SMC Networks Barricade SMC7004ABR Quick Installation Manual

Add to my manuals
41 Pages

advertisement

SMC Networks Barricade SMC7004ABR Quick Installation Manual | Manualzz

Barricade™

Broadband Router

10/100 Mbps Broadband Router

Instant Internet Sharing

Firewall Security

Simultaneous Web access for up to 253 PCs

Built-in 10/100 Mbps switch

Integrated print server

Works with PCs or Macs

Quick Installation Guide

SMC7004ABR

SMC7008ABR

Table of Contents

Congratulations on your purchase of the SMC Barricade™ Broadband Router.................. 1

Hardware Setup ............................................................................................................................ 2

Configuring Your Computer........................................................................................................... 3

Configuring Your Computer with Windows 95/98/ME ............................................................. 3

Configuring Your Computer with Windows 2000 ..................................................................... 8

Configuring Your Computer with Windows NT 4.0................................................................ 13

Configuring Your Macintosh Computer................................................................................... 17

Configuring Your Barricade...................................................................................................... 21

Configuring Your Barricade for a Dynamic IP Address .......................................................... 24

Configuring Your Barricade for a Static IP Address................................................................ 26

Configuring Your Barricade for PPPoE ................................................................................... 28

Configuring Your Barricade for Dialup on Demand ................................................................ 30

Configuring Your Computer for the Barricade Print Server ................................................ 31

Configuring Your Computer for the Barricade Print Server for Windows 95/98/NT/ME/2000

.................................................................................................................................................. 31

Configuring Your Computer for the Barricade Print Server ................................................ 33

Configuring Your Computer for the Barricade Print Server for Windows 95/98/NT/ME/2000

.................................................................................................................................................. 33

Configure the Network Printer in Unix Systems ...................................................................... 35

Congratulations

on your purchase of the SMC Barricade™ Broadband Router.

The SMC Barricade is a Broadband Router designed to share Internet Access, provide security, and to network multiple devices for a variety of users. The Barricade’s simple installation setup can be used by the least experienced of users, while providing networking professionals with easy to configure advanced features. Please read the User Guide for advanced features of this product.

Thank you for purchasing an SMC product. We know you will enjoy the many features of the

SMC Barricade.

This Package Contains

• One SMC Barricade

• One Power Adapter

• This Quick Installation Guide

• One Installation CD

• One Category 5 Fast Ethernet Cable

Confirm That You Meet Installation Requirements

Before proceeding with the installation of your Barricade, please be sure you have the following:

• A computer with an Ethernet network card installed.

• Your Windows CD, if your computer is running Windows 95, 98, or ME

• An Internet connection through a cable or DSL modem or an external dial-up or ISDN modem.

• An additional Ethernet network cable.

• A Web browser such as Internet Explorer or Netscape.

Page 1

Hardware Setup

SMC7004ABR – Front Panel

SMC7008ABR – Front Panel

1. Connecting Computers: Connect computers directly to the Barricade on ports 1-4/8 on the front panel. If you have more than 4/8 computers to plug in, connect a hub or a switch (using its uplink port) and connect additional computers to that device.

2. Connecting a Cable Modem or DSL Modem: Connect your Cable or DSL modem to the

WAN port on the rear panel.

3. Connecting a Dial-up Modem: If you use an external dial-up modem or ISDN modem, connect it to the COM port on the rear panel.

4. Connecting a Printer: If you have a printer that you want to share between computers, connect it to the Printer port using a standard parallel printer cable.

5. Power: Plug the power cord into the power jack.

SMC7004ABR – Rear Panel

SMC7008ABR – Rear Panel

Page 2

Indicator LEDs

The front panel of the Barricade provides indicator LEDs (Light Emitting Diodes) for easy monitoring. The following table defines the function of each LED.

LED

Power

(green)

WAN

(green)

Link/Act

(green)

10/100

(amber)

FDX/COL

(SMC7008ABR)

Condition Status

Barricade is receiving power.

On

On

Flashing

On

Flashing

On

Off

On

Flashing

The WAN port has established a valid network connection.

The WAN port is transmitting or receiving data.

The indicated LAN port has established a valid network connection.

The indicated LAN port is transmitting or receiving data.

The indicated LAN port is operating at 100Mbps.

The indicated LAN port is operating at 10Mbps.

The indicated LAN port is operating in full-duplex mode.

A collision occured on the indicated LAN port.

Configuring Your Computer

This Quick Installation Guide provides configuration instructions for Windows 95, 98, ME, NT

4.0, and 2000 and for Macintosh OS 7.x. Please be sure that you are following the proper instruction set for your operating system.

Configuring Your Computer with Windows 95/98/ME

begins on this page.

Configuring Your Computer with Windows 2000

begins on page 8.

Configuring Your Computer with Windows NT 4.0

begins on page 12.

Configuring Your Macintosh Computer

begins on page 17.

Configuring Your Computer with Windows 95/98/ME

You may find that the instructions here do not exactly match your version of Windows. This is because these steps and screenshots were created from Windows 98. Windows 95 and Windows

Millennium Edition are very similar, but not identical, to Windows 98.

Step 1. Configure TCP/IP Settings

After you have completed the hardware setup by connecting your devices, you need to configure your computer to connect to your Barricade. You need to determine how your ISP issues your IP address. Many ISPs issue these numbers automatically using a networking technology known as

Dynamic Host Control Protocol, or DHCP. Other ISPs will specify your IP address and associated numbers, which you must enter manually. This is also known as a static IP address.

How your ISP assigns your IP address determines how you will configure your computer.

Page 3

Here is what to do:

1. From the Windows desktop, click the “Start” button. Choose

“Settings,” then click “Control Panel.”

2. From “Control Panel,” double-click the

“Network” icon.

3. In the “Network” window, under the “Configuration” tab, double-click the “TCP/IP” entry that is listed with your network card.

Page 4

4. Select the “IP Address” tab.

If “Obtain an IP address automatically” is already selected, your computer is already configured for DHCP. Click “Cancel” to close each window, and skip to Step 2 “Disable HTTP Proxy.”

5. Locate your IP address and Subnet Mask. Record them in the spaces provided below.

6. Click the “Gateway” tab and record the numbers listed under

“Installed gateways.”

7. Click the “DNS Configuration” tab. Locate the DNS servers listed under “DNS Server Search Order.” Record the listed addresses.

8. After writing down your settings, check to make sure you have recorded them correctly. Click the “IP Address” tab and then click “Obtain an IP address automatically.” Click OK.

9. Windows may need your Windows 95/98/ME CD to copy some files. After it finishes copying, it will then prompt you to restart your system. Click “Yes” and your computer will shut down and restart.

Page 5

TCP/IP Configuration Setting

IP Address

Subnet Mask

Primary DNS Server

Secondary DNS Server

Default Gateway

____.____.____.____

____.____.____.____

____.____.____.____

____.____.____.____

____.____.____.____

Step 2. Disable HTTP Proxy

You will need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your Web browser will be able to view the configuration pages inside your Barricade.

The following steps are for Internet Explorer and for Netscape. Determine which browser you use and follow the appropriate steps.

Internet Explorer

1. Open Internet Explorer and click the stop button. Click

“Tools,” then “Internet Options.”

2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings…” button.

3. Clear all the checkboxes.

4. Click “OK,” and then click “OK” again to close the “Internet

Options” window.

Page 6

Netscape

1. Open Netscape and click the stop button. Click “Edit,” then click

“Preferences…”

2. In the “Preferences” window, under “Category” double-click “Advanced,” then click “Proxies.”

Select “Direct connection to the Internet.” Click

“OK.”

3. Repeat these steps for each Windows 95/98/Me computer connected to your Barricade.

Step 3. Obtain IP Settings from Your Barricade

Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing any old IP settings and renewing them with settings from your Barricade, you will also verify that you have configured your computer correctly.

1. Click “Start,” then “Run…”

2. Type “WINIPCFG” and click “OK.” It may take a minute or two for the “IP Configuration” window to appear.

Page 7

3. From the drop-down menu, select your network card. Click

“Release” and then “Renew.” Verify that your IP address is

now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168. 2.1. These values confirm

that your Barricade is functioning. Click “OK” to close the

“IP Configuration” window.

Now that your computer is configured to connect to your Barricade, please skip to “

Configuring

Your Barricade

” on page 21.

Configuring Your Computer with Windows 2000

Step 1. Configure TCP/IP Settings

After you have completed the hardware setup, you need to configure your computer to connect to your Barricade. You also need to determine how your ISP issues your IP address. Many ISPs issue these numbers automatically, using a networking technology known as Dynamic Host

Control Protocol, or DHCP. Other ISPs will specify your IP address and associated numbers, which you must enter manually. This is also known as a static IP address. How your ISP assigns your IP address determines how you will configure your computer.

Here is what to do:

1. From the Windows desktop, click the “Start” button. Choose

“Settings,” then click “Control Panel.”

2. Double-click the “Network & Dial-Up Connections” icon.

Page 8

3. Double-click the icon that corresponds to the connection to your Barricade.

4. Click “Properties.”

5. Double-click “Internet Protocol (TCP/IP).”

6. All the information that you need to record is on the

“Internet Protocol (TCP/IP) Properties” dialog box. Use the spaces below to record the information.

If “Obtain an IP address automatically” and “Obtain DNS server address automatically” are already selected, your computer is already configured for DHCP. Click “Cancel” to close each window, and skip to Step 2 “Disable HTTP Proxy.”

7. Select “Obtain an IP address automatically” and then select

“Obtain DNS server address automatically.” Then click

“OK.” Click “OK” or “Close” to close each window.

Page 9

TCP/IP Configuration Setting

IP Address ____.____.____.____

Subnet Mask

Primary DNS Server

Secondary DNS Server ____.____.____.____

Default Gateway

____.____.____.____

____.____.____.____

____.____.____.____

Step 2. Disable HTTP Proxy

You will need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your Web browser will be able to view the configuration pages inside your Barricade.

The following steps are for Internet Explorer and for Netscape. Determine which browser you use and follow the appropriate steps.

Internet Explorer

1. Open Internet Explorer and click the stop button. Click

“Tools,” then “Internet Options.”

2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings…” button.

3. Clear all the checkboxes.

4. Click “OK,” and then click “OK” again to close the “Internet

Options” window.

Page 10

Netscape

1. Open Netscape and click the stop button. Click “Edit,” then click

“Preferences…”

2. In the “Preferences” window, under “Category” double-click “Advanced,” then click “Proxies.”

Select “Direct connection to the Internet.” Click

“OK.”

Step 3. Obtain IP Settings From Your Barricade

Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing any old IP settings and renewing them with settings from your Barricade, you will also verify that you have configured your computer correctly.

1. From the Windows desktop, click the “Start” button, then “Programs,” then “Accessories,” and then click

“Command Prompt.”

2. In the “Command Prompt” window, type “IPCONFIG /RELEASE” and press the <ENTER> key.

Page 11

3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that

your IP address is now

192.168.2.xxx (2-255), your Subnet

Mask is 255.255.255.0 and your

Default Gateway is 192.168.2.1.

These values confirm that your

Barricade is functioning.

4. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.

Now that your computer is configured to connect to your Barricade, please skip to “

Configuring

Your Barricade

” on page 21.

Page 12

Configuring Your Computer with Windows NT 4.0

Step 1. Configure TCP/IP Settings

After you have completed the hardware setup, you need to configure your computer to connect to your Barricade. You need to determine how your ISP issues your IP address. Many ISPs issue these numbers automatically using a networking technology known as Dynamic Host Control

Protocol, or DHCP. Other ISPs will specify your IP address and associated numbers, which you must enter manually. This is also known as a static IP address. How your ISP assigns your IP address determines how you will configure your computer.

Here is what to do:

1. From the Windows desktop click “Start,” then

“Settings,” and click “Control Panel.”

2. Double-click the “Network” icon.

3. Select the “Protocols” tab.

4. Double-click “TCP/IP Protocol.”

Page 13

5. Select the “IP Address” tab.

6. In the “Adapter” drop-down list, be sure your Ethernet adapter is selected.

If “Obtain an IP address automatically” is already selected, your computer is already configured for DHCP. Click

“Cancel” to close each window, and skip to Step 2 “Disable

HTTP Proxy.”

7. In the “TCP/IP Properties” dialog box, click the IP address tab to locate your IP address, subnet Mask, and default gateway. Record these values in the space provided below.

8. Click the “DNS” tab to see the primary and secondary

DNS servers. Record these values in the appropriate spaces below.

9. After writing down your IP settings, click the IP address tab. Select “Obtain IP address automatically” and click

OK. Click OK again to close the “Network” window.

10. Windows may copy some files, and will then prompt you to restart your system. Click “Yes” and your computer will shut down and restart.

TCP/IP Configuration Setting

IP Address ____.____.____.____

Subnet Mask

Primary DNS Server

____.____.____.____

____.____.____.____

Secondary DNS Server

Default Gateway

____.____.____.____

____.____.____.____

Step 2. Disable HTTP Proxy

You will need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your Web browser will be able to view the configuration pages inside your Barricade.

The following steps are for Internet Explorer and for Netscape. Determine which browser you use and follow the appropriate steps.

Page 14

Internet Explorer

1. Open Internet Explorer and click the stop button. Click

“Tools,” then “Internet Options.”

2. In the “Internet Options” window click the “Connections” tab. Next, click the “LAN Settings…” button.

3. Clear all the checkboxes.

4. Click “OK,” and then click “OK” again to close the

“Internet Options” window.

Netscape

1. Open Netscape and click the stop button. Click “Edit,” then click

“Preferences…”

2. In the “Preferences” window, under “Category” double-click “Advanced,” then click “Proxies.”

Select “Direct connection to the Internet.” Click

“OK.”

Page 15

Step 3. Obtain IP Settings From Your Barricade

Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing any old IP settings and renewing them with settings from your Barricade, you will also verify that you have configured your computer correctly.

1. From the Windows desktop, click the “Start” button, then

“Programs,” and then select “Command Prompt.”

2. In the “Command Prompt” window, type

“IPCONFIG /RELEASE” and press the

<ENTER> key.

3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP

address is now 192.168.2.xxx, your

Subnet Mask is 255.255.255.0 and your

Default Gateway is 192.168.2.1. These values confirm that your Barricade is

functioning.

4. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.

Now that your computer is configured to connect to your Barricade, please continue to

Configuring Your Barricade

” on page 21.

Page 16

Configuring Your Macintosh Computer

You may find that the instructions here do not exactly match your screen. This is because these steps and screenshots were created using Mac OS 8.5. Mac OS 7.x and above are all very similar, but may not be identical to Mac OS 8.5.

Step 1. Configure TCP/IP Settings

After you have completed the hardware setup, you need to configure your computer to connect to your Barricade. You need to determine how your ISP issues your IP address. Many ISPs issue these numbers automatically using a networking technology known as Dynamic Host Control

Protocol, or DHCP. Other ISPs will specify your IP address and associated numbers, which you must enter manually. This is also known as a static IP address. How your ISP assigns your IP address determines how you will configure your computer.

Here is what to do:

1. Pull down the Apple Menu. Click “Control Panels” and select TCP/IP.

2. In the TCP/IP dialog box, make sure that “Ethernet” is selected in the “Connect Via:” field.

If “Using DHCP Server” is already selected in the

“Configure” field, your computer is already configured for DHCP. Close the TCP/IP dialog box, and skip to

Step 2 “Disable HTTP Proxy.”

3. All the information that you need to record is on the “TCP/IP” dialog box. Use the space below to record the information.

Page 17

4. After writing down your IP settings, select “Using DHCP Server” in the “Configure” field and close the window.

5. Another box will appear asking whether you want to save your TCP/IP settings. Click Save.

TCP/IP Configuration Setting

IP Address ____.____.____.____

Subnet Mask ____.____.____.____

Router ____.____.____.____

Name Server ____.____.____.____

Step 2. Disable HTTP Proxy

You will need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your Web browser will be able to view the configuration pages inside your Barricade.

The following steps are for Internet Explorer and for Netscape. Determine which browser you use and follow the appropriate steps.

Internet Explorer

1. Open Internet Explorer and click the stop button. Click “Edit” and select

“Preferences.”

2. In the Internet Explorer Preferences window, under Network, select Proxies.

3. Uncheck all checkboxes and click OK.

Page 18

Netscape

1. Open Netscape and click the stop button. Click “Edit” and select

“Preferences.”

2. In the “Preferences” dialog box, In the left-hand column labeled “Category,” select “Advanced.”

Under the “Advanced” category, select

“Proxies.”

3. Select “Direct Connection to the Internet” and click OK

Step 3. Obtain IP Settings From Your Barricade

Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing any old IP settings and renewing them with settings from your Barricade, you will also verify that you have configured your computer correctly.

1. Pull down the Apple Menu. Click “Control Panels” and select TCP/IP.

Page 19

2. In the TCP/IP window, your new settings will be shown. Verify that your IP address is now

192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your Barricade is

functioning.

3. Close the TCP/IP window.

Now that your computer is configured to connect to your Barricade, please skip to “

Configuring

Your Barricade

” on the next page.

Page 20

Configuring Your Barricade

Now that you have successfully configured your computer and retrieved your new network settings from your Barricade, you are ready to configure the Barricade’s settings for your LAN.

1. Open your Web browser (i.e., Internet Explorer or Netscape Navigator) and click the stop button.

2. In the “Address” field type “http://192.168.2.1” and press

<ENTER>.

3. The Barricade login screen will appear. Leave the Password field empty and click on “login”. There is no password by default. For security reasons, you should assign a password as soon as possible.

Note that the password login in case sensitive.

4. On the main page of the Barricade Web console, click “Setup.”

5. The Barricade’s automated setup process will take you through each step for setting up your Barricade. Click

“Enter” to start the process.

Page 21

Using a password can protect your Barricade from unauthorized changes. Not using a password can easily leave your Barricade—and your network—open to security risks. We recommend using a password for the security of your network. If you use a password, write it down and keep it in a safe place, or make sure you can remember it.

6. In the “Change Password” screen, enter your current password in the “Current

Password” field. If you have not yet set a password, leave it blank. Choose a password for your Barricade and enter it in the next two fields, “New Password” and “Re-Enter Password for

Verification.”

7. Click “ENTER” when finished.

8. Select your time zone from the list and click “ENTER.”

The LAN screen is where you configure the

LAN (Local Area Network) settings of your Barricade. These settings will only be visible to your local network and not to the

Internet.

9. In most applications, you should not change the “IP address” from the default (192.168.2.1). However, if you are implementing your Barricade into an existing network, you may need to

Page 22

change it to match your current addressing scheme.

By using the Barricade’s built-in DHCP (Dynamic Host Control Protocol) server you are allowing the Barricade to handle all the IP addressing on your Local Area Network (LAN). This can save you much of the time and hassle of administrating your network. If you have a server on your network that requires a static IP address, you may still use the DHCP server and manually assign a static IP address to your server. We recommend leaving the DHCP Server

“Enabled.”

10. In most applications, you should leave the DHCP Server “Enabled.” If you prefer to handle all the IP addressing on your network yourself, click disable.

11. There is usually no need to change the

IP address pool. If you change the pool range, make sure the first three octets match the Barricade’s IP address, i.e.,

192.168.2.xxx thru 192.168.2.yyy

A Domain Name Server (DNS) is like an index of names and Web addresses. If you type a Web address into your browser, such as www.whitehouse.gov, a DNS server will find that name in its index and find the matching IP address: 198.137.240.92. Most ISPs provide a DNS server for speed and convenience. Since you are connecting to the Internet with dynamic IP settings, it is likely that your DNS servers are also provided dynamically.

12. Click “ENTER” when finished.

At this point, the LAN side of your Barricade is now configured. But you must still configure it to connect to the Internet. There are three different general configurations for high-speed Internet connections. You need to know about your Internet connection to determine which configuration to use. You found out most of what you need to know when you recorded your IP settings in earlier steps. Here are some guidelines to determine which configuration you should use:

• If you connect to the Internet using a Cable Modem, your ISP probably uses DHCP to issue an IP address to you. If you use a Cable Modem or you know you use a dynamic IP address, please go to “

Configuring Your Barricade for a Dynamic IP

Address

” on the next page.

• If you connect to the Internet using a DSL Modem, your ISP probably requires you to manually enter your TCP/IP settings. If you have a DSL connection or if you know you use a static IP address, please go to “

Configuring Your Barricade for a Static

IP Address

” on page 26.

• If you connect to the Internet using a DSL Modem and you use a login name and password, your ISP uses PPPoE. If your ISP requires a login name and a password or you know your ISP uses PPPoE, please go to “

Configuring Your Barricade for

PPPoE

” on page 28.

Page 23

Configuring Your Barricade for a Dynamic IP Address

1. Select “Dynamic IP address,” and click

“More Configuration.”

Both options on this page for further configuring your dynamic IP address are optional, depending upon how your ISP works. If your ISP does not require you to change either of these, you may skip these settings.

The @Home network usually requires your computer to have a “Host Name” to obtain an IP address from their network.

2. If you have a host name provided by your ISP (i.e., CX-1234-56789) enter it in the “Host Name” field.

Some ISPs register the MAC Address of your network card. A MAC (Media Access Control)

Address is a unique identification number (in hexadecimal digits) given to each networking device. Once registered, the ISP’s server will check to make sure that the MAC address they have registered matches the one connecting to their servers. If it does not match, you cannot connect. The Barricade’s MAC Address will not be the same as your network card’s address so you may need the Barricade to “Clone” the address from your network card. Then the ISP will find a MAC Address that matches the one they have recorded.

Page 24

3. If you need to “Clone” the MAC

Address from your network card, click

“Clone MAC Address.” The MAC

Address field will display the new address.

4. Click “ENTER” when finished.

A Domain Name Server (DNS) is like an index of names and Web addresses. If you type a Web address into your browser, such as www.whitehouse.gov, a DNS server will find that name in its index and find the matching IP address: 198.137.240.92. Most ISPs provide a DNS server for speed and convenience. Since you are connecting to the Internet with dynamic IP settings, it is likely that your DNS servers are also provided dynamically.

5. If you are connecting to the Internet with a dynamic IP address, you probably do not need to enter anything here. However, if there is a DNS server that you would rather use, enter the

DNS server addresses in the spaces provided.

6. Click “ENTER” when finished.

Many ISPs use modems that automatically configure themselves. Sometimes connection information is stored on the modem and needs to be updated. You may need to shut down and restart your modem after you have configured your Barricade.

7. Restart your cable modem by removing the power, waiting a few seconds, and then reconnecting it.

Congratulations! Configuration is complete and your Barricade is now connected to the Internet.

There are also some advanced configuration options that may be configured, but we do not recommend making any changes to these options unless you need to. You can consult the User

Guide for information on these advanced settings.

For instructions for the advanced configuration options, please refer to Chapter 4 of the User

Guide found on the CD.

Page 25

Configuring Your Barricade for a Static IP Address

1. Select “Static IP address,” and click

“More Configuration.”

2. Enter the IP address, subnet mask, and gateway provided to you by your ISP in the appropriate fields. You recorded these numbers earlier when you configured your computer to connect to the Barricade.

3. Click “ENTER” when finished.

A Domain Name Server (DNS) is like an index of names and Web addresses. If you type a Web address into your browser, such as www.whitehouse.gov, a DNS server will find that name in its index and find the matching IP address: 198.137.240.92. Most ISPs provide a DNS server for speed and convenience. Since you are connecting to the Internet with static IP settings, it is likely that your ISP also provided DNS server addresses.

Page 26

4. Enter the DNS server address(es) in the spaces provided.

5. Click “ENTER” when finished.

Many ISPs use modems that provide auto-configuration. Sometimes connection information is stored on the modem and needs to be updated. You may need to shut down and restart your modem after you have configured your Barricade.

6. Restart your DSL modem by removing the power, waiting a few seconds, and then reconnecting it.

Congratulations! Configuration is complete and your Barricade is now connected to the Internet.

There are also some advanced configuration options that may be configured, but we do not recommend making any changes to these options unless you need to.

For instructions for the advanced configuration options, please refer to Chapter 4 of the User

Guide found on the CD.

Page 27

Configuring Your Barricade for PPPoE

1. Select “PPP over Ethernet,” and click

“More Configuration.”

2. Enter the User Name and Password required by your ISP in the appropriate fields. Enter the password again for verification in the “Please retype password” field.

3. If your ISP has provided you with a

“Service Name” enter it in the “Service

Name” field, otherwise, leave it blank.

4. Click “ENTER” when finished.

A Domain Name Server (DNS) is like an index of names and Web addresses. If you type a Web address into your browser, such as www.whitehouse.gov, a DNS server will find that name in its index and find the matching IP address: 198.137.240.92. Most ISPs provide a DNS server for speed and convenience. Since you are connecting to the Internet with dynamic IP settings, it is likely that your DNS servers are also provided dynamically.

Page 28

5. If you are connecting to the Internet through PPPoE, you probably do not need to enter anything here. However, if there is another DNS server that you would rather use, enter the DNS server addresses in the spaces provided.

6. Click “ENTER” when finished.

Many ISPs use modems that provide autoconfiguration. Sometimes connection information is stored on the modem and needs to be updated. You may need to shut down and restart your modem after you have configured your Barricade.

7. Restart your DSL modem by removing the power, waiting a few seconds, and then reconnecting it.

Congratulations! Configuration is complete and your Barricade is now connected to the Internet.

There are also some advanced configuration options that may be configured, but we do not recommend making any changes to these options unless you need to.

For instructions for the advanced configuration options, please refer to Chapter 4 of the User

Guide found on the CD.

Page 29

Configuring Your Barricade for Dialup on Demand

1. Select “Dialup on Demand,” and click

“More Configuration.”

2. If the serial port is used for primary

Internet access, then mark the item

“Check if you only use a dial-up modem to connect to the Internet.” If not marked, then this connection will only be used for backup access if the primary WAN link fails.

3. Enter your ISP account user name and password in the “Dial-Up

Account Information.”

4. Enter the “ Modem Initialization

String” provided by your modem manufacturer. The following is a sample initialization string: “ATQ1SO=1&D0&K0&W” as defined below:

Q1 : Inhibit result codes to DTE

S0=1 : Auto answer on first ring

D0 : Don’t care DTR

K0 : Disables DTE/DCE flow control

W : Write command to modem memory

5. In the “Maximum Idle time” field, enter the maximum idle time for the Barricade (in second).

6. If you are assigned a dynamic IP address every time you dial up, mark “No” for “Has your

Internet Service Provider given you an IP address?” However, if your ISP has assigned a fixed IP address for you to use, mark “Yes” for this item and enter the IP address and subnet mask.

7. If your ISP has given you a secondary phone number, or if you have a secondary Internet service account, then fill in the relevant fields under “Secondary Dial-up.”

Page 30

Configuring Your Computer for the Barricade Print Server

If you are not connecting your printer to your Barricade, skip this section.

With the Barricade’s built-in print server, you can connect your printer to the Barricade and print from any computer on your network. Each computer needs to have a “client” installed that will communicate with the Barricade’s print server. Windows 2000 and UNIX and Linux operating systems have a print client already installed. If you are running Windows 95, 98, ME, 2000 or

NT, you must use the SMC Barricade Print Server Monitor as your print client.

Configuring Your Computer for the Barricade Print Server for

Windows 95/98/NT/ME/2000

Step 1: Installing SMC Barricade Print Server Monitor

You must first install the software that will allow your programs to print to the printer attached to the Barricade.

1. Insert the Installation CD into your CD-ROM drive.

2. Click “Start” and “Run…”

3. Type “D:\PrintSvr\Setup” and click “OK.”

4. InstallShield will guide you through the installation process.

Click “Next >” for each window and “Finish” when complete.

5. Windows must reboot for the changes to take place. When asked if you want to reboot now, select yes and click “OK.”

Page 31

Page 32

Configuring Your Computer for the Barricade Print Server

If you are not connecting your printer to your Barricade, skip this section.

With the Barricade’s built-in print server, you can connect your printer to the Barricade and print from any computer on your network. Each computer needs to have a “client” installed that will communicate with the Barricade’s print server. Windows 2000 and UNIX and Linux operating systems have a print client already installed. If you are running Windows 95, 98, ME, 2000 or

NT, you must use the SMC Barricade Print Server Monitor as your print client.

Configuring Your Computer for the Barricade Print Server for

Windows 95/98/NT/ME/2000

Step 1: Installing SMC Barricade Print Server Monitor

You must first install the software that will allow your programs to print to the printer attached to the Barricade.

6. Insert the Installation CD into your CD-ROM drive.

7. Click “Start” and “Run…”

8. Type “D:\PrintSvr\Setup” and click “OK.”

9. InstallShield will guide you through the installation process.

Click “Next >” for each window and “Finish” when complete.

10. Windows must reboot for the changes to take place. When asked if you want to reboot now, select yes and click “OK.”

Page 33

Step 2: Configuring SMC Barricade Print Server Monitor

Now that the software is installed, it must be configured to work properly.

1. Click “Start,” click “Settings,” and then select “Printers.”

2. Double-click “Add Printer.”

3. Follow the screen prompts to add your printer as a “Local printer” for Windows 95/98/ME/2000 or as a printer managed by “My Computer” for Windows NT.

Page 34

4. From the list of manufacturers and printers in the next window, select the printer you have attached to the Barricade.

5. Select the SMC Barricade Print Server Monitor (the default port name is “SMC100”) and click “Configure

Port…”

6. Enter the Barricade’s IP address in the “IP address” field (default is 192.168.2.1) and click “OK.”

7. You will be asked if you want to print a test page. Click “Yes” to make sure that your printer is configured correctly.

8. Your printer will now appear in the “Printers” window. Your computer is configured to print via the Barricade Print Server. Repeat these steps on each computer connected to the

Barricade.

Configure the Network Printer in Unix Systems

Follow the traditional configuration procedure on Unix platforms to set up the Barricade print server. The printer name is “lpt1.”

Page 35

FOR TECHNICAL SUPPORT, CALL:

From U.S.A. and Canada (24 hours, 7 days a week)

(800) SMC-4-YOU; (949) 707-2400; (949) 707-2460 (Fax)

From Europe (8:00 AM - 5:30 PM UK Greenwich Mean Time)

44 (0) 1188 748740; 44 (0) 1189 748741 (Fax)

INTERNET

address: [email protected]

[email protected]

http://www.smc.com/support.htm

Wide http://www.smc.com/

FOR LITERATURE OR ADVERTISING RESPONSE, CALL:

U.S.A. and Canada (800) SMC-4-YOU; Fax (949) 707-2460

Spain

UK

34-93-477-4920;

44 (0) 1188 748700;

Fax 34-93-477-3774

Fax 44 (0) 1189 748701

Southern Europe

Central/Eastern Europe

33 (1) 41.18.68.68;

49 (0) 89 92861-200;

Fax 33 (1) 41.18.68.69

Fax 49 (0) 89 92861-230

Nordic

Middle East

South Africa

46 (8) 564 33145;

971-48818410;

27 (0) 11-3936491;

Fax 46 (8) 87 62 62

Fax 971-48817993

Fax 27 (0) 11-3936491

Fax

Taiwan 886-2-2659-9669;

Aisa Pacific (65) 238 6556; Fax (65) 238 6466

Korea 82-2-553-0860;

Japan 81-45-224-2332; Fax 81-45-224-2331

Australia

India

61-2-9416-0437;

91-22-8204437;

Fax 61-2-9416-0474

Fax 91-22-8204443

6 Hughes

Irvine, CA 92618

Phone: (949) 707-2400

Model Numbers: SMC7004ABR

SMC7008ABR

Publication Number: 150200002700A

Edition Number: E082001-R01 F1.3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement