Configuration Manual For SCADA

Configuration Manual For SCADA
Configuration Manual For SCADA
iFIX v4.0
Configuration Manual for SCADA
Table of Contents
Table of Contents
Chapter 1 iFIX 4.0 ............................................................................................................ 3 1-1 OPC Server ............................................................................................................ 4 1-2 Connect OPC Client to OPC Server through iFIX 4.0............................................. 5 2
Chapter 1
iFIX 4.0
Configuration Manual for SCADA
iFIX 4.0
1-1 OPC Server
Please create tags according to the Configuration Manual.
Later, click [ File ] Æ [ Make Active ] to activate new created configuration file.
4
iFIX 4.0
Configuration Manual for SCADA
1-2 Connect OPC Client to OPC Server through iFIX 4.0
Start IFIX 4.0. Select [ SCU ] to set up OPC Client.
SCADA Configuration
5
Configuration Manual for SCADA
iFIX 4.0
Select “Enable” on [ SCADA Support ], and then click the “ ? “ nearby [ I/O Driver Name ].
Select “OPC Client v7.34a”; then click [ OK ].
6
iFIX 4.0
Configuration Manual for SCADA
Click [ Add ] to add the I/O Driver you need.
Click [ Configure…] to set up the DataItem connected to OPC Client.
7
Configuration Manual for SCADA
iFIX 4.0
Select the OPC Server or Remote OPC Server you need; than click “Connect…” . Later,
the Power Tool window will be opened.
Please select
to add the OPC Server.
8
iFIX 4.0
Select the OPC Server you need, and then click “OK”.
Select [ Enable ] to connect to OPC Client.
9
Configuration Manual for SCADA
Configuration Manual for SCADA
Click
iFIX 4.0
to create a Group.
Select [ Enable ] to connect to the group.
10
iFIX 4.0
Click
Configuration Manual for SCADA
to add a DataItem.
Define the name of the Item and select “Enable”. Click [ Browse Server ] to display all the
tags.
11
Configuration Manual for SCADA
iFIX 4.0
Select the Item to be connected with; then click [ OK ].
12
iFIX 4.0
Item ID will be defined automatically.
Save the settings.
13
Configuration Manual for SCADA
Configuration Manual for SCADA
iFIX 4.0
Select the location where the setting will be stored.
Click「Options」Æ「Setup」
14
iFIX 4.0
Define the name and location for Config File
Close Power Tool and SCADA Configuration.
15
Configuration Manual for SCADA
Configuration Manual for SCADA
iFIX 4.0
Start iFix 4.0
Click
to create tags and enable the connection with OPC Client.
16
iFIX 4.0
Click
Configuration Manual for SCADA
to create a new Tag.
Select the data type.
17
Configuration Manual for SCADA
iFIX 4.0
Define the Tag Name; select “ OPC Client” for Driver and type in its I/O Address. ( Note1)
Note 1:I/O Address format is Server;Group;ItemID[;AccessPath]
18
iFIX 4.0
E.g. the I/O Address of AI_01should be as follows:
Server1;Group1;Port1.Device1.AI_01;No Access Path
Click [ Save ].
19
Configuration Manual for SCADA
Configuration Manual for SCADA
iFIX 4.0
Click [ Database ] Æ [ Save ]; then close Database Manager.
Draw tags and make connections.
20
iFIX 4.0
Set up the property of Text1.
21
Configuration Manual for SCADA
Configuration Manual for SCADA
iFIX 4.0
Select the Tag to be connected and then click [ OK ].
Normal connecting status
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement