TK-7180(H)/8180(H)

TK-7180(H)/8180(H)
TK-7180(H)/8180(H)
VHF/UHF FM Mobile Radios
GENERAL FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
30/50 W (136-174 MHz)
30/45 W (450-520, 400-470 MHz)
Conventional & LTR® Zones
MPT1327 Trunking Option
Remote Control Head Option1
12 Character Alphanumeric Aliases
Backlit Dot Matrix LCD
3-Digit Sub-Display
Function / Status LCD Icons
RSSI Indicator
Date & 12/24 Hour Time Clock
Transmit / Busy / Call Alert / Warn LED
6 Backlit PF Keys
Emergency / AUX Key
Enhanced Kenwood Audio
Front Panel Speaker
Companded Audio
Voice Inversion Scrambler Built-in
Easy Option Port
Encryption / ANI Board Control
VGS-1 Voice Guide / Storage Option
Emergency Call Features
DTMF Encode / Decode2
Special Alert Tone Patterns3
Call Key4
Time Out Timer
Busy Channel Lockout
Timed Power Off
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DB-25 Accessory Connenctor5
9 Programmable AUX I/Os5
2 Programmable AUX Outputs5
Ignition Sense6
Public Address / Horn Alert Option7
MIL-Spec Standard Mic
MIL-Spec 12-Key DTMF Mic Option
Windows® Programming & Tuning8
Windows® Firmware Uploading8
Front Panel Test / Tune
Cloning
MIL-STD-810 C/D/E/F
MIL-STD “Driven-Rain”9
IP-54/55 Water & Dust Intrusion9
CONVENTIONAL ZONES
•
•
•
•
•
•
•
•
512 Channels / 128 Zones10
QT / DQT
Two-Tone Decode11
Single / Two-Tone Encode11
Operator Selectable Tone11
Dual Priority Scan
Single & Multi-Zone Scan
List Scan
TRUNKED ZONES
• 512 GID / 128 Zones10
• Kenwood LTR® Features12
FleetSync®
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FleetSync® or FleetSync® II13
PTT ID Digital ANI
Selective Call & Group Call
Status Messaging
Emergency Status
Caller ID Display
Short & Long Text Messages14
Power On/Off Status Messages
Input / Output Status Messages
FleetSync® GPS Ready15
Send GPS PF Key15
PTT ID & Emergency GPS Reporting15
Status Message Block GPS Reporting15
Ignition On/Off GPS Reporting6, 15
VGS-1 GPS Data Storage15,16
PC Serial Interface
MDC-120017
•
•
•
•
•
PTT ID Digital ANI
Caller ID Display
Emergency Status
Radio Check
Radio Inhibit
Options
■ KMC-35
■ KCT-40
Microphone
(supplied microphone)
■ KES-3
Radio Interface Cable
(for KDS-100, KGP-2A/2B)
■ KMC-36
■ KAP-2
Control Head
Remote Kit (23ft/7m)
■ KPS-10A
Voice Guide &
Storage Unit
DC Power Supply
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Specifications
Model
TK-7180
TK-7180H
TK-8180
TK-8180H
GENERAL
Frequency Range
Type 1
Type 2
Number of Channels*
Zone
Ch/GID
136~174 MHz
–
450~520 MHz 450~512 MHz
400~470 MHz
Max.128 per Radio
Max.250 per Zones
(Max.512 [Conv.Ch’s +GID’s] total per Radio)
*Maximum capability depends on the number of programmed Zone and repeater channels.
Applicable MIL-STD & IP
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Solar Radiation
Rain
Humidity
Salt Fog
Dust
Vibration
Shock
Model
TK-7180
Sensitivity (12dB SINAD)
Wide
Narrow
Selectivity**
Wide
Narrow
Intermodulation Distortion
Wide/Narrow
Spurious Response**
Audio Output
(4 Ω Impedance)
TK-8180
TK-8180H
0.25 µV
0.28 µV
80 dB
70 dB
75 dB (±50, 100 kHz)
90 dB
500.2/Procedure I, II
501.2/Procedure I, II
502.2/Procedure I, II
503.2/Procedure I
505.2/Procedure I
506.2/Procedure I, II
507.2/Procedure II, III
509.2/Procedure I
510.2/Procedure I
514.3/Procedure I
516.3/Procedure I, IV, V
85 dB
4 W with less than 5 % distortion
RF Output Power
Type 1
30 to 1 W
50 to 10 W
–
–
30 to 1 W
45 to 10 W
(490 -520 MHz:25 to 1 W) (490 -512 MHz:40 to 10 W)
Type 2
Spurious Response
Type of Emission
Wide
Narrow
FM Hum & Noise
Wide
Narrow
Microphone Impedance
Audio Distortion
Wide/Narrow
** Typical specifications
Specifications are subject to change without
notice, due to advancements in technology.
FleetSync ® is a registered trademark of JVC
KENWOOD Corporation in the United States
and/or other countries.
LTR® is a registered trademark of Transcrypt
International.
All other trademarks are property of their
respective owners.
MIL 810C
MIL 810D
MIL 810E
MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
500.1/Procedure I
501.1/Procedure I, II
502.1/Procedure I
503.1/Procedure I
505.1/Procedure I
506.1/Procedure I, II
507.1/Procedure I, II
509.1/Procedure I
510.1/Procedure I
514.2/Procedure VIII, X
516.2/Procedure I, II, III, V
80 dB
67 dB
TRANSMITTER (Measurements made per EIA/TIA-603)
500.3/Procedure I, II
501.3/Procedure I, II
502.3/Procedure I, II
503.3/Procedure I
505.3/Procedure I
506.3/Procedure I, II
507.3/Procedure II, III
509.3/Procedure I
510.3/Procedure I
514.4/Procedure I
516.4/Procedure I, IV, V
500.4/Procedure I, II
501.4/Procedure I, II
502.4/Procedure I, II
503.4/Procedure I, II
505.4/Procedure I
506.4/Procedure I, III
507.4
509.4
510.4/Procedure I, III
514.5/Procedure I
516.5/Procedure I, IV, V
International Protection Standard
Dust & Water Protection
TK-7180H
RECEIVER (Measurements made per EIA/TIA-603)
Channel Spacing
Wide
25 kHz, 30 kHz
25 kHz
Narrow
12.5 kHz, 15 kHz
12.5 kHz
Operating Voltage
13.6 V DC±15 %
Current Drain
Standby
0.4 A
0.4 A
0.4 A
0.4 A
Receive
1.0 A
1.0 A
1.0 A
1.0 A
Transmit
9.0 A
13.0 A
9.0 A
13.0 A
Duty Cycle
Transmit: 20 %
Operating Temperature Range
-22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Frequency Stability
±0.00025 % (-22 ºF ~ +140 ºF)
Antenna Impedance
50 Ω
Channel Frequency Spread
Type 1
38 MHz
70 MHz
Type 2
–
70 MHz
Dimensions (W x H x D),
6-5/16” x 1-3/4” x 6-3/16”
Projections not included
(160 mm x 45 mm x 157 mm)
Weight (net)
3.3 lbs. (1.5 kg)
FCC ID
Type 1
K4437303110
K4437303210
K4437313110 K4437313210
Type 2
–
–
K4437313120 K4437313220
IC Certification
Type 1
282F-37303110
–
–
–
Type 2
–
–
282F-37313120
–
Standard
GPS-2B
Line Noise Filter
■ VGS-1
Ignition Sense Cable
GPS Receiver /
GPS-2A
Modem Unit
(requires KCT-39 option)
■ KLF-2
Horn Alert/Public
Address Relay Unit
■ KCT-46
■ KGP-2A/2B
Key Lock Adapter
DC Cable (Remote
mount / 23 feet)
■ KRK-10
Mobile Data Terminal
■ KMB-10
■ KCT-23M3
Control Station
Desktop Microphone
■ KDS-100
External Speaker
(requires KAP-2)
DC Cable (Dash
mount / 10 feet)
■ KMC-9C
DC Power Supply
■ KES-5
■ KCT-23M
Keypad Microphone
■ KPS-15
External Speaker
P54: Radio itself
P54/55: Remote Head with KRK-10
*To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected.
30 to 1 W
45 to 10 W
70 dB
16K0F3E
11K0F3E
50 dB
45 dB
600 Ω
3%
footnotes from Front:
KRK-10 remote control kit required.
DTMF includes PTT ID, Emergency ANI, Manual Encode (KMC-36),
Auto-Dial (9 numbers) & Stun.
3
Special Alert Tone Patterns operate for 2-Tone, DTMF,
FleetSync® selective call decode.
4
Call Key: 6 keys max.; operates for 2-Tone, DTMF and
FleetSync status encode.
5
DB-25 ACC supports 15 Remote Zone/CH/GID selections,
KGP-2A/B (KCT-40 required), KDS-100 (KCT-40 required), data
modem, MDT, interconnect.
6
KCT-46 ignition sense cable option required; plugs into mobile
ignition sense pig-tail cable.
7
KAP-2 required: Horn Alert operates for FleetSync®, 2-Tone or
DTMF selective call decode.
8
KPG-89D required: Windows®98/ NT/ 2000/ Me/XP compatible;
English/Spanish screen languages.
9
MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion apply
to remote control head only; IP54 applies to radio chassis.
10
Conventional Zones: 512 Channels /128 Zones max. per radio;
250 CH max. per Zone Trunked Zones: 512 GID / 128 Zones
max. per radio; 250 GID max. per Zone.
11
Two-Tone Decode (4 sets x 4 pairs each); Single / Two-Tone
Encode (32 tones), Operator Selectable Tone (40 QT.DQT code pairs).
12
Kenwood LTR® Features include: GID Delete/Add, LTR® Talk
Around /Scan Revert Group Display, System Scan, Group Scan,
Auto Search.
13
FleetSync® & FleetSync® II are not compatible.
14
Short Text Messages are radio stored & LCD displayed; Long
Text Messages require a KDS-100 and KCT-40.
15
FleetSync® GPS features require an internal GPS board or
externally wired GPS receiver with NMEA TTL level serial data
output to the internal COM 1 or 2 set to "GPS".
16
Requires a VGS-1 option.
17
Either MDC-1200 or FleetSync® can be activated per radio.
1
2
ADS#30212 Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement