advertisement
JKD910WBWW - GE Profile Performance
™
27” Warming Drawer
Warming Drawer Dimensions (in inches)
23-1/2" Min.
Inside Locate electrical outlet in
Adjacent
Cabinet
16" From
Left Side or 42"
From Right
Side.
25-1/2"
23"
24"
Recommended
From Floor
For Under
Countertop
Installation
9-1/4"
26-3/4"
10-1/2"
9
2x4 or 2x2 runners or Solid
Bottom
Install
2x4 or 2x2
Anti-Tip
Block 9"
From Floor to Bottom of Block
Under Oven Installation (in inches)
23-1/2" Min.
Inside
2" Min.
Between
Cutouts
Locate Electrical
Outlet in Adjacent
Cabinet no Further
Than 16" From
Left Side or 42"
From Right Side.
23"
10-1/2"
1" Min.
Above
Toekick or Adjust to Oven
Installation
Height
9-1/4"
25-1/2"
26-3/4"
Undercounter Installation (in inches)
Electrical
Electrical Outlet
Flush with Side of Cabinet.
Outlet 16" Max.
Electrical Outlet 42" Max.
From Right Side.
1-1/2" Cabinet Top
7" Max.
25"
From Left Side.
25-1/2"
2" Min.
9-1/4"
36"
Countertop
Height
Optional Accessories:
JXPN1–Optional Pan Set Accessory for
Warming Drawer.
Five commercial pans with lids (4” deep)
• One large pan (14 quarts)
• Two medium pans (6 quarts each)
• Two small pans (3 quarts each)
ZXD27B–1/4” wood panel trim kit
Important Installation Note:
Must provide anti-tip brace at the back of the cabinet and the top of the cutout.
Note: When installing warming drawer with a cooktop, allow a 2” minimum from cooktop burner box bottom to top of cut-out.
For answers to your Monogram, ®
GE Profile Performance Series, ™
GE Profile ™ or GE appliance questions, call
GE Answer Center ® service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Specification Revised 8/99
23-1/2"
Min.
JKD910WBWW - GE Profile Performance
™
27” Warming Drawer
Features and Benefits
• 1.67 cu. ft Capacity
• Variable Temperature Control - Proof(80) / Low(140) / Med(170) / High(210)
• Variable Humidity Control - Crisp to Moist
• Half Rack
• "On" Signal Light
• On/Off Rocker Switch
• Removable Stainless Steel Pan
• Full Extension Ball Bearing Glides
• Hidden Controls Provide Flush Installation Appearance
• Variable Installation Options
• Model JKD910WBWW - White on white
• Model JKD910BBBB - Black on black
• Model JKD910ABAA - Almond on almond
• Model JKD910SBSS - Stainless steel
• Model JKD910CBCC - Bisque
Specification Revised 8/99
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement