Professional Equipment Line

Professional Equipment Line
®
Professional Equipment Line
Professional Equipment Line
Professional products for a cleaner environment
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
Address
777 South Street, P.O. Box 2310
Newburgh, New York 12550-0606
Call
800.835.7812 • 845.565.8850
Fax
800.752.6883 • 845.565.9392
Internet
www.mastercraftusa.com
E-Mail
[email protected]
Mastercraft® is a registered trademark of Mastercraft Industries, Inc.
All rights reserved.
Specifications are subject to change without notice.
Mastercraft Industries, Inc. © 2007. All rights reserved.
Table of Contents
®
Professional products for a cleaner environment
Product
Page
Carpet Care
Extractors - Box with Accessories
Extractor -Self Contained
Floor / Carpet Dryer
Uprights: Single and Dual Motor
Wide Area: 24” and 28”
25
24
26
27
26
Floor Machines / Burnishers
Burnishers 1000; 1500; 2,000 RPM
Floor Machines 175 RPM / 250 RPM
Floor Machines Brushes / Pad Drivers
Floor Machines Dual / Variable Speed
Scrubber/Edger
6/7
8/9
11
10
10
Power Washers
Electric and Gas
23
Automatic Scrubbers:
15” Electric Scrubber
20” and 17” Battery Scrubber
21” Battery Scrubber
4
5
4
Vacuums:
Backpack - Probe™
Economy Steel Wet/Dry
Contractors Poly Wet/Dry and Squeegee
Drum Adaptor Vacuums
Hand Blower
HEPA EnviroMaster™7
HEPA EnviroMaster™ CT-9
HEPA EnviroMaster™ CT-6
HEPA Stainless Steel Backpack
IT™ Single and Dual Motor Wet/Dry
Poly Wet/Dry
Power Nozzles
QuietMaster® Dry Poly
Specifications - Motor Heads and Vacuum Tanks
Squeegee Attachments - 30”
Steel Dry and Wet/Dry
Tool Kits (Optional)
18
15
14
15
15
18
19
20
18
16
13
21
17
22
21
12
15
Page 3
Battery and Electric Scrubbers
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
Navigator® Battery Scrubber
specifications
The MSRC-21B Navigator® is a distinctly different automatic scrubber with
a tri-directional 3-brush system that revolutionizes the way hard surface
floors are cleaned. It is especially effective on hard to clean surfaces such
as grooved, uneven, and other difficult surfaces. Typically cleans up to
12,500 sq. ft per hour.
MSRC-21B (363839)
Cleaning Path: 21"
Rotary Brush: (2) 10"
Cylindrical Brush: (1) 15” Offset
Brush Speed:
Rotary - 225 RPM
Cylindrical - 680 RPM
Brush Pressure: 70 Lbs
Squeegee Width: 30"
Tank Capacity:
12 Gallon Solution & Recovery
Vacuum Motor:
2 Stage, 24 - 20 AMPS
Brush Motors:
Rotary - (2) 10 AMPS
Cylinder - 15 AMPS
Solution Pump: 3.6 AMPS
Turning Path: 44”
Includes:
24 Volt Automatic Battery
Charger, Choice of one set
of Rotary Brushes and
Cylindrical Brush
*Battery Requirements:
Two - 130 AMP Hour
(423157 - Set of Two)
*Not Included
Key Activated Soft Touch Control Panel
Clearly illustrated and warning light indicates when
the batteries need recharging.
Ergonomically Designed Handle
With brush activator bar, just squeeze to start
scrubber moving.
Brush Pressure and Solution Controls
Adjustable for more effective and efficient cleaning,
allowing for metering of solution to meet the various
requirements when scrubbing.
Rear Mounted 30” Squeegee
With air groove blades, vacuums in forward or
reverse covering the entire cleaning path.
Features
Floating 3-Brush System
Two-10” counter-rotating brushes for scrubbing and
one cylindrical brush that reaches down into cracks,
crevices, grout and uneven floors for thorough
cleaning without streaking.
specifications
Optional:
Pad Driver - 2 Required (413348)
See-Thru Dome
Allows for constant monitoring of the scrubbers
cleaning effectiveness.
Surfer® Electric Scrubber
MSR-15E (408484)
Scrub Path: 13.5”
Vacuum Path: 15.5”
Capacity:
3.5 Gallon Solution
4 Gallon Recovery
Vacuum Motor: 850 Watts
Brush Motor: 200 Watts
Brush Speed: 200 RPM
Brush Pressure: 22 Lbs
Power Cord:
25 Feet, 3 Wire Grounded
Storage Dimensions:
15" W X 22" L X 16" H
Includes:
Two - 6.5" Counter Rotating
Scrub Brushes
12 Gallon Shared Solution/Recovery Tank
Rotationally molded of polyethylene and steel tubular
chassis construction is built to withstand years of
professional use.
Easy to use, the Surfer® washes, scrubs and squeegees floors, leaving them
clean and dry. Cleans up to 6,000 square feet per hour.
Controls Conveniently Located
Separate ON/OFF switches that control the brushes
and vacuum. Solution is dispensed with a trigger.
Forward/Reverse Operation
Reducing labor, time and effort while providing more
effective cleaning.
Two Quick Release Brushes
Wash and scrub on most hard floor surfaces.
Features
Shared Solution/Recovery Tank
Durable rotationally molded polyethylene tank is
removable, with shared bladder system and drain
port.
Two Quick Release Squeegees
With vacuum shoes, dries the entire cleaning path
both in forward and reverse.
Telescoping Handle
Molded of durable plastic, adjusts to operator height
and folds for transport or storage.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Pristal Premium Battery Scrubbers
®
Professional products for a cleaner environment
Action Battery Scrubbers
The Pristal™ scrubbers compact design makes them
easy to maneuver around tight corners, and down
narrow aisles.
Hard surface floors are cleaned fast, efficiently
and thoroughly. They are excellent for use in
schools supermarkets, shopping centers,
hospitals, etc.
Controls are clearly marked
and at the operators
fingertips.
Rotationally molded polyethylene
solution and recovery tanks and
metal main frame construction
are built to withstand years of
professional use.
Sleek design reduces the
scrubbers profile that improves
operators sightline and allows
for easy access to batteries
for maintenance and service
by qualified personnel.
Filter protects vacuum
motor from damage.
Large opening for filling
solution tank.
Curved squeegee assembly
directs the solution towards
the center for more effective cleaning. The adjustable manual lift
ensures the floor is left clean and dry. Squeegee blades are easy
to replace.
Solution tank’s large opening makes it easy to fill and recovery tank
is tilted for total drainage.
Operator friendly control panel is clearly illustrated and at the
operators fingertips making the scrubber easy to operate.
Easy access to batteries.
Additional features include protected motor/brush connections,
built-in brush delay, parking brake, forward and back speed setting, easy access to circuit breakers and mechanical brush head
lift.
specifications
Brush Speed: 145 RPM
Brush Pressure: 80 Lbs
Solution Tank: 11.5 Gallons
Recovery Tank:13 Gallons
Vacuum Motor: 2 Stage, 1/2 HP
Brush Motors: 3/4 HP
Drive: Brush Propelled
Batteries Requirements
(2) - 12 Volt 100 AMP Hour Gel
Includes:
(1) Pad Driver
24 Volt On-Board Charger
AS20B (201979)
Cleaning Path: 20"
Rotary Brush: One - 20"
Squeegee Width: 31.5"
Cleaning Rate:
21,000 Sq Ft Per Hr, Maximum
AS17B (487694)
Pad drive and brushes
are easy to remove.
Cleaning Path: 17"
Rotary Brush: One - 17"
Squeegee Width: 26"
Cleaning Rate:
18,000 Sq Ft Per Hr, Maximum
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
MBS High-Speed Burnishers
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
1000 / 1500 / 2000 RPM
Our MBS burnishers are designed for top professional results to achieve the high
gloss “wet look” on hard surface floors. Easier and faster to use, they operate in
a straight line rather than side-to-side. Productivity is increased and fatigue is
reduced.
specifications
Motor:
11/2 HP 120V, Permanent
Magnet; DC Rectified for AC
Transmission Drive: V-Belt
Pad Diameter: 20”
Transport Wheels: 4”
Operating Wheels: 8”
MBS-1000E (371874)
Flexible Dual Triggers
Oversize
Handle Grips
Left or right hand operation
with safety lock-out to
prevent accidental startup.
MBS-1000EF
For operator’s
comfort.
Heavy Duty Switch
50 Ft Power Cord
Set in die cast aluminum
switch box that won’t
chip or rust.
Current: 14 AMPS
Pad Speed: 1000 RPM
Pad Drive: Structural Foam
3-Wire grounded with
safety yellow water
resistant jacket.
MBS-1000EF (313017)
Current: 10.7 AMPS
Pad Speed: 1000 RPM
Pad Drive: Flex Drive Assembly
Steel Clamp Lever
Adjusts handle position.
MBS-1500E (388858)
Current: 15 AMPS
Pad Drive: Structural Foam
Pad Speed: 1500 RPM
MBS-1500EFC
Cast Aluminum Body
Reinforced for added
strength and rigidity.
MBS-1500EF (312991)
Current: 10.5 AMPS
Pad Drive: Flex Drive Assembly
Pad Speed: 1500 RPM
8” Operating Wheels
MBS-1500EFC (419664)
Current: 12.25 AMPS
Pad Drive: Flex Drive Assembly
Pad Speed: 1500 RPM
Reduces pull motion.
MBS-2000EF
Cantilever (1500 RPM Only)
Adjustable center of
gravity.
MBS-2000EF (312916)
Current: 12 AMPS
Pad Drive: Structural Foam
Pad Speed: 2000 RPM
Chrome Plated Apron
Heavy gauge steel with
Front handle for lifting
and transporting.
Non-Marring Bumpers
Prevents damage to walls
and furniture.
1000 RPM Burnisher
1500 RPM Burnisher
The right choice for daily floor maintenance
when spray-buffing and polishing floors, eliminating the need for frequent stripping and
refinishing.
This is our most popular model for burnishing
floors to a smooth, high gloss finish. The
Cantilever pad pressure system allows weight
to be evenly maintained for a consistent luster
across the floor surface. Pad pressure is
adjustable to accommodate the various pad
thicknesses.
2000 RPM Burnisher
For a lasting high gloss “wet-look”, choose the
2000 RPM burnisher. Floor finish is locked in
for a hard wear-resistant shine. This burnisher
is equipped with a pad pressure indicator light,
and an adjustable front caster to control AMP
draw and pad pressure. Built-in circuit breaker
protects against overload.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Pristal Premium Burnisher
®
Professional products for a cleaner environment
1500 RPM Burnisher
Burnish floors to a smooth, high gloss finish with the OC20. It is designed for
top professional results to achieve the high-gloss “wet look and operates in a
straight line rather than side-to-side. This increases productivity and reduces
operator fatigue. The Cantilever pad pressure system allows weight to be
evenly maintained for a consistent luster across the floor surface. The flex
drive assembly automatically adjusts to floor surface and pad pressure is
adjustable to accommodate various pad thicknesses.
Oversize Handle Grips
For operator’s comfort.
Flexible Dual Triggers
Left or right hand operation with safety
lock-out to prevent accidental startup.
specifications
OC20 (487813)
Motor:
11/2 HP 120V, Permanent
Magnet; DC Rectified for AC
Current: 12.5 AMPS
Pad Drive: Flex Drive Assembly
Pad Speed: 1500 RPM
Transmission Drive: V-Belt
Pad Diameter: 20”
Transport Wheels: 4”
Operating Wheels: 8”
Includes: Flex Drive Assembly
Heavy Duty Switch
Set in die cast aluminum switch box
that won’t chip or rust.
Pig Tail w/Twist Lock
and 50 Ft Extension Cord
Quick release detachable
power cord 3 wire grounded
with water resistant jacket.
8” Operating Wheels
Reduces pull motion.
Cast Aluminum Body
Reinforced for added
strength and rigidity.
Chrome Plated Apron
Heavy gauge steel
with front handle
for lifting and
transporting.
Quick Release Handle
with “Infinity” Foot Pedal
Easy to release and adjust to operation position.
Permanently Mounted Pad Holder
Non-Marring
Bumpers
Prevents damage
to walls and
furniture.
With threaded pad centering device.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Deluxe Floor Machines
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
175 RPM / 250 RPM Floor Machines
specifications
Our standard and high speed floor machines are available in a variety of brush sizes
and motor horsepower to meet the various needs of floor care professionals. They
are field-tested to withstand the demanding heavy duty use required for stripping,
scrubbing and polishing hard surface flooring.
MD-10A (10”- 340200)
MD-13A (13”- 355062)
Motor:
1/3 HP, 120V-60 Cycle, 56 Frame
Current: 6.4 AMPS
Gears: 2 Idler
Brush Speed: 175 RPM
Transport Wheels: 3”
Oversize Handle Grips
For operator’s comfort.
MD-15
Flexible Dual Triggers
MD-13B (13”- 358916)
MD-15B (15”- 355011)
Left or right hand operation,
non-conductive with built-in safety
lock-out
to prevent accidental startup.
Motor:
1/2 HP, 120V-60 Cycle, 66 Frame
Current: 8 AMPS
Gears: 2 Idler
Brush Speed: 175 RPM
Transport Wheels:
3” - MD-13B; 5” - MD-15B
Heavy-Duty Switch
Is set in a die cast aluminum
switch
box, which won’t chip or rust.
MD-15D (15”- 355046)
MD-17D (17”- 351954)
MD-20D (20”- 351962)
MD-21D (21”- 360422)
50 Ft Power Cord
MD-20
3-Wire grounded with water
resistant jacket.
Motor:
1 HP, 120V-60 Cycle, 66 Frame
Current: 13.2 AMPS
Gears: 3 Idler
Brush Speed: 175 RPM
Transport Wheels: 5”
MD-20E (20”- 357073)
MD-21E (21”- 364126)
MD-24E (24”- 351938)
Motor:
11/2 HP, 120V-60 Cycle,
66 Frame; Dual Capacitor
Current: 15 AMPS
Gears: 3 Idler
RPM: 175
Transport Wheels:
MD20E & MD21E- 5”; MD24E- 4”
MH-17E (17”- 358010)
MH-20E (20”- 358029)
Motor:
11/2 HP, 120V-60 Cycle,
66 Frame; Dual Capacitor
Current: 15 AMPS
Gears: 3 Idler
Brush Speed: 250 RPM
Transport Wheels: 5"
4 Gallon Solution Tank (Optional)
Dispenses liquid for scrubbing
and polishing. (334898).
All Steel Gear
System*
MD-24
MD-17
Shown
w/Optional
Solution Tank
Steel Clamp Lever
Triple planetary,
permanently,
lubricated with
specially designed
flex coupler to
guard against possible motor
damage when under load.
* Except 1/3 HP and 1/2 HP floor
Adjusts handle position.
Aluminum Apron
For added strength and
rigidity, also shields the
transport wheels to prevent damage.
Non-Marring Bumpers
Prevents damage to furniture and walls.
Wheel Support System
Extra heavy reinforced
six point cast aluminum.
MD-10
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
MD-13
Pristal Premium Floor Machines
®
Professional products for a cleaner environment
175 RPM Floor Machines
The Pristal™ Premium line of floor machines are designed with the NEW “Quick-Release” handle and
“Infinity™ foot pedal on the 17” and 20” units. This combination makes the floor machines the most
ergonomic and simple to operate floor machines on the market today. Field-tested to withstand the
demanding heavy duty use required for stripping, scrubbing and polishing hard surface flooring.
Oversize Handle Grips
For operator’s comfort.
Flexible Dual Triggers
Left or right hand operation,
non-conductive with built-in safety lock-out to prevent
to prevent accidental startup.
NEW “Quick-Release” handle and
“Infinity™ foot pedal on the
17” and 20” units.
Heavy-Duty Switch
PR20E
set in a die cast aluminum switch
box, which won’t chip or rust.
Quick Release Twist Lock Plug
and 50 Ft Extension Cord
Quick release power cord, 3-wire grounded
with water resistant jacket.
specifications
PR13B (13”- 495816)
All Steel Gear
System*
Triple planetary,
permanently,
lubricated with
specially designed
flex coupler to
guard against
possible motor damage when under load.
Motor:
1/2 HP, 120V-60 Cycle, 56 Frame
Current: 6.4 AMPS
Gears: 2 Idler
Brush Speed: 175 RPM
Transport Wheels: 3”
PR17
PR17D (17”- 484512)
Motor:
1 HP, 120V-60 Cycle, 66 Frame
Current: 13.2 AMPS
Gears: 2 Idler
Brush Speed: 175 RPM
Transport Wheels: 5”
*Except PR13B and PR17D are 2 Idler Planetary.
PR17E (17”- 484539)
PR20E 20”- 484571)
Motor:
11/2 HP, 120V-60 Cycle,
66 Frame; Dual Capacitor
Current: 15 AMPS
Gears: 3 Idler
Transport Wheels: 5”
Aluminum Apron
For added strength and rigidity,
also shields the transport wheels
to prevent damage.
Non-Marring Bumpers
Prevents damage to furniture and walls.
PR13B
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Multi Speed Floor Machines / Edger
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
Dual / Variable Speed
specifications
Motor:
11/2 HP, 120V 60-Cycle; 66
Frame Permanent Magnet,
DC Rectified for AC Operation
Gears: 3 Idler
Power Cord:
50 Ft, 14/3 Wire Grounded,
Safety Yellow
Transport Wheels: 5”
Designed for a dual purpose,
these floor machines are an
practical
and
economical
approach when looking for the
most versatile use of floor cleaning equipment.
MTS-17E (379727)
MTS-20E
Current: 13 AMPS
Brush Size: 17"
Brush Speed: 190 or 320 RPM
All steel triple planetary gear system, permanently lubricated with
a specially designed flex coupler
to guard against possible motor
damage when under load.
MTS-20E (379735)
Current: 13.5 AMPS
Brush Size: 20"
Brush Speed: 190 or 320 RPM
MTSV-17E (340022)
Current: 13 AMPS
Brush Size: 17"
Brush Speed: 160 to 320 RPM
Scrub floors at the lower speed
and spray buff floors at the higher
speed with the flip of a switch or
turn of a dial.
MTSV-20E
MTSV-20E (335444)
Equipped with flexible dual triggers
for left or right hand operation
that are non-conductive and have
built-in safety lockouts to prevent
accidental startup.
The heavy-duty switch is set in a
die cast aluminum switch box
that won’t chip or rust.
Current: 13.5 AMPS
Brush Size: 20"
Brush Speed: 160 to 320 RPM
Reinforced cast aluminum apron
housing for added strength and
rigidity. Designed to shield the
transport wheels, protecting
them from damage.
The non-marring rubber bumper
prevents damage to furniture and
walls.
MTS-Dual Speed
The dual speed operates at 190
RPM for scrubbing and 320 RPM
for polishing or spray buffing. Flip
the toggle switch conveniently
located on the switch box to
change brush speed.
MTSV-Variable Speed
The speed of this floor machine can
be adjusted from 160 RPM to 320
RPM by simply turning the dial
located on the motor canopy. This
enables the operator to select
the speed required for the floor
maintenance task at hand.
MWB90 Scrubber / Edger
The MWB90 cleans in small and
hard to reach areas. It operates
in the horizontal and vertical
position to clean edges, grout,
baseboards, under furniture and
into corners.
specifications
MWB-90 (307262)
Motor:
120 Volt, 1/4 HP 60 Cycle
Watts: 192
Current: 1.6 AMPS
Brush Speed: 1075 RPM
Cleaning Path: Up to 6”
Wheels: 4” Non-Marking
Power Cord:
25 Ft 3 Wire Grounded
Safety Yellow
Optional:
Flex Drive (314501)
Uses 6” to 6.5” pads
The three-way vertical brush
operates left, right and center
with lockable brush alignment.
Independent dual trigger controls
for left or right hand operation
have protective shields to prevent
accidental startup.
MWB-90
Equipped with a positive non-slip
cog belt and pulley drive system
for long life.
Handle is fully adjustable and
stores in the upright position.
The vertical 8” brush includes
a permanently mounted 6”
cylindrical sectional brush, 3”
polyester upper section and
lower 3” Tynex section. The 2”
removable bottom section is
tynex.
The optional
flex drive
turns the
edger into a
mini scrubber/buffer
with a pad
speed of
1075 RPM, accommodating a 6”
diameter floor pad. This is perfect for buff or scrub hard floor
surfaces in and around elevators, obstructions, and other
small areas.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Floor Brushes and Pad Drivers
®
Professional products for a cleaner environment
Standard Floor Machines and Burnishers
Standard Brush
Showerfeed Brush
Pad Drive Assembly
Union Mix / Polishing Brush
Nylon / Showerfeed Brush
Tampico / High Luster Polishing Brush
Mixture of Tampico and Palmyra fibers, for general polishing on resilient floor coverings,
cement, quarry tile, terrazzo or marble.
The flexible nylon is supple enough to gently
scrub carpets and is used extensively for
shampooing carpets. Even distribution of solution is permitted through drip holes when using
a solution tank (334898) to dispense liquid.
Tampico is a natural fiber used for high luster
polishing. Especially good for marble, terrazzo
and wood floors.
10"
13"
15"
17"
-
Standard Brushes
336319
20" - 355364
355321
21" - 334367
354880
22" - 340375
315028
24" - 354902
Bassine / Scrubbing Brush
A natural fiber used for heavy scrubbing on
quarry tile, resilient floor coverings, terrazzo or
cement. Order a showerfeed brush for use with
a solution tank (334898) to dispense liquid for
scrubbing and polishing.
10"
13"
15"
17"
-
Standard Brushes
336300
20" - 355410
355380
21" - 334383
457361
24" - 355429
315036
Showerfeed
13" - 355577
15" - 355585
17" - 334553
Brushes
20" - 355593
21" - 334588
24" - 355607
13" - 355615
15" - 355623
17" - 334650
20" - 355631
21" - 334693
24" - 355658
10"
13"
15"
17"
-
Standard
340278
355488
355496
334421
Brushes
20" - 355518
21" - 334456
22" - 340391
24" - 355526
Pad Drive Assembly for Floor Machines
Pad Drive Assembly for Burnishers
When using a floor machine the pad driver
gives you an ability to strip, scrub, or polish by
simply changing floor pads. Standard or poly
showerfeed pad drive assemblies are available.
Permanently mounted pad drivers with threaded
pad centering device is standard on all burnishers. Available with flex drive or rigid assembly.
10"
13"
15"
17"
-
Standard for 175 RPM
340286
20" - 355348
334804
21" - 334847
334812
24" - 355356
334820
Showerfeed for
175/250 RPM, Dual/Variable &
QuarryMaster
10" - 411817
17" - 325783
13" - 332674
20" - 330337
15" - 340316
24" - 330345
20" Flex Drive - 307491
20" Rigid Drive - 384267
Diamond Disc Driver
For the QuarryMaster™ only
10" - 411582
17" - 329126
20" - 411116
24" - 339687
Grit Floor Machines Brushes
Black 80 Girt
Blue 180 Grit
Grey 500 Grit
Aggressive brush for general scrubbing or
stripping finishes from hard surfaces.Effectively
cleans wide grout lines.
Excellent general scrubbing brush for frequent
maintenance cleaning. Flexible enough for cleaning narrow grout lines and uneven surfaces.
Offers the durability of Grit brushes with minimum aggression.For daily scrubbing of a variety
of tiles, marble, terrazzo and non-slip finishes
80 Girt for 13”
80 Girt for 17”
80 Girt for 20”
214787
214809
218537
180 Girt for 13”
180 Girt for 17”
180 Girt for 20”
214795
214817
218545
500 Girt for 13”
500 Girt for 17”
500 Girt for 20”
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
214752
214760
218707
Steel and Stainless Steel Vacuums
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
Dry and Wet / Dry Vacuums
specifications
1 HP Dry Vacuums
with 11/2” Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage Air Thru;
94 CFM - Waterlift 90”
Push Handle
Chrome plated steel on
glidemoble style vacuums.
605D (343838)
Recovery Capacity:
31/2 Gallon Wet / .50 Bu Dry
1005D (303070)
Recovery Capacity:
7 Gallon / .90 Bu Dry
Motor Head Assemblies
Durable steel or cast aluminum
with choice of 1, 1.3, 2, or
2.3 HP motors. Equipped
with 30 Ft, 3 wire grounded
safety yellow line cord.
1.3 HP Wet/Dry Vacuums
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By Pass;
94 CFM - Waterlift 84”
605D
Three Holdown Clamps
1010W (303798)
Chrome plated spring steel with
non-marring tips to ensure a
positive vacuum seal.
1510W (311634)
Stainless Steel & Cold Rolled Tanks
2010W (348716)
Feature reinforcing ribs to
strengthen tanks for handling
higher waterlift. Double roll over
bottom seal prevents leaking.
Recovery Capacity:
7 Gallon Wet / .90 Bu Dry
Recovery Capacity:
12 Gallon Wet / 1.60 Bu Dry
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
8” Rear Wheels
2 HP Wet/Dry Vacuums
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By Pass;
112 CFM - Waterlift 106”
Standard on glidemobile units.
21/2” Ball Bearing Swivel Casters
1010W
2012SSW
1012W (319392)
Recovery Capacity:
7 Gallon Wet / .90 Bu Dry
1512W (319430)
Recovery Capacity:
12 Gallon Wet / 1.60 Bu Dry
2012W (319465)
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
The “Trap-Sack”® dry filtration system
is standard on all vacuums. Includes
removable cloth filter and large totally
enclosed disposable paper filter bag for
greater filtration area. The filter bag
makes it easy to dispose of collected
material.
2.3 HP Wet/Dry Vacuums
Wet pickup adaptor is included with all
wet/dry vacuums. The automatic float
shutoff protects the by-pass motor
from water damage when removing liquids.
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By Pass;
115 CFM - Waterlift 110”
1015W (304069)
Recovery Capacity:
7 Gallon Wet / .90 Bu Dry
1515W (311928)Recovery
Recovery Capacity:
12 Gallon Wet / 1.60 Bu Dry
2015W (316695)
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
Note: See page 22 for complete
vacuum specifications.
Two front casters on 12 and 16 gallon tanks
and four on 31/2 and 7 gallon tanks
1
1515W
Note:
See the Mastercraft
Professional Equipment
Line Price List for our full
line of dry and wet/dry
tank vacuums.
The 1 /2” swivel hose connector fits
tank inlet for vacuuming or motor head
exhaust fitting (on most models) for
blowing applications. Optional in 11/4”,
and 2” connectors are available.
Convenience outlet is built-in to most
motor heads for use with an electric
power nozzle to deep clean carpets.
The dry and wet/dry vacuum are
equipped with the follow tools:
5 Ft Metal Wand
10 Ft Vinyl Hose
11/2” Swivel Hose Connector
14” Metal Carpet Tool
14” Metal Floor Tool
11” Plastic Crevice Tool
6” Upholstery Tool
14” Metal Squeegee (Wet/Dry Kit Only)
The 7, 12, and 16 gallon stainless steel
tanks are equipped with a drain valves.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Poly Wet / Dry Vacuums
®
Professional products for a cleaner environment
specifications
Wet / Dry Tank Vacuums
1.3 HP Wet/Dry Vacuums
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By-Pass;
94 CFM - Waterlift 84”
Push Handle
Chrome plated steel on
glidemoble units.
P4510W (369853)
Recovery Capacity:
5 Gallon Wet / .70 Bu Dry
Motor Head Assemblies
Durable steel or cast aluminum with
choice of 1, 1.3, 2, or 2.3 HP
motors. Equipped with 30 Ft, 3 wire
grounded safety yellow line cord.
P4810W (371777)
P4810W
Chrome plated spring steel
with non-marring tips to
ensure a positive vacuum seal.
P4812W (319562)
Recovery Capacity:
8 Gallon Wet /1.10 Bu Dry
Rotationally Molded Tank
P41512W (319600)
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
High impact plastic, won’t
leak or dent and resist
chemical attack.
P42012W (328707)
Recovery Capacity:
20 Gallon Wet / 2.20 Bu Dry
8” Rear Wheels
2.3 HP Wet/Dry Vacuums
On glidemobile style vacuums.
P4512W
Ball Bearing Swivel Casters
5, 8 and 16 gallon tanks are
equipped with 21/2” casters and
20 gallon tanks with 3” casters.
Convenience outlet is built-in to
most motor heads for use with an
electric power nozzle.
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By Pass;
115 CFM - Waterlift 110”
P4815W (371785)
Recovery Capacity:
8 Gallon Wet /1.10 Bu Dry
P41535W
P41515W (375128)
“Trap-Sack”® dry filtration system is
standard on all vacuums. Includes
removable cloth filter and large totally enclosed disposable paper filter
bag for greater filtration area. The
filter bag makes it easy to dispose
of the collected material.
The 11/2” swivel hose connector
fits tank inlet for vacuuming or
motor head exhaust fitting (on most
models) for blowing applications.
Optional 11/4” and 2” connectors
are available.
2 HP Wet/Dry Vacuums
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 2 Stage By Pass
112 CFM - Waterlift 106”
Holdown Clamps
Wet pickup adaptor is included with
all wet/dry vacuums. The automatic
float shutoff protects the by-pass
motor from water damage.
Recovery Capacity:
8 Gallon Wet / 1.10 Bu Dry
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
P42015W (328898)
Recovery Capacity:
20 Gallon Wet / 2.20 Bu Dry
2 HP Wet/Dry Vacuums
The dry and wet/dry vacuum are
equipped with the following tools:
5 Ft Metal Wand
10 Ft Vinyl Hose
11/2” Swivel Hose Connector
14” Metal Carpet Tool
14” Metal Floor Tool
11” Plastic Crevice Too
6” Upholstery Tool
14” Metal Squeegee (Wet/Dry Kit
Only)
The 16 and 20 gallon poly tanks are
equipped with a gate valve.
with 11/2” Wet/Dry Tool Kit
Vacuum Motor:
120 Volt, 3 Stage By Pass;
92 CFM - Waterlift 135”
P4835W (411728)
Recovery Capacity:
8 Gallon Wet /1.10 Bu Dry
P41535W (329800)
P42035W
Note: See the Mastercraft
Professional Equipment Line
Price List for our full line of dry
and wet/dry tank vacuums.
Recovery Capacity:
16 Gallon Wet / 2.00 Bu Dry
P42035W (318701)
Recovery Capacity:
20 Gallon Wet / 2.20 Bu Dry
Note: See page 22 for complete
vacuum specifications.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Pristal Premium Vacuums
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
specifications
AG20 Poly Wet / Dry
AG20 (487775)
Vacuum Motor:
2 HP 120 Volt, 2 Stage By Pass
CFM: 112
Waterlift: 106”
Current: 11.0 AMPS
Sound Level: 75 dB
Wet Capacity: 20 Gallon
Dry Capacity: 2.20 Bushel
Motor Head Assembly
Durable steel 2 HP motor. Equipped
with 30 Ft, 3 wire grounded cord.
Push Handle
Chrome plated steel.
Optional:
11/2” Swivel Connector (349445);
Tool Kits (See Pg 15)
Holdown Clamp
Chrome plated spring steel with
non-marring tips to ensure a
positive vacuum seal.
Rotationally Molded Tank
High impact plastic, won’t
leak or dent and resist
chemical attack.
10” Rear Wheels
Tilts tank forward so tank can be
drained fully when removing liquids
from the tank.
AG5 motor head setup for dry
pickup. Also use for the AG20.
3” Front Swivel Casters
Ball bearing swivel for excellent mobility.
Front Drain Hose
Allows for quick evacuation of
liquids directly from tank.
AG5 Poly Wet / Dry Vacuums
AG5 motor head setup for liquid
pickup. Also used for the AG20.
specifications
AG5 (479578)
Vacuum Motor:
1.3 HP 120 Volt, 2 Stage By Pass
CFM: 94
Waterlift: 84”
Current: 11.0 AMPS
Sound Level: 75 dB
Wet Capacity: 5 Gallon
Dry Capacity: .70 Bushel
The AG5 is designed for the price
conscious customer who requires
quality and durability in a vacuum
at an economical price.
The “Trap-Sack”® dry filtration
system on both the AG20 and
AG5 includes foam filter and large
totally enclosed disposable paper
filter bag for greater filtration
area and easy to dispose of collected material.
Equipped with a 1.3 HP motor
with built-in wet pickup adaptor
that protects the by-pass motor
from water damage when picking
up liquids.
Rotationally molded tank is
equipped with four 21/2” swivel
casters and three chrome plated
spring steel holdown clamps with
non-marring tips to ensure a
positive vacuum seal.
Note: AG5 and AG20 are not shipped with 11/2” Swivel Hose Connector
(349445) and Tool Kits, see Pg 15 for optional kits and tools.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Drum Adaptor Vacuums
®
Professional products for a cleaner environment
King Size Vacuums
specifications
Converts a drum into a king size
vacuum for dry or wet pickup.
Drum adaptor vacuums are the
perfect solution for any job that
requires a vacuum with an extra
large capacity.
Vacuum Motor:
120V, 2 Stage 2 HP By Pass;
112 CFM - Waterlift 106”
DA-1512 (320064)
Fits 55 Gallon Drum Only
DAK-1512 (320072)
Fits 35 - 65 Gallon Drum
DA-1512
Ideal for heavy-duty boiler cleaning, flood control, recovery of
materials for reprocessing, construction cleanup, and industrial
applications.
Vacuum Motor:
120V, 2 Stage 2.3 HP By Pass;
115 CFM - Waterlift 110”
DA-1515 (300942)
Fits 55 Gallon Drum Only
DAK-1515 (396540)
Fits 35 - 65 Gallon Drum
Drum adaptor kits for dry pickup
includes a motor head, drum adaptor, hose connector and dry filter
assembly.
When used for removal of liquids
an optional wet pickup adaptor is
required.
DA-Series low neck adaptor is
designed for 55 gallon drums.
DAK-Series high-neck for 35 thru
65 gallon drums. The drum is not
included.
Optional accessories include
dacron filter (300888), drum
dolly (320579) for portability,
HEPA filter assembly (382515)
and cleaning attachments to meet
specific cleanup requirements.
Vacuum Motor:
120V, 2 Stage 3-1HP Tang
By Pass; 230 CFM - Waterlift 82”
DA-1540 (363588)
Fits 55 Gallon Drum Only
DAK-1540 (363626)
Fits 35 - 65 Gallon Drum
DA-1540
Optional Tools and Accessories
11/2” Wet / Dry Tool Kit
11/2” Wet/Dry Tool Kit
(416002)
Tool Kit Includes:
5 Ft Metal Wand (421898)
10 Ft X 11/2” Vinyl Hose (344680)
11/2” Swivel Hose Connector (349445)
14” Metal Carpet Tool (456993)
14” Metal Floor Brush Tool (456365)
14” Metal Squeegee Tool (456373)
11” Plastic Crevice Tool (312444)
6” Upholstery Tool w/Brush (374083)
Air-Operated:
Non-Electric, 170* CFM (Output),
Waterlift 250” (165” Safety Control)
DA-MAV16 (313637)
Fits 55 Gallon Drum Only
DAK-MAV16 (313718)
Fits 35 - 65 Gallon Drum
*Based on ID 1/2” Airline @ 70 CFM,
90 PSI Minimum Required
2” Wet / Dry Tool Kit
2” Wet/Dry Tool Kit (360988)
Tool Kit Includes:
15 Ft X 2” Hose (465984)
2” Swivel Hose Connector (360473)
45” Tapered Metal Wand (465879)
20” Squeegee/Floor Brush (465895)
15” Crevice Tool (465909)
41/2” Utility Tool (421685)
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Poly Wet / Dry Vacuums
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
specifications
IT ® Single & Dual Motor
IT1-1566 (301965)
Vacuum Motor:
120V, 2 Stage 1.3 HP; By-Pass
110 CFM - Waterlift 98”
Current: 8.5 AMPS
Sound Level: 74dB
Recovery Capacity:
15 Gallons Wet / 1.8 Bushels Dry
Power Cord:
27 Ft, 3 Wire Grounded
IT® vacuums are designed for the
price conscious customers who
require durability and quality in a
large capacity vacuum at an economical price.
Corrosion resistant injection
molded head, tank with built-in
debris deflector and trolley, won't
dent and is resistant to chemical
attack.
IT2-1567 (301930)
Vacuum Motors:
(2) 120V, 2 Stage 1 HP; By-Pass
CFM: 85 (Ea Motor) - 170 Total
Waterlift: 95”
Current: 6.5 AMPS (Each Motor)
Sound Level:
69dB (One) - 73dB (Two)
Recovery Capacity:
15 Gallons Wet / 1.8 Bushels Dry
Power Cord:
27 Ft, 3 Wire Grounded
IT Tool Kit includes:
10 Ft Vinyl Hose; 2 Pc Aluminum
Wand; 16" Squeegee Tool; 16" Floor
Tool; Crevice Tool; Dusting Brush
IT1-1566
Large 15 gallons wet and 1.8
bushel dry recovery capacity.
The built-in and removable foam
sensitive float shut-off eliminates
the need for a separate wet
adaptor.
Multi layer dry filter system
includes washable cloth filter
and disposable impact filter.
IT2-1567
w/24”
Squeegee
Attachment
IT2-1567
specifications
Structurally reinforced trolley is
designed with an extra wide
handle and 23” wheel base for
wide track stability.
Optional squeegee attachment
(314137) converts the vacuum
to an on board wide area wet
pickup unit.
Contractors Vacuums
Vacuum Motor:
120 Volt, 2 Stage 1.3 HP; By-Pass
94 CFM - Waterlift 84”
Current: 7.5 AMPS
Sound Level: 73dB
Power Cord:
30 Ft, 18/3 Wire Grounded
Safety Yellow
The contractor’s wet/dry and
squeegee vacuums are designed
for the price conscious customer
who requires quality and durability
in a vacuum at an economical
price.
P4821W (345172)
with 11/2” Wet/Dry Tool Kit
Tank: 8 Gal Capacity, 4 Caster
P4821
P41521W (345164)
with 11/2” Wet/Dry Tool Kit
Tank: 16 Gal Capacity, Glidemobile
They are equipped with a 1.3
HP motor with built-in wet pickup adaptor that protects the
by-pass motor from water damage when picking up liquids.
Rotationally molded tanks are
equipped with three chrome
plated spring steel holdown
clamps with non-marring tips to
ensure a positive vacuum seal.
P41521SQ squeegee vacuum is
equipped with a 30” squeegee
attachment. It is excellent for
rapid removal of liquid recovery
after washing and stripping
floors, or for flood control.
The “Trap-Sack”® dry filtration
system includes removable cloth
filter and large totally enclosed
disposable paper filter bag for
greater filtration area and easy to
dispose of collected material.
P41521SQ (375039)
with Squeegee Attachment
Tank: 16 Gal Capacity, Glidemobile
Wet/Dry Tool Kit Includes:
5 Ft Metal Wand; 10 Ft Hose;
11/2” Swivel Hose Connector;
14” Metal Carpet Tool; 14” Metal
Floor Tool; 14” Metal Squeegee
6” Upholstery Tool; 11” Crevice Tool
Switches are shielded to prevent
water from coming in contact
with them.
Tip-It® easy to empty evacuation
system, lift up tank and tilt back
or remove tank from dolly using
the quick release system.
P41521SQ
w/E-Z Lift
Squeegee
The P4821W and P51421W
comes with a wet/dry tool kit.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Compact Vacuums and Blower
®
Professional products for a cleaner environment
QuietMaster ® Dry
QuietMaster® is designed for
quiet, quick cleanup in small and
confined areas. Ultralight and
compact this vacuum is easy to
lift, carry and operate.
It is excellent for cleaning in any
environment where the noise level
must be kept to a minimum.
Quadruple filter system has a
greater filtration area that consists of a disposable paper filter bag, removable cloth filter,
micron filter and motor filter.
specifications
Vacuum Motor:
120 Volt, 1.1 HP Air-Thru
115 CFM - Waterlift 71”
Current: 7 AMPS
Power: 840 Watts
Sound Level: 62dB
Capacity: .21 Bushels
Line Cord: 23 Ft
Tool Kit Includes:
Vinyl Hose; Wand; Crevice Tool;
Upholstery Tool; Dusting Brush;
Carpet/Floor Tool
Designed with a noise absorbing
motor housing for quiet operation.
Molded of hi-impact plastic to
withstand years of professional
use.
The QuietMaster® is equipped
with 5 swivel casters for excellent
stability and mobility.
Cord holder is molded into
motor head for easy access and
storage.
QuietMaster® (363782)
with Dry Tool Kit
QuietMaster®
specifications
Economy Steel Wet / Dry
The economy wet/dry vacuums
are designed for wet and dry pickup. The built-in float cage with
foam filter eliminates the need for
a separate wet adaptor.
Vacuum Motor:
120 Volt, 1 Stage By-Pass;
133 CFM - Waterlift 50”
Current: 6.0 AMPS
Sound Level: 75dB
Optional SQ1-EZ squeegee fits
the glidemobile style vacuums for
rapid liquid recovery after washing
and stripping floors.
609E (318981)
20 gauge cold rolled steel tanks
are finished with epoxy interior
and powder coated exterior.
The motor heads are molded of
durable plastic and equipped
with a 1 or 1.3 HP by-pass
motor for fast removal of dirt,
soot or liquids.
1 HP Vacuums
Tank: 31/2 Gal Capacity - 4 Caster
1009EPH (395471)
Tank: 7 Gal Capacity - Glidemobile
609E
1.3 HP Vacuums
Economy models are available
with 4-caster or glidemobile style
CRS tanks and includes a 11/2”
wet/dry tool kit.
1011EPH
Motor:
120 Volt, 2 Stage By-Pass;
94 CFM - Waterlift 84”
Current: 7.5 AMPS
Sound Level: 75dB
611E (319007)
Tank: 31/2 Gal Capacity - 4 Caster
1011EPH (398586)
Tank: 7 Gal Capacity - Glidemobile
Big Red ™ Hand Blower
Sturdy and versatile, Big Red™ is
designed for heavy use. It’s unique
shape enhances the vortex and
directs a large volume of air at a
high velocity through the molded
3/4” nozzle.
Spun aluminum body with a
painted finish.
A high volume of air can be
directed to hard to reach areas
or for inflatables.
specifications
Motor:
120 Volt, 2 Stage 1 HP Air-Thru;
94 CFM - Waterlift 90”
Power Cord:
30 Ft, 18/3 Wire Grounded
Equipped with thumb switch for
one hand operation and 30 foot
power cord for working large
areas without changing outlets.
B650
B650 (300225)
w/Blower Nozzle
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Compact Dry HEPA Vacuums
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
EnviroMaster™ 7 Dry HEPA
specifications
Easy to carry and transport, this
compact vacuum is suited for
cleanup in small and confined
areas.
Vacuum Motor:
120 Volt, 2 Stage 1.3 HP By-Pass;
94 CFM - Waterlift 84”
Current: 7.5 AMPS
Sound Level: 78dB
Recovery Capacity: .70 Bu Dry
Power Cord:
30 Ft, 18/3 Wire Grounded
The filter system consists of a
certified absolute 12” HEPA filter,
intermediary 2 ply micro filter and
2 ply disposable filter bag.
P4710HVAF (369888)
with 11/4” Dry Tool Kit
Tool Kit Includes:
10 Ft Hose; Hose Connector;
(2) Straight Wands; Crevice Tool;
2-Way Carpet Tool; Floor Tool
Upholstery Tool; Dusting Brush
The HEPA filter has a minimum
efficiency rating of 99.97% at
0.3 microns HOT DOP method
certified @ 100 CFM.
P4710DAF (369861)
P4710DAF
with 11/2” Dry Tool Kit
Tool Kit Includes:
10 Ft Hose w/Hose Connector;
Metal Wand; Crevice Tool; Floor;
Tool; Upholstery Tool; Carpet Tool
Vacuums are shipped with HEPA
filter, intermediary 2 ply disposable filter bag (5/Pk), and dry tool
kit.
HEPA Dry Backpack
This lightweight stainless steel
backpack vacuum is excellent for
use in hard to reach areas and
are available in electric and airoperated models.
specifications
410SSDAF (302775)
with 1 / ” Tool Kit
1 2
Vacuum Motor:
120 Volt, 2 Stage 1.3 HP By-Pass;
94 CFM - Waterlift 84”
Current: 7.5 AMPS
Sound Level: 78dB
Recovery Capacity: .40 Bu Dry
Power Cord:
30 Ft, 18/3 Wire Grounded
Safety Yellow
The tank is rotationally molded, of
high impact plastic with 1/4” wall
constructions. No-tip base design
has low center of gravity.
Equipped with four 21/2” swivel
casters and three heavy-duty
chrome plated spring steel
holdown clamps to ensure a positive vacuum seal.
The filter system consists of a
certified absolute 12” HEPA filter
intermediary 2 ply micro filter and
2 ply disposable filter bag.
410-SSDAF
The HEPA filter has a minimum
efficiency rating of 99.97% at
0.3 microns HOT DOP method
certified @ 100 CFM.
The electric unit is equipped with
a durable poly head with 1.3 HP
by-pass motor
The air-operated vacuum has a
durable steel venturi head and is
designed with a built-in safety
pressure control and gauge.
The automatic pressure release
safety valve on the MAV-410 is
pre-set at the factory to maintain
constant operation efficiency.
The vacuum tank is fabricated of
high quality, heavy-duty stainless
steel that protects against
corrosion.
MAV-410SSDAF (325724)
with 11/2” Tool Kit
Venturi Head: Non Electric
CFM*: 170 Output / Working 100
Recovery Capacity: .40 Bu Dry
Strap it on your back, the 410SS
is especially useful to clean in
hard to reach and limited access
areas.
*Based on ID 1/2” airline @ 70 CFM,
90 PSI Minimum Requirement
Dry Tool Kit Includes:
10 Ft Hose w/Hose Connector;
Metal Wand; Crevice Tool; Floor
Tool; Upholstery Tool; Carpet Tool
The easily detachable back
frame can be removed to create
a lightweight canister vacuum.
The vacuums are shipped with
HEPA filter, intermediary 2 ply
disposable filter bag (5/Pk), 2 ply
micro filter (2/Pk), and dry tool
kit.
MAV-410SSDAF
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Compact Dry HEPA Vacuums
®
Professional products for a cleaner environment
EnviroMaster™ 9 Dry HEPA
specifications
This compact HEPA vacuum is designed the removal of hazardous
waste in hospitals, clean rooms, laboratories or wherever air and
dust pollutants exist.
Cord Wrap Hooks
For storage of power cable
when not in use.
Power Cord
33 Ft, 3 wire grounded with
removable power cord connection.
Extremely Quiet Motor
Vacuum Motor:
110 Volt, 2 Stage 1.6 HP;
106 CFM - Waterlift 98”
Watts: 1200
Sound Level: 60dB
Power Cord:
33 Ft, 3 Wire Grounded
Safety Yellow
Recovery Capacity: 9 Quarts
CT9 (457868) with Tool Kit
CT9-PWR (202312)
with Power Nozzle
Powerful 1.6 motor with a
sound level of 60dB.
Vacuum Body
Molded of polypropylene plastic,
won’t dent or crack and is
resistant to chemical attack.
Front 2” Dual Wheel Swivel Casters
Equipped with two extra wide casters for
excellent stability and mobility.
5 Stage Filter System
HEPA Exhaust Filter
Easy access for replacing,
slide out the old filter and
slide in the new filter.
Designed with a unique 5 stage
filtration system that includes two
hospital grade HEPA filters, HEPA
filter cartridge and motor exhaust
HEPA filter and paper filter bag.
Holdown Clamp
Just lift up the clamp to release
motor head from the tank.
3” Rear Wheels
Extra wide for excellent stability
and mobility.
CT9-PWR Vacuum
The CT-9 shown with the 5340BP-CT9
power nozzle that includes the electrified
hose and wand.
Tool Kit Includes
Telescopic Wand (459364)
Curved Elbow Wand (459399)
9 Ft Vinyl Hose (460052)
Dusting Brush (458341)
Plastic Crevice Tool (458333)
Plastic Floor Tool (459356)
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Compact and Backpack Vacuums
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
EnviroMaster™ 6 HEPA
The EnvrioMaster™ 6 is equipped
with a 1 HP motor. It is lightweight, easy to transport and
ultra compact, makes the it ideal
for use in small and confined
areas.
specifications
Vacuum Motor:
110 Volt, 1 Stage 1HP
Sound Level: 69dB
Power Cord:
33 Ft, 3 Wire Grounded
Safety Yellow
Recovery Capacity: 6 Quarts
The size of this vacuum makes it
excellent for removal of hazardous
waste in hospitals, clean rooms,
laboratories or wherever air and
dust pollutants exist.
CT-6 (487457) with 11/4” Tool Kit
CT-6
The vacuum body is molded of
polypropylene plastic that won’t
dent or crack and is resistant to
chemical attack.
The filtration system consists of a
a lifetime filter, HEPA filter and
disposable paper filter bag.
specifications
Motor:
120 Volt, 2 Stage 1.5 HP
Air-Thru; 120 CFM - Waterlift 97”
Current: 9.6 AMPS
Sound Level: 69dB
Capacity: 10 Qts - P307A
Capacity: 6 Qts - P307AJR
Power Cord: 50 Ft Extension
Tool Kit Includes:
3-1 Stretch Hose (2 Ft to 6 Ft)
2 Pc Aluminum Wand; Crevice Tool;
Upholstery Tool; Carpet Tool;
Round Dusting Brush
It is equipped with a 33 Ft 3 wire
grounded power cord that is
removable.
Includes 11/4” Tool Kit:
Telescopic Wand (459364)
Curved Elbow Wand (459399)
9 Ft Vinyl Hose (460052)
Dusting Brush (458341)
Plastic Crevice Tool (458333)
Plastic Floor Tool (459356)
Probe™ / Probe Jr Backpack
P307A
P307A-14 (423238)
with 14” Dry Tool Kit
P307A-16 (424773)
with 16” Dry Tool Kit
P307AJR-14 (458856)
with 14” Dry Tool Kit
Lightweight, compact and quiet,
the Probe™ is designed for user
comfort with a operating weight
of only 11 lbs.
Elastic holder on harness holds
the tools for ease of access and
storage.
The molded hi-density polyethylene tank and frame with cord
wrap, won't dent and is corrosion
resistant.
The four layer filtration system
consists of micro cloth, micro
bag, motor filter and dual cell
noise filter to maintain maximum
cleaning efficiency, clean air environment and reduced noise level.
Molded top with holdown clamps
on the Probe™ and Probe™ Jr
with screw-on top ensures a positive vacuum seal and easy access
to filter and motor.
Top fill design reduces clogging
and allows the filter bag to reach
maximum fill capacity.
Ergonomically designed frame
with lumbar support reduces
back fatigue, especially during
extended operation.
Convenience outlet is
built-in for use with
an electric power
nozzle (426229)
to deep clean
carpets.
The padded shoulder straps and
kidney belt adjusts for operators
comfort.
P307JR
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Vacuum Accessories
®
Professional products for a cleaner environment
E-Z Lift Squeegee Attachments
specifications
Converts a wet/dry vacuum to a
wide area wet pickup unit with
our 30” squeegee attachment.
For Cold Rolled Steel Vacs
SQ1-EZ (218847) 7 Gallon Tank
SQ2-EZ (218855) 12 Gallon Tank
SQ3-EZ (218863) 16 Gallon Tank
New EZ-lift lever located on the
side of the vacuum handle raises
the squeegee system with little
effort.
Excellent for rapid recovery of
liquids after washing and stripping
floors, or for flood control. Floors
are left dry and ready for traffic
immediately.
It is easy to install on a new
and existing glidemobile style
vacuum.
For Stainless Steel Vacs
SQ8-EZ (218871) 7 Gallon Tank
SQ9-EZ (218898) 12 Gallon Tank
SQ10-EZ (218901) 16 Gallon Tank
The squeegee attachments are
equipped with “Air Groove™” blades
for a free and even flow of liquid
into the center of the
air stream.
Optional felt blades or brush
strips are available, replacing
squeegee blades for dry pickup.
For Poly Vacs
SQ4-EZ (218928) 16 Gallon Tank
SQ5-EZ (218936) 20 Gallon Tank
AG20
with NEW
E-Z Lift
specifications
14” Power Nozzles
Extremely quiet, the 5340 is
designed to clean carpeted and
hard surface flooring.
Chevron pattern brush directs
dirt an debris towards the center
for more effective cleaning.
The sleek styling with low profile
enables you to clean under and
around objects.
A quick reacting circuit breaker
protects the motor, belt and
electrical connections from
damage.
Enclosed integrated switches
allows the power nozzle to be
activated when the swivel neck is
released and in the operating
position. It turns off when the
neck is raised up and locked in
place.
Vacuum Motor:
120 Volt
Current: 2.4 AMPS
Brush Speed: 5,500 RPM
Cleaning Path: 14”
5340
5340 (460745) Nozzle Only
5340AP (460753)
for 11/4” Dia Hose
5340BP (460761)
for 11/2” Dia Hose
5006BP-Probe (460788)
for 11/2” Dia Hose (For Probe)
The side mounted cogged belt
eliminates slippage and increases
the life of the belt.
5340APQ (460796)
for 11/2” Dia Hose (For QuietMaster)
5340BP-CT9 (466190)
w/Wand and Electrified Hose
When the neck is locked in the
horizontal position with hose connected the nozzle will not fall over.
(For CT-9 Vacuum)
specifications
17” Power Nozzles
Designed for thorough cleaning of
carpets, the high speed revolving
brush agitates and removes
embedded dirt, grooming fibers for
a cleaner carpet.
Low profile design reaches under
and around furniture, cleaning
right up to the edge of the baseboard.
The heavy-duty wrap around
bumper prevents damage to
walls and furniture.
The 5006 models are lightweight
and have a floating head that
automatically adjusts to the
height of the carpet.
Use to cleaning bare floor by
simply stepping on the switch
located on the top of the power
nozzle.
5006
Vacuum Motor:
120 Volt, 1/13 HP
Current: 1.25 AMPS
Brush Speed: 5,000 RPM
Cleaning Path: 17”
5006AP (335134)
for 11/4” Dia Hose
5006BP (335150)
for 11/2” Dia Hose
5006Kit (390194)
5006BP
with
P4512D
w/11/4” Electrified Hose
5006BP-Probe (426229)
for 11/2” Dia Hose (For Probe)
5006-APQ (408379)
for 11/2” Dia Hose (For QuietMaster)
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Motor Head /Tank Specifications
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
Motor Head Specifications
#05 Steel (14” / 16”)
#09 Poly (14”)
#10 Steel (14” / 16”)
#11 Poly (14”)
#12 Steel (14” / 16”)
#15 Steel (14” / 16”)
#21 Poly (16”)
#35 Steel (14” / 16”)
Motor
Head
Type
HP
Stages
Waterlift
Line
Cord
For Tank
Diameter
Motor
Diameter
Sound
Level
MFG* Motor
Warranty
#05
Air-Thru
1.0
2
#09
By-Pass
1.0
1
840
30 Ft/18-3
14”/16”
5.7”
71dB
2 Years
720
30 Ft/18-3
14”
5.7
75dB
#10
By-Pass
1.3
2 Years
7.5
900
30 Ft/18-3
14”/16”
5.7
78dB
#11
By-Pass
2 Years
94
7.5
900
30 Ft/18-3
14”
5.7
75dB
2 Years
#12
#15
106”
112
11.0
1320
30 Ft/16-3
14”/16”
5.7
75dB
2 Years
110”
115
11.0
1320
30Ft/14-3
14”/16”
7.2
77dB
5 Years
2
84”
94
7.5
900
30Ft/18-3
16”
5.7
73dB
2 Years.
3
135”
92
9.2
1104
30Ft/14-3
14”/16”
7.2
72dB
5 Years.
CFM
AMPS
90”
94
7.0
50”
133
6.0
2
84”
94
1.3
2
84”
By-Pass
2.0
2
By-Pass
2.3
2
#21
By-Pass
1.3
#35
By-Pass
2.0
WATTS
Vacuum Tank Specifications
P45 (14”)
P47 (12”)
#6 (14”)
#10SS (14)
Tank
No
Tank Material
#P45
Polyethylene
1
#6
Cold Rolled Steel
#6SS
Stainless Steel
#P47
#P48 (16”)
#P415 (16”)
Tank
Diameter
Dry Recovery
Capacity
/ 4 ” Poly
14”
22 Gauge
14”
20 Gauge
Polyethylene
#10
#10SS
#P420 (16”)
#15SS (16”)
#20 (16”)
Wet Recovery
Capacity
Drain
Valve
4-Caster
Glidemobile
Push Handle
0.70 Bu
5 Gallon
No
Yes
No
0.50 Bu
31/2 Gallon
No
Yes
No
14”
0.50 Bu
31/2 Gallon
No
Yes
No
1
/4” Poly
12”
0.70 Bu
5 Gallon
No
Yes
No
Cold Rolled Steel
22 Gauge
14”
0.90 Bu
7 Gallon
No
Yes
Yes
Stainless Steel
20 Gauge
14”
0.90 Bu
7 Gallon
Yes
Yes
Yes
#P48
Polyethylene
1
/ 4 ” Poly
16”
1.10 Bu
8 Gallon
No
Yes
No
#15
Cold Rolled Steel
20 Gauge
16”
1.60 Bu
12 Gallon
No
No
Yes
#15SS
Stainless Steel
22 Gauge
16”
1.60 Bu
12 Gallon
Yes
No
Yes
#P415
Polyethylene
1
/ 4 ” Poly
16”
2.00 Bu
16 Gallon
Yes
No
Yes
#20
Cold Rolled Steel
20 Gauge
16”
2.00 Bu
16 Gallon
No
No
Yes
#20SS
Stainless Steel
20 Gauge
16”
2.00 Bu
16 Gallon
Yes
No
Yes
Polyethylene
1
16”
2.20 Bu
20 Gallon
Yes
No
Yes
#P420
Material
Thickness
/ 4 Poly
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Gas and Electric Pressure Washers
®
Professional products for a cleaner environment
Key Grip 2500 Gas
The Key Grip 2500 cold water pressure washer is power by a 6.5
HP Honda engine and is for heavy-duty in outdoor areas.
Therefore, there is no cumbersome power cord and will provide
higher pressure and water flow ratings then our electric unit.
specifications
The Key Grip 2500 high PSI will help break the chemical bond
between the cleaning surface and the dirt. This unit is ideal for
cleaning equipment, building siding, driveways and for preparing
surfaces before painting. It will blast away grease and grime,
remove stubborn concrete stains or strip surfaces for repainting
or restaining.
KG2500 (487597)
Pump: 3 HP
Pump Pressure: 2500 PSI
GPM: 2
Pump Temperature: 165° Max
Gas Engine: Honda 6.5 HP
Current: 20 AMPS
Fuel Capacity: 3.9 Quarts
Includes: 1500 Cart
It is equipped with Triplex ceramic plungers, stainless steel valves,
chemical injection hose, adjustable pressure, 40 ft mon-marking
hose and a trigger gun with 36” wand. Also included are 4 quick
change tips (sizes 0; 15; 25; 40), powder coated frame, 10”
pneumatic tires and a three gallon chemical tank.
KG2500
specifications
Key Grip 1500 Electric
KG1500 (487570)
The Key Grip 1500 electric pressure washer is equipped with a
2 HP pump and is for heavy-duty cleaning in indoor and outdoor
areas. It can be used with cold water or hot water up to 180°.
The Key Grip 1500 is equipped with Triplex
ceramic plungers, stainless steel valves, chemical
injection hose, 35 ft power cord with ground fault
interrupter, mon-marking hose and a trigger gun
with 36” wand. Also included are 4 quick change
tips (sizes 0; 15; 25; 40), and powder coated frame.
The pump pressure is adjustable and 35 Ft power
cord with ground fault interrupter. It is ideal for cleaning food prep
areas, loading docks, siding, sidewalks, etc with less time and
effort.
KG1500
Shown with
Sani-Station
Wall Mounted
Shelf
Pump: 120 Volt, 3 HP
Pump Pressure: 1450 PSI
GPM: 2
Thermal: Mechanical
Current: 20 AMPS
Power Cord:
35 Ft,w/Grounded Fault
Interrupter
Optional Accessories:
KGC Cart Kit (487619)
Sani-Station Wall
Mounted Shelf (487600)
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Carpet Extractor
®
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
MX-1408 Self-Contained
MX-1408 extractor is compact and easy to
operate. There are no external solution lines,
hoses or separate wand to deal with, they are
self-contained. It is excellent for cleaning carpeted areas in hotels, offices, stores, restaurants,
and many other facilities.
Brush assisted forward/reverse action allows for
the extractor to clean carpet fibers in “both”
directions for more effective cleaning while
reducing labor time and effort.
Features
Trigger Lever
Squeeze the trigger to operate in reverse.
Control Switches
Located at operators finger tips, clearly illustrate
and sealed to protect against moisture.
Adjustable, Folding Handle
Folds for convenient storage or
transport and is adjustable for
operators comfort when cleaning.
25 Ft Power Cord
Wraps around, quick release cord holder on back
of handle for storage.
Accessory Quick-Connect
For use with optional accessories
for cleaning upholstery, stair, and in
hard to reach areas.
See-Thru Dome
Allow for constant monitoring of the extractors
cleaning effectiveness.
specifications
Shared 8 Gal Chamber Solution/Recovery System
Holds solution in a bladder and it is pumped out
for the cleaning operation. As the bladder empties
dirty solution is vacuumed up and recovered in the
commonly shared tank.
MX-1408 (338583)
Cleaning Path:
14” w/2 Forward and 2 Reverse
Spray Jets
Vacuum Motor:
120Volt, 1.9 HP - 112 CFM
Waterlift 106”
Brush Motor: 0.5 HP; 2.3 AMPS
Brush Speed: 675 RPM
Water Output:
1.8 GPM (Adjustable)
Pump Pressure: 100 PSI
Capacity Shared:
8 Gallon Solution and Recovery
Power Cord:
25 Ft, 3 Wire Grounded, Plus
25 Ft Extension Cord
Kick Stand
Lifts brush off the floor to protect it when not in
use.
2 Sets of 2 Spray Nozzles
Operate independently, spraying ahead of the
brush when cleaning in either direction. Solution
volume can be adjusted using a directional valve.
Vacuum Shoes
Provide continuous forward and reverse suction
recovering dirty solution in either direction.
Optional Accessories:
15 Ft Solution Hose (408263)
Wand & Nozzle Assembly
w/2 Spray Jets (408271)
Upholstery Tool (379468)
Tank drains fully.
Using a floor drain or the supplied
plastic bucket.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Rebel® Carpet Extractor Line
®
Professional products for a cleaner environment
X-612 Box with Accessories
The X-612 Rebel® extractor is
designed for commercial use to
cleans carpeted area efficiently and
thoroughly.
Fiberglass construction is corrosion
resistant and impervious to cleaning
solutions.
specifications
See-thru dome allows for
constant monitoring of the
extractor’s cleaning effectiveness.
X-612 (217069)
Motor:
120 Volt, (2) 1.3 HP By-Pass,
60 Hz; 15 AMPS
Waterlift: 165”
Pump Pressure: 150 PSI
Capacity:
12 Gal Solution/Recovery
Power Cord: 25 Ft, Safety Yellow
Control switches are convenient
located on the front of the
extractor and covered to
protect against moisture.
The front gate valve is
mounted high for quick
evacuation of recovery
tank into a bucket
or floor drain.
Tank is hinged onto the back of the
motor housing,just release the two
front latches for easy access to
the motors.
The nozzle with
two spray jets
distributes water evenly to the
carpet fibers. Dirt is flushed to the
surface and grimy solution is
removed simultaneously by the
vacuum system.
Accessories Include:
15 Ft Solution/Recovery Hose;
5 Ft Stainless Steel Wand and
12" Nozzle w/2 Spray Jets.
X-612
Optional upholster tool (213845)
for cleaning upholstery, stairs and
in hard to reach areas.
X-405 Box with Accessories
The X-404Rebel® is designed for
cleaning carpets in small and confined areas. It is easy to maneuver
and transport.
See-thru dome allows for
constant monitoring of the
extractor’s cleaning
effectiveness.
Fiberglass construction is corrosion
resistant and impervious to cleaning
solutions.
The front gate valve is
mounted high for quick
evacuation of recovery
tank into a bucket
or floor drain.
Tank is hinged onto the back of the
motor housing, just release the
two front latches for easy access
to the motors.
The nozzle
with 2 spray
jets distributes water
evenly to the carpet fibers.
Dirt is flushed to the surface
and grimy solution is removed
simultaneously by the vacuum
system.
specifications
X-405 (217530)
Motor:
120 Volts, 2 HP By-Pass,
60 Hz; 9 AMPS
Waterlift: 105”
Pump Pressure: 60 PSI
Capacity:
5 Gallon Solution/Recovery
X-405
Accessories Includes:
10 Ft. Solution/Recovery Hose;
5 Ft Stainless Steel Wand
and 12" Nozzle w/ 2 Spray Jet
Optional upholster tool (213845)
for cleaning upholstery, stairs and
in hard to reach areas.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
®
Wide Area Vacuums / Floor Dryer
Tel: 800.835.7812 Visit Our Website: www.mastercraftusa.com
SV/ SVG Wide Area
specifications
Vacuum Motor:
5/8 HP, 120 Volt - 200 CFM
Brush Speed:
SV Models - 3500 RPM
SVG Models - 1650 RPM
Brush Size: 3” Diameter
Inlet: 31/2” Diameter
Capacity: 1.2 Bushel
Power Cord:
60 Ft, 16 Gauge/3 Wire Grounded
Rear Wheels: Two 6” Transport
Front Casters:
Two 2” Double Wheel Swivel
Clean large open areas more efficiently with SV and SVG wide
area vacuums.
Easy to operate and maneuver,
embedded dirt and debris are
picked up and removed, leaving
carpets clean and groomed.
The L-shape/low profile is
designed to clean around and
under furniture with wrap around
bumper to protect furniture and
walls from damage.
SV-240 (380318)
SVG-241 (317608)
Current: 8.0 AMPS
Cleaning Path: 24” Wide
Dimensions:
341/2” L X 251/4” W X 361/2” H
SV240 / SVG-241
SV-280 (380326)
SVG-281 (317624)
Current: 8.5 AMPS
Cleaning Path: 28” Wide
Dimensions:
341/2” L X 29” W X 361/2” H
Chevron pattern brush with four
rows of bristles is designed for
grooming. Dirt and debris is
moved towards the center, while
the “no-fling” brush barrier contains and directs the dirt and
debris into an oversized vacuum
inlet for maximum pickup.
Top-fill system assures maximum
performance and pickup, while
the 3.5" inlet eliminates clogging
at the intake.
The unit’s pile height adjusts to
five settings allowing for maximum cleaning efficiency.
Heavy-duty construction with a
welded steel chassis that is
mounted on a structural foam
housing, provides added durability and strength; yet they are
lightweight (under 75 lbs.) with
excellent maneuverability.
Equipped with a heavy-duty dust
retentive cloth outer filter bag
and large 1.2 bushel capacity
disposable paper filter bag.
The chrome plated steel handle
folds for convenient storage and
transport.
SVG Vac-N-Groom™ models are
equipped with a cog and three
track V-belt drive system with a
2-to-1 ratio that increases torque
and power assists forward movement while enhancing the unit
CFM.
SV280 / SVG-281
XA-300C Floor Dryer
specifications
XA-300C (444960)
Motor:
120 Volt, 1/2 HP - 3 Speed
1500 - 2000 - 2500 CFM
Switch: 3 Speed Rotary
Power Cord:
25 Ft, 16/3 Wire Grounded
XA-300C
Use the airmover for the quick
drying of carpeted or hard floors
and room ventilation.
The cord wrap is molded into
housing for convenient storage of
the power cord.
Rotationally molded of hi-density
polyethylene, won't dent and is
corrosion resistant.
The XA-300C can be used in four
positions, normal, flat on its
back, stacked or tilted at 45
degrees.
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Upright Vacuums with Tools
®
Professional products for a cleaner environment
the QC Single Motor
Durable and lightweight, this
upright offer the advantages of commercial vacuums at an economical
price.
Infinity™ self-adjusting nozzle
adapts to carpet height automatically as you are cleaning.
Equipped with a DualOp™ clean air
high performance motor that provides quality cleaning performance.
Includes fail-safe air relief valve that
protects the motor automatically
from heat overload, metal handle
with vinyl grip and metal cord hook.
specifications
QC-1415 Plus (421952)
Motor:
DualOp™ Clean Air 120 Volt,
60 Hz; 120 CFM - Waterlift 80”
Current: 10 AMPS
Brush Roller: Metal, Ball Bearing
Brush Strips: Replaceable
Drive System: Flat Belt
Power Cord:
50 Ft, 3 Wire Grounded
Quick release system gives easy
access to belt and brush roller. The
belt is quick and easy to change with
NO tools required.
Includes:
Paper Filter Bag; On-Board Tools
Stretch Hose (11/2 to 8 Ft);
Oval Dust Brush; 14” Crevice Tool;
19” Extension Wand.
Front dust cover is easy to remove
for quick access to the filter bag.
Equipped with a metal base plate
and ball bearing metal brush roller
with replacement brush strips.
The QC-1415 has a 14” edge-to
edge brush cleaning path and triple
filtration system that includes a
totally enclosed microply® filter bag,
foam exhaust guard filter and HEPA
filter.
Optional:
Reusable Cloth Filter Bag
(450162)
QC-1415 Plus
specifications
TwinMaster ® Dual Motor
The TwinMasters® with a dual
motor system are designed to meet
the rigorous requirements of daily
commercial cleaning.
One motor is for the vacuum and
another motor drives the agitator
brush to loosen and release embedded dirt from carpets right up to the
baseboard on the right side.
Vacuum Motor:
120V, 1.2 HP, 7.5 AMPS
92 CFM, Waterlift 70”
Brush:
Replaceable Spiral Strips
Drive System:
Long Life Cog Belt
Filter System:
Totally Enclosed Multi-Ply
Disposable Paper Bag,
Motor Inlet and Exhaust Filter
Power Cord:
40 Ft. 3-Wire, Grounded
Capacity: 6 Quarts
Top fill dirt collection system with
triple filter is engineered for maximum dirt recovery, and allows the
disposable paper bag to reach maximum fill capacity without losing
cleaning efficiency.
A thermal overload protects the
motors from overheating and clean
fan system eliminates the possibility
of motor fan breakage.
TM-1495N (408980)
The cog belt drive design is mounted
off center and shielded for a clear
cleaning path.
TM-1495N
The brush strip is easy to remove
and replace.
Constructed of impact resistant
injection molded plastic, and are
equipped with four position carpet
height adjustment and full bag warning indicator.
It’s low profile and offset nozzle
reaches under and around furniture
and in other hard to clean areas.
Brush Motor: 1/5 HP
Current: 1.3 AMPS
Brush Speed: 4,325 RPM
Cleaning Path: 14”
TM-1895 (354643)
Brush Motor: 1/4 HP
Current: 1.3 AMPS
Brush Speed: 5,000 RPM
Cleaning Path: 18”
The brush motor automatically disengages for above-floor cleaning.
Built-in stretch hose, wand and
tools provide the flexibility needed
to clean in hard to reach areas
efficiently and quickly.
Optional:
Reusable Cloth Filter Bag
(398616)
TM-1895
Address: 777 South Street, Newburgh NY 12550 / Tel: 845.565.8850 / Fax: 845.565.9392
Internet Access: www.mastercraftusa.com / [email protected]
Professional Equipment Line
Address
777 South Street, P.O. Box 2310
Newburgh, New York 12550-0606
Call
800.835.7812 • 845.565.8850
Fax
800.752.6883 • 845.565.9392
Internet
www.mastercraftusa.com
E-Mail
[email protected]
Printed in USA 01/01/07 Part No 219436
Professional Equipment Line
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement