VisionRGB-X2
VisionRGB-X2
Dual Channel RGB/DVI/HD Capture Card
Advanced Graphics Display Technology
HD 1080p
HDMI 1080p
DVI - 1920x1200
RGB 2048x1536
DESCRIPTION
The VisionRGB-X2 has two complete capture channels,
The VisionRGB-X2 is an ideal solution for applications that
each supporting up to 1920 x 1200 DVI or 2048x1536 Analog
require the capture of Analog or DVI sources in real time.
resolution.
Typical applications include:
The VisionRGB-X2 captures the Analog/DVI data and triple
•
Viewing Analog or DVI sources from PCs, MACs,
buffers it into onboard storage. This data is then copied us-
Industrial/medical equipment, cameras and other video
ing DMA to the host system for display, storage or
equipment.
streaming.
When a Datapath graphics card is used, the VisionRGB-X2
transfers the data directly to the graphics card thereby
increasing performance. The VisionRGB-X2 sends the
relevant portions of each captured image to each display
channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and
dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath
graphics card, the VisionRGB-X2 sends the data to system
memory or direct to the graphics card, dependant on the
software used for display.
•
Streaming video applications.
•
Video/Data Wall Controllers
FEATURES
SOFTWARE
The VisionRGB-X2 is supplied with a powerful
•
Half size 64 bit PCI-X Card.
•
Dual Channel real-time Analog or DVI capture with
format of the input sources and displaying the data.
high speed 500MB/s DMA transfer.
Simply connect your external DVI or Analog source
Capture resolutions up to 2048 x1536 Analog or
into the card, run the VisionRGB-X2 application to
1920 x1200 DVI and HD modes.
automatically detect the video source format and
•
•
Support for non-interlace video sources.
•
On board processor providing auto-sync and capture mode detection.
•
64MB DDR capture memory.
•
Software compatible with the VisionRGB-PRO
product range.
•
Includes WDM streaming drivers and the Datapath
VisionRGB application software.
•
•
•
•
•
software application for configuring the timing and
display the captured video in a window on your
desktop.
WALL CONTROL SOFTWARE
The VisionRGB-X2 card is supplied with a free version
of Wall Control without the advanced features.
Wall Control presents a representational window of the
entire display wall showing position and size of video
windows.
Datapath Wall Control software enables you to con-
Fully integrated with the Datapath Wall Control
figure your multi-screen display, launch video overlays
software for video wall applications.
and create a wall layout configuration. With the full
VisionRGB-X2 is also optimised for operation with
version it is possible to save layouts and recall them for
the Datapath range of graphics cards.
future use and also operate Wall Control on a remote
Support for multiple cards allowing up to 32
PC via a network connection.
capture channels. (16 cards)
Wall Control is available in two versions:
Support for Windows® XP/ Vista / Server 2003
•
Wall Control - Free version.
Server 2008 and Windows® 7.
•
Wall Control-PRO-HK - Licensed version with a
hardware USB key (dongle)
Datapath SDK included for software developers.
•
Vision800/860 with added support for IP Video
VIDEO STREAMING
For streaming applications, the VisionRGB-X2 can
be used with Windows Media Encoder to compress
Wall Control-red - Designed for use with the
Cameras
MODELS AVAILABLE
and stream captured video. To replay the video, use
Code
Description
Windows® Media Player.
VisionRGB-X2
2 channel RGB/DVI capture card
PCI-X PLUS 2 x DVI-VGA, 1 x DVI/
Any application compatible with Windows Direct-
Component and 1 x DVI/HDMI
Show technology can use the VisionRGB-X2 due to its
Adapters
built-in WDM support.
All products are shipped with the latest software
available, unless stated otherwise.
Special requirements may be organised by contacting
our Sales team.
SPECIFICATION
Board Format
64 bit, up to 66MHz PCI-X, half size plug-in card 105mm x 170mm.
PCI Bus Master with scatter/gather DMA providing up to 1GB/sec peak, 500MB/
sec sustained.
Connectors
Two DVI-I Type connectors.
Maximum Sample Rate
170 MHz analogue RGB or 165MHz DVI.
Video Sampling
RGB: 24 bits per pixel/8-8-8 format.
Video Capture Memory
64MB (updated in real time). Triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920 x 1200, 2048 x 1536,
Custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1200. HD
modes (using a Component-DVI connector)1080p,1080i, 720p, 576p, 576i, 480p
and 480i and Custom modes.(HDCP modes not supported)
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV 4:2:2: UYVY, YUY2, YVYU.
MONO: 8bit
Update Rate
User defined, typically up to 60 frames per second, limited by available PCI
bandwidth.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire). )
Analog RGB with Composite Sync (4 wire). )Analog RGB with Sync on Green (3 wire).
)
DVI Single Link.
Progressive
Operating System Support
Windows® XP Professional (x86 and x64), Windows® Server 2003 (x86 and x64),
Windows Vista® (x86 and x64), Windows® Server 2008 (x86 and x64) and Windows® 7
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 0.6A.
Max power – 8 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Analog Input Range
Min 0.5Vpp Max 1.0Vpp
Input Offset
+/-2V
Hsync
15kHz - 110kHz
Vsync
No hardware limits, typically 25Hz - 200Hz for real signals
Separate Sync Polarity
Positive or Negative. (Separate H & V sync, Composite Sync).
Sync On Green Polarity
Negative
Inputs
75 Ohm terminated
Warranty
1 year
MAIN SALES DEPARTMENT
We are continously developing the technology used within our product
Datapath Limited,
Alfreton Road
Derby, DE21 4AD
England
Tel: (+44) (0) 1332 294441
Fax: (+44) (0) 1332 290667
Email: sales@datapath.co.uk
Web: http://www.datapath.co.uk
specification may change from time to time.
ranges delivering outstanding innovative solutions, therefore the
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising