Frigidaire FCGM181RQB User manual

Frigidaire FCGM181RQB User manual
COMMERCIAL
FREEZER/REFRIGERATOR
TABLE OF CONTENTS
Product Registration…………………............……………….….......2
Important Safety Instructions………..........……………….….......2
First Steps..................................................................................3
Appliance Start-up……………………………............……..............6
Features……………………………………………………....................6
Care and Cleaning……………………………………...........7
Energy-Saving Tips....….....……………………....................8
Power Failure.....................................................................8
Before You Call.......…………………………………................9
Wiring Diagram……………………………………………..................11
Warranty...........................................................................12
READ AND SAVE THESE INSTRUCTIONS
A01063703 (May 2016)
Important Safety Instructions
Product Registration
Read all instructions before using
this appliance.
WARNING
For Your Safety
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this unit or any other appliance. Read product
labels for flammability and other warnings.
Read and Save These Instructions
These instructions include information
which is intended to assure the operator of
correct installation, operation and service.
Before attempting installation, adjustment or
maintenance, be certain of the following:
WARNING
Child Safety
• That you have read and fully understand
the instructions.
• Destroy carton, plastic bags, and any
exterior wrapping material immediately
after the appliance is unpacked.
Children should never use these items
for play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch
wrap may become airtight chambers
and can quickly cause suffocation.
• That you have all the tools required and
are trained to use them.
• That you have met all installation and
usage restrictions and are familiar with the
functions and operations of the unit.
• Remove all staples from the carton.
Staples can cause severe cuts, and
destroy finishes if they come in contact
with other appliances or furniture.
• That you follow all instructions exactly
as given.
All the fittings, measurements, recommendations
and procedures are significant. Substitutions
and approximations must be avoided. Improper
handling, maintenance, installation and
adjustment, or service attempted by anyone
other than a qualified technician, may void the
future warranty claims and cause damage to the
unit and/or result in injury to the operator and/
or bystanders.
• An empty, discarded ice box,
refrigerator, or freezer is a very
dangerous attraction to children.
• Remove and discard any spacers used to
secure the shelves during shipping. Small
objects are a choke hazard to children.
Proper Disposal of Appliance
Record your Model and
Serial Numbers
WARNING
Record the model number and serial number
of this appliance in the space provided below
(the serial plate is located inside the
cabinet compartment).
Risk of Child Entrapment
Child entrapment and suffocation are not
problems of the past. Junked or abandoned
refrigerators or freezers are still dangerous
– even if they will sit for “just a few days”.
If you are getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents:
Model Number:
Serial Number:
Purchase Date:
Register Your Product
• Remove the door.
The self-addressed PRODUCT
REGISTRATION CARD (shown above)
should be filled in completely, signed and
returned to the address provided.
• Have the
refrigerant
removed by a
qualified technician.
2
Important Safety Instructions
Electrical Information
Other Precautions
WARNING
WARNING
• NEVER unplug the appliance by
pulling on the power cord. Always grip
the plug firmly and pull straight out
from the receptacle.
These guidelines must be followed to ensure
that safety mechanisms in the design of this
appliance will operate properly.
WARNING
• To avoid electrical shock, unplug the
appliance before cleaning.
Avoid fire hazard or electric shock. Do not
use an extension cord or an adapter plug. Do
not remove any prong from the power cord.
 NOTE
Turning the control to “OFF” turns off the
compressor but does not disconnect power
to other electrical components.
Grounding type
wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Power supply
cord with 3-prong
grounding plug
• Refer to the serial plate for correct
electrical rating. The power cord of the
appliance is equipped with a three-prong
grounding plug for protection against
shock hazards. It must be plugged directly
into its own properly grounded threeprong receptacle, protected with a 15-amp
time delay fuse or circuit breaker. The
receptacle must be installed in accordance
with the local codes and ordinances.
Consult a qualified electrician. Receptacles
with Ground Fault Circuit Interrupters
(GFCI) are NOT RECOMMENDED. DO
NOT USE AN EXTENSION CORD OR AN
ADAPTER PLUG.
First Steps
Inspection for Damage
Inspect the underside of the cabinet and
packaging for damage, similar to what can
be caused with a forklift. If hidden damage
is found after uncrating, immediately call the
delivery carrier and request an inspection.
Retain all packaging and crating materials until
the inspection is complete.
Parts and Accessories
Check to make sure that you have received the
box containing all of the components listed below.
• If the voltage varies by 10% or more,
appliance performance may be affected.
Operating the appliance with insufficient
power can damage the compressor.
Such damage is not covered under the
warranty. If you suspect your voltage is
high or low, consult your power company
for testing.
• To prevent the appliance from being
turned off accidentally, do not plug the
unit into an outlet controlled by a wall
switch or pull cord.
• DO NOT pinch, knot, or bend the power
cord in any manner.
A
Carriage Bolt (4)
B
Lock Nut (4)
C
Swivel Casters (2)
D
Fixed Caster (2)
E
Hex Screw (10)
C
3
A
D
B
E
First Steps
Tools Needed
The following tools are required to assemble and install the casters to the unit:
5/16”, 3/8” and 9/16”
Socket or Open End Wrench
Adjustable
Wrench or
Pliers
Phillips
Screwdriver
Uncrating and Set-up
1.Remove carton and all loose parts from
inside the unit.
2.Remove the rear access guard and place
it and the screws in a safe place for
reassembly later.
3.Using an assistant, carefully tip the unit onto
its back and rest on blocks to avoid damaging
the condensate drain hose and the plastic
raceway that covers the evaporator tubing on
the back of the cabinet.
Front Bracket &
Leveling Legs
Figure 1
4.Remove and discard the two front
brackets with leg leveler using a 5/16”
socket wrench. See Figure 1.
Door
support
bracket
5.FOR GLASS DOOR MODELS ONLY Remove bottom door support bracket and
screw opposite the door hinge using a ⅜”
socket wrench. See Figure 2.
Figure 2
Door Swing Reversal
(stainless steel door models)
A door reversal kit is included with reversible models. If it is misplaced, order a service kit from
Frigidaire Commercial Service Center at 1-866-738-1640.
• For right hand swing doors, order kit #5304488173.
• For left hand swing doors, order kit #5304487215.
 NOTE
Only Solid Door refrigerators can be reversed. Glass Door refrigerators cannot be reversed.
4
First Steps
Front Fixed Caster Installation
Locate and align fixed caster (with brake lever
facing front of unit - see Figure 3) over the
same mounting holes from bracket in Figure 1
using 6 hex screws (3 for each caster). Secure
the screws snug using a ⅜” open end wrench.
Repeat this procedure for opposite corner. DO
NOT OVERTIGHTEN.
(2) Carriage
bolts with
lock nut
Brake lever
Swivel caster
Figure 5
4.Repeat the same procedure for the
opposite rear corner.
Front
of unit
Fixed
caster
Install caster
using (2) hex
screws
5.With the help of an assistant, carefully
upright the unit. Reassemble the rear
access guard with screws.
Hex
Screws
(3)
CAUTION
Figure 3
Rear Swivel Caster Installation
Unit will roll forward as it is tipped up.
1.Remove and discard the screws shown in
Figure 4 from each bottom corner using a
5/16” socket wrench.
Appliance Placement
Leave a 1” space on all sides and the back of
the cabinet for ease of installation, proper air
circulation and electrical connections. DO NOT
block the front grill on the lower front of your
appliance. Sufficient air circulation is essential
for the proper operation of your appliance.
Choose a place that is near a grounded electrical
outlet. For the most efficient operation, the
appliance should be located where surrounding
temperatures will not drop below 40ºF (5ºC)
or exceed 110ºF (43ºC). Additional compressor
heaters are not recommended.
Remove screw
before installing
caster. Repeat
for opposite
corner
Figure 4
2.Locate and align swivel caster over the
holes and install with 2 hex screws.
Secure the screws snug using a 3/8”
socket wrench. DO NOT OVERTIGHTEN.
Insulation
The insulated space of this cabinet is sealed
to maintain peak efficiency. Holes drilled in
the cabinet may destroy that seal and damage
electrical wiring located in the insulated space.
DAMAGED ELECTRICAL WIRING OR
WET INSULATION CAUSED BY DRILLING
WILL VOID THE WARRANTY.
3.On the opposite side of the swivel caster
plate, insert 2 carriage bolts through the
compressor support rail and swivel caster
plate. Use a lock nut on each bolt and
tighten securely using a 9/16” socket
wrench. See Figure 5.
5
Appliance Start-up
Features
Once the appliance has been located in its
permanent location and the proper power and
grounding has been provided, the following
items must be checked or completed:
• Heavy-duty epoxy powder-coated
adjustable shelves
Cool Down Period
• 2-½” urethane foam cabinet insulation
For safe food storage, allow 24 hours for the
appliance to cool down completely before
loading with food. The appliance will run
continuously for the first several hours. Do not
place any food in the appliance until after the
first 24 hours of operation.
• Torsion-spring door closer
• NSF-certified top-mounted evaporator
• Heavy-duty fixed and swivel casters
• 17-watt fluorescent lamp
• Stainless steel evaporator housing
• Removable stainless steel drain cover
Thermostat Setting
The appliance is shipped from the factory with
the thermostat set at about the mid-point of
the operating range. Adjustments colder or
warmer can be made after the appliance has
been running for at least 8 hours. Allow at least
8 hours for temperature stabilization before readjusting the thermostat.
• Adjustable temperature control
Defrost Setting
• Heavy-duty removable stainless steel
shelf support
• NSF-certified interior
• Heavy-duty front grill
• Heavy-duty commercially rated electrical
harness
The appliance is designed to defrost
automatically every 12 hours. To set the
time of defrost, wait until the desired time
to defrost. With the notch on the timer knob
aligned with the line on the bracket (Figure
6), turn the defrost timer knob clockwise
slowly. The timer will click several times, then
once loudly, at which point the defrost cycle
begins. The timer knob will advance through
the defrost cycle, then click loudly at the
end of the cycle. The appliance will defrost
automatically every 12 hours after the first
defrost cycle.
This appliance is provided with 4 shelves.
One goes on the floor of the cabinet and the
other 3 are placed in the metal side supports
wherever they are needed. The shallow shelf
goes in the upper position.
Shallow
Shelf
Regular
Shelves
For example, to set the appliance to defrost
at 10:00 AM, turn the timer knob clockwise
at 10:00 AM until the timer clicks loudly. The
appliance will defrost daily at 10:00 AM and
again 12 hours later at 10:00 PM. NOTE: The
appliance interior temperature will rise slightly
during the first defrost cycle.
Bottom
Shelf
Casters
The appliance comes with 4 casters; 2 with
locks for the front of the unit and 2 without
locks for the back of the unit. The casters
allow you to move the unit to it’s final
destination with ease. The casters can then be
locked into place.
This security lock fastens the lid snugly,
ensuring that stored food is secure. To lock or
unlock the freezer, slide the key into the lock
and turn. The key pops out of the lock after it
has been turned.
Figure 6
6
Features
Care and Cleaning
NSF Certified Temperature Gauge Cleaning the Interior
This appliance is equipped with an NSFcertified temperature gauge to display cabinet
internal temperature. The temperature
gauge is located on the top right side of the
evaporator housing inside the unit.
Be sure to turn the temperature control to
“OFF” and unplug the electrical cord. Wash
the inside surface of the storage area with a
solution of 1 tbsp. (12 g) of baking soda
in 1 qt. (1 l) warm water. Rinse thoroughly
with clean, warm water and wipe dry.
Cleaning the Exterior
Wipe the cabinet exterior occasionally with a
cloth dampened in mild detergent and water.
Rinse and wipe dry with a soft cloth. Do not
use razor blades or other sharp instruments
that can scratch the appliance surface when
removing adhesive labels. Any glue left from the
tape can be removed with a mixture of warm
water and mild detergent or touch the residue
with the sticky side of tape already removed.
DO NOT REMOVE THE SERIAL PLATE.
Fluorescent Lamp (glass door models)
The Glass Door Refrigerator is equipped with
a 17 watt fluorescent lamp. A ballast – lamp
mismatch may result in poor or no lighting.
Condensate Pan
If the lamp fails, replace with a lamp of the
same type and wattage. Also, replace a lamp
that flickers continuously. This could damage
the ballast.
Some models have a condensate pan in a fixed
position located behind the toe grill. This must not
be removed from under the cabinet. If the pan is
removed, condensate will drop onto the floor.
Turning the light off, when not in use, will save
energy. However, frequent ON-OFF cycling will
reduce the lamp life.
Use only NSF certified lamp which can be
ordered from your Frigidaire Commercial
Service Center by calling 1-866-738-1640.
Interior Light
(stainless steel door models)
The stainless steel door models are equipped
with a 40-watt bulb that lights up when the
door is opened. If the bulb goes bad, replace
with bulb of the same type and wattage. This
is a special bulb with a shatterproof coating.
Use only an NSF-certified bulb of the same type
and wattage which can be ordered from your
Frigidaire Commercial Service Center by calling
1-866-738-1640.
7
Energy-Saving Tips
Power Failure
This appliance is designed for efficiency with
heavy foam insulation. However, there are
things that the user can do to maintain the
appliance in operating condition.
DO NOT open the appliance lid unnecessarily if
the appliance is off for several hours.
If a power failure occurs, pack 7 or 8 pounds
of dry ice into the freezer every 24 hours. Look
in the Yellow Pages under “Dry Ice”, “Dairies”,
or “Ice Cream Manufacturers” for local dry ice
suppliers. Always wear gloves and use caution
when handling dry ice.
• Do not operate the appliance any colder
than necessary to maintain safe, product
storage temperatures.
• Make sure the appliance is located to
prevent direct exposure to sunlight, air
ducts, etc.
• Keep the lid closed except for normal use.
Inspect the door often to see that it selfcloses and the gaskets are in good condition.
• Do not overstock the product in the
cabinet because it will block the normal
air flow.
• Have at least annual inspections by a
qualified service company to see that the
refrigerant charge is correct.
• This appliance operates more efficiently in
a cooler ambient than in a hot ambient.
Try to maintain an ambient below 80ºF
(27ºC) and 65% RH (Relative Humidity)
for maximum efficiency.
Periods of Non-use and Moving Tips
Leave the appliance operating during periods
of non-use of less than 3 weeks.
Long Periods of Non-use
If the appliance will not be used for
several months:
• Remove all food and unplug the power cord.
• Clean and dry the interior thoroughly.
• Leave the appliance door open slightly,
blocking it open if necessary, to prevent
odor and mold growth.
Moving
When moving the appliance , follow these
guidelines to prevent damage:
• Disconnect the power cord plug from the
wall outlet.
• Remove foods, then defrost, and clean
the appliance .
• Secure all loose items such as base panel,
baskets, and shelves by taping them
securely in place to prevent damage.
• In the moving vehicle, secure appliance in
an upright position to prevent movement.
Also, protect outside of appliance with a
blanket or similar item.
8
Before You Call
TROUBLESHOOTING
GUIDE
PROBLEM
Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the
result of defective workmanship or materials in this appliance.
CAUSE
CORRECTION
APPLIANCE OPERATION
Appliance does not run.
Appliance runs too much
or too long.
• Appliance is plugged
into a circuit that has a
ground fault interrupt.
• Temperature control is
in the “OFF” position.
• Appliance may not be
plugged in, or plug
may be loose.
• Fuse blown or tripped
circuit breaker.
• Power outage.
• Use another circuit. If you are
unsure about the outlet, have it
checked by a certified technician.
• See Thermostat Setting.
• Room or outside
weather is hot.
• Appliance has recently
been disconnected for
a period of time.
• Large amount of warm
or hot food have been
stored recently.
• Door is opened too
frequently or kept
open too long.
• Appliance door may
be slightly ajar.
• Temperature control
is set too low.
• It’s normal for the appliance to work
harder under these conditions.
• It takes 24 hours for the appliance
to cool down completely.
• Appliance gaskets are
dirty, worn, cracked
or poorly fitted.
• Ensure plug is tightly pushed
into outlet.
• Check/replace fuse with a 15-amp
time delay fuse. Rest circuit breaker.
• Check house lights. Call local electric company.
• Warm food will cause appliance to
run more until the desired temperature is reached.
• Warm air entering the appliance
causes it to run more. Open the
door less often.
• See “Door Problems”.
• Turn control knob to a warmer
setting. Allow several hours for the
temperature to stabilize.
• Clean or change gasket. Leaks in
the lid seal will cause appliance
to run longer in order to maintain
desired temperature.
Interior appliance temperature is too cold.
• Temperature control
is set too low.
• Turn control knob to a warmer
setting. Allow several hours for the
temperature to stabilize.
Interior appliance temperature is too warm.
• Temperature control
is set too warm.
• Turn control knob to a colder setting. Allow several hours for the
temperature to stabilize.
• Warm air entering the appliance
causes it to run more. Open the
door less often.
• Door is open too frequently or kept open
too long.
Appliance external surface
temperature is warm.
• Large amount of warm
or hot food have been
stored recently.
• Appliance has recently been disconnected
for a period of time.
• Wait until the appliance has had
a chance to reach its selected
temperature.
• Appliance requires 24 hours to cool
down completely.
• The external appliance walls can be
as much as 30°F
warmer than
room temperature.
• This is normal while the compressor
works to transfer heat from inside
the appliance cabinet.
9
Before You Call
PROBLEM
CAUSE
CORRECTION
Louder sound levels whenever appliance is on.
• Modern appliances
have increased storage
capacity and more
stable temperatures.
They require heavyduty compressors.
• This is normal. When the surrounding noise level is low, you may hear
the compressor running while it
cools the interior.
Louder sound levels when
compressor comes on.
• Appliance operates
at higher pressures
during the start of
the ON cycle.
• This is normal. Sound will level off
or disappear as appliance continues
to run.
Popping or cracking sound
when compressor comes on.
• Metal parts undergo expansion and contraction,
as in hot water pipes.
• This is normal. Sound will level off
or disappear as appliance continues
to run.
Bubbling or gurgling sound.
• Refrigerant (used to
cool appliance) is circulating throughout
the system.
• This is normal.
Vibrating or rattling noise.
• Appliance is not level. It
rocks on the floor when
it is moved slightly.
• Floor is uneven or weak.
• Level the appliance by putting
wood or metal shims under part of
the appliance.
• Ensure floor can adequately support
appliance. Level the appliance.
• Re-level appliance or move appliance slightly.
SOUND AND NOISE
• Appliance is touching
the wall.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture forms on inside
appliance walls.
• Weather is hot and
humid, which increases internal rate
of frost build-up.
• This is normal.
• Interior needs to
be cleaned.
• Food with strong odors
are in the appliance.
• Clean interior with sponge, warm
water, and baking soda.
• Cover the food tightly.
• Appliance is not level. It
rocks on the floor when
it is moved slightly.
• Floor is uneven or weak.
• Level the appliance by putting wood
or metal shims under part of the
appliance.
• Ensure floor can adequately support
appliance. Level the appliance by
putting wood or metal shims under
part of the appliance.
• The fluorescent lamp
is burned out.
• No electric current is
reaching the appliance.
• See “Fluorescent Lamp” in Features section.
• See “Appliance does not run”.
ODOR IN APPLIANCE
Odors in appliance.
DOOR PROBLEMS
Door will not close.
LIGHTING PROBLEMS
Fluorescent lamp is not on.
FOR QUESTIONS, COMMENTS OR SERVICE PLEASE CALL
US TOLL FREE AT 1-866-738-1641.
10
IMPORTANT
SAFETY NOTICE
The information provided herein is designed to assist qualified repair
personnel only. Untrained persons should not attempt to make repairs
due to the possibility of electrical shock. Disconnect the power cord
before servicing.
ELECTRICAL CIRCUIT
STAINLESS STEEL DOOR
REFRIGERATOR
STAINLESS STEEL
DOOR FREEZERS
GLASS DOOR
REFRIGERATOR
IMPORTANT
IF ANY GREEN GROUNDING WIRES ARE REMOVED DURING
SERVICING, THEY MUST BE RETURNED TO THEIR ORIGINAL
POSITION AND PROPERLY SECURED.
11
Commercial Appliance Warranty
COMMERCIAL APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove
to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1.
2.
3.
4.
5.
All labor costs on commercial laundry products.
Payment acceptance devices for commercial laundry products.
Products with original serial numbers that have been removed, altered or cannot be readily determined.
Normal wear and tear and gradual deterioration.
Product that has been transferred from its original owner to another party or removed outside the USA
or Canada.
6. Rust on the interior or exterior of the unit.
7. Products purchased “as-is”.
8. Food loss due to any refrigerator or freezer failures.
9. Damage caused at any time during shipment.
10. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
used other than in accordance with the provided instructions.
11. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
12. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc., which are not a part of the appliance when it is shipped from the factory.
13. Service calls to replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles,
or other cosmetic parts.
14. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
15. Damages to the finish of appliance and/or location that are incurred during installation, including but not
limited to floors, cabinets, walls, etc.
16. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
17. Labor costs after ninety (90) days from your original date of purchase incurred for product repair or
replacement as provided herein for appliances operated by a concessionaire or vendor in a trailer or other
motorized vehicle or at varying locations.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE
YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH
AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS
WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty
period should service be required. If service is performed, it is in your best interest to obtain and
keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the
addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by
Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada,
your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change
or add to any obligations under this warranty. Obligations for service and parts under this warranty
must be performed by Electrolux or an authorized service company. Product features or specifications
as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
10200 David Taylor Drive
Charlotte, NC 28262
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
12
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement