Dynex DX-55L150A11 55" Class Quick Setup Guide
Add to my manuals2 Pages
The Dynex DX-55L150A11 is a 55-inch 120Hz 1080p LCD HDTV. It comes with a variety of features, including:
- Three HDMI ports for connecting high-definition devices
- A component jack for connecting older devices
- A composite jack for connecting standard-definition devices
- A digital audio output for connecting to a home theater system
- A USB port for playing media from a flash drive or other USB device
- A built-in tuner for watching over-the-air broadcasts
The Dynex DX-55L150A11 is a great choice for anyone looking for a large, high-quality TV with a variety of features.
advertisement
55" 120Hz 1080p LCD HDTV
QUICK SETUP GUIDE
DX-55L150A11
VOL
TV INPUT
VIDEO COMP HDMI VGA
ZOOM
GUIDE
PICTURE AUDIO
INFO
MUTE
CH
MENU EXIT
ENTER
1
4
7
2
5
3
6
8 9
0 RECALL
CCD
MTS/SAP
SLEEP TIME
EN-31203B
Remote control and
2 AAA batteries
Composite cable
TV stand and screws
Quick Setup Guide
WE ARE GOING GREEN!
A copy of the manual is not provided in the box but is available at www.dynexproducts.com
Click Service & Support, enter your model number in the Product Search field, then click Search.
V1
FINAL
FOR PRINT
Front and side features
Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station
Using HDMI (best) Back of TV
Three HDMI jacks are also available on the back panel of the TV.
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE jack on the back of your TV and the RF OUT jack on the antenna.
Back of TV
Power indicator
Remote control sensor
Installing the stand
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV on a flat, cushioned surface.
3 Align the base with the bottom of the TV, then secure the base to the TV with the six screws provided.
HDMI device
HDMI cable
(not included)
Back of TV
Antenna cable
Connecting a home theater system
Using digital audio:
Back of TV
Using component (better)
A component jack is also available on the back panel of the TV.
Component video device
Component video cable
Audio cable
Digital audio out
Digital coaxial cable
Home theater system
Note: The DIGITAL OUTPUT jack only works with digital TV channels. Please refer to the User Guide for information on connecting to a home theater system using analog (stereo) audio or when using an HDMI device.
Connecting power
Connect the power cable to a power outlet.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2 Remove the pedestal stand. See “Removing the stand” in your User Guide.
3 Secure the wall-mount bracket to the back of your TV using the four screws provided with the bracket.
Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the component video and AV cables.
Using composite (good)
Back of TV
Video device
N
Composite audio/video cable
Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the composite AV cable. A composite jack is also available on the back panel of the TV.
Setting up your remote control
1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote.
2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information.
Click Service & Support, select Find my remote control code, enter model number in the Product Search field, then click Search. Remote control codes are near the bottom of the page.
Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
115 135 0464 8043
Comcast
M1057
0463
Set-top box makers and models
Dish Network
VIP508, VIP622
Motorola
DRC800
TIVO
Series 3, HD
720 0463 0091
DirectTV
RC23
10463
For step-by-step instructions on programming the remote control, see your
User Guide.
Turning on your TV for the first time
1 Make sure that you have inserted the batteries in the remote control, connected your devices to the TV, and connected the AC power.
2 Press (Power), then wait several seconds. The Initial Setup screen opens
(only the first time you turn on your TV). Follow the prompts to complete the setup.
Setup Wizard Language
Choose your menu Language
English
Espanõl
Français
Selecting the video input source
can also press any of the video source buttons directly.
TV
AV 1
AV 2
Component 1
Component 2
VGA
HDMI 1
HDMI 2
HDMI 3
HDMI 4
TV INPUT
Adjusting the volume
Sutup
Select ENTER Next
ENTER Select
3 Press or to select the menu language you want, then press ENTER. The
Picture Mode screen opens.
Screen Mode Normal
Time Setup
Caption
Retail mode
INPUT
Selecting a channel
Tip: If you are using a cable or satellite box, use the remote control that came with that device to change channels.
• To move to a different channel in the channel list, press CH^ or CH
OR
• Enter the channel number directly using the number buttons.
^
.
Sutup
Select ENTER Next
ENTER Enter
Back
Select
4 Press or to select the Home Mode or Retail Mode, then press ENTER.
Home Mode reduces the TV’s total power consumption. The Tuner Mode screen opens.
VOL
INFO
MUTE
CH
Sutup
Select
Screen Mode Normal
Choose your Tuner Mode
Time Setup
Caption
Cable
Cable/Satelite Box
ENTER Next
ENTER Enter
Back
Select
5 Press or to highlight Antenna, Cable, or Cable/Satellite, depending on the type of connection you have, then press ENTER. The Channel screen opens.
• If you are using an antenna for a standard or HD TV signal or if your cable
TV is connected directly to the TV (without a box), select Antenna.
• If a cable is connected to your TV, select Cable.
• If your TV is connected to a cable/satellite box, select Cable/Satellite Box.
6 Press or to select Scan, then press ENTER. The channel scan begins.
GUIDE
Press to change the volume.
Press to change the channel.
GUIDE
INFO
Viewing channel information
information banner shows the current program
information such as channel number, video input
source, and resolution.
INFO
• Digital mode information—Displays the channel number, station name, channel label, broadcast program name, TV rating, signal type, audio information, resolution, CC mode, signal strength, and current program start and end times.
• Analog mode information—Displays channel number, channel label (if preset), signal type, audio information, and resolution.
available programs, program times, and program summaries, depending on the information provided by the broadcaster.
Changing picture size
Press ZOOM repeatedly to cycle through the display formats:
ratio at the center of the screen.
On-screen menu overview
Video menu
Color
Tint
Audio menu
Setup menu
Parental menu
Channel menu
MTS/SAP
Custom
Navigating menus with your remote control
Press to display the Main menu.
MENU
ENTER
Press to select the menu items.
Press to select menus, to adjust selected items, or move the on-screen cursor left or right.
ENTER
ENTER Press to confirm your selection or enter a sub-menu.
EXIT Press to close the menu or return to the previous screen.
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features. At www.dynexproducts.com, click Service &
Support, enter your model number in the Product Search field, then click Search.
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
01 800-926-3020 (Mexico market)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia
Cruz Manca, Programa Parcial de Desarrollo Santa Fe, Delegación
Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 10-1137
5 5 " LC D T V I Q U I C K S E T U P G U I D E I DX- 5 5 L 1 5 0 A 1 1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project