1. The liquid or steam must not be directed towards equipment containing electrical

components, such as the interior of ovens.

2. Unplug the appliance after use and before carrying out user maintenance on the

appliance.

3. If the supply cord is damaged, it must be replaced by a Kogan customer service technician in order to avoid a hazard.

4. The appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised to ensure that they

do not play with the appliance.

Disposal

Do not dispose of electrical appliances as unsorted municipal waste - use

separate collection facilities. Contact your local government for information

regarding the collection systems available. If electrical appliances are disposed

of in landfills or dumps, hazardous substances can leak into the groundwater

and get into the food chain, damaging your health and well-being.

2

CONTENTS

IMPORTANT SAFEGUARDS ------------------------------------------------------------3-5

KEY FEATURES ------------------------------------------------------------------------------6

ACCESSORIES -------------------------------------------------------------------------------7

HOW TO ASSEMBLE THE STEAM MOP X5 UNIT --------------------------------8-9

HOW TO USE THE STEAM MOP X5 UNIT ----------------------------------------10-14

HAND-HELD STEAMER -------------------------------------------------------------------15

HOW TO ASSEMBLE THE HAND-HELD STEAMER ----------------------------15-16

HOW TO ASSEMBLE THE OPTIONAL ACCESSORIES -----------------------17-18

HOW TO USE THE HAND-HELD STEAMER --------------------------------------19-20

HOW TO USE THE OPTIONAL ACCESSORIES ---------------------------------21-26

AFTER USE -----------------------------------------------------------------------------------27

CLEANINING AND MAINTENANCE --------------------------------------------------28-30

How to decalcify the Water Tank interior

● Cleaning procedure to remove lime scale

By using scraper

By using cleaning solution

● Cleaning blocked steamer accessories.

TROUBLE SHOOTING GUIDE ----------------------------------------------------------31

3

IMPORTANT SAFEGUARDS

PLEASE READ CAREFULLY. FAILURE TO FOLLOW THE PRODUCT

INSTRUCTIONS WILL VOID YOUR WARRANTY. READ ALL INSTRUCTIONS

BEFORE USING THIS STEAM CLEANER.

As with any electric appliance, basic precautions should always be observed when using this product, including the following:

1. Verify that the main voltage indicated on the product corresponds with the

voltage of your electrical outlet. Rated voltage: 110-120V, 60HZ, 1300W or 220-

240V, 50/60HZ, 1300W

2. To provide continued protection against risk of electric shock, only connect to properly

grounded outlets.

3. This product is designed for domestic use only.

4. Do not use outdoors.

5. Do not leave the STEAM MOP unattended while plugged in. Unplug the electrical

cord when not in use and before servicing.

6. Do not allow the STEAM MOP to be used as a toy. Young children should be

supervised to ensure that they do not play with the appliance.

Close attention is necessary when used near children, pets or plants.

7. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they are under supervision have been instructed how to use the appliance by a person

responsible for their safety.

8. Never direct steam towards people, animals or plants.

9. Do not immerse the STEAM MOP in water or other liquids.

4

10. Do not use with damaged cord or plug. If the STEAM MOP is not working as it

should, has been dropped, damaged, left outdoors, or immersed in water, return it to

Kogan. If the supply cord is damaged, it must be replaced by a Kogan customer service technician to avoid hazard.

11. Do not pull or carry the unit by the cord, use the cord as a handle, close a door on the

cord, or pull the cord around sharp edges or corners. Keep the cord away from heated

surfaces.

12. Never force the plug into an outlet.

13. Do not use telescopic cords or outlets with inadequate electrical current carrying

capacity.

14. Unplug after each use. To safely unplug, grasp the plug and gently pull, do not unplug

by pulling on the cord.

15. Do not handle the plug or the STEAM MOP with wet hands or operate without shoes.

16. Do not insert any objects into openings in the unit. Do not use with any opening of the

product blocked.

17. Do not use the Mop Head without a floor cloth in place.

18. Do not use without water in the Water Tank.

19. Use extra caution when using on stairs.

20. Store your STEAM MOP indoors in a cool, dry place.

21. Keep your work area well-lit.

22. Never put hot water or any other liquids such as aromatic, alcohol-based, or

detergent products into the STEAM MOP Water Tank. This will make the operation

unsafe and damage the unit.

23. Always keep the output for the steam clear. Avoid placing the steam opening on soft

surfaces which may block the flow of steam. Keep the openings free from lint, hair and

other potential obstructions to ensure proper steam flow.

24. Use only as directed in this manual. Use recommended accessories only.

25. Use of attachments not provide or sold by the manufacturer or authorized resellers

may cause fire, electric shock or injury.

26. The liquid or steam should not be directed towards equipment containing electrical

components, such as the interior of ovens.

27. Do not expose to rain.

5

28. Stop using the STEAM MOP if you observe water leakage, and contact the

Kogan Customer support team.

29. Do not use the STEAM MOP in enclosed spaces that are filled with flammable,

explosive or toxic vapor such as paint thinner or oil-based paint.

30. Do not use on leather, wax polished furniture or floors, unsealed hardwood or parquet

floors, synthetic fabrics, velvet or other delicate steam-sensitive materials.

31. Do not use for space heating purposes.

32. Unplug appliance from outlet before servicing.

33. Do not touch hot surfaces.

34. Do not place on or near a hot gas or electric burner, or in a heated oven.

35. To disconnect the unit, turn the power Switch (O/I) to the “OFF” position, turn off the

steam regulator, then remove plug from wall outlet.

36. Do not use appliance for anything other than its intended use.

37. Care should be taken when using appliance due to emission of steam.

38. To avoid circuit overload, do not operate another appliance on the same socket

(circuit) as the steam cleaner.

DANGER OF SCALDING

HOUSEHOLD USE ONLY

Commercial use of this unit voids the manufacturer’s warranty.

SAVE THESE INSTRUCTIONS

\\

6

KEY FEATURES

Curved Handle

Upper Cord Wrap

Power Supply Cord

Telescopic Handle

Handle Lock Button

Power Switch(O/I) with LED ON/OFF Light

Steam Regulator

Water Tank Cap

Water Tank

Main Body

Lock Button (on Main Body)

Mop Head

Front View Back View

ACCESSORIES

Glider Microfiber Cloth Measuring Cup Cleaning Pin

Jet Nozzle Round Brush (Brass) Round Brush (Nylon)

7

OPTIONAL ACCESSORIES

Cloth

Window Cleaning Cloth Garment steaming Cloth

Telescopic Hose Duster Window Cleaning Tool for the Hand-Held Steamer

8

HOW TO ASSEMBLE THE STEAM MOP

Please make sure that the unit is unplugged from an electrical outlet and the Power

Switch (O/I) is in the “OFF”(O) position before assembling the unit or changing the accessories.

Attach the Mop head to the Main Body as follows: insert the Swivel Joint into designated hole in the Main Body until it locks in place with the Lock Button on the Main Body (you will hear a clicking sound).

Make sure that the Mop Head is securely locked into place before usage.

Insert the Stretch Handle into the designated opening in the Main Body until it gets locked in place with the

Telescopic Handle Lock Button.

9

Place the Microfiber Cloth Pad onto the mop head. Fasten the Microfiber Cloth

Pad by pulling the cord while pressing on the toggle.

When using the STEAM MOP on carpet surfaces: Place the Mop Head, with Microfiber Cloth in place, on top of the carpet glider as illustrated. Do not attempt to use the STEAM MOP unit on carpet/rug surfaces without the carpet glider in place.

Never use the carpet glider on surfaces that are prone to scratching.

Never assemble or remove the accessories while the unit is in operation.

10

HOW TO USE THE STEAM MOP

PLEASE READ BEFORE USE

The STEAM MOP is designed to thoroughly clean floor surfaces, such as marble, ceramic, carpet, stone, linoleum and sealed hardwood floors and parquet. Not all floor types are suitable for steam cleaning.

The heat and steam action may remove the wax on surfaces treated with wax. Do not use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an extended period of time. This could cause the wood grain to rise, in addition to other types of damage.

When using on vinyl, linoleum or any other heat sensitive floors, use extra caution.

Too much heat can melt glue within flooring. Use only on laminated flooring that has been laid professionally and without any gaps or cracks that would permit the entry of moisture.

Test the STEAM MOP on a small isolated area of your flooring prior to overall use on any floor surface.

Always check the use and care instructions of your flooring manufacturer or distributor before using the STEAM MOP. When in doubt, please consult a flooring specialist. Only use the carpet glider on carpeting and rugs, Use of the carpet glider on other floor surfaces will cause streaking and possibly scratching.

This product emits steam and creates moisture. Water marks, discoloration or damage to the floor surface can occur if the unit is left operating too long in one place.

11

Make sure that the STEAM MOP is unplugged.

Turn the Water Tank cap counter-clockwise approximately 90° to the “OPEN” position and remove the cap as illustrated in Fig.1 a,b and c.

Hold the Mop at a 45°angle as illustrated in Fig.1d. Add water in the tank up To the MAX level by using the measuring cup. Do not overfill. The maximum tank capacity is

400ML/13.5OZ.

12

Replace the Water Tank cap and turn clockwise approximately

90° to the “CLOSE” position until the cap is tightened securely.

The STEAM MOP uses tap water. However, in areas with hard water, distilled water should be used for better performance.

Make sure the Copper Cone inside the Water Tank is always submerged in water (As illustrated in Fig.1i) while operating

The STEAM MOP.

Never put cleaning detergents or scented products in to the STEAM MOP.

This will make operation unsafe and damage the unit.

2) s :

1Low, 2-Medium, 3-High and 4-Hot Spray

● 1 - Low and 2-Medium Setting: Ideal for clearing

All hard floors, such as linoleum, ceramic,

marble, wood, etc.

● 3 - High Setting: ideally for cleaning carpets and rugs.

● 4 - High Spray Setting: Ideal for cleaning bathroom,

kitchens, window sills, etc.

You can change the Steam Regulator position and change the steam output while operating the STEAM MOP.

13

Once the unit has been fully assembled and filled with water, plug in the Power

Cord to a grounded electrical outlet. Make sure the Power Switch (O/ I) is in the OFF (O) position. Once plugged in, turn the Power Switch (O/ I) to the ON (I) position.

After approximately 30 seconds, the steam regulator will turn on. Adjust the steam according to your requirement. The Mop will start emitting steam.

To stop emitting steam, turns off the steam regulator and then turns the

Power Switch (O/ I) to the OFF (O) position.

If the Power Switch (O/ I) turns to the ON (I) position, and then turn on the steam regulator earlier than 30 seconds, water from the previous use will not be heated and will be forced out by steam.

This may also happened you just turn off the Power Switch to the OFF(O) position and left the steam regulator on from the previous use and the unit was disconnected by unplugging only. Make sure you turn the unit totally OFF after each usage and then disconnect from the electrical outlet so the unit is in the totally OFF when used next time.

Slowly pass over the surface to be cleaned. The absorbent mop cloth picks up the dirt loosened by the steam. Apply steam liberally. Keep a towel handy and wipe away any excess water that may accumulate.

When the STEAM MOP stops emitting steam, simply turn OFF and unplug the appliance, refill the Water Tank and continue cleaning.

14

Never leave the STEAM MOP unattended while plugged in.

For Best Results:

1) Sweep/vacuum floor prior to using the STEAM MOP.

2) The Microfiber Cloth must be clean and dry for use. To

replace the cleaning cloth, proceed as follows:

Let the cleaning cloth cool down, remove cloth from unit,

replace with a new Microfiber Cloth (Optional Item) and

continue use. Select low steam regulator position.

3) To sanitize an area of your floor, leave the STEAM MOP

at high steam setting over the steam area for about

10 seconds, but no longer than 15 seconds.

Do not carry out this procedure on heat and steam sensitive floors.

● Never use steam in the one spot for too long. This can cause floor surface damage.

● Do not put hands or feet under the steam mop. The unit becomes very hot.

● During use, a pulsing noise may be heard indicating that the mop is producing

steam. This noise is normal.

● There may be some minor “spitting” of water mixed with the steam. This is also

normal.

● The force and heat of the steam may adversely affect certain materials. Always

check the suitability of using the steam mop on a surface by carrying out a

preliminary test on a hidden area.

The factory and its affiliated companies assume no liability for personal injury or property damage resulting from the misuse of the STEAM MOP, including the failure to comply with instructions contained in this User Guide or provided by the manufacturer or distributor of the treated surface.

15

HAND-HELD STEAMER

The Hand-Held Steamer is an ideal portable cleaner for use on work surfaces, countertops, sinks, windows, mirrors, tiles and spot cleaning on floors, carpets and rugs.

Use it with the Jet Nozzle, Brass brush or Nylon brush attachments to spray away dirt, grease, mold and more.

HOW TO ASSEMBLE HAND-HELD STEAMER

Make sure that the STEAM MOP is unplugged before assembly.

1) Remove the Power Supply Cord

from the upper cord wrap.

2) Press the Telescopic Handle

lock button and remove the

Telescopic Handle and the Curved

Handle from the Main Body.

3) Press the Lock on Main Body

and remove the Mop Head.

16

4) To attach the Jet Nozzle:

Insert the Jet Nozzle into the

designated hole in the Main

Body unit it locks in place with

the Lock Button on the Main

Body (you will hear a clicking

sound)

Make sure that the Jet

Nozzle is securely locked

in place before usage.

5) Attach either the round nylon brush or round copper brush by screwing onto the threaded end of the Jet Nozzle. To remove either round brush, unscrew from the Jet

Nozzle.

● The round nylon brush is great for cleaning smooth hard surfaces, such as toilets,

sinks, and kitchen counters, etc.

● The round copper brush is great for cleaning coarse or metal surfaces, such as

brick floors, Car wheels, metal doors, and metal frames, etc.

● Both brushes can also effectively clean the grease on pans, stoves and ovens in the

kitchen. They can be used with soap or detergent to clean dirty areas.

Never use the round brass brush on surfaces that are prone to scratching.

17

HOW TO ASSEMBLE THE OPTIONAL ACCESSORIES

HAND-HELD STEAMING HOUSE TOOL

Remove the Mop Head by pressing the Lock

Button on the Main Body or remove the Jet

Nozzle Following the same procedure.

Insert the designated end of the

Telescopic Hose into the designated hole in the Main Unit locks in place with the Lock Button on the Main

Body (you will hear a clicking sound)

Make sure that the Telescopic Hose is securely locked into place before usage.

WINDOW CLEANING TOOL

Loosen up the drawstring on the Coral cloth and install the Coral Cloth onto the designated hooks on the Window Cleaning Tool Frame. Pull up the drawstring to secure the Coral Cloth in place. NOTE: Do not cover the squeegee blade. Make sure to attach the Coral Cloth to all hooks on the Cleaning Tool Frame to prevent slipping or falling from the frame during use.

18

Attach the Window Cleaning Tool to the Telescopic Hose as follows:

Align the lock button on the Telescopic Hose with the designated hole on the Window

Cleaning Tool Frame and then push in the Telescopic Hose until it locks in place.

GARMENT STEAMING TOOL

To use the Window Cleaning tool as Garment Steamer, install the Microfiber Cloth

(Garment Steaming cloth) over the Window Cleaning/Garment Steamer Tool.

Attach the Window Cleaning/Garment

Steamer Tool to the Telescopic Hose as

follows: Align the lock button on

the Telescopic Hose with the designed

hole on the Window Cleaning/Garment

Steaming Tool Frame and then push the

Telescopic Hose until it locks in place.

DUSTER

Install the cleaning Coral Cloth onto the Duster Frame.

19

Attach the Duster Frame to the

Telescopic Hose as follows: Align the lock button on the Telescopic Hose with the designated hole on the Duster

Frame. Then push in the Telescopic

House until it locks into place.

Align the lock button on the Telescopic Hose

HOW TO USE HAND-HELD STEAMER

Make sure that the STEAM MOP is unplugged.

Fill the Water Tank with water. Please refer to the

“HOW TO USE THE STEAM MOP” section in this manual. Attach either the round nylon brush or the round copper brush as explained in the “HOW to assemble Hand-Held Steamer” section in this manual.

1) Select one of the following Steam Regulator

positions: 1- Low, 2- Medium, 3- High or

4- Hot Spray. You can change the Steam

Regulator position and the steam output while

operating the STEAM MOP.

2) Once the unit has been fully assembled and filled with water, plug in the

power cord to a grounded electrical outlet. Power Switch (O/ I) is in

the OFF (O) position, turns the Power Switch (O/ I) to the ON(I) position.

After approximately 30 seconds, turn on the steam regulator and adjust

the steam according to your requirement. The Mop will start emitting steam.

To stop emitting steam, turn off the steam regulator and then turn the

Power Switch (O/ I) to the OFF (O) position.

20

Note: be sure to turn the unit totally OFF after each usage and then disconnect from the electrical outlet so the unit is in the totally OFF when used next time.

3) Slowly pass over surfaces to be cleaned. Apply steam liberally. Keep a towel handy

and wipe away any excess water that may accumulate.

4) When the Hand-Held Steamer stops emitting steam, simply turn OFF and unplug

the unit, refill the Water Tank and continue cleaning.

To sanitize your work surfaces, kitchen counter tops, sinks, bathrooms, etc. use the

Hand-Held Steamer over the same area for about 15 seconds.

Do not carry out this procedure on heat and steam sensitive surfaces. The force and heat of the steam may adversely affect certain materials. Always check the suitability of using the steamer on a particular surface by first testing a hidden area.

Never direct steam towards people, animals or plants.

● Do not use the steam to clean frozen windows.

● Be careful when using the steamer on glass, as it may break.

● Do not use steamer on leather, wax polished furniture or waxed floors, synthetic

fabrics, velvet or other delicate steam-sensitive materials.

The factory and its affiliated companies assume no liability for personal injury or property damage resulting from the misuse of the STEAM MOP, including the failure to comply with instructions contained in this User Guide or provided by the manufacturer or distributor of the treated surface.

21

HOW TO USE OPTIONAL ACCCESSORIES

WINDOW CLEANING TOOL

Make sure the STEAM MOP is unplugged.

1) Fill the Water Tank with water. Please refer to the “HOW TO USE THE STEAM

MOP” section in this manual

2) Install the Coral Cloth onto the Window Cleaning Tool and attach the Window

Cleaning Tool to the Telescopic Hose as described in the “How to Assemble the

Optional Accessories” section in this manual.

3) Follow Steps 2-3 described in the” How

to use the Hand-held Steamer” section in this

manual.

4) Hold the Hand-held Steamer in on hand and

grasp the handle grip on the Telescopic Hose

with the other hand as illustrated.

5) Slowly pass over glass(or other similar) surface

to be cleaned. Apply steam liberally. The

absorbent Coral Cloth picks up the dirt

loosened by the steam, and the squeegee

blade removes any remaining trails of water.

Keep a towel handy and wipe away any

excess water that may accumulate.

Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a steam leak.

DANGER OF SCALDING

Do not touch the Window Cleaning Tool/Coral Cloth during usage, as these components can get extremely hot.

22

Keep the Telescopic Hose away from your body and avoid touching the hose, as it can get hot.

6) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the

unit, refill the Water Tank and continue cleaning.

7) Once you finish cleaning, allow the Coral Cloth to cool down and carefully remove it

from the Window Cleaning Tool, as the cleaning cloth could still be hot.

● Do not use the steam to clean frozen windows.

● Be careful when using the steamer on glass, as it may break.

GARMENT STEAMER

Make sure that the STEAM MOP is unplugged.

1) Fill the Water Tank with water. Please refer to the “HOW TO USE THE STEAM

MOP section in this manual.

2) Install the Garment Steamer Cloth onto the Window Cleaning/Garment

Steaming Tool and attach the Window Cleaning/Garment Steaming Tool to the

Telescopic Hose as described in the “How to Assemble the Optional Accessories” section in this manual.

3) Select one of the following Steam Regulator Positions: 1-Low or 2-Medium

Do not use 3-High and 4-Hot Spray steam settings when using the

Garment Steamer. When using the Garment Steamer. You can change the Steam

Regulator position and steam output while operating the STEAM MOP X 5.

4) Follow Step 3 described in the “How to Use the Hand-Held Steamer” section in this manual.

5) To steam a garment, place item of clothing on the hanger and steam the garment directly.

6) Hold the Hand-Held Steamer in one hand and grasp the handle grip on the Telescopic

Hose with the other hand as illustrated.

Slowly slide the Garment Steamer Head

vertically, from the top to the bottom of the

garment. You may also reverse this motion

and steam from the bottom to the top.

Curtains and draperies can be steamed

while they are hanging.

23

Please refer to label on item of clothing to check if garment can be steamed.

Some fabrics like leather, suede, and velvet may not be suitable for steaming.

If you are not sure then steam a small part of the inside of the garment to test that it does not damage the fabric before steaming the entire garment or fabric.

CAUTION: Pulling on the Telescopic Hose with excessive force will damage the hose, possibly resulting in a steam leak.

DANGER OF SCALDING

Do not touch the Garment Steamer Tool/Cloth during usage, as these components can get extremely hot. Keep the Telescopic Hose away from your body and avoid touching the hose as it can get hot.

7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit, refill the Water Tank and continue cleaning.

8) Once you finish cleaning allow the Garment Steamer Cloth to cool down and carefully remove it from the Window Cleaning Tool, as the Garment Steamer

Cloth could still be hot.

DUSTER

Make sure that the STEAM MOP IS UNPLUGGED.

1) Fill the Water Tank with water. Please refer to

the “HOW TO USE THE STEAM MOP” section

in the manual.

2) Install the Coral Cloth onto the Duster frame and

attached the Duster to the extension Hose as

described in the “How To Assemble the Optional

Accessories” section in this manual.

3) Select one of the following Steam Regulator position: 1-Low,2-Medium or 3-High.

Do not use 4-Hot Spray steam setting when using the Duster. You can change the

Steam Regulator position and change the steam output while operating the STEAM

MOP.

4) Follow Step 3, described in the “How To Use the Hand-Held Steamer” section in

this manual.

24

5) Hold the Hand-Held Steamer in one hand and grasp the handle grip on the

Telescopic Hose with the other hand as illustrated above.

6) Slowly pass over surface to be cleaned. The absorbent Coral Cloth picks up the dirt

loosened by the steam. Keep a towel handy and wipe away any excess water that

may accumulate.

Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a steam leak.

DANGER OF SCALDING

Do not touch the Duster/Coral Cloth during usage, as these components can get extremely hot. Keep the telescopic hose away from your body and avoid touching the hose, as it can get hot.

7 ） When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit, refill the Water Tank and continue cleaning.

8) Once you finish cleaning allow the Duster Coral Cloth to cool down and carefully remove it from the Duster frame, as the Coral Cloth could still be hot.

GARMENT STEAMING CLOTH

Make sure that the STEAM MOP is unplugged.

1) Fill the Water Tank with water. Please refer to

the “HOW TO USE THE STEAM Mop” section

in the manual.

2) Install the Garment Steaming Cloth onto the Window

Clearing/Garment Steaming Tool and attach the

Window Clearing/Garment Steaming Tool to

the Telescopic Hose as described in the “How To

Assemble the optional Accessories” section in

this manual.

3) Select one of the following Steam Regulator position: 1-Low or 2- Medium. Do not

use 3-High and 4 –Hot Spray steam settings when using the Garment Steamer. You

can change the Steam Regulator position and the steam out put while operating the

STEAM MOP.

25

4) Follow Step 3, as described in the “How to Assemble the Optional Accessories”

section in this manual.

5) Hole the hand-held Steamer in one hand and grasp the handle grip on the

Telescopic Hose with the other hand as illustrated above.

6) Slowly pass over surface to be cleaned. The absorbent Lint Cloth picks up the

dirt/hair loosened by the steam. Do not use on animals.

Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a steam leak.

DANGER OF SCALDING

Do not touch the Window Cleaning/Garment Steamer Tool or the Garment

Steaming Cloth during usage, as these components can get extremely hot.

Keep the Telescopic Hose away from your body and avoid touching the hose, as it can get hot.

7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the

unit, refill the Water Tank and continue cleaning.

8) Once you finish cleaning, allow the Lint Cloth to cool and carefully remove it from

the Window Cleaning.

Coral Cloth for Mop Head

Attach the triangle shaped Coral Cloth to the Mop Head following the same instructions as provided for the Microfiber Cloth with Hook and Loop tape in the “HOW TO

ASSEMBLE THE STEAM MOP” section in this manual.

The Coral Cloth is soft and durable with hundreds of super absorbing fringes, ideal for your sealed headword, ceramic and other types of flooring.

The factory and its affiliated companies assume no liability for personal injury or property damage resulting from the misuse of the STEAM MOP, including the failure to comply with the instructions contained in this User Guide or provided by the manufacturer or distributor of the treated surface.

26

AFTER USE

1) Unplug Power Cord from outlet.

2) Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from mop

Head, as cleaning cloth could still be hot.

3) Any water remaining in the Water Tank should be emptied prior to appliance

storage. Always empty the Water Tank at the end after each use.

4) Let any water (that may remain as a product of condensation) drain from the steam

opening prior to storing the appliance.

5) Wrap Power Cord around Upper and Lower Cord Wrap.

6) Wipe all surfaces of the STEAM MOP with a soft cloth.

7) Please store the unit in a cool and dry place when not in use. Do not leave it

exposed to sunlight or rain.

8) Upright storage of the STEAM MOP with a wet Mop Pad/Cloth may result in the

formation of white marks on your floor. To remove the white marks, clean the

specific area with vinegar. Make sure to remove the Mop Pad/Cloth before storage.

27

CLEANING AND MAINTENANCE

BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET

WHEN PERFORMING CLEANING

Drain the remaining water in the tank and clean the tank after every use. Please use detergent to clean the accessories (Jet Nozzle and Rough Brush) when they are dirty, then wash with clean water and air dry.

How to decalcify the Water Tank interior:

To clean calcium deposits that build up inside the Water Tank, add one or two tablespoons of white vinegar to a full Water Tank, close the Water Tank cap and shake the contents. DO NOT TURN THE STEAMER ON.

Let the unit sit for a few hours. Then, empty the Water Tank and refill with clean water and empty until it rinses clear.

DO NOT IMMERSE THE STEAM MOP IN WATER.

● Cleaning procedure to remove lime scale

If your STEAM MOP begins to produce steam more slowly than usual or stops producing steam, you may need to remove lime scale. Lime scale can develop over time on the metal parts and greatly affect mop performance. It is necessary to remove the scale on a regular basis every 25-50 times you use a full tank of water or at least once a month, especially in areas with hard water. The frequency of lime scale removal depends upon the hardness of your tap water and how often you use the steam mop.

The STEAM MOP uses tap water. However, in areas with hard water,

Distilled water should be used for better performance.

To remove lime scale from the STEAM MOP, please follow these procedures:

28

By using Scraper

1) Make sure that the STEAM MOP is disconnected from the power supply before maintenance.

2) Use the cleaning pin to remove scale deposits from the small hole of the stream

outlet in the Main Body by swirling and pushing

the pin up and down you will clean the steam

outlet. Always ensure that all scale debris has

been removed from the steam outlet before

reassembling. Continue swirling Cleaning Pin

until no further debris is evident.

By using cleaning solution

1) Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.

2) Secure and position the unit to ensure steam released is slimed away from the floor or surrounding objects and surfaces. Plug the unit in, turn the unit ON by pressing the Power Switch (O/I) and allow the unit to produce steam until the vinegar/water solution is used up.

3) Repeat the above procedures as many times as necessary until a normal steam flow rate is achieved.

4) Fill the Water Tank with fresh water and rinse out.

5) Fill the Water Tank with fresh water, attach to the unit and release steam through the system until the Water Tank is empty.

Do not leave the steamer unattended during the lime scale removal process and /or while in use.

Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no debris in the system.

29

DANGER OF SCALDING

● Cleaning blocked steamer accessories.

Due to the high mineral content of water in some areas, you may notice that less steam comes out from the Hand-Held Steamer accessories. This may be caused by calcium build-up inside the tip of the nozzle.

To clean calcium build-up, we recommend using a spray lubricant. Spray a small burst or two of the lubricant inside the tip of the Jet Nozzle. After spraying lubricant inside the component, fill the steamer with water according to the directions and run a continuous jet of steam through the affected accessory to several minutes to remove the deposit. Once the steam pathway is clean, aim the steamer at a neutral surface or a cleaning cloth to make sure no debris is emitted.

WE RECOMMEND PREFORMING THIS PROCEDURE IN A PROTECTED AND

WELL-VENTILATED AREA.

Microfiber cloth care:

● Machine wash at 60 ℃(140℉)

● Do not bleach

● Do not use fabric softener

30

TROUBLESHOOTING GUIDE

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, UNPLUG

APPLIANCE FROM OUTLET BEFORE SERVICING.

Problem

The unit does not power on

Reduced steam or no steam

Steam escapes from connections

The cleaning cloth gets wet

Possible Cause

The unit is not plugged in.

- Water Tank empty

- Blocked Steam Nozzle

- Lime Scale

- Attachment is not connected

properly.

- There's debris/obstructions

at the connection points.

Exposure to moisture, saturated with liquid

Solution

Make sure the unit is plugged into a proper outlet and the switch is ON(I).

- Fill Water Tank

- Remove the mop head and

clean the nozzle

- Follow cleaning procedure in

this manual

- Turn the unit OFF, allow it to

cool down, disconnect the

accessories and reattach

them properly.

- Remove the accessory,

check and clean the

connection

Remove the wet cloth and replace with a new Cleaning cloth (optional item). Or, wring out and reattach.

31