Panasonic KXTG5664 Operating instructions

Panasonic KXTG5664 Operating instructions
TG5664_QG(e).fm Page 1 Friday, February 3, 2006 2:20 PM
Model No. KX-TG5664
Quick Guide
Setting up
Base unit
CHARGE 7 HOURS
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Press plug
firmly.
OR
Hook
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
Noise filter (For DSL Service users)
“Click”
Handset
Confirm CHARGE
indicator is on.
B
A
Confirm
“Charging” is
displayed.
Charger
5
Charging
(120 V AC, 60 Hz)
For further information, visit http://www.panasonic.com/phonehelp
PQQW15341ZA
DM0306SY0
TG5664_QG(e).fm Page 2 Friday, February 3, 2006 2:20 PM
Operating tips
{ }: shows button names.
Using the navigator key
After pressing {MENU} or {Phonebook}, the
handset navigator key can be used. Press {^}, {V},
{<}, or {>} to navigate through menus and to select
items shown on the display.
{^}
{>}
{<}
{V}
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Handset soft keys
The handset features 2 soft keys. By pressing a soft
key, you can select the feature shown directly above
it on the display.
{Select}, {Save}, {OK} and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
5
Rcvd
Kcalls
Phone
book L
Date and time (Handset)
1 {MENU} i {4}
2 Enter the current month, day, and year by selecting 2 digits for each.
3 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.
4 Press {AM/PM} to select “AM” or “PM”. i {Save} i {OFF}
Adding items to the phonebook (Handset)
1 {Phonebook} i {Add}
2 Enter the name (max. 16 characters). i {Next}
3 Enter the phone number (max. 32 digits). i {Next} i {Save} i {OFF}
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
–2–
TG5664_QG(e).fm Page 3 Friday, February 3, 2006 2:20 PM
Basic operation (Handset)
Feature
Operation
Adjusting the receiver/
speaker volume
Press {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
Press {^} or {V} repeatedly to select the desired item. i
{C}
Ringer volume
1 {MENU} i {1}{1}
2 Select the desired volume. i {Save}
Answering call-waiting
call (2nd call)
Press {CALL WAIT} when you hear call waiting tone.
Basic operation (Base unit)
Feature
Operation
Adjusting the speaker
volume
Press {^} or {V} repeatedly while talking.
Ringer volume
Press {^} or {V} repeatedly to select the desired volume.
L To turn the ringer off, press and hold {V} until the unit
beeps 2 times.
Answering call-waiting
call (2nd call)
Press {CALL WAIT} when you hear call waiting tone.
For further information, visit http://www.panasonic.com/phonehelp
–3–
TG5664_QG(e).fm Page 4 Friday, February 3, 2006 2:20 PM
Answering system (Base unit)
Feature
Operation
Auto answer on/off
{ANSWER ON}
Recording your greeting
message
(max. 2 minutes)
1 {GREETING REC}
2 Within 10 seconds, press {GREETING REC} again.
3 Speak clearly about 20 cm (8 inches) away from the MIC.
4 To stop recording, press {STOP}.
Listening to new
messages
When the MESSAGE indicator flashes on the base unit,
press {MESSAGE}.
Listening to old
messages
When the MESSAGE indicator does not flash on the base
unit, press {MESSAGE}.
Erasing a message
Press {ERASE} during playback.
Using the answering
system remotely
1 Dial your phone number from a touch tone phone.
2 After the greeting message starts, enter your remote
code. (Default remote code is “11”.)
L The unit plays back new messages.
L After playing back new messages, the voice guidance starts.
3 Follow the voice guidance as necessary.
Frequently asked questions
Question
Cause/solution
How can I increase
handset volume level?
L Press navigator key {^} repeatedly while talking.
Why is the conversation
noisy or cutting off?
L Try to relocate the base unit so that distance from location
to use the handset will be minimized.
L Send your unit to service, if your unit has same problem
when the handset is next to the base unit.
Can I keep battery
charging all the time?
L You can leave handset on the base unit or charger
anytime. There is no damage to the battery.
How can I answer a callwaiting call (2nd call)?
L Press {CALL WAIT} when you hear call-waiting tone.
For further information, visit http://www.panasonic.com/phonehelp
–4–
TG5664_QG(e).fm Page 5 Friday, February 3, 2006 2:20 PM
Quick troubleshooting
1 Handset shows:
“No link to base. Move closer to base, try again.”
Place the handset on the base unit,
then check if CHARGE indicator is on.
CHARGE indicator is OFF.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
CHARGE indicator
is still OFF.
OR
CHARGE indicator
is ON.
CHARGE
indicator is ON,
now.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
Re-registration
failed.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try reregistration as explained later in this guide.
Re-registration
failed.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
–5–
TG5664_QG(e).fm Page 6 Friday, February 3, 2006 2:20 PM
Quick troubleshooting
2 No dial tone is heard from handset.
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
“Talk”.
No link to base.
Move closer to
base, try again.
{C}
“No link to base.
Move closer to
base, try again.”
is displayed.
Talk
KSlow
“Talk” is
displayed.
MuteL
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
{s}
No dial tone
Try remedy for 1
on previous page.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Dial tone is heard.
Your telephone may
need service when
only back speaker
provides a dial tone.
Still no dial tone
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
–6–
TG5664_QG(e).fm Page 7 Friday, February 3, 2006 2:20 PM
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset is
not registered to the base unit, register the handset.
Handset
Press {MENU}, then press {0}{0}.
Refer to manual
to prepare base.
Then press
OKL
{MENU}
Base unit
Press and hold {INTERCOM} until the CHARGE
indicator flashes, then press {1}, {2}, {3}, or
{4}.
L
Complete next step within 1 minute.
Handset
Press {OK}.
Refer to manual
to prepare base.
Then press
OKL
{OK}
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
–7–
TG5664_QG(e).fm Page 8 Friday, February 3, 2006 2:20 PM
IMPORTANT!
If your product is not
working properly. . .
1 Read this Quick Guide or Operating
Instructions
L If you lost Operating Instructions, you can download at
http://www.panasonic.com/phonehelp
2 Visit our website:
http://www.panasonic.com/phonehelp
L FAQs and troubleshooting hints are available.
3 Contact us via the web at:
http://www.panasonic.com/contactinfo
4 Call us at:
1-800-211-PANA (1-800-211-7262)
L Monday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit: http://www.panasonic.com/batterystore
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement