null  null
Product Brief
Mobile Intel® 910GMLE Express Chipset
Embedded Computing
Mobile Intel® 910GMLE Express Chipset for
Embedded Computing
Product Overview
The Mobile Intel® 910GMLE Express chipset offers an optimized
integrated graphics solution with a 400 MHz front-side bus. The
integrated 32-bit 3D graphics engine, based on Intel® Graphics
Media Accelerator 900 (Intel® GMA 900) architecture, operates at
core speeds of up to 200 MHz. The chipset consists of the Intel®
910GMLE Graphic Memory Controller Hub (GMCH) and the Intel®
I/O Controller Hub 6-M (ICH6-M). It features a low-power design,
is validated with Intel® Celeron® M processors on 90nm process,
and supports up to 2 GB of DDR2 400 MHz system memory.
Intel’s platform architecture delivers the performance and high
scalability required for today’s embedded computing applications. The Intel 910GMLE GMCH and ICH6-M are part of Intel’s
comprehensive validation process that enables fast deployment
of platforms to maximize competitive advantage while minimizing
development risks.
Product Highlights
• Designed, validated, and optimized for Intel Celeron M
processors on 90nm
•400 MHz front-side bus delivers a high-bandwidth connection
between the processor and platform
•Supports dual-channel non-ECC DDR2 400 MHz and singlechannel DDR 333
•New graphics core based on Intel GMA 900
•Long-term system reliability over wide operating conditions
•Direct Media Interface (DMI) chip interconnect can be
implemented x4 or x2 widths, and provides up to 1 GB/s
in each direction in full duplex
•Four USB host controllers provide high-performance peripherals
with 480 Mb/s of bandwidth, while enabling support for up to
eight USB 2.0 ports. This results in a significant increase over
previous integrated one- to four-port hubs at 12 Mb/s
•Four x1 PCI Express ports, fully PCI Express 1.0a-compliant, and
support for full 250 MB/s in each direction
•Intel® High Definition Audio† (Intel® HD Audio) interface for full
surround sound support
•LAN Connect Interface (LCI) provides flexible network solutions
such as 10/100 Mb/s Ethernet and 10/100 Mb/s Ethernet with
LAN manageability
•Integrated Serial ATA host controller supports two ports and
data transfers up to 1.5 MB/s
Product Highlights (continued)
Display
Internal Graphics Features
•Analog display support
•Core frequency
–Display core frequency up to 200 MHz
•Dual display support
–Render core frequency up to 166 MHz
–Independent: different images and native display
timings on each display device
–Dynamic Video Memory Technology (DVMT) 3.0
to dynamically allocate up to 128 MB of system
memory for graphics usage
–Simultaneous: same images and native display
timings on each display device
•SDVO support
–Dual SDVO channels provide support for a wide
array of displays
•Dedicated Local Flat Panel (LFP) LVDS interface
Mobile Intel® 910GMLE Express Chipset for Embedded Computing
Product
Product Code
Package
Intel® 910GMLE Graphics Memory
Controller Hub (GMCH)
QG82910GMLE
1257 µFC-BGA
• 400 MHz front-side bus
• Up to DDR2 400 MHz system memory
• Intel® Graphics Media Accelerator 900
Intel® I/O Controller Hub 6-M (ICH6-M)
NH82801FBM
609 µ-BGA
• Direct connection to GMCH via Direct Media Interface
• Supports four PCI Express root ports
• Two-port Serial ATA controller
• Support for up to eight USB 2.0 ports
• Intel® High Definition Audio† interface
†
Features
Intel® High Definition Audio requires a system with an appropriate Intel chipset and a motherboard with an appropriate codec and the necessary drivers installed.
System sound quality will vary depending on actual implementation, controller, codec, drivers and speakers. For more information about Intel® HD audio, refer to
www.intel.com http://www.intel.com/
Intel Access
Embedded Intel® Architecture Home Page:
Developer’s Site:
Intel in Embedded and Communications:
General Information Hotline:
Intel® Literature Center:
intel.com/design/intarch
intel.com/design
intel.com/go/embedded
(800) 628-8686 or (916) 356-3104 5 a.m. to 5 p.m. PST
(800) 548-4725 7 a.m. to 7 p.m. CST (U.S. and Canada)
International locations please contact your local sales office..
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY
RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications and product
descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future
definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize
a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to
deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the
latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel
literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web Site http://www.intel.com/.
Intel, the Intel logo, Intel. Leap ahead., Intel. Leap ahead. logo, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007 Intel Corporation. All rights reserved.
Printed in USA
0407/KSC/OCG/XX/PDF
Please Recycle
317225-001US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement