Specifications | Camera Accessories - Kaiser Fototechnik

Camera Accessories - Kaiser Fototechnik
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:23 Seite 143
Camera
Accessories
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 144
„Discover the Possibilities“
Basically todayʼs cameras do the same
as always: they shoot pictures. But
there is a radical change in the way
they do it and in the possibilities to use
small tools to provide a technically perfect image tailored to the photographerʼs requirements. Image stabilization, face detection and „smile shutter“
mode are only the tip of the iceberg of
built-in helpers. But nevertheless there
is still plenty of room for reasonable
accessories: for the LCD screen, for
the lens, for the shutter release.
Tripods, ball heads, shoulder straps
and filters are equally useful.
Accessories expand the possibilities
of your camera and are sometimes
indispensable in certain situations or
to achieve desired results.
Here is a short survey:
• LCD accessories see page 145
• Lens accessories see page 150
• Shutter releases see page 156
• Shoulder and wrist straps and more carrying accessories see page 160
• Bags see page 164
• Tripods, heads, levels etc. see page 166
• Flash accessories see page 176
• More accessories see page 183
• Video transfer see page 186
144
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 145
6084
SL3 LCD Viewfinder
Screen attachment shaped like a light shield
with a built-in loupe for DSLRs and CSCs
with 3” LCD. Allows for perfect framing and
focus control when shooting and trouble-free
image review under any ambient light condition. Loupe with 2.3x magnification, lens with
coating on each side and eyesight adjustment via large knurled wheel. Extensive,
highly flexible eye cup.
Attaches on a self-adhesive holding frame
on which the viewfinder clicks into place.
Eye cup can be adjusted for left or right eye
viewing.
Outside dimensions (w/o eye cup, WxHxD):
75 x 63 x 85 mm (3 x 2.5 x 3.3 in.)
Weight: approx. 105 g (3.7 oz.)
Camera Accessories
145
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 146
6054/74
„digiShield2“
LCD Screen Glare Shield
For digital compacts with LCD up to 2.7”*.
Shields lateral and angular incidence of light
from the LCD monitor and improves the visibility of the monitor image.
Coil spring supported side flaps will keep the
glare shield in opened position.
Folds down completely and serves also as a
cover and a screen protector.
Fits many digital compact cameras. The
shield is attached to the tripod socket using
a suitable adapter plate. Regardless of the
position of the tripod socket on the camera
the glare shield can be attached so that it is
positioned properly on the monitor and fits
tightly to the camera body. It can be moved
sidewards and adjusted in height.
Includes three adapter plates, flat mounting
screw and tripod adapter screw to use the
camera together with the glare shield on a
tripod.
6054: black
6074: silver
* Eventually minor border covering with 2.7"
146
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 147
6055/75
„digiShield3“
LCD Screen Glare Shield
For digital compacts with 3.0” LCD screen.
Shields lateral and angular incidence of light
from the LCD monitor and improves the visibility of the monitor image on digital cameras.
Folds down completely and serves also as a
cover and a screen protector. Coil spring
supported side flaps will keep the glare
shield in opened position.
To ease the operation of a touch screen
monitor the complete glare shield flips up by
releasing a lock rail, no matter if it is open or
folded down.
The shield is attached to the tripod socket
with a screw with thin head or an adapter
screw, that has an additional tripod thread.
Regardless of the position of the tripod
socket on the camera the glare shield can
be attached so that it is positioned properly
on the monitor and fits tightly to the camera
body.
Supplied with 3 different adapter plates, two
different thin screws and an adapter screw
with tripod thread.
6055: black
6075: silver
Camera Accessories
147
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 148
6076/78
LCD Screen Protective Film
For use with digital cameras, mobile phones
and PDAs. Protects the screen from
scratches, dirt and fingerprints. Suitable for
touch-screens. Can be removed without
residues.
6076: Set with three 4 x 3" (10 x 8 cm)
sheets, each, with cutting lines for
required size. Comes with cleaning
cloths and a squeegee card to apply
the film.
6078: For 3” LCD screens. Can be cut to fit
smaller screens. Rounded corners.
3 pieces.
6078
6079-82/6093-94
„Crystal Clear“ LCD Screen
Protecting Film
Layer composition
Schichtaufbau
High-quality film for use on LCD screen of
digital cameras. Protects from scratches, dirt
and fingerprints. Almost invisible.
Hard coated PET film with UV protection,
scratch resistant. Optimized for touch-screens. Attaches by adhesion due to silicone
coating and can be removed without residues. Easy to apply, no bubbling. 1 piece.
6079:
6080:
6081:
6082:
for
for
for
for
2.7”
3.0”
3.5"
4.0"
screens
screens
screens
screens
16:9 aspect ratio
6093: for 3.0" screens
6094: for 3.5" screens
148
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 149
6085-92/6095-97/6616-51/6664-76
„Antireflex“ LCD Screen
Protecting Film
High-quality film for use on LCD screen of
digital cameras. Protects from scratches, dirt
and fingerprints. Glare-free due to antireflection coating.
Hard coated PET film with UV protection,
scratch resistant. Optimized for touch-screens. Attaches by adhesion due to silicone
coating and can be removed without residues. Easy to apply, no bubbling. 1 piece.
Layer composition
Antireflection
Hardcoat
UV filter
PET
Silicone
Backing layer
6085: for 2.5“ screens
6086: for 2.7“ screens
6088: for 2.8“ screens
6087: for 3.0“ screens
6090: for 3.5" screens
6092: for 4.0" screens
16:9 aspect ratio
6095: for 3.0" screens
6097: for 3.5" screens
Also available custom-cut for these SLRs
and CSCs:
6616: for Canon 7D *
6618: for Canon 60D / 600D /
Panasonic TZ41
6619: for Canon 1100D
6625: for Nikon D3100
6626: for Olympus E450 / E420 / E520
6627: for Olympus E620
6628: for Panasonic G3 / G5 / GF3 / GF5 /
GX1 / FZ48
6629: for Panasonic TZ18 / 22 / 25 / 31 /
36, Leica V-Lux 30 / 40, Nikon P510
6630: for Panasonic GH1 / G1
6631: for Panasonic GF1 / GF2 / FZ45 /
LX5 / LX7, Leica D-Lux 5 / 6
6632: for Panasonic GH2 / G2 / FZ100,
FZ150 / FZ200, Leica V-Lux 2/3
6634: for Sony Alpha 230 / 290 / 450
6636: for Sony Alpha 500 / 550
6637: for Sony Alpha 580
6638: for Sony Alpha 33 / 35 / 55 and
NEX 3 / 3N / C3 / 5 / 5N / 6 / 7 / F3
6640: for Sony Alpha 57 / 65 / 77,
DSC-HX200
6642: for Olympus OM-D E-M5
6643: for Nikon D600 *
6644: for Nikon D3200
6645: for Nikon D7000 *
6646: for Nikon D5100 / D5200
6648: for Nikon 1 V1, Fujifilm HS 30
6649: for Nikon D800 *
6650: for Canon 5D Mark III
6651: for Canon 650D
6664: for Canon EOS M
6665: for Nikon 1 J2, 1 J3, 1 V2
6667: for Canon 6D
6668: for Canon 1D C / 1D X *
6669: for Nikon D4 *
6670: for Nikon D7100 *
6675: for Canon 100D
6676: for Canon 700D
* additional film(s) for status LCD(s) included
Camera Accessories
149
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 150
6865-99
Lens Hood
Dedicated lens hoods for specific lenses of
digital SLRs. Can also be mounted in
reversed position on the lens for saving
space (except 6887).
Made from impact-resistant plastic.
6865: CW88C (replaces Canon EW-88C), for
Canon EF 24-70/2.8L II USM
6866: CT67 (replaces Canon ET-67), for
Canon EF 100/2.8 USM/Makro USM
6868: CT73 (replaces Canon ET-73), for
Canon EF 100/2.8 L Makro IS USM
6869: CT73B (replaces Canon ET-73B), for
Canon EF 70-300/4-5.6 L IS USM,
white
6870: CT74 (replaces Canon ET-74), for
Canon EF 70-200/4.0 L (IS) USM,
white
6871: CT83C (replaces Canon ET-83C), for
Canon EF 100-400/4.5-5.6 L IS USM,
white
6873: CT87 (replaces Canon ET-87), for
Canon EF 70-200/2.8 L IS II USM,
white
6874: CW83F (replaces Canon EW-83F), for
Canon EF 24-70/2.8 L USM
6875: CW83G (replaces Canon EW-83G), for
Canon EF 28-300/3.5-5.6 L IS USM,
white
6876: CW83H (replaces Canon EW-83H), for
Canon EF 24-105/4.0 L IS USM
6878: CW88 (replaces Canon EW-88), for
Canon EF 16-35/2.8 L II USM
6879: CW78E (replaces Canon EW-78E), for
Canon EF-S 15-85/3.5-5.6 IS USM
6880: CW60C (replaces Canon EW-60 C), for
Canon EF 28-90/4-5.6 II (USM),
Canon EF 28-80 (II/USM),
Canon EF-S 18-55/3.5-5.6 IS (USM/II),
Canon EF 22-55/4.0-5.6
6881: CW73II (replaces Canon EW-73 II), for
Canon EF 24-85/3.5-4.5 (USM)
6882: CW78BII (replaces Canon EW-78 B II), for
Canon EF 28-135/3.5-5.6 IS USM
6883: CS71II (replaces Canon ES-71 II), for
Canon EF 50/1.4 USM
150
6884: CT65III (replaces Canon ET-65 III), for
Canon EF 85/1.8 (USM),
Canon EF 100/2.0 USM,
Canon EF 135/2.8 Soft-Fokus,
Canon EF 70-210/3.5-4.5 USM,
Canon EF 100-300/4.5-5.6 (USM)
6885: CT65B (replaces Canon ET-65 B), for
Canon EF 70-300/4.5-5.6 DO IS USM,
Canon EF 70-300/4.0-5.6 IS USM
6886: CT67B (replaces Canon ET-67 B), for
Canon EF-S 60/2.8 Macro USM
6887: CS62 (replaces Canon ES-62), for
Canon EF 50/1.8 II
6888: CT60III (replaces Canon ET-60 III), for
Canon EF 75-300/4.0-5.6 III (USM),
Canon EF 90-300/4.5-5.6 (USM),
Canon EF-S 55-250/4.0-5.6 IS
6889: CW73B (replaces Canon EW-73 B), for
Canon EF-S 17-85/4.0-5.6 IS USM,
Canon EF-S 18-135/3.5-5.6 IS
6890: CW78D (replaces Canon EW-78 D), for
Canon EF-S 18-200/3.5-5.6 IS,
Canon EF 28-200/3.5-5.6 (USM)
6891: CW83E (replaces Canon EW-83 E), for
Canon EF-S 10-22/3.5-4.5 USM,
Canon EF 17-40/4.0L USM,
Canon EF 16-35/2.8L USM (old version)
6892: CW83J (replaces Canon EW-83 J), for
Canon EF-S 17-55/2.8 IS USM
6893: NB32 (replaces Nikon HB-32), for
Nikon AF-S DX 18-70/3.5-4.5G IF-ED,
Nikon AF-S 18-105/3.5-5.6 G ED VR,
Nikon AF-S 18-135/3.5-5.6 IF-ED
6894: NB45 (replaces Nikon HB-45), for
Nikon AF-S DX 18-55/3.5-5.6G
ED/EDII/VR
6895: NB37 (replaces Nikon HB-37), for
Nikon AF-S DX 55-200/4-5.6 G ED VR
6899: SH108 (replaces Sony ALC-SH 108), for
Sony DT 18-55/3.5-5.6 SAM
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 151
6829/31
Lens Hood for Pancake Lenses
Made of matte black rubber. Rotating
connecting ring with metal mount and
locking screw. Includes lens cap for use with
mounted lens hood.
6829: For Panasonic Lumix G with 1.7/
20 mm or 2.5/14 mm Pancake lens,
also for JVC and Panasonic camcorders with 46 mm filter thread.
6831: For Olympus Pen with M.Zuiko Digital
2.8/17 mm or M.Zuiko Digital 3.55.6/14-42 mm II Pancake lens, also
for Panasonic Lumix G X Vario PZ
3.5-5.6/14-42 mm Pancake lens and
Canon, JVC and Sony camcorders
with 37 mm filter thread.
6820-27/6850-53
3-in-1 Lens Hood
For lenses with 28 to 200 mm focal length
(35 mm equivalent). Made of matte black
silicone, foldable. With light baffles. Metal
screw-in mount. Filter thread.
6850:
6851:
6853:
6820:
6821:
6822:
6823:
6824:
6825:
6826:
6827:
Camera Accessories
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
37
43
46
49
52
55
58
62
67
72
77
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
151
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 152
6833-48
Snap-On Lens Cap
Reliable protection by clamp-on design for
snapping on to filter thread of lens. With lens
cap keeper. Can also be used with lens
hood mounted.
6845:
6847:
6848:
6833:
6834:
6835:
6836:
6900-92
Lens Cap
Diameters are the inside
dimensions of the lens
cap. This corresponds with
the outside diameter of the
lens (or filter) which is
covered with the lens cap.
6056
Lens Cap Keeper
6056
152
ø
ø
ø
ø
ø
ø
ø
37
43
46
49
52
55
58
mm
mm
mm
mm
mm
mm
mm
6837:
6838:
6839:
6840:
6841:
6842:
ø
ø
ø
ø
ø
ø
62
67
72
77
82
86
mm
mm
mm
mm
mm
mm
Slip lid, made of flexible plastic, black.
6915:
6916:
6917:
6918:
6919:
6920:
6921:
6922:
6923:
6924:
6925:
6926:
6928:
6929:
6930:
6931:
6932:
6933:
6934:
6935:
6936:
6937:
6938:
6939:
6940:
6941:
6942:
6943:
6944:
6945:
6946:
6947:
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
15
16
17
18
19
20
21
22
23
24
25
26
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
6948:
6949:
6950:
6951:
6952:
6953:
6954:
6955:
6956:
6957:
6958:
6959:
6960:
6961:
6962:
6963:
6964:
6965:
6967:
6968:
6970:
6971:
6972:
6974:
6975:
6977:
6980:
6982:
6985:
6990:
6900:
6992:
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
ø
48 mm
49 mm
50 mm
51 mm
52 mm
53 mm
54 mm
55 mm
56 mm
57 mm
58 mm
59 mm
60 mm
61 mm
62 mm
63 mm
64 mm
65 mm
67 mm
68 mm
70 mm
71 mm
72 mm
74 mm
75 mm
77 mm
80 mm
82 mm
85 mm
90 mm
100 mm
120 mm
Protects against loss of lens cap. A selfadhesive plate is stuck to the lens cap and
attached to the lens by an elastic cord.
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 153
6605-11
„Vivicap“ White Balance Filter
Snap-on filter with specially designed prism
structured surface for white-balancing of
digital cameras and camcorders. Easy to
use clamping mechanism provides for quick
installation and removal. Serves also as a
lens cap and can also be attached when a
lens hood is used.
6605:
6606:
6607:
6608:
6609:
6610:
6611:
6531-38
Lens Rear Cap
mm
mm
mm
mm
mm
mm
mm
for Canon EOS
for Minolta MD
for Sony Alpha / Minolta AF
for Nikon
for Olympus OM
for Pentax K
for Micro Four Thirds
(Olympus/Panasonic)
Made from impact-resistant plastic, black.
6521:
6522:
6523:
6525:
6526:
6527:
6528:
Camera Accessories
52
55
58
62
67
72
77
Made from impact-resistant plastic, black.
6531:
6532:
6533:
6535:
6536:
6537:
6538:
6521-28
Camera Body Cap
ø
ø
ø
ø
ø
ø
ø
for Canon EOS
for Minolta MD
for Sony Alpha / Minolta AF
for Nikon
for Olympus OM
for Pentax K
for Micro Four Thirds
(Olympus/Panasonic)
153
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 154
6542-99
Filter Adapter Ring
For mounting filter and front attachments to
lenses with deviating mounting threads.
Precision metal rings with dull black surface
(6585: silver finish).
Lens thread – Filter thread
6547:
6584:
6585:
6586:
6588:
6589:
6542:
6543:
6544:
6591:
6592:
6593:
6594:
6548:
6599:
6595:
6596:
6549:
6545:
6546:
6597:
6550:
6551:
6552:
6508-19
T-Mount Adapter
6555:
6556:
6557:
6558:
6561:
6562:
6563:
6564:
6565:
6567:
6568:
6566:
6569:
6570:
6571:
6572:
6573:
6574:
6575:
6576:
6577:
6578:
6579:
52 - 49
52 - 55
52 - 58
52 - 62
55 - 52
55 - 58
55 - 62
55 - 67
58 - 52
58 - 55
58 - 62
58 - 67
62 - 58
62 - 67
62 - 72
62 - 77
67 - 58
67 - 72
67 - 77
72 - 58
72 - 77
77 - 58
77 - 82
Thread adapter for mounting lenses, bellows, slide duplicators, focussing helical
mounts, etc. with T-mount on various
cameras.
6508:
6509:
6511:
6512:
6513:
6514:
6515:
6517:
6518:
6519:
154
27 - 37
28 - 37
30 - 37
30.5 - 37
34 - 37
37 - 43
37 - 46
37 - 49
37 - 52
39 - 43
40.5 - 43
40.5 - 46
40.5 - 49
40.5 - 52
41.5 - 46
43 - 46
43 - 49
43 - 52
46 - 49
46 - 52
46 - 55
49 - 52
49 - 55
49 - 58
Micro Four Thirds (Olympus/Panasonic)
Sony NEX
Pentax K
Nikon
Minolta MD
Canon FD
Olympus OM
Yashica / Contax
Sony Alpha / Minolta AF
Canon EOS (Autofocus)
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 155
6506
„Digital“ Slide Duplicator
Suitable for digital SLRs and digital compacts
with front lens thread. Attaches to the filter
thread of the lens. 52 mm connecting
thread. 58-52 mm adapter ring included.
Adapter rings for other connecting threads
see below.
Detachable achromatic 10 dioptre macro
lens, can also be used separately. A lens
with a focal length between 80 and 120 mm
(based on full-frame sensor) is required to
achieve full size copies, larger frames require
higher focal length.
Includes holder for two 35 mm slides.
Length: approx. 12.5 cm (4.9 in.)
Suitable adapter rings:
6561:
6565:
6569:
6573:
6576:
6578:
6507
Film Strip Carrier
55
58
62
67
72
77
–
–
–
–
–
–
52
52
58
58
58
58
mm
mm (included)
mm
mm
mm
mm
For six 35mm negatives or unmounted
slides. For use with Slide Duplicator 6506.
Length: approx. 27 cm (10.6 in.)
Camera Accessories
155
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 156
6161-62
„Twin1 R3“ Wireless/Wired Remote
Shutter Release
6161: Twin1 R3-UT, for Canon 60D, 100D,
300D, 350D, 400D, 450D, 500D, 550D,
600D, 650D, 700D, Pentax *istD,
*istDL(2), *istDS(2), K-5, K-5 II(S), K-7,
K10D, K20D, K-30, K100D, K110D,
K200D, Samsung GX-1L, GX-1S,
GX-10, GX-20, IR only: Canon EOS
M, Pentax K-m, K-r, K-x, X5
6161
6162: Twin1 R3-UTN2, for Nikon D90, D600,
D3200, D5000, D5100, D5200,
D7000, D7100, Coolpix A, P7700,
IR only: Nikon D40(x), D50, D60,
D70(s), D80, D3000, 1 J1, 1 J2, 1 V1,
1 V2, Coolpix P7100
6167-71
„Twin1 R4“ Wireless/Wired Remote
Shutter Release
6167: Twin1 R4N, for Nikon and Fuji cameras with 10 pin connector.
6168: Twin1 R4U, for Canon, Pentax,
Samsung and Sigma cameras with
2.5 mm jack plug connector.
6169: Twin1 R4C, for Canon cameras with
N3 connector.
6170: Twin1 R4S, for Sony and Minolta
cameras with 3 pin connector.
6171: Twin1 R4P, for Panasonic and Leica
cameras with 2.5 mm jack plug
connector.
Please check our website at
www.kaiser-fototechnik.de
for an up-to-date camera
compatibility list.
Suitable for many (D)SLR and compact
system cameras with built-in infrared receiver. Depending on the type of camera, the
Twin1 R3 transmitter can be used as a wireless IR or as a wired remote shutter release.
Half-shutter mode (activates TTL metering
and autofocus prior to shooting), delay shot
mode (wireless), bulb shot (wireless and
wired). The single, large release button provides for error-free operation. Can also be
used as a flash light, built-in LED works
either continuously or blinks periodically. 88 x
26 x 17 mm (3.5 x 1 x 0.7 in.), 19 g (0.7 oz.).
Maximum operating range: 50 m (150 ft.)
(Nikon, Pentax, Samsung), 25 m (75 ft.)
(Canon).
Includes 1 m (3 ft.) release cable, 23A battery (12 V) and key ring.
Suitable for many (D)SLR and compact
system cameras. Kit contains transmitter
and receiver, 1 m (3 ft.) release cable and
more accessories.
Transmitter can be used as a wireless IR or
as a wired remote shutter release. Half-shutter mode (activates TTL metering and autofocus prior to shooting), delay shot mode
(wireless), bulb shot (wireless and wired).
The single, large release button provides for
error-free operation. Can also be used as a
flash light, built-in LED works either continuously or blinks periodically. 88 x 26 x
17 mm (3.5 x 1 x 0.7 in.), 19 g (0.7 oz.).
Twin 1 R4U, R4C, R4S, R4P receiver:
Compact unit with two red indicator LEDs.
40 x 30 x 25 mm, 11 g (1.6 x 1.2 x 1 in.,
0.4 oz.). Includes spare battery.
Twin1 R4N receiver: Extremely small and
light-weight (only 6 g / 0.2 oz.), red indicator
LED. Powered by the camera, needs no
extra batteries. 15 x 15 x 22 mm (0.6 x 0.6 x
0.9 in.).
Maximum working range: 100 m (330 ft.)
Batteries (included):
Transmitter: 23A type (12V)
Receiver: CR2032 type (3V) (except R4N)
6167
156
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 157
6177-81
„Twin1 RF“ Wireless/Wired Remote
Shutter Release
6177: Twin1 RFU, for Canon, Pentax,
Samsung and Sigma cameras with
2.5 mm jack plug connector.
6178: Twin1 RFC, for Canon cameras with
N3 connector.
6179: Twin1 RFN, for Nikon and Fuji cameras with 10 pin connector.
6180: Twin1 RFS, for Sony and Minolta
cameras with 3 pin connector.
6181: Twin1 RFP, for Panasonic and Leica
cameras with 2.5 mm jack plug
connector.
Please check our website at
www.kaiser-fototechnik.de
for an up-to-date camera
compatibility list.
6131-35
„Twin1 ISR“ Wired Remote Shutter
Release
6131: Twin1 ISR iC, for Canon, Pentax,
Samsung and Sigma cameras with N3
or 2.5 mm jack plug connector.
6133: Twin1 ISR iN, for Nikon and Fuji cameras with 10 pin connector and for
Nikon D70s, D80, D90, D600, D3100,
D3200, D5000, D5100, D5200, D7000,
D7100, Coolpix P7700, A.
6134: Twin1 ISR i04, for Sony and Minolta
cameras with 3 pin connector.
6135: Twin1 ISR i07, for Panasonic and
Leica cameras with 2.5 mm jack plug
connector.
Please check our website at
www.kaiser-fototechnik.de
for an up-to-date camera
compatibility list.
Camera Accessories
Suitable for many (D)SLR and compact system
cameras. Kit contains transmitter and receiver,
1 m (3 ft.) release cable and more accessories.
Transmitter can be used as a wireless radiocontrolled or as a wired remote shutter release. Half-shutter mode (activates TTL metering
and autofocus prior to shooting), delay shot
mode (wireless), bulb shot (wireless and wired).
The single, large release button provides for
error-free operation. Can also be used as a
flash light. 88 x 26 x 17 mm (3.5 x 1 x 0.7 in.),
19 g (0.7 oz.).
6177
Twin 1 RFU, RFC, RFS, RFP receiver:
Compact unit with two red indicator LEDs.
40 x 30 x 25 mm, 11 g (1.6 x 1.2 x 1 in.,
0.4 oz.). Includes spare battery.
Twin1 RFN receiver: Extremely small and lightweight (only 6 g / 0.2 oz.), red indicator LED.
Powered by the camera, needs no extra batteries. 15 x 15 x 22 mm (0.6 x 0.6 x 0.9 in.).
Maximum working range: 100 m (330 ft.).
Operating frequency: 2.4 GHz. Batteries
(included): Transmitter: 23A type (12V).
Receiver: CR2032 type (3V) (except RFN).
Remote release for interval, continuous, bulb
and time shutter control.
Normal shutter release works also without or
with empty battery. Delay start is supported.
Timer and interval time ranges from
1 second to 99 hours, 59 minutes,
59 seconds. Exposure numbers in interval
and continuous mode range from 1 to
9.999. 4-way-operation button. Illuminated
triple-spaced LCD, three types of display
mode. Easy user interface for all settings.
6131
All buttons can be locked to prevent unintentional operation. Beep sound can be
switched off. Low battery warning.
Battery (included): 3 V (CR 2032)
Operating time: approx. 2 months
Release cable length: 1 m
Dimensions: 23 x 16 x 100 mm
(0.9 x 0.6 x 3.9 in.)
Weight: 26 g (0.9 oz.) (incl. batteries)
157
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 158
6187-93
„MonoCR“ Wired Remote Switch
Compact ergonomically designed remote
release. Two-stage release button (half-shutter mode activates TTL metering and autofocus prior to shooting). Release button can
be locked for bulb shot, with color indicator.
Release cable can be detached and
extended by optional 6185 extension cable.
No battery required.
Length of coiled cable (extended): 50 cm
(19.7 in.)
Dimensions: 105 x 34 x 23 mm
(4.1 x 1.3 x 0.9 in.)
Weight:
30 g (1.1 oz.).
Please check our website at
www.kaiser-fototechnik.de
for an up-to-date camera
compatibility list.
6185
Extension Cable
6187: MonoCR-C2, replaces Canon RS60E3 and Pentax CS-205, for Canon,
Pentax, Samsung and Sigma cameras
with 2.5 mm jack plug connector
6188: MonoCR-C1, replaces Canon RS80N3, for Canon cameras with N3
socket
6189: MonoCR-N1, replaces Nikon MC-30,
for Nikon and Fuji cameras with 10 pin
socket
6190: MonoCR-N3, replaces Nikon MCDC2, for Nikon cameras from D90 up
to D7100
6191: MonoCR-S1, replaces Sony RMS1AM and Minolta RC-1000, for Sony
and Minolta cameras with 3 pin socket
6192: MonoCR-P1, replaces Panasonic
DMW-RSL1, for Panasonic and Leica
cameras with 2.5 mm jack plug
connector
6193: MonoCR-O2, replaces Olympus
RM-UC1, for Olympus PEN, OM-D,
E series (in part)
For MonoCR wired release switches. Also
suitable for Twin1 R3, Twin1 R4, Twin1 RF
and Twin1 ISR release cables.
Length: 2 m (6 ft.). Several cables can be
used in connection to get longer range.
6101-02
Cable Release
Black fabric covering.
6101: Length 25 cm (9.8 in.)
6102: Length 50 cm (19.7 in.)
threaded rotating tip
6101
6102
6103/05
Cable Release
6103
6105
158
With locking screw.
Black fabric covering.
6103: Length 15 cm (6 in.)
6105: Length 50 cm (19.7 in.),
threaded rotating tip
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 159
6108
Cable Release
With auto-lock disc.
Black fabric coating.
Length 50 cm (19.7 in.),
threaded rotating tip
6184
Professional Cable Release
Upper part with formed grip and auto-lock
disc. Interchangeable release with black plastic covering and threaded rotating tip.
Release travel adjustable.
Length: 50 cm (19.7 in.)
6148
Cable Release Adapter
6154
Cable Release Adapter
6143-44
Pneumatic Remote Release
For connecting the standard cable release to
cameras with awkwardly placed connecting
thread. L- shape.
Threaded rotating tip.
For the use of conventional cable releases
on cameras (e.g. auto focus or compact
cameras) which have only a socket to
connect an electric release, or do not have a
cable release bush.
6143: With 5 m (16 1/2 ft.) long release tube
and winding reel. 15 cm (5.9 in.) long
cable release with threaded rotating
tip.
6144: With 10 m (33 ft.) long release tube,
which can be devided in 2 x 5 m
(2 x 16 1/2 ft.). 15 cm (5.9 in.) long
cable release with threaded rotating
pin. With winding reel and plastic box.
Camera Accessories
6143
6144
159
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 160
6780
„Neopren“ Camera Strap
For cameras with two strap connectors.
Shoulder pad made from flexible high-grade
Neoprene, edges covered with fabric. High
carrying comfort. Ergonomically shaped,
conforms to shoulder or neck. Durable and
sturdy. Length adjustable. End sections can
be detached from the Neoprene part and
reconnected to serve as a wrist strap.
Length: 140 cm (55 in.) max.
Width: 65/40 mm (2.6 / 1.6 in.)
Colour: black
6771
Professional Camera Strap
Highly durable woven strap with non-slip
shoulder pad on the underside. Length
adjustment at both ends. For cameras with
round or flat eyelets.
Width: approx. 30 mm (1.2 in.)
Length: approx. 100 cm (39.4 in.)
Color: black
6791
Professional Camera Strap
Extremely hard-wearing woven strap with
widened shoulder area. Non-slip shoulder
area. Length can be adjusted on both sides.
For cameras with round or flat eyelets. Width
approx. 12/50 mm (.5/2 in.), length approx.
110 cm (3 ft. 7 in.)
Color: black
6751
Camera Strap
6742
„Neopren“ Camera Strap
160
Made of high-grade polyester webbing. With
woven-in rubber filaments on inside to prevent slipping. Ends of strap with quick-release safety locks. Length adjustable.
For cameras with round or flat eyelets.
Width: approx. 30 mm (1.2 in.)
Length: approx. 110 cm (3 1/2 ft.)
Color: black
Carrying strap for digital compacts with
single strap connector. Shoulder pad made
of high-grad soft Neoprene, edges covered
with fabric. High carrying comfort.
Ergonomically shaped, conforms to shoulder
or neck. Quick-release lock.
Length: approx. 53 cm (20.9 in.)
Width: approx. 45/30 mm (1.8 / 1.2 in.)
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 161
6778-79
„Adventure“ Camera Strap
Heavy-duty woven strap for cameras with
two round or flat fastening eyes. Inner
surface with non-slip protection.
Adjustable length, max. 145 cm (57.1 in.).
Detachable end sections can be reconnected to serve as a wrist strap.
6778: Denim, width 35 mm (1.4 in.)
6779: Khaki, width 38 mm (1.5 in.)
6752-55
Genuine Leather Carrying Strap
For digital compacts with one fastening eye.
Also suitable for mobile phones, MP3 players etc.
Width: 10 mm (0.4 in.)
Length: approx. 46 cm (18.1 in.)
6752:
6753:
6754:
6755:
6747-48
„Reflex“ Neck Strap
black
red
olive
brown
Narrow reflective shoulder strap.
For digital compact cameras with single strap
connector, also suitable for mobile phones,
MP3 players, etc. Quick-release lock.
Length: approx. 47 cm (18.5 in.)
Width: 1 cm (0.4 in.)
6747: silver/black
6748: silver/red
6745-46
Neck Chain / Carrying Strap
For cameras with single strap connector,
also suitable for mobile phones, MP3 players, etc.
6745: Gracefully built silver chain with clear
plastic cover. Goes perfectly with the
styling of today's digital compacts.
Can be easily detached.
Length: approx. 46 cm (18.1 in.)
6746: Soft elastic textile fabric. Quick release
lock. Length: approx. 49 cm (19.3 in.)
Camera Accessories
6745
6746
161
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:24 Seite 162
6701-02
„Profi“ Camera Wrist Strap with
Mini-Stand
Suitable for larger compacts, CSCs and
(D)SLRs. Soft padded genuine leather hand
support with adjustable fixtures.
Camera mounting plate with tripod thread
and foldable legs providing a secure stand
when put on table or floor. Counter-sunk
fastening screw.
Non-slip camera rest.
Height of mounting plate: approx. 10 mm
(0.4 in.).
6701
6701: „Profi“ Camera Wrist Strap
6702: „Pro 2.0“ Camera Wrist Strap, with
additional safeguard belt around the
wrist for more safety and stability.
6702
6737-40
Genuine Leather Wrist Strap
For digital compacts with one fastening eye.
Also suitable for mobile phones, MP3 players, etc.
Width: 10 mm (0.4 in.)
Length: approx. 22 cm (8.7 in.)
6737:
6738:
6739:
6740:
6735-36
Wrist Strap
6736
6735
162
black
red
olive
brown
For cameras with single strap connector,
also suitable for many mobile phones, MP3
players, etc.
6735: Gracefully built silver chain with clear
plastic cover. Goes perfectly with the
styling of today's digital compacts.
Can be easily detached.
Length: approx. 24 cm (9.4 in.)
6736: Soft elastic textile fabric. Quick release
lock. Length: approx. 26 cm (10.2 in.)
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 163
3272
Hand Grip
For lighting units, cameras, etc.
With foam shell. 1/4" connection thread with
washer made of elastic plastic, 1/4" tripod
thread.
Includes snap-hook with key ring and fixture
for tripod thread.
Height: approx. 120 mm (4.7 in.)
96008
Video Shoulder Pod
Combined chest and shoulder pod for camcorders. Pivoting mounting plate with 1/4”
thread, securing pin and non-slip face.
Length steplessly adjustable and lockable in
any position.
Folded flat the pod can stay fitted to the
camcorder. Adjustable strap.
6370-76
Photo Functional Gloves
Combination of mitten and half finger gloves
for perfect mobility, secure grip and ideal
protection against cold.
Mitten and thumb cover can be folded back
and fastened with a Velcro strip.
Made of breathable, skin friendly fleece with
anti-slip coating on the palm.
Colour: black
6370:
6372:
6374:
6376:
Camera Accessories
size
size
size
size
M
L
XL
XXL
163
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 164
8281-89
„digiShell“ Hard Shell Camera Bag
Compact camera bags with hard shell exterior and two-way zipper. Interior accessory
pocket. With belt loop, detachable carrying
strap and snap hook.
„digiShell 1“,
9.5 x 6 x 2.5 cm (3.7 x 2.4 x 1 in.)
8281: black
8282: blue
8283: grey
„digiShell 2“,
10.8 x 6.5 x 3.3 cm (4.3 x 2.6 x 1.3 in.)
8287: black
8288: blue
8289: grey
All measurements are inside dimensions.
8255/61
„digiSkin“ Soft Leather Bags
Small belt pouches made of soft genuine
leather surrounding the camera like a
second skin. Velvety inner lining, interior
pocket for memory card and belt loop.
With magnetic catch.
8255: „digiSkin 1“, 6.0 x 9.0 x 2.6 cm
(2.4 x 3.5 x 1.0 in.)
8261: „digiSkin 7“, 5.8 x 9.5 x 2.8 cm
(2.3 x 3.7 x 1.1 in.)
All measurements are inside dimensions.
164
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 165
8825-27
„SmartLoader“ Camera Bag
Lightweight and stable bag for cameras and
camcorders.
Main compartment with divider. Lid with inside mesh pocket, opens away from the body
and stays open in a fixed position. Mash
pockets on both sides. Zipped front pocket
with large cover and card pocket.
Padded handle. Adjustable carrying strap
with shoulder pad. Metal D-rings and snap
hooks. Belt loops.
8825: SmartLoader S, for megazoom cameras and camcorders. Inside dimensions (WxHxD): 10.6 x 13 x 8.7 cm
(4.2 x 5.1 x 3.4 in.).
8825
8826: SmartLoader M, for bridge cameras,
CSCs and camcorders. Inside dimensions (WxHxD): 16 x 10 x 9 cm (6.3 x
3.9 x 3.5 in.).
8827: SmartLoader L, for DSLR cameras.
With lens support divider. Inside
dimensions (WxHxD): 17.5 x 13 x
10 cm (6.9 x 5.1 x 3.9 in.).
8827
8818
8818
„EasyLoader“ Camera Bag
For digital and conventional SLRs.
8826
With accessory pockets inside the outer lid
and on both sides. Two tops, which can be
connected via a Velcro closure. Spacious front
pocket with organizer trays and zipper.
This camera bag allows quick access, as the
top opens away from the body and stays
open in a fixed position.
With carrying handle, detachable, adjustable
and padded shoulder strap and belt loop.
Inside dimensions: 15.5 x 15 x 10 cm
(6.1 x 5.9 x 3.9 in.)
Camera Accessories
165
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 166
6066-71
„Tiltall“ Tripod
Sturdy camera tripod. Tripod legs and center
column made from aircraft aluminium and
carbon fiber respectively. Four-section tripod
legs with anti-twist protection and twist locks
for fast and easy operation. Spread angle of
legs can be individually adjusted and locked
in three positions, covered ratchet toothing
with release button. 180 degrees reversible
legs for reduced pack size. Rubber feet with
retractable metal spikes made from stainless
steel. Extendable center column with antitwist device, twist lock and spring loaded
hook. Reversible center column for macro
shots. Center column can also be removed
for close-to-ground level-setting. 1/4" - 3/8”
interchangeable thread. All tripod legs have
leg warmers made of foam layers covering
the top section. One tripod leg is detachable
and can be converted to a monopod by
adding the removable center column.
Comes with a padded carrying case with
adjustable shoulder strap and carry handle.
166
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 167
Code no.
6066
Type
TE-224
Material
Aluminium
Tube ø, max. (mm/in.)
22 / 0.9
Max. height (cm/in.)
140 / 55.1
Min. height (cm/in.)
14 / 5.5
Folded length (cm/in.)
40 / 15.7
Monopod height (cm/in.) 68-145 / 26.8-57.1
Weight (kg/lbs.)
1.1/2.4
Max. load (kg/lbs.)
8 / 17.6
Recommended ball head
BH-10 (6001)
Code no.
6069
Type
TC-224
Material
Carbon
Tube ø, max. (mm/in.)
22 / 0.9
Max. height (cm/in.)
140 / 55.1
Min. height (cm/in.)
14 / 5.5
Folded length (cm/in.)
40 / 15.7
Monopod height (cm/in.) 68-145 / 26.8-57.1
Weight (kg/lbs.)
0.9 / 2.0
Max. load (kg/lbs.)
8 / 17.6
Recommended ball head
BH-10 (6001)
6060-61
„Tiltall“ Monopod
6067
6068
TE-254
Aluminium
25.5 / 1.0
147 / 57.9
14 / 5.5
43 / 16.9
71-152 / 28.0-59.8
1.4 / 3.1
8 / 17.6
BH-20 (6002)
TE-284
Aluminium
29 / 1.1
162 / 63.8
15 / 5.9
47 / 18.5
78-169 / 30.7-66.5
1.8 / 4.0
12 / 26.4
BH-30 (6003)
6070
6071
TC-254
Carbon
25.5 / 1.0
147 / 57.9
14 / 5.5
43 / 16.9
71-152/28.0-59.8
1.1 / 2.4
8 / 17.6
BH-20 (6002)
TC-284
Carbon
29 / 1.1
162 / 63.8
15 / 5.9
47 / 18.5
78-169 / 30.7-66.5
1.4 / 3.1
12 / 26.4
BH-30 (6003)
Compact and sturdy monopod made from
aircraft aluminium (6060) or eight-layer carbon fiber (6061) respectively. Quick set-up
by simultaneous opening of all three twist
locks. Four sections with anti-twist protection, detachable rubber foot on stainless
steel spike, foam rubber leg warmer protects
against cold, wrist strap. Carry bag included.
Max. height: 162 cm (63.8 in.)
Pack size / min. height: 51 cm (20.1 in.)
Exchangeable threads: B 1/4 / B 3/8
6060: MP 284, max. load: 11 kg (24.2 lbs.)
Weight: 490 g (1.1 lbs.)
6061: MP 284C, max. load: 12 kg (26.4 lbs.)
Weight: 380 g (0.8 lbs.)
Camera Accessories
167
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 168
6001-03
„Tiltall“ Ball Head
Solid ball head for viewfinder cameras,
CSCs and DSLRs. Quick release system
with dovetail clamping and blocking screw.
Slide-off protection. Quick release plate with
non-slip surface, 1/4" D-ring screw with coin
slot. Adjustable friction. Locking knob with
inset tensioning dial for setting the “released”
tension. 360 degree panning socket with
blocking screw and graduated scale. All
locking knobs have rubber coated gripping
surface and are secured against unintentional removal.
Two spirit levels. 3/8” tripod bush.
Specifications:
Code no.
Type
Ball ø (mm/in.)
Socket ø (mm/in.)
Height (mm/in.)
Weight (g/lbs.)
Max. load (kg/lbs.)
6001
BH-10
30/1.2
45/1.8
92/3.6
360/0.8
8/17.6
6002
BH-20
36/1.4
51/2.0
98/3.9
440/1.0
10/22.0
6003
BH-30
44/1.7
60/2.4
107/4.2
570/1.3
12/26.4
6004-07
Quick Release Plate for
„Tiltall“ Ball Heads
With slip-off protection and 1/4" camera
screw, width 39 mm (1.5 in.), height 10 mm
(0.4 in.).
6004: length 40 mm (1.6 in.), aligned for 6001
6005: length 50 mm (2 in.), aligned for 6002
6006: length 60 mm (2.4 in.), aligned for 6003
6007: length 100 mm (3.9 in.), with additional
camera screw 1/4" for mounting a
lens with a tripod collar ring and with
3/8" exchangeable camera screw.
Any quick release plate is suitable for all
„Tiltall“ ball heads (6001-03).
168
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 169
6011
Professional Ball-and-Socket Head
Professional ball-and-socket head. Lever
screw for clamping the ball. Adjustable friction brake for presetting of friction. Rotating
panorama base with fluid system, fixing
screw and scale in three-degrees divisions
form 0° to ± 180°. Interchangeable camera
mounting thread 3/8“/ 1/4“. Tripod thread 3/8“
with 1/4“ thread adapter.
Weight: approx. 650 g (1 Ibs. 4 oz.)
Height: approx. 123 mm (4.8 in.)
Base diameter: approx. 56 mm (2.2 in.)
Loading capacity: 8 kg (17.6 lbs.) max.
6017
Ball-and-Socket Head
Medium-weight version. Lever screw for
fixing the ball. Rotating panorama base with
fluid system, fixing screw and scale in fivedegree divisions from 0° to ± 180°. Camera
mounting thread 1/4“. Tripod thread 3/8“ with
1/4“ thread adapter.
Weight: approx. 300 g (10.6 oz.)
Height: approx. 98 mm (3.9 in.)
Base diameter: approx. 45 mm (1.8 in.)
Loading capacity: 4 kg (8.8 lbs.) max.
6013/18
Ball-and-Socket Head
1/4“ connecting thread with lock nut. Handy
lever screw for clamping the ball. 3/8“ tripod
thread with 1/4“ thread adapter.
Weight: approx.
Height: approx.
Socket-ø: approx.
Max. load: approx.
6020
Quick Release Connector
6024
Quick Release Connector Plate
Camera Accessories
6013
Lightweight
model
6018
Mediumweight
model
45 g/1.6 oz.
50 mm/2“
24 mm/1“
1 kg/2.2 lbs.
110 g/3.9 oz.
67 mm/2.6“
30 mm/1.2“
2 kg/4.4 lbs.
6013
6018
For quick mounting of camera on tripod. The
upper part is mounted on the camera’s tripod
bush and stays there, the lower part is attached
to the tripod. Release lever with additional safety
lock, three spirit levels for precise positioning,
3/8" tripod thread with 1/4" thread adapter.
Connector plate with 1/4" threaded pin and
immersible anti-twist device. Made of aluminium
die cast. Dimensions: approx. 82 x 17 x 55 mm
(3.2 x 0.7 x 2.2 in.), weight: approx. 79 g (2.8 oz.)
6024
6020
Suitable for Quick Release Connector 6020.
169
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 170
6019
Swivel Joint
For small lighting units, light-weight cameras
etc.
Tilts continuously up to 90° and rotates up
to 360°. Central locking screw. 1/4" connection thread. Mounts on the accessory shoe
or a tripod. 1/4" tripod thread. Lock rings for
secure hold. Height: approx. 42 mm (1.7 in.)
5534
Focusing Stage
6029/32
Binocular Mount
For exact camera positioning for close-up, macro
photography and copying work. Two positioning
scales are perpendicular to one another. Setting
range 95 mm (3.7 in.) each. Prismatic precision guideways with micro adjustment by helical gear toothed
lath complete with lock screws and dials calibrated in
millimeters. Mounting plate with rubber pad. 1/4"
camera mounting screw, 1/4" connecting thread.
For mounting binoculars on tripods. 1/4“ tripod socket.
6029: Attaches via 1/4" mounting thread.
6029
6032: Attachment at center focusing. Span
range from 12 mm (0.5 in.) up to
20 mm (0.8 in.).
6032
3273
Accessory Bracket
6401
Assorted Screw and Thread
Adapters
Light metal bracket for mounting two accessories with tripod thread on a tripod, hand
grip or swivel joint. Two relocatable 1/4" tripod screws with soft washers. Center placed 1/4" tripod bush. Length: approx. 15.5
cm (6.1 in.). Width: approx. 2.5 cm (1.0 in.).
For mounting lights and other accessories.
Comprises: two shoe mounts, four lock nuts
and one knurled nut.
For detailed description see page 62.
6400
Assorted Screw and Thread
Adapters
6460
Bracket Screws
6461
170
6460
6461
Thread Adapters
Contents:
3 mounting thread adapters 1/4“- 3/8“
3 camera-case screws 1/4“ - 3/8“
3 camera-case screws 1/4“ - 1/4“
2 bracket screws 1/4“ - 3/8“
8 thread adapters 3/8“ - 1/4“
Aluminium thread stem, extruded plastic
body. ø 30 mm (1.2 in.). B 1/4“, A 3/8“.
Pack of two.
Made of nickel-plated brass. Outer thread:
3/8“, inner thread: 1/4“. Pack of 10.
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 171
6045
DSLR Table Top Tripod
With three-section telescopic legs and
extendable center column. 3-way pan head
with tiltable camera platform for portrait and
landscape shots. Built-in spirit level for exact
alignment. Center column with suction cup
for additional grounding on even and flat
surfaces in lowest position. 1/4" tripod
thread. Supplied incl. carrying pouch.
Max. load: 2 kg (4.4 lbs.)
Height: 18 to 30 cm (7.1-11.8 in.)
Folded length: 21 cm (8.3 in.)
6043-44
Multi-Level Table Tripod
Compact table tripod for digital compacts.
Three-section telescopic feet. 1/4" mounting
thread.
6043: Ball head with locking screw. Height
continuously adjustable from 8.5 to 26 cm
(from 3.3 to 10.2 in.). Length (folded): approx.
165 mm (6.5 in.), weight: approx. 100 g (3.5 oz.).
6044: With pan and tilt head and pan bar.
Height continuously adjustable from 8 to 27 cm
(from 3.1 to 10.6 in.). Length (folded): approx.
155 mm (6.1 in.), weight: approx. 185 g (6.5 oz.).
6049
Table Tripod
6050
6043
6044
Mini-tripod for compacts, microphones etc.
Flexible legs for leveled standing on uneven
surfaces. Pocket clip. Rubber feet. 1/4"
thread.
Height (positioned): approx. 12 cm (4.7 in.)
Weight: approx. 50 g (1.8 oz.)
5004
Pocket Tripod
Clamp-on and table-top tripod with ball-andsocket head and 1/4" connecting thread.
Screw-on clamp with 35 mm (1.4 in.) max.
span. Can be used as clamp-on stand after
unscrewing legs, which may be stored in the
stand's centre tube.
Height: approx. 125 mm (4.9 in.)
Weight: approx. 150 g (5.3 oz.)
Camera Accessories
171
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 172
6039
„Quik Pod DSLR Action“
Handheld Tripod & Monopod
Extendable hand-held tripod and monopod,
suitable for using cameras, camcorders and
smartphones at sports, action and outdoor
activities.
Allows for taking photos of oneself in front of
a favourite background and for shooting
from above, from below and around the corner. Also suitable for underwater use (complies with ASTM B117 / ISO 9227 saltwater
standard).
Tilt head with quick release adapter. Quick
release plate with ¼" connecting thread, can
be exchanged with adapter plate for
GOPRO® action cameras. A mirror surface
below the tilt head is useful for frame control.
Telescopic slide-out made from black anodized aluminium, with anti-twist protection and
quick release clamps. Handle with anti-slip
coating.
Completely extended and with mounted end
cap the "Quik Pod DSLR Action" becomes a
monopod.
Length:
min. 47 cm (18.5 in.)
max. 135 cm (53.1 in.)
Weight:
approx. 295 g (0.65 lbs.)
Max. load: 1.5 kg / 3.3 lbs. (hand-held)
3.5 kg / 7.7 lbs. (monopod)
Includes adapter plate for GOPRO® cameras, rubberized monopod end cap, waterresistant wrist strap, pocket clip, bumper
attachment, snap hook, key ring, tightening
tool and carrying bag.
172
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 173
6046
„Quik Pod pro+“ Handheld Tripod
Extendable hand-held tripod with telescopic
slide-out cameras and camcorders.
Allows for taking photos of oneself in front of
a favorite background and for shooting from
above, from below or around the corner.
Can also be used underwater.
Ball head with locking screw. Camera platform with “1/4” tripod thread.
Mirror surface below the ball head is useful
for framing.
Can easily be extended or folded.
Length (extended): approx. 46 cm (18.1 in.)
(folded): approx. 19 cm (7.5 in.)
Load capacity: max. 450 g (16 oz.)
Weight: approx. 100 g (3.5 oz.)
Includes belt clip, snap-hook, protective
cover, wrist strap and tripod feet to convert
Quik Pod pro+ into a table tripod.
Camera Accessories
173
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 174
6378
„Action Level Cross“
Digital Level
Cross indicator with 13 LEDs for simultaneous two-dimensional indication. Additional
7 LED side level indicator. Provides level
check for camera in landscape or portrait
position using LEDs with different colors.
LED brightness and tilting sensitivity can be
adjusted. Customized zero point setting.
Automatic power cut-off. Can be mounted in
the camera’s accessory shoe (not on
Sony/Minolta) or by means of a magnetic
support plate included. Connection and outlet for a second unit for remote control and
display if camera is in an awkward position.
Diameter: approx. 32 mm (1.3 in.)
Height: approx. 16 mm (0.6 in.)
Weight: approx. 6 g (0.21 oz.)
Max. sensitivity: ± 0.2°
Operating time: approx. 20 up to 30 hours
Scope of supply: Action Level Cross, 3 V
battery (CR 2023), magnetic base, connecting cable for second unit, strap, carrying
pouch.
6383
"Action Level Sound"
Digital Spirit Level
Can be used in portrait and landscape formats. Levelling is indicated by LEDs of different colors and/or varying beep sounds.
Brightness, sensitivity and signalling can be
adjusted. Fits in standard hot shoe (not suitable for Sony/Minolta cameras). Supplied with
additional magnetic support plate.
Extremely compact design. Does on most
cameras not interfere with the camera flash
when it pops out.
Dimensions: 32 x 25 x 17 mm (1.3 x 1 x 0.7 in.)
Weight: 5 g (0.18 oz.)
Max. sensitivity: ± 0.2°
Operating time: approx. 20 to 30 hours
Scope of supply: Action Level Sound, four
3 V batteries (CR 1220) – two of them spare
batteries, magnetic support plate, strap.
174
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:25 Seite 175
6387
Duplex Spirit Level
With twin levels and mounting feet for landscape and portrait position. Transparent housing. Attaches to the camera's accessory
shoe.
Dimensions: approx. 18 x 18 x 33 mm
(0.7 x 0.7 x 1.3 in.)
6385
Spirit Level
One level each for vertical and horizontal
shooting position. With mounting shoe and
1/4“ tripod bush.
Dimensions: approx. 20 x 25 x 35 mm
(.8 x 1 x 1.4 in.)
6380
Duplex Screw-in Spirit Level
With two levels for horizontal alignment.
1/4" threaded pin screws in camera's tripod
thread. 1/4" threaded hole for mounting on
tripods, brackets, holding arms etc.
The accidental position of the two levels to
the camera body due to the screw-in thread
can be adjusted by replugging the threaded
bolt.
Diameter: approx. 4 cm (1.6 in.)
Height: approx. 12 mm (0.5 in.)
6386
Spirit Level
Circular bubble, self-adhesive. For permanent attachment to cameras, tripods etc.
Can also be screwed on.
25 mm
(1 in.)
Camera Accessories
175
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 176
6126-27
„TwinLink T2Di“ Radio
and IR Flash Trigger
Set with transmitter and receiver for wireless
triggering of studio and camera flashes.
Simultaneous triggering via 2.4 GHz radio
frequency and infrared signals using eight
high performance LEDs. 32 user selectable
channels. Transmitter and receiver with
external aerials and LCD panels that can be
illuminated. Automatic power cut-down after
pre-determined time. Transmitter can be
attached using the camera’s hot shoe or
with an adhesive accessory shoe mount in a
convenient location.
Receiver with tripod thread and mounting
magnets for attachment on metal surfaces
or via an adhesive metal plate supplied with
the set. Receiver has a hot shoe and trigger
cable terminals for PC and 2.5 mm jackplug. Battery or mains operation (mains
adapter code no. 6142 not included).
Max. working range: indoor: approx. 50 m
(150 ft.), outdoor: approx. 200 m (600 ft.)
Max. sync speed: 1/250 sec. (depending on
camera and flash)
Dimensions: transmitter: 40 x 68 x 35 mm
(1.6 x 2.7 x 1.4 in.), receiver: 50 x 80 x
25 mm (1.9 x 3.1 x 1 in.)
Weight: transmitter: 35 g, receiver: 53 g
176
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 177
Scope of supply:
6126: „TwinLink T2Di“: transmitter and receiver, PC cord, trigger cable 2.5-3.5,
3.5-6.3 adapter plug, adhesive accessory shoe base, adhesive metal plate,
3 AAA batteries for receiver,
2 CR2032 batteries for transmitter,
receiver fixture clip.
6127: „TwinLink T2RxDi“: receiver, extends
"TwinLink T2Di", trigger cable 2.5-3.5,
3.5-6.3 adapter plug, adhesive metal
plate, 3 AAA batteries, fixture clip.
Important notes
Transmitter T2Txi and receiver T2RxDi from
the 6126 (T2Di) and 6127 sets are not compatible with the previous versions (transmitter
T2Tx and receiver T2RxD supplied under
code no. 6140 (T2D) and 6141). To find out
about correct type designation, please
check the label inside the battery compartment.
6142
Mains Adapter
For use with the "TwinLink T2RxDi" receiver
of the "TwinLink T2Di" flash trigger.
Camera Accessories
177
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 178
1405
PC-PC Coiled Cord
Spiral cord with male PC plug on both sides
to connect flashguns with PC port e.g. for
Nikon SB-24, -25, -26, -28, -28 Dx, -80 Dx,
-800, -900, -910 and Canon 580 EX II,
600 EX, 600 EX-RT.
Length (extended): 65 cm (25.6 in.)
1407
PC-PC Flash Cable
Flash cable with male PC plug on both sides
to connect flashguns with PC outlet to the
camera, e.g. Nikon SB-24, -25, -26, -28,
-28 Dx, -80 Dx, -800, -900, -910 and Canon
580 EX II, 600 EX, 600 EX-RT.
Length: 5 m (16.4 ft.)
1408-09
Flash Cable
Professional flash connecting cable with spiral coil for pull relief. Signal red, length
approx. 10 m (33 ft.).
1408: PC plug and jack plug ø 3.5 mm
1409: PC plug and jack plug ø 6.35 mm
1408
1420-26
Extension Cord
For connecting flash equipment. With rightangle plug and socket (PC).
1420: 0.5
1423: 2.0
1424: 3.0
1425: 5.0
1426: 10.0
178
m
m
m
m
m
( 1 ft. 8 in.)
( 6 ft. 10 in.)
( 9 ft. 10 in.)
(16 ft. 5 in.)
(32 ft. 10 in.)
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 179
1512
Clamp
For simple attachment of flashguns and
lightweight lighting units. Removable accessory shoe on ball joint. Tiltable to all sides in
infinite steps, lockable in any position.
Additional connecting thread 1/4“. With
reflector umbrella holder ø 9.2 mm. Clamp is
impact-resistant plastic with non-slip rubber
studs.
Clamp span: max. 40 mm (1.6 in.)
Height: approx. 90 mm (3.5 in.)
1322
Triple PC Flash Outlet
1311
Flash Socket
For simultaneous use of up to three flash
units with standard PC plugs.
Nipple to Standard DIN 19003 (PC) for
connecting flash equipment.
Package of 10 pieces.
1313
Flash Socket Adapter
1326
Right Angle Male Plug
Camera Accessories
For connecting flash equipment with standard PC plugs to Leica cameras of the
M1 - M3 series.
With plug to DIN 19003 (PC) for self-fitting to
flash cables. With soldering tags.
179
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 180
1201
Bounce Flash Shoe
For indirect flashing. With ball-and-socket
joint for stepless movement in all directions.
Accessory shoe detachable. 1/4” mounting
thread with lock nut. Reflector umbrella holder 9.2 mm diameter. For fastening to
accessory shoe or stands. Stand thread 1/4”
with removed slot-on foot 3/8”. Accessory
foot with fixing screw.
Height: approx. 95 mm (3.7 in.)
1503-04
Remote Flash Trigger
For wireless lag-free firing of a second flash
unit. Range up to 20 m (65.6 ft.) depending
on the guide number of the flash unit and
room brightness. 1/4" tripod bush. Features
an additional PC flash terminal to connect
another flash unit.
1503: for flash units with standard ISO foot
and hot flash contact
1503
1504: for flash units with 4-pin Sony/Minolta
foot
1504
1200
Bounce Flash Shoe
For indirect flash illmuniation. Steplessly
adjustable. With 1/4” tripod bush. Fits into
accessory shoe or tripods.
Height: approx. 45 mm (1.8 in.)
1216
Mounting Shoe
For mounting flash units on tripods and ball
joints. With 1/4" tripod thread.
Height: approx. 12 mm (0.5 in.)
Diameter: approx. 30 mm (1.2 in.)
1211
Accessory Shoe
For mounting flash guns with 1/4” thread.
With threaded pin (1/4”) and lock nut.
Height: 25 mm (1 in.)
180
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 181
1215
Sony/Minolta Accessory
Shoe Adapter
1300
Flash Shoe Adapter
Enables mechanical connection of accessories with standard ISO foot on cameras with
Sony-/Minolta flash shoe. Flexible tongues
on both sides provide for tight fit. No electrical contacts for flash units.
For cameras with hot flash shoe and flash
equipment without hot flash shoe. With synchro flash socket.
Height: 16 mm (0.6 in.)
1301
Flash Shoe Adapter
For cameras without hot flash contact and
flash equipment with hot flash contact. With
approx. 30 cm (11.8 in.) detachable syncro
cable, shoe mount and 1/4” tripod bush. Also
designed for attaching flash equipment with
hot flash contact on tripods.
Height: 16 mm (0.6 in.)
1303
Flash Adapter
For connecting flash guns to receivers of RC
remote releases, e.g. Kaiser TwinLink,
Pocket Wizard, Skyport, etc. Set consisting
of hot shoe adapter with tripod thread and
removable synch cord with 3.5 mm jack plug
and synch cord with 2.5 mm jack plug.
Receiver
with 3.5 mm or
2.5 mm jack
plug port
1304
Flash Adapter
Length of cables: approx. 30 cm (11.8 in.)
respectively.
For firing flash units with standard ISO foot
and center contact mounted on a Sony/
Minolta DSLR camera with proprietary 4-pin
foot.
Features an additional PC flash terminal to
connect another flash unit.
Camera Accessories
181
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 182
1000
Flash Bracket
Light metal bracket with resilient contact surface. Mounting screw with 1/4“ thread and
tripod bush.
Length:
Width:
1100
Angle Bracket
16.5 cm (6.5 in.),
2.8 cm (1.1 in.)
Collapsible. Grip with hand strap. Hinged
camera bracket of light metal with resilient
contact surface.
Mounting screw with 1/4“ thread and tripod
bush.
Length:
approx. 14 cm (5.5 in.)
Width:
approx. 2.8 cm (1.1 in.)
Height of grip: approx. 13.5 cm (5.3 in.)
1107
Angle Bracket
Collapsible. Hinged camera bracket of light
metal with resilient contact surface. Slide-in
foot for flash units or video lights.
Widened three-point rest on bottom side.
Camera with mounted bracket stands firmly
on flat surfaces.
Mounting screw with 1/4“ thread and tripod
bush.
Length:
approx. 16.2 cm (6.4 in.)
Width:
approx. 6.5 cm (2.6 in.)
Height of grip: approx. 15.1 cm (5.9 in.)
1108
Universal Accessory Bracket
Two-part angle bracket for mounting accessories such as flashguns, lights, microphones, GPS logger etc. on cameras and camcorders. The bracket can be aligned to the
camera in different ways.
Mounting screw with 1/4" thread. Attaches
to the tripod mount of the camera or camcorder.
Bracket has a removable securing pin as an
anti-twist lock and for precise positioning.
182
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 183
6601-02
„ProDisk“ Calibration Tool
Combination of white balance filter, grey card
and colour reference card in a slim, foldable
plastic housing. Colour card and grey card
located in lower resp. upper cover.
Translucent white balance filter with special
surface pattern.
Includes neck strap.
6601: ProDisk mini
White balance filter for lenses up
to 6 cm (2.4 in.) diameter
Dimensions (folded down): 103 x
73 x 10 mm (4.1 x 2.9 x 0.4 in.)
Weight: 75 g (2.6 oz.)
6602: ProDisk II
White balance filter for lenses up
to 9 cm (3.5 in.) diameter
Dimensions (folded down): 145 x
101 x 11 mm (5.7 x 4.0 x 0.5 in.)
Weight: 135 g (4.8 oz.)
6605-11
„Vivicap“ White Balance Filter
Snap-on filter with specially designed prism
structured surface for white-balancing of
digital cameras and camcorders. Easy to
use clamping mechanism provides for quick
installation and removal. Serves also as a
lens cap and can also be attached when a
lens hood is used.
6605:
6606:
6607:
6608:
6609:
6610:
6611:
Camera Accessories
ø
ø
ø
ø
ø
ø
ø
52
55
58
62
67
72
77
mm
mm
mm
mm
mm
mm
mm
183
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 184
6494
Memory Card Box
Flat metal box for secure storage of three
SD/Multimedia / xD / Memory Stick cards.
Dimensions: approx. 9.5 x 6 x 0.5 cm
(3.7 x 2.4 x 0.2 in.)
6495-96
Memory Card Box
Slim plastic box for secure storage of two
SD or CompactFlash memory cards.
Shaped rubber insert. Protects against
shock, dirt and moisture.
Reliable snap lock.
Dimensions: approx. 9.3 x 6 x 1.3 cm
(3.7 x 2.4 x 0.5 in.)
6495: grey
6496: neon yellow
6497
Battery Box
6389–90
Changing Bag
For 4 AA or AAA batteries. 2 pieces.
Stackable. Color: grey and blue.
For working with light-sensitive material
where no darkroom is available. Made of
special black light-proof fabric with rubber
lining. Infrared light-proof. With two hand
holes and light-proof zipper.
6389: approx. 68 x 76 cm (26.8 x 29.9 in.)
6390: approx. 40 x 43 cm (15.7 x 16.9 in.)
184
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 185
4129
Film Loader
For loading bulk 35 mm film into cartridges
in daylight. For bulk film material up to 30 m
(98 ft.). With frame counter and remainingfilm meter.
Dimensions: approx. 130 x 110 x 80 mm
(5.1 x 4.3 x 3.1 in.)
4127
Film Cartridges
4125
Film Cartridge Opener
For 35 mm film. For self-loading with bulk
film material. Plastic type, 5 pcs.
For opening 35 mm film cartridges.
Dimensions: approx. 140 x 40 x 40 mm
(5.5 x 1.6 x 1.6 in.)
4132
Film Leader Retriever
Camera Accessories
For extracting 35 mm film leader from cartridges into which the film has been wound.
Plastic casing with one fixed and one sliding
tongue. Simple use.
185
09_Aufnahmezub_en_0413_09_Aufnahmezub_en_0413 18.07.13 13:26 Seite 186
96653
Video-Transfer
For copying cinefilms (8 mm, 16 mm) and
slides on to video. Backprojection screen
with fine-grained 100 x 75 mm (3.9 x 3.0 in.)
viewing screen. Built-in reversing mirror for
true-sided image. Integrated close-up lens
with 55 mm (2.2 in.) diameter. Strong table
base with adjustable feet and spirit level on
base. Stepless height adjustment.
Dimensions (BxHxD) approx. 230 x 190
(230) x 142 mm (9.1 x 7.5 (9.1) x 5.6 in.)
96655
Video Transfer Set
Consisting of the video transfer unit 96653,
table stand 96654 for the camcorder, filter
adapter 96656 for projection lenses from
25 to 62 mm (1 to 2.4 in.) diameter and
close-up lens 2 (14249).
96654
Table Stand
Strong table stand with 1/4” mounting thread.
For stable positioning of camcorders, particularly when combined with the video transfer unit 96653. Table base with adjustable
feet and spirit level in base. Stepless height
adjustment from 96 to 136 mm (3.8 x 5.4 in.)
Dimensions (BxHxD) approx. 182 x 101
(141) x 117 mm (7.2 x 4 (5.6) x 4.6 in.)
96656
Filter Adapter
For fastening filters and close-up lenses with
49 mm diameter to projection lenses. The filter adapter is simply pressed on. It automatically adapts to lens diameters from 25 mm
to 62 mm (1 to 2.4 in.). Only suitable for lenses that project out of the projector casing
when in use.
96657
Filter Adapter Set
96653
186
96654
96657
Consisting of 96656 filter adapter and 14249
close-up lens. Used in conjunction with the
video transfer unit (e.g. Art. No. 96653) to
copy slides onto video when the slide projector does not focus down to short
distances and does not have a filter mount
for close-up lenses.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising