SuitCase® 12RC - Miller Welding

SuitCase® 12RC - Miller Welding
Issued April 2017 • Index No. M/6.5
SuitCase 12RC
®
Quick
Specs
Wire Feeder with
Remote Control
Industrial Applications
Processes
Input Power 24 VAC, 10 A
Shipbuilding
Construction
Heavy manufacturing
Rental
MIG (GMAW)
Flux-cored (FCAW)
Pulsed MIG (GMAW-P)
Net Weight 31 lb. (14.1 kg)
Portable wire feeding
with standard remote
voltage control.
DURABLE
BUILT
TO LAST
Requires control cord —
sold separately.
Built to last in harsh
industrial environments
Ergonomically sound,
lightweight, modular design
is well balanced, and allows
improved mobility and ease of
carrying to remote welding sites.
Plastic case design and
double-filtered gas valve
ensure SuitCase withstands
the harshest industrial
environments.
Totally enclosed, impactresistant, flame-retardant case
provides strength and durability,
and protects components and
welding wire from moisture,
dust and other contaminants.
Drive roll accessibility makes
it easy to install wire, adjust
tension and change drive rolls.
Wire feeder is warranted for three years, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada MillerWelds.com
An ITW Welding Company
1635 West Spencer Street
P.O. Box 1079
Appleton, WI 54912-1079 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
SuitCase 12RC Features
®
Trigger hold is located on front panel. Jog
and purge are located on inner control panel.
Digital meters with SunVision™ technology
can display voltage, wire feed speed, and
also amperage if desired. Meters can be
seen clearly even in direct sunlight.
Ultra-low drag inlet guide pins
make loading the wire easy and do
not deform the wire on the way into
the drive rolls. Simply thread the
wire through the pins and into
drive rolls. There are two ways to
advance the wire through the drive
roll and into the gun. Either open
the pressure arm and thread the
wire into the grooves in the drive
roll and on into the gun inlet or
place the wire between the pins and
use the jog switch to advance the
wire through the drive roll.
Scaled wire pressure knob provides
easy adjustment and consistent
pressure on the drive rolls and wire.
Wire drive and motor assembly is
specifically designed for mobile
welding applications to provide
smooth and consistent wire delivery.
Improved motor torque and drive roll
system are designed to feed smalldiameter solid wire (.023 inch) to
large-diameter cored wire (5/64 inch).
2
Polypropylene case with built-in slide
rails and the ability to open the door to
change wire with feeder in vertical position.
Gun locking tab works with guns having
corresponding locking grooves to prevent gun
from being pulled out if the feeder is dragged
by the gun.
Gas inlet recessed into back of case is
protected from incidental contact by the weld
cable, ensuring consistent and contaminantfree shielding gas delivery to the gun.
Double-filtered gas valve helps keep dirt
from clogging and affecting gas flow.
Specifications (Subject to change without notice.)
Input Power
24 VAC,
10 A,
50/60 Hz
Welding Power
Source Type
Input Welding
Circuit Rating
Constant
voltage (CV)
425 A at
50–700 ipm
60% duty cycle (1.3–17.8 m/min.)
Wire Speed
(Use with CV, DC
power sources.)
Wire Type and Diameter Capacity
Max. Spool
Size Capacity
Solid wire: .023–.052 in. (0.6–1.4 mm)
Flux-cored: .030–5/64 in. (0.8–2.0 mm)
12 in. (305 mm),
45 lb. (20 kg)
Dimensions
H: 15.5 in. (394 mm)
W: 9 in. (229 mm)
D: 21 in. (533 mm)
Net
Weight
31 lb.
(14.1 kg)
Control Panel
1
3
4
5
2
6
1.
2.
3.
4.
5.
6.
Power Control Switch
Voltage Control
Trigger Hold Switch
Meter
Voltage/Wire Feed Speed Switch
Wire Speed Control
Note: Jog and purge switches are located
on inner control panel.
Drive Rolls (Two Required. Order from Miller Service Parts.)
Select drive rolls from chart below according to type and wire size being used. Wire inlet guide comes installed on this wire feeder.
Wire Size
.023/.025 in. (0.6 mm)
.030 in. (0.8 mm)
.035 in. (0.9 mm)
.040 in. (1.0 mm)
.045 in. (1.1/1.2 mm)
.052 in. (1.3/1.4 mm)
1/16 in. (1.6 mm)
.068/.072 in. (1.8 mm)
5/64 in. (2.0 mm)
“V” groove
for hard wire
087130
053695
053700
053696
053697
053698
053699
—
—
“U” groove for
soft wire or
soft-shelled
cored wires
—
—
072000
—
053701
053702
053706
—
053704
“V” knurled for
hard-shelled
cored wires
—
—
132958
—
132957
132956
132955
132959
132960
“U” cogged
for extremely soft
wire or soft-shelled
cored wires (i.e.,
hard facing types)
—
—
—
—
083489
083490
053708
—
053710
3
Ordering Information
Equipment and Options
SuitCase 12RC
®
Stock No.
Description
Qty.
™
951580
With meters and Bernard BTB Gun 300 A
951599
With meters, trigger hold, lift eye and Bernard™ BTB Gun 300 A.
Preflow, postflow and burnback values are set with DIP switches
Flowmeter Kit
300343
Inline Filter
195189
Spool Adapter
047141
For 14 lb. spools
International Gun Adapter
164902
Adapter is required to connect SuitCase® to a Euro-style gun
Control Cords
(One required.)
242208025
242208050
242208080
25 ft. (7.6 m)
50 ft. (15.2 m)
80 ft. (24.3 m)
Lift Eye
300583
Used for suspending feeder over work area
Accessories
Guns
Bernard™ Dura-Flux™ (FCAW)
See Bernard literature SP-BTB
Bernard™ Q300 (GMAW)
See Bernard literature SP-DF
Power Sources
XMT® 350 Series and 450 Series
See literature DC/18.93 and DC/18.94
Dimension Series
See literature DC/19.2
Gold Star® Series
See literature DC/8.1
Big Blue® 400 Pro and 400 PipePro®
See literature ED/5.7 and ED/5.8
™
®
Big Blue 500 Pro
See literature ED/11.0
Big Blue® 600 Series
See literature ED/11.5
Big Blue® 800 Series
See literature ED/14.0
Bobcat™ Series
See literature ED/4.4
Trailblazer® Series
See literature ED/4.75 and ED/4.78
Consumables
Drive Rolls
Wire
Date:
Distributed by:
© 2017 Miller Electric Mfg. Co.
Total Quoted Price:
Price
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement