DNV31 : Smart Toy® Bear - English

DNV31 : Smart Toy® Bear - English
1
UNITED STATES
1-800-432-5437
Fisher-Price, Inc.
636 Girard Avenue, East Aurora, NY 14052
Hearing-impaired consumers: 1-800-382-7470
CANADA
1-800-432-5437
Mattel Canada Inc.
6155 Freemont Blvd.
Mississauga, Ontario L5R 3W2
© & ™ Mattel and Smart Toy LLC. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, except as noted.
PRINTED IN CHINA
DNV31-0970
1100893774-DOM
Read this manual carefully for important safety
information and operating instructions before
using this toy.
Keep these instructions for future reference,
as they contain important information.
Includes 1 non-replaceable 3,7V rechargeable
(LiPo) battery. Battery Capacity: 2000 mAh.
Requires a USB power brick (not included) and
charger cord (included) to charge the battery.
Charging should only be done by an adult. The
charger cord is not a toy.
Wi-Fi enhances real-time play, but is not required.
Frequency: 2,4 GHz
The parent app works with Apple and Android
smart devices. For a full list of compatible
devices and to download the app, go to:
http://www.smarttoy.com/app
3
1
USB Brick
(not included)
4
2
3
• Smart Toy is ready for play right out of the package. For best
performance, fully charge the battery very soon!
1 Open the fasteners on the back of Smart Toy.
2 Plug the smaller end of the charger cord into
Smart Toy’s socket.
3 Plug the other end of the charger cord into a USB brick
(not included).
4 Plug the USB brick into a standard wall outlet. A fully charged
battery may take up to 5 hours.
4
Green: Full Charge
White: Power ON
Red: Low Battery
Yellow: Charging
• Charge the battery until the power button light
turns green.
It will remain green until you remove the charger cord from
Smart Toy.
• Once the battery is charged, remove the charger cord from the
socket in Smart Toy. Then remove the charger cord from the
USB brick and unplug the USB brick from the wall outlet.
• A fully charged battery should last for about 3½ hours of
continuous play.
5
Power Button
• Smart Toy’s power is completely OFF in package. To turn power
ON, press and hold the power button for up to 10 seconds until
it lights up.
• If Smart Toy is left idle for more than 10 minutes, Smart Toy
enters sleep mode and the power button light turns off. Press
the power button to turn power back ON.
• To turn power completely OFF, press and hold the power button
for up to 10 seconds until the light turns off. When power is
completely OFF, you’ll need to press and hold the power button for
up to 10 seconds to turn power back ON (just like you did when
you took Smart Toy out of the package).
6
4 inches
(10,2 cm)
• Choose a Smart Card for a fun activity.
• Hold the card approximately 4 inches (10,2 cm) from
Smart Toy’s nose. You’ll hear a tone when Smart Toy
recognizes it.
7
Settings
Volume Bar
• Here’s how to adjust the volume.
- After downloading the parent app and connecting the app with
Smart Toy, touch the settings icon in the upper right corner.
- On the next screen, touch and slide the volume bar to turn
volume up or down.
8
• If Smart Toy becomes unresponsive or doesn’t perform as
expected, first try turning power completely OFF (press and hold
the power button for up to 10 seconds until the light turns off)
and then back ON (press and hold the power button for up to 10
seconds). If this doesn’t work, it may be time for a reset. Follow
the instructions below:
- Open the fasteners on the back of Smart Toy.
- Insert a pointed object into the reset hole above the charging
socket. Press until you hear a long tone.
- Remove the pointed object and close the fasteners on the back
of Smart Toy.
- After a reset, all of the stored information received will be
erased. You’ll need to re-connect Smart Toy again with the
parent app and be patient as Smart Toy gets reacquainted with
your child.
9
• Smart Toy listens for responses up to 2 feet (61 cm) away!
• Smart Toy responds when tossed in the air.
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Rechargeable batteries are only to be charged under
adult supervision.
• The supply terminals are not to be short-circuited.
• Dispose of batteries safely.
• Do not dispose of this product in a fire. The batteries inside may
explode or leak.
10
• Protect the environment by not disposing of this product with
household waste (2012/19/EU). Check your local authority for
recycling advice and facilities.
• Smart Toy is surface wash only. Do not immerse.
Adults note: Periodically
examine this battery charger
for damage to the cord,
housing or other parts that
may result in the risk of fire,
electric shock or injury. If the
battery charger is damaged,
do not use it.
11
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
• This device complies with Industry Canada licence-exempt RSS-210. Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation
of the device.
• Le présent appareil est conforme aux CNR-210 d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre son fonctionnement.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising