Digital Proprietary Telephone
User Guide
Model No.
KX-T7667
Please read this guide before using and save for future reference.
Document Version: 2006-02
Features List
(CO)
Outside (CO) Line button Off-hook
(ICD Group)
Incoming Call Distribution Group button
C. Tone
Confirmation Tone
R.B. Tone
Ringback Tone
Feature
On-hook Feature number
(DSS)
Direct Station Selection button
Operation
Talk
Calling
To an extension extension no.
To an outside party
(CO) outside phone no.
Redial
Quick Dialing quick dial no.
One-touch
Dialing
To store
To dial
(CO)
2 desired no.
(max. 32 digits) assigned as a One-touch
Dialing button
Operator Call 0
To store
Personal
Speed Dialing To dial
3 0 personal speed dial no. (2 digits) desired no.
(max. 32 digits)
#
C. Tone personal speed dial no. (2 digits)
System
Speed Dialing
Doorphone Call
To dial
Automatic
Callback Busy
Call Hold system speed dial no. (3 digits)
3 1
To set
While hearing a busy tone
6
C. Tone
To answer from an idle extension
While hearing a callback ring doorphone no. (2 digits)
C. Tone
To cancel
4 6
C. Tone
To answer from an idle outside line
While hearing a callback ring outside phone no.
R.B. Tone
To hold
During a Conversation
To retrieve a call at the holding extension
(CO)
/ /
(ICD Group)
C. Tone
To retrieve an outside call from another extension
(CO)
— 2 —
Features List
Feature
Call Transfer
Off-hook Monitor
Operation
During a Conversation
C. Tone extension no.
(CO)
To an extension outside phone no.
To an outside party
To set /cancel
Useful Features
During a conversation using the handset
Call Park
Multiple Party
Conversation
To set
C. Tone
5 2 parking zone no.
(2 digits) Specified
Auto
C. Tone
To retrieve
5 2 stored parking zone no. (2 digits)
C. Tone
To add other parties during a conversation desired phone no.
C. Tone
Talk to the new party.
To leave a conference
C. Tone Talk with multiple parties.
C. Tone
Call Pickup
(DSS)
4
4
1
0 extension no.
group no. (2 digits)
Directed
Group C. Tone
Sending a Call
Waiting Tone
While hearing a busy tone
1 Wait for an answer.
Answering a
Call Waiting
To hold the current call then talk to the new party
*
/
(CO)
* Disregard this step if both parties are extensions.
— 3 —
Features List
Feature
Paging
Message
Waiting
Operation
Useful Features
To page
3 3 paging group no. (2 digits)
C. Tone
Announce.
To answer
4 3
C. Tone
To allow/deny a paged announcement
7 2 1 1 Deny
7 2 1 0 Allow
C. Tone
Wait for an answer.
C. Tone
To leave a message waiting indication
When the called extension is busy or does not answer
Caller
C. Tone
To call back
Called extension
Log-in/Log-out
To set
Setting Absent
Message
To cancel
7 3
7 3
6
6
1
0
For Log-in
For Log-out
ICD Group extension no.
Specified
All
C. Tone
Before Leaving Your Desk
7 5 0 message no.
(1-9) parameter
(if required)
#
7 5 0 0
Call
Forwarding
4
5
2
3
0
All calls
Busy
No answer
Busy/
No answer
Cancel
7 1
0
1
2
Both Calls
Outside Calls
Intercom Calls extension no.
OR
CO line access no.
outside phone no.
#
C. Tone
— 4 —
Features List
Feature
Extension
Dial Lock
Do Not Disturb
Operation
Before Leaving Your Desk
To lock
7 7 1
C. Tone
To unlock
7 7 0 extension PIN*
(max. 10 digits)
C. Tone
*PIN: Personal Identification Number
Setting the Telephone According to Your Needs
7 1
0 Both Calls
1 Outside Calls
2 Intercom Calls
1
0
Set
Cancel C. Tone
Extension
Feature Clear
7 9 0
C. Tone
To set
7 6 0 1 hour/minute
(4 digits)
0
OR
AM
1 PM
Timed
Reminder 0
1 once daily C. Tone
Receiving
Call Waiting
To cancel
7 6 0 0
C. Tone
To set/cancel for intercom calls
7 3 1
0
1
3
To stop or answer the ring back
/
No Call
Tone
Whisper OHCA
C. Tone
To set/cancel for outside calls
7 3 2
0
1
No tone
Tone C. Tone
•
For more details, refer to the Business Telephone System User Manual or consult your dealer.
•
You can change the flexible CO buttons to the feature buttons.
•
“Location of Controls” is shown on pages 6-7.
— 5 —
Location of Controls
LCD (Liquid Crystal Display) with Backlight
16
15
14
1
7
8
2
3
4
5
6
13
9
Headset Jack
1
2
3
4
5
PROGRAM: Used to enter and exit the personal programming mode.
CONF (Conference): Used to establish a multiple party conversation.
INTERCOM: Used to make or receive intercom calls.
FWD/DND (Call Forwarding/Do Not
Disturb): Used to perform Call
Forwarding or Do Not Disturb.
FLASH/RECALL: Used to disconnect the current call and make another call without hanging up.
10 11 12
Microphone
6
7
8
9
10
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation.
AUTO DIAL/STORE: Used for
System/Personal Speed Dialing or storing program changes.
REDIAL: Used to redial the last dialed number.
TRANSFER: Used to transfer a call to another party.
HOLD: Used to place a call on hold.
— 6 —
Location of Controls
11
12
13
14
SP-PHONE (Speakerphone): Used for the hands-free operation.
Navigator Key: Used to adjust the volume and select desired items for each function.
Flexible Outside (CO) Line Button:
Used to make or receive an outside call. Pressing this button seizes an idle outside line automatically. (Button assignment is required.) Also used as feature buttons. (Button assignment is required.)
PAUSE: Used to insert a pause during dialing.
15
16
MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication.
Message/Ringer Lamp: When you receive a call, the lamp flashes red.
When someone has left you a message, the lamp stays on red.
Setting
Speaker/Ringer/Handset/Headset Volume
Speaker Volume While in hands-free conversation
Ringer Volume
Handset/Headset Volume
While on-hook or receiving a call
While using the handset or headset
LCD Contrast/Headset Mode
While on-hook
LCD Contrast
0
Headset Mode
1
6 1
Press UP or DOWN.
Ring Tone
(CO)
/
Press Twice.
0
0
1
*1
8
*1 The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
LCD Backlight
While on-hook
0 4
0
1
2
Automatic
Always On
Always Off
*2
*2 Default setting: Automatic
— 7 —
Press UP or DOWN.
Settings on the Programming Mode
To enter the program mode To exit
Loop-CO
(L-CO)
Single-CO
(S-CO)
Direct Station
Selection
One-touch
Dialing
(CO)
(CO)
(CO)
(CO)
0
1
2
CO line no.
extension no.
desired no.
Incoming Call
Distribution
Group (ICD
Group)
(CO)
3 0
ICD Group no.
Preferred Line
Assignment-Outgoing
1 9
Preferred Line
Assignment-Incoming
2 0
Alternate Receiving-
Ring/Voice
2 1
Call Waiting for
Outside calls
Call Waiting
Selection
Call Waiting Tone
Type Selection
3
3
3
0
Extension PIN
[Personal Identification
Number]
(PIN-max.10 digits)
9 0
1
2
Station Programming
Data Default Set
# #
Operation
FWD/DND
- Both calls
FWD/DND
- Outside calls
FWD/DND
- Intercom calls
(CO)
(CO)
(CO)
Account
(CO)
4
4
4
4
1
2
3
8
Conference 4 9
(CO)
Log in/
Log-out (CO)
5 5
2
3
0
1
+ CO button no.
/
No line
An idle outside line
/
(CO)
A CO/ICD Group button
Intercom
0
1
2
0
1
2 + CO button no.
/
(CO)
No line
The longest ringing line
An assigned outside button
Ringing (Tone Call)
Directly (Voice Call)
Ring only
0 No (No tone)
/
1 Yes (Tone)
0 No Call
/
1 Tone
/ 3 Whisper OHCA
0 Tone 1
/ 1
To set an extension PIN
Tone 2 extension PIN same PIN
To change a stored extension PIN to new one stored extension PIN new PIN same PIN
— 8 —
Note
— 9 —
SERIAL NO.
(found on the bottom of the unit)
NAME OF DEALER
For your future reference
DATE OF PURCHASE
DEALER'S ADDRESS
DEALER'S TEL. NO.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985 http://www.panasonic.com/csd
2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX4007ZA
KK0306SY0