ET-273 Big Button Trim Phone
READ THIS FIRST
We have designed your telephone to conform to federal
regulations and you can connect it to most telephone
lines. However, each device you connect to the phone
line draws power from it. This power draw is the device’s
Ringer Equivalence Number, or REN. The REN is on the
bottom of your phone.
If you are using more than one phone or other device on
the line, add up all the RENs. If the total is more than five
(or three in rural areas) your phones might not ring. If
ringer operation is impaired, remove one of the devices
from the line.
If your phone causes problems on the phone line, the
telephone company can disconnect your service. The
phone company tries to notify you in advance. If advance
notice is not practical, the telephone company notifies
you as soon as possible and advises you of your right to
file a complaint with the FCC.
The phone company can also make changes to its lines,
equipment, operations, or procedures that could affect
the phone’s operation. The phone company notifies you
in advance, so you can take the necessary steps to prevent interruption of your phone service.
FCC STATEMENT
Your telephone complies with Part 68 of FCC Rules. You
must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are on the bottom of your phone.
Note: You must not connect your telephone to:
• coin-operated systems
• party-line systems
• most electronic key phone systems
CARE
• Keep the phone dry.
• Handle the phone carefully. Do not drop it.
• Do not use or store the phone in temperature
extremes.
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects
in material and workmanship under normal use for one (1) year from the
date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY
IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT
OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty
lasts or the exclusion of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the
product and the RadioShack sales receipt as proof of purchase date to
any RadioShack store. RadioShack will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of
RadioShack. New or reconditioned parts and products may be used in
the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period.
You will be charged for repair or replacement of the product made after
the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal
usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack
Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or
(f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street,
6th Floor, Fort Worth, TX 76102
We Service What We Sell
• Keep the phone away from dust and dirt.
• Do not modify or tamper with the phone’s internal components. Doing so might invalidate the phone’s warranty and void your FCC authorization to operate it. If
the phone is not operating as it should, take it to your
local RadioShack store for assistance. If the trouble is
harming the phone lines, the phone company might
ask you to disconnect the telephone until you fix the
problem.
J
Tone or Pulse (Rotary) Dialing
J
J
32 Digit Redial
Handset Volume Control
J
J
Flash
J
Reset
Hearing Aid Compatible
04/99
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
11A99
ET-273
Big Button
Trim Phone
Printed in China
Owner’s Manual
43-577 A /591D E /592D E /593D E /599D E
MOUNTING THE PHONE
USING THE PHONE
Desk Mounting
Modular
Telephone
Jack
Wall Mounting
(with or without wall plate)
/16 "
3
Short
Line Cord
(Supplied)
Press the switchhook to disconnect a call.
Adjust the handset volume to a comfortable
listening level — LO (Low) or HI (High).
Set the ringer to sound a high- or
low-volume ring, or not to sound
at all. You can make calls with the
ringer off, and you can receive
thehear
memory
index
cardon
callsUse
if you
another
phone
to
record
important
phone
the same line ringing.
numbers.
Switch to TONE or PULSE to match the
type of service you have. If you have
pulse (rotary) service, you can switch to
TONE during a call to use tone services.
Press to hang up.
Press for special services.
Set to TONE or PULSE to match
the type of service you have.
If you have pulse (rotary) service,
you can switch to TONE during a
call to use tone services.
3 15/16"
3
/16"
Handset Holder
(wall mounting)
Plug the handset cord into
the jacks on the handset
and base.
Lift and Rotate 180°
Note: The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important operating and servicing
instructions included in the papers with
the telephone.
Press HOLD to place a call on hold, then you
can place the handset on the cradle. To return
to the call, press the switchhook or lift the handset from the cradle.
Set the ringer to sound or not. You can
make calls with the ringer off, and you
Use a
paper
cliphear
or other
can receive
calls
if you
another
pointed
object
to ringing.
lift the plastic
phone on
the same
line
cover off the number plate.
Then write your phone number
on the number plate and
Press FLASH to produce
a timed
switchhook sigreplace
the cover.
nal for special services such as Call Waiting.
Note: Use a pencil in case the
number changes.
Note: If you do not subscribe to any special services, pressing FLASH might disconnect the call.
Press RESET to end a call without returning the
handset to the cradle.
Press REDIAL to dial the last number dialed
(up to 32 digits).
Press REDIAL to dial the last number dialed
(up to 31 tone or 32 pulse digits).
1997,1999 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by Tandy Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement