Installation Guide N600 Wireless Dual Band Router WNDR3400v3 Step 1: Step 2: Step 3: Unplug the power to turn off your modem. Connect one end of the yellow Ethernet cable ( ) to your modem, and and the other end to the Internet port on your router. Plug in, then turn on your modem. Package Contents (not included) Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. DSL or cable Ethernet cable Internet Router stand (two pieces) Power On/Off N600 Wireless Router Power adapter Attach the stand to the router: Laptop or desktop computer Modem N600 Wireless Router (with stand attached) Step 4 4: Step 5: Step 6: Connect the power adapter to then router, then plug it into an outlet. Connect your computer to the router ( ). Open a browser. 1. Position the router so that the Power button is at the bottom and the US USB SB port is at the top. Wait for the 2.4 GHz LED ( 2. Snap each piece of the stand onto oa bottom corner of the router. If none of the LEDs light, make sure the Power On/Off button is in the on position (pushed in). 2.4 GHz ) to light. Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the product label. If the web page doesn’t display, close and reopen the browser and enter http://routerlogin.net in the address bar. The user name and password are on the product label. Preset Wireless Security This product has a unique WiFi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is on the product label. NETGEAR recommends that you do not change the preset SSID or password. If you do change the settings, the information on the product label does not apply. Connect Wireless Devices to Your Router Support Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers and other devices to your wireless network. Thank you for selecting NETGEAR products. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Find the preset wireless settings on your router and record them here: WiFi network name (SSID) _______________________________ Look for the preset NETGEAR wireless network name (SSID), and select it. Note: If you changed the name of your network during the setup process, look for that network name. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product’s user interface. Enter the preset password (or your custom password if you changed it) and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method Network key (password) ________________________________ If you change the preset wireless settings, record them here: 1. Press the WPS button on the router. 2. Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. For the free Live Parental Controls centralized Internet site filtering software for your router, download from: http://www.netgear.com/lpc. For additional features, including Traffic Metering, Readyshare, Guest Access, and others, log in to your router at: http://www.routerlogin.net. For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. Download the free Desktop NETGEAR genie: Internet WiFi Connection Router Settings STATUS GOOD STATUS Connected Click here Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it does not work. http://www.NETGEAR.com/genie Automatically fix common network problems and easily manage your home network connections. The device is then connected to your router. 3. If necessary to retrieve or update your password, type http://www.routerlogin.net in a web browser and log in using the default user name (admin) and password (password). For product updates, web support, and troubleshooting tips, visit http://support.netgear.com. NETGEAR recommends that you use only the official NETGEAR support resources. 3. Network key (password) _____________________________________ You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. The preset SSID is on the product label. If your wireless device supports WPS (Wi-Fi Protected Setup), NETGEAR calls this method Push 'N' Connect, you might be prompted to press the WPS button on the router instead of entering a password. If you are prompted: Wireless network name (SSID) _______________________________ After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. Network Map Parental Controls ReadySHARE Number of devices 16 Click here Click here Select Wireless Settings to locate your wireless password. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA April 2013 NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. For indoor use only. Valid in all EU member states, EFTA states, and Switzerland.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project