
according to the amount of etching
desired.
75% EN
Current
Controls arc cleaning action.
Adjusting the % EN of the AC wave
controls the width of the etching zone
surrounding the weld.
Arc Effect
More current
in EP than EN:
Shallow penetration,
increased balling
and etching
Bead
Minimum visible
oxide removal (etching)
Bead
Visible oxide
removal (etching)
AC Waveshape Controls (Continued)
AC Waveform Selection
Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from:
Advanced Squarewave
Soft Squarewave
All the benefits of
advanced square,
fine tuned to provide
a smooth, soft arc
with maximum
puddle control and
good wetting action.
(+)
Fast transitions for
responsive and
dynamic arc.
0
(–)
Amps
Amps
(+)
0
(–)
Time (1 AC Cycle)
Time (1 AC Cycle)
Sinewave
0
(–)
(+)
Amps
Square transitions
eliminate the need for
continuous HF, while
the sinewave peaks
soften the arc.
(+)
Amps
Triangular Wave
0
(–)
Time (1 AC Cycle)
Time (1 AC Cycle)
Unconventional wave
provides the punch of
the peak amperage,
while reducing overall
heat input. Quick puddle
formation reduces weld
time — limiting heat
input and reducing weld
distortion, especially
on thin materials.
Pulsed TIG Controls
High-Speed Pulsed TIG Controls
• PPS Pulses per second (Hz): DC = 0.1 – 5,000 PPS / AC = 0.1 – 500 PPS
• % ON – % Peak Time: 5 – 95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
• Background Amps: 5 – 99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
Conventional Pulsed TIG
Peak
Amps
Peak Time %
Background
Amps
(% of Peak)
High-Speed Pulsed TIG
Peak
Amps
Peak Time %
Background
Amps
(% of Peak)
Pulse Cycle
Typically from 1 to 10 PPS. Provides a heating and cooling effect
on the weld puddle and can reduce distortion by lowering the
average amperage. This heating and cooling effect also produces a
distinct ripple pattern in the weld bead. The relationship between
pulse frequency and travel speed determines the distance between
the ripples. Slow pulsing can also be coordinated with filler metal
addition and can increase overall control of the weld puddle.
Pulse Cycle
In excess of 40 PPS, Pulsed TIG becomes more audible than visible —
causing increased puddle agitation for a better as-welded microstructure.
Pulsing the weld current at high speeds — between a high Peak and a
low Background amperage — can also constrict and focus the arc.
This results in maximum arc stability, increased penetration and
increased travel speeds (Common Range: 100 – 500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new
dimensions. The ability to pulse at 5,000 PPS further enhances arc
stability and concentration potential — which is extremely beneficial to
automation where maximum travel speeds are required.
5
Dynasty 400 and 800 Models/Packages
®
Machines and Preconfigured
Water-Cooled Packages
Order machine only or use a single stock number to
order a complete preconfigured system.
907717001 and
907719001
packages shown.
907717 and 907719
models shown.
Machine Only
951695 package
shown.
TIGRunner® Package (Machine/Cart/Cooler)
Complete Package (Machine/Cart/Cooler/Torch Kit/Remote)
Dynasty 400 (CSA)
Dynasty 400 (CE)
907717
907717002
Dynasty 400 (CSA)
907717001
Dynasty 400 (CSA) w/Foot Control, W-375
951694
Dynasty 400 (CSA) w/Wireless Foot Control, W-375 951695
Dynasty 800 (CSA)
Dynasty 800 (CE)
907719
907719002
Dynasty 800 (CSA)
907719001
Dynasty 800 (CSA) w/Foot Control
Dynasty 800 (CSA) w/Wireless Foot Control
Comes with:
• 8 ft. power cord (no plug) (400 model)
• Quick reference guide
• Runner™ cart 300244
• Coolmate™ 3.5 300245
• Two thread-lock connectors (800 model)
• One thread-lock water-cooled connector
(800 model)
Comes with:
• 8 ft. power cord (no plug) (400 model)
• Quick reference guide
• Two 50-mm Dinse-style connectors (400 model)
• Two thread-lock connectors (800 model)
• One thread-lock water-cooled connector
(800 model)
Build a
Water-Cooled
Package
907717001
Dynasty 400
TIGRunner® shown
with four bottles
of 043810
low-conductivity
coolant.
Select desired
stock number
for each step.
Step #1 • Select Dynasty TIGRunner® and Coolant
Dynasty 400 TIGRunner
Dynasty 800 TIGRunner
907717001
907719001
&
Low-Conductivity Coolant
(must be ordered in quantities of four)
043810
Comes with:
• 8 ft. power cord (no plug) (400 model)
• Quick reference guide
• Runner™ cart 300244
• Coolmate™ 3.5 300245 and 4 gallons of coolant 043810
• W-375 torch kit 301268 (400 model) or
W-400 (WP-18SC) torch kit 300186 (800 model)
• Remote control 194744 (foot) or
Remote control 300429 (wireless foot)
194744 remote shown.
301268 kit shown.
Step #2 • Select Remote Control
Wireless Foot
RFCS-14 HD Foot
RCC-14 E/W Fingertip
RCCS-14 N/S Fingertip
RMS-14 Pushbutton
RMLS-14 Momentary/Maintained
RHC-14 Hand
Wireless Hand
951696
951697
Step #3 • Select Torch Kit
300429
194744
151086
043688
187208
129337
242211020
300430
W-250 Kit
300185
W-280 Kit
300990
W-375 Kit
301268
(recommended for 400 model)
W-400 (WP-18SC) Kit
300186
(recommended for 800 model)
Genuine Miller Accessories
®
Water-Cooled Torch Kits
W-280 Torch Kit 300990
Weldcraft™ W-280 25-foot (7.6 m) TIG torch
with Dinse-style connector
Torch cable cover
Work clamp with 15-foot (4.6 m) 1/0 cable
and Dinse-style connector
Flowmeter regulator
Gas hose (regulator to machine)
AK4C torch accessory kit includes nozzles,
collets, collet bodies and 2% ceriated tungsten
electrodes (1/16, 3/32 and 1/8 inch)
6
W-375 Torch Kit 301268
Recommended for Dynasty 400
Weldcraft™ W-375 25-foot (7.6 m) TIG torch
with Dinse-style connector
Torch cable cover
Work clamp with 15-foot (4.6 m) 1/0 cable
and Dinse-style connector
Flowmeter regulator
Gas hose (regulator to machine)
AK4C torch accessory kit includes nozzles,
collets, collet bodies and 2% ceriated tungsten
electrodes (1/16, 3/32 and 1/8 inch)
W-400 (WP-18SC) Torch Kit 300186
Recommended for Dynasty 800
Weldcraft™ W-400 (WP-18SC) 25-foot (7.6 m)
TIG torch with thread-lock connector
Torch cable cover
Work clamp with 12-foot (3.7 m) 4/0 cable
with thread-lock connector
Flowmeter regulator
Gas hose (regulator to machine)
AK18C torch accessory kit includes nozzles,
collets, collet bodies and 2% ceriated tungsten
electrodes (3/32, 1/8 and 5/32 inch)
Genuine Miller Accessories (Continued)
®
Water-Cooled TIG Torch
Connector 195377
For Dynasty ® and
Maxstar ® 400. 50 mm
Dinse-style with water return line. For use with
all Weldcraft™ water-cooled torches.
Water-Cooled TIG Torch
Connector 225028
For Dynasty and Maxstar
800. 50 mm thread-lock
with water return line. For
use with all Weldcraft™
water-cooled torches.
Runner™ Cart 300244
Designed to accommodate
Dynasty or Maxstar 400
or 800 power sources and
a Coolmate™ 3.5 cooler.
Cart features single
cylinder rack, foot pedal
holder, three cable/torch
holders, and two TIG
electrode filler holders.
Coolmate™ 3.5
300245
Designed to integrate
with the Dynasty and
Maxstar 400 and 800
power sources. For use with water-cooled torches
rated up to 600 amps. 3.5-gallon capacity.
Low-Conductivity TIG Coolant 043810
Sold in multiples of four in one-gallon recyclable
plastic bottles. Miller coolants contains a base of
ethylene glycol and deionized water to protect
against freezing to -37° Fahrenheit (-38°C) or
boiling to 227° Fahrenheit (108°C).
Automation Interface Connection Kit
278161 Field
Provides control of power source welding
parameters through a 28-pin receptacle.
The 28-pin receptacle replaces the standard
14-pin receptacle and requires a PLC controller
to operate the power source. Ideal for
automated equipment integration.
Weld Current Sensor 300179 Field
Detects when work clamp is not connected and
prevents expensive damage to disconnect
devices and input power cord and wiring.
Remote Controls and Switches
Wireless Remote Foot
Control 300429
For remote current and
contactor control. Receiver
plugs directly into the
14-pin receptacle of Miller
machine. 90-foot (27.4 m) operating range.
Wireless Remote Hand
Control 300430
For remote current and
contactor control. Receiver
plugs directly into the
14-pin receptacle of Miller
machine. 300-foot (91.4 m) operating range.
RCCS-14 Remote
Contactor and Current
Control 043688
North/south rotary-motion fingertip control
attaches to TIG torch using two hook-and-loop
fasteners. Includes 26.5-foot (8 m) cord and
14-pin plug.
RCC-14 Remote
Contactor and Current
Control 151086
East/west rotary-motion fingertip control
attaches to TIG torch using two hook-and-loop
fasteners. Includes 26.5-foot (8 m) cord and
14-pin plug.
RFCS-14 HD Foot
Control 194744
Maximum flexibility is
accomplished with a
reconfigurable cord
that can exit the front,
back or either side of
the pedal. Foot pedal provides remote current
and contactor control. Includes 20-foot (6 m)
cord and 14-pin plug.
RHC-14 Hand Control
242211020
Miniature hand control for
remote current and contactor
control. Dimensions: 4 x 4 x
3.25 inches (102 x 102 x 83 mm).
Includes 20-foot (6 m) cord and 14-pin plug.
RMLS-14 Switch
129337
Momentary- and
maintained-contact rocker switch for contactor
control. Push forward for maintained contact
and backward for momentary contact. Includes
26.5-foot (8 m) cord and 14-pin plug.
RMS-14 On/Off Control
187208
Momentary-contact switch for contactor control.
Rubber-covered pushbutton dome switch ideal
for repetitive on-off applications. Includes
26.5-foot (8 m) cord and 14-pin plug.
Extension Cables for 14-Pin Remote Controls
242208025 25 ft. (7.6 m)
242208050 50 ft. (15.2 m)
242208080 80 ft. (24.4 m)
TIG Welding Gloves
Performance TIG Gloves
263345 X-Small
263346 Small
263347 Medium
263348 Large
263349 X-Large
Completely unlined, goat grain
leather with triple-padded palm.
Memory Cards
Memory Card Expansion
301151 14-pin automation expansion
Provides the ability to access common automation
functions through the 14-pin connection.
301152 14-pin Modbus® expansion
Provides the ability to access basic and advanced
functions through the 14-pin connection.
Memory Card (Blank) 301080
A blank, commercially available memory card
used for transferring software updates and
expandable features from your computer
to the machine.
Free software updates and feature expansions can
be downloaded at MillerWelds.com/tigsoftware.
Educational Materials
To order, please call Miller Literature at 866-931-9732
or visit MillerWelds.com/resources/tools.
Gas Tungsten Arc Welding (TIG) Publication
250833
Tungsten
Tungsten
Amp Range
2% Ceriated (AC/DC)
2% Lanthanated (AC/DC)
1/16 in. (1.6 mm)
70 –150 A
WC116X7
WL2116X7
3/32 in. (2.4 mm)
140 – 250 A
WC332X7
WL2332X7
1/8 in. (3.2 mm)
225 – 400 A
WC018X7
WL2018X7
5/32 in. (4.0 mm)
300 – 500 A
WC532X7
WL2532X7
7
Ordering Information
Equipment and Options
Stock No.
Description
Dynasty® 400
907717
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 400 International
907717002
Auto-Line™ 380 – 575 V, 50/60 Hz, CE. 8 ft. power cord
Dynasty® 400 TIGRunner ®
907717001
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord. Requires coolant
Dynasty® 400 Wireless Complete W-375
951695
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty 400 Complete W-375
951694
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 800
907719
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA
Dynasty® 800 International
907719002
Auto-Line™ 380 – 575 V, 50/60 Hz, CE
Dynasty 800 TIGRunner
907719001
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA. Requires coolant
Dynasty 800 Complete
with Wireless Remote Foot Control
951697
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA
Dynasty® 800 Complete with Foot Control
951696
Auto-Line™ 208 – 575 V, 50/60 Hz, CSA
Water-Cooled Torch Kits
300185
300990
301268
300186
W-250 (WP-20)
W-280 (WP-280)
W-375 (recommended for Dynasty 400)
W-400 (WP-18SC) (recommended for Dynasty 800)
Water-Cooled TIG Torch Connectors
195377
225028
Connects Weldcraft ™ water-cooled torches to Dinse-style connector
Connects Weldcraft ™ water-cooled torches to Dynasty 800
(thread-lock connector included with 800 models)
Weldcraft ™ A-200 (WP-26) TIG Torch
WP-26-25-R
For Dynasty 400 only. 25 ft. (7.6 m) cable. Requires 195379 connector
®
®
®
®
Qty.
TIG Torches, Kits and Connectors
Tungsten
See page 7
Remote Controls
Wireless Remote Foot Control
300429
Foot control with wireless 90 ft. (27.4 m) operating range
Wireless Remote Hand Control
300430
Hand control with wireless 300 ft. (91.4 m) operating rang
RCCS-14
043688
North/south fingertip control
RCC-14
151086
East/west fingertip control
RFCS-14 HD
194744
Heavy-duty foot control
RHC-14
242211020
Hand control
RMLS-14
129337
Momentary/maintained rocker switch
RMS-14
187208
Momentary rubber dome switch
Extension Cables
See page 7
Accessories
Runner™ Cart
300244
See page 7
Coolmate™ 3.5
300245
120 V, 50/60 Hz, CE. Requires coolant
TIG Coolant
(Must be ordered in quantities of four)
043810
1-gallon plastic bottle. Protects against freezing to -37° Fahrenheit (-38°C)
or boiling to 227° Fahrenheit (108°C)
Automation Interface Kit
278161
Field installation required. Provides 28-pin automation connections
Weld Current Sensor
300179
Field installation required. Detects when work clamp is not connected
Dinse-Style Connector 50 mm (1 male)
042418
Used to connect weld cable to Dinse terminal machine
Thread-Lock Connectors (2 male)
225029
Used to connect weld cable to Dynasty 800 or Maxstar 800
Dinse-Style Connector 50 mm
(1 male, 1 female)
042419
Used to extend weld cables
Dinse/Tweco® Adapter
042465
Male Dinse to female Tweco
Dinse/Cam-Lok Adapter
042466
Male Dinse to female Cam-Lok
TIG Welding Gloves
See page 7
Memory Cards
Gas Tungsten Arc Welding (TIG) Publication
Date:
Distributed by:
© 2017 Miller Electric Mfg. Co.
See page 7
250833
Total Quoted Price:
Price

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project