Oglas
Oglas
Setting up 9Cookies Caller ID Caller ID enables 9Cookies to automatically grab your customers’ phone numbers without you having to hit a key. In this quick guide, we will get you up and running with Caller ID in minutes. Cable A Step 1 Modem This device is a modem, which will transfer the phone data to the Caller ID Box. Connect Cable A to one of the yellow network ports on your Wi-Fi router. Caller ID Box MODEM CALLER ID BOX Note: You may have to change the cables for the Modem and Phone Splitter to suit your needs. Phone cables can easily purchased in any shop that sells home phones. The Caller ID Box is where the number is extracted from a customer’s phone call and sent to the 9Cookies app. We have carefully connected all the cables into it for you. The cables are labelled so you can quickly use this guide to plug everything in. Plug your phone in here First disconnect your phone from the wall socket and connect Cable B in it’s place. Then connect your phone into the free side of the phone splitter. Step 2 PHONE SPLITTER Cable C Step 3 Connect Cable C to a power socket. Cable B Step 4 The system should start up automatically and be ready in around two minutes. When it is ready, customer numbers will appear in 9Cookies after the second ring of the phone. Questions? You can reach our free of charge Customer Support Hotline at 0800 612 2233 ">
/
Preuzimanje
Samo prijateljski podsjetnik. Dokument možete pogledati ovdje. Ali što je najvažnije, naš AI ga je već pročitao. Može objasniti složene stvari jednostavnim riječima, odgovoriti na vaša pitanja na bilo kojem jeziku i pomoći vam da brzo navigirate čak i najdužim ili najkompliciranijim dokumentima.
Oglas