User Manual Avantree Priva III

User Manual Avantree Priva III
Catalogue
1. Features & AptX Low Latency
1.
Features & AptX Low Latency
2
2.
What’s in the box?
5
3.
Product Overview
6
4.
Power ON / Power OFF
7
5.
Pair and connect to 1st Bluetooth headphone/receiver
8
Multipoint Bluetooth Transmitter
6.
Pair and connect to 2nd Bluetooth headphone/receiver
9
Avantree Priva III
7.
Reconnection
10
8.
Connect Priva III to an audio source
11
9.
Use for PC / Laptop
12
10.
Locating Priva III
14
11.
Restore Factory Default Settings
15
12.
LED indications
16
13.
Product Specifications
User Manual
Scan me for warranty registration
www.avantree.com
Dual link codec
2. What's in the box:
Under Dual Link Mode (connecting with 2 headphones / receivers simultaneously),
A. Avantree Priva III
To take advantage of the better performance of the APTX Low Latency Codec,
the transmission codec will be the one with longer latency, eg: If one device
B. Magnetic base
the receiver must support the same codec. If the receiver only supports the
C. 3.5 mm audio cable
codec will be aptX; If both headphones supports aptX LL, the final transmission
D. RCA audio cable
Audio delay when paired with different headphones/receiver-
codec will be aptX LL.
E. Micro USB charging cable
~ 40ms
aptX codec
~ 70ms
Fast Stream codec
~ 40ms
SBC codec (most standard Bluetooth audio)
~ 220ms
3. Product Overview
3 ON / OFF
6
4 3.5mm audio jack
7
5 USB in / charging socket
F. User manual
The audio delay will be
-2-
2
supports aptX LL and the other only supports aptX, then the final transmission
aptX Low Latency codec
Note: Priva III supports true stereo headsets rather than mono A2DP headsets.
❶ LED indicator
normal AptX codec, or the SBC one, those codecs will be used instead.
Headphones/receiver support -
17
-1-
Avantree Priva III is a Bluetooth audio transmitter incorporating the latest “aptX Low
Latency” technology, for CD-like quality sound with virtually no delay. With multipoint
receiver support, Priva III allows you to share the fun and enjoyment of audio with
others.
A
G. Quick start guide
B
FUNCTION
Set Priva III to pairing mode – Hold for 1 seconds until ❶
flashes BLUE and RED alternately
❷ MFB
Reset Priva III – In pairing mode, Hold for 5 seconds until ❶
BLUE LED is on for 2s
Simply Convenient
User Manual
aptX Low Latency Multipoint Bluetooth Transmitter
Priva
D
C
Note: Audio delay for Fast stream codec is almost the same as aptX Low
Latency codec, "but the audio quality of the latter is much higher."
-4-
G
❸ ON / OFF
❹ 3.5MM AUDIO JACK
Connect 1st headphone
Pairing
Connected
Enjoy
Connect 2nd headphone
Enjoy
Press & hold for 1 sec
into pairing mode again,
wait until connected
Set your headphones / receiver to pairing mode.
Keep the devices close and wait until the LEDs on both devices slow
down. Now Priva III is ready for use.
Power OFF:
Slide the button to “OFF” or unplug the charging cable.
-6-
6. Pair and connect to 2nd Bluetooth headphones/receiver
The first time you turn on Priva III, it will automatically go into pairing mode - the
LED flashes BLUE and RED alternately.
Step 1
Step 2
Power on / off Priva III
Analog Audio input
Connect to USB charger for power
Micro USB Audio input
-5-
5. Pair and connect to 1st Bluetooth headphones/receiver
Power ON:
Power Priva III (no battery attached) via the supplied micro USB cable
Step 1
to your own USB chargers (wall charger / travel charger, etc.) with
5V/500mA~2A, or PC/TV USB port.
Slide the button to “ON”.
Step 2
H
F
www.avantree.com
❺ MICRO USB SOCKET
-3-
4. Power ON / Power OFF
E
7. Reconnection
There is no need to pair Priva III each use. It will auto reconnect to the last paired
headphones / receiver once you power on both devices and wait for 5~10s.
For other paired headphones / receivers, they may auto reconnect to Priva III after
waiting 5~10s once powered on. Otherwise, please put both devices into pairing
Connect to TV’s audio
output port
Connect 1st
headphone as above
mode.
How to get Priva III into pairing mode manually-
USB port of TV
Turn on, wait
Get headset
until LED blinks into pairing
blue & red
mode
Wall charger
Micro USB charging cable
Avantree
Priva II
Wait for 5~15 secs,
both LEDs slow down
Connect to TV’s audio
output port
Step 1
Step 2
Step 3
Step 4
USB port of computer
-7-
Connect your first device as above.
Set second headphones / receiver to pairing mode.
Set Priva III to pairing mode again – press and hold MFB for 1 second
until the LED flashes BLUE and RED alternately.
Keep the devices close and wait until the LEDs on both devices slow
down.
- 10 -
10. Locating Priva III
9. Use for PC / Laptop
Priva III supports ANALOG audio output (3.5mm / RCA audio jack or via Digital to
Analog Audio Converter). Please connect Priva III to correct audio output on your
TV or any other device.
the LED flashes BLUE and RED alternately.
-9-
-8-
8. Connect Priva III to an audio source
Under standby mode (except dual link mode), press and hold MFB for 1 second until
Priva III also supports Micro USB audio input, and the sound quality is much
greater than the ANALOG audio input. You can use it in this way on PC / Laptop
(but most TVs will not support this)
3
To achieve greater operational range, please don’t hang Priva III behind TV.
4
Avantree Priva III
Avantree
Priva II
ON
Optimal
OFF
Avoid
3.5mm audio jack
RCA audio jack
Optical output
How to verify the correct audio output: Simply plug in wired earphones to test
the sound. If they can work with the socket, you can connect Priva III to it.
For more detailed information, please refer to included Quick User Guide.
Connect Priva III to PC via the supplied
Micro USB sync charge cable
Note:
- 11 -
12. LED indications
You may need to reset Priva III if it is not working as expected, such as not
pairing, wrong LED indication, audio issues, etc. When Priva III is reset to
factory default settings, all the paired device information will be erased.
Step 2
Step 3
1
Get Priva III into pairing mode – press and hold MFB for 1 second until
the LED flashes BLUE and RED alternately.
Press and hold the MFB button for 5s, then you will see the BLUE LED
is on for 2s.
Then it will enter pairing mode automatically
Enter pairing mode
2
Reset
- 15 -
Front
Back
- 13 -
- 14 -
13. Product Specifications
Status
LED indicator
Power on
Blue LED on for 1 second
Pairing mode
Connected with SBC codec
LEDs blink blue and red alternately
Blue LED flashes once every 5 seconds
Connected with Faststream codec
Blue LED flashes twice every 5 seconds
Connected with aptX codec
White LED flashes once every 5 seconds
Connected with aptX-LL codec
White LED flashes twice every 5 seconds
Reconnect
Blue LED flashes once every 2 seconds
Restored factory default settings
Blue LED on for 2 seconds
Press and hold the
MFB button for 5s,
then you will see
the BLUE LED is
on for 2s.
Hold for 1 second
until LED flashes
blue and red.
Set “Avantree Priva III” as “Default
Device”.
Pair and connect Priva III with
Headphones.
- 12 -
11. Restore Factory Default Settings
Step 1
right of the PC screen and select "Playback
devices.
• Bluetooth version: 4.2
• Bluetooth profile: A2DP
• Audio codec: SBC, Fast Stream, AptX, AptX-LL
• Operating Range: Up to 30 meters
• Weight: Body approx. 16 g; Base approx. 7 g
• Size: 48 mm(L) x 48 mm(W) x 15 mm(H)
Need help?
Dispose of the packaging and
this product in accordance with
the latest provisions.
- 16 -
QDID: 64561
FCC ID: WJ5-BTTC-318
- 17 -
- FAQ:support.avantree.com
- Live chat: www.avantree.com (5:00 pm–1:00 am PST)
- Email: support@avantree.com
- Telephone support:+0 800 644 6388 (CET 8am-3pm)
+1 800 232 2078 (PST 9am-5pm)
+86 755 82285022 (CST 9am-6pm)
www.avantree.com
support@avantree.com
Z-PKMN-TC318-BLK-V0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising