Backyard Discovery 65012 Wooden Swing Set Owner's Manual
Below you will find brief information for Wooden Swing Set 65012. The Wooden Swing Set 65012 is designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use. A maximum of 9 children is recommended for this swing set.
PDF
Download
Document
Advertisement
Advertisement
SOMERSET Wooden Swing Set Model: #65012 •• •• •• •• Owner's Manual Frequently Asked Questions Assembly Instructions Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system. Save this assembly manual for future reference in the event that you need to order replacement parts. INS-65012-B-Somerset 08/20/12 Made in China STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto. Si tiene preguntas sobre el ensamblaje o si necesita piezas debido a que faltan o están dañadas llame gratis a la línea de ayuda 1-800-856-4445 PLEASE READ THIS BEFORE STARTING ASSEMBLY POR FAVOR LEA ESTAS INSTRUCCIONES ANTES DE COMENZAR EL ENSAMBLAJE • • • • • • • • • • • READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND SAFETY INFORMATION. AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL HELP TO COMPLETE THE ASSEMBLY OF THE STRUCTURE. SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED. IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT DURING SHIPMENT. IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-800-856-4445 OR VISIT www.swingsetsonline.com LEA EL MANUAL DE ENSAMBLAJE COMPLETAMENTE, PRESTANDO ESPECIAL ATENCIÓN A LOS CONSEJOS ÚTILES IMPORTANTES Y A LA INFORMACIÓN SOBRE SEGURIDAD. DESPUÉS DE QUE HAYA LEÍDO EL MANUAL DE ENSAMBLAJE, PODRÁ DECIDIR SI NECESITA AYUDA PROFESIONAL PARA EFECTUAR EL ENSAMBLAJE DE LA ESTRUCTURA. SEPARE E IDENTIFIQUE TODAS LAS PIEZAS PARA COMPROBAR QUE DISPONE DE TODAS LAS PARTES INDICADAS. SI NO PUEDE ENCONTRAR TODAS LAS PIEZAS, REVISE EL MATERIAL DE EMPAQUE. ES POSIBLE QUE ALGUNAS PIEZAS PEQUEÑAS PUEDAN HABERSE CAÍDO ALLÍ DURANTE EL ENVÍO. MANTÉNGASE ALEJADO DE LOS NIÑOS MENORES A LA EDAD RECOMENDADA. SI TIENE PROBLEMAS CON EL ENSAMBLAJE O SI ALGUNA PIEZA FALTA O ESTÁ DAÑADA, LLAME A LA LÍNEA DE AYUDA AL 1-800-856-4445 O VISITE www.swingsetsonline.com PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL: 1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL 2 – DESRIPTION OF THE PART FROM THE PARTS LIST POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME: 1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL DE ENSAMBLAJE Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application. WARNING: This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You MUST read and follow all instructions in this manual before attempting to use this playcenter. WARNING: Children must NOT use this playcenter until unit has been completely assembled and inspected by an adult to insure set has been properly installed and anchored. Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety violations that could result in serious injury. This manual contains helpful information concerning Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play on the set. Before your children play on the set please review the Operation Instructions with them to help ensure their safety. PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS WHEN ORDERING PARTS. For Your Records: Please take time and fill out the information below. This information will be needed for warranty issues. Where Purchased: ____________________ Date of Purchase: ____________________ Installation Date: _____________________ Installed by: _________________________ Tracking Number: ____________________ Staple Receipt Here Tracking Number Reference Label Tracking ID number on the carton and back of the ID plate are included for tracking purposes associated with warranty claims. Rev5/09/12 Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 4. Provide enough room so that the children can use the equipment safely. For example, for structures with multiple play activities, a slide should not exit in front of a swing. 5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at play. 6. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. Additional suggestions in the Suggested Playground Surfacing Section. 7. Do not build your playset on top of surfacing material. 8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns. A slide that faces north will receive the least direct sunlight. 9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings or use a guardrail or barrier to separate the sandbox from the movement of the swings. Suggested Playground Surfacing Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Do not install loose fill surfacing over hard surfaces such as concrete or asphalt. Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials after assembly. If used properly these materials can absorb some of the impact of a child’s fall. All surface material should extend a minimum of 6 feet in all directions around the play area. Do not apply playground surfacing until after the unit is completely constructed. Playset should not be built on top of surfacing. Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require a professional and are not “do-it-yourself” projects. Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. Rev5/09/12 Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth Wood Chips Double-Shredded bark mulch Engineered Wood Fibers Fine Sand Coarse Sand Fine Gravel Medium Gravel 6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 9" (228mm) 10' (3.05m) 10' (3.05m) 7' (2.13m) 5' (1.52m) 5' (1.52m) 7' (2.13m) 5' (1.52m) 12" (304mm) 11' (3.35m) 11' (3.35m) >12' (3.66m) 9' (2.74m) 6' (1.83m) 10' (3.05m) 6' (1.83m) to 9" (228mm) 10' (3.05m) 7' (2.13m) 6' (1.83m) 5' (1.52m) 4' (1.22m) 6' (1.83m) 5' (1.52m) Shredded Tires* 10-12' (3.0-3.6m) N/A N/A N/A *This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers. The tests reported critical heights, which varied from 10 feet to greater than 12 feet. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292. Operating Instructions: NOTE: Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children. 1. This Playcenter is designed for specific number of occupants whose combined weight should not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall height and recommended play area is also available in the Basic Setup Dimensions section of the manual for the specific unit. 2. On-site adult supervision is required. 3. Instruct children not to walk close to, in front of, behind, or between moving swings or other moving playground equipment. 4. Instruct children to sit in and never stand on swings 5. Instruct children not to twist the chains and ropes and not to loop them over the top support bar, since this may reduce the strength of the chain or rope. 6. Instruct children not to jump from swings or other playground equipment in motion. 7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury. 8. Instruct and teach children to sit in the center of the swings with their full weight on the seats. 9. Instruct children not to use the equipment in a manner other than intended. 10. Instruct children to always go down slides feet first. Never slide head first. 11. Instruct children to look before they slide to make sure no one is at the bottom. 12. Instruct children to never run up a slide, as this increases their chances of falling. 13. The parents should dress children appropriately. (Examples would include the use of wellfitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is potentially hazardous while using equipment). 14. Instruct children not to climb when the equipment is wet. 15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or slide. 16. Instruct children to never crawl or walk across the top of monkey bars. 17. Instruct children to never crawl on top of a fort roof. Rev5/09/12 Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21. Instruct children to never slide down the swing chain. 22. Instruct children to remove their bike or other sports helmet before playing on playground equipment. Maintenance Instructions: At the beginning of each play season: • Tighten all hardware. • Lubricate all metallic moving parts per manufacturer’s instructions. • Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. • Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. • Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting the requirements of 16 CFR 1303. • Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. • Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Twice a month during play season: • Tighten all hardware. • Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. • Once a month during play season. • Lubricate all metallic moving parts per manufacturer’s instructions. • Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. At the end of each play season or when the temperature drops below 32° F: • Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Rev5/09/12 Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your playset with stain regularly, to help prevent severe checking/splitting and other weather damage. • A waterbourne transparent stain has been applied to your playset. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any “rough” spots on your playset. Please not this is a requirement of your warranty. • Assembling and maintaining the playset on a level location is very important. As your children play, your playset will slowly dig its way into the soil, and it is very important that it settles evenly. Make sure the playset is level and true one each year or at the beginning of each play season. Disposal Instructions: When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded. Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’. Please see our warranty for more information about damaged and missing part replacement coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased. Rev5/09/12 Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292. There are different types of surfacing to choose from; whichever product you select, follow these guidelines: X3.1.1 Loose-Fill Materials: X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth. X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface – does not need any protective surfacing. X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to account for water drainage. X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loosefill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the surfacing. X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt. X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces. X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects. X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height – vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below – of your play equipment. X3.1.4.3 Check the protective surfacing frequently for wear. X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to: X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions. X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended. 9 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772. Rev5/09/12 Owner’s Manual Play Set The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility. The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428. Rev5/09/12 www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.swingsetsonline.com. 9. The playset seems to rock or sway too much. What’s wrong? Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes provided. 10. The 2”x4” boards do not measure 2”x 4”. Why not? In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the playset. 11. The end beam is not straight up and down. Why not? This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting. 12. The S-hooks for the swings won’t close. What is wrong? Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do this on anything that will dent such as metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close. For more information and frequently asked questions, please refer to our website at www.swingsetsonline.com. Rev5/20/10 BRS Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Square) (Level 24") (Tape Measure) (Cordless Drill or Electric Drill) (Phillips Screw Driver) (1/8" & 3/8" Drill Bits) (Claw Hammer) (Drill Attachments: Socket Driver) (Rubber Mallet - Optional) (Ladder) (An Adult w/ an Adult Helper) Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 15'-3 7/8" [4.7] 10'-9 5/8" [3.3] 6' [1.8] Safe Play Zone General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use. A maximum of 9 children is recommended for this swing set. 6'-3 1/4" [1.9] Important Assembly Notes 8'-10 5/16" [2.7] Safe play height: 14'-11 1/2" [2.7 m] Maximum fall height: 6'-4 1/2" [1.9 m] 1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square. 2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member, and place caps over exposed bolts snug to the nut. 3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when sorting your wood and hardware. Assembly will be made easier if items are sorted by phase. 4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using incorrect hardware may result in improper assembly. 5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer. Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut. DO NOT over tighten. 6) Read the steps of each phase thoroughly. The written steps may include important information not shown in the illustrations. Parts Identification Wood Components (NOT TO SCALE) E1 - UPRIGHT - W101261 (1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E2 - UPRIGHT - W101260 (2) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E3 - UPRIGHT - W101256 (1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E77 - ANGLE BRACE - W100991 (2) 1 3/8"x3 3/8"x74 3/8" (36x86x1890) E82 - LEFT RAIL - W101127 (1) 1 3/8"x3 3/8"x48 3/4" (36x86x1239) E83 - RIGHT RAIL - W101128 (1) 1 3/8"x3 3/8"x48 3/4" (36x86x1239) F71 - STANDARD ANGLE BRACE - W100689 (6) 1 3/8"x2 3/8"x13" (36x60x330) H1 - SERVING SHELF SUPPORT - W101604 (1) 1"x3 3/8"x30 3/4" (24x86x780) H3 - SERVING BOARD SUPPORT - W101606 (2) 1"x3 3/8"x3 3/8" (24x86x86) H4 - BENCH SEAT SUPPORT - W102470 (2) 1"x3 3/8"x6 1/2" (24x86x166) H5 - BENCH UPRIGHT - W102471 (2) 1"x3 3/8"x11 3/4" (24x86x300) H6 - BENCH GROUND BOARD - W102472 (2) 1"x3 3/8"x18 1/8" (24x86x460) H74 - LEFT UPRIGHT - W100608 (1) 1"x3 3/8"x50 3/4" (24x86x1290) H75 - RIGHT UPRIGHT - W100609 (1) 1"x3 3/8"x50 3/4" (24x86x1290) Parts Identification Wood Components (NOT TO SCALE) H76 - LADDER RUNG - W100611 (4) 1"x3 3/8"x18 1/8" (24x86x460) H79 - END SUPPORT - W100992 (1) 1"x3 1/2"x42" (24x86x1072) H80 - GROUND BOARD - W100990 (1) 1"x3 3/8"x87 3/8" (24x86x2218) J1 - WINDOW LEDGE - W100709 (1) 1"x2 3/8"x29 1/2" (24x60x750) J2 - END FLOOR CLEAT - W100710 (4) 1"x2 3/8"x3 3/8" (24x60x86) J3 - FLOOR JOIST - W100984 (1) 1"x2 3/8"x60 1/8" (24x60x1528) K1 - ROOF SWING BEAM SUPPORT - W100682 (1) 5/8"x5 1/4"x51 5/8" (16x134x1310) K2 - ROOF SUPPORT - W100683 (1) 5/8"x5 1/4"x51 5/8" (16x134x1310) K3 - SERVING BOARD - W101605 (1) 5/8"x5 1/4"x28 3/4" (16x134x729) K4 - FLOOR RAIL - W103700 (1) 5/8"x5 1/4"x60 1/8" (16x134x1528) K5 - FLOOR RAIL - W103705 (1) 5/8"x5 1/4"x30" (16x134x762) K9-1 - WALL BOARD - W100713 (6) 3/8"x3 3/8"x15 3/4" (11x86x400) K9-2 - WALL BOARD - W100712 (4) 3/8"x3 3/8"x30 1/4" (11x86x768) Parts Identification Wood Components (NOT TO SCALE) K9-3 - WALL BOARD - W101257 (2) 3/8"x3 3/8"x42" (11x86x1068) K9-4 - WALL BOARD - W101239 (2) 3/8"x3 3/8"x37 3/8" (11x86x950) K9-5 - WALL BOARD - W101259 (6) 3/8"x3 3/8"x21 3/8" (11x86x544) L2 - GROUND BOARD - W100684 (2) 5/8"x4 3/8"x60 1/8" (16x112x1528) L3 - GROUND BOARD - W101602 (1) 5/8"x4 3/8"x46 7/8" (16x112x1191) L5 - GROUND BOARD - W100686 (1) 5/8"x4 3/8"x30" (16x112x762) L6 - ARCHED RAIL - W100694 (1) 5/8"x4 3/8"x60 1/8" (16x112x1528) L7 - SCULPTURED RAIL - W100695 (1) 5/8"x4 3/8"x60 1/8" (16x112x1528) L8 - SCULPTURED RAIL - W101240 (1) 5/8"x4 3/8"x35 1/2" (16x112x902) L9 - END FLOOR BOARD - W102863 (2) 5/8"x4 3/8"x29 7/8" (16x112x760) M1 - TENT SUPPORT - W101601 (1) 5/8"x3 3/8"x59 1/4" (16x86x1504) M2 - BENCH SEAT - W102469 (2) 5/8"x3 3/8"x27 3/8" (16x86x694) M3 - TARP SUPPORT - W100692 (2) 5/8"x3 3/8"x60 1/8" (16x86x1528) M4 - TARP TOP SUPPORT - W100693 (1) 5/8"x3 3/8"x60 1/8" (16x86x1528) Parts Identification Wood Components (NOT TO SCALE) M5 - FACE BOARD - W101599 (2) 5/8"x3 3/8"x43 1/8" (16x86x1094) M6 - LOWER FACE BOARD - W101598 (2) 5/8"x3 3/8"x38 5/8" (16x86x982) M7 - WALL BOARD - W100708 (1) 5/8"x3 3/8"x35 1/4" (16x86x895) M8 - WALL RAIL - W100700 (1) 5/8"x3 3/8"x35 7/8" (16x86x910) M9 - ANGLE BRACE - W100696 (1) 5/8"x3 3/8"x35 5/8" (16x86x904) M10 - SAFETY BOARD - W100701 (1) 5/8"x3 3/8"x33 7/8" (16x86x860) M11 - UPPER FACE BOARD - W102866 (2) 5/8"x3 3/8"x26 5/8" (16x86x676) M12 - ROCK WALL ARCH BOARD - W102862 (1) 5/8"x3 3/8"x30" (16x86x762) M13 - FLOOR RAIL - W102867 (1) 5/8"x3 3/8"x60 1/8" (16x86x1528) M14 - FLOOR SUPPORT BOARD - W101269 (1) 5/8"x3 3/8"x30" (16x86x762) M16 - TARP SUPPORT - W101237 (1) 5/8"x3 3/8"x29 1/8" (16x86x740) M17 - PICKET - W100705 (4) 5/8"x3 3/8"x27 1/8" (16x86x690) M73 - REAR SUPPORT - W100610 (1) 5/8"x3 3/8"x19 1/4" (16x86x488) Parts Identification Wood Components (NOT TO SCALE) M77 - SLIDE BRACE - W100544 (1) 5/8"x3 3/8"x17 1/4" (16x86x438) M78 - CENTER SLIDE BRACE - W100545 (2) 5/8"x3 3/8"x17 1/4" (16x86x438) M81 - ROCK WALL BOARD - W101130 (8) 5/8"x3 3/8"x22 3/8" (16x86x568) M82 - ROCK WALL BOARD - W101131 (3) 5/8"x3 3/8"x22 3/8" (16x86x568) M83 - ROCK WALL BOARD - W101132 (3) 5/8"x3 3/8"x22 3/8" (16x86x568) N72 - ROCK WALL END BOARD - W101129 (1) 5/8"x2 3/8"x23 5/8" (16x60x600) SB74 - SWING BEAM EXTENDED - W102419 (1) 2"x5 1/4"x89 1/2" (50x134x2274) SP1 - FLOOR SUPPORT CLEAT - W100711 (2) 1"x1"x53 3/8" (24x24x1356) W71 - SWING BEAM SUPPORT - W102420 (1) 2"x3 3/8"x49 5/8" (50x86x1260) (3) FP1 - FLOOR PANEL - W102861 (2) WP1 - WALL PANEL - W102865 Parts Identification Hardware (11) AA - LAG SCREW WH 5/16x2-1/2 - H100028 (7) AY - BOLT PTH 1/4x1 - H100061 (32) Z - LAG SCREW WH 5/16x2 - H100027 (11) CM - BOLT WH 5/16x1/2 - H100115 (16) BG - T-NUT 5/16 - H100074 (26) BE - T-NUT 1/4 - H100072 (8) F - BOLT WH 5/16x1 - H100008 (96) AC - WASHER LOCK EXT 8x19 - H100030 (51) AD - WASHER LOCK EXT 12x19 - H100031 (3) G - BOLT WH 5/16x1-1/4 - H100009 (25) H - BOLT WH 5/16x1-1/2 - H100010 (18) B - NUT BARREL WH 5/16x5/8 - H100004 (38) D - NUT BARREL WH 5/16x7/8 - H100005 (6) J - BOLT WH 5/16x1-3/4 - H100011 (2) AN - BOLT HEX 5/16x2-3/4 - H100047 (13) K - BOLT WH 5/16x2 - H100012 (2) M - BOLT WH 5/16x2-1/2 - H100014 (1) KA - BOLT WH 5/16x4-1/2 - H100021 (4) AG - BOLT HEX 5/16x1 - H100040 (7) CY - SCREW PWH 8x5/8 - H100128 Parts Identification Hardware (28) CG - WASHER LOCK INT 8x15 - H100108 (13) CT - SCREW TAPPING 8x1/2 - H100123 (15) CE - WASHER FLAT 9x18 - H100106 (2) CH - SCREW TAPPING 14x1-1/2 - H100109 (2) - T-40 Torx Wrench - A100041 (61) BN - SCREW PFH 8x1 - H100085 (59) BR - SCREW PFH 8x1-1/8 - H100088 (4) BX - WASHER SPLIT 5/16 - H100095 (24) BQ - SCREW PFH 8x1-1/4 - H100087 (186) BP - SCREW PFH 8x1-1/2 - H100086 (28) BS - SCREW PFH 8x1-3/4 - H100089 (2) - T-40 Torx Bit - A100042 (39) CK - SCREW PFH 8x2 - H100111 (9) BV - SCREW PFH 8x2-1/4 - H100091 (26) BW - SCREW PFH 8x3 - H100092 (15) CD - WASHER FLAT 8x27 - H100105 (9) CJ - NUT LOCK 5/16 - H100110 (7) CB - WASHER SAFETY 17x30 - H100103 (6) BZ - SWING HANGER QUICK LINK - H100099 Parts Identification Hardware (19) AZ - BOLT PTH 1/4x1-1/4 - H100062 (2) - T-30 Torx Bit - H100147 (2) KT - BOLT WH 1/4x1" - H100137 (2) C - NUT BARREL WH 5/16x1-1/2 - H100006 (7) KW - WASHER LOCK EXT 8x15 - H100139 (7) KS - NUT BARREL WH 1/4x5/8" - H100136 (2) - T-30 Torx Wrench - H100114 (4) KY - BOLT WH 1/4x1/2" - H100141 Parts Identification Accessories (NOT TO SCALE) (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 (1) TN - TRAPEZE WITH HARDWARE YELLOW - A100334 (1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (1) EM - SLIDE BED 8' YELLOW - A100056 FA - QUICK LINK (4) -A100069 HC - BYD ID TAG (LARGE) 2011 WITH (1) AGES -A100164 (2) FB - SWING SEAT YELLOW - A100070 - L BRACKET 54x67 (2) EJ -A100053 (4) EA - HAND GRIP YELLOW PLASTIC -A100043 - L BRACKET 66x66x127 (2) GD -A100140 (6) KC - METAL GROUND STAKE BROWN - A100178 (2) FW - CHAIN GREEN 31" - A100112 (4) EZ - CHAIN GREEN 51.25" - A100068 (1) HY - TARP 1522x2119 - A100062 Parts Identification Accessories (NOT TO SCALE) (2) EV - CLIMBING ROCK - GREEN - A100064 (2) GA - CLIMBING ROCK - YELLOW - A100137 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 (2) GB - CLIMBING ROCK - BLUE - A100138 (3) GC - CLIMBING ROCK - RED - A100139 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) SR - "B" REVISION TAG - A100315 (1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 4 FT GREEN EXTENDED SWING BEAM WITH TRAPEZE STEP 1 GD ATTACH (2) GD BRACKETS TO SB74 SWING BEAM USING 2-3/4" BOLT, FLAT WASHERS AND 5/16" LOCK NUT, AS SHOWN. ATTACH TB AND TC SWING BEAM EXTENSION BRACKETS TO SB74 SWING BEAM USING 13/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN. SB74 FINGER TIGHTEN ONLY AT THIS TIME. TC TB (3) (3) BOLT WH 5/16x1-3/4 BOLT HEX (2) 5/16x2-3/4 NUT BARREL WH 5/16x7/8 (4) WASHER FLAT 8x27 (2) NUT LOCK 5/16 (1) W71 - SWING BEAM SUPPORT - W102420 2"x3 3/8"x49 5/8" (50x86x1260) (1) (2) E77 - ANGLE BRACE - W100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) H80 - GROUND BOARD - W100990 1"x3 3/8"x87 3/8" (24x86x2218) (1) H79 - END SUPPORT - W100992 1"x3 1/2"x42" (24x86x1072) STEP 2 ATTACH H80 GROUND BOARD TO (2) E77 ANGLED SUPPORT BOARDS USING 2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN. (4) W71 ATTACH (2) E77 ANGLED SUPPORT BOARDS TO W71 SUPPORT USING 4- 1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN. (1) BOLT WH 5/16x4-1/2 (2) ATTACH H79 BOARD TO W71 BOARD USING 2" LAG SCREWS AND LOCK WASHERS. NEXT, SECURE THE ENDS OF H79 BOARD TO E77 ANGLED SUPPORTS USING 2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN. (5) LAG SCREW WH 5/16x2 NUT BARREL WH 5/16x7/8 WASHER WASHER (7) LOCK EXT (5) LOCK EXT 12x19 8x19 E77 E77 H79 H80 BOLT WH 5/16x2 STEP 3 INSERT W71 BOARD INTO TB AND TC BRACKET OPENING AND SECURE USING 1-3/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN. (2) BOLT WH 5/16x1-3/4 (2) BOLT WH 5/16x2-1/2 INSERT 2-1/2" BOLTS, LOCK WASHERS AND 1-1/2" BARREL NUTS INTO THE EDGE OF W71 BOARD, AS SHOWN. (2) NUT BARREL WH 5/16x7/8 NUT BARREL (2) WH 5/16x1-1/2 WASHER WASHER (2) LOCK EXT (2) LOCK EXT 12x19 8x19 SB74 TB TC W71 STEP 4 INSERT (6) SWING HANGER QUICK LINK INTO SB74 SWING BEAM USING SAFETY WASHERS, FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN. (6) NUT LOCK 5/16 (6) WASHER FLAT 8x27 (6) WASHER SAFETY 17x30 SB74 (6) SB74 SWING HANGER QUICK LINK 8 FOOT SLIDE ASSEMBLY PHASE 1 STEP 1 TOP ● PLACE SLIDE BRACE CENTERED ON THE BOTTOM 1/4" FROM THE EDGE. TRANSFER HOLES ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT. ● ATTACH SLIDE BRACE TO SLIDE USING HARDWARE SHOWN. QTY 1 3 3 3 1 DESCRIPTION SLIDE BRACE BOLT WH 5/16x1/2 NUT BARREL WH 5/16x5/8 WASHER LOCK EXT 12x19 SLIDE BED 8' YELLOW (SEE SLIDE ASSEMBLY INSTALLATION STEP FOR TOP MOUNTING HOLE DRILLING LOCATIONS). BOTTOM SLIDE BED 8' YELLOW NUT BARREL WH 5/16x5/8 WASHER LOCK EXT 12x19 M77 SLIDE BRACE BOLT WH 5/16x1/2 USE M77 SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY. REV 8/02/11 BRS 8 FOOT SLIDE ASSEMBLY PHASE 2 STEP 2 ● PLACE 1 SLIDE RAIL ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). PUT SLIDE SUPPORT BOTTOM INTO THE SUPPORT POCKET AT THE BOTTOM OF THE RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY. SECURE USING (12) 3" WOOD SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN BELOW. ● PLACE THE OTHER SLIDE RAIL ON A FLAT SURFACE WITH THE SLIDE CAVITY UP. HAVE A HELPER HOLD THE TOP END OF SLIDE BED AND BEGIN INSERTING THE SLIDE BED AND SLIDE BRACES INTO THE CAVITY AND SUPPORT POCKETS STARTING AT THE BOTTOM OF SLIDE AND WORKING UP TO THE TOP(FIG. 2). SECURE USING (12) 3" WOOD SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN BELOW. SLIDE RAIL 8' GREEN RIGHT NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. M78 CENTER SLIDE BRACE SLIDE RAIL 8' GREEN LEFT QTY DESCRIPTION 2 24 1 1 CENTER SLIDE BRACE SCREW PFH 8x3 SLIDE RAIL 8' GREEN RIGHT SLIDE RAIL 8' GREEN LEFT SCREW PFH 8x3 FIG. 1 FIG. 2 TIP: A HELPER IS REQUIRED FOR THIS PHASE. (1) E82 - LEFT RAIL - W101127 1 3/8"x3 3/8"x48 3/4" (36x86x1239) (8) M81 - ROCK WALL BOARD - W101130 5/8"x3 3/8"x22 3/8" (16x86x568) (3) E83 - RIGHT RAIL - W101128 1 3/8"x3 3/8"x48 3/4" (36x86x1239) (1) (3) M83 - ROCK WALL BOARD - W101132 5/8"x3 3/8"x22 3/8" (16x86x568) M82 - ROCK WALL BOARD - W101131 5/8"x3 3/8"x22 3/8" (16x86x568) 4 FT ROCK WALL ASSEMBLY STEP 1 ASSEMBLE SLATS TO RAILS AS SHOWN. NOTE THE ORIENTATION OF THE SLATS AND ARRANGE AS SHOWN. ATTACH TOP BOARD FIRST. USING SLATS AS A TEMPLATE, PILOT DRILL USING A 1/8" DRILL BIT. FAILURE TO PILOT DRILL MAY RESULT IN BOARD SPLITTING. (56) SCREW PFH 8x1-1/2" M81 M82 M81 M81 M83 M81 M82 M81 M83 M81 M83 M82 TOP M81 START HERE. E82 E83 (1) N72 - ROCK WALL END BOARD - W101129 5/8"x2 3/8"x23 5/8" (16x60x600) 4 FT ROCK WALL ASSEMBLY STEP 2 USING N72 ROCK WALL ENDBOARD AS A TEMPLATE, PILOT DRILL USING 1/8" DRILL BIT AND ATTACH N71 TO TOP OF E82 AND E83 UPRIGHT RAILS USING (2) 1-1/2" WOOD SCREWS, AS SHOWN. FAILURE TO PILOT DRILL MAY RESULT IN BOARD SPLITTING. (2) E82 N72 TOP E83 SCREW PFH 8x1-1/2" (2) GA - CLIMBING ROCK - YELLOW - A100137 (2) EV - CLIMBING ROCK - GREEN - A100064 (3) GC - CLIMBING ROCK - RED - A100139 (2) GB - CLIMBING ROCK - BLUE - A100138 4 FT ROCK WALL ASSEMBLY STEP 3 FLIP ROCK WALL ASSEMBLY OVER ON IT'S FRONT SURFACE AND INSTALL (18) 1/4" T-NUTS WITH A HAMMER. (18) FLIP ROCK WALL ASSEMBLY SO THAT FRONT SURFACE IS SHOWING AND ATTACH CLIMBING ROCKS TO ROCK WALL BOARDS USING (18) 1-1/4" BOLTS AND LOCK WASHERS, AS SHOWN. EV BOLT PTH 1/4x1-1/4 (18) WASHER LOCK INT 8x15 (18) T-NUT 1/4 GC GC GA GB EV GB GA GC 4 Ft Ladder Phase 1 & 2 Phase Notes • Assemble with hardware as shown. • Center rungs in rail grooves. QTY 1 DESCRIPTION LEFT UPRIGHT LABEL H74 4 8 LADDER RUNG SCREW PFH 8x2 H76 SCREW PFH 8x2 H74 H76 QTY 1 8 DESCRIPTION RIGHT UPRIGHT SCREW PFH 8x2 H75 SCREW PFH 8x2 LABEL H75 4 Ft Ladder Phase 3 Phase Notes • Assemble with hardware as shown. M73 SCREW PFH 8x2 QTY 1 4 DESCRIPTION REAR SUPPORT SCREW PFH 8x2 LABEL M73 M13 - FLOOR RAIL - W102867 5/8"x3 3/8"x60 1/8" (16x86x1528) (1) E1 - UPRIGHT - W101261 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) K4 - FLOOR RAIL - W103700 5/8"x5 1/4"x60 1/8" (16x134x1528) (2) E2 - UPRIGHT - W101260 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) L2 - GROUND BOARD - W100684 (1) M7 - WALL BOARD - W100708 5/8"x3 3/8"x35 1/4" (16x86x895) 5/8"x4 3/8"x60 1/8" (16x112x1528) (1) E3 - UPRIGHT - W101256 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) L7 - SCULPTURED RAIL - W100695 5/8"x4 3/8"x60 1/8" (16x112x1528) (1) (1) M8 - WALL RAIL - W100700 5/8"x3 3/8"x35 7/8" (16x86x910) (1) L6 - ARCHED RAIL - W100694 5/8"x4 3/8"x60 1/8" (16x112x1528) STEP 1 LAY TWO E2 AND E3 FORT UPRIGHTS FLAT ON GROUND. ATTACH L2 GROUND BOARD TO E2 AND E3 FORT UPRIGHTS USING (4) 1-1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS. BOLT WH 5/16x1-1/2 (8) (4) ATTACH K4 FLOOR RAIL TO E2 AND E3 FORT UPRIGHTS USING (4) 2" BOLTS, LOCK WASHERS AND 5/16" T-NUTS. ATTACH L7 SCULPTURED RAIL TO E2 AND E3 FORT UPRIGHTS USING (4) 1-1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS. (8) (12) L7 E2 WASHER LOCK EXT 12x19 (4) L2 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 (8) K4 BOLT WH 5/16x2 T-NUT 5/16 E3 STEP 2 LAY TWO E1 AND E2 FORT UPRIGHTS FLAT ON GROUND. ATTACH L2 GROUND BOARD TO E1 AND E2 FORT UPRIGHTS USING (4) 1-1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS. BOLT WH 5/16x2 (4) (2) BOLT WH 5/16x1 (8) BOLT WH 5/16x1-1/2 ATTACH M13 FLOOR RAIL TO E1 AND E2 FORT UPRIGHTS USING (4) 2" BOLTS, LOCK WASHERS AND 5/16" T-NUTS. ATTACH L6 ARCHED RAIL TO E1 AND E2 FORT UPRIGHTS USING (4) 1-1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS. ATTACH M7 WALL BOARD TO M2 FLOOR RAIL AND L6 ARCHED RAIL USING (2) 1" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS. ATTACH M8 WALL RAIL TO THE OUTSIDE OF E1 AND TO THE INSIDE OF M7 WALL BOARD USING (2) 1-3/4" WOOD SCREWS AND (2) 1-1/8" WOOD SCREWS, AS SHOWN. (2) SCREW PFH 8x1-3/4 (2) L6 (8) NUT BARREL WH 5/16x7/8 (4) M8 E1 M13 (14) M7 WASHER LOCK EXT 8x19 (10) L2 E2 (2) NUT BARREL WH 5/16x5/8 SCREW PFH 8x1-1/8 T-NUT 5/16 WASHER LOCK EXT 12x19 (1) K1 - ROOF SWING BEAM SUPPORT - W100682 5/8"x5 1/4"x51 5/8" (16x134x1310) (1) K5 - FLOOR RAIL - W103705 5/8"x5 1/4"x30" (16x134x762) (1) (2) M9 - ANGLE BRACE - W100696 5/8"x3 3/8"x35 5/8" (16x86x904) (1) M10 - SAFETY BOARD - W100701 5/8"x3 3/8"x33 7/8" (16x86x860) M5 - FACE BOARD - W101599 5/8"x3 3/8"x43 1/8" (16x86x1094) (1) L3 - GROUND BOARD - W101602 5/8"x4 3/8"x46 7/8" (16x112x1191) STEP 3 USING A HAMMER, INSTALL (4) 5/16" T-NUTS INTO THE HOLES PROVIDED ON THE INSIDE OF K1 ROOF SWING BEAM SUPPORT AND (2) 5/16" T-NUTS INTO THE HOLES PROVIDED ON THE OUTSIDE SURFACE OF K1 SUPPORT, AS SHOWN. USING M5 FACE BOARDS AS A TEMPLATE, PILOT DRILL USING AN 1/8" DRILL BIT AND ATTACH (2) M5 FACE BOARDS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (6) 1-1/2" WOOD SCREWS, AS SHOWN. (6) LAG SCREW WH 5/16x2-1/2 (2) BOLT WH 5/16x1 (2) WASHER LOCK EXT 12x19 (2) NUT BARREL WH 5/16x5/8 ATTACH L3 GROUND BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND THROUGH HOLES PROVIDED IN M5 BOARDS USING (4) 2-1/2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. ATTACH M10 SAFETY BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND THROUGH HOLES PROVIDED IN M5 BOARDS USING (2) 2-1/2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. (8) LAG SCREW WH 5/16x2 (6) SCREW PFH 8x1-1/2 (16) (6) WASHER LOCK EXT 8x19 T-NUT 5/16 ATTACH M9 ANGLE BRACE TO L3 AND M10 BOARDS USING (2) 1" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN. ATTACH K5 FLOOR RAILS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. ATTACH K1 SUPPORT TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND FLUSH TO TOP EDGES OF E2 UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. K1 K5 E2 K1 M5 M9 M10 E2 L3 (1) (1) L5 - GROUND BOARD - W100686 5/8"x4 3/8"x30" (16x112x762) (2) M6 - LOWER FACE BOARD - W101598 5/8"x3 3/8"x38 5/8" (16x86x982) M14 - FLOOR SUPPORT BOARD - W102864 5/8"x3 3/8"x30" (16x86x762) (2) M11 - UPPER FACE BOARD - W102866 5/8"x3 3/8"x26 5/8" (16x86x676) K2 - ROOF SUPPORT - W100683 5/8"x5 1/4"x51 5/8" (16x134x1310) M12 - ROCK WALL ARCH BOARD - W102862 5/8"x3 3/8"x30" (16x86x762) (1) (1) STEP 4 ATTACH L5 GROUND BOARD TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. USING M6 LOWER FACE BOARDS AS A TEMPLATE, PILOT DRILL USING AN 1/8" DRILL BIT AND ATTACH (2) M6 LOWER FACE BOARDS TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (10) 1-1/2" WOOD SCREWS, AS SHOWN. (14) ATTACH M14 SUPPORT BOARD TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (2) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. LAG SCREW WH 5/16x2 (14) M11 USING A HAMMER, INSERT (4) 1/4" T-NUTS INTO M11 UPPER FACE BOARDS , AS SHOWN. (4) USING M11 UPPER FACE BOARDS AS A TEMPLATE, PILOT DRILL USING AN 1/8" DRILL BIT AND ATTACH (2) M11 UPPER FACE BOARDS TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (8) 1-1/2" WOOD SCREWS, AS SHOWN. T-NUT 1/4 SCREW PFH 8x1-1/2" (18) ATTACH M12 ARCHED BOARD TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. E1 WASHER LOCK EXT 8x19 K2 ATTACH K2 SUPPORT TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS AND FLUSH TO TOP EDGES OF E2 UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. M12 M14 E3 M6 L5 M11 (2) M3 - TARP SUPPORT - W100692 5/8"x3 3/8"x60 1/8" (16x86x1528) J3 - FLOOR JOIST - W100984 (1) 1"x2 3/8"x60 1/8" (24x60x1528) (2) SP1 - FLOOR SUPPORT CLEAT - W100711 1"x1"x53 3/8" (24x24x1356) F71 - STANDARD ANGLE BRACE - W100689 (6) 1 3/8"x2 3/8"x13" (36x60x330) (4) J2 - END FLOOR CLEAT - W100710 1"x2 3/8"x3 3/8" (24x60x86) STEP 5 ATTACH (2) M3 TARP SUPPORT TO K1 AND K2 SUPPORTS USING (8) 2" WOOD SCREWS, AS SHOWN. ATTACH J3 FLOOR JOIST TO K5 FLOOR RAIL AND M14 FLOOR SUPPORT USING (4) 1-1/2" WOOD SCREWS, AS SHOWN. ATTACH (6) F71 STANDARD ANGLE BRACES TO THE INSIDE FACES OF K4, K5, M2 AND M14 BOARDS USING (6) 1-1/2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN. (6) LAG SCREW WH 5/16x2 (4) FLUSH J2 (12) E2 WASHER LOCK EXT 8x19 (6) (6) ATTACH (2) F71 STANDARD ANGLE BRACES CONNECTED TO K5 BOARD TO THE FACE OF E2 UPRIGHTS USING (2) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. (8) LAG SCREW WH 5/16x2-1/2 SCREW PFH 8x2-1/4 (14) (8) M3 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x7/8 (2) ATTACH (2) F71 STANDARD ANGLE BRACES CONNECTED TO M14 BOARD TO THE FACE OF E1 AND E3 UPRIGHTS USING (2) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. ATTACH F71 STANDARD ANGLE BRACE CONNECTED TO M2 BOARD TO THE EDGE OF E2 UPRIGHT USING 2-1/2" LAG SCREW AND LOCK WASHER, AS SHOWN. BOLT WH 5/16x1-1/2 SCREW PFH 8x1-1/2 SCREW PFH 8x2 ATTACH F71 STANDARD ANGLE BRACE CONNECTED TO K4 BOARD TO THE EDGE OF E2 UPRIGHT USING 2-1/2" LAG SCREW AND LOCK WASHER, AS SHOWN. ATTACH SP1 FLOOR SUPPORT CLEAT TO THE INSIDE FACES OF BOTH K4 AND M2 FLOOR RAILS USING (10) 1-1/2" WOOD SCREWS. FOR MOUNTING LOCATION, THE SP1 CLEAT SHOULD REST ON THE TOP EDGE OF THE F71 AGLE BRACES, AS SHOWN BELOW. M3 J3 K4 K5 SP1 SP1 M13 F71 M14 F71 E2 E3 ATTACH (4) J2 END FLOOR CLEATS TO THE INSIDE FACES OF E1, E2 AND E3 FORT UPRIGHTS AND FLUSH TO TOP EDGES OF SP1 FLOOR SUPPORT CLEATS USING (8) 2-1/4" WOOD SCREWS, AS SHOWN. E1 M1 - TENT SUPPORT - W101601 5/8"x3 3/8"x59 1/4" (16x86x1504) (1) M16 - TARP SUPPORT - W101237 5/8"x3 3/8"x29 1/8" (16x86x740) M4 - TARP TOP SUPPORT - W100693 5/8"x3 3/8"x60 1/8" (16x86x1528) (2) L9 - END FLOOR BOARD - W102863 5/8"x4 3/8"x29 7/8" (16x112x760) (1) (3) FP1- FLOOR PANEL - W102861 (1) STEP 6 ATTACH (1) L9 END FLOOR BOARD TO (2) J2 END FLOOR CLEATS AND J3 FLOOR JOIST USING (5) 1-1/2" WOOD SCREWS, AS SHOWN. (55) SCREW PFH 8x1-1/2 (4) ATTACH (3) FP1 FLOOR PANELS TO SP1 CLEATS AND J3 FLOOR JOIST USING (45) 1-1/2" WOOD SCREWS, AS SHOWN. ATTACH (1) L9 END FLOOR BOARD TO (2) J2 END FLOOR CLEATS AND J3 FLOOR JOIST USING (5) 1-1/2" WOOD SCREWS, AS SHOWN. (3) SCREW PFH 8x2 BOLT WH 5/16x1-1/4 (2) INSERT 5/16" T-NUT BEFORE INSTALLING M1 BOARD TO FORT. (5) M4 M1 WASHER LOCK EXT 8x19 (2) (2) ATTACH M1 TENT SUPPORT TO THE INSIDE FACE OF K1 SUPPORT USING (2) 1-1/4" BOLTS AND LOCK WASHERS, AS SHOWN. M1 M1 M16 K1 K5 K2 FP1 L9 L9 ATTACH M16 TARP SUPPORT TO THE INSIDE FACE OF K2 SUPPORT USING (2) 1" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN. ATTACH M4 TARP TOP SUPPORT TO THE TOP EDGES OF M1 AND M16 SUPPORTS USING (4) 2" WOOD SCREWS, AS SHOWN. J2 K4 FP1 FP1 J3 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x5/8 (1) ATTACH M1 TENT SUPPORT TO THE INSIDE FACE OF K5 FLOOR RAIL USING 1-1/4" BOLT AND LOCK WASHER, AS SHOWN. BOLT WH 5/16x1 F71 T-NUT 5/16 (1) J1 - WINDOW LEDGE - W100709 1"x2 3/8"x29 1/2" (24x60x750) (6) (4) K9-1 - WALL BOARD - W100713 3/8"x3 3/8"x15 3/4" (11x86x400) K9-2 - WALL BOARD - W100712 3/8"x3 3/8"x30 1/4" (11x86x768) STEP 7 WORKING YOUR WAY LEFT TO RIGHT, ATTACH (2) K9-2 WALL BOARDS TO K4 FLOOR RAIL AND L7 SCULPTURED RAIL USING (8) 1" WOOD SCREWS, AS SHOWN. ATTACH (6) K9-1 WALL BOARDS TO K4 FLOOR RAIL USING (12) 1" WOOD SCREWS IN THE BOTTOM SET OF HOLES, AS SHOWN. (16) SCREW PFH 8x1-1/2 (28) SCREW PFH 8x1 ATTACH (2) K9-2 WALL BOARDS TO K4 FLOOR RAIL AND L7 SCULPTURED RAIL USING (8) 1" WOOD SCREWS, AS SHOWN. ATTACH J1 WINDOW LEDGE TO (6) K9-1 WALL BOARDS PREVIOUSLY INSTALLED USING (16) 1-1/2" WOOD SCREWS, AS SHOWN. K9-2 PILOT DRILL (SEE BELOW) K9-2 K9-2 K9-1 J1 K9-2 PILOT DRILL (SEE BELOW) J1 K9-2 L7 K9-1 F K4 PILOT DRILL (4) INNER K9-2 BOARDS USING DIMENSIONS PROVIDED BELOW. 4 1/8" 15/16" OU 3/8" K9-2 K9-2 I NN ER TE R PROPER INSTALLATION OF K-9 BOARDS. (2) WP1 - WALL PANEL - W102865 STEP 8 CENTER AND ATTACH (2) WP1 WALL PANELS TO K1 SUPPORT AND K5 FLOOR RAIL USING (28) 1-1/8" WOOD SCREWS, AS SHOWN. (28) ASSEMBLER MAY HAVE TO LOOSEN OR REMOVE BOLTS AND BARRELS TO INSTALL WP1 PANELS. WP1 K1 M1 SCREW PFH 8x1-1/8 WP1 K5 (4) M17 - PICKET - W100705 5/8"x3 3/8"x27 1/8" (16x86x690) STEP 9 ATTACH (4) M17 PICKETS TO M8 WALL RAIL AND L6 ARCHED RAIL USING (16) 1-1/8" WOOD SCREWS, AS SHOWN. L6 M17 (16) M8 2 1/4" 3 1/8" TYP (5 SPCS) SCREW PFH 8x1-1/8" (1) H1 - SERVING SHELF SUPPORT - W101604 1"x3 3/8"x30 3/4" (24x86x780) (1) K3 - SERVING BOARD - W101605 5/8"x5 1/4"x28 3/4" (16x134x729) (2) K9-4 - WALL BOARD - W101239 3/8"x3 3/8"x37 3/8" (11x86x950) (2) (1) L8 - SCULPTURED RAIL - W101240 5/8"x4 3/8"x35 1/2" (16x112x902) (2) K9-3 - WALL BOARD - W101257 3/8"x3 3/8"x42" (11x86x1068) (6) H3 - SERVING BOARD SUPPORT - W101606 1"x3 3/8"x3 3/8" (24x86x86) K9-5 - WALL BOARD - W101259 3/8"x3 3/8"x21 3/8" (11x86x544) STEP 10 H1 ATTACH (2) H3 SERVING BOARD SUPPORTS TO H1 SERVING SHELF SUPPORT USING (4) 2" WOOD SCREWS, AS SHOWN. FLUSH (22) SCREW PFH 8x1-1/4 (4) SCREW PFH 8x2 STEP 11 WORKING FROM LEFT TO RIGHT, ATTACH K9-3 WALL BOARD TO L2 GROUND BOARD AND K4 FLOOR RAIL USING (4) 1" SCREWS, AS SHOWN. H3 BOLT WH 5/16x1-1/2 (1) SERVING SHELF SUPPORT ASSEMBLY BOLT WH 5/16x1 (1) NEXT, ATTACH K9-4 WALL BOARD TO L2 GROUND BOARD USING (2) 1" WOOD SCREWS, AS SHOWN. WASHER LOCK EXT 8x19 (2) NOW, ATTACH (6) K9-5 WALL BOARDS TO L2 GROUND BOARD USING (12) 1" WOOD SCREWS, AS SHOWN. WASHER LOCK EXT 12x19 (2) NEXT, ATTACH ANOTHER K9-4 WALL BOARD TO L2 GROUND BOARD USING (2) 1" WOOD SCREWS, AS SHOWN. ATTACH THE LAST K9-3 WALL BOARD TO L2 GROUND BOARD AND K4 FLOOR RAIL USING (4) 1" SCREWS, AS SHOWN. (1) NUT BARREL WH 5/16x7/8 NUT BARREL (1) WH 5/16x5/8 (28) USING L8 RAIL AS A TEMPLATE, MARK AND DRILL (1) 3/8" HOLE THROUGH K9-3 BOARD AND ATTACH L8 SCULPTURED RAIL TO (2) K9-3 WALL BOARDS AND E3 UPRIGHT USING 1-1/2" BOLT, LOCK WASHERS AND 7/8" BARREL NUT AT THE TOP RIGHT AND 1" BOLT, LOCK WASHERS AND 5/8" BARREL NUT AT THE TOP LEFT. SECURE THE TOP OF K9-4 BOARDS TO L8 SCULPTURED RAIL USING (4) 1" WOOD SCREWS, AS SHOWN. SCREW PFH 8x1 (9) SCREW PFH 8x1-1/2 ATTACH THE SERVING SHELF SUPPORT ASSEMBLY TO K9 WALL BOARDS, ON THE INSIDE OF FORT, USING (22) 1-1/4" WOOD SCREWS, AS SHOWN. E3 ATTACH THE K3 SERVING BOARD TO SERVING SHELF ASSEMBLY AND CENTER K9 WALL BOARDS USING (9) 1-1/2" WOOD SCREWS AT THE TOP OF K9-5 BOARDS, AS SHOWN. L8 E3 K3 L2 K4 L2 OUTER SERVING SHELF SUPPORT ASSEMBLY INNER K9-3 START K9-4 HERE PROPER INSTALLATION OF K-9 BOARDS. → K9-5 K9-4 K9-3 (4) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 12 INSERT (2) 1/4" T-NUTS INTO INSIDE SURFACE OF M7 AND M11 WALL BOARD, AS SHOWN. (6) BOLT PTH 1/4x1 NEXT, ATTACH EA HANDLE GRIP TO M7 WALL BOARD USING (2) 1" PTH BOLTS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN. USING HANDLE GRIP AS A TEMPLATE, PILOT DRILL USING A 1/8" DRILL BIT AND ATTACH THE SECOND EA HANDLE GRIP TO E2 UPRIGHT USING (2) 1-1/2" TAPPING SCREWS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN. (2) (8) WASHER FLAT 9x18 ATTACH THE REMAINING (2) EA HANDLE GRIPS TO (2) M11 FACE BOARDS USING (4) 1" PTH BOLTS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN. (8) (6) T-NUT 1/4 M7 M11 M11 SCREW TAPPING 14x1-1/2 E2 EA WASHER LOCK INT 8x15 (1) HY - TARP 1522x2119 - A100062 1/32"x59 7/8"x83 3/8" (.4x1522x2119) STEP 13 CENTER HY TARP OVER M4 TARP TOP SUPPORT AND ATTACH USING (4) 1/2" TAPPING SCREWS, AS SHOWN. NEXT, DRAPE HY TARP EVENLY OVER (2) M3 TARP SUPPORTS AND WRAP UNDERNEATH AND UP THE BACK SIDE OF M3 SUPPORT APPROXIMATELY 1-13/16" FROM THE TOP AND ATTACH USING (8) 1/2" TAPPING SCREWS, AS SHOWN. (12) M4 HY M3 M3 SCREW TAPPING 8x1/2 (2) M2 - BENCH SEAT - W102469 5/8"x3 3/8"x27 3/8" (16x86x694) (2) H4 - BENCH SEAT SUPPORT - W102470 1"x3 3/8"x6 1/2" (24x86x166) (2) EJ - L BRACKET 54x67 - A100053 H5 - BENCH UPRIGHT - W102471 (2) 1"x3 3/8"x11 3/4" (24x86x300) (2) H6 - BENCH GROUND BOARD - W102472 1"x3 3/8"x18 1/8" (24x86x460) STEP 14 EJ ATTACH (2) EJ BRACKETS TO H6 BENCH GROUND BOARDS USING (2) 1/2" BOLT, LOCK WASHERS AND 7/8" BARREL NUT, AS SHOWN. (2) SCREW PFH 8x1-3/4" (24) (2) H6 WASHER LOCK EXT 12x19 (2) H5 H6 BOLT WH 5/16x1/2 H6 NUT BARREL WH 5/16x7/8 ATTACH H5 BENCH UPRIGHTS TO H6 BENCH GROUND BOARDS USING (8) 1-3/4" WOOD SCREWS, AS SHOWN. H4 H4 ATTACH H4 BENCH SEAT SUPPORTS TO H5 BENCH UPRIGHTS USING (8) 1-3/4" WOOD SCREWS, AS SHOWN. H5 M2 H4 H4 ATTACH M2 BENCH SEATS TO H4 BENCH SEAT SUPPORTS USING (8) 1-3/4" WOOD SCREWS, AS SHOWN. (1) - BENCH ASSEMBLY STEP 15 USING BENCH ASSEMBLY BRACKETS AS A TEMPLATE, DRILL TWO 10MM THRU HOLES AND ATTACH EJ BRACKET TO L2 GROUND BOARD USING (2) 1/2" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN. (2) BOLT WH 5/16x1/2 (2) WASHER LOCK EXT 12x19 (2) EJ L2 NUT BARREL WH 5/16x5/8 (1) - SLIDE ASSEMBLY STEP 16 CENTER THE WAVE SLIDE ASSEMBLY IN OPENING, AS SHOWN. (3) BOLT WH 5/16x1/2 (3) WASHER LOCK EXT 12x19 USING A 10MM DRILL BIT, DRILL THREE THROUGH HOLES INTO THE SLIDE BED AND DECK BOARDS, AS SHOWN BELOW. ATTACH THE SLIDE ASSEMBLY TO THE DECK USING (3) 1/2" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN. 7 5/8" 6 5/16" 6 5/16" (3) 1 1/4" L NUT BARREL WH 5/16x5/8 (1) - ROCK WALL ASSEMBLY STEP 17 ATTACH THE ROCK WALL ASSEMBLY TO M14 FLOOR BOARD SUPPORT USING (2) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. CENTER ROCK WALL ON 'M14' BOARD AND PILOT DRILL 1/8" HOLES FOR ROCK WALL ATTACHMENT. E83 M14 E82 (2) LAG SCREW WH 5/16x2 (2) WASHER LOCK EXT 8x19 (1) - LADDER ASSEMBLY STEP 18 ATTACH THE LADDER ASSEMBLY TO M13 FLOOR RAIL SUPPORT USING (2) 2-1/2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. CENTER LADDER ON 'M13' BOARD AND PILOT DRILL 1/8" HOLES FOR LADDER ATTACHMENT. H75 M13 H74 (2) LAG SCREW WH 5/16x2-1/2 (2) WASHER LOCK EXT 8x19 (1) - SWING BEAM ASSEMBLY STEP 19 ATTACH SWING BEAM ASSEMBLY TO K1 ROOF SWING BEAM SUPPORT USING (4) 1" BOLTS, SPLIT WASHERS AND FLAT WASHERS, AS SHOWN BELOW. (4) (4) ATTACH HC I.D. TAG TO SB74 SWING BEAM USING (4) 5/8" PFH SCREWS, AS SHOWN. SCREW PWH 8x5/8 BOLT HEX 5/16x1 (4) WASHER SPLIT 5/16 (4) WASHER FLAT 8x27 K1 GD SWING BEAM ASSEMBLY SB74 HC (4) EZ - CHAIN GREEN 51.25" - A100068 (2) FB - SWING SEAT YELLOW - A100070 (2) FW - CHAIN GREEN 31" - A100112 (4) FA - QUICK LINK - A100069 (1) TN - TRAPEZE WITH HARDWARE YELLOW - A100334 STEP 20 ATTACH FB SWING SEAT TO (2) EZ CHAINS USING (2) FA QUICK LINKS, AS SHOWN (FIG. 1). REPEAT PROCESS TO ASSEMBLE SECOND SWING ASSEMBLY. NOW, ATTACH EZ CHAINS TO SWING HANGER QUICK LINKS ALREADY ASSEMBLED TO THE SWING BEAM (FIG. 2). ATTACH TN TRAPEZE TO (2) FW CHAINS USING (2) EYE BOLTS, (4) FLAT WASHERS AND (2) 5/16" LOCK NUTS, AS SHOWN. (FIG. 3) ATTACH (2) FW CHAINS TO SWING HANGER QUICKLINKS ALREADY ASSEMBLED TO THE SWING BEAM. (FIG. 4) TIGHTEN QUICK LINK FIG. 2 INSERT CHAIN INTO QUICK LINK FIG. 4 FIG. 1 FIG. 3 (1) SR - "B" REVISION TAG - A100315 (6) KC - METAL GROUND STAKE BROWN - A100178 ANCHORING INSTRUCTIONS NOTE: (4) FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! (2) STAKE A STAKE A BOLT WH 1/4x1/2" STAKE A (6) WASHER LOCK EXT 8x15 (6) H80 BOLT WH 1/4x1" WASHER FLAT 9x18 SWING (6) NUT BARREL WH 1/4x5/8" (2) SCREW PWH 8x5/8 STAKE B L3 SWING STAKE B STAKE B STEP 21 STAKE A: HAMMER STAKES INTO GROUND AGAINST BOARDS WHERE SHOWN. ATTACH TO GROUND BOARD USING (2) 1" BOLTS, WASHERS AND 5/8" BARREL NUTS. STAKE B: HAMMER STAKES INTO GROUND AGAINST GROUND BOARDS WHERE SHOWN. ATTACH TO FORT ASSEMBLY USING (4) 1/2" BOLTS, WASHERS AND 5/8" BARREL NUTS, AS SHOWN. STAKE B STAKE B FINAL STEP SR DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS. MAKE SURE EVERY BOARD IS SECURE AND MAKE SURE THE PLAY SET IS LEVEL. STEP 22 ATTACH SQ I.D.TAG TO THE INSIDE OF M13 FLOOR RAIL USING (2) 5/8" PWH SCREWS, AS SHOWN. ENJOY YOUR NEW PLAY SET! M13 Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging. This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual. This Limited Warranty does not cover: • • • • • • • • Labor for any inspection Labor for replacement of any defective item(s) Incidental or consequential damages Cosmetic defects which do not affect performance or integrity of a part or the entire product Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual. Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure Improper installation including but not limited to installation on uneven, unlevel, or soft ground Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect performance or integrity Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury. Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product. This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied. This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you. Pro Rated Part Replacement Schedule Product Age All Parts 0-30 days from date of purchase 31 days to 1 year Customer Pays $0 and free shipping $0 + S&H Wood Rot and Decay Only 1 year 2 years 3 years 4 years 5 years Over 5 years $0 and free shipping 20% + S&H 40% + S&H 60% + S&H 80% + S&H 100% + S&H Rev5/20/10 BRS ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Safe-T-Fuse fastening system
- Maximum of 9 children
- Maximum weight per child
- Residential use only
Frequently asked questions
You can find replacement parts on www.swingsetsonline.com
Call Backyard Discovery at 1-800-856-4445
Square, level, tape measure, cordless drill, Phillips screwdriver, 1/8” and 3/8” drill bits, claw hammer, drill attachments: socket driver, rubber mallet, ladder