PENTAX Optio WG-1 GPS Digital Camera Quick Guide
Tangazo
Tangazo
OptioWG-1_QSG_ENG.book Page 0 Friday, March 11, 2011 8:59 AM
Thank you for purchasing this PENTAX digital camera.
The Optio WG-1 GPS / Optio WG-1 is waterproof, dustproof, and shockproof, as shown below, so you can use it in a wide range of outdoor activities.
Waterproof/dustproof: JIS grade 8 waterproof and grade 6 dustproof
(IP68)
Shockproof: Satisfies Pentax drop test (1.5 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-
Shock testing.
* Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or damage under every condition.
0
OptioWG-1_QSG_ENG.book Page 0 Friday, March 11, 2011 8:59 AM
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• A band of light may appear on the display if the camera is aimed at a bright subject. This is known as a smear, but it is not a malfunction.
• There is a possibility that the illustrations and the display screen in this manual are different from the actual product.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC
Memory Cards are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and accessories.
OptioWG-1_QSG_ENG.book Page 1 Friday, March 11, 2011 8:59 AM
USING YOUR CAMERA SAFELY
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.
Warning
Caution
This symbol indicates that violating this item could cause serious personal injuries.
This symbol indicates that violating this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages are present within the camera, and there is a danger of electric shock if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the battery or the AC adapter, and contact your nearest PENTAX Service Center. Continuing to use the product can cause a fire or electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.
• Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time.
1
OptioWG-1_QSG_ENG.book Page 2 Friday, March 11, 2011 8:59 AM
2
• Should the LCD be damaged, be careful of glass fragments.
Also, be careful not to allow the liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About the Battery Charger and the AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this product, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this product, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric shock.
• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue its use and consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electric shock.
• If water should happen to get inside the product, consult a PENTAX Service
Center. Continuing to use the product can cause a fire or electric shock.
• If a thunder storm should occur while using the battery charger or AC adapter, unplug the AC plug cord and discontinue use. Continuing to use the product can cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC plug cord if it becomes covered with dust.
Dust on the plug may cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a PENTAX
Service Center.
• Do not short or touch the output terminals of the product while it is still plugged in.
OptioWG-1_QSG_ENG.book Page 3 Friday, March 11, 2011 8:59 AM
• Do not plug in the AC plug cord with wet hands. This can cause an electric shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
• Do not use the battery charger to charge a battery other than a rechargeable lithium-ion battery D-LI92. This can cause overheating, explosion, or battery charger failure.
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may cause a loss of sight. Flush your eyes with clean water and get medical attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
3
4
OptioWG-1_QSG_ENG.book Page 4 Friday, March 11, 2011 8:59 AM
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and Accessories Out of the Reach of
Small Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small children.
1. Injuries may result from the product falling or from unexpected movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be swallowed. Seek medical attention immediately if an accessory is accidentally swallowed.
OptioWG-1_QSG_ENG.book Page 5 Friday, March 11, 2011 8:59 AM
Care to be Taken During Handling
Before Starting Use
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Battery Charger
• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.
If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord supplied with the camera is for exclusive use with the battery charger D-BC92. Do not use it with any other equipment.
Cautions when Carrying and Using the Camera
• Hot and humid places should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or pressure as this may cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the camera is subjected to substantial vibrations, shocks, or pressure, take your camera to your nearest PENTAX Service Center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C
(14°F to 104°F).
• The liquid crystal display will become black at high temperatures but will return to normal at normal temperatures.
5
6
OptioWG-1_QSG_ENG.book Page 6 Friday, March 11, 2011 8:59 AM
• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a malfunction.
• If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag and take the camera out when the difference in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.
• Please do not press forcefully on the display. This could cause it to break or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.
About Repairs
• Do not clean the product with organic solvents such as thinner, alcohol or benzene.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.
About Storage
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to prevent the camera from becoming moldy during storage.
OptioWG-1_QSG_ENG.book Page 7 Friday, March 11, 2011 8:59 AM
Others
• Periodic checks are recommended every 1 to 2 years in order to maintain high performance.
• Please note that deleting images, or formatting the SD Memory Cards or the built-in memory does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software.
It is the user’s responsibility to ensure the privacy of such data.
7
OptioWG-1_QSG_ENG.book Page 8 Friday, March 11, 2011 8:59 AM
Checking the Contents of the Package
Check that your camera comes complete with the items listed below.
P
Camera (Optio WG-1 GPS/
Optio WG-1)
P
Carabiner strap (O-ST117/
O-ST118)
P
Software (CD-ROM) S-SW117
P
USB cable (I-USB7)
Landscape 1 / 2
P
AV cable (I-AVC7)
P
Rechargeable lithium-ion battery
(D-LI92)
MENU Cancel OK OK
P
Battery charger (D-BC92)
P
AC plug cord
8
P
Strap (O-ST104)
P
Operating Manual
P
O
Macro stand (O-MS1)
Quick Guide (this guide)
P
Utilities Guide for GPS (WG-1 GPS only)
OptioWG-1_QSG_ENG.book Page 9 Friday, March 11, 2011 8:59 AM
Names of Parts and Monitor Indicators
Front
Shutter release button
Power switch/Power lamp (green)
Back
Flash
Lens
Speaker/Microphone
Remote control receiver
Self timer lamp/Focus assist
Macro light
Terminal cover
Terminal cover lock lever
Display
Tripod socket
Battery/card cover lock lever
Battery/card cover
In this Quick Guide, the arrow keys to be pressed are indicated as shown on the right.
4
Battery lock lever
HDMI terminal
PC/AV terminal
2
5
3
9
OptioWG-1_QSG_ENG.book Page 10 Friday, March 11, 2011 8:59 AM
10
z
Monitor Indicators
Following indicators are displayed in the still picture capture mode.
Normal display in the Still Picture Capture Mode
Drive mode
Flash mode
Shooting mode
Focus mode
P
Battery level
Face Detection
Date imprint setting
EV compensation
Shutter speed
Aperture
DATE
+1.0
1/250
F3.5
38
Camera shake reduction
Memory status
+ Built-in memory (without card)
?
SD Memory Card r Card is write-protected
Eye-Fi communication status
Digital zoom icon
Positioning status
Focus Frame
D-Range Setting
World Time setting
Remaining image storage capacity
Date and time
No icon : Hometown
: Destination
Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera turns off after this message appears.
OptioWG-1_QSG_ENG.book Page 11 Friday, March 11, 2011 8:59 AM
Preparing the Camera for Use
Prepare your camera for use before you begin using it.
z
Attaching the Carabiner Strap
Attach the carabiner strap supplied with the camera as shown in the illustration.
z
Installing the Battery and SD Memory Card
Install the battery and SD
Memory Card as shown in the illustration.
Battery/ card cover
Battery/card cover lock lever
SD Memory Card socket
SD Memory Card
Battery lock lever
Battery
* The SD Memory Card is sold separately.
The inside of the battery/card and terminal covers are not waterproof
• In locations where the camera is exposed to water or dirt such as underwater, at the beach, in a kitchen, etc., make sure that the battery/card and terminal cover lock levers are firmly locked so that they won't open unexpectedly. Do not open the covers in such locations.
• When removing the battery or card, avoid surroundings where the camera may be exposed to water or dirt, and make sure the camera, battery, card, and your hands are completely dry.
11
12
OptioWG-1_QSG_ENG.book Page 12 Friday, March 11, 2011 8:59 AM
Turning the Camera On
z
Press the Power Switch
The camera turns on and is ready to take still pictures. Press the power switch again to turn the camera off.
z
Make the Initial Settings
The [Language/ ] screen appears when the camera is turned on for the first time. Select the desired language and then set the date and time.
1
22
Use the four-way controller
(2345) to select the desired language.
Press the 4 button.
The [Initial Setting] screen appears.
MENU
Cancel
OK
OK
Memo
If you accidentally select the wrong language and press the 4 button, press the four-way controller (5), use the four-way controller (2345) to select the desired language, and then press the 4 button.
The [Initial Setting] screen appears in the selected language.
Initial Setting
English
Hometown
New York
Settings complete
MENU
Cancel
DST
OptioWG-1_QSG_ENG.book Page 13 Friday, March 11, 2011 8:59 AM
3
Press the four-way controller (3) to move the frame to
[W Hometown].
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel
4
Press the four-way controller (5).
The [W Hometown] screen appears.
Hometown
City
DST
MENU Cancel
New York
OK OK
5
6
7
8
9
Use the four-way controller (45) to choose the city.
Press the four-way controller (3) to move the frame to [DST]
(Daylight Saving Time).
Use the four-way controller (45) to select O or P and press the 4 button.
The [Initial Setting] screen reappears.
Press the four-way controller (3) to select [Settings complete] and press the 4 button.
The [Date Adjustment] screen appears.
Press the four-way controller (5) to select [mm/dd/yy], then use the four-way controller (23) to choose the date format.
Date Adjustment
Date Format
Date
Time mm/dd/yy 24h
01/01/2011
00:00
Settings complete
MENU Cancel
13
14
OptioWG-1_QSG_ENG.book Page 14 Friday, March 11, 2011 8:59 AM
10
Press the four-way controller (5) to select [24h], then use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
11
Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Date].
12
Press the four-way controller (5) to select [01] (month),
[01] (day) or [2011] (year), then use the four-way controller (23) to set the current date and time.
13
Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Time].
14
Press the four-way controller (3) to select [Settings complete] and press the 4 button.
Date Adjustment
Date Format
Date
Time mm/dd/yy 24h
01/01/2011
00:00
Settings complete
MENU
Cancel
OK
OK
OptioWG-1_QSG_ENG.book Page 15 Friday, March 11, 2011 8:59 AM
z
Formatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused or has been used on another camera or digital device.
Be aware that formatting will delete all the data stored in the SD Memory Card.
15
16
OptioWG-1_QSG_ENG.book Page 16 Friday, March 11, 2011 8:59 AM
Taking Pictures
Aim the camera at the subject, then press the shutter release button.
The flash discharges automatically depending on the brightness.
21
22
Frame the subject using the focus frame on the display.
Press the w/x button to change the captured area.
Widens the area that is captured by the camera
Enlarges the subject
23
24
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
The picture is taken.
1 / 2 5 0
F 4 . 6
3 8
OptioWG-1_QSG_ENG.book Page 17 Friday, March 11, 2011 8:59 AM
z
Selecting the Flash Mode
Each time you press the four-way controller (4), the flash mode switches between the following modes.
Auto
Flash Off
Flash On
Auto + Red-eye
Flash On + Red-eye
Memo
• The functions available in Capture mode may be different.
z
Selecting the Drive Mode
Each time you press the four-way controller (2), the drive mode switches between the following modes.
Standard (single-frame)
10 sec. Self-timer
3-sec Remote Control
17
18
OptioWG-1_QSG_ENG.book Page 18 Friday, March 11, 2011 8:59 AM
Memo
• The functions available in Capture mode may be different.
• You can select Z (2 sec. Self-timer) by pressing the four-way controller (3) and then (5) after selecting g (10 sec. Self-timer).
• You can select h (0-sec Remote Control) by pressing the four-way controller (3) and then (5) after selecting i (3-sec Remote
Control).
z
Selecting the Focus Mode
Each time you press the four-way controller (5), the focus mode switches between the following modes.
Standard
Macro
1cm Macro
Pan Focus
Infinity
Manual Focus
OptioWG-1_QSG_ENG.book Page 19 Friday, March 11, 2011 8:59 AM
Selecting a Shooting Mode
You can choose the right mode for your particular situation from the Capture Mode Palette.
Press the four-way controller (3).
Landscape 1 / 2
F o r c a p t u r i n g l a n d s c a p e v i e w s . E n h a n c e s c o l o r s o f s k y a n d f o l i a g e
MENU Cancel OK OK
Use the four-way controller
(2345) to choose a shooting mode, then press the 4 button.
Memo
An explanation appears when you select the shooting mode.
19
20
OptioWG-1_QSG_ENG.book Page 20 Friday, March 11, 2011 8:59 AM
z
The monitor display in 16:9 aspect ratio
When [Recorded Pixels] is set to i/ / /h in [A Rec. Mode], the aspect ratio of the image is 16:9 and the monitor display for recording and playback is as shown below.
P
OptioWG-1_QSG_ENG.book Page 21 Friday, March 11, 2011 8:59 AM
Playing Back Images
You can play back the images taken on the display.
z
Playing Back Images
1
Press the Q button after taking a picture.
The image appears on the display.
Edit
Memo
• To play back the previous or next image, press the four-way controller (45).
• Pressing f on the f/y button during playback displays
6 thumbnail images. Pressing f again in 6-image display switches to 12-image display. Pressing f yet again switches to folder or calendar display.
21
22
OptioWG-1_QSG_ENG.book Page 22 Friday, March 11, 2011 8:59 AM
z
Deleting Images
Deleting a Single Image
You can delete the currently displayed image.
1
Play back the image you want to delete.
2
3
Press the i button.
The confirmation screen appears.
Use the four-way controller (2) to select [Delete].
Delete
Cancel
4
Press the 4 button.
Memo
• You can delete several images selected from the 6- or 12-image display.
• You can delete all images at once.
• You can protect stored images from being accidentally deleted.
OptioWG-1_QSG_ENG.book Page 23 Friday, March 11, 2011 8:59 AM
Selecting a Playback Mode
You can choose the playback function you want to use with the Playback Mode Palette.
Press the four-way controller (3) while an image is displayed in playback mode.
Slideshow 1 / 2
F o r c o n t i n u o u s l y p l a y i n g b a c k i m a g e s . S c r e e n o r s o u n d e f f e c t s c a n b e s e t
MENU Cancel OK OK
Use the four-way controller
(2345) to choose a playback mode, then press the 4 button.
Memo
An explanation appears when you select the playback mode.
23
24
OptioWG-1_QSG_ENG.book Page 24 Friday, March 11, 2011 8:59 AM
For details about how to use the Optio WG-1 GPS / Optio WG-1 or instructions on connecting the camera to a computer, refer to the manual below.
Optio WG-1 GPS / Optio WG-1 Operating Manual
OptioWG-1_QSG_ENG.book Page 25 Friday, March 11, 2011 8:59 AM
Information for Users on Collection and Disposal of Old Equipment and Used
Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste.
Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments and batteries to designated collection facilities free of charge*.
In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product.
Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a designation for the chemical element or compound in use. In this case you have to comply with the requirement set by the Directive for the chemicals involved.
25
OptioWG-1_QSG_ENG.book Page 1 Friday, March 11, 2011 8:59 AM
HOYA CORPORATION
PENTAX Imaging Systems Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe Imaging Systems S.A.S.
(European Headquarters) 112 Quai de Bezons - BP 204,
95106 Argenteuil Cedex, FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX Imaging Systems GmbH
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(http://www.pentax.de)
PENTAX Imaging Systems Limited
PENTAX House, Heron Drive, Langley, Slough,
Berks SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
250 North 54th Street Chandler, AZ 85226, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA
(http://www.pentax.ca)
PENTAX Trading (SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn)
Specifications and external dimensions are subject to change without notice.
OPWG10171/ENG Copyright © HOYA CORPORATION 2011
FOM 01.03.2011 Printed in Europe
Pakua
Tangazo