SATV/CATV - MCM Electronics

SATV/CATV - MCM Electronics
Section
13
SATV/CATV
SATV/CATV
A/V Distribution . . 237~241
A/V Switches . . . . . . . 236
Antenna
Installation . . . . . 223~225
Baluns . . . . . . . . 238~241
Digital Tuners . . . 228~229
Indoor Antennas . . . . . 229
DIRECTV® Standard Receiver
Outdoor Antennas 226~227
Radio Antennas . . . . . 228
RF Distribution . . 231~235
Satellite . . . . . . . 220~223
Satellite
Installation . . . . . 220~224
Satellite Radio . . . . . . 230
NEW!
H21 High-Definition Receiver
With the DIRECTV® D12 receiver,
you can access over 250 digital-quality
channels, plus access interactive
capabilities and a customizable on-screen program guide.
Explore and personalize all your viewing options quickly
and easily with the included remote control. Features:
•Interactive features include Mix Channels, DIRECTV®
Active, and MiniGuide •Parental controls to set rating
restrictions and spending limits •Programming options
like CHOICE, DIRECTV® Spanish, XM satellite radio
and pay per view movie and event channels Includes:
•Access card •Remote controls and batteries •A/V and
S-video cables •Phone and power cords •User guide
•This equipment is for use only with DIRECTV®
subscription television service and is subject to
DIRECTV's® terms and conditions •Mfr. #D12-300
With the DIRECTV® H21 receiver, you
can access over 265 digital-quality audio
and video channels from DIRECTV® in
both high-definition and standard definition Features:
•Versatile HDTV connection options include HDMI
digital audio/video and component video, as well as
standard composite video and RCA audio •1080i picture
output resolution formats •Dolby® Digital 5.1 surround
sound capable •MPEG-4 AVC capable Includes:
•Access card •B-band convertor •Remote control and
batteries •Component, S-video, and standard A/V cables
•Phone and power cords •User guide •This equipment is
for use only with DIRECTV® subscription television
service and is subject to DIRECTV's® terms and
conditions •Mfr. #H21
Order #
33-7701
Order #
33-7703
ONLY
$94.99
ONLY
$119.00
#33-7704
Slimline Dish and LNBF
13
•Dish kit includes mounting
brackets, arm, mast, and Slimline
reflector •Use dish kit with any of the LNBF options
•All LNBF units receive orbital 99°/101°/103° for
all DirecTV® standard programming •5-LNBF units
additionally receive 110°/119° for local HD programming
in some areas •SWM options for running single wire from
the dish to SWM compatible multi-switches and splitters
Order #
33-10990
33-10992
33-10994
33-10996
33-10998
Description
Slimline dish kit with mounts
3-LNBF, 4 outputs
3-LNBF, 1 output (SWM)
5-LNBF, 4 outputs
5-LNBF, 1 output (SWM)
ONLY
$69.99
39.99
89.99
59.99
99.99
NEW!
#33-10570
DIRECTV® R22 Receiver Plus DVR
#33-7706
High Definition HR21 Receiver
Add DIRECTV and DVR Service
and you get the best choice and widest
selection of high definition programming. Features:
•Standard-definition (SD) and high definition (HD)
enabled •Simultaneous SD and HD output •Record up to
200 hours of SD, or up to 50 hours of HD programming
•Two satellite tuners for access to SD and HD DIRECTV
programming •14-day Advanced Program Guide® •Pause
and rewind live TV for up to 90 minutes •Series Link®
feature •One touch record, auto record, manual record,
and bookmarks •Search and record •Interactive TV
enabled. •Mfr. #HR21 •This equipment is for use only
with DIRECTV® subscription television service and is
subject to DIRECTV's® terms and conditions
®
Order #
33-7704
33-7706
Description
HR21 high-def receiver
Dual ATSC add-on tuner
The DIRECTV Plus™ DVR receiver lets
you record up to 100 hours of programs,
and pause or control live TV. With the
R22 receiver you can automatically record an entire
season of your favorite shows, find and record programs
by title, actor, or director, listen to theater-quality Dolby®
Digital sound, and schedule recording up to 14 days in
advance. Includes: •Access card •Remote controls and
batteries •A/V and S-video cables •Phone and power
cords •User guide •This equipment is for use only with
DIRECTV® subscription television service and is subject
to DIRECTV's® terms and conditions •Mfr. #R22
Order #
33-7702
ONLY
$129.00
ONLY
$229.00
79.99
NEW!
Single Wire Multi-Switch
Dual ATSC Tuner for
DIRECTV Receivers
#33-7706
Professional HD-DVR
HR21PRO Receiver
The HR21 PRO is the high-end
DIRECTV® solution for professionally
installed home theater and commercial systems. Features:
•Rack mountable •View programming featuring 1080i high
definition video with Doby Digital 5.1 audio •Record up to
400 hours of programming (100 hours of HD) •Plan ahead
with 14 Advanced Program Guide® •Exclusive DLI optical
HDMI link allows for a remote television to receive
high-definition content through fiber optic cable up
to 1000' away •Outputs include: HDMI A/V, optical HDMI
A/V, S-video, dual component video, composite A/V,
optical digital audio (toslink), and coaxial digital audio
•Inputs include: Dual satellite, USB, RS-232C, IR, dual
ethernet, phone jack, SATA, and 120VAC Includes: •6'
HDMI cable •6' component video cable •6' composite A/V
cable •RF remote •Power cable •Rack mounting hardware
•DIRECTV® service and installation not included
Order #
33-10570
33-7706
page
220
Description
HR21PRO receiver
Dual ATSC add-on tuner
ONLY
$649.00
79.99
•Piggy-back tuner designed for seamless
use with DirecTV® receivers HR21 and
HR21PR •Receive local digital broadcasts from off-air
antenna and integrate them into the program guide
•Simple one-time set-up •Dual tuner enables off-air
HD-DVR capabilities with existing HR21 or HR21PRO
•Simple USB connection to main satellite receiver
•Dimensions: 15.125" (W) x 12.25" (D) x 1.18" (H)
Order #
33-7706
ONLY
$79.99
•Combine up to six LNB inputs
(flex ports 72.5°/95°, 5-LNB
99°/101°, 103°/110°/119°)
for a simpler, single wire installation into the home
•Two SWM outputs can be split with SWM compliant
high-frequency splitters for up to eight receivers or four
DVRs •DIRECTV® compatible DVRs receive both needed
signals from a single connection •Three legacy outlets for
older equipment •Off-air antenna diplexer included
•Power inserter required, sold separately
Order #
33-11000
33-11005
Description
Single wire multi-switch
28V power inserter
ONLY
$179.00
19.99
NEW!
NEW!
SWM
Expanders
SWM Compatible
Splitters
•Connect two or four SWM8
switches for up to 16 or 32
channels out •Mounts as one unit,
no additional chassis required •Requires 24V power supply
(two for #33-11020), sold separately
•High-frequency RF
splitters designed for use with splitting SWM satellite
signals •One port DC pass •DIRECTV® SWM approved
Order #
33-11015
33-11020
33-11021
Order #
33-11010
33-11012
33-11014
Description
Combines two SWM8
Combines four SWM8
24V power supply
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$129.00
169.00
49.99
NET 30
Terms
Customer Service: 1-877-626-3532
Description
2-way
4-way
8-way
ONLY
$5.99
8.99
15.99
SATV/CATV
Multi-Switches
NEW!
6 x 8 Multi-Switch
•Six satellite inputs:
four inputs from
101°/110°/119° and
99°/103°; two flex
port inputs from 72.5°
and 95° for international
and local programming •Passive unit powered by
connected satellite receivers •Wide band frequencies:
250~750MHz, 950~1450MHz, and 1650~2150MHz
Order #
33-11007
ONLY
$69.99
5 x 12 Multi-Satellite Multi-Switch
Four satellite IF and one terrestrial TV input to 12
outputs to satellite receivers. Built–in satellite IF amplifier
compensates for splitter loss. LNB selection by 14/18VDC
and 22KHz tone provided by equipped receivers. Built–in
power supply provides power for operation, amplification
and operation of the LNBs.
Order #
33-8690
(1-9)
$84.99
(10-up)
$82.95
In-Line Amplifiers
Order #
33-2720
(1-9)
$10.99
Satellite Diplexers
Wide Band 6 x 16 Multi-Switch
Features: •Six satellite inputs; four inputs for the
traditional 101°/110°/119°W LNBs, and for the two
additional Ka LNBs for 99°W and 103°W. •Two
additional FlexPort inputs commonly used to interface
additional DIRECTV® satellites at locations such as
72.5°W and 95°W. Specifications: •Input frequency
range: 250~2150MHz •Output frequency range:
250~2150MHz (each output) •Insertion loss: -7dB (min.)
•Cross polar isolation: 30dB min. •Current consumption:
250mA (typical) 300mA (max.) •Power adapter:
100~240VAC 50~60Hz input; 21VDC, 1.5A output
•22KHz tone output: 22 ± 4 KHz continuous, 650
±300mV p-p (power adapter included).
Order #
33-10300
ONLY
$199.00
5 x 8 Integrated
Multi–Switch
Order #
33-9665
ONLY
$84.99
The 4001IFD and 4002IFD
diplexers are used for
separating or combining
satellite signals at
950~2150MHz with VHF/UHF
signals at 54~806MHz. A DC
power pass is provided from the satellite port to the
common in order to pass satellite receiver LNB voltage.
The 4001IFD is Channel Master’s standard performance
diplexer. The 4002IFD offers higher performance (much
greater stopband rejection) necessary when combining
satellite and VHF/UHF signals on to one cable because
LNB noise extends down into the UHF spectrum and can
degrade UHF TV reception if not adequately filtered out
before connection to the distribution cable.
Order #
33-9415
33-9420
Mfr. #
4001IFD
4002IFD
ONLY
$4.49
10.99
VHF/UHF/Satellite
Diplexer-Mixer
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require satellite I.F. distribution from
950~2150MHz. The TSDM-2150 uses a rugged case that
allows for outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna: 40~860MHz
•Connectors: “F” type •EMI performance: >80dB
Order #
33-2710
(1-9)
$4.99
(10-49)
$4.79
(50-up)
$4.49
Diplexer
•Combines off-air signals with a
satellite drop •Power passive one
port •40~860MHz/ 950~2250MHz
•Includes grounding screw
(10-up)
$10.40
Order #
33-10975
MSRP
$4.99
(1-9)
$1.49
(10-24) (25-49) (50-up)
$1.42 $1.30 $1.17
Satellite Distribution Multi-Switches
Indoor/Outdoor
In–Line Amplifier
Amplifies satellite and terrestrial signals to compensate
for splitters and long cable runs. TERK amplifiers are
designed for optimum performance in TV and satellite.
Lesser quality amplifiers do not offer extended bandwidth
and gain flatness resulting in poor picture quality.
High-quality die–cast aluminum housing. Specifications:
Frequency range: 54~2150MHz. Slope compensation
gain: 11dB @ 54MHz, 20dB @ 2150MHz. Noise figure:
<5dB. Input/output impedance: 75ohm. Mfr. #BIA-20BP
Order #
33-7220
ONLY
$28.99
In-Line Amplifier
•In-line amplifier for
satellite cable runs greater
than 100' •20dB max slope
gain •For 900~2150MHz
Order #
MSRP
33-10970 $5.99
(1-9)
$2.99
(10-24)
$2.87
(25-49)
$2.76
(50-up)
$2.67
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Channel Master® Multi-switches are used to provide
satellite signals of either RHCP or LHCP polarization
from one dish at four or eight locations. In addition,
when required, they provide terrestrial VHF/UHF signals
diplexed on the same coaxial cable. At the customer outlet,
the satellite signals are separated from the VHF/UHF
signals with a diplexer such as model 4001IFD. Model
6214IFD and Model 6228IFD combine VHF/UHF
(54~806MHz) signals with satellite IF signals on one
cable to provide up to eight independently switchable
wideband outputs. Passive VHF/UHF processing allows
complete flexibility for VHF/UHF amplification. Models
6314IFD and 6328IFD amplify VHF/UHF (54~806MHz)
signals and combine them with satellite IF signals on one
cable to provide up to eight independently switchable
wideband outputs. They should be used when all desired
VHF/UHF terrestrial TV signals can be received
at comparable levels from a stationary antenna
or antenna system.
Order #
33-9490
33-9495
33-9500
33-9505
Mfr. #
Description Amplified Terr.
6214IFD
3 x 4
No
6314IFD
3x4
Yes
6228IFD
3 x 8
No
6328IFD
3 x 8
Yes
ONLY
$89.99
49.99
89.99
139.00
Drop Enclosures
These drop enclosures will
house and protect components
from the elements that corrode
and shorten their lives. Drop
A
boxes produce a professional
appearance for cable TV and
satellite installations. The
Omni II box offers simplicity
of installation and professional
appearance along with a
generous interior and the ability
to seal the box for drop security. B
The Residential Control Box is
designed to offer visual evidence of tampering and
provides for easy maintenance. All boxes are UV
resistant and come in a neutral gray color.
Fig. Order #
A
33-6945
B
33-6950
MCMelectronics.com
Email: quotes@MCMelectronics.com
Description
Omni II box
Residential
Control box
(H) x (W) x (D)
ONLY
5.75 x 5.0 x 1.25 $2.89
8.75 x 6.25 x 2.75 6.09
page
221
13
Features: Die-cast housing, low noise: 4dB, high gain:
20dB, passes DC through for powering LNBs, sloped
gain for long cable runs, voltage supplied by the satellite
receiver Specifications: •Noise figure: 4dB •Gain:
950MHz: 15dB, 1450MHz: 18dB, 1750MHz: 20dB,
2150MHz: 21dB •Maximum output: 30dBmV (12
channels) •DC voltage: 15~18VDC (negative ground)
•Connectors: “F” type
13
Diplexers
The BMS-58
allows up to eight satellite television receiver connections
to a single multi–satellite dish and provides an additional
off air antenna/cable input to integrate all television
options. Simply connect the two SatA and SatB cables
to the BMS-58 and run to the receivers.
In-Line
950~2150MHz
Amplifier
Section
Section
13
SATV/CATV
Satellite Signal Meters
Satellite Finder Meter
•Position and aim satellite
dishes with ease •Connects
between the LNB and
satellite receiver or 13~18V
power supply •Frequency
range: 950MHz~2.4GHz
•Gain: 11dB •Operating range: 52~60dB LNB gain
Satellite Signal Level Meters
The 1004IFD and 1007IFD are intended to aid in the
alignment of a satellite dish. They include satellite IF
(950~2150MHz) amplification and a broadband detector.
The detector drives a meter and a variable frequency
audio tone. The dish is then aligned for maximum meter
deflection or highest pitch tone. A gain control allows a
wide range of input signal levels. The units are connected
to the LNB via a short coaxial cable. The 1004IFD output
must be connected to the satellite receiver in order to
supply power. The units operate from 11~24VDC on the
coaxial cable. Connection to the receiver is optional with
the 1007IFD, but extends battery life between charges.
All models allow measurement of voltage on the coaxial
cable. The 1007IFD will also measure LNB current.
The 1007IFD includes an internal rechargeable battery
pack, carrying strap and a wall plug recharging unit. The
internal battery pack allows a dish to be aligned before it
is connected to the satellite receiver. The battery pack is
switchable between 13 and 18V output, allowing either
polarization to be selected when used with a voltage
switched LNB. In US DBS applications, LHCP
is selected when the LNB voltage is nominally 17V.
Order #
33-9295
33-9300
Mfr. #
1004IFD
1007IFD
ONLY
$59.99
139.00
Order #
33-10940
RF/Satellite Meter
This hand held CATV/satellite
meter has been designed for
the technician to make quick
and accurate signal strength
measurements for both CATV
and satellite. This powerful, simple
to use tool measures frequencies
from 25MHz~1550MHz.
•Measures satellite from
DIRECTV®, Dish-Network, CATV
and broadcast signal strength •Two
rows of ten easy-to-read indicator
lights •Hand held design, great for
use with HDTV •Includes 22KHz
tone generator for use with dual
satellite systems •Requires 9V battery
(included) •Mfr. #M200
Order #
33-9695
(1-9)
$379.00
13
Economical compass for easily
identifying satellite positions.
Small size fits in the palm of
your hand. Top closes to protect
surface from scratches. Specifications:
•Directional accuracy: ±5° •Direction indication: 2°/scale
•Dimensions: 72mm x 55mm x 30mm
ONLY
$2.99
Order #
33-1975
ONLY
$52.99
Acutrac®22 Digital Satellite Signal Level Meters
The Suunto Tandem is two precision
satellite tools in one. Slope/height
(inclinometer) measurements are easily
done through the sight to alert you to possible
obstructions. Accurate satellite bearings can be
found with the liquid filled precision compass.
Mfr. #PVCOMAF.
Order #
33-7420
LNBs
The satellite
finder kit
makes aligning
a dish simple
and easy. The
satellite finder
attaches to the output of the LNB or LNA and supplies
power to the LNB/LNA via the battery holder, or hook the
finder in-line with the receiver. Works with C or K band
satellites and DSS/DBS. Specifications: Frequency range:
950~1550MHz, power supply: 12~18VDC, 60mA, input
sensitivity: 62~80dB, impedance: 75ohm. Kit includes:
•Satellite finder, compass, RF jumper cable and battery
holder all in a vinyl carry case •Use #27-1335 battery
pack for DSS applications
(10-up)
$360.05
Suunto Tandem
Inclinometer/Compass­
Compass
Order #
33-2050
ONLY
$9.99
Satellite
Finder Kit
ONLY
$189.00
The Acutrac®22 allows an installer to easily align
a multi–feed system by displaying LNB A and LNB B
signal strength measurement levels simultaneously.
The Acutrac®22 features include: LCD display, selectable
audio on-off tone, receiver voltage output, individual LNB
current consumption, 22KHz tone and coax cable test.
Includes: Rechargable battery pack, leather case and
AC/DC chargers.
Order #
33-7395
Mfr. #
AcutracPro
ONLY
129.00
Satellite Installation Accessories
High Performance Dual LNB
DBS LNB for use with digital satellite
system dishes with rectangular shaped
tubes. Designed to work with “D”
shaped tubes as well. Perfect low cost
replacement for damaged LNBs.
Order #
33-7435
A
ONLY
$21.99
C
D
B
TennaMount
A strong stable mounting
system that supports
both DBS and VHF/UHF
antennas in one convenient
location. Installs quickly and
easily to the side wall of a
building, and adjusts easily
to roof overhangs. It can be
wired with back–to–back
splitters so all DBS, VHF
and UHF signals travel
on one RG-6 cable. All
mounting hardware supplied.
Order #
33-2630
Precision C and Ku Band LNBs
page
222
Noise Input Output
Band Figure Freq.
C
17K 3.7~4.2
C
15K 3.4~4.2
Ku
0.6 11.7~12.2
Ku
0.5 11.7~12.2
Freq.
.950~1.45
.950~1.45
.950~2000
.950~2000
ONLY
$24.99
34.99
32.49
38.99
1-800-543-4330
Fax: 1-800-765-6960
•Adapt existing pipes and masts to work with satellite dish
mounts •Heavy gauge steel •1.66'' outer diameter
•Tightens with two bolts
Order #
33-10890
ONLY
$52.49
“C” and “Ku” band LNBs for use with “C” band antennas.
Professional feedhorns and commercial grade LNBs assure
high performance with low noise. Input and output
frequencies are in GHz.
Fig.Order #
A 33-4695
B 33-4700
C 33-4705
D 33-4710
Satellite Dish Pipe Adapter
(1-9)
$1.99
(10-24)
$1.89
(25-49)
$1.74
(50-up)
$1.57
Siding Mount Block
•Clean and protective solution for mounting a satellite dish to vinyl siding
•Prevents insect infestations and weathering•Comes in three styles to fit
most aluminum and vinyl siding •White
Order #
33-10560
33-10561
33-10562
Description
Fits double 5⁄8 lap 4" siding
Fits 1⁄2 or 5⁄8 lap 5" siding
Fits Dutch lap siding NET 30
Terms
Customer Service: 1-877-626-3532
Dimensions
10" x 7"
12" x 8"
12" x 8"
ONLY
$8.99
8.99
8.99
SATV/CATV
Satellite and Antenna Installation
Section
13
3' Tripods
•Used for
mounting TV
antennas and
satellite dishes
permanently or
for temporarily
use •Fits masts up
to 15⁄8" (included
with portable unit)
#33-10910
#33-10905
•Standard tripod
uses six bolts to tighten down on mast, and can be
anchored on all legs with three lag bolts each •Portable
unit has integrated compass and bubble level, folds up
for easy transportation, and secures to ground with
anchor screw
J-Pipe Mount
•Versatile all-in-one mount that can be used with
antennas or satellite dishes •Can be mounted on
the roof, wall, chimney or any other flat surface
•J-pipe is reversible from mounting foot for a
variety of positioning options •Gray weatherproof
coating •38" mast height •15⁄8" mast diameter
Order #
33-10915
(1-9)
$11.99
(10-24)
$11.35
(25-49)
$10.44
(50-up)
$9.40
Order#
Description (1-9) (10-24) (25-49) (50-up)
33-10905 Standard $14.99 $14.39 $13.81 $13.40
33-10910 Portable
15.99 15.35 14.74 14.29
Non-Penetrating Roof Mount
•Perfect solution for commercial buildings and other flat
roofs •For 18" and 24" dishes •Uses six 8" x 8" x 16"
cinder blocks for stability •Powder coated for weather
durability •Angle iron frame
Order #
33-10565
ONLY
$31.99
B
A
A
Masts
16 gauge corrosion protected mast ideal for television and
communication antennas. 5' section swagged at one end.
21⁄2' section ideal for use above rotator.
D
Order #
30-1080
30-935
C
Size
21⁄2'
5'
ONLY
$6.99
11.99
•Heavy–duty mount for masts up to 11⁄2" outer
diameter •Made of all steel construction •Triple
coat corrosion protection
Order #
30-895
30-910
30-915
30-1160
Description
Roof mount
“Z” chimney mount
“Y” chimney mount
Vent pipe mount
B
C
Description
Qty. ONLY
Guy wire clamp up to 11⁄2" mast
1 $3.58
Turnbuckle - 7" open, 5" closed
3
4.09
Cable clamps 1⁄2" open 1⁄8" closed 3
1.53
Guy Wire
ONLY
$6.65
10.99
22.99
10.49
•18 gauge, 6 strand heavy-duty guy wire
•Vinyl coated to reduce effects of weather •Length: 100'
Order #
30-1055
ONLY
$11.99
Pitch Pad Kit
•Pitch pad and lag bolt
kit •Pads reduce risk of water
leakage •Use when mounting
antennas on roof •Contains
six lag bolts
Order #
30-940
ONLY
$3.06
#33-10885
#33-10880
#33-10882
#33-10920
Mast Mounts
•A variety of mast mounts for finding the perfect location to mount and antenna or satellite dish
•All mount fit up to a 11⁄2" mast •Eave mount adjusts from 46"~68" span
Order #
33-10880
33-10882
33-10885
33-10925
33-10920
Description
4" wall mount
8" wall mount
Adjustable eave mount
Chimney mount
U-bolt
(1-9)
$3.99
5.99
10.99
8.99
1.49
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(10-24)
$3.83
5.75
10.55
8.63
1.42
(25-49)
$3.68
5.52
10.13
8.29
1.30
(50-up)
$3.57
5.35
9.82
8.04
1.17
Concrete 1⁄4" Anchor Kit
Widely used for many types of SATV and security
installations. Kit contains: •100 1⁄4" pan-head screws
•100 #8 plastic anchors •One masonary drill bit (1⁄4")
Order #
28-11076
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$3.99
page
223
13
Fig.Order #
A 30-1030
B 30-1035
C 30-1045
Heavy–Duty Antenna Mounting Accessories
Fig.
A
B
C
D
Antenna
Mounting
Hardware
SATV/CATV
Section
13
Single
Grounding
Satellite and Antenna Installation
Dual
Single
Dual
with ground with ground
Cable Clips
Available
in White
•Make any cable run look
neat and secured in place
by attaching coax or telecom
cabling to walls and trim with
high-impact plastic cable clips
•Each clip includes a plated steel
nail •100 clips per package
Feed-Through Cable Bushings
•Gives a finishing touch and protection to through-wall
cable installations •Available in single, dual, and
ground-wire knock-out configurations •100 per package
Order#
33-10870
33-10871
33-10872
33-10873
33-10874
33-10875
33-10876
33-10877
Description
Single, white
Dual, white
Single, black
Dual, black
Single with
ground, white
Dual with
ground, white
Single with
ground, black
Dual with
ground, black
(10-24)
$2.87
2.87
2.87
2.87
2.87
(25-49)
$2.76
2.76
2.76
2.76
2.76
3.49
3.35
3.22
Single
2.99
2.87
2.76
Flex Cable Clips
3.49
3.35
3.22
•Flexible black boot slides over
cable and connection to protect
it from outdoor elements •UV
resistant •2" length •100 per package
MSRP
$19.99
Description (1-9) (10-24) (25-49) (50-up)
Single, white $1.99 $1.89 $1.74 $1.57
Dual, white
2.49
2.37
2.18 1.96
Single, black 1.99
1.89
1.74 1.57
Dual, black
2.49
2.37
2.18 1.96
(1-9)
$2.99
2.99
2.99
2.99
2.99
Weather Boot
Order #
33-10950
Order #
33-10850
33-10852
33-10854
33-10856
Order #
33-10860
33-10862
33-10864
33-10866
13
Order#
33-10825
33-10830
33-10835
Wire Size
4 AWG
6 AWG
8 AWG
(10-99)
-
$1.91
(100-up)
$1.83
(1-9) (10-24) (25-49) (50-up)
$0.99 $0.94 $0.87 $0.78
0.99 0.94
0.87 0.78
0.99 0.94
0.87 0.78
Description (1-9) (10-24) (25-49) (50-up)
Single, white $2.99 $2.87 $2.76 $2.67
Dual, white
2.99
2.87
2.76 2.67
Single, black
2.99
2.87
2.76 2.67
Dual, black
2.99
2.87
2.76 2.67
Ground Clamps
Flat Coax Jumper
•Thin, flexible coax coupler
allows you to run cables through
closed windows or other narrow gaps
•Peel-and-stick adhesive keeps jumper in
place •Conforms to any angle •8'' length
MSRP
$4.99
(1-9)
$1.49
(10-24) (25-49) (50-up)
$1.42 $1.30 $1.17
•Used to properly ground
antennas and satellite
dishes to ground rods
or other electrode points
•Available to fit 5⁄8''
and 3⁄8'' ground rods
Order #
33-10840
33-10845
Size
3
⁄8''
5
⁄8''
(1-9)
$1.49
1.99
(10-24)
$1.42
1.89
(25-49) (50-up)
$1.30 $1.17
1.74
1.57
CATV Security Tool
•Precision machined,
high-quality security
tool for connecting and
disconnecting cables
protected by a security
sleeve •Long shaft fits
all types of sleeves
•Hand-moldable plastic seal
is perfect for sealing outdoor
connections and cable splices
•60'' length
(10-24)
$1.91
3.35
(1-9)
$0.59
1.99
•For copper wire grounding
connections and splices •Available
for 4, 6, and 8 gauge solid copper wire
•Remarkably strong flexible clips grab cables without
damaging them •Integrated Philips hex-head screws make
installation quick and easy •100 clips per package
(1-9) (10-24) (25-49) (50-up)
$6.99 $6.71 $6.44 $6.25
(1-9)
$1.99
3.49
Order # Description
33-7705 Single
33-7710 Dual
Dual
COAX-SEAL
Width
1
⁄2"
1
⁄5"
High frequency
ground blocks have
extended frequency capacity to 2.4GHz making them
perfect for satellite and digital applications. Nickel plated
finish to resist effects of the weather.
Copper Split Bolts
Order #
33-10935
Order #
33-10945
21-1140
High Frequency
Ground Blocks
(25-49) (50-up)
$1.83 $1.78
3.22
3.12
Order #
33-0025
33-0030
Description
Security tool
Security sleeve
ONLY
$7.09
0.54
Pipe Clamp
Used to properly ground
to copper water pipes.
Order # 33-10805
(1-9)
$1.29
(10-24)
$1.23
(25-49)
$1.13
(50-up)
$1.01
Nylon Cable Clamps
Standard screw mount
clamp holds wire up to
1
⁄2" diameter. Natural color.
50 per bag.
SnapToggle® Heavy-Duty Anchors
Turn a two person job into a one person
job and get the job done faster. You can
even pre-install without using a bolt for
final installation later. The SnapToggle®
anchor is a convenient, reliable, accurate,
easy-to-use anchor, and the strongest
toggle bolt in the smallest hole.
Order #
28-11025
28-11026
28-11030
28-11031
page
224
Mfr. #
43321
25014
43311
25013
Description
Quantity
w/ 1⁄4" x 20 bolts
10pk
w/o 1⁄4" x 20 bolts
50pk
3
w/ ⁄16" x 24 bolts
10pk
3
w/o ⁄16" x 24 bolts
50pk
ONLY
$8.99
29.99
8.99
29.99
Order # I.D. Width (1-4 bags) (5-9 bags) (10 bags-up)
21-3668 1⁄8" 3⁄8" $2.39 $2.27 $2.16
21-3672 1⁄4" 13⁄32" 2.49 2.10 1.79
3
1
21-3676 ⁄8" ⁄2" 2.79 2.65 2.52
21-3680 1⁄2" 1⁄2" 2.99 2.88 2.67
Self Adhesive
Cable Tie Mounts
#21-3684
#21-3686
#21-3688
#21-3690
Order # Color 21-3684 Natural 21-3686 Black 21-3688 Natural 21-3690 Black Nylon tie mount base accepts
standard cable ties up to 3⁄16" wide.
Self adhesive backing attaches to
any smooth surface. 100 per bag.
Available in black or natural color.
Base
DimensionsPrice Per Bag
(mm) (1-4) (5-9) 21 x 21 $9.49 $8.49 21 x 21 9.49 8.49
28 x 28 13.99 12.95 28 x 28 13.99 12.95 1-800-543-4330
Fax: 1-800-765-6960
(10-up)
$7.19
7.19
11.95
11.95
4" Grounding Rod
•Used to ground outdoor antenna and satellite sytems
•Use with proper grounding wire and clamps for a
complete ground •High-strength steel with copper
top layer •11⁄32" thickness
Order # 33-10810
(1-9)
$2.99
(10-24)
$2.87
(25-49)
$2.76
(50-up)
$2.67
Copper Grounding Straps
Wraps around and tightens to pipe, conduit
or other electrode to connect grounding wire.
Order #
33-10815
33-10820
Length
6"
12"
(1-9)
$0.59
0.69
NET 30
Terms
Customer Service: 1-877-626-3532
(10-24) (25-49) (50-up)
$0.56 $0.50 $0.47
0.63
0.56
0.53
SATV/CATV
Rotators
Section
Antenna Amplifiers
13
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine cut
gears won’t bind •Brake pads
hold firm •Tested to 70 mph
winds •Requires three–wire
rotator wire (#24-3080)
Order #
30-1020
ONLY
$64.99
Economical
Antenna Rotator
Outdoor Mast
Mounted Amplifier
Our economical
antenna rotator helps
improve TV and FM
reception. Two piece
connects via three
wire rotator cable.
Adjustable clamp
accommodates
mast up to 11⁄2".
This powerful UHF/VHF antenna
signal amplifier is designed to overcome signal loss related
to long cable runs, splitters, and junctions. While an
amplifier will not create a signal, it will increase its
power and minimize disruptions. Kit includes mast mount
amplifier, 110VAC power inserter,and 6' coaxial cable.
Frequency range: 40~862MHz. 18db gain. Mfr. #PA18.
Order #
30-1100
ONLY
$59.99
Rotator Cable
Three conductor
cable for use with
many popular antenna rotators. Outer jacket 0.162" black
PVC with 0.020" wall. Three 20AWG conductors color
coded black, white and red.
Length 100'
500'
1000'
(ea.)
$25.99
111.00
199.00
(2-4)
$22.34
101.94
183.49
(5-up)
$20.80
94.25
169.65
Order #
30-2091
ONLY
$49.99
In-Line
Amplifier
DC line powered amplifier for CATV or antenna
applications. Bandwidth is 5~950MHz. Gain is 10dB.
Use with #33-915 power supply.
Order #
33-2690
(1-9)
$11.99
(10-up)
$11.50
The Titan range of mast mounted amplifiers has been
completely re-engineered and updated. These amplifiers
represent the ultimate in preamplifier performance. They
are designed for use as an ultra low noise, ultra high gain
preamplifier for deepest fringe applications and MATV
headend applications. Their very high signal handling
also makes them suitable for use as a mast mounted, ultra
low noise distribution amplifier for use in small MATV
systems. Both models feature 75ohm, input and output
connections in line with modern headend engineering
practice. Models 7777 and 7778 cover both VHF and
UHF bands with separate amplification in each band
for maximum signal handling. They may be configured
for either separate or combined VHF and UHF inputs.
They include a switchable FM trap.
Order #
33-8960
33-8965
•All-weather antenna combiner
merges the signals from a UHF antenna with a VHF
antenna on the same down lead •Ideal for FM reception
and markets with high band VHF HDTV channels
•Threaded “F” connectors •Mast-mount weatherproof
housing •Adjustable mast clamp •75ohm output
Order #
30-2113
ONLY
$17.99
Order #
33-10400
ONLY
$6.39
Push-On Balun
(5-9)
$0.45
(10-up)
$0.42
Indoor Matching
Transformer
•UHF/VHF/FM
75~300ohm matching transformer •“F” type input,
300ohm twin lead output •Minimum five
Order #
33-050
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$67.99
59.99
(5-9)
$1.09
(10-99)
$0.89
In-Line Amplifiers
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB •Maximum
input: 20dB •Maximum output: 31dB
•Noise figure: 4dB •Power
requirements: 15VDC •Dimensions:
21⁄2" (L) x 5⁄8" (dia) #33-910 DC Passive: For satellite
70MHz in-line amplification when power dividers, low
gain LNAs and down convertors require additional gain.
#33-917 Non-Passive: For MATV/CATV applications
when antenna preamplification and line amplification is
required. #33-915 Power Supply: Provides power supply
(15VDC) and diplexer for #33-917 and 33-910.
Order #
33-917
33-910
33-915
•Quick connect for “F” fittings with
impedance matching transformer
•Minimum five
Order #
33-010
UHF Gain
26dB
23dB
#33-915
Protect your cable
modem, tuner,
convertor, decoder,
and satellite receiver
from power surges and
spikes caused by lightning strikes. Plugs directly into
coax line. Specifications: •Frequency range: 5~2,400MHz
•Insertion loss: 1.5dB max •Max surge current: 5000A
UHF/VHF Antenna
Mast-Mount Combiner
VHF Gain
23dB
16dB
#33-917
#33-910
In-Line Surge
Protector
Closed
Mfr. #
7777
7778
13
Order #
24-3080
24-3085
24-3090
TITAN 2TM Mast Mounted Preamplifiers
(100-up)
$0.79
Type Non-Passive Amp
DC Passive Amp
Power Supply
(1-9)
$12.99
6.99
14.49
(10-up)
$11.41
6.64
13.29
Outdoor
Matching
Transformer
•Weather resistant, molded plastic construction
•Supplied with rubber boot
Order #
33-040
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1-4)
$1.99
(5-9)
$1.89
(10-49)
$1.80
(50-up)
$1.71
page
225
SATV/CATV
Section
13
Outdoor Antennas
Compact HDTV Antenna
NEW!
•Extremely low profile design
can be mounted indoors or
outdoors •Extremely low
noise amplifier is designed
for the latest digital and highdefinition television reception
•20dB gain •UV resistant case
Includes: •Antenna •Flexible
arm mounting base •Power
inserter •AC adapter •Coax
cable •Mounting hardware
Order #
30-2205
ONLY
$24.99
UHF Indoor/Outdoor Antenna
Easiest and best solution for urban/
surburban UHF DTV (digital TV) reception.
Perfect alternative to conventional outdoor
antennas. Features: •Built-in optimum gain
amplifier, 18dB UHF, with low noise
circuitry, under 3.5dB, for best possible
DTV performance •Efficient flat panel UHF
array, up to 40 miles range •Compact yet
effective size, 5" x 10" •Easily mounts on
wall, mast or railing •Can be used with rotor
(optional, mast only) •Ideal for RV or boat.
Includes 20' cable, power injector, power
supply, and flexible mounting kit.
Order #
MANT940
TV55 Antenna
HDTV Amplified Outdoor Antenna
The Terk HDTV is an innovative,
compact, amplified outdoor antenna that features powerful
high gain, and offers versatile installation flexibility.
Its unique design incorporates a highly directional log
periodic antenna array and a pair of curved elements that
combine to capture and focus HDTV signals. Mount flush
to the side of a building, or use the included multi-mount
mini-mast and base to install virtually anywhere.
Order #
30-2020
Order #
30-1525
Omni–State Omni–
Directional Antenna
#PR-7015
13
Prostar 1000
VHF/UHF/FM Antennas
Ultra-Hi Crossfire™
HDTV/UHF/VHF/FM Antenna
•Exceptional outdoor reception of VHF/UHF channels
2~69, and FM •Deep fringe rated •Connects to either
75 or 300ohm downlead •Directional beam width
of approximately 30°
Order # Mfr. #
Max Range
30-2140 CM-3671 100 miles
30-2145 CM-3679 60 miles
#30-1635
The Omni–State antenna
provides excellent reception
of VHF and UHF channels
in most viewing locations.
Measures 21" in diameter
and has a 20dB built–in amplifier.
Operates on 120VAC with
the supplied adaptor.
#PR-7052
NEW!
#30-2145
Dimensions
(L) x (W) x (H)
ONLY
173" x 110" x 35.4" $189.00
122" x 110" x 35.4" 129.00
ONLY
$73.99
#PR-7042
#PR-7010
ONLY
$36.99
#30-2140
ONLY
$119.00
The TV55 indoor/
outdoor amplified antenna
is optimized for HDTV reception.
The TV55’s helical coil technology and
patented dual–mode ultra–low–noise amplifier
provide clear, powerful reception of HDTV and
analog VHF/UHF broadcast signals, and its slim-profile
design allows easy mounting. Accessories included: (1)
power injector with 110VAC to DC power adapter, (1)
1
⁄4-20 x 11⁄2" hex-head bolt, (1) 1⁄4-20 21⁄2" hex-head bolt,
(1) mast mount base, (2) 1⁄4-20 x 3⁄4" hex-head bolts, (1)
mast mount cover, (1) 1⁄4-20 wing nut, (2) window mount
brackets (2-piece assemblies), 1⁄4"-20 hexagon nuts, (2)
wall mount cam-lock units, (2) #10 x 21⁄2" flat-head
screws, (1) channel insert, (2) #8 x 11⁄2" flat-head screws,
(1) 93⁄4" flat coaxial cable, (2) 1⁄4" split washers, (1) 36"
RG-6 coaxial cable, (2) #10 plastic wall anchors.
Mfr. #TV-55.
•300ohm output •Digital ready •Die cut impedance
correlators allow close spacing of antenna elements
manufactured from high tensile aluminum •Withstands
strong wind and ice •Aluminum is protected with
high-quality polymer finish to protect for oxidation
•Exlusive wrap-around mast clamps can not
crush antenna or boom mast
Order #
30-1335
ONLY
$74.99
Active
VHF
UHF Boom
Order # Elements Elements Elements Length ONLY
PR-7010 22
9
13
66.5" $69.99
PR-7015 31
12
19
87.75"
99.99
PR-7042 43
17
26
149.75" 169.00
PR-7052 49
21
28
170.25" 209.00
#30-840
#30-1645
#30-850
STEALTHtenna™
UHF/VHF Antenna
Advantage
Series Antennas
The Advantage line of
#30-1655
antennas was designed with
the Do–It–Yourself installer in mind. All models are
UPS shippable and will fit in most any vehicle. Superior
performance, economy, pricing, and pre-assembled
for ease of installation, make this antenna line the
perfect choice for the self-installer. Includes balun,
weather boot and S clip.
Order #
30-1635
30-1645
30-1655
page
226
Mfr. #
3020
3018
3016
Boom Length
152"
113"
66"
ONLY
$99.99
64.99
45.99
Channel Master ushers
in a new era for off-air
reception with the
introduction of the STEALTHtenna. Optimized for
HDTV/digital and analog reception, the STEALTHtenna
offers the performance and aesthetics that today’s
consumers demand for their ever changing reception
needs. The STEALTHtenna is also the perfect compliment
to DBS satellite systems for reception of local broadcast.
Rear mounting bracket design allows the STEALTHtenna
to be easily installed under an eave for an inconspicuous
installation. STEALTHtenna may also be mounted in
traditional roof, chimney, wall and attic configurations.
Optional amplifier provides split band amplification and
is optimized for HDTV/digital as well as analog signals.
Specifications: Gain: 15dB UHF, 15dB VHF/FM.
Power 12~22VDC via included adapter.
Order #
30-1715
30-1720
Mfr. #
3010
3038
Description
Stealthtenna
Stealthtenna amplifier
1-800-543-4330
Fax: 1-800-765-6960
UHF/VHF/FM Antennas
•300ohm output, includes 75ohm transformer
Order # Description
Boom Length Elements ONLY
30-840 Colorstar 480
150"
48
$77.99
30-850 Color King 5884
58"
25
29.99
ONLY
$29.99
29.99
NET 30
Terms
Customer Service: 1-877-626-3532
SATV/CATV
Outdoor Antennas
NEW!
NEW!
Section
13
#30-2102
ClearStream™ DTV Antennas
TM
•Consistently powerful reception gain across the
entire DTV spectrum •Advancements in efficiency
allows up to 98% of the available broadcast signal to
actually reach the incoming antenna cable rather than
being lost to impedance mismatches •Compact and
easy to mount •Easy to assemble •Unmatched power
and efficiency through advanced computer design
•Engineered for extra strength and durability •UHF
and DTV spectrum (470~806MHz) •Multidirectional,
up to 70° of beam width
UHF/HDTV
Outdoor Antenna
•Directional outdoor antenna is optimized to pick up UHF
signals for digital television and high-definition television
broadcasts •Frequency range: 460~862MHz •30 elements
•75ohm “F” type connection •20dB •Up to 50 mile range
Order #
30-2155
MSRP
$39.95
Order #
Model #
30-2102
30-2104
30-2106
ONLY
$19.99
C1
C2
C4
#30-2104
#30-2106
Range
Miles
Dimensions
(H) x (W) x (D)
Gain
Weight
ONLY
0~30 0~50 0~65 10" x 10" x 4.5"
20" x 10" x 5"
19" x 20" x 4.5"
8 dBi
10.2 dBi
14.8 dBi
2.5 lb.
3.5 lb.
8.5 lb.
$59.99
84.99
129.00
NEW!
ClearStream
Pre-Amplifier Kit
#30-2070
#30-2071
#30-2072
These powerful, weather-resistant, outdoor antennas are ideal for medium to long range applications that require
the gain of the antenna to be concentrated in one direction. The Yagi style design effectively rejects off axis
signals from structures that cause multi-path interference, and the corner reflectors on the back of the antennas
improve the forward gain of the antenna resulting in exceptional performance across the entire UHF spectrum
(channels 14~69).
Order #
Description
30-2070
Compact, 15-element, short-range
30-2071
Mid-sized, 43-element, long-range
30-2072
Large, high-gain, 91-element, long range
Multi-Directional
HDTV UHF Antennas
Range
miles
1~30
15~60
50~70+
Gain
db
11.0
15.7
16.7
Dimensions
(H) x (W) x (L)
14" x 13" x 35"
19" x 18" x 62"
22" x 20" x 93"
ONLY
$47.99
54.99
84.99
#30-2065
#30-2066
Indoor/outdoor, low-profile, short range
Outdoor, most popular, mid-range
Outdoor, high-gain, long range
1~30
15~55
50~70
#30-2110
Product Questions Email: tech@MCMelectronics.com
#30-2112
•Pivoting foot mount offers
the ideal solution for mounting
nearly anywhere, including
side of house, roof top, deck
rail, or any other flat surface
•Pipe is reversible from plate
for more mounting angle
options •20” mount is ideal for
the ClearStream antenna series
Includes:•J-shaped mounting
pole •Mounting bracket
•Expansion bolts
Size
30"
20"
ONLY
$16.99
15.99
#30-2067
11.4db
13.7db
15.8db
12" (H) x 19" (W) x 4" (D)
29" (H) x 19" (W) x 4" (D)
29" (H) x 42" (W) x 4" (D)
$35.99
49.99
79.99
Variable Attenuator
For those living very close
to transmitting towers,
problems with multipath
interference can occur because the signals are so strong
that they bounce off nearby buildings and other objects
and cause multiple images to appear on one’s TV screen.
This attenuator allows users to dial down the signal to
reduce problems associated with this multipath and
overloading interference.
Order #
30-2118
Follow us on:
ONLY
$99.99
Universal J-Mount
Order #
30-2110
30-2112
Multi-directional antennas
are designed to work in locations where the transmitters for digital stations are spread apart. These popular HD
antennas utilize a bowtie design that provides a strong gain across the entire UHF spectrum (channels 14~69).
They function incredibly well in areas where flexible aiming is required and feature a weatherproof construction
that resists extreme wind loading.
Order # Description
Range Miles
Gain
Dimensions
ONLY
30-2065
30-2066
30-2067
Order #
30-2120
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$11.99
page
227
13
Uni-Directional HDTV UHF Antennas
•Commercial grade
low noise antenna
pre-amplifier designed
and optimized for
digital TV reception •Max gain: 18.4dB VHF, 17.3dB
UHF •Frequency range: Amplifies 174MHz~216MHz
and 470MHz~700MHz •Ultra low noise figure: 1.7dB
VHF, 2.0 dB UHF •High overload resistance •75ohm/“F”
connector output and input Kit includes: •Mast
mount amp •Power inserter •Two 3' coaxial cables
Section
13
SATV/CATV
Radio Antennas
AM/FM Tower
Positioned vertically, the tower receives
signals from all directions with equal
strength. Used horizontally, it becomes
highly directional to pull in weaker and
more distant stations. It also distinguishes
between signal reflections and the main
signal to eliminate overload and multipath
difficulties. Specifications: FM stereo
section: •Amplifier gain: Variable
0dB~25dB •Impedance: 75ohm adaptable
to 300ohm input with included matching
transformer •FM operating band:
88~108MHz AM stereo section: •AM
operating band: 500~1700KHz •AM gain:
15dB •Range: 360° 17" (H) x 31⁄4" (W)
Order #
30-1110
(1-9)
$19.99
FM PRO 50
FM PRO is the clear choice for the FM enthusiast.
Designed to provide exceptional long-range FM
reception, it may be mounted indoors or outdoors for a
totally unobstructed installation. #30-1205 has a weatherproof housing and is easily installed in an attic, exterior
side of the home or indoors in a closet, garage or interior
wall. New Advanced Capture Circuitry™ (ACC) ensures
that strong signals are locked in and weaker broadcasts
are received with less noise. Terk’s exclusive Dual Drive
Amplifier boosts signals above noise and interference,
using a DC–driven phantom power supply that is easily
connected to your receiver.
Order #
30-1205
AM/FM HD Radio Antenna Kit
•Professional quality AM/FM/HD radio
antenna •Receive stations from up to
90 miles in all directions •All signals
combined on a single RG-6 cable up to 200'
(not included) •Includes surge protector and
all required adapters and jumpers •Pole or
wall mount •No preamplifiers required
•4' omni-directional monopole requires
no ground plane •Mfr. #AFHD-4
Order #
33-10630
ONLY
$159.00
ONLY
$101.71
(10-up)
$18.95
AM/FM Q
AM Advantage
The AM Advantage
antenna is a passive, fully
adjustable indoor AM
antenna designed for
extended range capability.
The antenna is intended
to receive AM frequencies
530KHz~1600KHz for
local and distant AM
reception. The antenna features Pin–Dot™ Pre Tuning
system which allow the user to adjust the antenna and
match it to the specific frequency. Mfr. #ADVANTAGE.
ONLY
$37.99
13
Order #
30-1395
AM Loop Antenna
•Popular replacement
AM antenna used on
most stereo receivers
•181⁄2" lead length
•300ohm impedance •Antenna has two pin quick connect
for equipped systems •For systems with push terminals
or screw terminals, simply cut and strip the ends of the
antenna wire for your application
Order #
30-660
(1-9)
$2.99
(10-up)
$2.84
TERK’s premium
amplified indoor AM/FM
antenna. The AM/FM Q
features TERK’s unique
Pin-Dot Pre-Tuning that
zeroes in on even hard-to-get stations by tuning the
antenna to the station’s frequency. Mfr. #AF-1.
Order #
30-1550
(ea.)
$67.99
(2-4)
$65.65
FM Turnstyle
•Offers the gain of a folded
dipole with an omni–directional
pattern •Works in areas
where stations are situated
in many directions
(5-up)
$62.47
Order #
30-855
ONLY
$21.99
FM Dipole Antennas
These high-quality FM
dipole antennas can be
used for many newer FM
tuners and receivers.
Available in three
configurations: 300ohm
spade terminals, 75ohm male “F” connector and 75ohm
female PAL connector. These antennas are constructed
from high quality 300ohm twin–lead and perform
significantly better than the OEM supplied straight wire
or a split two conductor antennas providing higher-quality
FM reception.
Order #
30-1530
30-1535
30-110
Description
Male “F” connector
Female PAL connector
Spade terminals
(1-9)
$2.29
1.99
2.29
(10-up)
$1.59
1.49
1.99
Scanner Antenna
Covers VHF/UHF public service bands
30~1300MHz. Includes 300 to 75ohm
matching transformer and 50' RG-6
coax cable.
Order #
30-1380
ONLY
$42.99
HDTV Network Tuners
NEW!
NEW!
#831-7360
HD HomeRun Commercial ATSC Network Dual HDTV Tuner
Designed for a school or business, this networkable dual ATSC tuner features multicast
streaming and digital broadcast diagnostics and troubleshooting. Features: •Head-end
monitoring •Customizable commercial applications •Dual tuners •ATSC •Digital cable
(QAM256/64 Annex B) •47MHz~862MHz tuning range •6MHz channel bandwidth
•Up to +40dBmV operation •100baseTX Ethernet •Multicast streaming •TS reader
stream analysis (optional) •Estimated dBmV signal level display •dB signal quality
display •Constellation plot display •Configurable TTL •Static channel/target/IP
configuration •Scriptable from Windows, OSX, Linux, BSD and Solaris
Order #
831-7362
page
228
ONLY
$289.00
#831-7361
HD HomeRun ATSC Network Single and Dual HDTV Tuner
•Simply attach the HD HomeRun to a router and HDTV broadcasts become available
to all PCs on your network •Record full 1080i broadcast resolution •Pause, rewind,
fast-forward live TV •Schedule and record all your favorite TV shows •Expand with
multiple HDHomeRun devices •Includes DVR software •Compatible with Windows®
Media Center, SageTV®, VLC, XBMC, and many other media center software packages
Order #
831-7360
831-7361
1-800-543-4330
Fax: 1-800-765-6960
Description
Single tuner
Dual Tuner
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$129.00
189.00
SATV/CATV
Indoor Antennas
HDTV Indoor
Amplified
Antenna
HDTV Indoor Antennas
Terk indoor HDTV directional antennas are
optimized for HDTV reception. Both UHF
and VHF elements are uniquely designed
for reception of all available HDTV off-air
broadcasts (channel 2~69). Highly
directional UHF elements reduce signal
interference and improve average return
loss for better reception and superior performance.
Order #
30-2000
30-2005
Mfr. #
HDTVi
HDTVa
Description
Non-amplified
Amplified
NEW!
ONLY
$39.99
49.99
Ideally suited for
indoor HDTV (UHF)
off-air reception, this
antenna features a
low-profile boom
design, rotational
elements for improved directional gain, and a 7~13dB
adjustable gain control (power adapter included).
DTV/ATSC Tuner Box
Order #
30-2100
Order #
30-2202
ONLY
$19.99
TM
NEW!
Order #
30-2175
Order #
30-2160
Indoor Flat HD Antenna
ONLY
$34.99
MSRP
$24.95
ONLY
$14.99
• Receives local digital TV broadcasts and FM
radio signals •360° reception patented technology
eliminates constant adjustment •Enhances reception by
amplifying weak signals with a built-in ultra low noise
amplifier •Can be hung on a wall or lie flat •Coax cable
included •Mfr. #ANT1450B
ONLY
$29.99
Order #
30-2190
UHF/VHF TV Antenna
•Receives HD and DTV signals •Super slim design can be
laid flat or hung horizontally on wall, even behind your
television •Includes coax cable •Mfr. #ANT1000
Order #
30-2165
Order #
30-655
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$159.00
•Excellent indoor HDTV/UHF
reception •Passive antenna design
allows for increased forward
gain while minimizing
interference from side and
rear •Place on set-top or
mount on the wall •Includes
110" of coax cable •Dimensions: 10" (L)
x 11.5" (W) x 8" (H) •Mfr. #CM-4040
ONLY
$24.99
NEW!
ONLY
$9.99
•Dipoles extend to 30"
•Dual UHF loops •Brass with
polished chrome finish •Black
base with 33" lead length
ONLY
$9.99
Ideal solution for receiving terrestrial,
off-air (antenna) digital TV broadcasts from
the constantly increasing number of off-air
digital TV broadcasters (e.g., local stations,
PBS, etc). Features: •ATSC receiver capable
of outputting composite, or component
(Y.Pb.Pr) video •Stereo audio output •Parental
control-movie/TV rating (V-chip) •Fully functional
infrared remote controller •Selectable SDTV/ HDTV
output/input resolution (480i/480p/720p/1080i) •Standard
definition NTSC 480i output •Aspect ratio control; 4:3
and 16:9 •Advanced Electronic Program Guide (EPG)
Order #
30-2150
UHF/VHF Antenna
•High-quality 44" chrome elements
•Includes both VHF and UHF capability
for reception of channels 2~69, including
HD and digital channels •54~806MHz
•Mfr. #TV1
NEW!
Digital TV/HDTV
ATSC Off-Air Tuner
INDOORtenna™
HDTV/UHF Antenna
ONLY
$9.99
Order #
30-2195
Back
(1-9)
$5.07
(10-up)
$4.17
Slim Indoor Antenna
•Slim antenna sets on or near your TV
with a stable flip-out stand •Efficient,
directional design with ultra-low noise amplifier
maximizes digital reception •20dB gain •Noise (max):
<4 dB Includes: •Antenna •6' coax cable
•9VDC power adapter
Order #
30-2210
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$19.99
page
229
13
•Simple classic design with
adjustable 36'' dipoles and loop
•Built-in 5' coaxial cable •Receives
UHF, VHF, HDTV/DTV, and FM
signals •Mfr. #ANT111
Flat Black HD Antenna
Basic Slim Antenna
ONLY
$49.99
Order #
33-10413
Basic UHF/VHF Antenna
NEW!
Order #
30-2170
•Receives free Over-the-Air (OTA) digital television
signals •Down-converts OTA HDTV signals for use
with standard and enhanced definition TVs (480i/480p)
•Compatible with all 18 ATSC signal formats •On-screen
Electronic Program Guide support •A/V Output: coaxial
(RF), S-video, composite video, RCA stereo audio
•Includes remote
UHF/VHF/HDTV
Indoor Antenna
•Paintable flat antennas are designed to
disappear into any décor •Can be hung, lay flat, or stood
vertically •Advanced 360° reception eliminates need to
adjust antenna while changing channels •Designed for
HD reception and receives UHF/VHF/FM signals
•Includes coax cable
Description
Passive
13
NEW!
•An amplified UHF/VHF
antenna that will receive
all FM, DTV, and HDTV
signals •Adjustable
amplifier for better control
on reception gain •“F” type
input for connecting
external antenna, VCR,
cable, or other source, or used stand-alone •Great for areas
where an outdoor antenna is required for some stations,
but nearby stations that are too strong require an indoor
antenna •Frequency range: 40~860MHz •Max noise: 6dB
•Max amplification: 28dB •Power source: 120VAC or
optional 12VDC
Mfr.#
ANT1500
Section
Section
13
SATV/CATV
Satellite Radio
Sirius Ready
NEW!
A
XM Ready
Professional High Gain
Satellite Radio System
for XM and Sirius
•Receives XM or Sirius satellite radio services
•Ideal for commercial, high-end home and multi-dwelling
unit installations •Optimized for interference/multipath
rejection and high gain reception of satellite radio
signals •Antenna can drive up to 200' of RG-6 cable
(not included) •Mounts to any horizontal or vertical
surface or to a 13⁄4" diameter pole •High gain 12dBi
antenna (5dB more than standard antennas) Includes:
•Built-in two-stage ultra high low noise amplifier •Wall
and pole brackets and accessories •3' “F” female to SMB
plug adapter cable to mate with radio •Mfr. #PRO-500
Order #
33-10620
ONLY
$129.95
Cable TV and
Satellite Radio Multiplexer
NEW!
XM/Sirius Radio Ready Pro Pack
•Everything needed to add Sirius to any “XM Ready”
or “Sirius Ready” receiver using up to 200' RG-6 cable
Kit includes: •Pro-500 outdoor antenna •“F” to SMB 3'
adapter cable •Sirius SC-H1 tuner or XM CMP2000
tuner and dock
Order #
33-10670
33-10715
Mfr. #
SRR-1
XMR-1
For Receivers
“Sirius Ready”
“XM Ready”
NEW!
•High-quality future proof home antenna for simultaneous
reception of both XM and Sirius Radio •70 beam-width
for easy alignment and mounting Drives up to 200' of
RG-6 cable (not included) •Azimuth and elevation
adjustments for optimum aiming •Two-stage high-quality
filtering for rejection of out-of-band interference
•High- quality aluminum mount •Includes wall or pole
mount brackets •Mounts to any horizontal or vertical
surface or pole up to 2'' diameter.
Order #
33-10645
•Utilize existing cable TV wiring to distribute satellite
radio antenna signal •Designed to work with PRO-500
(#33-10620) and PRO-600 (#33-10645) antennas •No
external power supply required •All jumpers and adapters
included •Sold as two separate input and output pieces
Fig. Order #
Mfr. # Description
A 33-10705 SRC-DI Cable/XM diplexer in
B 33-10710 SRC-DO Cable/XM diplexer out
ONLY
$44.99
44.99
ONLY
$219.00
199.00
Power Inserter Kit for
XM Satellite Radio
Dual Mode Satellite Radio Antenna
13
B
•Designed to power line
amplifiers and XM
Satellite Radio amplified
antennas •This unit
consists of a 5VDC
regulated power supply
for use in RG-6 networks designed to distribute XM
satellite radio signals •Mfr. #PS-1
Order #
33-10625
ONLY
$79.99
Satellite Radio
RG-6 Cable Extender Kit
•Kit to permit the use of standard RG-6 cable with satellite
radio antennas •When used with the included amplifier,
this kit can extend the antenna cable up to an additional
125' •Add the flexibility of RG-6 cable Kit includes:
•SMB to “F” adapter (to mate with antenna cable)
•High-gain amplifier •“F” to SMB adapter cable
(to mate with radio) •Mfr. #EXTANT-01
Order #
33-10600
ONLY
$47.99
ONLY
$99.99
Amplifier Satellite Radio Splitter Kit
#33-10605
Satellite Radio Multiplexer
SMA/SMB
to “F” Adapters
#33-10650
#33-10655
•Adapters used to convert XM or Sirius SMA
and SMB connections into an “F” connection
to mate with RG-6 cables
Order #
33-10605
33-10610
33-10650
33-10655
33-10660
Description
Qty.
3' SMB-plug to 1
“F” female adapter cable
3' SMB-plug to 10
“F” female adapter cable
SMA male to “F” female adapter 1
SMB male jack to “F” male adapter 1
SMB male jack to “F” male adapter 10
ONLY
$17.99
•The components you need to multiplex the output of a
satellite radio antenna onto the RG-6 from a DBS system
•Supports cable runs up to 200' •Designed for the PRO500 (#33-10620) and PRO-600 (#33-10645) antennas
•Mfr. #SRDBS
Order #
33-10700
ONLY
$64.99
22.99
15.99
149.00
Mfr. #
SR-4
SR-8
Description
Four-way kit
Eight-way kit
ONLY
$99.99
259.00
Satellite
Radio RG-6
Extension Kit
•For use in satellite radio distribution networks to
overcome loss in cables and splitters •Gain: 16dB @
4.5VDC •Current consumption: Typically 10mA @
4.5VDC •Frequency range: 2320~2345MHz
•Noise figure: 4dB max •Mfr. #SBA-1
This antenna
extension cable is
designed to work with any satellite
radio antenna (purchsed separately) to extend the cable
length 100' (lengths up to 300' can be achieved by
cascading three cable kits). Kit includes: •SMB to “F”
adapter •High-gain amplifier •100' premium RG-6 cable
with “F” connectors •3' female to SMB-plug adapter cable
•Two coax seals •Mfr. #PRO-100
Order #
33-10640
Order #
33-10615
230
Order #
33-10675
33-10680
169.99
High Gain
Line Amplifier
page
•Operates up to four or eight satellite radios from a single
antenna with this amplified splitter •Includes all adapters
and accessories •Uses standard RG-6 cable (not included)
•Maintains proper RF link budget for the radio •Splitter
loss at 2.35GHz has been compensated by an internal
low-noise amplifier powered by DC voltage supplied by
radios •Splitter has 8dB of gain •Adapters used to convert
XM or Sirius SMA and SMB connections into an “F”
connection to mate with RG-6 cables
ONLY
$19.99
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$69.99
#33-10690
#33-10695
Wide Band
Four-Way Passive Splitter
•Designed for all AM/FM, HD radio, broadcast TV,
cable TV, satellite radio, and satellite TV signals •Passes
signals from 500KHz to 2.4GHz •Insertion loss: 12dB
•Use in conjunction with #33-10695 for lossless splits
Order #
Mfr. #
Description
ONLY
33-10690 MBS-4 4-way splitter
$79.99
33-10695 MBA-12 Line amplifier for #33-10690 84.99
NET 30
Terms
Customer Service: 1-877-626-3532
SATV/CATV
RF Modulators
Section
13
TM
Back
SLV A/V RF Modulator
RF Modulator and Video Switcher
4Four input selector
4Accepts S-video or composite video/line level audio sources
4Selectable output on CH3 or CH4
•Lets you connect components with S-video or composite
output (DVD, satellite) to a TV without A/V jacks,
by modulating the signal to RF •Ideal for hooking up
several components to a TV •Combines RF modulator
and S-video switcher into one unit •Converts any input
(S-video, composite, A/V, stereo) to RF output •A/V and
S-video switching •Composite to S-video convertor
•Front input, stereo input •Gold plated connectors
Order #
CRF940
Back
4Accepts composite video/line level audio source
4Selectable output on CH3 or CH4
4Auto switching between antenna and A/V source
The mini RF modulator is a compact, inexpensive
modulator that will convert any composite video source
to VHF for viewing on your TV on either channel 3 or 4.
Its low signal loss enables it to deliver excellent picture
and sound quality. Inputs: Three RCA (composite video
and stereo audio), one “F”.
Order #
33-9775
MSRP
$19.99
(1-9)
$12.99
(10-49)
$12.69
ONLY
$25.95
Back
TM
Composite/S-Video to HDMI Scaler
•Use your composite and S-video equipment with HDMI
televisions, switches, receivers and more •Basic upscaling
to 720P at 60MHz •Syncs audio and video channels
•Works with any HDMI to DVI adapter •Dimensions:
6.1" x 2.75" x 0.90" •Includes 5V, 2A power supply
Order #
33-10720
MSRP
$179.00
ONLY
$59.99
MINI RF Modulator
Digital UHF Modulator
Back
4Accepts composite video/line level audio source
4Selectable output on UHF 14~69 and CATV 65~139
4LED output channel display
Order #
33-2740
(1-9)
$48.99
(10-up)
$45.95
ONLY
$18.99
Remote
Control
A/B Switch
•You’ll never have to
leave the comfort of
your chair with this infrared remote
control video switch •Allows you to switch between
two 75ohm inputs •75ohm output (TV) •AC adapter:
120VAC/12VDC, 100mA included •5MHz~900MHz
bandwidth •89dB isolation •UL listed •Remote requires
two “AA” batteries not included
Description
Switch
Replacement remote
Product Questions Email: tech@MCMelectronics.com
(10-up)
$13.89
13.89
(ea.)
$29.99
8.39
(2-up)
$25.95
-
•Two input, 75ohm, high
isolation •A/B switch for
CATV, MATV, MDS, SATV
and VCR applications
•Features zinc die–cast
housing •Molded PVC outer
case with mounting flanges •5~900MHz bandwidth
•90dB isolation “off” •Patented design
Order #
33-390
(1-9)
$8.99
(10-up)
$8.17
RF Switch
Order #
33-380
Order #
33-2895
Order #
33-1490
33-1485
Follow us on:
(1-9)
$14.99
14.99
•Two input, slide type A/B
switch •60dB isolation
typical •5~900MHz
bandwidth •Output 75ohm
The 5515, 5525-01 and 5545-01 are one, two and four
channel input modulators with loop–out capabilities and
integrated IR control. Each offers IR emitter output jacks
and the ability to remotely power a DA-550 series or an
DA-8200 series distribution panel from up to 75' away.
The 5500 series works with both the 12V and 5V IR
systems and accessories. The 5515, 5525-01 and 5545-01
offer 75ohm termination jumpers on all channels to
loop–through the video and audio signals. Features
include: 1, 2 and 4 channels, push button programming,
UHF 14~64 and CATV 65~125, 25dBmV output.
ONLY
$89.99
139.00
199.00
Combiner
3
4
The AB–4 is a push-button
type coaxial selector
switch, suitable for
back–of–set or similar
flat surface mounting.
This unit offers high
isolation, great return
loss characteristics,
and minimum loss over the
entire CATV spectrum, including both the VHF and UHF
bands. The AB–4 features an internal secondary shield
and a molded plastic outer cover, providing excellent RF
shielding. This durable push–button type switch ensures
reliable and contact closure. The AB–4 is supplied with
male “F” connectors and necessary mounting hardware.
Electrical specifications: •Frequency range: 5~900MHz
•Insertion loss: 0.2dB (5~250MHz), 0.5dB
(250~900MHz) •Isolation: 85dB (5~250MHz), 65dB
(250~900MHz) •Connectors: “F” type, female
High Isolation Switches
Outputs
1
2
4
Order #
33-255
33-1080
Deluxe A/B Switch
4Models available with 1, 2 or 4 inputs
4Places each input source on an independent channel
4Selectable output on UHF 14~69 and CATV 65~125
4Allows source selection by simply changing channels
Order #
5515
5525-01
5545-01
•Combines channel 3/4 signal
(from VCR, computer, game, etc.)
with existing VHF signals not
including channel 3/4 •Also removes
bleedover of channel 3/4 modulated
signal from adjacent channels 2 and 4
RF Switches
Order #
32-4425
32-4426
Back
Digital RF Modulators
Order #
33-9645
Channel Combiners
13
The USM-8D is a low cost, frequency stable, UHF
modulator developed for use in adding satellite, VCR, or
security video channels to an existing home distribution
system. The frequency adjustable feature allows multiple
channel use at an extremely low cost. Specifications:
•Frequency range: UHF channels 14~69 and CATV
channels 65~139 •Video input: Composite •Output
impedance: 75ohm •Output level: 7dBmV •Power input:
115VAC, 60Hz, 5W •Connectors: “F” for RF, RCA video
and audio •Mfr. #USM-8D
The Terk MINI modulator
is a compact modulator that will convert
any video source to either channel 3 or
4. Its low signal loss enables it to deliver
excellent picture and sound quality. The
MINI was designed to be in-line, so that
it can hang or be mounted on a vertical
surface and out-of-sight. It features automatic signal
detection and automatically switches between A/V
sources when a signal is detected. Mfr. #MINI.
•Three–way coaxial A/B/C
switch •Use for antenna, CATV
or VCR •Greater than 65dB
isolation through 550MHz
and 50dB through 900MHz
Description
A/B/C
A/B
Coaxial Cable Switch
(1-9)
$4.49
(10-up)
$4.19
(1-9)
$9.99
5.99
(10-up)
$9.49
5.25
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1-9)
$4.99
(10-up)
$4.74
page
231
Section
13
SATV/CATV
RF Splitters
Four-Way
Couplers
•For indoor and outdoor use
•RF shielding exceeds FCC
specifications •Maintains
75ohm impedance on trunk •Full
5MHz~900MHz operational range
•Use 75ohm terminator on last trunk
output (MCM #33-550)
Order #
33-1425
33-1430
33-1435
RF Splitters
•75ohm splitters for use with cable, antenna, satellite,
broadband, and other RF distributions •High frequencies
available for use with digital satellite and broadband
systems •All ports power passing
Frequency
Order # Outputs Range
33-10955 2 5~1000MHz
33-10956 3 5~1000MHz
33-10957 4 5~1000MHz
33-10960 2 5~2300MHz
33-10961 3 5~2300MHz
33-10962 4 5~2300MHz
(1-9) (10-24)(25-49)(50-up)
$0.79 $0.75 $0.69 $0.62
0.89 0.85 0.78 0.70
0.99 0.94 0.87 0.78
1.49 1.42 1.30 1.17
1.99 1.89 1.74 1.57
2.49 2.39 2.29 2.23
Description
16dB
20dB
24dB
(1-9)
$6.25
6.25
6.25
(10-49)
$5.92
5.92
5.92
(50-up)
$5.40
5.40
5.40
C
Power
Passive
Splitters
A
Power passive
splitters allow
for use of
B
in-line amplifiers
and other DC
powered devices. For applications to 1000MHz.
Fig
A
B
C
Order #
33-4400
33-4405
33-4410
Description
2-way
3-way
4-way
(1-9)
$2.69
3.29
3.79
(10-up)
$2.29
2.79
3.39
Mini Hi-Frequency Splitter
Mini hi-frequency splitter saves space in
confined areas. DC passive one port.
Attached plastic cable channel
provides neat installations.
Bandwidth: 5~2250MHz. Measures:
2" x 2" x 1" (port to port).
Order #
33-4860
(1-9)
$5.04
(10-up)
$4.67
CATV FM Tapoff
•Zinc die-cast mounting •Provides
connection to stereo tuner for MTV
and other FM broadcasts usually
available on cable TV lines
Order #
33-350
(1-9)
$1.99
(10-99)
$1.91
(100-up)
$1.83
RF Filters and Attenuators
13
Cable Modem Isolator
Separates and isolates
noise/EMI caused by
higher cable modem
transmission signals.
Improves internet download
reliability and reduces cable
modem “sync” problems. Easily plugs
into coax wall jack allowing dedicated runs to a cable
modem and TV tuner. •Frequency range: 10~770MHz
•Insertion loss: <5.0db.
Order #
33-10395
Ground Isolation
Transformer
5MHz~2.4GHz
bandwidth for use
in antenna, cable
television and satellite systems. Reduces the effects of
ground loops such as herringbone, beat and audio hum.
Order #
33-8700
(1-9)
$19.99
ONLY
$2.99
•Blocks DC and low frequency
AC power •Solid brass body with
nickel plating •Female to male
fittings •22 gauge spring steel
center pin •1~1000MHz
bandwidth •16dB return loss •0.3dB insertion loss
Order #
33-0020
(1-9)
$2.69
(10-up)
$2.39
Low Pass Filters
A low pass filter is used on systems when the broadband
feed is supplied by a CATV service. The filter removes all
CATV channels above the pass band, allowing insertion of
locally generated channels.
Order #
LPF-380
LPF-470
LPF-600
LPF-750
Pass Band (MHz)
40~380MHz
40~470MHz
40~600MHz
40~750MHz
ONLY
$21.99
22.99
34.99
34.99
FM Trap
Audio from the FM band can
overcome the audio on adjacent
television channels 6 and 7 and
harmonics of the FM carrier.
The FM trap eliminates the entire FM band from 88 to
108MHz reducing video noise and audio interference.
Order #
33-341
page
232
(1-9)
$2.69
(10-49)
$2.69
(50-up)
$2.39
Features: Nickel-plated, solid
brass body, monolithic ceramic
printed circuit board, ensuring rugged construction, etched
glaze-type resistors provide ±5% accuracy and excellent
return loss, small 1.375" size, 22-gauge spring steel
center pin, female to male fitting, not DC passive.
Specifications: •Bandwidth: 100KHz~1750MHz
•Return loss: 20dB typical •Accuracy: ±5%
Order #
33-2750
33-2755
33-2760
33-2765
33-2770
33-2775
33-2780
Description
3dB
6dB
8dB
10dB
12dB
16dB
20dB
(1-9)
$1.30
1.30
1.30
1.30
1.69
1.30
1.30
(10-up)
$1.25
1.03
1.03
1.25
1.34
1.03
1.03
Fixed Mini-Types
•Nickel plated solid brass
body •Monolithic ceramic
printed circuit board,
ensuring rugged
construction •Bandwidth:
5KHz~950MHz •Not DC passive •5% accuracy •22 gauge
steel center pin •Small: 13⁄8" size •“F” type female to male
•75ohm •Three attenuators to choose from •Sorry–no
mixing of values for quantity pricing.
Order #
33-790
33-795
33-810
dB
3
6
12
(1-9)
$3.09
3.49
3.49
1-800-543-4330
Fax: 1-800-765-6960
(10-49)
$2.68
3.29
3.19
B
Solder Back Indoor/Outdoor
Directional Couplers and Taps
Fixed Mini-Type
Attenuator Pads
Voltage Blocking Coupler
A
(10-up)
$16.95
Blonder Tongue offers a complete line of professional
quality indoor/outdoor couplers and tapoffs covering
frequencies up to1000MHz. These products are available
in both an L or T style cases. The variety of loss values
offered guarantees that they have the right product for
your application. These products feature a durable
outdoor rated soldered back, cast housing, which shields
against EMI and RFI disturbances.
Order #
Loss (dB)
A. L Style-SCW models
33-2941
4
33-2946
6
33-2951
9
33-2956
12
33-2961
16
33-2966
20
33-2967
24
33-2968
27
33-2969
30
B. In-Line Style-SRT models
33-2971
4
33-2976
6
33-2981
9
33-2986
12
33-2991
16
33-2996
20
33-2997
24
33-2998
27
33-2999
30
(50-up)
$1.77
2.79
2.89
NET 30
Terms
Customer Service: 1-877-626-3532
(1-9)
(10-up)
$2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
$2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
SATV/CATV
RF Splitters
D
E
A
B
C
D
Section
13
C
Vertical Splitters
•Nickel plated zinc die-cast housing •RFI shielding
•2GHz splitters feature one power passive port marked
on the splitter
Order #
5~1000MHz
33-4880
33-4885
33-4890
33-4895
33-4900
5~2150MHz
33-7140
33-7150
33-7155
33-7160
A
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$3.02
4.03
5.04
6.05
7.06
$2.59
3.63
4.15
5.19
6.23
2–way
4–way
6–way
8–way
5.99
9.99
15.99
17.99
5.65
8.99
13.34
15.40
B
C
D
E
B
A
Indoor Splitters
High Frequency Horizontal Satellite Splitters
High frequency splitters used for satellite and DSS
applications. Power passive to operate in–line amps
and multi-switches. Bandwidth: 5MHz~3000MHz.
Fig Order #
1 Port Passive
A
33-4350
B
33-4355
C
33-4360
D
33-4365
E
33-4370
All Ports Passive
A
33-4375
B
33-4380
C
33-4385
D
33-4390
E
33-4395
Description
(1-9)
(10-up)
2-Way
3-Way
4-Way
6-Way
8-Way
$5.99
8.07
8.99
16.49
17.49
$5.75
7.27
8.23
15.55
16.59
2-Way
3-Way
4-Way
6-Way
8-Way
5.99
8.07
9.21
16.49
17.49
5.75
7.27
8.44
15.78
16.59
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$5.99
7.99
8.99 15.99
16.99
$5.69
7.59
8.54
15.15
16.10
3-way
4-way
6-way
8-way
7.99
8.99
15.99
18.99
7.59
8.54
15.15
18.23
B
C
High Frequency RFI Splitters
Order #
33-10245
33-10246
33-10247
Description
2-way
3-way
4-way
A
(ea.)
$2.79
3.19
3.79
(2-up)
$2.29
2.79
3.19
B
In-Line Splitters
Order #
33-4865
33-4870
33-4875
RFI Splitters
(1-9)
$3.02
4.03
5.04
(10-up)
$2.59
3.63
4.67
Follow us on:
Product Questions Email: tech@MCMelectronics.com
Fig.
A
B
C
Order #
33-2130
33-2135
33-2140
(10-up)
$0.94
1.61
3.19
6.29
DC & IR
Passing Yes Yes No ONLY
$5.09
7.49
10.49
A
B
High-Frequency Splitters
•Heavy-duty, die-cast design •Power passive
•Low thru-loss •950MHz~1750MHz
•For use with satellite systems and other
high-frequency applications
Order #
33-0035
33-0040
Description
2-way
4-way
(1-9)
$3.99
5.99
(10-up)
$3.83
5.75
C
•For use in applications where
additional shielding is needed
•100dB case design exceeds
FCC requirements for RF
shielding •25% more zinc
content than standard splitters
•Case thickness increased by 50% to obtain very good
RFI performance •Mounting tabs with screws and
grounding block •5MHz~1000MHz frequency response
Description
2-way
3-way
4-way
(1-9)
$0.99
1.69
3.19
6.39
The Channel Plus
bi–directional
splitter/combiners
provide a 1GHz
bandwidth and are ideal for
antenna and coaxial cable operations.
It can be used to split a signal from a source or combine
signals from multiple sources onto one coax run.
Fig
A
B
The in-line port
design of these
splitters helps to keep
cables organized and
makes them perfect
for installations in
crowded areas. Nickel
plated zinc die-cast
construction.
Bandwidth:
5~1000MHz.
Description
2-way
3-way
4-way
8-way
Splitter/Combiner
DIRECTV® compatible high frequency performance to
3GHz. •Tin-plated zinc die-cast housing with soldered
back to achieve RFI -130dB •Waterproof and airtight up
to 30 P.S.I. with 4.55mm grounding hole and stainless
steel screws •Low thru loss and high isolation with patent
pending 360° insert pin. Bandwidth: 5MHz~3000MHz.
Fig.
A
B
C
Order #
33-2900
33-2905
33-2910
33-2915
Type
2-way
3-way
4-way
(1-9)
$2.11
2.99
3.42
(10-up)
$1.86
2.48
3.01
2.4GHz Four Way
Bi-Directional Splitter
•High-grade circuitry allows the
connection of components with
minimal signal loss •Maximum transfer of all your RF
signals including higher digital frequencies means quality
reception and excellent picture output •Splits a 75Ω
coaxial signal from cable TV, an antenna or a VCR for
connection to two TVs/VCRs •Frequency: 5MHz~2.4GHz
•Gold-plated input/outputs for reliable connectivity
•Dual-grounded connections •Precision cast body
Order #
DT44SP
MCMelectronics.com
Email: quotes@MCMelectronics.com
ONLY
$11.99
page
233
13
Fig. Order #
1 Port Passive
A
33-10235
B
33-10236
C
33-10237
D
33-10238
E
33-10239
All Ports Passive
B
33-10241
C
33-10242
D
33-10243
E
33-10244
A
Fig
A
B
C
D
Insertion Order # Description Loss 2512 2–way 3.5 dB 2514 4–way 8.0 dB 2538 8-way 12.0 dB High Frequency Vertical Satellite Splitters
High frequency vertically oriented splitters used for
satellite and DSS applications. Power passive to operate
in-line amps and multi-switches. Bandwidth:
5MHz~3000MHz.
Performance to 1000MHz. 2, 3, 4 and 8 way models.
Die-cast housing. RF shielding. Mounting tabs
and grounding blocks.
Section
13
SATV/CATV
RF Distribution Amplifiers
50MHz~1GHz
Broadband
Amplifier
The HDA-1000 is
a low noise linear
distribution amplifier providing high power outputs at
extremely low distortion. The wide bandwidth allows
the user a single amplifier for all distribution frequency
applications; VHF, mid band, super band, hyper band,
ultra band and UHF. Features: •Wide forward frequency
range: 50MHz~1GHz, low noise figure, 30dB gain to
1GHz, surface mount strip line design, designed for
all broadband systems, built-in slope (44dB typical,
55MHz~1GHz) Specifications: •Bandwidth:
50MHz~1GHz •Forward gain: 50MHz~600MHz,
31dB, ± 2dB, 600MHz~1GHz, 32dB, ± 3dB
•Power requirements: 115VAC, 60Hz
Order #
33-2675
(1-9)
$149.00
(10-up)
$141.55
13
Push-Pull
Amplifiers
The CA-30 is
a high quality
push-pull amplifier
producing signals
with extremely low
distortion and harmonic content. The CA-30 enclosure
uses a black anodized aluminum extrusion to assure
reliable heat sinking and corrosion resistance. Features:
•Wide frequency range: 54MHz~550MHz, 30dB gain,
adjustable slope control, adjustable gain control, input
and output test points, designed for CATV apartment
distribution systems Specifications: •Bandwidth:
54~550MHz •Gain: 30dB •Gain adjust range: 0~8dB
•Power requirements: 115VAC, 60Hz, 4W •Slope:
0~8dB variable •Noise figure: CA-30, 5.0dB
Order #
33-2670
(1-9)
$129.00
#33-2840
(10-up)
$122.55
#33-2845
Broadband
Distribution Amplifiers
The ZCM Series includes professional quality, broadband
distribution amplifiers, designed for special purpose
applications in the MATV, SMATV, private and wireless
cable markets. These amplifiers cover the 50~550MHz
frequency range and provide low noise amplification at
a reasonable cost. Two models are available with either
10 or 20dB of gain, each capable of accepting a relatively
high input level. Specifications: ZCM-101 RF:
•Frequency range: 50~550MHz •Gain: 10dB •Noise
figure: 3.5dB •Impedance-all ports: 75ohm General
power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 1.2W •Connectors (top panel):
•RF input: Type “F”, female RF output: Type “F”, female
ZCM-201 RF: •Frequency range: 50~550MHz •Gain:
20dB •Noise figure: 3.5dB •Impedance all ports: 75ohm
General power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 1.4W •Controls (top panel):
Tilt: Var. Control •Connectors (top panel): RF Input:
Type “F”, female •RF output: type “F”, female
Order #
33-2840
33-2845
page
234
Mfr. #
ZCM-101
ZCM-201
(1-9)
$8.99
15.99
(10-up)
$8.54
15.15
Broadband Distribution Amps
#33-8745
#33-8760
For broadband applications up to 1GHz including cable television and digital television. Suitable for medium
sized distribution networks including homes and small condominium complexes. High gain low noise amplifier
with built–in FM trap. Specifications: Frequency range 40~1000MHz. FM trap -20dB. Power: 120VAC.
Order #
33-8745
33-8755
33-8760
Outputs
1
2
4
Gain 36dB
15dB
11dB
Gain Adjust
18dB
10dB
–
(1-9)
$31.99
24.99
26.99
(10-up)
$28.95
23.99
25.60
Broadband Structured
Wire RF Amplifiers
Compatible with the
market leader of
structured wiring
panels, these 5~1000MHz,
®
DOCSIS compliant amplifier modules are the ideal
drop-in replacement for CATV in-home signal
distribution. Improve your multimedia application
with the latest broadband technology for HDTV QAM
signals. Features include a durable, salt-spray-resistant
housing, weather-sealed “F” ports, and exceptional
surge performance.
Order #
33-10225
33-10226
Description
6 output
8 output
Gain
+6.5dB gain
+10.0dB gain
ONLY
$84.99
94.99
#DA-550BID
#DA-550HHR
High Headroom
Distribution Amplifier
The DA-550s can handle an extremely wide range
of input signals from both NTSC and digital HDTV.
With outputs to eight televisions, coax runs up to 150’,
three inputs, one from a CATV or antenna and two from
modulators, the DA-550 is the heart of a multi-room
distribution system. The DA-550BID offers a 5~42MHz
return path for bi-directional communication for use with
cable modems and pay-per-view applications. The
DA-550HHR is used with high performance antenna
applications for off air digital and NTSC signals.
Additional features: IR engine, remote power
and expandable outputs.
Order #
DA-550BID
DA-550HHR
ONLY
$169.00
169.00
Broadband Amplifiers
The BIDA Series are
professional quality,
broadband, two-way capable,
indoor hybrid distribution
amplifiers that are designed
for RF distribution systems,
such as apartment complexes,
hospitals, schools, prisons,
hotels, and a wide variety
of similar applications.
The BIDA Series is ideal for
multi-channel RF distribution
systems whose input source is a “cable drop” or the output
of a MATV/SMATV/CATV headend. Additionally, the
BIDA Series may be used as the launch amplifier in a
distribution network. These amplifiers use dual push–pull
hybrid modules, capable of delivering high output levels
with low distortion, even in systems with over 100
channels of programming. Power doubling models
can be cascaded together with lower distortion resulting
than the push–pull amplifiers allowing the system to
maintain higher signal integrity. The gain and slope
controls are designed between the hybrid modules
for optimum noise figure, input return loss and output
capability. Test ports for both the input and output are
provided for testing signal levels without interrupting
service. The BIDA Series come in a rugged, aluminum
chassis that provides exceptional heat dissipation. This
allows the BIDA Series to be operated at high ambient
temperatures with no degradation of performance or
reliability. The combination of features and durable
construction ensures that the BIDA Series will provide
years of reliable, trouble-free service.
Order #
33-7815
33-7820
33-7850
33-7855
Bandwidth Gain
MHz
dB
49~550 50
49~750 32
49~860 44
49~860 44
1-800-543-4330
Fax: 1-800-765-6960
Description
ONLY
Push–pull
$599.00
Push–pull
549.00
Push–pull
629.00
Power doubling 699.00
Multiple
Dwelling Amplifier
This professional quality, broadband, indoor hybrid
distribution amplifier is designed for RF distribution
systems, such as apartment complexes, hospitals, schools,
prisons, and hotels. It is ideal for those RF distribution
systems whose input source is a cable drop, the output of
a MATV/SMATV headend, or the output of a small CATV
headend. The ACA 30-550 amplifier has a flat 30dB of
operational gain, which is variable using a built-in gain
control. Variable slope control is also provided, with an
available range of 9dB. This amplifier uses a push-pull
technology, capable of delivering high output levels
with low distortion, even in systems with 110 channels
of programming. It is housed in a compact, aluminum
chassis that provides excellent heat dissipation, allowing
the ACA 30-550 to be operated at high ambient
temperatures with no degradation of performance or
reliability. The ACA 30-550 is provided with an external
power transformer for use with 117VAC power. The unit
can also be powered directly with 24VAC. The superior
design guarantees long service at an affordable price. This
high performance hybrid amplifier is the obvious selection
when cost and performance parameters are extremely
tight. Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm
•Mfr. #ACA 30-550
Order #
33-2875
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$276.00
SATV/CATV
RF Distribution Amplifiers
The DA-520A is a
bi–directional amplifier
providing 20dB of forward
gain and 0dB reverse gain. Specifications: Bandwidth:
54~806MHz. Gain: 20dB +/- 1dB.
ONLY
$64.99
Distribution Panel
Creates an ideal entry level
product for broadband
distribution. Has one input for
CATV or off–air antenna and six outputs. Four outputs
are for up to 75' and two are for 150'. Has bi–directional
capabilities allowing for compatibility with cable modem
and interactive set–top boxes. Specifications: Bandwidth
54~806MHz. Gain: 20dB +/- 1dB.
Order #
DA-506BID
ONLY
$82.99
For systems with
up to eight TV
outlets and cable
lengths up to 150'.
The DA-8200 series
provides outputs to
eight televisions, three
inputs from an off–air antenna or CATV and two
modulator locations. The compact design feature ensures
a quick installation for surface mount application or in a
structured wire enclosure like the 2619. The DA-8200
series may be remotely powered from up to 75' away by
using a remote wall plate model 2010 or any 5500 series
or SVM series modulator. The DA-8200 series offers
optional IR control of connected video sources and whole
house IR integration with a 5V IR engine. The easy to use
2133 target connects directly to the coax run of any room
and allows IR signals to be routed to either a 2010
wall plate, 5500 series or SVM series modulator.
The DA-8200BID offers a 5~42MHz return path for
bi–directional communication for use with digital cable
interactive set–top boxes. The DA-8200HHR is used with
high performance antenna applications for off–air digital
and NTSC signals.
Order #
Description
DA-8200BID Bi–directional amplifier
DA-8200HHR High head–room amplifier
Bi-Directional
CATV Amplifiers
ONLY
$169.00
169.00
Specifications: RF:
•Frequency range:
54~220MHz,
470~900MHz •Input
level min: -7.0dB
•Input level-max:
+18dB •Gain: 16dB
(50~22), 12dB (470~800), 10dB (800~900)
•Noise figure: 3.0dB (VHF), 4.0dB (UHF) •Output level
max: +44dBmV •Impedance all ports: 75ohm General:
•Power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 4.2W •Mfr. #ZTA-15
Order #
33-2850
(1-9)
$16.99
A
UHF/VHF/FM
25dB Amplifier
#30-2130
#30-2135
Distribution Amplifiers
•Commercial grade distribution amplifiers can be used for
HDTV, CATV, off-air, analog, and digital RF distribution
•Weather sealed housings •Average noise figure: 2.8dB
•50~1000MHz
Order #
30-2124
30-2125
30-2130
30-2135
Mfr. #
3410
3412
3414
3418
Description
1-way
2-way
4-way
8-way
Gain
15dB
11.5dB
8dB
4dB
ONLY
$34.99
39.99
44.99
59.99
UHF/VHF/FM
36dB Amplifier
Features: •Low
noise •Two
switchable FM
traps •Separate gain controls •AC power indicator •50dB
output capability •-20dB monitor output •Fuse protected
Specifications: •Bandwidth: 54MHz~108MHz,
174MHz~216MHz, 470MHz~812MHz •Gain:
VHF, 31dB; UHF, 36dB •75ohm input/output
•Power requirements: 115VAC; 60Hz •Dimensions:
83⁄4" (L) x 17⁄8" (H) x 33⁄4" (D) •Fuse protected
(10-up)
$16.31
B
Order #
33-0890
(1-9)
$89.99
(10-up)
$85.45
C
UHF/VHF/FM 25dB
(1-9)
$27.99
Features: •Low noise
•High overload
capacity •Lightning
protection at RF input
•Heavy gauge metal
case •On-off indicator
light •Switchable FM trap Specifications:
•Bandwidth (MHz): VHF 54~300; UHF 470~890 •Gain:
VHF, 25dB; UHF, 23dB •Maximum input (dBmV): •VHF,
15; UHF, 17 •Maximum output (dBmV): VHF, 40; UHF,
40 •Noise figure (dB): VHF, low 5.4, high, 6.2; UHF, 14
•Power requirements: 117VAC •Dimensions: 65⁄8" (W)
x 17⁄16" (H) x 33⁄32” (D)
RF
Amplifiers
Features: •Low noise
•Lightning protection
•AC power indicator
•Switchable FM trap
•Low cost Specifications: •Bandwidth: 54~900MHz
•Gain: VHF, 25dB; UHF, 22dB •Maximum input:
VHF, 18dB; UHF, 16dB •Maximum output: 40dB
(54~800MHz) •Noise figure: VHF, 5dB; UHF, 7dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 57⁄8" (W) x 15⁄8" (H) x 3" (D)
Low noise
VHF/UHF/
FM signal
amplifiers.
Variable gain
control –10dB. Built–in FM trap (-20dB). Specifications:
Frequency range: 40~862MHz. Noise figure: <7dB.
Power: 120VAC.
Fig. Order #
A 33-8715
B 33-8720
C 33-8725
(10-up)
$26.55
Outputs
1
2
4
Gain
30dB
25dB
20dB
(1-9)
$17.99
18.99
19.99
(10-up)
$16.60
17.50
18.40
Order #
33-290
RF Amplifiers
Outputs
1
2
4
Gain 10dB
10dB
5dB
(1-9)
$11.99
12.99
14.99
(10-up)
$9.76
12.47
14.39
Follow us on:
Product Questions Email: tech@MCMelectronics.com
(1-9)
$14.99
(10-up)
$14.20
Four-Way
Amplified Coupler
VHF/UHF/FM signal amplifiers for residential
cable and antenna television. 40~862MHz bandwidth.
<6dB noise figure. Operates on 120VAC.
Order #
33-8730
33-8735
33-8740
#30-2125
•50MHz~550MHz
bandwidth •1~3dB gain
•117VAC power required
•One input, four outputs
•Dimensions: 31⁄2" (W) x 21⁄4" (H) x 11⁄2" (D)
A
B
C
Order #
33-1475
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1-9)
$13.49
(10-up)
$12.49
page
235
13
Order # Forward Gain Reverse Gain (1-9) (10-up)
33-7110
15dB
0dB (Flat)
$39.99 $37.95
33-7111
15dB
10dB
47.99 42.95
33-7115
15dB
15dB
44.99 42.70
33-7116
20dB
15dB
59.99 54.95
Fig.
A
B
C
#30-2124
15dB RF Amplifier
Digital amplifiers
with return path for
use with CATV
convertors (pay per
view) and cable modems. Soldered back ensures isolation
and signal integrity. Specifications: Bandwidth:
54~1000MHz. Noise figure: 3.5dB. Power: 12VDC,
250mA via included adapter (using “F” cable).
Order #
33-0450
13
RF Distribution
Amplifier
DA-520A
Order #
DA-520A
Section
Section
13
SATV/CATV
Audio/Video Switches
HDMI 1.3 Input Switch
Back
HDMI Scaling Media Center
•This six-input media center switch allows you to scale all
source inputs to 1080p and send them over a single HDMI
cable to your display •Perfect solution for utilizing older
A/V equipment or PCs with new high definition displays
•Switch among six sources: Two HDMI, two analog
(composite, S-video, or component), and two VGA
Specifications: •HDMI v1.3, HDCP (Input pixel clock
rate: 25MHz~225MHz) •Supports video up scaling to
1080p (pixel clock rate: 25MHz~165MHz) •3D Y/C
separation comb-filter •Aspect ratio: 4:3 or 16:9
•10 bits video processor for analog to digital conversion
•IR remote control and manual control •Dimensions:
133⁄8" x 63⁄4" x 15⁄8"•5VDC, 4A power supply (included)
Order #
33-10800
MSRP
$429.00
•Easily switch between multiple
HDMI sources while running a single
HDMI cable to your high-definition display •Extends the
range of HDMI compliant device by equalizing HDMI
signal •Included discrete IR remote (not included with
#33-10532) •Auto sensing inputs allow switching between
only active HDMI sources Specifications: •Output video:
HDMI 1.3b + HDCP 1.0/1.1 •Video formats supported:
Up to VGA 920 x 1200 and HD 1080P •Video amplifier
bandwidth: 2.5Gpbs/250MHz •External power supply
(included): 2A 5VDC for 110V (neither included nor
required for #33-10532)
Order #
33-10532
33-10533
33-10535
Description
2 x 1
3 x 1
5 x 1
MSRP
$59.95
79.95
109.00
(1-4)
$19.99 29.99 44.99 13
Audio/Video Distribution Amplifers
•Perfect for in­–store display demonstration walls
or karaoke display •One input distributes four or
six amplified outputs •Video and stereo sound input
via RCA jacks •Four or six outputs, video and stereo
sound via RCA jacks •Frequency range: •20Hz~10KHz
•Isolation: 30dB minimum •Video input: 75ohm •Audio
input: 20Kohm •Operates from 15V/300mA adapter
•Adapter included
Description
Four-way
Six-way
•Hook up multiple video game systems, DVDs, VCRs,
and any other A/V device to any TV that lacks the
required number of AV inputs •Four inputs allow you
to automatically switch between desired components
•Features four audio/video, S-video, and component
inputs; composite, S-video and component out
•Component inputs provide ultimate picture performance
and are found on most quality TVs/HDTVs and DVDs
•Easy to hook-up and prevents cable swapping issues that
could result in the jacks on the TV needing to be replaced.
Order #
PH61150
ONLY
$29.99
Six-Way Video Selector
Tabletop video switcher provides independent selection
of up to six A/V sources, routing them to two different
destinations. Select from inputs such as a satellite receiver,
digital cable box, DVD player, DVR, VCR or video game.
Dual outputs, with independent selectors, allow easy
recording of one source, while viewing another, or viewing
of two different sources on separate monitors. Inputs and
outputs are standard line level L/R audio, composite video,
and S-video. S-video connections are standard four-pin
DIN female, all others are RCA type female. Rugged
metal enclosure measures 13⁄4" (H) x 111⁄2" (W) x 51⁄4" (D),
including non-skid rubber feet. Note: Either composite or
S-video inputs may be utilized, but not both. This selector
will not convert from one video format to the other.
Passive device requires no power.
page
236
MSRP
$399.00
ONLY
$99.99
(1-3)
$40.99
(4-up)
$37.95
Remote Control Audio/Video Selector
This switcher can handle almost any consumer audio/
video device you can throw at it. With the most common
audio and video inputs; S-video, composite video, toslink
digital audio and line level audio, you can connect your
DVD, satellite receiver, VCR or game system to your
home entertainment system. The switcher has three
audio/video inputs and one audio/video output and
an ultra thin remote control.
Order #
33-7755
(ea.)
$49.99
(2-4)
$47.49
(5-up)
$45.12
Audio/Video
Switcher
ONLY
$31.99
29.99
Back
MSRP
$69.95
Order #
33-10525
Back
Back
4x1
HDMI Switch
Order #
50-7780
Easily switch between four HDMI sources to two
high-definition displays. Extends the range of HDMI
compliant devices by equalizing and re-clocking the
HDMI signal. Included discrete IR remote control
allows user to switch sources from across the room.
Specifications: •Input/output: HDMI v1.3, HDCP 1.0/1.1
•Video formats supported: Up to computer 1600 x 1200
and HD 1080p •Video amplifier bandwidth: 1.65Gpbs
•Power consumption: 20W (max) •External power supply
(included): 5VDC for 110V •Dimensions: 41⁄2" (L)
x 15⁄16" (H, with feet) x 101⁄8" (W)
ONLY
$199.00
High Definition
Automatic Switcher
Order #
32-4430
32-4435
(5-up)
$19.25
28.50
43.25
HDMI 4 x 2 Matrix Switch
Back
•Four HDMI inputs, one HDMI output •Signal
enhancement feature, improve signal quality by simply
touching a button •LED source indicator light •Slim size
IR remote included Specifications: •HDMI 1.3b, HDCP
and DVI 1.0 compliant •Supported input resolutions:
PC - VGA, SVGA, XGA, SXGA, UXGA (1600x1200),
HDTV -480i, 576i, 480p, 576p, 720p, 1080i and 1080p
•Frequency bandwidth: 1.65gbps (single link) •Inputs:
Three HDMI type A female ports •Output: HDMI
single link female port •Dimensions: 7.9" x 4.1" x .9"
•Weight: 1.25 lbs. •5V universal power supply included
•Mfr. #VS-HD41
Order #
(1-9)
$79.99
(10-up)
$78.25
Add additional
components to
your TV and home theater system by providing additional
A/V inputs to your system. Four A/V inputs including
composite video and Y/C (S–video). Mfr. #SVS-14.
Order #
80-3450
A/V Digital Analog
Selector with IR Remote
ONLY
$24.99
Back
•Perfect for the
entertainment center
•Combines four different
video devices (VCR, laser disc player, etc.)
into one output •Compatible with both mono and stereo
devices •Four audio/video inputs, one audio/ video output
•20Hz~10MHz frequency range •Isolation 30dB minimum
Full-featured switcher connects up to three “like-kind”
sources (HDMI to HDMI, VGA to VGA, etc.) to a single
HDTV display. Features: •HDMI, VGA, RGB component
video, and composite A/V connections •Delivers clean,
uncompressed digital signals •Engineered for optimal
signal transfer and minimal signal loss •Built-in HDMI
output signal extender up to 100' (total length) •H.D.C.P.
(High-Bandwidth Digital Content Protection) compliant
•Supports high definition 1080p and UXGA •Compact,
time-saving LED illuminated control center and easy
selection with remote control or front panel push-button
controls •Power: 6V,400mA AC/DC power adapter
(included) •Dimensions: 121⁄2" x 6" x 21⁄4".
Order #
32-4420
Order #
33-10424
33-10485
Audio/Video Selector
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$19.99
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$167.00
SATV/CATV
Audio/Video Distribution
Section
13
HDMI Distribution Amplifiers
Component Audio/Video
HDTV Distribution Amplifier
4Single input with eight outputs
4Loop through output to cascade additional units
4Accommodates component video (Y/Pr/Pb) applications
4Accommodates L/R line level audio
Component Audio/Video HDTV
Distribution Amplifier with Digital Audio
4Single input with eight outputs
4Loop through output to cascade additional units
4Compatible with Y/Pr/Pb and composite video applications
4Accommodates L/R line level and SPDIF digital audio
Distribute digital and analog television signals, from
a single A/V source to nine televisions/receivers, or use
one port as a loop-thru output port to cascade additional
distribution amplifiers. Features: •Component video
(Y, Pr, Pb, or Y, Cr, Cb), composite video, analog audio
and SPDIF digital audio distribution •High bandwidth
(>50MHz) performance, low distortion, and one-to-one
signal ratio ensures equal picture quality. Power:
9~10VAC, 500mA adapter included. Mfr. #AV901HD.
Order #
33-10090
Distribute digital/HDTV and analog television signals
from a single A/V source to nine televisions/receivers,
or use one of the output ports to cascade additional
distribution amplifiers. Features: •Component video
(Y, Pr, Pb) and audio distribution •Compatible with all
HDTV, digital and analog signals •High performance,
low distortion, one-to-one signal ratio ensures
equal picture quality •Unlimited cascade capability
•Mfr. #AV901COMP
Order #
33-10080
ONLY
$169.00
Split one HDMI source to distribute to multiple highdefinition displays. Ideal for retail displays, entertainment
venues, and multiple residential displays. Extends the
range of HDMI compliant device by equalizing and
boosting the HDMI signal up to an additional 50'.
Specifications: •Input/output: HDMI v1.2a+, HDCP
1.0/1.1 •Video formats supported: VGA 1920 x 1200 and
1080p •Operating frequency: Up to 165MHz •External
power supply (included): 5VDC for 110V
Dimensions (L x W x H)
Order # Description MSRP
3.4" x 1.73" x .66"
33-10540 1 x 2
$179.00
10.625" x 7.18" x 1.83"
33-10542 1 x 4
249.00
17.323" x 7.893" x 1.748"
33-10545 1 x 8
399.00
(1-4)
(5-9)
(10-up)
$49.99 $45.75
-
119.00 113.05 $107.40
249.00 241.53 232.20
Composite
Video to S-Video Adapter
This high quality adapter converts
composite video to S–video and S–video to
composite video. The adapter measures only
13⁄4" long and 1⁄2" in diameter allowing it to plug directly
into the equipment and solves the problems associated
with mixing composite and S–video inputs and outputs.
ONLY
$249.00
High Performance
Distribution Amps
4Single input with four or seven outputs
4Accommodates L/R line level audio and composite video
Order #
33-0001
33-0002
33-0003
Description
S male to RCA female
S female to RCA female
S female to RCA male
(ea.)
$7.89
6.39
6.39
(2-up)
$7.59
6.19
6.19
Order #
33-6875
33-6880
Component Video
Distribution Amplifier
Mfr. #
AV400
AV700
Outputs
Four
Seven
ONLY
$59.99
99.99
TM
Video Ground Loop Isolator
Ground loops Ground loops in composite video systems
can cause video distortions such as herringbone and AC
beat. Uniquely designed to eliminate ground loop related
distortions, this transformer features RCA female-tofemale connectors with a separate 9' RCA male-to-male
pigtail cable that facilitates multiple installation
configurations and helps reduce cable connector strain.
Specifications: •Insertion loss: <0.5db •Frequency
response: 0~3db @ 10MHz •Input/output resistance:
75ohm •Built-in 600VDC transient voltage surge
suppression (12V RMS) •No power required (passive).
4Single input with four outputs
4Accommodates component video (Y/Pr/Pb) applications
4Accommodates L/R line level audio
Four-way audio/component-video distribution amplifier
for Y, Cb, Cr and Y, Pr, Pb applications. Features high
performance, low distortion and true one-to-one signal
ratio. These professional grade amplifiers are cascadable
for use in large displays and are enclosed in metal
housings to reduce interference. Mfr. #AV400COMP.
Order #
33-7050
13
These high performance distribution amplifiers feature
specifications such as a true one-to-one ratio, no signal
loss, low noise, low distortion and unity gain.
ONLY
$99.99
Order #
33-6927
MSRP
$59.95
Component Audio/Video HDTV Distribution
Amplifier with Digital Audio
Back
4Single input with four outputs
4Loop through output to cascade additional units
4Compatible with Y/Pr/Pb and composite video applications
4Accommodates L/R line level and SPDIF digital audio
Allows for multiple signal distribution
equal to the source signal input. Four way audio/video
distribution amplifier with S-video inputs and outputs.
Features high performance, low distortion and true one-toone signal ratio. These professional grade amplifiers are
cascadable for use in large displays and are enclosed in
metal housings to reduce interference. Mfr. #AV400SV.
Distribute digital/HDTV and analog television signals,
including digital audio and composite video from a single
A/V source to five televisions/receivers, or use one
loop-thru output port to cascade additional distribution
amplifiers. Features: •Component video (Y, Pr, Pb,
or Y, Cr, Cb), composite video and SPDIF digital audio
distribution •Compatible with all HDTV, digital and
analog signals •High bandwidth (>50MHz) performance,
low distortion, and one-to-one signal ratio ensures equal
picture quality Power: •9~10VAC, 500mA adapter
included •Mfr. #AV501HDX
Order #
33-7045
Order #
33-10087
S-Video Distribution Amplifier
ONLY
$99.49
Follow us on:
Product Questions Email: tech@MCMelectronics.com
ONLY
$179.00
ONLY
$31.99
A/V Distribution Amplifier/Selector
Front panel pushbutton selects between two input sources,
and internal amplifier maintains signal quality when
distributed to four outputs. Gain at each output is 2dB over
input signal level. Rugged metal enclosure measures 15⁄8"
(H) x 7" (W) x 27⁄8" (D), including non–skid rubber feet.
Color–coded input/output connections are RCA type
female. Requires 12VDC, AC adapter included.
Order #
30-1376
MCMelectronics.com
Email: quotes@MCMelectronics.com
MSRP
$49.95
(1-3)
$29.99
(4-up)
$26.95
page
237
Section
13
SATV/CATV
NEW!
NEW!
#33-9585
HDMI 3 x 1 Switcher and Extension Kit
#33-9590
S-Video Baluns
The VideoEase S-Video Balun allows a single S-video
signal to be transmitted via unshielded twisted pair (UTP)
cable up to 1000' (305m) in a point-to-point connection.
The product is available in two models; the S-Video Balun
(500016) and the S-Video/Audio Balun (500017). Used in
pairs, the S-Video Balun eliminates costly and bulky
S-video cable, allowing S-video equipment to be
connected or moved to any convenient modular outlet.
The S-Video Balun also works in conjunction with
MuxLab’s Audio-Video Distribution Hub (500200) to
allow S-video programming to be distributed via UTP.
Some of the applications are; classroom video distribution,
commercial and home audio/video systems, hospital video
training, video conferencing, and video kiosks. Note:
Baluns must be used in pairs and are sold individually.
•Sold individually
Order #
33-9585
33-9590
Mfr. #
500016
500017
Description
S-Video
S-Video and Audio
ONLY
$26.99
59.99
13
VideoEase™
Composite Video/
Stereo Balun
The VideoEase™ stereo/
video balun allows a
single composite videosignal and stereo audio signal to be
transmitted via UTP cable up to 2,200' in a point-to-point
connection. Features: •Full audio bandwidth response for
high fidelity applications •20Hz~20KHz audio bandwidth
•Built-in color-coded cable leads for ease of installation
•Mfr. #500039 •Used in pairs, sold individually
Order #
33-9626
ONLY
$52.99
Dual Audio/Video Balun
The VideoEase Dual Audio/
Video Balun allows up to
two composite video signals
and up to two unbalanced
audio signals to be transmitted
via unshielded twisted pair (UTP) cable
in a point-to-point connection. The Dual Audio/
Video Balun eliminates up to four coaxial cables, allowing
audio/video equipment to be connected via space-efficient
and cost-effective Cat 5 twisted pair cable. The Dual
Audio/Video Balun also works in conjunction with
MuxLab’s Audio/Video Distribution Hub (500200)
allowing audio/video programming to be distributed
via UTP to up to eight locations. Mfr. #500012. Features:
Up to 2200' (670m) in color via Cat 5 UTP. Pair required
for use, sold individually.
Order #
33-9610
The HDMI 3 x 1 switcher kit allows up to three different
HDMI sources to be connected to one HDMI display via
two Cat 5e unshielded twisted-pair cables in a point-topoint configuration. Push-button input selection is located
on the receiver unit. The kit includes one transmitter and
one receiver, and supports up to 100' (30m) at 1080p via
Cat 5e cable (supports deep color up to 1080i).
Mfr. #500410.
Order #
33-10580
VideoEase™ HDTV
Component Video/
Digital Audio Balun
The component video/
audio balun allows one
component video (YPbPr or RGB) signal and one audio
signal to be transmitted via cost-effective unshielded
twisted pair (UTP) cable in a point-to-point configuration.
Used in pairs, the component digital balun supports 480i/p,
720p and 1080i/p video formats for hi-definition (HDTV)
video applications. Features: •Supports 480i/p up to 1000'
(305m) and 720p/1080i/p up to 500' (152m) via Cat 5
UTP, respectively •Available with color-coded RCA cable
connectors •Supports either digital audio (5000050, or
500051), or analog audio (500052, or 500053) on fourth
twisted pair •Modular shielded RJ-45 connector
•Used in pairs, sold separately
Back
Order #
33-10060
33-10061
33-10062
33-10063
Mfr. #
500050
500051
500052
500053
Connectors
Male RCA Female RCA
Male RCA
Female RCA
Audio
Digital
Digital
Analog
Analog
238
ONLY
$74.99
74.99
74.99
74.99
Stereo A/V Balun
The VideoEase Stereo
Audio/Video Balun allows
a single composite video
signal and a maximum of
two unbalanced audio signals to be
transmitted via unshielded twisted pair (UTP) cable in a
point–to–point connection. The Stereo Audio/Video Balun
eliminates up to three coaxial cables, allowing audio/video
equipment to be connected via space–efficient and cost–
effective Cat 5 twisted pair cable. The Stereo Audio/video
balun also works in conjunction with MuxLab’s Audio/
Video Distribution Hub (500200) allowing audio/video
programming to be distributed via UTP. Features: Up to
2200' (670m) in color via Cat 5 UTP. Pair required for use,
sold individually. Mfr. #500001.
Order #
33-9625
ONLY
$249.00
ONLY
$59.99
The VideoEase™ Component Video
Balun allows a single component video signal (Y,
Pb, or Pr) to be transmitted via cost-effective unshielded
twisted pair (UTP) cable. Three balun pairs are required
for one complete component (YPbPr) video connection.
The product allows three coaxial cables to be replaced by
one Cat 5 twisted pair cable, allowing standard structured
cabling techniques to be used for neater and more
streamlined cabling. The component video balun is
compact enough to allow three units to be connected side
by side on the back of the component video equipment.
Features and benefits: •Supports one component of the
YPbPr video signal •Three balun pairs required per YPbPr
connection •Up to 1,000' (305m) via Cat 5 UTP •Goldplated connector •Cable strain relief •Compact design
•Lifetime warranty •Design patent pending •Mfr. #500021.
Order #
33-9755
ONLY
$25.99
VideoEase™ Audio Balun
The VideoEase™ Audio Balun
allows any unbalanced analog audio
signal to be transmitted via a single unshielded
twisted pair (UTP) cable for more versatile cabling.
Used in pairs, the audio balun eliminates costly and bulky
coax cable, allowing consumer and commercial audio
equipment to be connected using standard premises
wiring techniques. One or two pair of baluns are required
depending on whether the application is for monaural or
stereo audio. The audio balun features screw terminals
and built-in cable strain relief for ease of installation and
reliable connectivity. Applications include auditoriums,
arenas, schools, home theater systems, airports, hotels,
hospitals, conference rooms. Features and benefits:
•Eliminates coax cable •Up to 5,000' (1.5km) via Cat 5
UTP •20~20KHz bandwidth •Gold-plated RCA connector
•Cable strain relief •Compact design •Lifetime warranty
•Design patent pending •Mfr. #500019
Order #
33-9745
ONLY
$25.99
OWLink™ HDMI Light Link
•Allows PS/2 devices to be
located up to 350' away from the
PC •Using inexpensive 4-pair Cat 5
shielded twisted pair or unshielded
twisted pair cable depending on the equipment
used •Used in pairs, eliminates the need for a local
keyboard and mouse •Typical applications include
corporate projection systems, classroom video instruction
and video information systems •Mfr. #500045
page
Order #
33-10575
VideoEase™ Component
Video Balun
ONLY
$59.99
ONLY
$26.99
The VideoEase
HDMI
extender kit
allows HDMI equipment to be
connected up to 200' (60m) via two Cat 5e unshielded
twisted pair cables in a compact point-to-point
configuration at 1080i resolution; up to 100' (30m) at
1080p via Cat 6. The kit comes with one transmitter,
one receiver, and one power supply. Mfr. #500400.
ONLY
$409.00
Videoease PS/2 Convertor Balun
Order #
33-10105
HDMI
Extender Kit
#33-10550
Fiber optic cable
Order #
33-10550
33-10552
33-10554
33-10556
33-10558
1-800-543-4330
Fax: 1-800-765-6960
•Transmit uncompressed high-definition (up to 1080p) HDMI signal up to
1000' of fiber optic cable •Complies with studio-approved HDCP content
protection technologies •Compatible with HR21PRO DirecTV receiver to
send HDTV signal to a separate display up to 1000' away •Built-in IR
repeating to control devices located in a different room •Thin, transparent DLI
fiber optic cables resemble a fishing line and may be installed on the wall to
be virtually invisible •Transmitter/reciever dimensions: 4.4" x 2.28" x 0.95"
FO2800 kit includes: •Transmitter •Receiver •Two HDMI cables •Two 5V,
600mA power supplies •IR sensor •IR emitter
Mfr. #
FO2800
FO50
FO100
FO300
FOC
Description
HDMI over fiber kit
50' fiber optic cable
100' fiber optic cable
300' fiber optic cable
Fiber optic coupler
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$499.00
119.00
159.00
249.00
19.99
SATV/CATV
Section
13
Videoease™
Quad Audio Balun
The quad audio balun
allows up to four analog
line audio signals to be
transmitted via unshielded
twisted pair cable in a point-to-point connection. One pair
of quad audio baluns can replace four coax audio cables
with one Cat 5 cable. Features: •Unbalanced, line-level
analog audio up to 5,000' via Cat 5 cable •Less than 1dB
per pair over frequency range •Mfr. #500033
•Used in pairs, sold individually
Order #
33-10115
ONLY
$59.99
VideoEase™
MonoPro™ XLR
The MonoPro™ XLR
connectors allow a
standard AES analog or
digital audio channel to
be connected via Cat 5 #33-10055
unshielded twisted pair
cable (UTP) in the professional audio environment.
The product features rugged cable strain relief and
comes with locking XLR3 connectors for added cabling
versatility. Features: •Rugged cable strain relief •Line
analog audio up to 5,000' (1.5km) via Cat 5 •Digital audio
up to 1,400' (426m) via Cat 5 •Wires terminate inside
product •Locking XLR3 connector •Optional wire terminal
for ground/shield (if required) •Up to 5,000' and 1,400' via
Cat 5 for analog or digital audio, respectively.
Order #
33-10050
33-10055
Mfr. #
500025
500026
Description
MonoPro™ XLR male
MonoPro™ XLR female
ONLY
$35.49
35.49
The VideoEase™
CCTV Pass-Thru
Balun allows video,
two-wire PTZ control, and remote power to be transmitted
via one 4-pair Cat 5 cable, thus eliminating the need to
install multiple cables for more efficient cabling in the
CCTV security and surveillance environment. The passthru balun may be used in pairs, or in conjunction with
standard twisted pair cross-connect devices and other
MuxLab CCTV baluns such as the 500000, 500009,
500023 and 500015. Features: •Combines video, PTZ
control and remote power under one 4-pair Cat 5 cable for
more efficient cabling •Video up to 2,200' (670m) via Cat
5 UTP •Remote power up to 350' (106m) @ 24VAC/5VA
via two twisted pairs •Mfr. #500022
Order #
33-10065
ONLY
$29.99
Order #
33-10110
ONLY
$69.99
The rackmount balun chassis is designed as a head-end
cable management solution to allow any combination of
MuxLab square baluns to be installed in a 19" relay rack.
Features: •Supports up to 16 baluns •Baluns install
forward rear-facing •Space efficient, 2U height
•Latching mechanism for secure installation
•Snap-in design for ease of installation •Includes
four rackmount screws and washers •Slot number
silkscreen on front and rear •Mfr. #500900
Order #
33-9620
ONLY
$219.00
Follow us on:
Product Questions Email: tech@MCMelectronics.com
#33-10256
HDTV Audio/Video
Distribution Hub and Receiver
4Accommodates component video
(Y/Pb/Pr) plus digital audio
4Active video amplifier circuit
4Loop through output send for multiple receivers
4IR remote path
Distribute high-definition component video and digital
or left or right audio over extended distances using Cat
5e wire. Video and audio loop output to accommodate
future expansion to additional Cat 5e transmitters and
receivers. Supports 1080i video up to 300' with Cat 6.
Order #
33-10255
33-10256
Mfr. #
Cat5TX
Cat5RX
Description
Transmitter
Receiver
ONLY
$119.00
119.00
Videoease Active VGA Balun Kit
•Extends the distance between the computer system
unit and a remote display monitor by up to 480'
•It accomplishes this by means of a local transmitting
unit, and remote receiving unit, connected by standard
Cat 5 twisted pair ethernet cable Features: •Uses Cat 5
ethernet cable: For economy; easy installation; and utmost
data transfer reliability •High resolution video: Up to 1800
x 1440 at 100 meters •Supports VGA and SVGA monitors
•Long distance transmission, up to 160m (480') •Local
unit includes port for local monitor •Mfr. #500035
Order #
33-10120
ONLY
$359.00
CATV Balun
The VideoEase
CATV Balun allows
traditional 75ohm
coaxial cable to be
replaced by a single pair of Cat 5 UTP cable in the CATV,
VHF and FM environments in certain applications. The
CATV Balun allows broadband CATV equipment to be
integrated into structured cabling systems thereby allowing
CATV equipment to be moved or added to any convenient
modular wall outlet. The VideoEase CATV Balun provides
a versatile cabling solution for broadband video systems
used by schools, government, corporations, hospitals,
financial institutions, hotels and convention centers. The
CATV balun works in conjunction with CATV splitters,
amplifiers and cable modems for a total cabling solution.
Mfr. #500302 Features: Low return loss eliminates
“ghosting”. Pair required for use, sold individually.
Order #
33-9630
16 Port Rackmount Balun Chassis
#33-10255
HDMI over Category 5 UTP
ExtenHD™ transmitters and receivers work together to
allow HDMI digital signal path transmission over Cat 5
or Cat 6 UTP cable (two cables required) up to 250 meters.
Used in pairs (sold separately), the transmitter and receiver
allow you to switch between two HDMI source inputs.
Features: •Compliant with HDMI 1.2, HDCP 1.1 and
DVI 1.0 specifications •Supports resolutions up to 1080p
at 50/60Hz. Specifications: •Input: One HDMI female
port •Output: One Cat 5 (RJ-45) jack for video and
one Cat 5 (RJ-45) jack for DDC •Power: 5VDC
power supply adapter (included) Dimensions:
123" (W) x 125" (D) x 30" (H).
Order #
33-10450
33-10451
Mfr. #
X-CAT TRAN
X-CAT 50
Description
Transmitter
Receiver (50m)
ONLY
$79.99
79.99
ONLY
$44.99
VideoEase™ VGA Balun II Over UTP
VideoEase™ VGA Balun II is a passive device that fully
supports VGA and SVGA (RGBHV) transmission via one
Cat 5 UTP cable without the need for shielded twisted pair
(STP) cable. This breakthrough technology allows VGA
equipment to be deployed more easily in both new and
pre-wire structured cabling environments. Used in pairs,
sold individually.
Decora Mount Balun Fixture
The wall mount balun fixture allows
any MuxLab square balun to be installed
behind a decora compatible wall plate for
custom AV installation. Each balun snaps
into place and is held firmly by a spring
latching mechanism. The one-piece design
makes the product easy to install and
maintain. There are no parts to lose
or replace. Mfr. #500910.
Order #
33-10585
ONLY
$34.99
Order #
33-9601
33-9602
33-9603
Description
PC side (HD15-male)
Monitor side (HD15-female)
Monitor side (HD15-male)
MCMelectronics.com
Email: quotes@MCMelectronics.com
Mfr. #
ONLY
500040 $74.99
500041 74.99
500042 74.99
page
239
13
VideoEase™
CCTV Pass-Thru
Balun
Videoease Quad Video Balun
•Developed for the security video and audio-video
markets, the quad video balun allows up to four composite
video channels to be transmitted over one Cat 5 cable, thus
replacing up to four coaxial cables for more cost-efficient
cabling •Supporting composite video up to 2,200' (670m)
via Cat 5 cable and works in pairs •Streamlining cabling
in applications such as security video, video-conferencing,
classroom instruction, tradeshow demos, PC-training,
airline information systems and home entertainment
systems •Mfr. #500032 •Used in pairs, sold individually
Section
13
SATV/CATV
#50-10255
Audio/Video to Category 5 Balun System
Take advantage of Cat 5 (or higher) cable for interconnecting A/V components over long distances.
Common signal formats such as composite video, RGB component video, S–video and line level audio
can easily be sent over UTP cable distances from 400'~1000' depending on model. In retrofit applications,
utilize existing unused pairs of Cat 5 data cable already in place. In new construction, take advantage of
the smaller size and lower cost of Cat 5 cable when distributing signals throughout the structure. Housed
in compact ABS enclosures, each balun accepts standard RJ-45 male connectors. Completely passive
design, these units require no power. Each unit is clearly labeled to identify which RJ-45 connector pair
is used for the designated signal path. Sold individually, all baluns must be used in pairs.
#50-10265
#50-10270
VGA Balun Series
#50-7730
4Interchangeable wall plate and stand alone models
4Accommodates VGA signals
4Range up to 450' depending upon resolution
#50-7724
#50-7722
#50-7768
#50-7751
#50-7750
Audio/Video to Category 5 Balun System
13
This system allows installers to take advantage of Cat 5 (or higher) cable for interconnecting A/V components over long
distances. Common signal formats such as composite video, RGB component video, S-video and line level audio can
easily be sent considerable distances over UTP cable. Housed in compact ABS enclosures, baluns accept standard RJ-45
male connectors or unterminated UTP cable. Completely passive design, these units require no power. Sold individually,
all baluns must be used in pairs. For complete information on all models, see MCMelectronics.com.
Order # Type
Cat 5 Connection
50-7710 Composite video
RJ-45
50-7720 Component video
RJ-45
50-7722 Component video, digital audio
RJ-45
50-7724 Stereo audio
RJ-45
50-7725 Stereo audio
RJ-45
50-7730 Audio/composite video
RJ-45
50-7732 Audio/composite video
RJ-45
50-7735 S-video
RJ-45
50-7740 S-video/stereo audio
RJ-45
50-7742 Audio Tooless IDC
50-7745 Composite video + DC power
RJ-45
50-7746 Composite video + DC power
RJ-45
50-7748 Composite video Tooless IDC
50-7750 Composite video Tooless IDC
50-7751 Composite video Tooless IDC
50-7768 Quad composite video RJ-45
50-7769 Quad composite video RJ-45
A/V Connections
Distance MSRP
RCA female (yellow)
1000'
$34.95
RCA female (red/blue/green)
400'
99.95
RCA male pigtails (red/blue/green), 400'
109.00
female RCA (orange)
RCA male pigtails (red/white)
1000'
69.95
RCA female (red/white)
1000'
59.95
RCA female (red/white/yellow)
400'
79.95
RCA male pigtails (red/white/yellow) 400'
79.95
Female S-video
400'
39.95
Female S-video plus RCA female 400'
99.95
(red/white)
RCA male
1000'
25.95
BNC male (video), screw terminals 1000'
35.95
(DC power)
BNC male (video) on pigtail, 1000'
39.95
screw terminals (DC power)
RCA male
1000'
25.95
BNC male
400'
25.95
BNC male on pigtail
1000'
29.95
RCA female (yellow) x 4
1000'
74.95
BNC female x 4
1000'
74.95
Active HDMI Over Dual
Category 5 Balun Set
Complete kit
consists of an active
transmitter and
receiver set for
sending HDMI signals
over dual Cat 5e or Cat 6
cable runs. The transmitter unit connects
to the HDMI audio/video device with a HDMI connection.
The receiver is located near the HDTV display source and
connected to the display source with a HDMI connection.
Then, the transmitter and the receiver units are connected
together with two Cat 5 cables that transmit a pristine high
definition signal between the A/V device and the HDTV
display up to 200' (720p). Power is required at the receiver
end, UL listed AC adapter is included. Features: •Supports
computer resolutions up to 1920 x 1200 (WUXGA), 12 bit
color depth •HDMI version 1.3 compliant •H.D.C.P. (High
Bandwidth Digital Content Protection) compliant
Distances: •720p: 200' •1080i: 165' •1080p: 100'
Specifications: •Video amplifier bandwidth: 2.25Gbps
•Single link range: 1080p •Input video signal: 0.5~1.0V
p-p •Input DDC signal: 5V p-p (TTL) •Data speed transfer:
10.2Gbps •Power requirements: 5VDC •Dimensions (each
unit): 2" (W) x 1.88" (H) x 3.25" (D)
Order #
50-10245
page
240
MSRP
$199.00
#50-10250
ONLY
$84.99
#50-7727
ONLY
$15.99
58.99
63.99
34.99
29.99
46.99
46.99
23.99
34.99
21.99
15.49
15.99
17.99
44.99
34.99
#50-7728
Send two balanced channels of line level audio over a
single Cat 5 cable at distances of up to 1000'. Benefit from
Cat 5 cables smaller size and lower cost when running long
distances, and take advantage of unused cable pairs that
already may be in the structure. Rugged steel housing
features two XLR connectors on one side, and a single
female RJ-45 connector on the other. Compatible with
commonly available pre-terminated network cables, the
unit includes full termination instructions. Specifications:
•Frequency response: 10Hz~50KHz, -0.5dB, +4dB
•THD: 0.1% @1KHz •Dimensions: 1.1" (H) x 3.5" (W)
x 2.5" (D) •Male and female models may be intermixed
•Sold individually, baluns must be used in pairs
XLR Female
Male
MSRP
$109.00
109.00
1-800-543-4330
Fax: 1-800-765-6960
(1-3)
$63.99
59.99
VGA
Order # Type
Side ConnectorMSRP (1-3) (4-up)
50-10250In-line
PC
Male $99.95$44.99$37.95
50-10255In-line
Monitor Female 99.95 44.99 37.95
50-10265Wall plate PC
Female 99.95 44.99 37.95
50-10270Wall plate Monitor Female 99.95 44.99 37.95
15.99
19.99
Two Channel Balanced Audio Balun
Order #
50-7727
50-7728
Ideal when computer monitor or other high resolution
video signal needs to be sent long distances. Cable runs are
greatly eased by the use of smaller, lower cost Cat 5 UTP
cable. These are perfect for installation of multimedia
systems in educational environments, boardrooms and
public areas. All units consist of an HD-15 connector for
connection to the PC or monitor, and a female RJ-45 for
connection to the UTP cable. Four different configurations
are available, allowing a wide variety of installation
possibilities. Distance (Cat 5): •VGA (640 x 480): 450'
•SVGA (800 x 600): 350' •XGA (1024 x 768): 250' •SXGA
(1280 x 1024): 200' Note: Baluns are sold individually and
must be used in pairs. A pair must include one PC side
balun and one monitor side balun.
(4-up)
$57.95
53.95
Audio/Video Hub
The VideoEase Audio-Video Hub allows up to two
baseband composite or one S-video signal and up to two
audio signals to be distributed to up to eight destinations
via twisted pair (UTP) cable for more cost-effective and
versatile cabling. The Audio-Video Hub when used in
conjunction with MuxLab’s line of VideoEase baluns,
allows coaxial cable to be eliminated between the audiovideo source and the destinations. The product works with
the CCTV Baluns (500000, 500009), Stereo Audio-Video
Balun (500001), Dual Audio-Video Balun (500012) and
S-Video Baluns (500016, 500017). A looping output
allows the source input to be distributed to other baseband
audio/video equipment including matrix switchers,
multiplexers, VCRs and monitors. Applications include:
Classroom audio/video instruction, corporate audio/video
presentations, tradeshow demonstration systems, CCTV
security and surveillance. Features: Up to 2200' in color via
Cat 5 twisted pair cable. 2-year warranty. Mfr. #500200.
Order #
33-9615
ONLY
$499.00
Videoease PS/2
Convertor Balun
•Allows PS/2 devices to be
located up to 350' away from
the PC •Using inexpensive 4-pair Cat 5 shielded twisted
pair or unshielded twisted pair cable depending on the
equipment used •Used in pairs, eliminates the need for a
local keyboard and mouse •Typical applications include
corporate projection systems, classroom video instruction
and video information systems •Mfr. #500045
Order #
33-10105
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$26.99
SATV/CATV
Keystone
Mount
Composite
Video Balun
Intended to send
composite video
signal over Cat 5 cable, this balun features an RCA female
connector with yellow insert, for easy identification as the
video path. Rear mounted IDC connector allows simple,
fast connection to unterminated Cat 5 cable. Maximum
distance: 1000'. Sold individually.
Order #
50-7715
MSRP
$34.95
(1-3)
$12.99
(4-up)
$11.69
Keystone Mount Component Video Baluns
Intended to send Y/Pb/Pr component video signals over
Cat 5 cable, these baluns are sold as individual red, blue
and green units. Internally identical units feature RCA
female connectors with the appropriate color code insert,
for easy identification of each video signal path. Rear
mounted IDC connector allows simple, fast connection
to unterminated Cat 5 cable. Sold individually.
Color
Red
Blue
Green
MSRP
$34.95
34.95
34.95
(1-3)
$13.49
13.49
13.49
(4-up)
$11.95
11.95
11.95
Intended to send
composite video signal over Cat 5 cable, this balun
features a BNC female connector and is ideal for use
in video surveillance applications. Rear mounted IDC
connector allows simple, fast connection to unterminated
Cat 5 cable. Maximum distance: 1000'. •Sold individually
Order #
50-7716
MSRP
$34.95
(1-3)
$10.49
Keystone Audio Baluns
Order #
50-7755
MSRP
$34.95
(1-3)
$18.99
Intended to send line level audio signals over Cat 5
cable, these baluns are sold as individual red and white
units. Internally identical units feature RCA female
connectors with the appropriate color code insert,
for easy identification of left or right audio channel.
Rear mounted IDC connector allows simple, fast
connection to unterminated Cat 5 cable. Maximum
distance: 1000'. Sold individually.
Order #
50-7760
50-7761
Color
Red
White
MSRP
$36.95
36.95
(1-3)
$13.49
13.49
(4-up)
$12.19
12.19
(4-up)
$16.95
Use to send Y/Pb/Pr
component video signal
up to 1080i, plus digital
audio over a single Cat 5
cable. This balun mounts
in a standard single
gang opening and is
compatible with standard
Front
Back
decora style wall plates.
It utilizes four RCA female jacks color coded red, blue,
green and orange on the front, with a female RJ-45 jack
on the rear. Sold individually, all baluns must be used in
pairs, and may be used in conjunction with MCM balun
models #50-7722 and 50-7720. Place one balun at each
end of a Cat 5 cable up to 400' in length. Utilizes four
Cat 5 cable pairs: •Red: Pin 7/8 •Green: Pin 3/6
•Blue: Pin 1/2 •SPDIF: Pin 4/5 •Distance:
1000' max, using 24AWG UTP
Order #
50-10295
Video Balun Wall Plate
(1-3)
$37.99
(4-up)
$34.50
Back
Use to send composite
video signal over Cat 5
cable. This balun mounts in
a standard single gang
opening and is compatible
with standard decora style
wall plates. It features a
yellow female RCA
connector, and female
RJ-45 jack. Sold individually, all
baluns must be used in pairs, and
may be used in conjunction with
MCM balun models #50-7710,
50-7748, 50-7745 and 50-7750. Place one balun at each
end of a Cat 5 cable up to 1000' in length. Utilizes one pair
(pin 7/8) of Cat 5 cable. Specifications: •Bandwidth:
50Hz~8MHz •Distance: 1000' max, using 24AWG UTP
Order #
50-10280
MSRP
$109.00
(1–3)
$13.99
(4–up)
$12.50
Back
50-10285
Product Questions Email: tech@MCMelectronics.com
Back
50-10287
L/R Audio Video
Balun Wall Plate
L/R Audio Balun Wall Plates
Use to send two channels of line level audio signal over
Cat 5 cable. This balun mounts in a standard single gang
opening and is compatible with standard decora style
wall plates. They are available with either dual RCA
female or single 3.5mm stereo jacks on the front, with a
female RJ-45 jack on the rear. Sold individually, all baluns
must be used in pairs, and may be used in conjunction with
each other, or MCM balun models #50-7724, 50-7725 and
50-7742. Place one balun at each end of a Cat 5 cable up
to 1000' in length. Utilizes two Cat 5 cable pairs: •Red:
Pin 1/2 •White: Pin 3/6 Specifications: •Bandwidth:
10Hz~50KHz •Distance: 1000' max, using 24AWG UTP
Order #
50-10285
50-10287
Follow us on:
Front
Type
Red/white RCA
3.5mm stereo
(1–3)
$18.99
18.99
(4–up)
$17.19
17.09
Use to send two channels of line level audio, plus
composite video signal over a single Cat 5 cable.
This balun mounts in a standard single gang opening
and is compatible with standard decora style wall plates.
It utilizes three RCA female jacks color coded red, white
and yellow on the front, with a female RJ-45 jack on the
rear. Sold individually, all baluns must be used in pairs,
and may be used in conjunction with MCM balun
#50-7732 and 50-7730. Place one balun at each end
of a Cat 5 cable up to 1000' in length. Utilizes three
Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow:
Pin 7/8 Specifications: •Audio bandwidth: 10Hz~50KHz
•Video bandwidth: 50Hz~8MHz •Distance: 1000' max,
using 24AWG UTP
Order #
50-10290
MCMelectronics.com
Email: quotes@MCMelectronics.com
(1–3)
$26.99
(4–up)
$24.50
page
241
13
Intended to
send digital audio
(SPDIF) signal over
Cat 5 cable, this balun features an RCA female connector
with orange insert, for easy identification as the digital
audio path. Rear mounted IDC connector allows simple,
fast connection to unterminated Cat 5 cable. Maximum
distance: 1000'. Sold individually.
Compact individual
baluns combine
the advantages
of Cat 5 cable for
interconnecting A/V
components over long
distances, with the
flexibility of Keystone
wall plates. The rear of the balun features a specially
designed tool-less IDC connector for easy connection
of unterminated Cat 5 cable. The front is a RCA female
connector. Configure Keystone wall plates with exactly
the connections that are needed for each independent
application. Baluns are effective at distances from
400'~1000' depending on model, and may be intermixed
with other MCM Custom Audio Baluns. Sold
individually, all baluns must be used in pairs.
Component Video
Plus Digital Audio
Balun Wall Plate
(4-up)
$9.29
Keystone
Mount Digital
Audio Balun
13
Keystone Mount
Category 5 Baluns
Order #
50-7765
50-7766
50-7767
Keystone
Mount
Composite
Video Balun
Section
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising