Hampton Bay CF0112-78HD Solar Acorn Remington Bronze Integrated LED Deck Light (2-Pack) Instructions

Add to my manuals
7 Pages

advertisement

Hampton Bay CF0112-78HD Solar Acorn Remington Bronze Integrated LED Deck Light (2-Pack) Instructions | Manualzz

USE AND CARE GUIDE

ACORN SOLAR POST CAP LIGHT 2 PACK

Item #1000 020 912

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service

8 a.m.-5 p.m., Central, Monday-Friday

1-855-HD-HAMPTON

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this solar post light.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

What is Covered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Information

Do not dispose of lithium phosphate batteries in municipal waste stream or by fire as batteries may explode. Do not open, short circuit, or mutilate batteries. Dispose of batteries in accordance with Local, State, and Federal regulations.

Contains no toxic metals. Do not mix old and new batteries.

Do not mix alkaline, standard (Carbon-Zinc), or rechargeable

(Nickel Cadmium or Nickel Metal Hydride) batteries with

Lithium Iron Phosphate (lithium phosphate) batteries.

Warranty

WHAT IS COVERED

The manufacturer warrants this fixture to be free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 1 year from the date of purchase. This warranty covers all component parts and extends only to the replacement of a defective fixture or components; it does not cover failure due to improper installation, misuse, mishandling, or damage incurred in transit.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Pre-Installation

TOOLS REQUIRED

Phillips screwdriver

HARDWARE INCLUDED

Part

AA

BB

CC

Description

Short Screws

Long Screws

Plastic Anchors

AA BB

Quantity

4

4

4

CC

2

Pre-Installation (continued)

PACKAGE CONTENTS

A

B

C

D

E

Part

A

B

C

D

E

Description

Light Head

Lens

Shade

Post Mount

Rail Mount Adapter

Quantity

2

2

2

2

2

3 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly

1

Assembling the light

□ Align the tabs on the lens (B) with the ledges on the light

head (A) and turn the light head (A) clockwise until tabs

are secure under ledges.

□ Align the tabs on the shade (C) with the ledges on the

light head (A) and turn the light head (A) clockwise until

tabs are secure under ledges.

2

Mounting on a post

□ Firmly slide the light assembly (A, B and C) on top of the

post mount (D) until it is flush.

□ Attach the light and post mount assembly (A, B, C and D)

to the selected post by aligning the post with the opening

in the bottom of the post mount (D). Set the light onto

the post.

NOTE: Some parts may come pre-assembled.

NOTE: Light head should fit on a common 4 x 4 inch post. Actual post measurement: 3-5/8 x 3-5/8 in.

□ Use a pen or pencil to trace the two holes located on

the sides of the post mount (D) onto the post. Remove

the light assembly.

□ Pre-drill pilot holes onto the post where your pen/pencil

marks were made.

□ Slide the light and post mount assembly (A, B, C and D)

onto the post. Insert the screws (AA). Tighten until secure.

A

C

D

AA

4

Assembly (continued)

3

Mounting to a rail

□ Align the rail mount adapter (E) onto the selected rail.

□ Use a pen or pencil to trace the two holes onto the rail

and remove the rail mount adapter (E).

□ Pre-drill pilot holes onto the rail where your pen/pencil

marks were made.

□ Insert plastic anchors (CC).

□ Insert screws (BB) through the rail mount adapter (E)

and the pilot holes in the rail. Tighten until secure.

□ Firmly slide the light and post mount assembly

(A, B, C and D) on top of the rail mount adapter (E) until

it is flush.

□ Insert screws (AA) through the holes on the sides of the

post mount (D) and rail mount adapter (E). Tighten

until secure.

NOTE: If post is wooden, you will not need to insert plastic anchors.

D

BB

CC

AA

E

Operation

1

First time use

□ Remove the light head (A) from the shade (C).

□ Remove the pull tab (1) in between the battery and its

connector.

□ The solar light needs to charge in full sunlight for 8 - 12

hours to allow the rechargeable battery to reach

maximum capacity. For optimum performance, allow

the battery to charge in full sunlight.

2

Replacing the battery

□ Remove the light head (A) from the shade (C).

□ Remove the lens (B) from the light head (A).

□ Press the release tab. Pull up and remove the battery

cover (F).

□ Remove the old battery and replace with a new lithium

phosphate 3.2V, 600 (14500) mAh rechargeable battery.

□ Return the battery cover (F).

□ Return the lens (B) to the light head (A).

□ Return the light head (A) to the shade (C).

1

B

F

A

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Troubleshooting

Problem

The light does not come on.

Possible Cause

□ There is plastic over the solar cell.

□ The pull tab was not removed.

□ The batteries are dirty.

□ The batteries are dead.

Solution

□ Make sure there is no plastic over the

solar cell.

□ Make sure that the pull tab is removed.

□ Remove batteries, wipe both ends with

a clean dry cloth, and replace batteries.

□ Test batteries by replacing with alkaline

batteries and placing the light in a dark

room. DO NOT leave the alkaline

batteries in the light. Replace with new

batteries if needed.

FAQ

What type of maintenance should I perform on the lights?

Although it is not mandatory, some people choose to periodically clean their lights. This can be done with a nonabrasive soap, sponge and water. You may also need to replace the batteries.

Will I need to / can I replace the LED in my solar light?

The solar lights have LEDs (Light Emitting Diodes) because of their long lifetime and low power consumption. The LED is not replaceable.

How long will my batteries / lights last?

Lithium batteries should last for 1500 daily cycles and the LED bulbs should last 20 years.

6

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service

8 a.m.-5 p.m., Central, Monday-Friday

1-855-HD-HAMPTON

HAMPTONBAY.COM

Retain this manual for future use.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement