Panasonic DMPUB700EB User manual

Add to my manuals
44 Pages

advertisement

Panasonic DMPUB700EB User manual | Manualzz

DMP-UB700_EB-TQBS0019.book 1 ページ 2016年8月26日 金曜日 午後12時2分

Operating Instructions

Blu-ray Disc

TM

Player

Model No.

DMP-UB700

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you are notified.

For details, refer to “Firmware updates” (> 18) or http://panasonic.jp/support/global/cs/ (This site is in English only.)

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Model number suffix “EB” denotes UK model.

EB

TQBS0019

until

2016/9/20

DMP-UB700_EB-TQBS0019.book 2 ページ 2016年8月26日 金曜日 午後12時2分

Precautions

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Small object

Keep the Memory Card out of reach of children to prevent swallowing.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

≥ This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

≥ This unit is intended for use in moderate climates.

≥ Some portions of this unit may become hot during use. When moving or cleaning this unit, disconnect the AC mains lead and wait for 3 minutes or longer.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

2

TQBS0019

DMP-UB700_EB-TQBS0019.book 3 ページ 2016年8月26日 金曜日 午後12時2分

Restriction on use of unauthorized copied content

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

Wireless LAN connection

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit.

Data transmitted and received over radio waves may be

intercepted and monitored.

This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow the following points:

– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (> 35, “To return all settings to the factory preset.”)

≥ The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server: http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is in compliance with the radio standards of the following countries.

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Finland, France, Germany, Greece, Hungary, Ireland, Italy,

Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, United Kingdom, Switzerland

The WLAN feature of this product shall exclusively be used inside buildings.

This product on purpose to connect to access point of 2.4 GHz or

5 GHz WLAN.

TQBS0019

3

DMP-UB700_EB-TQBS0019.book 4 ページ 2016年8月26日 金曜日 午後12時2分

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Reference

Getting started

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 5

Playable media. . . . . . . . . . . . . . . 6

Control reference guide . . . . . . . . 8

Connecting to a TV . . . . . . . . . . 10

Connecting to an amplifier/receiver . . . . . . . . . 11

Connecting to the network . . . . . 16

Settings . . . . . . . . . . . . . . . . . . . 17

Playback

HOME menu . . . . . . . . . . . . . . . 19

Playback. . . . . . . . . . . . . . . . . . . 19

Enjoying Network Service . . . . . . 22

Home Network feature . . . . . . . . 23

VIERA Link. . . . . . . . . . . . . . . . . 25

Option menu. . . . . . . . . . . . . . . . 26

Setup menu. . . . . . . . . . . . . . . . . 29

Troubleshooting guide . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . 40

Licenses . . . . . . . . . . . . . . . . . . . 42

To enjoy Ultra HD Blu-ray Disc featured with

High Dynamic Range (HDR)

If you see a message about High Dynamic

Range (HDR) compatible issue while an Ultra

HD Blu-ray Disc is played back, please check your TV settings as follows.

An example of the message:

“This player is not connected to a High Dynamic

Range (HDR) compatible TV.”

1) If you are using a Panasonic TV compatible with 4K and High Dynamic Range (HDR) released in 2015 or 2016, (DX900/DX800/

DX780/DX750/DX730/DX700 series etc.), please check your TV settings as follows.

– Switch the TV to the HDMI input.

– Press “MENU” button of your TV remote control

– Select “HDMI HDR Setting” in “Setup”

– Select “On” in “HDMI HDR Setting”

2) If you use a TV not from Panasonic, compatible with 4K and High Dynamic Range

(HDR), please refer to the operating instructions of the TV.

3) When you play a High Dynamic Range (HDR) disc on a TV without High Dynamic Range

(HDR) capability, the disc can be played back

(in non-HDR quality) even if the message appears.

4

TQBS0019

DMP-UB700_EB-TQBS0019.book 5 ページ 2016年8月26日 金曜日 午後12時2分

Accessories

Check the supplied accessories before using this unit.

1 Remote control

(N2QAYB001090)

2 Batteries for remote control

1 AC mains lead

(K2CT2YY00098)

≥ Product numbers are provided in these operating instructions correct as of August 2016.

These may be subject to change.

≥ Do not use AC mains lead with other equipment.

Using the remote control

Insert the batteries to the terminal so that it (i and j) matches those in the remote control.

Unit and media care

Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.

This unit’s lens

Use the lens cleaner (not supplied) to clean the unit’s lens.

Clean discs

DO DO NOT

R6/LR6, AA

(Alkaline or manganese batteries)

Point it at the remote control signal sensor on this unit. (> 9)

Wipe with a damp cloth and then wipe dry with a dry cloth.

Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

TQBS0019

5

DMP-UB700_EB-TQBS0019.book 6 ページ 2016年8月26日 金曜日 午後12時2分

Playable media

Device Media markings

BD

Device types

Ultra HD Blu-ray*

1

*

2

BD-Video

BD-RE

BD-R

DVD-Video

Contents format

Video

Video

Video,

JPEG, MPO

Video, MKV,

JPEG, MPO

Video

DVD

DVD-R

DVD-R DL

Video, AVCHD, MKV,

JPEG, MPO,

AAC, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV,

WMA

DVD-RW

Video, AVCHD

+R/+RW/+R DL

Music CD Music [CD-DA]

CD

SD

CD-R

CD-RW

MKV,

JPEG, MPO,

AAC, ALAC, FLAC,

MP3, Music [CD-DA],

WAV, WMA

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro types)

AVCHD, AVCHD 3D,

MP4,

JPEG, MPO

USB

USB devices

(up to 2 TB)

MKV, MP4, MPEG2,

JPEG, MPO,

AAC, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV, WMA

≥ See pages 7 and 40 for more information on the types of content that can be played.

*1

*2

See “Enjoying Ultra HD Blu-ray” (> 21)

Unless otherwise indicated, BD-Video content includes Ultra HD Blu-ray content in these operating instructions.

6

TQBS0019

DMP-UB700_EB-TQBS0019.book 7 ページ 2016年8月26日 金曜日 午後12時2分

Types of discs that cannot be played by this unit

Any other disc that is not specifically supported or previously described.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

Region management information

The unit can play back BD-Video/DVD-Video discs of the following regions codes, including

ALL”:

Example: BD-Video DVD-Video

2

Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

BD-Video

≥ This unit supports high bit rate audio (Dolby ®

Digital Plus, Dolby ® TrueHD, DTS-HD High

Resolution Audio

TM

and DTS-HD Master

Audio TM ) adopted in BD-Video.

3D

≥ 3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI

Cable.

Music CD

Operation and sound quality of CDs that do not comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

SD card

≥ miniSD Cards, microSD Cards, microSDHC Cards and microSDXC Cards can be used, but must be used with an adaptor card.

≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and

FAT16 formats, as well as SDHC Memory

Cards in FAT32 format and SDXC Memory

Cards in exFAT.

≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc.

≥ Usable memory may be slightly less than the card capacity.

≥ For playback of 4K videos stored on an SD card, use an SD card conforming to Class 10 of the SD Speed Class Rating.

USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32 and NTFS. If the HDD is not recognized, the power to the HDD may not be supplied. Supply power from an external source.

BD-RE, BD-R

This unit may not correctly play back the audio portion of a video recorded to a disc in multiple languages with a Blu-ray disc recorder.

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method, and how the files were created.

≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

TQBS0019

7

DMP-UB700_EB-TQBS0019.book 8 ページ 2016年8月26日 金曜日 午後12時2分

Control reference guide

Remote control

When other Panasonic devices respond to the remote control of the unit, change the remote control code. (> 34)

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this unit’s remote control. Some buttons may not work depending on the TV.

3 Select title numbers, etc./Enter numbers or characters

4 Cancel

Clear the currently selected character.

(when entering a password for “Ratings” in the Setup menu, for example)

5 Change soundtrack (> 20)

6 Basic playback control buttons (> 19)

7 Show Pop-up menu (> 20)

8 Show Top menu (> 20)

9 Show Option menu (> 26)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the screen

11 Transmit the remote control signal

12 Open or close the disc tray (> 9)

13 Show the status messages (> 20)

14 Show the screen of the Mirroring function

(> 23)

15 Show the Home screen of the Network

Service (> 22)

16 Exit the Menu screen

17 Show NETFLIX screen (> 22)

18 Show HOME menu (> 19)

19 [3, 4, 2, 1] : Move the highlight for selection

[OK] : Confirm the selection

(2;)(;1) : Frame-by-frame (> 20)

20 Return to previous screen

8

TQBS0019

DMP-UB700_EB-TQBS0019.book 9 ページ 2016年8月26日 金曜日 午後12時2分

Front

6 7

Pull to flip down the front panel.

1 2 3

1 Disc tray

2 Display

3 SD card slot

When removing the SD card, press the centre of the card and pull it straight out.

4 USB port ( DC 5 V 500 mA)

5 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and right

4 5

6 Open or close the disc tray*

7 Standby/on switch* (Í/I) (> 17)

Touch to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

* These buttons work just by touching the marks.

Do not place any objects on or around the buttons.

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.

≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

Rear

6 7

1

1 AC IN ( ) terminal (> 10)

2 LAN port (> 16)

3 HDMI AUDIO OUT terminal (> 11)

4 HDMI VIDEO OUT terminal (> 10)

2 3 4 5

5 DIGITAL AUDIO OUT terminal

(OPTICAL terminal) (> 12)

6 Cooling fan

7 HDMI OUT terminal

Class II equipment (The construction of the product is double-insulated.)

TQBS0019

9

DMP-UB700_EB-TQBS0019.book 10 ページ 2016年8月26日 金曜日 午後12時2分

Connecting to a TV

4K images can be played back when this unit is connected to 4K compatible TV.

≥ Before making any connections, please disconnect all the units from AC power.

(Connect the AC mains lead after making all connections.)

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

≥ This unit consumes a small amount of AC power (> 40) even when turned off in standby mode. For the purpose of energy conservation, the unit should be disconnected if you will not be using it for extended period of time.

Enjoying 4K output

≥ To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.

When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.

It is recommended that you use Panasonic’s HDMI cable.

If you connect this unit to a 4K-compatible TV and perform “Easy Settings”, 4K (50p/60p) will

be automatically selected. (> 17, 34)

≥ To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that supports HDCP2.2, 4K (50p/60p) 4:4:4, and HDR signals that meet Ultra HD Blu-ray standards.

Enjoying video and audio with a 4K-compatible TV

HDMI IN

To a household mains socket

AC mains lead

(supplied)

HDMI cable

(18 Gbps)

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

10

TQBS0019

DMP-UB700_EB-TQBS0019.book 11 ページ 2016年8月26日 金曜日 午後12時2分

Connecting to an amplifier/receiver

Enjoying video with a 4K-compatible TV and audio with an amplifier

You can enjoy richer sound by using the HDMI AUDIO OUT terminal.

(Audio is output in high resolution.)

HDMI cable HDMI cable

(18 Gbps)

HDMI IN HDMI IN

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

≥ The HDMI AUDIO OUT terminal is not compatible with 4K output and the VIERA Link (> 25).

Enjoying video with a 4K-compatible TV and audio with a 4K-compatible amplifier

HDMI cable

(18 Gbps)

HDMI cable

(18 Gbps)

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

Amplifier/receiver

(4K-compatible)

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ About ARC:

When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected using an optical digital cable or coaxial cable in order to enjoy the TV’s sound through the amplifier/receiver.

TQBS0019

11

DMP-UB700_EB-TQBS0019.book 12 ページ 2016年8月26日 金曜日 午後12時2分

Enjoying audio with an amplifier connected to the OPTICAL terminal

Optical digital cable

OPTICAL IN

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

Connecting an amplifier to a 4K-compatible TV

3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.

≥ This connection only supports up to 5.1ch.

≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier must be ARC-compatible. (> 11, “About ARC”)

HDMI cable

(18 Gbps)

HDMI cable

HDMI IN

HDMI IN

(ARC)

HDMI OUT

(ARC)

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

12

TQBS0019

DMP-UB700_EB-TQBS0019.book 13 ページ 2016年8月26日 金曜日 午後12時2分

Enjoying video with a 4K-compatible TV in combination with an amplifier connected to the

HDMI AUDIO OUT terminal and another amplifier connected to the OPTICAL terminal

HDMI cable HDMI cable

(18 Gbps)

HDMI IN HDMI IN

Optical digital cable

Amplifier/receiver

OPTICAL IN

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the other amplifier connected to the OPTICAL terminal.

TQBS0019

13

DMP-UB700_EB-TQBS0019.book 14 ページ 2016年8月26日 金曜日 午後12時2分

Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an amplifier that is connected to the OPTICAL terminal

HDMI cable HDMI cable

(18 Gbps)

HDMI IN HDMI IN

Optical digital cable

Projector

(2K-compatible)

OPTICAL IN

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV:

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

Set “Audio Output” to “On” in “Advanced Settings”. (> 30)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when “Video+Audio” is selected.)

14

TQBS0019

DMP-UB700_EB-TQBS0019.book 15 ページ 2016年8月26日 金曜日 午後12時2分

Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an amplifier that is connected to the HDMI AUDIO OUT terminal and another amplifier that is connected to the OPTICAL terminal

HDMI cable HDMI cable

(18 Gbps)

HDMI OUT HDMI IN HDMI IN

Optical digital cable

Amplifier/receiver

OPTICAL IN

Amplifier/receiver

HDMI IN

HDMI cable

Projector

(2K-compatible)

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when “Video+Audio” is selected.)

≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the other amplifier connected to the OPTICAL terminal.

TQBS0019

15

DMP-UB700_EB-TQBS0019.book 16 ページ 2016年8月26日 金曜日 午後12時2分

Connecting to the network

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 18)

≥ You can enjoy Ultra HD Blu-ray/BD-Live/Network Service (> 21, 22)

≥ You can access other devices (Home Network) (> 23)

≥ This unit supports Direct Access and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc. Internet access is not available while connected via Direct Access. (> 24)

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection

This unit has built-in wireless LAN and can be connected to a wireless router.

Wireless router, etc.

≥ For up-to-date compatibility information on your wireless router, refer to http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services.

≥ See page 3 for the precautions of wireless LAN connection.

LAN cable connection

LAN Cable

Broadband router, etc.

Internet

Internet

≥ Use category 5e or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

16

TQBS0019

DMP-UB700_EB-TQBS0019.book 17 ページ 2016年8月26日 金曜日 午後12時2分

Settings

The following settings can be performed anytime in the Setup menu. (> 32, 34)

Easy Settings

After connecting your new player for the first time and pressing [Í], the basic settings screen will appear.

Preparation

Turn on the TV and select the appropriate video input.

1

Press [Í].

Setup screen appears.

2

Follow the on-screen instructions to continue with the settings.

(e.g., “Quick Start”)

≥ Certain recent models of Panasonic TVs

(VIERA) may automatically apply their language setting to this unit.

When connected to a 4K (50p or

60p)-compatible TV

When connected to a 4K (50p or 60p)-compatible

TV, you can set the video output format.

4K(50p/60p) Output

Start connection check with your 4K TV.

Once connection check is started and if the video is not displayed correctly, please wait for the next display. The connection check could take up to 30 seconds to display the new message screen.

Start

OK

RETURN

Follow the on-screen instructions to set the format.

≥ To reconnect this unit to a 4K (50p or 60p)-compatible TV after connecting this unit to a 2K-compatible TV and completing “Easy Settings”, set “4K(50p/60p) Output” to

“4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”. (> 29)

Easy Network Setting

Select a connection mode.

Wired

Wireless

OK

RETURN

“Wired” connection

Follow the on-screen instructions to apply your connection settings.

“Wireless” connection

Preparation

Before beginning wireless connection setup

Obtain your network name (SSID*

1 ).

If your wireless connection is encrypted,

please be sure that you know your encryption key.

Then follow the on-screen instructions and apply the settings.

PUSH button method*

2

:

If the wireless router supports e.g.

the PUSH button method*

2

, you can connect to and configure the security settings

Link button of your wireless LAN device with ease by pressing the Link button on the router.

1 Press the green button on the remote control.

2 Press Link button or corresponding button of the wireless router until the lamp starts flashing.

≥ For details, refer to the operating instruction of the wireless router.

3 Select “Start”.

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

TQBS0019

17

DMP-UB700_EB-TQBS0019.book 18 ページ 2016年8月26日 金曜日 午後12時2分

Search for wireless network:

≥ The available wireless networks will be displayed on the screen.

Select your network name.

– If your network name is not displayed, search again by pressing the red button on the remote control.

– Stealth SSID will not be displayed when you press the red button on the remote control.

Enter manually by using “Manual setting”.

(> 32)

≥ If your wireless network is encrypted,

Encryption Key input screen will be displayed.

Input the encryption key of your network.

≥ Refer to the operating instructions of the hub or router.

≥ Do not use this unit to connect to any wireless network for which you do not have usage rights.

Using these networks may be regarded as illegal access.

≥ If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC.

≥ Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information.

*1

*2

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

The PUSH button method is a connection method which allows you to set encryption for a wireless LAN connection with ease.

You can connect to a wireless LAN network by pressing a certain button on the wireless access point [Link button,

WPS (Wi-Fi Protected Setup TM ) button, etc.].

Firmware updates

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.*

3

When a new firmware version is available, the following message is displayed.

Firmware Update

New Version: X.XX

Current Installed Version: X.XX

Do you want to start firmware update?

For the update information, please visit the following website: http://panasonic.net/support/

Yes No

OK

RETURN

4

You cannot operate the unit until the update is complete. Don’t remove the AC mains lead during the update. Removing the AC mains lead while the update is in progress may damage the unit.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

4

The firmware has been updated.

Current Version

: x.xx

You can also download the latest firmware from the

following website and store it to a USB device to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. (> 34,

“Firmware Version Information”)

Downloading will require several minutes. It may take

longer or may not work properly depending on the connection environment.

*3

*4

You must agree to the terms of use for the Internet function and the privacy policy. (> 33, “Notice”)

“X.XX” represents the firmware version number.

18

TQBS0019

DMP-UB700_EB-TQBS0019.book 19 ページ 2016年8月26日 金曜日 午後12時2分

Major functions of this unit can be operated from the HOME menu.

Preparation

Turn on the TV and select the appropriate video input.

1

Press [Í] to turn on the unit.

2

Press [OK] or [2, 1] to select the item.

≥ Press [OK] or [3, 4] to select the item if necessary.

Playback

1

Insert the media.

Playback starts depending on the media.

2

Select the item to play and press [OK].

Repeat this step if necessary.

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫STOP] when you have finished playback to protect the unit’s motor, your TV screen and so on.

≥ When the following conditions are met, still pictures are played back in 4K regardless of the image quality.

– The unit is connected to a 4K compatible TV

– “Video Format” is set to “Automatic” or “4K” (> 29)

≥ This unit can not output 4K images when playing back in

3D.

≥ It is not possible to play back AVCHD and MPEG2 videos which have been dragged and dropped or copied and pasted to the media.

≥ To enjoy BD-Video that supports Dolby Atmos

(> 31)

®

or DTS:X

TM

Videos/Music/Photos

Disc

SD Card

USB

Play back the contents.

(> right)

≥ When multiple contents are recorded, select the types of contents or the title.

≥ See “Playable media”

(> 6)

Home Network

Network Contents

Playback

Mirroring

Media Renderer

(> 24)

(> 23)

(> 24)

Network Service

Displays the Home screen of Network Service.

(> 22)

Setup

Player Settings

Wallpaper

(> 29)

Changes the background of HOME menu.

SD Card

Management

(> 21)

To show the HOME menu

Press [HOME].

≥ Items to be displayed may vary with the media.

Operations during playback

Some operations may not work depending on the media and contents.

Stop

Press [STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

On BD-Video discs including BD-J, the

resume play function does not work.

Pause

Press [;PAUSE].

≥ Press [;PAUSE] again or [1PLAY] to restart play.

TQBS0019

19

DMP-UB700_EB-TQBS0019.book 20 ページ 2016年8月26日 金曜日 午後12時2分

Search/Slow motion

Search

While playing, press [SEARCH6] or

[SEARCH5].

≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:

Audio is not heard.

Slow motion

While paused, press [SEARCH6] or

[SEARCH5].

≥ BD-Video and AVCHD: [SEARCH5] only.

≥ MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single step.

≥ Press [1PLAY] to revert to normal playback speed.

Skip

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

Frame-by-frame

While paused, press [2] (2;) or [1] (;1).

≥ Each press shows the next frame.

≥ Press and hold to change in succession forward or backward.

≥ Press [1PLAY] to revert to normal playback speed.

≥ BD-Video and AVCHD: Forward only.

≥ MKV, MP4 and MPEG2: Not effective.

Changing soundtrack

Press [AUDIO].

You can change the audio channel number or soundtrack language, etc.

Show top menu/pop-up menu

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

Show the status messages

While playing, press [STATUS].

The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or disappear from the screen.

≥ Depending on media and contents, the display may change or not appear.

e.g., BD-Video

A

T1 C1

BD-Video

Play

D

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Total time e.g., JPEG

No.

Date 11/12/2010

Size 500 x 375

Manufacturer

Equipment

≥ During music playback, the elapsed time, file name and other relevant information are displayed on the unit’s display.

e.g., MP3

20

TQBS0019

DMP-UB700_EB-TQBS0019.book 21 ページ 2016年8月26日 金曜日 午後12時2分

Enjoying Ultra HD Blu-ray

You can enjoy the playback of Ultra HD Blu-ray discs with this unit.

Preparation

≥ For 4K/HDR viewing, connect to a device and terminals that support HDCP2.2*

1

, 4K (50p/60p)

4:4:4 and HDR signals that meet Ultra HD

Blu-ray standards. (> 10)

≥ Network connection (> 16)

≥ Network setting (> 17)

Due to copyright restrictions, it may not be possible to play back certain discs unless this unit is connected to the Internet.

Enjoying 3D video and photos

Preparation

Connect this unit to a 3D compatible TV. (> 10)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed on the screen.

≥ 3D Settings (> 28, 31)

≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

≥ 3D video might not output the way it is set in “Video

Format” and “24p Output” (> 29).

≥ When playing back 3D photos from “Photos” screen, select from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the red button on the remote control to switch the view of playback contents.

≥ When connected to a device or terminal that does not support HDCP2.2*

1

, this unit applies Dynamic Range

Conversion*

2

to HDR signals to output them in 2K resolution. In addition, depending on the disc, it may not be possible to perform playback correctly.

≥ When connected to a device or terminal that supports 4K

(50p/60p) 4:2:0 (8 bit) and lower, this unit plays back 50p/

60p content by applying Dynamic Range Conversion* its HDR signals to output them.

≥ When connected to a device or terminal that does not

2 to support 4K resolution, this unit applies Dynamic Range

Conversion*

2

to HDR signals to output them in 2K resolution.

≥ When connected to a device or terminal that does not support HDR, this unit applies Dynamic Range

Conversion*

2

to HDR signals to output them. In addition, depending on the disc, it may not be possible to output content in 2K resolution or perform playback correctly.

≥ For details on the playback of Ultra HD Blu-ray content, refer to the website below.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

*1

*2

HDCP is a technology designed to prevent illegal copying.

“2.2” represents a version.

Dynamic Range Conversion is a function that converts

HDR video signals into video signals suited to TVs that do not support HDR input.

With “BD-Live” discs, you can enjoy bonus contents that use Internet access.

For this BD-Live function, insertion of an SD card is necessary along with Internet connection.

1

Enjoying BD-Live

Perform network connection and settings.

(> 16, 17)

2

Insert an SD card with 1 GB or more free space.

≥ The SD card is used as the local storage.

3

Insert the disc.

Deleting data/Formatting SD cards

Select “SD Card Management” in the HOME

menu (> 19), then select “BD-Video Data

Erase” or “Format SD Card”.

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for certain discs. (> 33)

TQBS0019

21

DMP-UB700_EB-TQBS0019.book 22 ページ 2016年8月26日 金曜日 午後12時2分

Slideshow

Play a slideshow of photos and adjust various settings during the playback.

1

Insert the media.

2

Select “View Photos”.

3

Select an item and press the green button.

The following items can be set.

Start

Slideshow

Interval

Transition

Effect

Repeat Play

Soundtrack

Soundtrack

Folder

Random

Soundtrack

Start the slideshow.

You can display still pictures in the selected folder one by one at a constant interval.

Change the display interval.

Select the effect when sliding pictures.

Set whether to repeat the slideshow.

Set whether to play background music.

≥ FLAC and MP3, etc., on the

USB device can be played back during the slideshow of

JPEG on the USB device or the SD card.

≥ A music CD can also be played back during the slideshow of JPEG on the

SD card.

Select the folder from which the music files are played.

Background music is played in random order.

Enjoying Network

Service

Network Service allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from Network Service home screen.

MORE

BACK

*

* Images are for illustration purposes, contents may change without notice.

Preparation

≥ Network connection (> 16)

≥ Network setting (> 17)

– You must agree to the terms of use for the Internet function and the privacy policy. (> 33, “Notice”)

1

Press [INTERNET].

≥ Netflix can be accessed directly by pressing [NETFLIX] button.

2

Select the item and press [OK].

To exit from Network Service

Press [HOME].

≥ Still pictures displayed as “ ” cannot be displayed as thumbnail with this unit.

≥ When both the music CD and the USB device with recorded music are inserted into this unit, the music CD has priority to be played back as background music.

≥ You cannot play back AAC and ALAC as background music.

22

TQBS0019

DMP-UB700_EB-TQBS0019.book 23 ページ 2016年8月26日 金曜日 午後12時2分

≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of Network Service

(> 33, “Network Service Lock”)

– When the audio is distorted

(> 33, “Audio Auto Gain Control”)

– When wrong time is displayed

(> 33, “Time Zone”, “Summer Time”)

≥ When using a slow Internet connection, the video may not be displayed correctly. A high speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware as soon as a firmware update notice is displayed on the screen. If the firmware is not updated, you may not be able to use Network Service function properly. (> 18)

≥ Network Service Home Screen is subject to change without notice.

≥ The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ Some features of websites or content of the service may not be available.

≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries and may be presented in specific languages.

Home Network feature

Before using the following features, be sure to configure the connected equipment on your

Home Network.

Using Mirroring

Mirroring is a function which displays a smartphone or tablet’s screen on a TV via this unit.

Enjoy the content shown on a

Miracast

TM

-compatible smartphone or similar device on your large TV screen.

≥ A device that supports the Mirroring function and Android

TM

ver. 4.2 or higher is required.

For information on whether the smartphone, etc. supports Mirroring, contact the manufacturer of the device.

Player

Mirroring compatible device

1

Press [MIRRORING].

2

Operate the Mirroring compatible device.

≥ On the device, enable Mirroring and select this unit (DMP-UB700) as the device to be connected.

For details, refer to the instructions supplied with the device.

To exit from Mirroring

Press [HOME].

TQBS0019

23

DMP-UB700_EB-TQBS0019.book 24 ページ 2016年8月26日 金曜日 午後12時2分

Playing back contents on the

Network Contents server

You can share photos, videos and music stored in the Network Contents server*

1

[PC, smartphone, recorders, etc.] connected to your home network.

About support format of Network Contents

(> 41)

Using the Digital Media

Controller

You can use a smartphone or tablet as the Digital

Media Controller (DMC) to playback contents from Network Contents server*

1

on the Renderer

(this unit).

Possible applications:

Server

Player

≥ When this unit is connected to a Panasonic recorder with a server function, register this unit to the recorder.

1

Press [HOME].

2

Select “Home Network” and press [OK].

3

Select “Network Contents Playback” and press [OK].

≥ The list can be updated by pressing the red button on the remote control.

≥ The connection method can be switched to

Direct Access* 2 by pressing the green button on the remote control.

4

Select the equipment and press [OK].

5

Select the item to play and press [OK].

≥ You may be able to use convenient functions depending on the content by pressing [OPTION].

To exit from Home Network

Press [HOME].

Renderer

Renderer

Server

Controller

*3

*3

Server

i

Controller

*3

Preparation

Perform the “Remote Device Settings”. (> 33)

≥ You can register up to 16 devices.

1

Press [HOME].

2

Select “Home Network” and press [OK].

3

Select “Media Renderer” and press [OK].

4

Select “Home Network” or “Direct

Access” and press [OK], then follow the indications on the screen.

5

Operate the DMC compatible devices.

To exit from Media Renderer screen

Press [HOME].

≥ Direct Access connection* 2 while using Home Network feature is only temporary, and the network connection method returns to the original setting when exiting.

≥ Depending on the device or connection environment, the data transfer rate may decrease.

≥ Depending on the contents and the connected equipment, playback may not be possible.

≥ Items displayed in grey on the display cannot be played back by this unit.

*1

*2

*3

DLNA compatible server, etc.

Direct Access is a function which allows you to wirelessly and directly connect wireless LAN-equipped devices to each other without a wireless router in between. You can connect devices such as those that support Wi-Fi Direct

DMC compatible software should be installed.

® .

24

TQBS0019

DMP-UB700_EB-TQBS0019.book 25 ページ 2016年8月26日 金曜日 午後12時2分

VIERA Link

What is VIERA Link?

VIERA Link is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or other device under “VIERA Link”.

You can use this function by connecting the equipment with an HDMI cable*. See the operating instructions for connected equipment for operational details.

* Only when connecting via an HDMI VIDEO OUT terminal on this unit.

Playing music continuously even after turning off the TV

When the unit is connected to a Panasonic TV

(VIERA) that supports VIERA Link and an amplifier/receiver supports VIERA Link.

1 While playing music

Press [OPTION].

2 Select “TV Power Off”.

Automatic input switching

Power on link

When the following operations are performed, the input channel of the TV will be automatically switched and the screen of this unit will be displayed.

If this unit is on and the TV is off, the TV automatically turns on.

– When play starts on the unit

– When you display a menu, such as the HOME menu or Setup menu

Power off link

When you set the TV to standby mode, this unit is also automatically set to standby mode.

Easy control only with VIERA remote control

Only when TV supports “VIERA Link”

By using the TV remote control, you can perform various playback operations and settings.

See the operating instructions of the TV for more details.

≥ If you set “VIERA Link” to “Off”, set to “On” (> 34).

(The default setting is “On”.)

≥ The buttons and functions that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.

≥ The operation of this unit may be interrupted when you press certain buttons on the TV remote control.

≥ VIERA Link, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC

(Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.

TQBS0019

25

DMP-UB700_EB-TQBS0019.book 26 ページ 2016年8月26日 金曜日 午後12時2分

Option menu

A variety of playback operations and settings can be performed from this menu.

Available options differ depending on the playing contents and the condition of the unit.

1

Press [OPTION].

e.g., BD-Video

Operation Menu

Soundtrack

Subtitle Settings

Angle

Repeat Play

Secondary Video

Playback Information Window

Control Panel

Top Menu

Pop-up Menu

1 ENG DTS-HD MSTR Multi

1

Off

≥ When playing music, select “Playback

Settings” and press [OK].

2

Select an item and change the settings.

To exit the screen

Press [OPTION].

Regarding Language : (> 42)

Operation Menu

Soundtrack (> 20)

This setting is also able to switch by pressing

[AUDIO].

Audio Channel

Select the audio channel number.

Subtitles

Subtitle Settings

Change the subtitle settings.

Angle

Select the number of the angle.

Repeat Play

Select the item that you want to repeat.

≥ You can repeat the playback of a chapter, playlist, the entire disc, etc., but the items displayed will differ depending on the type of the media.

≥ Select “Off” to cancel.

Random

Select whether or not to play random.

Start Slideshow

Start the slideshow.

Status

Show the status messages.

Rotate RIGHT

Rotate LEFT

Rotate the still picture.

Wallpaper

Set the still picture to the wallpaper of HOME menu.

(> 19)

Video

The recording method of original video appears.

Secondary Video

Video

Soundtrack

Select on/off for images. The recording method of original video appears.

Select on/off for audio and the language.

Playback Information Window

You can check the detailed disc playback status.

Video attribute information of disc.

Audio attribute information of disc.

HDMI(VIDEO) output information.

HDMI(AUDIO) output information.

Press [RETURN] to exit.

Control Panel

Display the Control Panel.

Playing back while using VIERA Link, etc.

e.g.,

Press [RETURN] to hide the Control Panel.

26

TQBS0019

DMP-UB700_EB-TQBS0019.book 27 ページ 2016年8月26日 金曜日 午後12時2分

Top Menu

Display Top Menu.

Pop-up Menu

Display Pop-up Menu.

Menu

Display Menu.

Reception

The radio wave status during the playback of

Network Contents is displayed. (Only when a wireless connection is used)

Picture Settings

Picture Settings

Display

Picture Type

Noise Reduction

Progressive

During BD-Video playback, these icons switch to the ones for BD Video content.

Set 1

Switch “Set 1”, “Set 2” or “Standard” by using

[2, 1].

≥ You can register desired settings to “Set 1” and

“Set 2”. Settings for BD Video playback and settings for the playback of other types of media are registered separately.

(The default settings for “Set 1”/ ”Set 2” are the same as the settings for “Standard”.)

≥ You cannot change the “Standard” settings.

Display

Select a setting suitable for your screen.

Picture Type

Select the picture quality mode during play.

Sharpness Adjustment

Adjust the sharpness of images. The greater the value is, the sharper images will be.

Noise Reduction

Reduce unnecessary noise in videos. The  greater the value is, the less noise will appear.

Luminance/Colour Adjustment

Adjust the contrast, brightness, white gamma, black gamma, colour saturation and hue.

Bandwidth Limitation

Adjust the bandwidth limitations.

Dynamic Range Conversion Adjustment

When this unit is connected to a TV that does not support HDR (High Dynamic Range) input, HDR video is output converting to a SDR (Standard

Dynamic Range) video signal. If you set a smaller value, their contrast will be reproduced more faithfully, but the entire screen will appear darker.

To increase the brightness, set a larger value.

24p / 25p Conversion

Play back videos with film-like motion.

≥ When this unit is connected to a TV compatible with 4K/24p or 4K/25p:

If “Video Format” (> 29) is set to “Automatic” or

“4K”, videos will be output in 4K/24p or 4K/25p.

≥ When this unit is connected to a TV compatible with 1080/24p:

If “Video Format” (> 29) is set to “Automatic”,

“1080i” or “1080p”, videos will be output in

1080/24p.

≥ This function may not work depending on the video.

≥ Noise may appear on the image when you switch the setting.

Progressive

Select the method of conversion for progressive output to suit the type of material being played.

≥ If the video is disrupted when “Auto” is selected, select either “Video” or “Film” depending on the material to be played back.

Reset to Default Picture Settings

Return “Picture Settings” of the selected tab

(“Set 1” or “Set 2”) to the factory preset.

TQBS0019

27

DMP-UB700_EB-TQBS0019.book 28 ページ 2016年8月26日 金曜日 午後12時2分

Sound Effect Settings

Sound Effects

*1, *2

Select the sound effect.

≥ Night Surround :

Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily.

≥ Re-master :

This feature gives you brighter sound by increasing the high frequency portion of the audio.

(Upsampling up to 192 kHz/32 bit is possible.)

Recommended setting

Re-master 1

Re-master 2

Re-master 3

Pop and rock

Jazz

Classical

≥ Digital Tube Sound :

This feature gives you a warm sound, like that produced by a vacuum tube amplifier.

(Upsampling up to 192 kHz/32 bit is possible.)

Recommended setting

Digital Tube

Sound 1

Digital Tube

Sound 2

Digital Tube

Sound 3

Digital Tube

Sound 4

Digital Tube

Sound 5

Digital Tube

Sound 6

A crisp, delicate sound

A tight, hi-fi sound

A soft, rich sound

A clear, powerful sound

A distinctive mid-range sound

A soft, enveloping sound

Sound Effect Frequency

Set the maximum sampling frequency for the audio selected in “Sound Effects”.

≥ Even when “96/88.2kHz” is selected, an audio source with a sampling frequency of 96 kHz or higher will be output with the original sampling frequency.

≥ When “Sound Effects” is set to “Off”, this setting is disabled.

DSD Decode Sampling Frequency

Select the settings that suit your sound quality preferences.

DSD LPF Setting

Select the settings that suit your sound quality preferences.

*1

*2

Not every function can be set individually.

This function is effective for audio from HDMI OUT or

DIGITAL AUDIO OUT only when “Digital Audio Output” is set to “PCM” (> 30).

Sound Settings

Dialogue Enhancer*

The volume of the centre channel is raised to make dialog easier to hear.

High Clarity Sound

Stop processing signals that affect the audio quality or turn off the unit’s display to make the audio quality clearer. (> 31)

Select whether or not to output images.

This setting is able to switch by pressing green button on the remote control during music playback.

≥ If “On (Video Off)” is selected, the setting will be cancelled after you play back a video.

* This function is effective for audio from HDMI OUT or

DIGITAL AUDIO OUT only when “Digital Audio Output” is set to “PCM” (> 30).

3D Settings

Signal Format

Original

Side by side

Keep original picture format.

3D picture format comprising of left and right screens.

Graphic Display Level

3D position for the Option menu or message screen, etc. can be adjusted during 3D playback.

28

TQBS0019

DMP-UB700_EB-TQBS0019.book 29 ページ 2016年8月26日 金曜日 午後12時2分

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

1

Press [HOME].

2

3

Select “Setup”.

Select “Player Settings”.

Player Settings

HDMI

Picture

Sound

3D

Language

Network

Ratings

Video Format

4K(50p/60p) Output

24p Output

HDMI(VIDEO) Output Mode

HDMI(AUDIO) Output Mode

Advanced Settings

Automatic

Off

Automatic

Automatic

Audio Only

System

OK

RETURN

4

Select an item and change the settings.

To exit the screen

Press [HOME].

HDMI

Video Format

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

≥ If “Automatic” is selected, the best suited output resolution to the connected TV is automatically selected.

4K(50p/60p) Output

This unit automatically chooses to output images in 4K* 1 (50p/60p) when connected to a 4K (50p or

60p) compatible TV.

≥ This item is available only when “Video Format” is set to “Automatic” and “4K”.

≥ This item is not available when “HDMI(AUDIO)

Output Mode” is set to “Video+Audio”.

≥ To connect to a TV that supports 4K (50p/60p)

4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select

“4K(50p/60p) 4:4:4”.

Images will not be output correctly with an

HDMI cable that does not support 18 Gbps.

≥ To connect to a TV that supports 4K (50p/60p)

4:2:0/8 bit, select “4K(50p/60p) 4:2:0”.

24p Output

Content recorded at 24p*

2

, such as BD-Video films, is output at 24p when played back.

≥ When this unit is connected to TV compatible with 4K/24p and “Video Format” is set to

“Automatic” or “4K”, images will be output in 4K/

24p.

≥ When this unit is connected to a TV compatible with 1080/24p and “Video Format” is set to

“Automatic”, “1080i” or “1080p”, images will be output in 1080/24p.

≥ If images output in 24p are distorted, change the setting to “Off”.

HDMI(VIDEO) Output Mode

Set whether or not to output audio from the HDMI

VIDEO OUT terminal.

≥ When an amplifier is connected to the HDMI

AUDIO OUT terminal and this menu item is set to “Automatic ( Video Only / Video+Audio )”, the

TV may not output audio. In that case, select

“Video+Audio”.

HDMI(AUDIO) Output Mode

Set whether or not to output images from the

HDMI AUDIO OUT terminal.

≥ It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when

“Video+Audio” is selected.

TQBS0019

29

DMP-UB700_EB-TQBS0019.book 30 ページ 2016年8月26日 金曜日 午後12時2分

Advanced Settings

Press [OK] to show the following settings:

¾

Colour Mode

This setting is for selecting colour-space conversion of the image signal.

¾

Deep Colour Output

This setting is for selecting whether to use Deep

Colour Output when a TV that supports Deep

Colour is connected.

¾

High Dynamic Range Output

Output images in HDR (High Dynamic Range) format depending on the content and connected device.

¾

Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a

TV that supports this function is connected.

¾

Audio Output

This setting selects whether or not to output audio from HDMI.

≥ To enjoy audio with the HDMI terminal, select

“On”. To enjoy audio with the OPTICAL terminal, select “Off”. Audio will not be output from the HDMI terminal regardless of the settings for HDMI(VIDEO) Output Mode and

HDMI(AUDIO) Output Mode.

¾

7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically expanded and played back at

7.1ch.

≥ If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

≥ Audio reformatting is enabled in the following cases:

– When you have selected “PCM” in “Digital

Audio Output”.

– When the audio is Dolby Digital, Dolby

Digital Plus, Dolby TrueHD or LPCM.

– BD-Video playback

*1

*2

A high resolution image/display technology of approximately 4000 (width) k 2000 (height) pixels.

A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

Picture

Still Mode

Select the type of picture shown when you pause playback.

Automatic

Field

Frame

Automatically selects the type of picture shown.

Select if jittering occurs when

“Automatic” is selected.

Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.

Seamless Play

The chapter segments in playlists are played seamlessly.

≥ Select “On” when the picture freezes for a moment at the chapters segment in playlists.

Sound

Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Automatic” is effective only when playing Dolby

TrueHD.

Digital Audio Output

Press [OK] to show the following settings:

¾

Dolby D/Dolby D +/Dolby TrueHD

¾

DTS/DTS-HD

¾

MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥ If you do not make proper settings the audio may be static or noisy.

30

TQBS0019

DMP-UB700_EB-TQBS0019.book 31 ページ 2016年8月26日 金曜日 午後12時2分

¾

BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound).

If “Off” is selected, the unit outputs the primary audio only.

To enjoy BD-Video that supports Dolby Atmos

®

or

DTS:X TM

Connect this unit to an AV amplifier or similar device that supports it with an HDMI cable, and select the following settings:

– Dolby D/Dolby D +/Dolby TrueHD: “Bitstream”

– DTS/DTS-HD: “Bitstream”

– BD-Video Secondary Audio: “Off”

Dolby Atmos is a trademark of Dolby Laboratories.

OPTICAL Down Sampling

Select whether or not to convert the sampling frequency of the audio to be output from the

OPTICAL terminal.

If you choose to convert the sampling frequency, you can limit the maximum output to 48 kHz or

96 kHz.

≥ Set a frequency supported by the connected device.

≥ When playing back BD-Video, signals are converted to 48 kHz despite the settings in the following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the connected equipment supports the virtual surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the following cases:

– AVCHD playback

– Playback of secondary audio (including the button click sound).

HDMI Output Settings of Music Playback

Minimise the audio noise during music playback by automatically switching the video output to

1080i.

Settings for High Clarity Sound

Set a terminal that will stop processing audio signals or whether or not to turn on/off the unit’s display when “High Clarity Sound” (> 28) is set to

“On (Video Off)” or “On (Video On)”.

≥ Set an option for video playback and audio playback.

Audio Delay

Synchronization between picture and sound is corrected by adjusting the delay time of the audio output.

3D

3D BD-Video Playback

Select the playback method of 3D compatible video software.

3D AVCHD Output

Select the output method of 3D AVCHD videos.

3D Playback Message

Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

TQBS0019

31

DMP-UB700_EB-TQBS0019.book 32 ページ 2016年8月26日 金曜日 午後12時2分

Language

Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc will be selected.

≥ When the selected language is not recorded on the disc, or depending on how the navigation is created on the disc, it may playback in a different language than the selected language.

≥ Enter a code (> 42) when you select “Other

¢¢¢¢”.

Subtitle Preference

Choose the language for the subtitle.

≥ When “Automatic” is selected, a subtitle for the language selected in the “Soundtrack

Preference” is displayed only when the language other than the language selected in the “Soundtrack Preference” is played back.

≥ When the selected language is not recorded on the disc, or depending on how the navigation is created on the disc, it may playback in a different language than the selected language.

≥ Enter a code (> 42) when you select “Other

¢¢¢¢”.

Menu Preference

Choose the language for the disc menus.

≥ Enter a code (> 42) when you select “Other

¢¢¢¢”.

Subtitle Text

Select a desired item according to the language used for MKV subtitles text.

≥ This item is displayed only after playing back a file.

On-Screen Language

Choose the language for menus and on-screen messages.

Network

Easy Network Setting (> 17)

Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

¾

LAN Connection Mode

Select the LAN connection method.

≥ When not using wireless LAN (when turning it off), select “Wired”.

¾

Wireless Settings

This allows the wireless router and connection settings to be set up. Current connection settings and connection state can be checked.

The wireless router connection wizard will be displayed.

Select a connection method to wireless access point.

Search for wireless network (> 18)

PUSH button (> 17)

PIN code

This method allows you to set encryption for a wireless LAN connection with ease.

You can connect to a wireless LAN network by entering a PIN code generated by this unit into the wireless access point you want to connect to.

Manual setting

If a search using “Search for wireless network” does not find the wireless access point you want to connect to, or if you cannot connect to a wireless LAN network with other methods, enter an SSID manually to establish a wireless LAN connection.

¾

IP Address / DNS Settings

This is for checking the state of the network connection and setting the IP address and

DNS-related.

Press [OK] to show the respective setting.

¾

Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

32

TQBS0019

DMP-UB700_EB-TQBS0019.book 33 ページ 2016年8月26日 金曜日 午後12時2分

¾

Network Service Settings (> 22)

Press [OK] to show the following settings:

Second Screen Browsing

When this function is set to “On”, you can enjoy the content you are viewing on a network service application of smartphone, etc. with the home network on the big screen of your TV.

Audio Auto Gain Control

Volume that is different depending on the contents is adjusted automatically to the standard volume while using the Network

Service.

≥ Depending on contents, this function effect will not work.

≥ Select “Off” when the audio is distorted.

Time Zone

Set the unit’s time to match your location.

≥ Some Network Service contents require the time zone to be set. Set time zone if necessary.

Summer Time

Select “On” when using summer time.

Notice

Displays the terms of service for the cloud services.

¾

Network Drive Connection

This unit can access a hard disk shared folder on a network and play back videos, still pictures, and music.

¾

Remote Device Settings (> 24)

Press [OK] to show the following settings:

Remote Device Operation

Enable to operate the unit by DMC.

Device Name Entry

Set the name of this unit to be displayed on the connected equipment.

Registration Type

Automatic

Manual

Allow connections to all the equipment accessing this unit.

Set the permission for individual equipment connections accessing this unit.

Remote Device List

Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

¾

BD-Live Internet Access (> 21)

You can restrict Internet access when BD-Live functions are used.

≥ If “Limit” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

Ratings

The following items use the same password.

Don’t forget your password.

DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

BD-Video Ratings

Set an age limit of BD-Video (including Ultra HD

Blu-ray) play.

Network Service Lock

You can restrict the usage of Network Service.

TQBS0019

33

DMP-UB700_EB-TQBS0019.book 34 ページ 2016年8月26日 金曜日 午後12時2分

System

Easy Settings

You can execute basic settings.

TV Settings

Press [OK] to show the following settings:

¾

TV System

Perform the setup so it matches the TV System of the connected TV.

¾

Screen Saver Function

This is to prevent image retention on the screen.

≥ When this is set to “On”:

If a list of playback content is displayed and there is no operation for 5 minutes or more, the screen switches to HOME menu automatically.

≥ While playing and pausing, etc., this function is not available.

¾

On-Screen Messages

Choose whether to show status messages automatically.

¾

VIERA Link

Set to use “VIERA Link” function when connected via HDMI cable to a device that supports “VIERA Link”.

≥ Select “Off” when you do not want to use

“VIERA Link”.

Front Panel Display

Changes the brightness of the unit’s display.

≥ If “Automatic” is selected, the display is set to bright and only dimmed during playback.

≥ This setting does not work when “Front Panel

Display” in “Settings for High Clarity Sound” is set to “Off”. (> 31)

(Except for when “High Clarity Sound” is set to

“Off”)

Quick Start

Speed of start-up from standby mode is increased.

≥ When set to “On”, the internal control unit will be powered. The idle power consumption will increase so compared to when set to “Off”.

Remote Control

Change the remote control code if other

Panasonic products react to this remote control.

Firmware Update (> 18)

Press [OK] to show the following settings:

¾

Automatic Update Check

When this equipment remains connected to the

Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

¾

Update Now

You can update the firmware manually if a firmware update is available.

System Information

Press [OK] to show the following settings:

¾

Software Licence

Information about the software used by this unit is displayed.

¾

Firmware Version Information

Display firmware version of this unit and wireless LAN module.

Default Settings

This returns all values in the Setup menu and the

Option menu to the default settings, except for some settings of network, ratings, remote control code, on-screen language, etc.

34

TQBS0019

DMP-UB700_EB-TQBS0019.book 35 ページ 2016年8月26日 金曜日 午後12時2分

Troubleshooting guide

Before requesting service, please perform the following checks.

If the problem remains unresolved, consult your dealer for instructions.

Do you have the latest firmware installed?

Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. (> 18)

The following do not indicate a problem with this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

– Image disturbance when replacing 3D discs.

Unit does not respond to remote control or unit’s buttons.

Touch and hold [Í/I] on the main unit for

3 seconds.

– If still unable to turn the unit off, disconnect the

AC mains lead, wait 1 minute, then reconnect the AC mains lead.

The buttons of the unit do not work.

Touch the buttons with your finger. They may not work if operated with your fingernails or hands wearing gloves.

The buttons of the unit are sensitive.

The buttons of the unit respond to light touch. Do not place objects on or around them.

Cannot eject disc.

1 While the unit is off

Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Press [

1] (right) repeatedly on the remote control until “06 FTO” is displayed on the unit’s display.

3 Press [OK].

General operation

To return to the factory default.

¾ Select “Yes” in “Default Settings” in the Setup menu. (> 34)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 While the unit is off

Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Press [

1] (right) repeatedly on the remote control until “08 FIN” is displayed on the unit’s display.

3 Press and hold [OK] for more than 5 seconds.

This unit is turned off when the input for the

TV is switched.

¾ This is a normal phenomenon when using

VIERA Link. For details please read the operating instructions for the TV.

The remote control doesn’t work properly.

¾ Change the batteries in the remote control.

(> 5)

¾ The remote control and this unit are using different codes.

If “SET CODE ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control.

Press and hold [OK] and the displayed number (“”) for more than 5 seconds.

This unit is turned off automatically.

¾ To save on electricity, this unit is turned off automatically depending on the media if there is no button operation for about 20 minutes when not playing back (such as when paused or displaying the menu, displaying still pictures, etc.).

TQBS0019

35

DMP-UB700_EB-TQBS0019.book 36 ページ 2016年8月26日 金曜日 午後12時2分

You have forgotten your ratings password.

You want to cancel the ratings level.

¾

The ratings level returns to the factory defaults.

1 While the unit is on

Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Press [

1] (right) repeatedly on the remote control until “03 VL” is displayed on the unit’s display.

3 Press [OK].

The TV screen turns black.

¾ In the following cases, HDMI authentication takes place and a black screen is displayed:

– When “24p / 25p Conversion” is set to

“Auto”.

– When “24p Output” is set to “Automatic”.

– When the display is switched between 2D and 3D images.

– When you quit the 4K playback by displaying another screen, including the

HOME menu.

– When “HDMI Output Settings of Music

Playback” is set to “Sound Quality Priority”.

This unit does not recognize the USB connection correctly.

¾

Disconnect and re-connect the USB cable. If it still does not recognize the connection, turn this unit off and on again.

¾

USB devices may not be recognized by this unit when connected using the following :

– a USB hub

– a USB extension cable

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

¾ If the USB HDD is not recognized, the power to the USB HDD may not be supplied. Supply power from an external source.

Picture

Images from this unit do not appear on the TV screen, or they are distorted.

¾ An incorrect resolution is selected in “Video

Format”. Reset the setting as follows:

1 While the unit is on

Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Press [

1] (right) repeatedly on the remote control until “04 PRG” is displayed on the unit’s display.

3 Press and hold [OK] for more than 5 seconds.

Set the item again. (> 29)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD

®

audio are not output properly, select “Yes” in “Default Settings” (> 34) and make proper settings.

¾ The connected devices are changed. Reset the setting as follows:

1 While the unit is on

Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Press [

1] (right) repeatedly on the remote control until “13 L4K” is displayed on the unit’s display.

3 Press and hold [OK] for more than 5 seconds.

– “4K(50p/60p) Output” will be set to “Off”.

Make the correct setting again. (> 29)

¾

PAL discs cannot be correctly viewed on an

NTSC TV.

¾

When “3D BD-Video Playback” in the Setup menu is set to “Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 31)

¾

When outputting in 4K, images may be distorted depending on the HDMI cable. Use an HDMI cable that supports 18 Gbps.

36

TQBS0019

DMP-UB700_EB-TQBS0019.book 37 ページ 2016年8月26日 金曜日 午後12時2分

Video is not output.

¾ Video is not output when the “High Clarity

Sound” is set to “On (Video Off)”. (> 28)

¾ Video from the HDMI AUDIO OUT terminal is not output when the “HDMI(AUDIO) Output

Mode” is set to “Audio Only”. (> 29)

Video is not output in 4K or high-definition.

¾ Confirm that “Video Format” in the Setup menu is set properly. (> 29)

¾ Confirm the HDMI cable, related connections and the compatibility of TV video input.

To output images in 4K, connect the HDMI cable to a 4K compatible terminal of the connected device. (> 10)

¾ Set “HDMI(AUDIO) Output Mode” to “Audio

Only”. (> 29)

¾ To enjoy image in 4K (50p/60p), set “4K(50p/

60p) Output” to “4K(50p/60p) 4:4:4” or

“4K(50p/60p) 4:2:0”. (> 29)

¾ If “4K(50p/60p) Output” is set to “4K(50p/60p)

4:4:4”, check to see if the connected HDMI cable supports 18 Gbps. (> 10, 29)

¾ If 4K images are not output from the connected 4K-compatible TV, set “4K(50p/

60p) Output” to “4K(50p/60p) 4:4:4” or

“4K(50p/60p) 4:2:0”. (> 29)

3D video is not output.

¾

Connect to a 3D compatible device (e.g., TV and amplifier/receiver).

¾ When a non-3D compatible amplifier/receiver is connected between this unit and a TV, 3D video is not output. (> 12)

¾ If there is a non-3D compatible amplifier/ receiver connected to the HDMI AUDIO OUT terminal, set the “HDMI(AUDIO) Output

Mode” to “Audio Only”. (> 29)

¾ Confirm the settings on this unit and the TV for 3D. (> 21)

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 31, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Adjust the aspect setting on the TV.

There is a lot of image lag when playing video.

¾

Set “0” all items in the “Noise Reduction”.

(> 27)

¾ Set “Audio Delay”. (> 31)

Audio

Cannot hear the desired audio.

¾ Check the connections and the “Digital Audio

Output” settings. (> 11, 30)

¾ To output audio from a device connected with an HDMI cable, set “Audio Output” to “On” in the Setup menu. (> 30)

¾ When connecting this unit to a TV via an

HDMI VIDEO OUT and to an amplifier/ receiver via an HDMI AUDIO OUT, set

“HDMI(VIDEO) Output Mode” to “Automatic

( Video Only / Video+Audio )”. (> 11, 29)

TQBS0019

37

DMP-UB700_EB-TQBS0019.book 38 ページ 2016年8月26日 金曜日 午後12時2分

There is no sound coming out.

¾ To output audio using OPTICAL terminal, set

“OPTICAL Down Sampling” properly. (> 31)

¾ Refer to “Connecting to an amplifier/receiver”

(> 11 - 15) to check the audio output settings suited to the connections of your device.

In the following cases, audio is not output from the terminals listed below:

HDMI VIDEO OUT terminal

– When a device is connected to the HDMI

AUDIO OUT terminal and “HDMI(VIDEO)

Output Mode” is set to “Automatic ( Video

Only / Video+Audio )” (> 29)

– When “Audio Output” in “Advanced

Settings” is set to “Off” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “OPTICAL Only” (> 31)

HDMI AUDIO OUT terminal

– When “Audio Output” in “Advanced

Settings” is set to “Off” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “OPTICAL Only” (> 31)

OPTICAL terminal

– When a device is connected to the HDMI

AUDIO OUT terminal and “Audio Output” in

“Advanced Settings” is set to “On” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “HDMI Only” (> 31)

Playback

Disc cannot be played.

¾ The disc is dirty. (> 5)

¾ The disc is not finalized. (> 7)

¾

Depending on the Ultra HD Blu-ray disc, it may not be possible to perform playback unless this unit is connected to the Internet.

Still pictures (JPEG) do not play back normally.

¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

I can’t play back BD-Live.

¾ The SD card is write-protected. (> 7)

¾ Confirm that this unit is connected to the broadband Internet. (> 16)

¾

Confirm the “BD-Live Internet Access” settings. (> 33)

¾

Confirm an SD card is inserted into the SD card slot. (> 9)

Network

I can’t connect to the network.

¾ Confirm the network connection and settings.

(> 16, 17, 32)

¾ There may be interference that prevents the unit from detecting your home network. Place the unit and the wireless router closer to each other. This unit may be able to detect your network name (> 18, “SSID”).

¾ Check the operating instructions for each device and connect accordingly.

38

TQBS0019

DMP-UB700_EB-TQBS0019.book 39 ページ 2016年8月26日 金曜日 午後12時2分

When using wireless LAN connection, video from the Network Contents server* is not played back or video frames are dropped during playback.

¾

Higher transfer rate router such as 802.11n

(2.4 GHz or 5 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz or

5 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 32), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network

Setting” (> 17) again.

* DLNA compatible server, etc.

Messages on the screen

Cannot read. Please check the disc.

¾ You inserted an incompatible disc.

Cannot play this title.

¾ You tried to play a non-compatible video.

No disc inserted.

¾

The disc may be upside down.

$ This operation cannot be performed now.

¾ Some operations are unsupported by the unit.

(For example, reverse slow motion, etc.)

IP address is not set.

¾ The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾ Set a stronger network security level referring to the wireless router operating instructions.

Messages on the unit’s display

F99

¾ The unit fails to operate properly. Touch [Í/I] on the main unit for 3 seconds to switch the unit to standby, then switch back on.

NET

¾ While connecting to a network.

NO PLAY

¾ There is a viewing restriction on a BD-Video or DVD-Video. (> 33)

¾ A DVD-Video disc with an incompatible region code is inserted.

NO READ

¾ The media is dirty or badly scratched. The unit cannot play.

REMOVE

¾

The USB device is drawing too much power.

Remove the USB device.

SET CODE

(“” stands for a number.)

¾ The remote control and this unit are using different codes. Change the code on the remote control.

Press and hold

[OK] and the indicated number button at the same time for more than

5 seconds.

U59

¾ Temperature of this unit is hot and the unit switches to standby for safety reasons.

Wait for about 30 minutes.

Install or place this unit with good ventilation.

START

¾ A firmware update will start. Please do not turn off the unit.

UPDATE /5

(“” stands for a number.)

¾ A firmware update is in progress.

Please do not turn off the unit.

FINISH

¾ The firmware update is complete.

TQBS0019

39

DMP-UB700_EB-TQBS0019.book 40 ページ 2016年8月26日 金曜日 午後12時2分

Specifications

General

Signal system

Operating temperature range

Operating humidity range

DIGITAL AUDIO OUT

(OPTICAL)

HDMI OUT

(19 pin type A)

USB port (Type A)

SD card slot

LAN (Ethernet) Port

Wireless LAN

LASER Specification

Power supply

Power consumption

Power consumption in standby mode

Dimensions (WkHkD)

Including the projecting parts

Mass

PAL/NTSC i5 oC to i35 oC

10 % to 80 % RH (no condensation)

1 pc.

Output format : PCM, Dolby

Digital, DTS ®

2 pcs.

Output Audio format : PCM,

Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS

®

, DTS-HD

High Resolution Audio

TM

,

DTS-HD Master Audio

TM

1 pc.

1 pc.

1 pc.

10BASE-T/100BASE-TX/

1000BASE-T

Standard Compliance:

IEEE802.11 a/b/g/n

Frequency Range:

2.4 GHz/5 GHz band

Security:

Encryption type: TKIP/AES,

Authentication type: PSK,

WEP (64 bit/128 bit)

Class 1 LASER Product

Wave length: 777-800 nm (CDs)/

650-665 nm (DVDs)/

400-410 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety protection

AC 220 V to 240 V, 50 Hz

Approx. 24 W

Approx. 0.2 W

(Quick Start: Off)

430 mmk61 mmk202 mm

Approx. 2.3 kg

≥ Specifications are subject to change without notice.

File format

File format Extension Reference

MKV

“.MKV”, “.mkv”

Subtitles text file

“.SRT”, “.srt”,

“.SSA”, “.ssa”,

“.ASS”, “.ass”

≥ The video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.

≥ Some MKV files may not be played back correctly, depending on the video resolution, frame rate condition, subtitle format and so on.

≥ MOTION JPEG is not supported.

mp4

(Compression methods

Video: H.264

Audio: AAC)

MPEG

(TS/PS)

“.MP4”, “.mp4”,

“.MOV”, “.mov”

“.MPG”, “.mpg”,

“.MPEG”, “.mpeg”,

“.M2TS”, “.m2ts”,

“.MTS”, “.mts”,

“.TS”, “.ts”

≥ Resolution up to

3840×2160 25p/30p,

4096×2160 24p. (MP4 only)

≥ Some mp4/MPEG files may not be played back correctly, depending on the video resolution, frame rate condition and so on.

≥ MOTION JPEG is not supported.

≥ Depending on the audio compression method, only images may be played back and it may not be possible to output audio.

JPEG

MPO

“.JPG”, “.jpg”

“.MPO”, “.mpo”

≥ MOTION JPEG and

Progressive JPEG are not supported.

≥ You may not be able to play back the file if you have edited the folder structure or the file name on a PC or other device.

3D still picture

MP3

FLAC

WAV

AAC

“.MP3”, “.mp3”

“.FLAC”, “.flac”

“.WAV”, “.wav”

“.M4A”, “.m4a”

This unit supports ID3 tags, but only titles, artist names and album names can be displayed.

This unit supports tags, but only titles, artist names and album names can be displayed.

Maximum sampling rate:

192 kHz/24 bit

Maximum sampling rate:

192 kHz/32 bit

Maximum sampling rate:

48 kHz/320 kbps

40

TQBS0019

DMP-UB700_EB-TQBS0019.book 41 ページ 2016年8月26日 金曜日 午後12時2分

File format

WMA

DSD

(DFF, DSF)

ALAC

Extension

“.WMA”, “.wma”

“.DSF”, “.dsf”,

“.DFF”, “.dff”

“.M4A”, “.m4a”

Reference

This unit supports tags, but only titles, artist names and album names can be displayed.

Maximum sampling rate:

48 kHz/385 kbps

2.8 MHz (2 ch/5.1 ch),

5.6 MHz (2 ch only)

96 kHz/32 bit (Max.7.1 ch),

176.4/192 kHz/32 bit

(Max.5.1 ch)

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

≥ A combined total of up to 10,000 files and folders can be displayed as playable data in each folder regardless of their format.

(Even when the picture playback menu is displayed, for example, if a folder in the menu contains playable videos and music files, they are also counted as playable data.)

Audio information

The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 30, “Digital Audio

Output”)

≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format.

HDMI OUT/

DIGITAL AUDIO OUT (OPTICAL)

Output channel

Terminal

DIGITAL

AUDIO OUT

(OPTICAL)

“Digital Audio Output”

“Bitstream” “PCM”

BD-Video :

7.1ch PCM *1*2

DVD-Video :

5.1ch PCM

Dolby Digital/

DTS Digital

Surround TM

Down-mixed

2ch PCM

*1

*2

When “BD-Video Secondary Audio” is set to “On”, the audio will be output as Dolby Digital, DTS Digital

Surround

TM

or 5.1ch PCM. However, when playing

BD-Video without secondary audio or navigation sounds, the audio is output as the original format.

The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.

Supported format for

Network Contents Playback

When this unit works as a Network Contents client, following contents are playable.

≥ File formats that are not supported by your

Network Contents server* cannot be played.

* DLNA compatible server, etc.

Video

Container Video codec Audio codec

Example of file extension

MKV

AVCHD

MP4

PS

TS

H.264

H.264

MPEG2

MPEG2

H.264

AAC

PCM

Vorbis

FLAC

Dolby Digital

AAC

Dolby Digital

Linear PCM

AAC

Dolby Digital

.mkv

.mts

.mp4, .mov

.mpg, .mpeg

.m2ts, .ts

Photo

Format

JPEG

Example of file extension

.jpg

Audio

Audio codec

MP3

FLAC

WAV

AAC

WMA

ALAC

DSD

Linear PCM

Example of file extension

.mp3

.flac

.wav

.m4a, .adts

.wma

.m4a

.dsf, .dff

≥ Depending on the server, the contents other than stated above can be played back.

TQBS0019

41

DMP-UB700_EB-TQBS0019.book 42 ページ 2016年8月26日 金曜日 午後12時2分

Language code list

Language Code Language Code Language Code

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Amharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6589

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali; Bangla:

6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish: 7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto: 8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance:

8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

Display languages list

Display Language Display Language Display Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

Licenses

“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/

Progressive” are trademarks of Panasonic Corporation and Sony

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Dolby, Dolby Audio, and the double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &

DTS and the Symbol together are registered trademarks, and

DTS-HD Master Audio | Essential is a trademark of DTS, Inc.

© DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing, LLC in the United States and other countries.

<AVC>

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the

AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC

Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com

<VC-1>

This product is licensed under the VC-1 Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the VC-1 Standard ("VC-1

Video") and/or (ii) decode VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide

VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA,

L.L.C.

See http://www.mpegla.com

MPEG Layer-3 audio coding technology licensed from Fraunhofer

IIS and Thomson.

SDXC Logo is a trademark of SD-3C, LLC.

“DVD Logo” is a trademark of DVD Format/Logo Licensing

Corporation.

“Wi-Fi

®

” and “Wi-Fi Direct

®

” are registered trademarks of Wi-Fi

Alliance

®

.

“Wi-Fi Protected Setup TM ”, “Miracast TM trademarks of Wi-Fi Alliance ® .

”, and “WPA TM ” are

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Android is a trademark of Google Inc.

42

TQBS0019

DMP-UB700_EB-TQBS0019.book 43 ページ 2016年8月26日 金曜日 午後12時2分

Copyright 2004-2014 Verance Corporation. Cinavia

TM

is a Verance

Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance

Corporation. All rights reserved.

This product incorporates the following software:

(1) the software developed independently by or for Panasonic

Corporation,

(2) the software owned by third party and licensed to Panasonic

Corporation,

(3) the software licensed under the GNU General Public License,

Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE.

Please refer to the detailed terms and conditions thereof shown in the Player Settings menu.

At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof.

Contact Information: [email protected]

The source code and the copyright notice are also available for free in our website below.

http://panasonic.net/avc/oss/

(1) MS/WMA

This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties.

(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or

WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume

PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

(4) Vorbis, FLAC, WPA Supplicant

The software licenses are displayed when “Software Licence” in the Setup menu is selected. (> 34)

TQBS0019

43

DMP-UB700_EB-TQBS0019.book 44 ページ 2016年8月26日 金曜日 午後12時2分

Sales and Support Information

Customer Communications Centre

≥ For customers within the UK: 0344 844 3899

≥ For customers within Ireland: 01 289 8333

≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ For further support on your product, please visit our website: www.panasonic.co.uk

Direct Sales at Panasonic UK

≥ Order accessory and consumable items for your product with ease and confidence by phoning our

Customer Communications Centre Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays).

≥ Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

≥ Most major credit and debit cards accepted.

≥ All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

≥ It couldn’t be simpler!

≥ Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.

(Back of product)

Either of these labels is affixed to this unit.

(Inside of product)

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: http://www.panasonic.com

C Panasonic Corporation 2016

EU p

TQBS0019

F0816HA0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals