Sony DCR-PC330E Application Guide

Computer

Applications Guide

3-084-946-12(1)

Digital Video Camera Recorder

© 2003 Sony Corporation

2

Read this first

• For camera operations, read the separate

Camera Operations Guide supplied with your camcorder.

• If your camcorder is a MICROMV format model, read also the separate MovieShaker

Application Guide supplied with your camcorder.

On image capture/editor software

You can edit pictures recorded on a tape or

“Memory Stick” using the supplied CD-ROM

(image capture/editor software). The software used differs depending on the picture to be edited. See below.

This manual describes how to edit pictures with

ImageMixer and Image Transfer*. If your camcorder is a MICROMV format model, refer to the separate MovieShaker Application Guide supplied with your camcorder.

If your camcorder is a DV format model

• When editing pictures on a tape: ImageMixer

1)

• When editing pictures on a “Memory Stick”:

ImageMixer

1) 2)

If your camcorder is a MICROMV format model

• When editing pictures on a tape:

ImageMixer

1)

, MovieShaker

1)

• When editing pictures on a “Memory Stick”:

1)

ImageMixer

1) 2) for Windows computer

2) for Macintosh computer

* Use Image Transfer to copy still pictures from your camcorder to a computer (Windows computer only).

System requirements for using

ImageMixer Ver.1.5 for Sony

When viewing pictures recorded on a tape on a computer

b

Note

• When you connect your camcorder to a Macintosh computer using a USB cable, you cannot view pictures recorded on a tape on the computer screen.

• OS: Microsoft Windows 98SE, Windows

2000 Professional, Windows Millennium

Edition, Windows XP Home Edition or

Windows XP Professional

Standard installation is required.

Operation is not assured if the above OS has been upgraded.

You cannot hear sound if your computer is running Windows 98. You can only transfer and view still images.

• CPU: Intel Pentium III 500 MHz or faster

(800 MHz or faster recommended)

• Application: DirectX 8.0a or later (This product is based on DirectX technology. It is necessary to have DirectX installed.)

• Sound system: 16 bit stereo sound card and stereo speakers

• Memory: 64 MB or more

• Hard disk:

Available memory required for installation:

250 MB or more

Available free hard disk space recommended:

1 GB or more (depending on the size of the image files edited)

• Display: 4 MB VRAM video card, Minimum

800 × 600 dots, High color (16 bit color,

65 000 colors), DirectDraw display driver capability (this product will not operate correctly at 800 × 600 dots or less, and 256 colors or less.)

• Others: USB port (this must be provided as standard), DV Interface (to connect via an i.LINK cable, DV format models only), disc drive (you need a CD-R drive to create a

Video CD.)

When playing pictures recorded on a

“Memory Stick” on a computer

Windows

• OS: Microsoft Windows 98, Windows 98SE,

Windows 2000 Professional, Windows

Millennium Edition, Windows XP Home

Edition or Windows XP Professional


Operation is not assured if the above OS has been upgraded.

• CPU: MMX Pentium 200 MHz or faster

• Application: Windows Media Player (this must be installed to play back movies.)

• Others: USB port (this must be provided as standard), disc drive

Macintosh

• OS: Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS

X (v10.0/v10.1/v10.2)


However, note that the computer should be updated to Mac OS 9.0/9.1/9.2 if it is an iBook, a Power Mac G4, or an iMac with a slot loading type disc drive, with the Mac

OS 8.6 standard installation.

• Application: QuickTime 3.0 or later (this must be installed to play back movies.)

• Others: USB port (this must be provided as standard), disc drive

About this manual

The screens shown in this manual are from a

Windows 2000 computer. The screens may vary depending on the OS.

On trademarks

• “Memory Stick” and are registered trademarks of Sony Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation in the

United States and/or other countries.

• Windows Media is a trademark of Microsoft

Corporation.

• Macintosh, iMac, Mac OS, iBook and Power

Mac are trademarks of Apple Computer, Inc.

• QuickTime and the QuickTime logo are trademarks of Apple Computer, Inc.

• Pentium is a trademark or registered trademark of Intel Corporation.

All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, “ and “



”



” are not mentioned in each case in this manual.

3

4

Table of Contents

Read this first ............................................................................................. 2

Connecting to a Windows computer

Introduction to editing pictures on a computer ........................................... 6

Features ...................................................................................................................... 6

Overview of the preparation ........................................................................................ 7

Step 1: Installing the USB driver on a computer ........................................ 8

Step 2: Installing the image editor software

(ImageMixer Ver.1.5 for Sony) .............................................................. 9

Step 3: Installing the image exchange software (Image Transfer)........... 11

Step 4: Connecting your camcorder to a computer.................................. 13

Connecting with the USB cable (supplied) ................................................................ 14

Connecting with an i.LINK cable (optional) (DV format models only) ........................ 16

Step 5: Checking the connection ............................................................. 17

Playing pictures recorded on a tape on your computer ............................................. 17

Viewing pictures recorded on a “Memory Stick” on your computer ........................... 18

Managing pictures on a Windows computer

Copying and viewing pictures recorded on a tape ................................... 19

Copying movies onto your computer ......................................................................... 19

Copying still images extracted from a movie on your computer ................................ 21

Editing pictures on your computer ............................................................................. 21

Viewing pictures on your computer via the USB port — USB Streaming .................. 23

Creating Video CDs ................................................................................. 24

Copying and viewing pictures recorded on a “Memory Stick” .................. 26

Editing still images on your computer ........................................................................ 28

Copying pictures edited on ImageMixer Ver.1.5 for Sony to a “Memory Stick” ......... 29

Connecting to a Macintosh computer (“Memory

Stick” only)

Step 1: Installing the USB driver on a computer ...................................... 31

Step 2: Connecting your camcorder to a computer.................................. 32

Copying pictures recorded on a “Memory Stick” ...................................... 33

Other functions

Creating DVDs (on Sony VAIO series computers only) ........................... 34

Connecting an analog VCR to the computer via your camcorder

(DV format models only) —

Digital convert function ........................... 37

Additional information

Troubleshooting ....................................................................................... 40

Index ........................................................................................................ 46

5

Connecting to a Windows computer

Introduction to editing pictures on a computer

Features

You can copy movies and still images recorded on your camcorder as digital data to your computer.

The copied pictures can be edited to your preference.

Create your own original video

You can superimpose a title, cut out scenes, and re-arrange the order on the movies that you have recorded on a tape or a “Memory Stick.” You can also create Video CDs.

Edit still images

You can add digital effects or superimpose words and illustrations on still images stored in a “Memory Stick” or extracted from movies recorded on a tape or a “Memory Stick.” You can create original posters, post cards, etc.

Distribute movies over the Internet via your computer (USB Streaming)

You can distribute movies live on the Internet using your computer without storing data on your hard disk.

6

Connecting to a Windows computer

Overview of the preparation

Follow the steps below to complete the preparation.

On your computer (for the first time only)

* Install these items from the CD-ROM “SPVD-010 USB Driver” supplied with your camcorder.

Step 1: Install the USB driver on your computer.

*

Step 2: Install the image editor software

(ImageMixer).

*

Step 3: Install the image exchange software (Image

Transfer).

*

CD-ROM (supplied)

On your camcorder

Step 4: Connect your camcorder to a computer.

Step 5: Check the connection between the camcorder and the computer.

There are two ways to connect your camcorder to a computer.

• Connecting with a USB cable (supplied)

• Connecting with an i.LINK cable (optional)

See “Step 4: Connecting your camcorder to a computer” (p. 13) for details.

Now, start from Step1 !

,

continued


7

If the screen does not appear

Step 1: Installing the

USB driver on a computer

You need to install the USB driver on your computer to connect your camcorder via a

USB cable (supplied). The installation is required only for the first time. From the second time on, you only need to connect the

USB cable.

To transfer pictures with more precision, use an i.LINK cable (optional) instead of the

USB cable (DV format models only).

In that case, operations in Step 1 are not necessary.

For Windows 2000/Windows XP

Log on as Administrators.

b

Note

• Do not connect the USB cable (supplied) before installing the driver.

1

Start up the computer.

Close down all applications running on the computer before installing the USB driver.

2

Place the supplied CD-ROM in the disc drive of your computer.

The application software starts up.

1

Double-click [My Computer].

2

Double-click [ImageMixer] (Disc drive)*.

* Drive names (such as (E:)) may vary depending on the computer.

3

Click [Handycam].

4

Click [USB Driver].

5

Click [Next].

8


6

Follow the on-screen instructions.

Read [Note on installing the USB driver], then click [Next].

The driver installation starts.


If a dialog box urging you to check the digital signature appears, click [Yes] or

[Continue Anyway].

Example: for Windows XP

7

Make sure [Yes, I want to restart my computer now.] is checked, then click

[Finish].

The computer turns off once, then starts up again automatically (Restart).

8

Remove the CD-ROM from the disc drive of your computer.

Step 2: Installing the image editor software

(ImageMixer Ver.1.5 for Sony)

If you have any questions about

ImageMixer Ver.1.5 for Sony

ImageMixer Ver.1.5 for Sony is a product of

PIXELA Corporation. For details, refer to the operating instructions on the CD-ROM supplied with your camcorder.



1




1


2



,

continued


9

2


• Read the [Readme.txt] file (Memo Pad) when it appears, then click (Close) to close Memo

Pad.

7

Click [Finish].

3

Click [ImageMixer].

4

Select the language for the installation, then click [OK].

5

Click [Next].

The installation of ImageMixer is complete.

8

Click [OK], then install WINASPI* following the on-screen instructions.

* You need this software to copy the pictures edited on your computer to a CD-R.

9

Click [End].

The installation for WINASPI is complete.

If DirectX 8.0a or a later version is not installed on your computer

Go on to step 10 to install DirectX 8.0a.

If Windows XP, or DirectX 8.0a or a later version is installed on your computer

When [InstallShield Wizard Complete] is displayed on the screen, click [Finish], then

[OK].

The computer restarts automatically. Then, remove the CD-ROM. (You can skip the rest of the procedure.)

10

Click [OK] to continue the installation of DirectX 8.0a.

1

Read [License Agreement], then click

[Yes].

2

Click [Install DirectX] (or [ReInstall]).

6


z

Tips

• If you use this software personally, enter

[Personal] etc. for [Company Name].

10


3

Click [OK].

The computer restarts automatically, then a short-cut icon for ImageMixer Ver.1.5 for

Sony appears on the desktop.

11


Step 3: Installing the image exchange software (Image

Transfer)



1




1


2



2


,

continued


11

3

Click [Image Transfer].

4

Select the language for the installation, then click [OK].

8

Click [Finish] to complete the installation of Image Transfer.

5

Click [Next].

6


Make sure [Image Transfer] is indicated on the program folder, then click [Next].

Normally, a new program folder [Image

Transfer] will be created.

7

Make sure that [YES] is checked for

[Launch Image Transfer automatically when the camera, etc., is connected.], then click [Next].

12


The installation screen is closed.

Short-cut icons for Image Transfer and the

Image Transfer folder appear on the desktop.

9


Step 4: Connecting your camcorder to a computer

On connection

There are two ways to connect your camcorder to a computer.

Connecting with a USB cable (supplied)

(p. 14)

• This method is good for copying files from a

“Memory Stick” to a computer for editing, and copying files to a “Memory Stick.”

• You can view the image that your camcorder is seeing on a computer, or play back pictures and sound recorded on a tape and view them on a computer. (PC Camera, Video

Streaming)

• You need to install the USB driver on your

computer beforehand (p. 8).

Connecting with an i.LINK cable

(optional) (p. 16)

• This method is good for copying and editing pictures and sound recorded on a tape.

• Image data is transferred with more precision than with a USB cable.

• You cannot copy files from a “Memory Stick” to a computer or copy files from a computer to a “Memory Stick” in your camcorder.

b

Note

• When you are using a USB cable or an i.LINK cable to connect your camcorder to a computer, make sure you insert the connector in the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder.

To copy and edit pictures recorded on a tape

If your computer has a USB jack

,Connect your camcorder to your computer using the supplied USB cable. See

“Connecting with the USB cable (supplied)”

(p. 14).

If your computer has an i.LINK

(IEEE1394) connector

,Connect your camcorder to your computer using an optional i.LINK cable. See

“Connecting with an i.LINK cable

(optional) (DV format models only)”

(p. 16). Image data are transferred with more

precision, and the installation of the USB driver is not required with this type of connection.

If your camcorder is a MICROMV format model, refer also to the separate

MovieShaker Application Guide supplied with your camcorder.

To copy and edit pictures recorded on a

“Memory Stick”

If your computer has a USB jack

,Connect your camcorder to your computer using the supplied USB cable. See

“Connecting with the USB cable (supplied)”

(p. 14).

If your computer has a Memory Stick slot

,Copy still images or movies to a “Memory

Stick,” then insert it into the Memory Stick slot on your computer. To check where the

images are stored on a “Memory Stick,” see page 27.

,

continued


13

Connecting with the USB cable

(supplied)

When connecting your camcorder to your computer with the USB cable (supplied), you must have the proper USB driver installed on

your computer (p. 8) before following the

steps below.

CAMERA], then touch to select [USB

STREAM].

For details on using the personal menu, refer to the separate Camera Operations

Guide supplied with your camcorder.

4

Connect the USB cable (supplied) to the USB jack on the camcorder.

to USB jack

USB cable

(supplied) to USB jack b

Note

• Do not connect your camcorder to the computer at this point.

1


Close down all applications running on the computer.



2

Prepare the power source for your camcorder, then slide the POWER switch to select the CAMERA-TAPE mode.

Use the supplied AC Adaptor as the power source. For details, refer to the separate


3

Touch [P-MENU], [MENU], [

(STANDARD SET)] and [USB-

Fully insert.

The location of the USB jack varies depending on the model. Refer to the separate Camera Operations Guide supplied with your camcorder for the location.

For the model that is supplied with the

Handycam Station, connect the USB cable to the USB jack on the Handycam Station, then set the USB ON/OFF switch to ON.

5

Connect the other end of the USB cable to the USB jack on your computer.

It may take some time for the computer to recognize the camcorder when you connect the USB cable for the first time.

For Windows XP

If [Found New Hardware Wizard] appears, click [Continue Anyway] and complete the installation.

6

Turn off the power of your camcorder.

7

Disconnect the USB cable from your camcorder.

8

Insert a recorded “Memory Stick” into your camcorder.

9

Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

14


10


(STANDARD SET)] and [USB-PLY/

EDT], then touch to select [STD-USB].

11

Connect your camcorder to the

computer via the USB cable (p. 14).

[USB MODE] appears on the LCD screen of your camcorder and the computer starts to recognize the camcorder.

It may take some time for the computer to recognize the camcorder when you connect the USB cable for the first time.

For Windows XP

If [Found New Hardware Wizard] appears, click [Continue Anyway] and complete the installation.

To disconnect the USB cable

For Windows 2000/Windows Me/

Windows XP

If [USB MODE] appears on the LCD screen, follow the procedure below to disconnect the

USB cable.

1

Click the [Unplug or eject hardware] icon on the task tray.

Click this icon.

3

Click [OK].

4

Disconnect the USB cable from the camcorder and computer.

If [USB MODE] does not appear on the LCD screen, do only step 4 above.

For Windows 98/Windows 98SE

Do only step 4 above.

Recommended connection

Connect as shown in the following illustrations to operate the camcorder correctly.

• Connect the camcorder to a computer via the

USB cable (supplied). Make sure no other

USB devices are connected to the computer.

task tray

2

Click [Unplug or eject hardware]

([Safely remove Sony Camcorder] in

Windows XP).

Click here.

,

continued


15

• If your computer has a USB keyboard and a

USB mouse as standard equipment, leave them connected and connect the camcorder to an available USB jack with the USB cable

(supplied).

The location of the DV Interface varies depending on the model. Refer to the separate

Camera Operations Guide supplied with your camcorder for the location.

To disconnect the i.LINK cable

Turn off the power of the camcorder and disconnect the i.LINK cable from the camcorder and computer.

z

Tip

• You can use other image editing software that can read video signals to edit the recorded pictures. For details on the operation of other software, refer to the help files or the operating instructions of that software.

b

Notes

• Operation is not guaranteed if you connect two or more USB devices to the computer.

• Operation is not guaranteed if you connect the USB cable to the USB jack on a keyboard or USB hub.

Make sure to connect the cable to the USB jack on the computer.

• Operation is not guaranteed on all the recommended environments.

Connecting with an i.LINK cable

(optional) (DV format models only)

to i.LINK (IEEE1394) connector i.LINK cable

(optional)

Interface

16


Step 5: Checking the connection

Playing pictures recorded on a tape on your computer

via an i.LINK cable (DV format models only).

Before following the procedure below, start up ImageMixer Ver.1.5 for Sony and check the connection.

b

Note

• Before following the procedure below, make sure you remove the “Memory Stick” from the camcorder.

1

Double-click [ImageMixer Ver.1.5 for

Sony] on the desktop.

2

Click (Capture Environment).

4

Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/

EDIT mode.

Use the supplied AC Adaptor as the power source.

For details, refer to the separate Camera

Operations Guide supplied with your camcorder.

5



EDT], then touch to select [USB

STREAM].



This operation is not necessary when connecting the camcorder to the computer

via an i.LINK cable (p. 16).

6


computer (p. 13).

3

Click (USB Device Capture

Mode) if you are connecting via a USB cable, or click (DV Camcorder

Capture Mode) if you are connecting

,

continued


17

7

Click (Playback) to see if the picture appears on the preview screen on your computer.

Preview screen



4


computer (p. 13), then see if Image

Transfer starts up automatically.

[USB MODE] appears on the LCD screen and the pictures stored in the “Memory

Stick” are copied to the computer. Then,

ImageMixer Ver.1.5 for Sony starts up automatically and a list of pictures appears

(p. 26).

It may take some time before it is displayed.

If the playback picture does not appear on the screen

Check to see if the USB driver is correctly

installed on your computer (p. 41).

If Image Transfer does not start

See “Troubleshooting” (p. 44) for details.

To cancel the operation

1

Click (Close) at the upper right- hand corner of the screen on your computer to quit ImageMixer Ver.1.5 for

Sony.

2

Turn off the camcorder, then disconnect the cable.

Viewing pictures recorded on a

“Memory Stick” on your computer

1

Insert the “Memory Stick” into your camcorder.

2


EDIT mode.

3




18


Managing pictures on a Windows computer

Copying and viewing pictures recorded on a tape

You can play or edit pictures on your computer without connecting the camcorder each time, by copying the pictures recorded on your tape to the computer.

If your camcorder is a MICROMV format model, you can also edit the pictures with the supplied CD-ROM (MovieShaker Ver.3.1 for MICROMV). For details, refer also to the separate MovieShaker Application Guide supplied with your camcorder.



2

Start up the computer, then doubleclick [ImageMixer Ver.1.5 for Sony] on the desktop.

3

Click

4


Mode) if you are connecting via a USB cable, or click (DV Camcorder

Capture Mode) if you are connecting via an i.LINK cable (DV format models only).

Copying movies onto your computer

Before following the procedures below, make sure you have installed ImageMixer

Ver.1.5 for Sony on your computer.

The maximum length of movies you can copy on a computer varies from 10 to 20 minutes, depending on the computer environment.

1

Prepare the power source for your camcorder, then insert a cassette into your camcorder.

5

On your camcorder, slide the POWER switch repeatedly to select the PLAY/

EDIT mode.

,

continued

Managing pictures on a Windows computer

19

6




STREAM].



This operation is not necessary when connecting the camcorder to the computer

via an i.LINK cable (p. 16).

7


computer (p. 13).

8

Click

Capture).

(Motion Picture

10

Click (Playback) to play back the tape.

11

Click (Capture) at the point you want to start copying.

9

Click to select an album to copy the picture to.

(red) turns to (black).

12

Click (Stop) at the point you want to stop copying.

20

Managing pictures on a Windows computer b

Note

• (forward one frame at a time) and

(rewind one frame at a time) only function on the

DV format models. (These buttons do not appear on other models.)

z

Tip

• When you copy a movie longer than the maximum recording time allowed (10 to 20 minutes), the playback stops automatically and the scenes up to that point will be copied to the computer.

Copying still images extracted from a movie on your computer

1

Follow steps 1 to 7 on “Copying movies onto your computer” (p. 19).

2

Click (Still Picture Capture).

Editing pictures on your computer

You can put together multiple pictures copied onto your computer and create one movie.

Refer to the on-line help for details on this

operation (p. 22).

1


2

Click

Environment).

3

Follow steps 9 and 10 on “Copying

movies onto your computer” (p. 20).

4

Click (Capture) at the point where you want to extract a still image from the movie.

3

Click (Movie Display). Select a movie from the list, then drag and drop it on the storyboard.

Storyboard

,

continued


21

4

Click [OK].

To play back the movie while editing

— Preview

Follow the steps below to play back the movie while editing. It may take some time for the preview picture to be displayed.

1

Click the desired size to change the image size.

5

Select a movie from the list, then drag and drop it on the storyboard repeatedly to sort the order of the images used in the movie.

6

Click

7

Name and save the movie in [My

Documents].

2

1

Click (Preview Mode).

2

Click

To play back the edited movie

In the [My Documents] folder, double-click the icon of the movie you created.

Windows Media Player* starts up, and the playback starts.

* You need Windows Media Player installed on your computer to play back the movie you created

(MPEG-format movie file).

b

Note

• The picture may flicker when you view it on a computer.

To use the on-line help

Refer to the on-line help for detailed operating instructions for ImageMixer Ver.1.5 for Sony.

1

Click (Help) at the upper right-hand corner of the screen.

2

Search for the desired topic from the table of contents.

To close the on-line help, click (Close) at the upper right-hand corner of the Help screen.

The created movie is also added to the current album.

22


Viewing pictures on your computer via the USB port — USB

Streaming

When you connect your camcorder to a computer via a USB cable (supplied), you can view a movie played on your camcorder on the computer screen. You do not need to store the data on the computer.

By using communication software, you can connect your computer to the Internet to distribute the picture live via the Internet.

Before following the procedures below, make sure you have installed ImageMixer

Ver.1.5 for Sony on your computer (p. 9).

Video Streaming

You can play a movie recorded on a tape on your camcorder and view it on the computer screen.

PC Camera

You can view the image that your camcorder is currently seeing.

1


2


3


Mode).

4


EDIT mode (for Video Streaming) or

CAMERA-TAPE mode (for the PC

Camera function).


5

For Video Streaming, touch [P-

MENU], [MENU], [



STREAM].

For the PC Camera function, touch [P-

MENU], [MENU], [

(STANDARD SET)] and [USB-

CAMERA], then touch to select [USB

STREAM].



6

Connect your camcorder to the computer via the USB cable (supplied)

(p. 14).

,

continued


23

7

For Video Streaming, click

(Motion Picture Capture), then click

(Playback).

Creating Video CDs

You can create Video CDs using a computer equipped with a disc drive.

The following procedure describes how to create a Video CD from a picture recorded on a tape (maximum length of about one hour).

You can also create a Video CD from the images that your camcorder is currently seeing.

Before starting the operation, make sure you have installed ImageMixer Ver.1.5 for Sony

on your computer (p. 9).

z

Tip

• To create a Video CD from pictures edited on a computer, start up ImageMixer Ver.1.5 for Sony, then click (Video Disc Environment). Refer to

the on-line help for details on this operation (p. 22).

1


2

Click (EZ VIDEO CD).

24


3


EDIT mode.


4




STREAM].



5

Search for the point on the tape where you want to start copying to the Video

CD.

z

Tip

• You can also create a Video CD of the image that the camcorder is currently seeing when the

POWER switch is set to the CAMERA-TAPE mode. Touch [P-MENU], [MENU] and [USB-

CAMERA], then touch to select [USB

STREAM].

6

Connect the camcorder to a computer

via the USB cable (supplied) (p. 14).

7

Place a new CD-R in the disc drive.

You cannot use a CD-RW.

8

Click [Start].

The tape starts playing and the picture is imported to the buffer via the HDD before being written onto the CD-R automatically.

To cancel the operation, click [Stop]. In this case, the picture played up to that point is written on the CD-R.

9

Click [Quit] after writing is finished.

To create another Video CD of the same content, place a new CD-R in the disc drive, then click [Start].

b

Notes

• Do not press any buttons on the camcorder while creating a Video CD.

• Select a hard disk that has enough space (more than about 6GB) for the [Location of work folder] on the

[Option] screen.

• Once you have created a Video CD, you cannot add images to the same CD-R.

• There may be a few second-break about every 10 minutes on the created Video CD. This is due to the

AVI format used to create the Video CD, which divides a picture every 10 minutes (about 4GB) to write it on a CD-R.

• The picture being written onto the CD-R will not appear on the computer screen.

z

Tip

• The importing of the picture stops automatically when the tape is played to the end.

To play the Video CD

You can play back the Video CD in one of the following devices. Refer to the operating instructions supplied with each player for details.

– DVD player

– a computer equipped with a DVD drive and software compatible with Video CDs

– a computer equipped with Windows Media

Player (You may not be able to play back the

Video CD depending on the computer environment, including such factors as the operating system or the hardware. The menu functions of Windows Media Player do not work.)

,

continued


25

The following procedure describes how to play back a Video CD using Windows Media Player.

1

Place a Video CD in the disc drive of your computer and start up Windows Media

Player.

For Windows XP

Click [Start], [All Programs],

[Accessories], [Entertainment], then

[Windows Media Player].

For other operating systems

Click [Start], [Programs], [Accessories],

[Entertainment], then [Windows Media

Player].

2

Open [My Computer], [CD-R], then

[MPEGAV]. Then, drag and drop the

movie file [sss*.DAT] onto the

Windows Media Player screen.

* sss indicates the actual file name.

Copying and viewing pictures recorded on a “Memory Stick”

You can play or edit pictures without connecting the computer to your camcorder by copying the pictures recorded on a

“Memory Stick” to the computer.

Before starting the operation, make sure you have installed Image Transfer on your

computer (p. 11).



b

Notes

• Use the supplied AC Adaptor as the power source, since the data on the “Memory Stick” may be destroyed if the power runs out during the operation.

• For details on the “Memory Stick” that you can use with the camcorder, refer to the separate Camera


26


1

Insert a “Memory Stick” into your camcorder.

2

Start up the computer, prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/EDIT mode.

3




4

Connect the camcorder to the computer via the USB cable (supplied)

(p. 14).

Image Transfer starts up automatically and the pictures recorded on the “Memory

Stick” are transferred to the computer.

Normally, the [Image Transfer] and [Date] folders are created inside the [My

Documents] folder, and all the pictures are stored in those folders.

When the image transfer is complete,

ImageMixer starts up automatically and displays a list of pictures.

4

Deactivate the setting.

A

B

DE

C

For Windows XP

The automatic playback wizard starts up at the default setting. Follow the steps below to deactivate this setting. (From the second time on, you can skip the rest of the procedure.)

1

Make sure you have connected your camcorder to a computer via a USB cable.

2

Click [Start], then select [My Computer] from the start menu.

3

Right-click [Sony MemoryStick], then click [Properties].

C

F

A Click the [Auto Play] tab.

B Select [Pictures] for a content type.

C Select [Actions], check [Select an action to perform], then select [Take no action]. Click [Apply].

D Select [Video Files] for a content type.

Repeat step 3.

E Select [Mixed content] for a content type. Repeat step 3.

F Click [OK].

To change the Image Transfer settings

Right-click (Image Transfer icon) on the task tray. Then, select [Open settings] to change

[Basic], [Copy], and [Delete].

Click [Restore defaults] to return to the default setting.

On destination folders and file names

Pictures transferred to the computer using Image Transfer

The pictures are copied to the [Image Transfer] and [Date] folders created inside the [My

Documents] folder.

,

continued


27

Pictures on a “Memory Stick”

The pictures are stored in the [Removable disk] or [Sony MemoryStick] folder displayed in [My

Computer].

Editing still images on your computer

You can edit the still images copied from your camcorder using ImageMixer Ver.1.5 for Sony and save them on your computer.

1


1

2

3

A Folder containing image files recorded

using other camcorders without the folder creation function (for playback only)

B Folder containing image files recorded

with your camcorder

When no new folders have been created, only [101MSDCF] is displayed.

C Folder containing movie data recorded

using other camcorders without the folder creation function (for playback only)

Folder

101 MSDCF

(up to 999

MSDCF)

File

DSCssss s.JPG

Meaning

Still image file

MOVsss ss.MPG

Movie file sssss stands for any number between 00001 to

99999.

To copy pictures on the computer without using Image Transfer

Double-click the [Removable disk] or [Sony

MemoryStick] icon displayed in [My

Computer]. Then, drag and drop a picture in the folder onto the hard disk drive of your computer.

2

Click

3

Click the still image that you want to edit, then click (Edit).

Click and select an image.

28


4

Click (Exit) after you finish editing.

Click.



4


The edited still image is added to the album.

z

Tip

• Refer to the on-line help for detailed operating instructions on ImageMixer Ver.1.5 for Sony

(p. 22).

Copying pictures edited on

ImageMixer Ver.1.5 for Sony to a


You can copy pictures edited on ImageMixer

Ver.1.5 for Sony to a “Memory Stick,” and use them as materials for MEMORY MIX on your camcorder.

Refer to the separate Camera Operations

Guide supplied with your camcorder for details on MEMORY MIX.

1

Insert a “Memory Stick” into your camcorder.

2


EDIT mode.

3




5

Click

6

Connect your camcorder to the computer via the USB cable (supplied)

(p. 14).

Click [Cancel] if Image Transfer starts up automatically.

7

Click the [MEMORY MIX] album.

,

continued


29

8

Right-click the picture that you want to copy, then click [Output to memory card].

1

2

1

Right-click the desired picture.

2

Click [Output to memory card].

9

Click (“Memory Stick” Select) on the title screen, then click

(Output) displayed at the bottom right-hand corner of the screen.

1

3 2

1

Click (“Memory Stick” Select).

2

Click

3

Click (Refresh) to confirm the picture that you have copied to the

“Memory Stick.”

The picture will be copied to the folder selected as a destination folder. For details, refer to the separate Camera


30


Connecting to a Macintosh computer

(“Memory Stick” only)

Step 1: Installing the

USB driver on a computer

The installation of the USB driver is not required for Mac OS 9.1/9.2 or Mac OS X

(v10.0/v10.1/v10.2). Skip this section and go

on to “Step 2: Connecting your camcorder to a computer” (p. 32).

1


2

Place the supplied CD-ROM in the disc drive of the computer.

A screen for selecting model names appears after a while.

3


4

Click [USB Driver].

5

Double-click the icon of the hard disk drive which stores the operating system. Then, double-click the [System

Folder] icon.

6

Drag and drop the [Sony Camcorder

USB Driver] file and [Sony Camcorder

USB Shim] file to [System Folder].

Drag and drop

7

When a message appears, click [OK].

The USB driver is installed on the computer.

8

Close the [USB Driver] screen, and eject the CD-ROM from the computer.

9

Restart the computer.

[USB Driver] folder [System Folder]

Connecting to a Macintosh computer (“Memory Stick” only)

31

Step 2: Connecting your camcorder to a computer

You must have the USB driver installed on your computer before starting the following

operation (p. 31). However, the installation is

not required for Mac OS 9.1/9.2 or Mac OS

X (v10.0/v10.1/v10.2).

1

Insert the “Memory Stick” into your camcorder.

2


EDIT mode.




3






4

Connect the USB cable (supplied) to the USB jack on your camcorder.

The location of the USB jack varies depending on the model. Refer to the separate Camera Operations Guide supplied with your camcorder for the location.

For the model that is supplied with the

Handycam Station, connect the USB cable to the USB jack on the Handycam Station, then set the USB ON/OFF switch to ON.

b

Note

• When you connect your camcorder to a computer, make sure you insert the connector in

32

Connecting to a Macintosh computer (“Memory Stick” only) the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder.

5

Connect the other end of the USB cable to the USB jack on your computer.

[USB MODE] appears on the LCD screen of your camcorder, and a “Memory Stick” icon appears on the desktop.

For details on connecting your camcorder to a computer, see “Connecting with the

USB cable (supplied)” (p. 14).

To disconnect the USB cable/ To turn off the camcorder/To eject the “Memory

Stick”

For Mac OS X (v10.0)

Turn off your computer, disconnect the USB cable, then remove the “Memory Stick” from the camcorder.

For Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac

OS X (v10.1/v10.2)

1

Quit all applications running on the computer.

2

Drag and drop the “Memory Stick” or drive icon on the desktop onto the

[Trash] icon.

Copying pictures recorded on a


To copy pictures recorded on a tape to your computer, copy the pictures to a “Memory

Stick” on the camcorder first.

Double-click the “Memory Stick” icon.

Then, drag and drop the desired picture file onto the hard disk icon.

To play back movies

You need QuickTime 3.0 or a later version installed on your computer.

The picture or sound may break up when you directly play back a picture saved on a “Memory

Stick.” Make sure to copy the picture file to the hard disk before playing.

b

Note

• You cannot copy pictures saved on a “Memory

Stick” to your computer using Image Transfer.

Connecting to a Macintosh computer (“Memory Stick” only)

33

Other functions

Creating DVDs (on

Sony VAIO series computers only)

to i.LINK (IEEE1394) connector i.LINK cable

(optional)

Interface or

MICROMV

Interface

You can create DVDs when you connect your camcorder to a Sony VAIO series computer* that supports “Click to DVD” via an i.LINK cable (optional). The picture will be automatically copied and written to a DVD.

The following procedures describe how to create a DVD from a picture recorded on a tape.

For system and operation requirements, visit the following URL:

* Note that you need a Sony VAIO computer equipped with a DVD drive that can be used to write DVDs. You also need the computer with a compatible version of

“

Click to DVD

”

(Sony original software) installed.

DV format model (Ver.1.2 or later)

MICROMV format model (Visit the following

URL.)

– U.S.A.

http://www.ita.sel.sony.com/support/ dvimag/

– Asia Pacific Regional http://www.css.ap.sony.com/

– Korea http://scs.sony.co.kr/

– Taiwan http://www.sony.com.tw/cic/

– China http://www.sonystyle.com.cn/vaio/

34

Other functions

– Thailand http://www.sony.co.th/vaio/index.html

– United Kingdom http://www.vaio-link.com/uk/info/ ctdvd_upd_13.shtm

– Germany http://www.vaio-link.com/DE/info/ ctdvd_upd_13.shtm

– France http://www.vaio-link.com/FR/info/ ctdvd_upd_13.shtm

– Spain http://www.vaio-link.com/SP/info/ ctdvd_upd_13.shtm

Using the Direct Access to “Click to

DVD” function for the first time

The Direct Access to “Click to DVD” function enables you to create DVDs easily if your camcorder is connected to a computer. Before operating the Direct Access to “Click to DVD” function, follow the steps below to start “Click to DVD Automatic Mode Launcher.”

1


2

Click the start menu, then select [All

Programs].

3

Select [Click to DVD] from the programs displayed, then click [Click to DVD

Automatic Mode Launcher].

[Click to DVD Automatic Mode Launcher] starts up.

z

Tips

• After you start up [Click to DVD Automatic Mode

Launcher] once, from then on it starts up automatically when you turn on your computer.

• [Click to DVD Automatic Mode Launcher] is set up for each Windows XP user.

1


Quit all applications running with i.LINK.

2


EDIT mode.

Use the supplied AC Adaptor as the power source since it takes a few hours to create a

DVD. For details, refer to the separate


3

Insert a recorded cassette into your camcorder.

4

Connect your camcorder to a computer via an i.LINK cable

(optional).

b

Note

• When you connect your camcorder to a computer, make sure you insert the connector in the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder.

5

Touch [P-MENU], [MENU] and

[ (EDIT/PLAY)], then touch to select [BURN DVD].

“Click to DVD” starts up and the on-screen instructions appear on your computer.



6

Place a writable DVD in the disc drive of the computer.

7

Touch [EXEC] on the LCD screen of your camcorder.

0:00:00:00

BURN DVD

START

CREATE DVD?

EXEC CANCEL

The status of the operation on your computer is displayed on the LCD screen of your camcorder.

CAPTURING: The picture recorded on the tape is being copied to the computer.

CONVERTING: The picture is being converted to the digital format.

WRITING: The picture is being written onto the DVD.

z

Tip

• If you use a DVD-RW/+RW which has other data stored on it, the message [This is a recorded disc. Delete and overwrite?] appears on the LCD screen of your camcorder. When you touch [EXEC], the existing data is erased and new data will be written.

8

Touch [NO] after creating a DVD.

The disc tray comes out automatically.

0:00:00:00

BURN DVD

COMPLETED

Create another copy?

Disctray opens.

YES NO

To create another DVD with the same content, touch [YES]. The disc tray comes out and place a new writable DVD in the disc drive.

To cancel the operation

On your camcorder, touch [CANCEL] after step

5, or select [CANCEL], then touch [YES] in step 7.

Note that you cannot cancel the operation after

[Finalizing DVD] is displayed on the LCD screen.

b

Notes

• Do not disconnect the i.LINK cable or set the

POWER switch to another mode on your camcorder until the picture is completely copied to the computer.

• The DVD will be created even if you disconnect the i.LINK cable (optional) or turn off the power of your camcorder while [WRITING] or [CONVERTING] is displayed.

• When any of the following occurs, copying of the picture is canceled. A DVD containing the data up to the point the operation was canceled will be created.

Refer to the help files of “Click to DVD Automatic

Mode” for details.

– When there is a blank portion of 10 seconds or longer on the tape.

,

continued

Other functions

35

– When the data of the tape contains a date before the recording date of the later images.

– When normal and wide size pictures are recorded on the same tape.

• You cannot operate your camcorder in the following situations:

– While playing back a tape

– While recording images onto a “Memory Stick”

– When touching [P-MENU], [MENU], [

(STANDARD SET)] and [A/V tDV OUT], then touch to select [ON]. (DV format models only)

– When “Click to DVD” is started up from the computer

36

Other functions

Connecting an analog

VCR to the computer via your camcorder

(DV format models only)

— Digital convert function

DV Interface to i.LINK (IEEE1394) connector i.LINK cable (optional)

A/V (audio/video) jack

A/V connecting cable

(supplied)

*

(White)

(Red)

AUDIO/VIDEO jacks

(Yellow)

S video plug (Black)

: Signal flow

* The supplied A/V connecting cable has a video plug and S video plug. You need to set which plug to use depending on the equipment to be connected.

For details, refer to the separate Camera Operations

Guide supplied with your camcorder.

You can convert an analog signal output from an analog device such as a VCR to a digital signal and transfer it to a digital device, such as a computer, via your camcorder.

Select [P-MENU], [MENU], [

(STANDARD SET)], [DISPLAY], then [LCD

PANEL] (default setting). For details, refer to the separate Camera Operations Guide supplied with your camcorder.

VCR (analog)

To carry out this operation, you need a software application (such as ImageMixer Ver.1.5 for

Sony) that can read a video signal installed on your computer.

ImageMixer Ver.1.5 for Sony is used to describe the operation in this section.

,

continued

Other functions

37

1

Start up the computer, and doubleclick [ImageMixer Ver.1.5 for Sony] displayed on the desktop.

4

Click (Preference), check

[Capture using DV Cam.] in [DVC

Capture settings], then click [OK].

2


3

Click

Mode).

(DV Camcorder Capture

z

Tip

• You can also use the USB cable to connect your camcorder and computer for converting signals.

Click (USB Device Capture Mode) in this case.

5

Connect your camcorder to the computer using an i.LINK cable

(optional), then connect it to a VCR

(analog equipment) using the A/V connecting cable (supplied).

b

Note

• When you connect your camcorder to a computer, make sure you insert the connector in the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder.

6


EDIT mode.

7


(STANDARD SET)]and [A/V

tDV

OUT], then touch to select [ON].



38

Other functions

8

Click

Capture).

12

Click (Stop) at the point you want to stop copying.

9

Select an album to copy the picture to.

13

Stop the playback on the VCR (analog equipment).

10

Start the playback on the VCR (analog equipment).

11

Click (Capture) at the point you want to start copying.

b

Notes

• You may not be able to output the pictures correctly depending on the condition of the analog video signal input to your camcorder.

• You cannot transfer pictures with copyright protection signals to a computer.

• You can use a USB cable instead of an i.LINK cable

(optional) to transfer pictures to a computer. Note, however, that the picture displayed may lack the smoothness.

• The location of the USB jack and the shape of the cable vary depending on the model. For details, refer to the separate Camera Operations Guide supplied with your camcorder.

(red) turns to (black).

Other functions

39

Additional information

Troubleshooting

Symptom Cause and/or Corrective Actions

The computer does not recognize your camcorder.

cDisconnect the cable from the computer and camcorder, then connect it again firmly.

cFor the model that is supplied with the Handycam Station, set the USB ON/OFF switch to ON.

cFor the model that is supplied with the Handycam Station, connect the Handycam Station to the camcorder firmly.

cDisconnect the USB device other than the keyboard, the mouse, and the camcorder from the computer.

You cannot view the pictures the camcorder is seeing on the computer.

cDisconnect the cable from the computer, turn on the camcorder, then connect it again.

cSlide the POWER switch to select the CAMERA-TAPE mode, touch [P-MENU], [MENU], [ (STANDARD SET)] and

[USB-CAMERA], then touch to select [USB STREAM].

You cannot view the pictures recorded on a tape on the computer.

cDisconnect the cable from the computer, turn on the camcorder, then connect it again.

cSlide the POWER switch repeatedly to select the PLAY/EDIT mode, touch [P-MENU], [MENU], [ (STANDARD SET)] and [USB-PLY/EDT], then touch to select [USB STREAM].

You cannot view the pictures recorded on a tape on the

Macintosh computer.

You cannot view the pictures recorded on a “Memory Stick” on the computer.

cTo copy pictures recorded on a tape to your Macintosh computer, copy the pictures to a “Memory Stick” in your camcorder first, then copy the pictures recorded on the

“Memory Stick” to your computer.

cInsert the “Memory Stick” firmly.

cYou cannot use an i.LINK cable. Connect the camcorder and the computer using the USB cable.

cSlide the POWER switch repeatedly to select the PLAY/EDIT mode, touch [P-MENU], [MENU], [ (STANDARD SET)] and [USB-PLY/EDT], then touch to select [STD-USB].

• The computer does not recognize the “Memory Stick” during camcorder operation such as tape playback or editing.

cFinish camcorder operation before connecting the camcorder to the computer.

40

Additional information

Symptom

The image does not appear on

ImageMixer Ver.1.5 for Sony when using the USB cable.

Cause and/or Corrective Actions

cThe USB driver has been registered incorrectly as the computer was connected to your camcorder before the installation of the

USB driver was completed. Follow the procedure below to install the USB driver correctly.

For Windows 98 * /Windows 98SE/Windows Me

* When copying or playing the pictures on a tape using a computer, the operation is not guaranteed on Windows 98.

1

Check that your camcorder is connected to a computer.

2

Right-click [My Computer], then click [Properties].

The [System Properties] screen appears.

3

Click the [Device Manager] tab.

4

If other devices below are already installed, right-click them, then click [Remove] to delete them.

For copying and viewing pictures recorded on a tape

• [USB Audio Device] in the [Sound, video and game controllers] folder

• [USB Device] in the [Other devices] folder

• [USB Composite Device] in the [Universal Serial Bus

Controller] folder

For copying and viewing pictures recorded on a


• [? Sony Handycam] or [? Sony DSC] with a “?” mark in the

[Other devices] folder

5

When the [Confirm Device Removal] screen appears, click [OK].

6

Turn off the power of your camcorder, disconnect the

USB cable, then restart the computer.

7

Re-install the USB driver (p. 8).

b

Note

• Deleting anything other than [USB Audio Device], [USB Device], [USB

Composite Device], [? Sony Handycam] and [? Sony DSC] may cause malfunction of your computer.

,

continued


41

Symptom



(Continued from the previous page)


For Windows 2000


1


2



3

Click the [Hardware] tab.

4

Click [Device Manager].

5

Click [View], then click [Devices by type].

6



• [USB Composite Device] or [Sound, video and game controllers] in the [Universal Serial Bus Controller] folder

• [Composite USB Device] in the [USB Audio Device] folder

• [Composite USB Device] in the [Other devices] folder





7


8



9


b

Note

• Deleting anything other than [USB Composite Device], [Sound, video and game controllers], [Composite USB Device], [? Sony Handycam] and [? Sony DSC] may cause malfunction of your computer.

42


Symptom



(Continued from the previous page)


For Windows XP


1


2

Click [Start].

3



4

Click the [Hardware] tab.

5

Click [Device Manager].

6

Click [View], then click [Devices by type].

7



• [USB Composite Device] in the [Universal Serial Bus

Controller] folder

• [USB Audio Device] in the [Sound, video and game controllers] folder

• [USB Device] in the [Other devices] folder





8


9



10


The “Memory Stick” icon

([Removable Disk] or [Sony

MemoryStick]) does not appear on the computer screen.

b

Note

• Deleting anything other than [USB Composite Device], [USB Audio

Device], [USB Device], [? Sony Handycam] and [? Sony DSC] may cause malfunction of your computer.

cSlide the POWER switch repeatedly to select the PLAY/EDIT mode on your camcorder.

cInsert a “Memory Stick” into your camcorder. cDisconnect the USB device other than the keyboard, the mouse,

and the camcorder from the computer (p. 15).

cTouch [P-MENU], [MENU], [

(STANDARD SET)] and

[USB-PLY/EDT], then touch to select [STD-USB].

• The computer does not recognize the “Memory Stick” during camcorder operation such as tape playback or editing.

cFinish camcorder operation before connecting the camcorder to the computer.

,

continued


43

Symptom

ImageMixer Ver.1.5 for Sony does not function correctly.


cClose ImageMixer Ver.1.5 for Sony, then restart the computer.

An error message appears while operating ImageMixer Ver.1.5 for Sony.

cClose ImageMixer Ver.1.5 for Sony first, then set the POWER switch on your camcorder to another mode.

Image Transfer does not start up.

cDisplay pictures recorded on a “Memory Stick” with the following procedures.

1

Double-click [My Computer].

2

Double-click the icon for the newly recognized drive

[Removable Disk (F:)] (For Windows XP, [Sony

MemoryStick]).

It may take some time until the drive is recognized. If the computer does not recognize it, the USB driver may be installed incorrectly.

For details, see “The image does not appear on ImageMixer

Ver.1.5 for Sony when using the USB cable.” (p. 41).

3

Double-click the desired image file.

z

Tip

• Windows XP does not start up Image Transfer automatically at the default setting even though [Removable Disk] appears in [My

Computer]. To deactivate the setting, see “For Windows XP” in

“Copying and viewing pictures recorded on a “Memory Stick”” (p. 27).

An error message appears when you place the supplied CD-ROM in your computer.

cSet the computer display as follows:

Windows: 800 × 600 dots or more, High Color (16 bits, 65 000 colors) or more

Macintosh: 800 × 600 dots or more, 32 000 colors or more

[USB Streaming... This function is not available.] appears on the screen of your camcorder.

cStart the operations for MEMORY MIX, recording or playing back pictures recorded on a “Memory Stick” after

USB

Streaming is finished.

Video CDs cannot be created.

• CD-RWs cannot be used.

• WINASPI is not installed. To use the CD writing function in

ImageMixer, WINASPI should be installed on your computer

(p. 10).

b

Note

• Installing WINASPI may cause malfunction of your computer if another writing software application has already been installed.

44


Symptom

Images from analog equipment are not displayed on the computer screen when the signal convert function is being used.


cClick (Preference) at the upper right-hand corner of the

ImageMixer screen, check [Capture using DV Cam.] in [DVC

Capture settings], then click [OK].

There is no sound when the camcorder is connected to the computer via a USB cable.

The image displayed on the computer is distorted.

• Sound is not supported on Windows 98.

cChange the settings for your computer environment as described in the following procedures:

1

Double-click [ImageMixer Ver.1.5 for Sony] on the desktop.

2


3

Click (USB Device Capture Mode), then click

(Preference).

4

Select another device from the pull-down menu of [Sound capture device], then click [OK].

5

Close ImageMixer Ver.1.5 for Sony, then restart it.

If the problem is not solved, repeat the procedure above.

cAdjust the image quality with the slider to view images with a large amount of data. Adjusting the slider to the left reduces the noise, but the image quality deteriorates.

Slider b

Note

• The picture goes dark while the adjustment takes place after you click the slider.

,

continued


45

Index

A

Album

.................................. 28

AVI format

.......................... 25

B

BURN DVD

........................ 35

C

Capture

................................ 21

CD-R

................................... 25

CD-ROM

..................... 8 ,

9

,

11

CD-RW

......................... 25

,

44

Click to DVD

...................... 34

Copying and viewing pictures (on a “Memory

Stick”)

..................... 26

,

33

Copying and viewing pictures recorded on a tape

....... 19

D

Digital convert function

..... 37

DirectX 8.0a

........................ 10

Drag and drop

..................... 21

DV Interface

................. 16

,

34

DVD

.................................... 34

H

Handycam Station

........ 14

,

32

I

i.LINK cable

........... 13

,

16

,

34

Image Transfer

.............. 11

,

26

ImageMixer Ver.1.5 for Sony

.................... 9

,

19

Install

........................... 8

,

9

,

11

M

Macintosh

........................ 3

,

31

MEMORY MIX

................. 29

“Memory Stick”

..... 26 ,

29

,

33

MICROMV

........................... 2

O

On-line help

........................ 22

P

PC Camera

.......................... 23

Preview

................................ 22

U

USB cable

........................... 14

USB driver

............................ 8

USB Streaming

................... 23

V

VAIO

................................... 34

Video CD

............................ 24

Video Streaming

................. 23

W

WINASPI

............................ 10

Windows

......................... 3

,

19

Windows Media Player

..... 26

Writable DVD

.................... 35

46


Printed on 100% recycled paper using

VOC (Volatile Organic Compound)-free vegetable oil based ink.

Printed in Japan

No results