Everlast 1654801 Owner's Manual

Add to my manuals
35 Pages

advertisement

Everlast 1654801 Owner's Manual | Manualzz

Owner’s Manual

Model No.

1654701

- Assembly

- Operation

- Adjustments

- Parts

- Warranty

CAUTION:

You must read and understand this owner’s manual before operating unit.

Keep this manual for future reference.

Serial number

Write the serial number in the space above for reference.

Serial number can be found at the front bottom section of the

Treadmill .

Manufacture’s Limited Warranty

Dyaco Canada Inc. warrants all its home use treadmills parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt. Dyaco

Canada Inc.’s responsibilities include providing new or remanufactured parts, at Dyaco Canada

Inc.’s option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by Dyaco

Canada Inc. directly to a consumer. The warranty period applies to the following components:

Limited Warranty

Frame Lifetime

Motor 10 Years

All Other Components 1 Year

Labour 1 Year

This warranty is not transferable and is extended only to the original owner.

This warranty shall not apply to treadmills which are (1) used for commercial or other income producing purpose, or (2) subject to misuse, neglect, accident or unauthorized repairs and alterations

This warranty provided herein is in lieu of all other express warranties. Any implied warranties, including any implied warranties of merchantability or fitness for particular purpose are limited in duration to the first 12 months from the date of purchase. All other obligations or liabilities, including liability for consequential damages are hereby excluded

Repair Parts and Service

All of the parts for the Everlast treadmill, shown in figure can be ordered from: Dyaco

Canada Inc. 6050 Don Murie Street, Niagara Falls, Ontario, L2G 0B3. When ordering parts, the parts will be sent and billed at the current prices. Prices may be subject to change without notice. Check or money order must accompany all orders. Standard hardware items are available at your local hardware store.

To ensure prompt and correct handling of any errors, or to answer any questions, please call our Toll Free number, 1-888-707-1880, or email us at [email protected]

. or visit us at:

www.dyaco.ca

. Office hours are from 8:30 A.M. to 5:00 P.M. Monday to

Friday Eastern Standard time.

Always include the following information when ordering parts:

*Model number

*Name of each part

*Part number of each part

TABLE OF CONTENTS

Important Safety Instructions 2 Important Electrical Information 4

Assembly instructions 5 Folding/ Transport Instructions 10

Treadmill Operation 11 Exploded View Diagram/Parts List 20

General Maintenance 24 Service Checklist – Diagnosis Guide 28

Troubleshooting 29 Training Guidelines 30

Customer Service 1-888-707-1880 1 Dyaco Canada Inc. 2014

Email: [email protected]

IMPORTANT SAFETY INFORMATION

THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL

CAUTION: Before starting any exercise program, it is recommended that you consult your physician.

WARNING: Connect this unit to a properly grounded outlet only.

DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet immediately after using and before cleaning.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons :

1. Use 120 volt a.c. household current on a dedicated circuit.

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See diagram below for grounding methods.

2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

3. The use of an extension cord with this product is not recommended. If an extension cord is needed, use a short (less than 10 feet) heavy gauge (16 gauge or better) extension cord with a three prong

(grounded) plug and receptacle.

4. Never leave the treadmill unattended when plugged in. Remove the safety key and unplug the unit from the outlet when not in use and before removing or replacing parts.

5. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has been dropped, damaged, or exposed to water. Never move the treadmill belt while the power is turned off.

6. Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away from heated surfaces and open flames.

7. Fitness equipment must always be installed and used on a flat surface. Do not use outdoors or near water. Do not place the unit on a loose rug or uneven surface. It is recommended to use an equipment mat to prevent the unit from moving while it is being used, which could possibly scratch or damage the surface of your floor. It is recommended to have a minimum of 3 metres safe clearance on all sides of the treadmill while in use.

8. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage, covered patio or near water.

9. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

10. Read, understand, and test the emergency stop procedure before using the treadmill. Do not insert any objects into any openings.

11. Inspect and properly tighten all parts of the treadmill regularly.

12. Keep children and pets away from this equipment at all times while exercising.

13. Handicapped individuals should have medical approval and close supervision when using this treadmill.

14. Do not place hands or feet under the treadmill. Always keep hands and legs off of the treadmill

Customer Service 1-888-707-1880

Email: [email protected]

2 Dyaco Canada Inc. 2014

when others are using it.

15. Never turn on treadmill while standing on treadbelt. Always hold the handrails while using the treadmill. Always return the treadmill to the slowest speed to provide for safe dismount and low speed restart.

16. To disconnect, turn all controls to the off position, then remove plug from outlet.

17. Do not attempt to raise, lower or move the treadmill until it is properly assembled. See assembly on page 8 and to fold and move the treadmill on page 10 .

Care must be taken when lifting or moving the equipment, so as not to injure your back. Always use proper lifting techniques. You must use any attachments that are not recommended by the manufacturer.

18. Use the treadmill only for its intended use as described in this manual. Do not use any attachments that are not recommended by the manufacturer.

19. User weight should not exceed 350lbs (159 kg).

20. Never allow more than one person on the treadmill at once.

21. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your heart rate to gradually increase and decrease and will help prevent straining muscles.

22. Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction with the level of exercise being performed.

If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

23. Start your program slowly and very gradually increase your speed and distance.

24. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that could become entangled with the moving parts of your treadmill. Do not walk or jog barefoot, in stocking feet or loose fitting shoes or slippers.

25. This treadmill is intended for in-home use only. Do not use the treadmill in any commercial, rental or institutional setting.

WARNING: Before beginning any exercise program consult your physician. This is especially important for individuals over the age of 35 or persons with preexisting health problems. Read all instructions before using any fitness equipment. We assume no responsibility from personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Customer Service 1-888-707-1880 3 Dyaco Canada Inc. 2014

Email: [email protected]

Important Electrical Information

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power.

● If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such

conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. See Diagnosis Guide, page 23.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment.

This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will

not fit the outlet; have a proper outlet installed by a qualified electrician.

NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer.

● Understand that changes in speed and incline do not occur immediately. Set your desired work level on the computer console and release the adjustment key. The computer will obey the command gradually.

NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage treadmill components.

● Use caution while participating in other activities while walking on your treadmill, such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

NEVER mount or dismount the treadmill while the belt is moving. Our treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.

● Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure, contact your dealer.

Customer Service 1-888-707-1880

Email: [email protected]

4 Dyaco Canada Inc. 2014

Assembly Instructions

!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS.

PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!

Serious injury could occur if this folding treadmill is not unpacked properly.

There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping. If this strap is not removed properly the treadmill could spring open unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed.

To ensure your personal safety during removal of the shipping strap please make sure the treadmill is positioned flat on the ground, in the orientation it would be in if you were using the treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap

(that you need to grab to remove it) happens to be under the treadmill deck, reach under the deck to grab it, but do not tilt the treadmill up to gain access to the strap end.

Unpack the treadmill and locate the hardware pack. The hardware pack is separated into five sections; one section containing tools and four sections labeled steps 1-4 which contain the hardware needed for assembly of each step. The assembly steps below are numbered one through four and correspond to the hardware in the numbered sections of the hardware pack. Remove only the hardware for the step you are currently assembling to avoid confusion and mix ups.

Customer Service 1-888-707-1880

Email: [email protected]

5 Dyaco Canada Inc. 2014

Before you begin.

Thank you for purchasing our product. Even though we go to great efforts to ensure the quality of each product we produce, occasional errors and /or omissions do occur. In any event should you find this product to have either a defective or a missing part please contact us for a replacement.

This product has been designed for home use only. Product liability and guarantee conditions will not be applicable to products being subjected to professional use or products being used in a gym center. This exercise equipment was designed and built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before assembly and operation of this machine.

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

Console

Safety Key

Incline Adjustment Switch

Speed Adjustment Switch

Upright

Running Belt

Foot Rail

Adjusting

Bolt

Main Frame

MAX. USER WEIGHT LIMIT 159 KGS (350 LBS)

Wheels

On/Off Switch

Circuit Breaker

Power Cord

Customer Service 1-888-707-1880

Email: [email protected]

6 Dyaco Canada Inc. 2014

Hardware Packing

#80.

Ø8 × 1.5T

Split Washer (4pcs)

#44. Safety Key

(1pc)

#103. M6 (66 × 86)

L Allen Wrench (1pc)

#100.

Ø8 × Ø18 ×1.5T

Flat Washer (8pcs)

#125. 5/16" × UNC18 × 3/4"

Button Head Socket Bolt (8pcs)

#90. 13L

Wrench (1pc)

#99. 5/16" × UNC18 × 1/2"

Hex Head Bolt (8pcs)

#104. Lubricant

(1pc)

#102. Combination M5 Allen Wrench

& Phillips Head Screw Driver (1pc)

Customer Service 1-888-707-1880

Email: [email protected]

7 Dyaco Canada Inc. 2014

Assembly Instructions

Step 1.

Remove the treadmill from the carton and lay it on a smooth level surface.

Step2.

Connect Computer Cable (Middle) (54) with Computer Cable (Lower) (55) then insert

Right and Left Uprights (4) and (5) into the Frame Base (2) and use 13m/m Wrench

(90) to tighten 8 pcs of 5/16" × UNC18 × 1/2"_Hex Head Bolts (99) and 8pcs of Ø8 ×

Ø18 × 1.5T Flat Washers (100).

5

90

99

100

99

55 100

54

99

100

99

100

4

100

100

99

99

99

100

99

100

2

Customer Service 1-888-707-1880

Email: [email protected]

8 Dyaco Canada Inc. 2014

Step 3

1.

Connect the Computer Cable (Middle) (54) to the Computer Cable (Upper) (53).

2.

Connect the Speed Adjustment Switch W/Cable(Upper) (114) to the Speed/Hand

Pulse Complex (28).

3.

Connect the Incline Adjustment Switch W/Cable(Upper) (115) to the Incline/Hand

Pulse Complex (29).

4.

Insert the Console Assembly (21) into the right and left Uprights (4) and (5) and secure with 4 pcs of 5/16" × UNC18 × 3/4" Button Head Socket Bolts (125) with 4 pcs of Ø8 × 1.5T Split Washers (80) by using the Combination M5 Allen Wrench &

Phillips Head Screw Driver (102).

Tip: Avoid pinching wires.

21

28

54

114

53

80

115

80

29

102

125

4

125

5

Step 4.

Install the Handrail Support (9) between the left and right Uprights (5) and (4) and use the Combination M5 Allen Wrench & Phillips Head Screw Driver (102) to tighten 4 pcs of 5/16" × UNC18 × 3/4" Button Head Socket Bolts (125).

125

9

125

102

Your unit is now fully assembled. Ensure all nuts and bolts are firmly tightened prior to use.

Customer Service 1-888-707-1880

Email: [email protected]

9 Dyaco Canada Inc. 2014

Folding Instructions

Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position.

■ TO FOLD THE TREADMILL

Lift the deck until the latch clicks in place.

■ TO UNFOLD THE TREADMILL

Press the tube with your foot at the yellow sticker

To release latch, see picture to the right.

Transportation

The treadmill is equipped with four transportation wheels. After folding simply roll the treadmill away.

Customer Service 1-888-707-1880

Email: [email protected]

10 Dyaco Canada Inc. 2014

Treadmill Operation

Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or walking board. Such substances will deteriorate the walking belt and cause excessive wear.

How to plug in the power cord.

GROUNDING INSTRUCTIONS.

This product must be grounded. No plug adapter should be used with this product.

WARNING:

Improper connection of the equipment grounding conductor can result in a risk of an electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product, if it will not fit the outlet; have a proper outlet installed by a qualified electrician. The use of an extension cord with this product is not recommended. If an extension cord is needed, use a short (less than 10 feet) heavy gauge (14 gauge or better) extension cord with a three prong (grounded) plug and receptacle.

IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer recommended power cord.

1 Plug the indicated end of the power cord into the socket of the treadmill. See drawing below.

2 Plug the power cord into an appropriate outlet that is properly installed and gounded. See drawing below. Important: The treadmill is not compatible with GFCI-equipped outlets .

Note: Your power cord and outlet may appear different

Customer Service 1-888-707-1880

Email: [email protected]

11 Dyaco Canada Inc. 2014

Operation of your treadmill

GETTING STARTED:

CAUTION:

Before operating the console, read the following precautions:

Do not stand on the walking belt when turning on the treadmill

Always wear the safety key. Pulling the safety key will stop tread-belt movement.

Adjust the speed in small increments to avoid sudden jumps in speed

To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the console and place only sealed water bottles in the water bottle holders.

Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower.

Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.

How to use the safety key

1. Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:

The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the red Stop / Pause switch in normal operation.

Customer Service 1-888-707-1880

Email: [email protected]

12 Dyaco Canada Inc. 2014

TO OPERATE TREADMILL

CAUTION: To avoid injury, hold onto the handrails while mounting and dismounting the treadmill. Hold onto the handrails and place feet on siderails before starting. Step onto the walking belt only a slowest speed. Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.). Before operating the console make sure that the power cord is properly plugged in and the on / off button is on. Attach the magnet end of the safety key onto the monitor and attach the clip end of the safety key to your clothing (ie: waistband). If you should slip or fall while exercising the safety key will pull out of the console, shutting off the treadmill.

Getting started:

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood.

WINDOW DISPLAY

Speed: Displays the current speed from starting at 0.5 mph to 10 mph.

(Display shows M,MI, ML means MPH)

Time: Displays your elapsed workout time in minutes up to 99:59.

Counts down from your preset target time to 0:00 during your workout.

Distance: Displays the distance traveled in miles.

Calories: Displays the cumulative calories burned at any given time during your workout.

Note: This is a rough guide used for comparison of different exercise sessions, which cannot be used for medical purposes.

Pulse: Displays the user’s current heart rate in beats per minutes during the workout. To display your heart rate, you must hold both handrails.

Note: This is a rough guide used for comparison of different exercise sessions, which cannot be used for medical purposes.

Incline: Displays the incline level during your workout from 0 to 12.

Program: Displays the program selected.

Audio System: There is an Audio Input Jack on the front of the console, and built-in speakers. You may plug any low-level audio source signal into this port.

Audio sources include: MP3 player, iPod, portable radio, CD player or even a TV or computer.

Customer Service 1-888-707-1880 13 Dyaco Canada Inc. 2014

Email: [email protected]

Button Function

A > SPEED ▲(FAST): Pressing this button increases the speed by 0.1(mph/km). Press and hold this button for 3 seconds to increase speed rapidly. Press this button during setting the program to adjust the value (to increase).

B > SPEED ▼(SLOW):Pressing this button decreases the speed by 0.1(mph/km). Press and hold this button for 3 seconds to decrease speed rapidly. Press this button during setting the program to adjust the value (to decrease).

C > INCLINE ▲(UP): Pressing this button increases the incline level by 1. Press and hold this button for 3 seconds to increase the incline level rapidly. Press this button during setting the program to adjust the value (to increase).

D > INCLINE ▼(DOWN) : Pressing this button decreases the incline level by 1. Press and hold this button for 3 seconds to decrease the incline level rapidly. Press this button during setting the program to adjust the value (to decrease).

E > ENTER: for program setting: Press this button to set Time, Distance, Calorie and and other functions.

F > PROGRAM: Press to select desired training programs P1 ~ P24, HRC.

G > START: Press to select treadmill speed starting from 0.5/1.0 (mph / km)

H > STOP: Press once during operation to pause, twice to return to ready mode.

Pressing STOP button in the mode returns to ready mode.

I > Speed shortcut key:3、6、9 (mph/km) To set the speed rapidly.

J > incline shortcut key:3、6、9 To set the incline rapidly.

Treadmill Operation

Putting on the safety key after turning on the power, the treadmill enters the ready mode.

Press the start button to start the treadmill or press PROGRAM button to select the training mode, normal or manual mode, preset programs (P1~P24) or heart rate control mode.

Manual/Normal Mode: Press start button to start the treadmill or press PROGRAM to choose programs (P1~P24) or heart rate control mode, in the ready mode or press ENTER to set the count-down parameters (time, distance and calorie). Please consolidate SPEED▲ and ▼ to adjust time, distance and calorie then press ENTER to confirm. The system can only accept the last parameter entered, for instance, if the last entered parameter is distance, then parameters entered previously will be void. Only distance is accepted. Distance will be counted down, others will be counted up.

Preset time value: 30:00(5:00~99:00) with increment of 1:00.

Preset distance value: 5.00 km/mile (1.00~9.00) with increment of 1.00.

Preset calorie value: 500(10~9990) with increment of 10.

The starting speed is 0.5/1.0(mile/km) with the incline level 0.

Customer Service 1-888-707-1880

Email: [email protected]

14 Dyaco Canada Inc. 2014

Preset PROGRAM: There are 24 built in programs (P-1~P-24). Press PROGRAM button to choose program P-1~P-24or press START button to start. The preset time is (30:00) or press ENTER button to enter time parameter setting.

30:00(5:00~99:00) with increment of 1:00

HRC

This program controls Heart Rate. Please consult doctor or professional training guide before training. Press PROGRAM to choose H-1.

Press START button to start the training or press ENTER button for setting (time and target heart rate). Use SPEED▲▼ and INCLINE▲▼ to adjust. a > Time preset value: 30:00(5:00~99:00) with increment value of 1:00. b > When target heart rate is not set, default setting will be 116 (60 to 220), value can be increased or decrease at intervals of 1.

Once started, heart rate detection will control incline to allow heart rate to reach and maintain set target heart rate.

For example:

When heart rate is lower than target, incline will increase to increase level of workout raising heart rate. When heart rate reaches target, no changes will be made. When heart rate is higher than target, incline will decrease to lower heart rate. If heart rate does not lower and incline is not able to lower any further, The machine will stop to protect user.

Customer Service 1-888-707-1880

Email: [email protected]

15 Dyaco Canada Inc. 2014

Metric Table

Customer Service 1-888-707-1880

Email: [email protected]

16 Dyaco Canada Inc. 2014

English Table

Customer Service 1-888-707-1880

Email: [email protected]

17 Dyaco Canada Inc. 2014

HEART RATE PROGRAMS

The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of exercising comfortably. A great deal of this success has been promoted by the use of heart rate monitors. With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was either too high or too low and exercise is much more enjoyable by maintaining their heart rate in the desired benefit range.

To determine the benefit range in which you wish to train, you must first determine your Maximum

Heart Rate. This can be accomplished by using the following formula: 220 minus your age. This will give you the Maximum Heart Rate (MHR) for someone of your age. To determine the effective heart rate range for specific goals you simply calculate a percentage of your MHR. Your Heart rate training zone is 50% to 90% of your maximum heart rate. 60% of your MHR is the zone that burns fat while 80% is for strengthening the cardio vascular system. This 60% to 80% is the zone to stay in for maximum benefit.

For someone who is 40 years old their target heart rate zone is calculated:

220 – 40 = 180 (maximum heart rate)

180 x .6 = 108 beats per minute

(60% of maximum)

180 X .8 = 144 beats per minute

(80% of maximum)

So for a 40 year old the training zone would be

108 to 144 beats per minute.

90

If you enter your age during programming the console will perform this calculation automatically.

After calculating your MHR you can decide upon which goal you would like to pursue.

The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the heart and lungs) and weight control. The black columns on the chart above represent the MHR for a person whose age is listed at the bottom of each column. The training heart rate, for either cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally through the chart. A definition of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or 60% respectively, of your MHR on a schedule approved by your physician. Consult your physician before participating in any exercise program.

Customer Service 1-888-707-1880

Email: [email protected]

18 Dyaco Canada Inc. 2014

RATE OF PERCEIVED EXERTION

Heart rate is important but listening to your body also has a lot of advantages. There are more variables involved in how hard you should workout than just heart rate. Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate, all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things.

The rate of perceived exertion (RPE), also know as the Borg scale, was developed by Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20 depending upon how you feel or the perception of your effort.

The scale is as follows:

Rating Perception of Effort

6 Minimal

7 Very, very light

8 Very, very light +

9 Very light

10 Very light +

11 Fairly light

12 Comfortable

13 Somewhat hard

14 Somewhat hard +

15 Hard

16 Hard +

17 Very hard

18 Very hard +

19 Very, very hard

20 Maximal

You can get an approximate heart rate level for each rating by simply adding a zero to each rating.

For example a rating of 12 will result in an approximate heart rate of 120 beats per minute. Your

RPE will vary depending up the factors discussed earlier. That is the major benefit of this type of training. If your body is strong and rested, you will feel strong and your pace will feel easier. When your body is in this condition, you are able to train harder and the RPE will support this. If you are feeling tired and sluggish, it is because your body needs a break. In this condition, your pace will feel harder. Again, this will show up in your RPE and you will train at the proper level for that day.

Customer Service 1-888-707-1880

Email: [email protected]

19 Dyaco Canada Inc. 2014

Parts List and Diagram

KEY NO. PART NO. DESCRIPTION

21~16

21~17

21~18

21~22

21~24

21~25

21~30

21~31

22

17

18

19

21

21~1

21~2

21~6

21~12

21~15

13

14

15

16

9

10

11

12

4

5

6

7

8

1

2

3

32

33

35

36

37

40

43

44

45

46

47

28

29

30

31

23

25

26

27

470116 Front Roller W/Pulley

470118 Deck Cross Brace

470119 Sliding Tube Spring

470121~1 Console Top Cover

470121~2 Console Outer Cover

470121~6 Drink Bottle Holder

470121~12 500m/m_Safety Switch Module W/ Cable

470121~15 Speaker Grill Anchor

470121~16 600m/m_Speaker W/Cable

470121~17 0.5W Amplifier Controller

470121~18 500m/m_Amplifier Cable

470121~22 Sound Board W/Cable

470121~24 Ø3.0 × 10L_Sheet Metal Screw

470121~25 Ø3.5 × 12L_Sheet Metal Screw

470121~30 Ø22.2_Console Bracket Anchor

470121~31 Ø32_Console Bracket Anchor

470123 Metal Tube End Cap

470125 Motor Top Cover

470126 Adjustment Base (L)

470127 Adjustment Base (R)

470128 300m/m_Speed/Hand Pulse Complex

470129 300m/m_Incline/Hand Pulse Complex

470130 Breaker

470133 Handgrip End Cap

470135 Cushion

470140 Motor Cover Anchor(D)

470143 30 × 60m/m_Square End Cap

470144 Square Safety Key

470146 3/8" × UNC16 × 7T_Nut

Q'TY

6

25

4

2

2

1

1

1

1

1

2

1

6

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

2

6

2

2

5

2

1

1

3

1

1

4

1

1

1

1

1

1

1

Customer Service 1-888-707-1880

Email: [email protected]

20 Dyaco Canada Inc. 2014

79

80

81

82

75

76

77

78

69

70

71

73

74

65

66

67

68

56

58

59

61

62

63

64

52

53

54

55

48

49

50

51

90

91

92

93

94

95

96

99

100

102

103

83

84

85

86

87

88

89

104

105

111

112

113

114

115

116

470148 Power Cord

470149 300m/m_Connecting Wire (White)

470150 300m/m_Connecting Wire (Black)

470151 100m/m_Connecting Wire (Black)

470152 Motor Controller

470153 1200m/m_Computer Cable (Upper)

470154 1250m/m_Computer Cable (Middle)

470155 1200m/m_Computer Cable (Lower)

470156 Sensor W/Cable

470158 1/2" × UNC12 × 1"_Hex Head Bolt

470159 3/8" × UNC16 × 3-1/2"_Hex Head Bolt

470161 3/8" × UNC16 × 1-1/2"_Hex Head Bolt

470162 3/8" × UNC16 × 3/4"_Hex Head Bolt

470163 M8 × P1.25 × 60L_Hex Head Bolt

470164 M8 × P1.25 × 12L_Hex Head Bolt

470165

470166

470167

470168

470169

470170

470171

470173

5/16" × UNC18 × 3"_Button Head Socket Bolt

3/8" × UNC16 × 1-3/4"_Hex Head Bolt

5/16" × UNC18 × 1-1/2"_Flat Head Socket Bolt

3/8" × UNC16 × 3/4"_Button Head Socket Bolt

M8 × P1.25 × 80L_Socket Head Cap Bolt

M8 × P1.25 × 25L_Flat Head Countersink Bolt

Motor Bottom Cover

Ø5 × 16L_Tapping Screw

1

1

1

1

1

1

1

1

1

2

1

1

4

1

2

2

6

1

5

2

1

4

2

470174

470175

470176

470177

Ø3.5 × 12L_Sheet Metal Screw

1/2" × UNC12 × 8.0T_Nyloc Nut

3/8" × UNC16 × 7.0T_Nyloc Nut

5/16" × UNC18 × 7.0T_Nyloc Nut

470178 M8 × P1.25 × 7.0T_Nyloc Nut

470179 Ø10 × 2.0T_Split Washer

470180 Ø8 × 1.5T_Split Washer

470181 Ø5 × 1.5T_Split Washer

470182 Ø19 × Ø10 × 1.5T_Flat Washer

470183 Ø10 × Ø25 × 2.0T_Flat Washer

470184 Ø8 × Ø18 × 1.5T_Flat Washer

2

2

4

4

1

4

8

4

2

470185 Ø50 × Ø13 × 3T_Nylon Washer (B)

470186 Ø24 × Ø10 × 3T_Nylon Washer (A)

470187

470188

Ø25 × Ø20 × Ø16 × Ø5 × 4.5H × 1.1T_Concave Washer

M5_Star Washer

4

4

2

4

8

4

470189 Ø5 × 19L_Tapping Screw 1

470190 13L_Wrench 1

470191 Ø4 × 12L_Sheet Metal Screw

470192

470194

Belt Guide

470193 Ø5 × 16L_Tapping Screw

Nylon Washer

12

2

28

2

470195 Cylinder 1

470196 M8 × P1.25 × 50L_Flat Head Countersink Bolt

470199 5/16" × UNC18 × 1/2"_Hex Head Bolt

2

8

4701100 Ø8 × Ø18 × 1.5T_Flat Washer

4701102 Combination M5 Allen Wrench & Phillips Head Screw Driver

4701103 M6 (66 × 86)_L Allen Wrench 1

4701104 Lubricant 1

4701105 Adjustment Foot Pad

4701111 Ø3.5 × 16L_Tapping Screw

4701112 Wire Tie Mount

4701113 Top Motor Cover Plate

4701114 1000m/m_Speed Adjustment Switch W/Cable(Upper)

4701115 1000m/m_Incline Adjustment Switch W/Cable(Upper)

4701116 Ø3 × 10L_Sheet Metal Screw

8

1

2

5

5

1

1

1

2

Customer Service 1-888-707-1880

Email: [email protected]

21 Dyaco Canada Inc. 2014

117

125

128

135

140

151

154

161

162

163

4701117 400m/m_Console Ground Wire

4701125 5/16" × UNC18 × 3/4"_Button Head Socket Bolt

4701128 M5 × P0.8 × 10L_Phillips Head Screw

4701135 Ø3 × 75L_Sheet Metal Screw

4701140 Ø4 × 19L_Sheet Metal Screw

4701151 400m/m_Audio Cable

4701154 1000m/m_Ground Wire

4701161 Rubber Foot

4701162 Controller Back Plate

4701163 Ø3 × 8L_Sheet Metal Screw

Customer Service 1-888-707-1880

Email: [email protected]

22 Dyaco Canada Inc. 2014

2

4

1

1

1

8

4

2

1

2

Parts Diagram

Customer Service 1-888-707-1880

Email: [email protected]

23 Dyaco Canada Inc. 2014

General Maintenance

BELT ADJUSTMENTS:

Treadbelt Tension Adjustment - Belt tension is not critical for most users. It is very important for joggers and runners in order to provide a smooth, steady running surface. Adjustment must be made from the right side of the rear roller in order to adjust tension with the 6 mm Allen wrench provided in the parts package. The adjustment bolt is located at the end of the right side rail as noted in diagram below.

Tracking /

Tension

Adjustment

Note: Adjustment is through small hole in end cap.

Tracking / Tension

Adjustment

Tighten the rear roller only enough to prevent slippage at the front roller. Turn the treadbelt tension adjusting bolt in increments of 1/4 turn and inspect for proper tension.

When an adjustment is made to the belt tension, you must also make a tracking adjustment to compensate for the change in belt tension. This is accomplished by turning both the tension and tracking Allen bolts an equal amount. This adjustment should be made by turning both bolts clockwise by no more than a 1/4 turn at a time.

DO NOT OVERTIGHTEN – Over tightening will cause belt damage and premature bearing failure.

TREADBELT TRACKING ADJUSTMENT:

The performance of your treadmill is dependent on the frame running on a reasonably level surface. If the frame is not level, the front and back roller cannot run parallel, and constant belt adjustment may be necessary.

The treadmill is designed to keep the treadbelt reasonably centered while in use. It is normal for some belts to drift near one side while the belt is running with no one on it. After a few minutes of use, the treadbelt should have a tendency to center itself. If, during use, the belt continues to move toward one side, adjustments are necessary.

Customer Service 1-888-707-1880

Email: [email protected]

24 Dyaco Canada Inc. 2014

TO SET TREADBELT TRACKING:

A 6 mm Allen wrench is provided to adjust the rear roller. Make tracking adjustments from the left and the right side .

Set belt speed at approximately 2 to 3 mph. A small adjustment can make a dramatic difference. Turn the bolt only a 1/4 turn and wait a few minutes for the belt to adjust itself. Continue to make

1/4 turns until the belt stabilizes in the center of the running deck. The belt may require periodic tracking adjustment depending on use and walking/running characteristics. Some users will affect tracking differently.

Expect to make adjustments as required to center the treadbelt. Adjustments will become less of a maintenance concern as the belt is used. Proper belt tracking is an owner responsibility common with all treadmills.

ATTENTION: DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING /

TENSION ADJUSTMENTS IS NOT COVERED UNDER THE WARRANTY.

BELT / DECK LUBRICATION:

Do not lubricate with other than Everlast approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Everlast. There are commercially available lube kits, but the only one currently approved by Everlast is

Lube-N-Walk. These kits come with an application wand that makes applying the lubrication easier. Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your treadmill. If the lubricant dries out, the friction between the belt and deck rises and places undue stress on the drive motor, drive belt and electronic motor control board, which could result in catastrophic failure of these expensive components. Failure to lubricate the deck at regular intervals may void the warranty.

The deck comes pre-lubricated and subsequent lubrication should be performed every

180 hours of use. To lubricate the deck with the tube of lubricant supplied it will be necessary to loosen the walking belt. Using the 6 mm allen wrench supplied, loosen the two rear roller adjustment bolts -- located in the rear end caps – enough to get your hand under the belt (5 –10 turns). Make sure to loosen both bolts the same amount of turns and also remember how many turns, because when finished you will need to tighten the bolts back to the point they were before.

Once the belt is loose, wipe the deck with a clean lint free cloth to remove any dirt. Apply the whole tube of lubricant onto the deck surface about 18 inches from the motor cover.

Squeeze out the contents of the tube across the deck (parallel to the motor cover) in about a one-foot long line, like toothpaste on a toothbrush. The one-foot line should be in the middle of the deck at approximately equal distance from both side edges of the belt.

You want the lubricant to be applied about the spot that your feet would hit the belt as you are walking. This should be about 18 inches from the motor cover, but you may want to walk on the treadmill before loosening the belt to note where your feet land on the belt. If you mostly run on the treadmill, the spot where your feet land may be different from walking. Once the lubricant is applied, tighten the rear roller bolts the same amount of turns as when you loosened them. Run the treadmill at about 6 mph without walking on it for about a minute or two to make sure the belt stays in the middle of the deck. If the belt tracks to one side then follow the belt tracking instructions to remedy. Now the deck is lubricated and you should walk, not run, on the treadmill immediately for at least 5 minutes to ensure the lubricant is evenly distributed. If you purchase a Lube-N-Walk kit, follow the instructions that come with it to apply the lubrication.

Customer Service 1-888-707-1880

Email: [email protected]

25 Dyaco Canada Inc. 2014

General Maintenance

WARNING: Always unplug your treadmill prior to cleaning in order to avoid electrical hazard or shock.

Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the edge of the belt and the area between the belt edge and frame. Also reach as far as practical directly under the belt edge. This should be done once a month to extend belt and bed life. Use water only - no cleaners or abrasives. A mild soap and water solution along with a nylon scrub brush will clean the top of the textured belt. Allow to dry before using.

Belt Dust - This occurs during normal break-in or until the belt stabilizes. Wiping excess off with a damp cloth will minimize buildup.

General Cleaning - Dirt, dust, and pet hair can block air inlets and accumulate on the running belt. On a monthly basis, vacuum underneath your treadmill to prevent buildup.

Once a year, you should remove the black motor hood and vacuum out dirt that may accumulate .

UNPLUG POWER CORD BEFORE THIS TASK.

Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a light application of car wax. Do not use aerosol sprays or pump bottles as they may deposit wax upon the walking or computer surface. Under no circumstances are you to use ammonia, oils, silicones, or any other compounds on the rubberized walking surface. The use of such materials may cause serious injury to the body and/or deteriorate the performance of the walking surface. Only clean the rubberized walking surface with a damp cloth (water only). From time-to-time the computer surface may collect dust or finger prints. The use of harsh chemicals will destroy the protective coating and cause a static build up that will damage the components. This surface may be cleaned with specially prepared chemicals found in most computer supply stores especially made for anti-static surfaces. It is strongly recommended that you purchase such a cleaning compound.

TREADMILL LUBRICATION

Your treadmill should require little maintenance other then periodically applying lubricant.

Lubricating under the treadbelt will ensure superior performance and extend its life expectancy.

HOW TO CHECK IF THE TREADBOARD REQUIRES LUBRICATION

Lift one side of the treadbelt and feel the top surface of the treadboard

If the surface is (slick) to the touch, then no further lubrication is required

If the surface is dry to the touch, apply one packet of lubricant or half of the bottle of lubricant.

Customer Service 1-888-707-1880

Email: [email protected]

26 Dyaco Canada Inc. 2014

RESET SWITCH RESETTING

If your treadmill looses power or will not start, check the reset switch located on the front of the motor cover.

If the white tab of the reset switch is not showing then the reset switch has not been tripped.

If the white tab of the reset switch is showing, the reset switch has tripped.

To reset the reset switch:

Remove the safety clip on console.

Press white tab of the reset switch in until it snaps back into place.

If the reset switch continues to trip - see treadbelt adjustment and treadbelt lubrication

SPEED SENSOR ADJUSTMENT

If the monitor does not display speed or distance the speed sensor and magnet may be misaligned.

Note: Always unplug your treadmill prior to cleaning in order to avoid electrical hazard or shock.

Follow these steps to check and realign.

Remove the motor cover

Check the spacing and alignment between the magnet on the right side of the front roller and the speed sensor on the frame. The spacing must be 1/8”.

Loosen screw and slide speed sensor in or out of clamp.

Retighten screw and replace the motor cover.

Customer Service 1-888-707-1880

Email: [email protected]

27 Dyaco Canada Inc. 2014

Service Checklist – Diagnosis Guide

Before contacting your dealer for aid, please review the following information. It may save you both time and expense. This list includes common problems that may not be covered under the treadmill’s warranty.

PROBLEM SOLUTION/CAUSE

Display does not light.

Tread-belt does not stay centered Treadmill belt hesitates when walk or run on.

Motor is not responsive after pressing start.

Treadmill will only achieve approximately 18 kph (12 mph) but

shows higher speed on display.

Tread-belt stops quickly/ suddenly when tether cord is pulled.

Treadmill trips on board 15 amp circuit.

Computer shuts off when console is touched (on a cold day) while walking/running.

House circuit breaker trips, but not the

treadmill circuit breaker.

1. Tether cord not in position.

2. Circuit breaker on front grill tripped. Push circuit breaker in until it locks.

3. Plug is disconnected. Make sure plug is firmly pushed into AC household wall outlet.

4. Household circuit breaker may be tripped.

5. Treadmill defect. Contact your dealer.

The user may be walking while favoring or putting more weight on either the left or right foot. If this walking pattern is natural, track the belt slightly offcenter to the side opposite from the belt movement. See General Maintenance section on

Treadbelt Tension. Adjust as necessary.

Contact the service department

This indicates motor should be receiving power to operate. Low AC voltage to treadmill. Do not use an extension cord. If an extension cord is required it should be as short as possible and heavy duty

16 gauge minimum. Low household voltage. Contact an electrician or your dealer. A minimum of 120 volt AC current is required.

High belt/deck friction. See General Maintenance section on lubrication.

High belt/deck friction. See General Maintenance.

Treadmill may not be grounded. Static electricity is

“crashing” the computer. Refer to Grounding

Instructions.

Need to replace the house breaker with a “High In- rush current” type breaker.

Customer Service 1-888-707-1880

Email: [email protected]

28 Dyaco Canada Inc. 2014

Troubleshooting

I. Engineering Mode

Remove the safety key and reinsert it after pressing the ENTER and STOP buttons together to enter the engineer mode. Press the ENTER button once to select roller diameter (60), km or miles, speed (0.5mph to 10mph) and incline (12). Press FAST button and SLOW button to change the value. Press the START button to finish. The treadmill begins to calibrate itself and will leave the engineering mode when the operation is completed.

II. What to do when error occurs

1. E0: Safety key is not inserted

2. E1: Missing speed signal

To clear: Check and make sure that speed signal connector is properly connected.

3. E2: Overloaded

To clear: Press the power switch to the OFF position and then back ON to clear the error message.

4. Er: Incline motor error (in the incline window)

To clear: Press the power switch to the OFF position and then back ON to clear the error message.

5. E4: Motor error

To clear: Check and make sure that motor cable is well connected and the power is stable.

Resume power to clear error message.

6. E6: Insufficient of power

To clear: Check if voltage is too low or if the controller has been damaged. Replace the controller if necessary.

Customer Service 1-888-707-1880 29 Dyaco Canada Inc. 2014

Email: [email protected]

Training guidelines

Exercise

Exercise is one of the most important factors in the overall health of an individual. Listed among its benefits are: x Increased capacity for physical work (strength endurance) x Increased cardiovascular (heart and arteries/veins) and respiratory efficiency x Decreased risk of coronary heart disease x Changes in body metabolism, e.g. losing weight x Delaying the physiological effects of age x Physiological effects, e.g. reduction in stress, increase in self-confidence, etc.

Basic Components of Physical Fitness

There are four all encompassing components of physical fitness and we need to briefly define each and clarify its role.

Strength is the capacity of a muscle to exert a force against resistance. Strength contributes to power and speed and is of great importance to a majority of sports people.

Muscular Endurance is the capacity to exert a force repeatedly over a period of time, e.g. it is the capacity of your legs to carry you 10 Km without stopping.

Flexibility is the range of motion about a joint. Improving flexibility involves the stretching of muscles and tendons to maintain or increase suppleness, and provides increased resistance to muscle injury or soreness.

Cardio-Respiratory Endurance is the most essential component of physical fitness. It is the efficient functioning of the heart and lungs

Aerobic Fitness

The largest amount of oxygen that you can use per minute during exercise is called your maximum oxygen uptake (MVo2). This is often referred to as your aerobic capacity.

The effort that you can exert over a prolonged period of time is limited by your ability to deliver oxygen to the working muscles. Regular vigorous exercise produces a training effect that can increase your aerobic capacity by as much as 20 to 30%. An increased MVO2 indicates an increased ability of the heart to pump blood, of the lungs to ventilate oxygen and of the muscles to take up oxygen.

Anaerobic Training

This means “without oxygen” and is the output of energy when the oxygen supply is insufficient to meet the body’s long term energy demands. (For example, 100 meter sprint).

The Training Threshold

This is the minimum level of exercise which is required to produce significant improvements in any physical fitness parameter.

Progression

As your become fitter, a higher intensity of exercise is required to create an overload and therefore provide continued improvement

Overload

This is where you exercise at a level above that which can be carried out comfortably. The intensity, duration and frequency of exercise should be above the training threshold and should be gradually increased as the body adapts to the increasing demands. As your fitness level improves, so the training threshold should be raised.

Working through your program and gradually increasing the overload factor is important.

Specificity

Different forms of exercise produce different results. The type of exercise that is carried out is specific both to the muscle groups being used and to the energy source involved.

There is little transfer of the effects of exercise, i.e. from strength training to cardiovascular fitness.

That is why it is important to have an exercise program tailored to your specific needs.

Reversibility

If you stop exercising or do not do your program often enough, you will lose the benefits you have gained. Regular workouts are the key to success.

Customer Service 1-888-707-1880

Email: [email protected]

30 Dyaco Canada Inc. 2014

Warm Up

Every exercise program should start with a warm up where the body is prepared for the effort to come. It should be gentle and preferably use the muscles to be involved later.

Stretching should be included in both your warm up and cool down, and should be performed after

3-5 minutes of low intensity aerobic activity or callisthenic type exercise.

Warm Down or Cool Down

This involves a gradual decrease in the intensity of the exercise session. Following exercise, a large supply of blood remains in the working muscles. If it is not returned promptly o the central circulation, pooling of blood may occur in the muscles

Heart Rate

As you exercise, so the rate at which your heart beat also increases. This is often used as a measure of the required intensity of exercise. You need to exercise hard enough to condition your circulatory system, and increase your pulse rate, but not enough to strain your heart.

Your initial level of fitness is important in developing an exercise program for you. If you are starting off, you can get a good training effect with a heart rate of 110-120 beats per minute(BPM). If you are fitter, you will need a higher threshold of stimulation.

To begin with, you should exercise at a level that elevates your heart rate to about 65 to 70% of your maximum. If you find this is too easy, you may want to increase it, but it is better to lean on the conservative side.

As a rule of thumb, the maximum heart rate is 220 minus your age. As you increase in age, so your heart, like other muscles, loses some of its efficiency. Some of its natural loss is won back as fitness improves.

The following table is a guide to those who are “starting fitness”.

Age 25 30 35 40 45 50 55 60 65

Target heart Rate

Beats per Minute 138 132 132 126 120 114 114 108 108

Pulse Count

The pulse count(on your wrist or carotid artery in the neck, taken with two index fingers)is done for ten seconds, taken a few seconds after you stop exercising. This is for two reasons: (a) 10 seconds is long enough for accuracy, (b) the pulse count is to approximate your BPM rate at the time you are exercising.

Since heart rate slows as you recover, a longer count isn’t as accurate.

The target is not a magic number, but a general guide. If you’re above average fitness, you may work quite comfortably a little above that suggested for your age group.

The following table is a guide to those who are keeping fit. Here we are working at about 80% of maximum.

Age

Target heart Rate

Beats per Minute 156 156 150 144 138 132 132 126 120

Don’t push yourself too hard to reach the figures on this table. It can be very uncomfortable if you overdo it.

Let it happen naturally as you work through your program. Remember, the target is a guide, not a rule, a little above or below is just fine.

Two final comments:(1) don’t be concerned with day to day variations in your pulse rate, being under pressure or not enough sleep can affect it;(2) your pulse rate is a guide, don’t become a slave to it.

Customer Service 1-888-707-1880

Email: [email protected]

31 Dyaco Canada Inc. 2014

Endurance Circuit Training

Cardiovascular endurance, muscle, strength, flexibility and coordination are all necessary for maximum fitness. The principle behind circuit training is to give a person all the essentials at one time by going through your exercise program moving as fast as possible between each exercise. This increases the heart rate and sustains it, which improves the fitness level. Do not introduce this circuit training effect until you have reached an advanced program stage.

Body Building

Is often used synonymously with strength training The fundamental principal here is OVERLOAD. Here, the muscle works against greater loads than usual. This can be done by increasing the load you are working against.

Patronization

This is the term used to vary your exercise program for both physiological and psychological benefits. In your overall program, you should vary the workload, frequency and intensity. The body responds better to variety and so do you. In addition, when you feel yourself getting “stale’, bring in periods of lighter exercise to allow the body to recuperate and restore its reserves. You will enjoy your program more and feel better for it.

Muscle Soreness

For the first week or so, this may be the only indication you have that you are on an exercise program. This, of course, does depend on your overall fitness level. A confirmation that you are on the correct program is a very slight soreness in most major muscle groups. This is quite normal and will disappear in a matter of days.

If you experience major discomfort, you may be on a program that is too advanced or you have increased your program too rapidly.

If you experience PAIN during or after exercise, your body is telling you something.

Stop exercising and consult your doctor.

What to Wear

Wear clothing that will not restrict your movement in any way while exercising. Clothes should be light enough to allow the body to cool. Excessive clothing that causes you to perspire more than you normally would while exercising, gives you no advantage. The extra weight you lose is body fluid and will be replaced with the next glass of water you drink. It is advisable to wear a pair of gym or running shoes or “sneakers”.

Breathing during Exercise

Do not hold your breath while exercising. Breathe normally as much as possible. Remember, breathing involves the intake and distribution of oxygen, which feeds the working muscles.

Rest periods

Once you start your exercise program, you should continue through to the end. Do not break off halfway through and then restart at the same place later on without going through the warm-up stage again.

The rest period required between strength training exercises may vary from person to person. This will depend mostly on your level of fitness and the program you have chosen. Rest between exercises by all means, but do not allow this to exceed two minutes. Most people manage with half minute to one minute rest periods

Customer Service 1-888-707-1880

Email: [email protected]

32 Dyaco Canada Inc. 2014

STRETCHING

Stretching should be included in both your warm up and cool down, and should be performed after 3-5 minutes of low intensity aerobic activity or callisthenic type exercise. Movements should be performed slowly and smoothly, with no bouncing or jerking. Move into the stretch until slight tension, not pain, is felt in the muscle and hold for 20-30 seconds. Breathing should be slow, rhythmical and under control, making sure never to hold your breath.

HEAD ROLLS

Rotate your head to the right for one count, feeling the stretch up the left side of your neck. Next rotate your head back for one count, stretching your chin to the ceiling and letting your mouth open. Rotate your head to the left for one count, and finally, drop your head to your chest for one count.

SHOULDER LIFTS

Lift your right shoulder up toward your ear for one count. Then lift your left shoulder up for one count as you lower your right shoulder.

SIDE STRETCHES QUADRICEPS STRETCH

Open your arms to the side and continue lifting With one hand against a wall for balance, them until they are over your head. Reach your right arm as far upward toward the ceiling as you can for one count. Feel the stretch up your right side. Repeat this action with your left arm. reach behind you and pull your right foot up.

Bring your heel as close to your buttocks as possible. Hold for 15 counts and repeat with left foot up.

Customer Service 1-888-707-1880

Email: [email protected]

33 Dyaco Canada Inc. 2014

INNER THIGH STRETCH

Sit with the soles of your feet together with your knees pointing outward. Pull your feet as close

Into your groin as possible. Gently push your knees towards the floor. Hold for 15 counts.

HAMSTRING STRETCHES

Sit with your right leg extended. Rest the sole of

TOUCHES

Slowly bend forward from your waist, letting

your back and shoulders relax as you stretch

toward your toes. Reach down as far as you

can and hold for 15 counts.

CALF / ACHILLES STRETCH

Lean against a wall with your left leg in front your left foot against your right inner thigh. Stretch your toe as far as possible. Hold for 15

of the right and your arms forward. Keep toward

your right leg straight and the left foot on the counts. Relax and then repeat with left leg floor then bend the left leg and lean forward extended. by moving your hips toward the wall. Hold, then repeat on the other side for 15 counts.

Customer Service 1-888-707-1880

Email: [email protected]

34 Dyaco Canada Inc. 2014

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement