Hifonics® - 2016 Catalog
2016
Product Line
POWER
FROM THE
GODS
SINCE 1981
TABLE
OF
CONTENTS
35th Anniversary Super Amplifiers
3
ELITE
Brutus Elite BE35 Amplifiers
7
Zeus Elite ZEX Amplifiers
11
Brutus Elite Speakers
15
Brutus Elite Subwoofers
17
Thor Powersports
19
Hercules H35 Amplifiers
21
Brutus BRX Amplifiers
23
Zeus ZRX Amplifiers
27
Brutus Subwoofers
31
Hercules Subwoofers
33
Hercules Speakers
34
Signal Processors
35
The Hifonics SUPER AMPS
The 35th Anniversary of Power From The Gods and Hifonics are celebrated with
throwback competition amplifiers. CEA certified RMS amplifiers. Three models are offered
to create the perfect system design. A Large Ultra D Class™ dual mono, a standard Ultra D
Class™ mono and a four channel Super A/B Class™. Here is the break down.
The entire line up is designed with an old school heatsink that harkens back to the
beginning of the car audio revolution, but now Hifonics is twisted with new technology and
features that make these Super Amps the best.
Colossus 35th Anniversary
The Colossus celebrates the 35th Anniversary
of Hifonics with a CTA certified super amp. The
Colossus uses the Hifonics engineer’s technology,
Ultra D Class™ in a Dual Mono block subwoofer
amplifier that will deliver 3400 watts RMS.
Colossus Dual Mono Ultra D-Class™
The Colossus represents Hifonics best signal processing and
control features designed for a big mono amplifier. Key among
them are the Dual Mono Ultra D-Class™ topology which helps
the Colossus develop huge power while minimizing voltage
strain. The “Dual” means there are literally two amplifiers in one
heat sink for system designs that need to develop large power
without giving up additional space.
The ParaQ circuit allows full parametric control of the bass
equalizer which can be controlled by the diagnostic bass
remote. Additionally, there are variable subsonic and low pass
electronic filters.
Tiffany Style connectors
for audiophile signal
quality and maximum
signal throughput
Powerful transformers,
audiophile grade
components, military grade
circuit boards
Twin turbo power supply
torroids in a PWM MOSFET
power supply design
Rock solid Ultra-Fi™
MOSFET outputs
Goliath 35th Anniversary
The Goliath uses the same Ultra D Class™ circuit
topology, but in a traditional mono design. Perfect for
system designs where big clean power is needed
without the additional size of the Colossus
Goliath Ultra D-Class™ Mono Block
Goliath is a traditional mono amplifier designed around Hifonics
Ultra D-Class™ topology. Similar to Colossus in design, the Goliath
allows Multiple Goliath mono amplifiers to be strapped together
utilizing the Master/Slave feature to create a large subwoofer
system that will well exceed 6000 watts RMS. (Two Amplifiers)
Goliath uses the same ParaQ circuit to control the bass
equalization. Colossus, Goliath and Helios offer an additional output
set of RCA jacks to eliminate the need for splitter cables. Again,
the Hifonics engineers try and eliminate the additional signal paths
that can affect sound quality by
raising distortion levels.
Helios 35th Anniversary
Rounding out the trio of Super Amps is the Helios. The
same power efficiency of the larger amplifiers but
specifically engineered in to four channels of Super
A/B Class™ technology to add incredible sound quality
standard while providing enough power to upper
frequencies to perfectly balance a full system.
Helios Super A/B Class™
Helios is a very special amplifier. The same Short Path philosophy
applies, but being a four channel amplifier, designed to balance the
muscle of the Colossus or Goliath, requires some unique circuit
designs. First, this is a four channel Super A/B Class™ circuit
topology. This means, sound quality comes first but, the power
must be as efficient as the Ultra D and Super D Class Amplifiers.
Notice the MODE switch, this allows for 2 Channel or 4 channel
operation with the amplifier easily bridgeable or operated in three
channel mode.
Colossus
CEA Rated Specifications
<1% THD
Output Power Watt
4-Ohms
2-Ohms
1-Ohm2
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Low-Pass
Variable Subsonic Filter
2 x 650 RMS / 2 x 1300 Peak
2 x 1200 RMS / 2 x 2400 Peak
x 1700 RMS / 2 x 3400 Peak
1 x 3400 RMS / 1 x 6800 Peak
1 x 2400 RMS / 1 x 4800 Peak
35Hz-250Hz
15Hz-35Hz
Parametric
30-100Hz / Wide-Narrow / 0-10dB
Yes
Bass EQ
Remote Level Control
om
plian
t
Amp
li
ard
er
r Pow Stand
fie
Diagnostic Bass Remote
All three Hifonics SUPER AMPS
include a specialized Bass Remote
that allows remote adjustment of the
ParaQ bass remote feature.
Also critical is the Diagnostic ability
of viewing the amplifier status on the
L.E.D's of the remote.
CTA-2006 C
Hifonics SUPER AMPS are CTA certified.
The former CEA (Consumer Electronics
Association) is now the CTA, Consumer
Technology Association.
CTA-2006-B requires testing for RMS at
minimal distortion.
Goliath
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Variable Low-Pass
Variable Subsonic Filter
Bass EQ
Remote Level Control
<1% THD
1 x 3000 RMS / 1 x 6000 Peak
1 x 1500 RMS / 1 x 3000 Peak
1 x 750 RMS / 1 x 1500 Peak
35Hz-250Hz
15Hz-35Hz
Parametric
30-100Hz / Wide-Narrow / 0-10dB
Yes
om
plian
t
ard
Amp
li
er
r Pow Stand
fie
CEA Rated Specifications
CTA-2006 C
Helios
CEA Rated Specifications
<1% THD
Output Power Watt
4-Ohms4
2-Ohms4
1-Ohm
Mono Bridged @ 2-OhmsN
Stereo Bridged @ 4-Ohms2
Variable Hi-Pass1
Variable Low-Pass
Crossover Switch H
Remote Level Control
x 150 RMS / 4 x 300 Peak
x 300 RMS / 4 x 600 Peak
N/A
/A
x 600 RMS / 2 x 1200 Peak
0Hz-500Hz (1x/10x)
30Hz-500Hz (1x/10x)
P/FULL/LP
Yes
Brutus ELITE 35th Anniversary
The ELITE dealer is the ONLY place to choose Hifonics ELITE amplifiers, subwoofers or
speakers. ELITE Dealers have the training and experience to help design and install your
system perfectly. Do no purchase ELITE products from the internet. ELITE product is
only authorized for ELITE dealers. Any purchase from an online dealer or auction site is
an unauthorized dealer and it will affect your warranty.
The BE35 amplifiers continue….
Brutus ELITE Dealer
Find the perfect dealer for your ELITE
system and installation
Super D-Class™
Super D-Class™ digital technology has been
engineered for the 35th Anniversary mono
amplifiers to provide an extremely efficient,
low temperature, high amplification system
that others only dream about – this is the
sound of Hifonics big amplifiers.
Super A/B Class™
For customers building larger systems with
multiple four channel and mono amplifiers,
the Brutus Elite have flexible crossovers and
EQ controls to tailor the install and shape
the audio signal for each amplifier. To aide in
system set up, the BE35 line has variable
voltage from 6 volts to 0.2 volts. Additionally,
the Super D-Class amplifiers include variable
subsonic and low pass filters as well as 45HZ
bass EQ from 0-9dB.
There are several options for installation
and the mono Super D-Class Brutus Elite
amplifiers can run at 4, 2 or 1-Ohm for
tighter bass response while amplifiers run
cool and maximize the voltage from the cars
electrical system!
Tiffany Style RCA Inputs for
audiophile signal quality and
maximum signal throughout
Mega powerful transformers,
audiophile grade components,
military grade circuit boards
Twin turbo power supply
torroids in a PWM MOSFET
power supply design
Rock solid Ultra-Fi™
MOSFET outputs
Ultra-Fi™ MOSFET
Produces high power with minimal distortion
Low Noise Pre Amplifier
Maximum low voltage signal from the source
unit comes into the amplifier circuit with
minimal distortion
Nickel-plated Tiffany Style RCA inputs
Nickel-Plated RCA jacks create best connection
and resist corrosion
Full Range & Bridgeable
Flexible installation allows this amplifier to run in
two-channel or bridged mono mode
Five Channels of Brutus Elite
The Brutus Elite line offers a versatile 5 channel amp
that features both Super A/B and Super D-Class in one
amplifier. With it’s versatile crossover and equalization
circuitry, this five channel Brutus is a great single amp
system solution.
Available exclusively from Hifonics ELITE Dealers.
Variable Electronic
Electronic crossovers allow for complete control
of the sound.
4-Way System Protection Circuitry
Monitor thermal, overload, DC, and speaker short
protection with lighted indicators on the amplifier
end panel
All Mono amplifiers and the
BE35 5000.5 five channel
amplifier include a bass
remote with built in protection
circuitry to put the bass
control at arm’s length.
BE35 5000.5
Illumination
The new 35th Anniversary amplifiers feature
illuminated molded and angled Power/Ground and
Speaker terminals for stress free installation
The five channel BE35 5000.5
delivers incredible control for
system design. Inputs pass
through and all crossover controls
accessible on one molded and
illuminated connector
BE35 5000.5
Outputs on BE35 mono amplifiers
are designed for 1ga POWER &
GROUND cables. All BE35 feature
angled and illuminated connectors
BE35 800.4
Outputs on the 4 channel amplifiers
feature easy access fusing and
angled and illuminated connectors
BE35 500.4
Specs
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Mono Bridged @ 2-Ohms
Stereo Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
45Hz Bass EQ
4 x 65
4 x 125
N/A
N/A
2 x 250
10Hz - 1.5KHz
30Hz -150Hz
0 - 9dB
BE35 800.4
Specs
Output Power Watt
4-Ohms
4 x 100
2-Ohms4
x 200
1-OhmN
Mono Bridged @ 2-OhmsN
/A
/A
Stereo Bridged @ 4-Ohms
Variable Hi-Pass
2 x 400
10Hz - 1.5KHz
Variable Low-Pass
30Hz -150Hz
45Hz Bass EQ
0 - 9dB
BE35 1200.1D
Specs
Output Power Watt
4-Ohms1
2-Ohms
1-Ohm1
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
x 450
1 x 800
x 1200
40Hz-300Hz
10Hz-40Hz
0 - 9dB
Yes
BE35 1700.1D
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass
Variable Subsonic Filter1
45Hz Bass Boost
Remote Level Control
BE35 2100.1D
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass
Variable Subsonic Filter1
45Hz Bass Boost0
Remote Level Control
Specs
1 x 600
1 x 1000
1 x 1700
40Hz-300Hz
0Hz-40Hz
0 - 9dB
Yes
Specs
1 x 700
1 x 1400
1 x 2100
40Hz-300Hz
0Hz-40Hz
- 9dB
Yes
BE35 2500.1D
Specs
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass4
Variable Subsonic Filter1
45Hz Bass Boost
Remote Level Control
1 x 850
1 x 1700
1 x 2500
0Hz-300Hz
0Hz-40Hz
0 - 9dB
Yes
BE35 5000.5
Output Power Watt
4-Ohms4
2-Ohms
1-Ohm
Mono Bridged @ 2-Ohms
Stereo Bridged @ 4-Ohms
Variable Hi-Pass1
Variable Low-Pass
45Hz Bass EQ
Specs
x 60 + 1 x 200
4 x 90 + 1 x 350
1 x 500 (5ch)
N/A
2 x 180
0Hz - 1.5KHz
(Channel 1 - 4)
30Hz -150Hz
(Channel 3,4,5)
0 - 9dB
ZEUS ELITE
AMPLIFIERS
ZEUS ELITE POWER
Hifonics Zeus Elite amplifiers have been designed for delivering big
power with a great design. The ZEX have options of 2 and 4 channel
configurations, with four mono models offering power up to 3300
watts at 1 ohm.
Elite Status
ZEUS Elite amplifiers feature more power than standard
ZEUS ZRX models, making them very exclusive to your
system and Hifonics Elite dealers
Class D
Four big mono amplifiers, utilizing Class D technology to maximize
power and efficiency
Class A/B
Designed to be high sound quality with minimal distortion
SPC Simpatico Coil Design Pulse
Width Modulated power supply
Ultra-Fi™ MOSFET
Produces high power with minimal distortion
Low Noise Pre Amplifier
Maximum low voltage signal from the source unit comes into the
amplifier circuit with minimal distortion
Nickel-plated RCA inputs
Nickel-Plated RCA jacks create best connection and resist
corrosion
2 channel and bridged mono operation
Flexible installation allows this amplifier to run in
two-channel or bridged mono mode
Variable Electronic
Ultra-Fi™ MOSFET output devices
Electronic crossovers allow for complete control of the sound
High Grade Aluminum
Heavy duty aluminum alloy heat-sink allows amplifier to quickly
dissipate heat while producing maximum power
4-Way System Protection Circuitry
Monitor thermal, overload, DC, and speaker short protection with
lighted indicators on the amplifier end panel
Illuminated Logo
The Hifonics logo illuminates when the amplifier is powered, making
a #PowerFromTheGods statement in the dark
All Mono amplifiers include a bass remote
to put the bass control at arm’s length
Molded and angled
ILLUMINATED Terminals for
stress free installation access
All Specs on next spread with layout of all models of ZEX
ZEX650.2
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
2x300W
2x150W
N/A
1x600W
60Hz-1.2KHz
30Hz-250Hz
n/a
0-12dB
11.4” x 2.4” x 10”
ZEX650.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x150W
4x75W
N/A
2x300w
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
12.6” x 2.4” x 10”
ZEX1250.2
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
2x600W
2x300W
N/A
1x1200W
60Hz-1.2KHz
30Hz-250Hz
N/A
0-12dB
19.7” x 2.4” x 10”
ZEX1250.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x250W
4x125W
N/A
2x500W
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
15.7” x 2.4” x 10”
ZEX1350.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x1300W
1x650W
1x425W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~9dB
Yes
12.6” x 2.4” x 10”
ZEX1950.1D
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic
Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
ZEX2050.4
Specs
1x1900W
1x950W
1x525W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~9dB
Yes
15.7” x 2.4” x 10”
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x500W
4x250W
N/A
2x1000W
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
22.0” x 2.4” x 10”
ZEX2550.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x2500W
1x1250W
1x675W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~9dB
Yes
17.3” x 2.4” x 10”
ZEX3350.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x3300W
1x1650W
1x825W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~9dB
Yes
19.7” x 2.4” x 10”
ELITE SPEAKERS
BZE65C
BZE69CX
BZE65CX
VOICE OF THE GODS
The Elite speakers have been designed as a perfect companion to any of
the Hifonics Elite subwoofers and amplifiers. Regardless, if you are building
an import or an off-road 4x4, the DIN mounting holes make for simple
installation in most popular cars and trucks. The components have been
tested to deliver high impact music and handle plenty of power.
Features
Treated 1” Teteron
Smooth frequency response with a very wide
dispersion, making a larger than normal off axis
listening area or “sweet spot”.
Polyamide Composite Baskets
Very strong frame means that deep bass tones are
tighter and louder without causing flex which
adds distortion.
Oversized Spiders
Using a raised metal spider landing delivers extra
excursion on the mid bass drivers allows more
movement of air, which creates more volume with
the same amount of power when compared to
other speakers
Woven Glass Fiber Cones
Strength in the cone guarantees bass with
minimal distortion
Butyl Surrounds
Butyl rubber surrounds keep the piston motion of
the subwoofer linear and smooth
The component crossover features a 12db/octave
external crossover network with integrated
tweeter protection (COMPONENT)
Zeus Elite System
Four channel amplifier:
Stereo front for Elite components, stereo
rear with bridged mono subwoofer
BZE65C
BZE69CX
BZE65CX
6.5” Component
6x9”
6.5” coaxial
RMS
35
50
35
MAXX
70
100
70
Impedance
4 Ohm
4 Ohm
4 Ohm
Cut-Out Ø
5.59”
8.66x5.83”
5.59”
Chassis depth from flange
2.32”
2.99”
2.32”
Model
Size
Power handling
BRUTUS ELITE
SUBWOOFERS
ELITE BASS POWER
Brand new to the Elite line of products
is a very powerful line of subwoofers.
Designed to fit any installation, you can
choose the 12” dual voice coil designed
for a delivering big power in a ported
enclosure with 300 watts RMS and
600 peak or the new 10 and 12 inch
shallow mount subwoofers that require
just enough airspace to mount the
subwoofers. Perfect for installation behind
the seats of trucks or other vehicles
where space is at a premium.
BZE12D4
A big 600 watt 12 in subwoofer Dual 4 ohm voice coil
Woven Pressed Poly Cone
Heavy Duty woven texture polypropylene cone
develops big bass while dramatically reducing cone
flex which can rob the system of lowdeep bass.
Butyl Surround
Satin black linear Butyl rubber surround keeps the
piston motion of the subwoofer linear and smooth.
Voice Coil & Former Assembly
Vented aluminum former holds a large voice coil
while allowing the heat to be exchange through the
back pole piece and through the dual REZTx spiders.
H CAP
Injection molded two tone polypropylene dust cap
adds strength to the woofer and proudly.
SHALLOW SUBWOOFERS
Gloss Poly Cone
Heavy duty cones deliver deep bass with minimal cone flex.
Butyl Surround
Satin black linear Butyl rubber surround keeps the piston
motion of the subwoofer linear and smooth
Voice Coil & Former Assembly
Vented aluminum former holds a large voice coil while
allowing the heat to be exchanged.
Vented Frame
Additional venting on the rear of the subwoofer helps keep
air moving when minimal venting is available within the enclosure
BZE12D4
BZE12S4S
BRZ15D4
12"
12"
15"
RMS
300
150
150
MAXX
600
300
300
Impedance
Dual 4-Ohm
1 x 4 Ohm
1 x 4 Ohm
Cut-Out Ø
11.02”
11.1”
9.09”
Chassis depth from flange
5.79”
3.31”
3.23”
Model
Size
Power handling
Hifonics is launching Thor, a line of Powersports
products aimed at those customers that spend
more time outside than on the couch. They want
Hifonics power – outdoors!
FROM THE
GODS
The Hifonics Thor Powersports line is protected
against the elements, components are designed
to be easy for installation. The Bluetooth sound
bars, TPS10 and TPS6 will launch this spring for
customers that demand more.. more attitude and
more POWER!
Large Controls:
THOR
•Easy operation with riding gloves
•Power on/off
•Track Forward and Back >>I / I<<
•Volume up and down + & •Map/Reading light
•Bluetooth Jump
•Buttons and LED’s are all protected against the elements
•Heavy Impact Grill prevents damage to speakers
POWERSPORTS
Sound Bar Highlights:
• High Efficiency Drivers for bass and midrange
• Titanium Dome Tweeters with Neodymium Magnets
• Solid Extruded Aluminum Structure for secure mounting
• Hifonics Blue Illumination with on/off switch
Sound Bar Includes:
• Bluetooth Jump allows easy “jump” from one device to another
• Secure Simple Pairing keeps your BT connected and no one else
• IPX6/8 Certified for water, dust and wind.
• Audio In/Out will allow for a hard wired music player plus audio output to
drive external amplifiers
• 2 Volts output to drive additional components
• Switchable Illumination The Blue illumination can be switched on and off
• Two different sizes HPS6 or HPS10, integrate perfectly into SXS,
ORV machines or custom Sand Cars
• Built-in Map/Reading light
• Autoshut Off
TPS10 - Ten speaker Powersports Sound Bar
8 High Efficiency Drivers to
handle bass and midrange
Two 1” Pure Titanium Dome Tweeters
with Neodymium Magnets to handle
high frequencies
TPS6 - Six speaker Powersports Sound Bar
4 High Efficiency Drivers to
handle bass and midrange
Two 1” Pure Titanium Dome Tweeters
with Neodymium Magnets to handle
high frequencies
Mounting Hardware:
Included are the roll cage mounting
hardware for 1.5, 1.75 and 2 inch pipes plus
the surface Mounting Brackets when a roll
cage is not an option.
Hercules LTD 35th Anniversary
The 35 Year Anniversary
celebrations continue with the
Hercules LTD edition amplifiers.
The H35 line are available
exclusively from our online
partners.
Mega powerful transformers,
audiophile grade components,
military grade circuit boards
HERCULES Amplifiers Feature:
• Super D-Class™ Mono Blocks
• Super A/B Class™ Four Channel
• Ultra-Fi MOSFET Outputs
• Illumination
• Bass remotes included on mono amps
Twin turbo power supply
torroids in a PWM MOSFET
power supply design
Rock solid Ultra-Fi™
MOSFET outputs
Ultra-Fi™ MOSFET
Produces high power with minimal distortion
Low Noise Pre Amplifier
Maximum low voltage signal from the source
unit comes into the amplifier circuit with
minimal distortion
Nickel-plated RCA inputs
Nickel-Plated RCA jacks create the best
connection and resist corrosion
2 channel & bridged mono operation
Flexible installation allows this amplifier to run in
two-channel or bridged mono mode.
The Hercules 35th Anniversary line offers Super
A/B Class™ full range in a four channel amplifier and
Super D-Class™ technology in three options of mono
subwoofer amplifiers. This focused amplifier line
makes designing a Hercules system online easy.
Variable Electronic
Electronic crossovers allow for complete control
of the sound.
4-Way System Protection Circuitry
Monitor thermal, overload, DC, and speaker short
protection with lighted indicators on the amplifier
end panel
All mono amplifiers include a
bass remote to put the bass
control at arm’s length.
H35 1200.4
Specs
Output Power Watt
4-Ohms
4 x 75
2-Ohms
4 x 150
1-Ohm
Mono Bridged @ 2-Ohms
Stereo Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
45Hz Bass EQ
N/A
N/A
2 x 600
60Hz - 1.2KHz
30Hz -150Hz
0-9dB
H35 2400.1D
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Illumination
The new 35th Anniversary amplifiers feature
illuminated molded and angled Power/Ground and
Speaker terminals for stress free installation
H35 1700.1D
Specs
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
1 x 425
1 x 850
1 x 1700
35Hz-250Hz
15Hz-35Hz
0-9dB
Yes
Specs
H35 3000.1D
1 x 800
1 x 1400
1 x 2400
35Hz-250Hz
15Hz-35Hz
0-9dB
Yes
Output Power Watt
4-Ohms
2-Ohms
1-Ohm
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Specs
1 x 750
1 x 1500
1 x 3000
35Hz-250Hz
15Hz-35Hz
0-9dB
Yes
BRUTUS AMPLIFIERS
BRUTUS POWER
Brutus, or BRX as those close to the gods call it, is all Go & Show. If your
system is going to be shown at car shows and other competitions, take a
very close look at the Brutus BRX. Brutus BRX is packed with features
to enhance sound quality and power. There are 5 models of pure mono
power featuring Super D Class™ and a new 5 channel. That is 9 amplifiers
that can help you design a perfect system around Brutus power.
Super A/B Class™
Top quality 1% tolerance grade components. Super A/B Class™
insures the Hifonics full range amplifiers fill your needs for
high-power and ultra-high end sound.
Super D Class™
Utilizing 1% tolerance digital chip technology to provide an
extremely efficient, low temperature, high amplification system
Ultra-Fi™ MOSFET
Produces high power with minimal distortion
Variable Electronic
Electronic crossovers allow for complete control of the sound
High Grade Aluminum
Heavy duty aluminum alloy heat-sink allows amplifier to quickly
dissipate heat while producing maximum power
4-Way System Protection Circuitry
Monitor thermal, overload, DC, and speaker short protection with
lighted indicators on the amplifier end panel
Illuminated Logo
The Hifonics logo illuminates when the amplifier is powered, making
a #PowerFromTheGods statement in the dark
Accu-Cross™ crossovers and
adjustments for sound shaping
Ultra-Fi™ MOSFETS
All Mono and five channel amplifiers
include a bass remote to put the
bass control at arm’s length.
BRX316.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
N/A
4x80W
4x40W
N/A
2x160W
60Hz-1.3KHz
30Hz-250Hz
N/A
0-10dB
N/A
11 x 2.4 x 9.8”
BRX616.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
N/A
4x160W
4x80W
N/A
2x320W
60Hz-1.3KHz
30Hz-250Hz
N/A
0-10dB
N/A
14.7 x 2.4 x 9.8"
BRX1116.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x1100W
1x700W
1x400W
10Hz-50KHz
35Hz-250Hz
15Hz-35Hz
0-10dB
Yes
10.2 x 2.4 x 9.8”
BRX1516.1
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x1500W
1x900W
1x550W
10Hz-50KHz
35Hz-250Hz
15Hz-35Hz
0-10dB
Yes
“12.5 x 2.4 x 9.8”
BRX1616.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x400W
4x200W
N/A
2x800W
60Hz-1.3KHz
30Hz-250Hz
N/A
0-10dB
“17.7 x 2.4 x 9.8”
BRX2016.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Signal to Noise Ratio
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x2000W
1x1400W
1x700W
10Hz-50KHz
>95dB
35Hz-250Hz
15Hz-35Hz
0-10dB
Yes
“14.7 x 2.4 x 9.8”
BRX2416.1D
Specs
Output Power Watt
1x2400W
1-Ohm
1x1600W
2-Ohms
1x850W
4-Ohms
10Hz-50KHz
Frequency Response
35Hz-250Hz
Variable Low-Pass
15Hz-35Hz
Variable Subsonic Filter
0-10dB
45Hz Bass Boost
Yes
Remote Level Control
Dimensions (L x H x W) "14.9 x 2.4 x 9.8"
BRX3016.1D
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
BRX5016.5
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Frequency Response
Signal to Noise Ratio
THD %
Variable Hi-Pass
Specs
1x3000W
1x2000W
1x1000W
10Hz-50KHz
35Hz-250Hz
15Hz-35Hz
0-10dB
Yes
"17.7 x 2.4 x 9.8"
Specs
N/A
4x100W + 1x750W
4x60W + 1x475W
N/A
N/A
10Hz-50KHz
≥90dB
<0.05%
“CH1/2:50Hz-4KHz
CH3/4: 50Hz-250Hz”
“CH3/4: 150Hz-4KHz
Variable Low-Pass
CH5: 35Hz-150Hz”
15Hz-55Hz
Variable Subsonic Filter
0-18dB
45Hz Bass Boost
YES
Remote Level Control
“19.6 x 2.4 x 9.8”
Dimensions (L x H x W)
ZEUS AMPLIFIERS
ZEUS POWER
Hifonics Zeus amplifiers prove that #PowerFromTheGods is possible in any
system. New amplifiers with 2 and 4 channel configurations make it easy to power
your highs. But, with four new models of mono subwoofer amplifiers featuring
Class D power, your system will shake the foundation of Mt. Olympus. Mortals can
have a car audio system with 3200 watts at 1 ohm – Zeus ZRX is the answer.
Ultra-Fi™ MOSFETS
Accu-Cross™ crossovers and
adjustments for sound shaping
Class D
Four big mono amplifiers, utilizing Class D technology to
maximize power and efficiency
Class A/B
Designed to be high sound quality with minimal distortion
Ultra-Fi™ MOSFET
Produces high power with minimal distortion
Low Noise Pre Amplifier
Maximum low voltage signal from the source unit comes into the
amplifier circuit with minimal distortion
Nickel-plated RCA inputs
Nickel-Plated RCA jacks create best connection and resist corrosion
2 channel and bridged mono operation
Flexible installation allows this amplifier to run in
two-channel or bridged mono mode.
Variable Electronic
Electronic crossovers allow for complete control of the sound
High Grade Aluminum
Heavy duty aluminum alloy heat-sink allows amplifier to quickly
dissipate heat while producing maximum power
4-Way System Protection Circuitry
Monitor thermal, overload, DC, and speaker short protection with
lighted indicators on the amplifier end panel
Illuminated Logo
The Hifonics logo illuminates when the amplifier is powered, making a
#PowerFromTheGods statement in the dark
All Mono amplifiers include a bass
remote to put the bass control at
arm’s length.
ZRX516.2
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
2x250W
2x125W
N/A
1x500W
60Hz-1.2KHz
30Hz-250Hz
N/A
0~12dB
11.4” x 2.4” x 10”
ZRX616.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x150W
4x75W
N/A
2x300W
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
12.6” x 2.4” x 10”
ZRX1016.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
2x500W
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
15.7” x 2.4” x 10”
ZRX1216.1D
Specs
N/A
4x250W
4x125W
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x1200W
1x600W
1x400W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~12dB
Yes
12.6” x 2.4” x 10”
ZRX1216.2
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
2x600W
2x300W
N/A
1x1200W
60Hz-1.2KHz
30Hz-250Hz
N/A
0~12dB
19.7” x 2.4” x 10”
ZRX1816.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x1800W
1x900W
1x500W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~12dB
Yes
15.7” x 2.4” x 10”
ZRX2016.4
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Mono Bridged @ 2-Ohms
Mono Bridged @ 4-Ohms
Variable Hi-Pass
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Dimensions (L x H x W)
N/A
4x500W
4x250W
N/A
2x1000W
60Hz~1.2KHz
30Hz~250Hz
N/A
0~12dB
22.0” x 2.4” x 10”
ZRX2416.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x2400W
1x1200W
1x650W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~12dB
Yes
17.3” x 2.4” x 10”
ZRX3216.1D
Specs
Output Power Watt
1-Ohm
2-Ohms
4-Ohms
Frequency Response
Variable Low-Pass
Variable Subsonic Filter
45Hz Bass Boost
Remote Level Control
Dimensions (L x H x W)
1x3200W
1x1600W
1x800W
10Hz-300Hz
40Hz-300Hz
10Hz-40Hz
0~12dB
Yes
19.7” x 2.4” x 10”
Brutus Subwoofers
BRUTUS FORCE
Hifonics Brutus subwoofers are built for one purpose; Brute force power. These
subwoofers feature designs like a multi-layer voice coils and vented aluminum
formers for MAXX power handling.
Brutus subs are the definition of #PowerFromTheGods.
Take a look inside the Brutus BRX12D4 subwoofer on the next page and see
why the Brutus and other Hifonics subwoofers deliver huge bass, especially
when matched with a Hifonics amplifier.
BRX12D4
BRZ12SQD4
BRZ15D4
12"
12"
15"
450/900
600/1200
600/1200
Impedance
Dual 4-Ohm
Dual 4-Ohm
Dual 4-Ohm
Cut-Out Ø
10.94"
11.18"
13.86"
Chassis depth from flange
5.69"
6.4"
7.13"
Model
Size
Power RMS/MAXX
2
1
7
6
4
5
3
BRX12D4
1
Woven Pressed Polypropylene Cone
Heavy Duty woven texture polypropylene cone
develops big bass while dramatically reducing cone
flex which can rob the system of low deep bass
2
Butyl Surround
Satin black linear Butyl rubber surround along with the
REZTx spiders help keep the piston motion linear and
smooth
3
Voice Coil & Former Assembly
Vented aluminum former holds a 2.5” voice coil while
allowing the heat to be exchange through the equal
pressure venting system
4
Dual REZTx Spiders
Dual REZTx (Resin infused textile) spiders along with
the REZTx alignment collar, allow the Brutus woofer to
handle more power
5
56oz Motor
Double stacked high energy motor assembly with
56oz magnets increases power handling which
increases SPL – sound pressure level
6
P & I Terminals
Nickel-plated 8 gauge speaker terminals to secure
speaker wire connections easily
7
2XIL Ring
The 2XIL Ring is a heavy duty ABS trim ring with dual
illumination.
HERCULES SUBWOOFERS
Satin Black Polypropylene Cone
Heavy Duty injection molded polypropylene cone
adds strength
High SPL Rubber Surround
Satin black linear Butyl rubber surround along with
the Hercules spider helps keep the piston motion
linear and smoothe
Voice Coil & Former Assembly
Vented aluminum former holds the voice coil while
allowing the heat to be exchange through the back
pole piece and the Hercules balanced venting
system. Less heat means less distortion and
improved reliability
Cotton Spider
Specialized Hifonics cotton spider, along with the
Butyl surround, allows the Hercules keep the piston
motion of the subwoofer linear and smooth
Chromed & Booted
The HFX12D4 subwoofer is finshed in Chrome with
a tight fitting magnet boot to create a great look in
any install.
HERCULES POWER
The HFX12D4 is a Dual 4 ohm subwoofer which makes it very flexible
for system design and is ideal for a small vented or sealed enclosure.
The HFX subwoofer will deliver powerful bass. The subwoofer
features an injection polypropylene cone and a heavy duty High SPL
rubber surround to improved power handling.
The cone and surround assembly offers increased piston movement
for added performance, rigidity, and strong bass capabilities. The
subwoofer also features an integrated one-piece poly cotton spider
for controlling the liner (piston) movement, and high-temperature voice
coil and former for heat dissipation.
HFX12D4
Model
Size
Power handling
12"
RMS
MAXX
400
800
Impedance
Dual 4-Ohm
Cut-Out Ø
10.94"
Chassis depth from flange
5.61"
Hercules Speakers
The Hercules full range speakers all feature
Silk & Mylar Domed Tweeters
Heavy Duty injection molded polypropylene cone adds
strength
Phase Lens
The H-Stamp in silver holds a phase lens over the tweeter
which aides in creating a wider off-axis sweet spot
Surround
Butyl Rubber for improved sound quality and consistent
performance in temperature swings, especially colder climates
Cone
A Curvilinear woven glass cone is used which creates a
lightweight and rigid component, improving SPL with a wider
off-axis sweet spot
Voice Coil
Two layer copper windings for added heat dissipation and
reduced distortion. A lightweight Kapton former which helps
the voice coil move quickly and dissipate heat
Spider
Resin impregnated cotton spider with bumped design which
allows for more clearance and longer excursion
The HS6.2C component system also features
12dB Passive Crossover
Improved separation between tweeter and mid/woofer with
12dB per octave crossover network
Tweeter Mounting Hardware Included
Flush, Surface and Angle Mount Tweeter Cups are included to
make any installation application easy
Grills are included on the components, the 6.5 coax and 6x9” models
Model
Size / Type
Power handling RMS
MAXX
HS6.2C
HS693
6.5” component
6x9”
35
45
HS65CX
HS5768CX
HS46CX
6.5” 2-way coax 5x7” 2-way coax 4x6” 2-way coax
30
30
15
HS35CX
3.5” 2-way coax
10
70
90
60
60
30
20
Impedance
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
4 ohms
Sensitivity
85dB
90dB
86dB
88dB
85dB
82dB
Top Mount Depth
2.5”
3.4”
2.5”
2.5”
2”
1.7”
Signal Processors
Hifonics Digital Bass Restoration
The HDBR processor contains a Bass Driver circuit
that accurately recreates and injects Low Frequency
information back into the signal path. What that means
in everyday terms is that this Signal Processor will give
more bass impact to your best compact discs and even
your lowest quality recordings.
Dash Mount Remote Control
Our unit comes with a Dash Mountable Remote Control
that allows you to enjoy the effects of the processed
signal without having to leave the driver’s seat.
Bass Output Control
The HDBR has the ability to produce large amounts
of deep, ground shaking bass without damaging your
speakers. The Bass Output Control circuit allows
the Hifonics Digital Bass Restoration processor
to maxximize the bass output of any auto sound
audiosystem while restraining destructive bursts.
HIFONICS CROSSOVER WITH REMOTE
The HFXR is designed for complete control of crossover
and amplifier signal. If you are in the top tier of system
design the HFXR is a must. With an 8.5volt line driver, a
quasi-parametric EQ, 180 degree phase shift and discreet
level controls for front, rear and sub channels, this will be
one of the last components for your perfect system.
HIFONICS EQ - HFEQ
Quickly enhance any Hifonics installation with the
addition of the Hifonics ½ DIN Equalizer. Key features for
installation applications include four bands of EQ with
+18dB gain and a 9 volt line driver.
BXiPro 1.0 & BXiPro 2.0
Digital Bass Enhancement Processors
The BXiPRO processors contain a Bass Driver
circuit that an accurately recreates and injects Low
frequency information back into the signal path. The
BXiPro2.0 is a step up from the BXiPro1.0 adding the
features of a noise reduction circuit, a master volume
plus the illuminated controls.
POWER
FROM THE
GODS
SINCE 1981
THEN
Hifonics was there at the beginning
of car audio, developing technology,
engineering some of the loudest
cars on Earth.
NOW
om
plian
t
Amp
li
ard
er
r Pow Stand
fie
CTA-2006 C
Future
Spring 2016
THOR Powersports
Our 35 years of experience leading the car
audio industry delivers the all-new Super
Amps, three incredible amplifiers that are
CTA Certified RMS amplifiers including the
Colossus 35th Anniversary Dual Mono
Ultra D-Class delivering 3400 watts of
#PowerFromTheGods
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement