Ford 2014 Fiesta Owner’s Manual

2014 FIESTA Owner’s Manual
EE8J 19A321 AA
|
2014 FIESTA Owner’s Manual
fordowner.com
ford.ca
March 2013
|
First Printing
|
Owner’s Manual
|
Fiesta
|
Litho in U.S.A.
The information contained in this publication was correct at the time of going to print. In the interest of
continuous development, we reserve the right to change specifications, design or equipment at any time
without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a
retrieval system or translated into any language in any form by any means without our written permission.
Errors and omissions excepted.
© Ford Motor Company 2013
All rights reserved.
Part Number: 20130226160443
Table of Contents
Knee Airbag.....................................................40
Side Curtain Airbags.....................................40
Crash Sensors and Airbag Indicator.........41
Airbag Disposal...............................................42
Introduction
About This Manual...........................................7
Symbols Glossary.............................................7
Replacement Parts
Recommendation........................................9
Mobile Communications
Equipment.....................................................10
Data Recording................................................10
California Proposition 65.............................12
Perchlorate.........................................................12
Ford Credit.........................................................12
Special Notices................................................12
Export Unique Options..................................12
Keys and Remote Controls
General Information on Radio
Frequencies..................................................43
Remote Control..............................................43
Replacing a Lost Key or Remote
Control............................................................47
MyKey™
Principle of Operation..................................48
Creating a MyKey...........................................49
Clearing All MyKeys.......................................50
Checking MyKey System Status..............50
Using MyKey With Remote Start
Systems.........................................................50
MyKey Troubleshooting...............................52
Child Safety
General Information.......................................14
Installing Child Seats.....................................15
Child Seat Positioning...................................21
Booster Seats..................................................23
Child Safety Locks..........................................25
Locks
Safety Belts
Locking and Unlocking.................................54
Manual Liftgate...............................................57
Keyless Entry...................................................58
Interior Luggage Compartment
Release..........................................................60
Principle of Operation..................................26
Fastening the Safety Belts..........................27
Safety Belt Height Adjustment.................29
Safety Belt Warning Lamp and Indicator
Chime.............................................................30
Safety Belt Minder.........................................30
Child Restraint and Safety Belt
Maintenance................................................32
Security
Passive Anti-Theft System..........................61
Anti-Theft Alarm............................................62
Personal Safety System™
Personal Safety System™..........................33
Steering Wheel
Supplementary Restraints
System
Adjusting the Steering Wheel...................64
Audio Control..................................................64
Voice Control...................................................65
Cruise Control..................................................65
Principle of Operation..................................34
Driver and Passenger Airbags....................35
Front Passenger Sensing System............36
Side Airbags.....................................................39
Wipers and Washers
Windshield Wipers........................................66
1
Fiesta (CCT)
Table of Contents
Manual Climate Control..............................99
Automatic Climate Control......................100
Hints on Controlling the Interior
Climate..........................................................101
Heated Windows and Mirrors..................104
Cabin Air Filter...............................................104
Windshield Washers.....................................66
Rear Window Wiper and Washers...........67
Lighting
General Information.....................................68
Lighting Control..............................................68
Autolamps........................................................69
Instrument Lighting Dimmer.....................69
Headlamp Exit Delay....................................70
Daytime Running Lamps.............................70
Front Fog Lamps............................................70
Direction Indicators.......................................70
Interior Lamps...................................................71
Ambient Lighting.............................................71
Seats
Sitting in the Correct Position.................106
Head Restraints............................................106
Manual Seats................................................108
Rear Seats.......................................................109
Heated Seats..................................................110
Auxiliary Power Points
Auxiliary Power Points.................................112
Cigar Lighter.....................................................112
Windows and Mirrors
Power Windows..............................................73
Global Opening and Closing......................74
Exterior Mirrors.................................................75
Interior Mirror....................................................76
Moonroof............................................................77
Storage Compartments
Cup Holders.....................................................113
Starting and Stopping the
Engine
Instrument Cluster
General Information.....................................114
Ignition Switch................................................114
Keyless Starting.............................................114
Starting a Gasoline Engine........................116
Switching Off the Engine............................117
Engine Block Heater......................................117
Gauges...............................................................78
Warning Lamps and Indicators.................79
Warning Lamps and Indicators - 1.6L
EcoBoost™..................................................82
Audible Warnings and Indicators.............85
Information Displays
Fuel and Refueling
General Information.....................................86
Clock...................................................................89
Trip Computer.................................................89
Personalized Settings..................................90
Information Messages.................................90
Climate Control
Safety Precautions.......................................119
Fuel Quality - Gasoline...............................120
Running Out of Fuel....................................120
Refueling...........................................................121
Fuel Consumption........................................122
Emission Control System...........................123
Principle of Operation..................................98
Air Vents............................................................98
Transmission
Manual Transmission..................................126
2
Fiesta (CCT)
Table of Contents
Manual Transmission - 1.6L
EcoBoost™.................................................127
Automatic Transmission............................128
Hill Start Assist..............................................132
Driving Hints
Breaking-In......................................................157
Cold Weather Precautions........................157
Driving Through Water................................157
Economical Driving......................................157
Floor Mats.......................................................158
Brakes
General Information....................................134
Hints on Driving With Anti-Lock
Brakes...........................................................134
Parking Brake.................................................134
Customer Assistance
Getting the Services You Need...............160
In California (U.S. Only)..............................161
The Better Business Bureau (BBB) Auto
Line Program (U.S. Only)......................162
Utilizing the Mediation/Arbitration
Program (Canada Only)........................162
Getting Assistance Outside the U.S. and
Canada.........................................................163
Ordering Additional Owner's
Literature.....................................................164
Reporting Safety Defects (U.S.
Only).............................................................164
Reporting Safety Defects (Canada
Only).............................................................165
Stability Control
Principle of Operation.................................136
Using Stability Control................................137
Using Stability Control - 1.6L
EcoBoost™.................................................137
Parking Aids
Principle of Operation.................................138
Parking Aid......................................................138
Rear View Camera.......................................139
Cruise Control
Roadside Emergencies
Principle of Operation.................................142
Using Cruise Control....................................142
Roadside Assistance..................................166
Hazard Warning Flashers...........................167
Fuel Shutoff....................................................167
Jump-Starting the Vehicle........................167
Driving Aids
Steering............................................................144
Fuses
Load Carrying
Fuse Specification Chart...........................169
Changing a Fuse............................................175
General Information....................................145
Load Limit.......................................................145
Rear Under Floor Storage..........................152
Cargo Nets.......................................................153
Luggage Covers.............................................153
Maintenance
General Information.....................................177
Opening and Closing the Hood................177
Under Hood Overview - 1.0L
EcoBoost.....................................................179
Under Hood Overview - 1.6L Duratec-16V
Ti-VCT (Sigma)........................................180
Towing
Towing a Trailer.............................................154
Transporting the Vehicle............................154
Towing the Vehicle on Four Wheels......154
3
Fiesta (CCT)
Table of Contents
Vehicle Storage............................................208
Under Hood Overview - 1.6L
EcoBoost™..................................................181
Engine Oil Dipstick - 1.0L EcoBoost.......182
Engine Oil Dipstick - 1.6L Duratec-16V
Ti-VCT (Sigma)........................................182
Engine Oil Dipstick - 1.6L
EcoBoost™.................................................182
Engine Oil Check...........................................182
Engine Coolant Check................................183
Automatic Transmission Fluid
Check............................................................185
Brake Fluid Check.........................................185
Power Steering Fluid Check.....................185
Fuel Filter.........................................................186
Washer Fluid Check.....................................186
Changing the 12V Battery..........................186
Checking the Wiper Blades......................186
Changing the Wiper Blades.....................186
Changing the Engine Air Filter..................187
Adjusting the Headlamps.........................188
Removing a Headlamp..............................189
Changing a Bulb - Vehicles With:
4-Door..........................................................190
Changing a Bulb - Vehicles With:
5-Door..........................................................195
Bulb Specification Chart...........................199
Technical Specifications..........................200
Wheels and Tires
General Information....................................210
Tire Care...........................................................210
Using Winter Tires.......................................224
Using Snow Chains.....................................225
Tire Pressure Monitoring System...........225
Changing a Road Wheel...........................228
Technical Specifications...........................232
Capacities and Specifications
Engine Specifications.................................233
Motorcraft Parts...........................................234
Vehicle Identification Number................235
Vehicle Certification Label.......................235
Transmission Code Designation............236
Accessories
Accessories.....................................................237
Ford Extended Service Plan
(ESP)
Ford Extended Service Plan (ESP).......239
Audio System
Vehicle Care
General Information...................................242
Audio unit - Vehicles With:
AM/FM/CD.................................................243
Audio unit - Vehicles With:
AM/FM/CD/SYNC...................................247
Audio unit - Vehicles With: Touchscreen
Display.........................................................252
Audio unit - Vehicles With: Sony Audio
System/Touchscreen Display.............253
Auxiliary Input Jack.....................................255
Audio Troubleshooting..............................256
Cleaning Products.......................................203
Cleaning the Exterior..................................203
Waxing.............................................................204
Cleaning the Engine...................................204
Cleaning the Windows and Wiper
Blades..........................................................205
Cleaning the Interior...................................205
Repairing Minor Paint Damage..............206
Cleaning the Instrument Panel and
Instrument Cluster Lens.......................206
Cleaning Leather Seats.............................207
Cleaning the Alloy Wheels.......................207
4
Fiesta (CCT)
Table of Contents
SYNC™
General Information....................................257
Using Voice Recognition...........................259
Using SYNC™ With Your Phone.............261
SYNC™ Applications and Services.......272
Using SYNC™ With Your Media
Player............................................................279
SYNC™ Troubleshooting..........................287
MyFord Touch™
General Information...................................293
Settings............................................................301
Entertainment.................................................311
Phone...............................................................328
Information....................................................334
Navigation......................................................343
Appendices
End User License Agreement..................353
Scheduled Maintenance
Scheduled Maintenance..........................368
5
Fiesta (CCT)
6
Fiesta (CCT)
Introduction
ABOUT THIS MANUAL
Thank you for choosing Ford. We
recommend that you take some time to
get to know your vehicle by reading this
manual. The more that you know about it,
the greater the safety and pleasure you
will get from driving it.
WARNING
Always drive with due care and
attention when using and operating
the controls and features on your
vehicle.
E154903
Note: This manual describes product
features and options available throughout
the range, sometimes even before they are
generally available. It may describe options
not fitted to your vehicle.
A
Right-hand side
B
Left-hand side
Protecting the Environment
You must play your part in protecting the
environment. Correct vehicle usage and
the authorized disposal of waste, cleaning
and lubrication materials are significant
steps toward this aim.
Note: Some of the illustrations in this
manual may be used for different models,
so may appear different to your vehicle.
However, the essential information in the
illustrations is always correct.
SYMBOLS GLOSSARY
Note: Always use and operate your vehicle
in line with all applicable laws and
regulations.
These are some of the symbols you may
see on your vehicle.
Safety alert
Note: Pass on this manual when selling
your vehicle. It is an integral part of the
vehicle.
See Owner's Manual
This manual may qualify the location of a
component as left-hand side or right-hand
side. The side is determined when facing
forward in the seat.
Anti-lock braking system
Avoid smoking, flames or sparks
Battery
7
Fiesta (CCT)
Introduction
Battery acid
Explosive gas
Brake fluid - non petroleum
based
Fan warning
Brake system
Fasten safety belt
Cabin air filter
Front airbag
Check fuel cap
Front fog lamps
Child safety door lock or unlock
Fuel pump reset
Child seat lower anchor
Fuse compartment
Child seat tether anchor
Hazard warning flashers
Cruise control
Heated rear window
Do not open when hot
Heated windshield
E71340
E91392
Engine air filter
Interior luggage compartment
release
Engine coolant
Jack
Engine coolant temperature
Lighting control
Engine oil
Low tire pressure warning
Maintain correct fluid level
8
Fiesta (CCT)
Introduction
Panic alarm
REPLACEMENT PARTS
RECOMMENDATION
Parking aid
Your vehicle has been built to the highest
standards using quality parts. We
recommend that you demand the use of
genuine Ford and Motorcraft parts
whenever your vehicle requires scheduled
maintenance or repair. You can clearly
identify genuine Ford and Motorcraft parts
by looking for the Ford, FoMoCo or
Motorcraft branding on the parts or their
packaging.
E139213
Parking brake
Power steering fluid
Power windows front/rear
Scheduled Maintenance and
Mechanical Repairs
Power window lockout
One of the best ways for you to make sure
that your vehicle provides years of service
is to have it maintained in line with our
recommendations using parts that
conform to the specifications detailed in
this Owner’s Manual. Genuine Ford and
Motorcraft parts meet or exceed these
specifications.
Service engine soon
Side airbag
Collision Repairs
Stability control
We hope that you never experience a
collision, but accidents do happen. Genuine
Ford replacement collision parts meet our
stringent requirements for fit, finish,
structural integrity, corrosion protection
and dent resistance. During vehicle
development we validate these parts
deliver the intended level of protection as
a whole system. A great way to know for
sure you are getting this level of protection
is to use genuine Ford replacement
collision parts.
Windshield wash and wipe
Air conditioning system
E162384
9
Fiesta (CCT)
Introduction
Warranty on Replacement Parts
DATA RECORDING
Genuine Ford and Motorcraft replacement
parts are the only replacement parts that
benefit from a Ford Warranty. Damage
caused to your vehicle as a result of the
failure of non-Ford parts may not be
covered by the Ford Warranty. For
additional information, refer to the terms
and conditions of the Ford Warranty.
Service Data Recording
Service data recorders in your vehicle are
capable of collecting and storing
diagnostic information about your vehicle.
This potentially includes information about
the performance or status of various
systems and modules in the vehicle, such
as engine, throttle, steering or brake
systems. In order to properly diagnose and
service your vehicle, Ford Motor Company,
Ford of Canada, and service and repair
facilities may access or share among them
vehicle diagnostic information received
through a direct connection to your vehicle
when diagnosing or servicing your vehicle.
Additionally, when your vehicle is in for
service or repair, Ford Motor Company,
Ford of Canada, and service and repair
facilities may access or share among them
data for vehicle improvement purposes.
For U.S. only (if equipped), if you choose
to use the SYNC Vehicle Health Report,
you consent that certain diagnostic
information may also be accessed
electronically by Ford Motor Company and
Ford authorized service facilities, and that
the diagnostic information may be used
for any purpose. See SYNC™ (page 257).
MOBILE COMMUNICATIONS
EQUIPMENT
Using mobile communications equipment
is becoming increasingly important in the
conduct of business and personal affairs.
However, you must not compromise your
own or others’ safety when using such
equipment. Mobile communications can
enhance personal safety and security when
appropriately used, particularly in
emergency situations. Safety must be
paramount when using mobile
communications equipment to avoid
negating these benefits. Mobile
communication equipment includes, but
is not limited to, cellular phones, pagers,
portable email devices, text messaging
devices and portable two-way radios.
WARNING
Event Data Recording
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
This vehicle is equipped with an event
data recorder. The main purpose of an
event data recorder is to record, in
certain crash or near crash-like
situations, such as an airbag
deployment or hitting a road obstacle;
this data will assist in understanding
how a vehicle’s systems performed.
The event data recorder is designed to
record data related to vehicle dynamics
and safety systems for a short period
of time, typically 30 seconds or less.
10
Fiesta (CCT)
Introduction
The event data recorder in this vehicle
is designed to record such data as:
• How various systems in your vehicle
were operating;
• Whether or not the driver and
passenger safety belts were
buckled/fastened;
• How far (if at all) the driver was
depressing the accelerator and/or
the brake pedal; and
• How fast the vehicle was travelling;
and
• Where the driver was positioning
the steering wheel.
or where required by law enforcement,
other government authorities or other
third parties acting with lawful
authority. Other parties may seek to
access the information independently
of Ford Motor Company and Ford of
Canada.
Note: Including to the extent that any
law pertaining to Event Data Recorders
applies to SYNC or its features, please
note the following: Once 911 Assist (if
equipped) is enabled (set ON), 911 Assist
may, through any paired and connected
cell phone, disclose to emergency
services that the vehicle has been in a
crash involving the deployment of an
airbag or, in certain vehicles, the
activation of the fuel pump shut-off.
Certain versions or updates to 911 Assist
may also be capable of being used to
electronically or verbally provide to 911
operators the vehicle location (such as
latitude and longitude), and/or other
details about the vehicle or crash or
personal information about the
occupants to assist 911 operators to
provide the most appropriate emergency
services. If you do not want to disclose
this information, do not activate the 911
Assist feature. See SYNC™ (page 257).
This data can help provide a better
understanding of the circumstances in
which crashes and injuries occur.
Note: Event data recorder data is
recorded by your vehicle only if a
non-trivial crash situation occurs; no data
is recorded by the event data recorder
under normal driving conditions and no
personal data or information (e.g., name,
gender, age, and crash location) is
recorded (see limitations regarding 911
Assist and Traffic, directions and
Information privacy below). However,
parties, such as law enforcement, could
combine the event data recorder data
with the type of personally identifying
data routinely acquired during a crash
investigation.
Additionally, when you connect to
Traffic, Directions and Information (if
equipped, U.S. only), the service uses
GPS technology and advanced vehicle
sensors to collect the vehicle’s current
location, travel direction, and speed
(“vehicle travel information”), only to
help provide you with the directions,
traffic reports, or business searches
that you request. If you do not want
Ford or its vendors to receive this
information, do not activate the
service. Ford Motor Company and the
To read data recorded by an event data
recorder, special equipment is required,
and access to the vehicle or the event
data recorder is needed. In addition to
the vehicle manufacturer, other
parties, such as law enforcement, that
have such special equipment, can read
the information if they have access to
the vehicle or the event data recorder.
Ford Motor Company and Ford of
Canada do not access event data
recorder information without obtaining
consent, unless pursuant to court order
11
Fiesta (CCT)
Introduction
Phone: 1-800-727-7000
vendors it uses to provide you with this
information do not store your vehicle
travel information. For more
information, see Traffic, Directions and
Information, Terms and Conditions.
See SYNC™ (page 257).
For more information regarding Ford Credit,
as well as access Account Manager, please
go to www.fordcredit.com.
SPECIAL NOTICES
CALIFORNIA PROPOSITION 65
New Vehicle Limited Warranty
WARNING
For a detailed description of what is
covered and what is not covered by your
vehicle’s New Vehicle Limited Warranty,
refer to the Warranty Manual that is
provided to you along with your Owner’s
Manual.
Some constituents of engine
exhaust, certain vehicle components,
certain fluids contained in vehicles
and certain products of component wear
contain or emit chemicals known to the
State of California to cause cancer and
birth defects or other reproductive harm.
Special Instructions
For your added safety, your vehicle is fitted
with sophisticated electronic controls.
PERCHLORATE
WARNINGS
Failure to follow the specific
warnings and instructions could
result in personal injury.
Certain components in your vehicle such
as airbag modules, safety belt
pretensioners and remote control batteries
may contain perchlorate material. Special
handling may apply for service or vehicle
end of life disposal. For more information
visit:
Front seat mounted rear-facing child
or infant seats should NEVER be
placed in front of an active
passenger airbag.
Web Address
EXPORT UNIQUE OPTIONS
www.dtsc.ca.gov/hazardouswaste/
perchlorate
For your particular global region, your
vehicle may be equipped with features and
options that are different from the features
and options that are described in this
Owner’s Manual. A market unique
supplement may be supplied that
complements this book. By referring to the
market unique supplement, if provided,
you can properly identify those features,
recommendations and specifications that
are unique to your vehicle. This Owner’s
FORD CREDIT
(U.S. Only)
Ford Credit offers a full range of financing
and lease plans to help you acquire your
vehicle. If you have financed or leased your
vehicle through Ford Credit, thank you for
your business.
For your convenience we offer a number
of ways to contact us, as well as help
manage your account.
12
Fiesta (CCT)
Introduction
Manual is written primarily for the U.S. and
Canadian Markets. Features or equipment
listed as standard may be different on units
built for Export. Refer to this Owner’s
Manual for all other required
information and warnings.
13
Fiesta (CCT)
Child Safety
GENERAL INFORMATION
WARNINGS
requirements of law. Ford recommends
checking with a NHTSA Certified Child
Passenger Safety Technician (CPST) and
consult your pediatrician to make sure your
child seat is appropriate for your child, and
is compatible with and properly installed
in your vehicle. To locate a child seat fitting
station and CPST, contact the NHTSA toll
free at 1-888-327-4236 or go to
http://www.nhtsa.dot.gov. In Canada,
check with your local St. John Ambulance
office for referral to a CPST or for further
information, contact your provincial
ministry of transportation, locate your local
St. John Ambulance office by searching for
St. John Ambulance on the internet, or
Transport Canada at 1-800-333-0371
(http://www.tc.gc.ca). Failure to properly
restrain children in safety seats made
especially for their height, age, and weight
may result in an increased risk of serious
injury or death to your child.
See the following sections for directions
on how to properly use safety restraints
for children.
WARNINGS
Always make sure your child is
secured properly in a device that is
appropriate for their height, age and
weight. Child safety restraints must be
bought separately from your vehicle.
Failure to follow these instructions and
guidelines may result in an increased risk
of serious injury or death to your child.
All children are shaped differently.
The recommendations for safety
restraints are based on probable
child height, age and weight thresholds
from National Highway Traffic Safety
Administration and other safety
organizations, or are the minimum
14
Fiesta (CCT)
Child Safety
Recommendations for Safety Restraints for Children
Child
Child size, height, weight, or age
Recommended restraint
type
Infants or
toddlers
Children weighing 40 lb (18 kg) or less
(generally age four or younger).
Use a child safety seat
(sometimes called an
infant carrier, convertible
seat, or toddler seat).
Small children
Children who have outgrown or no longer
properly fit in a child safety seat (generally children who are less than 4 ft. 9 in.
(1.45 m) tall, are greater than age four
and less than age 12, and between 40 lb
(18 kg) and 80 lb (36 kg) and upward to
100 lb (45 kg) if recommended by your
child restraint manufacturer).
Use a belt-positioning
booster seat.
Larger children Children who have outgrown or no longer
properly fit in a belt-positioning booster
seat (generally children who are at least
4 ft. 9 in. (1.45 m) tall or greater than 80
lb (36 kg) or 100 lb (45 kg) if recommended by child restraint manufacturer).
•
•
•
You are required by law to properly use
safety seats for infants and toddlers in
the United States and Canada.
Many states and provinces require that
small children use approved booster
seats until they reach age eight, a
height of 4 feet 9 inches (1.45 meters)
tall, or 80 pounds (36 kilograms).
Check your local and state or provincial
laws for specific requirements about
the safety of children in your vehicle.
When possible, always properly
restrain children 12 years of age and
under in a rear seating position of your
vehicle. Accident statistics suggest that
children are safer when properly
restrained in the rear seating positions
than in a front seating position. See
Front Passenger Sensing System
(page 36).
INSTALLING CHILD SEATS
Child Seats
E68920
15
Fiesta (CCT)
Use a vehicle safety belt
having the lap belt snug
and low across the hips,
shoulder belt centered
across the shoulder and
chest, and seat back
upright.
Child Safety
Use a child safety seat (sometimes called
an infant carrier, convertible seat, or
toddler seat) for infants, toddlers, or
children weighing 40 pounds (18
kilograms) or less (generally age four or
younger).
•
Using Lap and Shoulder Belts
Perform the following steps when
installing the child seat with combination
lap and shoulder belts:
•
WARNINGS
Airbags can kill or injure a child in a
child seat. NEVER place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the seat all the way
back.
Place your vehicle seat back in the
upright position.
Put the safety belt in the automatic
locking mode. See Step 5. This vehicle
does not require the use of a locking
clip.
Note: Although the child seat illustrated is
a forward facing child seat, the steps are
the same for installing a rear facing child
seat.
Children 12 and under should be
properly restrained in the rear seat
whenever possible.
Depending on where you secure a
child restraint, and depending on the
child restraint design, you may block
access to certain safety belt buckle
assemblies and LATCH lower anchors,
rendering those features potentially
unusable. To avoid risk of injury, occupants
should only use seating positions where
they are able to be properly restrained.
E142528
1.
When installing a child safety seat with
combination lap and shoulder belts:
• Use the correct safety belt buckle for
that seating position.
• Insert the belt tongue into the proper
buckle until you hear a snap and feel it
latch. Make sure the tongue is securely
fastened in the buckle.
• Keep the buckle release button
pointing up and away from the safety
seat, with the tongue between the child
seat and the release button, to prevent
accidental unbuckling.
E142529
2. Pull down on the shoulder belt and
then grasp the shoulder belt and lap
belt together.
16
Fiesta (CCT)
Position the child safety seat in a seat
with a combination lap and shoulder
belt.
Child Safety
E142530
E142875
3. While holding the shoulder and lap belt
portions together, route the tongue
through the child seat according to the
child seat manufacturer's instructions.
Be sure the belt webbing is not twisted.
5. To put the retractor in the automatic
locking mode, grasp the shoulder
portion of the belt and pull downward
until all of the belt is pulled out.
Note: The automatic locking mode is
available on the front passenger and rear
seats. This vehicle does not require the use
of a locking clip.
6. Allow the belt to retract to remove
slack. The belt will click as it retracts
to indicate it is in the automatic locking
mode.
7. Try to pull the belt out of the retractor
to make sure the retractor is in the
automatic locking mode (you should
not be able to pull more belt out). If the
retractor is not locked, unbuckle the
belt and repeat Steps 5 and 6.
E142531
4. Insert the belt tongue into the proper
buckle (the buckle closest to the
direction the tongue is coming from)
for that seating position until you hear
a snap and feel the latch engage. Make
sure the tongue is latched securely by
pulling on it.
E142533
17
Fiesta (CCT)
Child Safety
Using Lower Anchors and Tethers
for Children (LATCH)
8. Remove remaining slack from the belt.
Force the seat down with extra weight,
e.g., by pressing down or kneeling on
the child restraint while pulling up on
the shoulder belt in order to force slack
from the belt. This is necessary to
remove the remaining slack that will
exist once the extra weight of the child
is added to the child restraint. It also
helps to achieve the proper snugness
of the child seat to your vehicle.
Sometimes, a slight lean toward the
buckle will additionally help to remove
remaining slack from the belt.
9. Attach the tether strap (if the child seat
is equipped). See Using Tether
Straps later in this section.
WARNINGS
Never attach two child safety seats
to the same anchor. In a crash, one
anchor may not be strong enough to
hold two child safety seat attachments
and may break, causing serious injury or
death.
Depending on where you secure a
child restraint, and depending on the
child restraint design, you may block
access to certain safety belt buckle
assemblies or LATCH lower anchors,
rendering those features potentially
unusable. To avoid risk of injury, occupants
should only use seating positions where
they are able to be properly restrained.
The LATCH system is composed of three
vehicle anchor points: two lower anchors
located where your vehicle seat back and
seat cushion meet (called the seat bight)
and one top tether anchor located behind
that seating position.
LATCH compatible child safety seats have
two rigid or webbing mounted
attachments that connect to the two lower
anchors at the LATCH equipped seating
positions in your vehicle. This type of
attachment method eliminates the need
to use safety belts to attach the child seat,
however the safety belt can still be used
to attach the child seat. For forward-facing
child seats, the top tether strap must also
be attached to the proper top tether
anchor, if a top tether strap has been
provided with your child seat.
E142534
10.
Before placing the child in the seat,
forcibly move the seat forward and
back to make sure the seat is securely
held in place. To check this, grab the
seat at the belt path and attempt to
move it side to side and forward and
back. There should be no more than
1 inch (2.5 centimeters) of movement
for proper installation.
Ford recommends checking with a NHTSA
Certified Child Passenger Safety
Technician to make certain the child
restraint is properly installed. In Canada,
check with your local St. John Ambulance
office for referral to a Certified Passenger
Seat Technician.
18
Fiesta (CCT)
Child Safety
Use of Inboard Lower Anchors from the
Outboard Seating Positions (Center
Seating Use)
WARNING
The standardized spacing for LATCH
lower anchors is 11 inches (28
centimeters) center to center. Do not
use LATCH lower anchors for the center
seating position unless the child seat
manufacturer's instructions permit and
specify using anchors spaced at least as
far apart as those in this vehicle.
E142535
Your vehicle has LATCH lower anchors for
child seat installation at the seating
positions marked with the child seat
symbol.
The lower anchors at the center of the
second row rear seat are spaced 15 inches
(39 centimeters) apart. A child seat with
rigid LATCH attachments cannot be
installed at the center seating position.
LATCH compatible child seats (with
attachments on belt webbing) can only be
used at this seating position provided that
the child seat manufacturer's instructions
permit use with the anchor spacing stated.
Do not attach a child seat to any lower
anchor if an adjacent child seat is attached
to that anchor.
Each time you use the safety seat, check
that the seat is properly attached to the
lower anchors and tether anchor, if
applicable. Tug the child seat from side to
side and forward and back where it is
secured to your vehicle. The seat should
move less than one inch when you do this
for a proper installation.
E144054
The LATCH anchors are located at the rear
section of the rear seat between the
cushion and seat back below the symbols
as shown. Follow the child seat
manufacturer's instructions to properly
install a child seat with LATCH
attachments. Follow the instructions on
attaching child safety seats with tether
straps.
If the safety seat is not anchored properly,
the risk of a child being injured in a crash
greatly increases.
Attach LATCH lower attachments of the
child seat only to the anchors shown.
19
Fiesta (CCT)
Child Safety
Combining Safety Belt and LATCH
Lower Anchors for Attaching Child
Safety Seats
Perform the following steps to install a
child safety seat with tether anchors:
Note: If you install a child seat with rigid
LATCH attachments, do not tighten the
tether strap enough to lift the child seat off
your vehicle seat cushion when the child is
seated in it. Keep the tether strap just snug
without lifting the front of the child seat.
Keeping the child seat just touching your
vehicle seat gives the best protection in a
severe crash.
When used in combination, either the
safety belt or the LATCH lower anchors
may be attached first, provided a proper
installation is achieved. Attach the tether
strap afterward, if included with the child
seat.
Using Tether Straps
Many forward-facing child safety
seats include a tether strap
which extends from the back of
the child safety seat and hooks to an
anchoring point called the top tether
anchor. Tether straps are available as an
accessory for many older safety seats.
Four Door
The tether anchors in your vehicle are
located under a cover marked with the
tether anchor symbol.
1.
Contact the manufacturer of your child
seat for information about ordering a
tether strap, or to obtain a longer tether
strap if the tether strap on your safety seat
does not reach the appropriate top tether
anchor in your vehicle.
Route the child safety seat tether strap
over the back of the seat. For outboard
seating positions, route the tether strap
under the head restraint and between
the head restraint posts. For the center
seating positions, route the tether strap
over the top of the head restraint. If
needed, the head restraints can also
be removed.
Once the child safety seat has been
installed using either the safety belt, the
lower anchors of the LATCH system, or
both, you can attach the top tether strap.
The tether strap anchors in your vehicle
are in the following positions (shown from
top view):
E144274
2. Locate the correct anchor for the
selected seating position, then open
the tether anchor cover.
E142537
E144275
20
Fiesta (CCT)
Child Safety
3. Clip the tether strap to the anchor as
shown.
4. Tighten the child safety seat tether
strap according to the manufacturer's
instructions. If your child restraint
system is equipped with a tether strap,
and the child restraint manufacturer
recommends its use, Ford also
recommends its use.
Five Door
E142539
The tether anchors in your vehicle are
located on the back panel of the rear seat.
These are marked with the tether anchor
symbol.
1.
3. Clip the tether strap to the anchor as
shown.
4. Tighten the child safety seat tether
strap according to the manufacturer's
instructions. If your child restraint
system is equipped with a tether strap,
and the child restraint manufacturer
recommends its use, Ford also
recommends its use.
Route the child safety seat tether strap
over the back of the seat. For outboard
seating positions, route the tether strap
under the head restraint and between
the head restraint posts. For the center
seating positions, route the tether strap
over the top of the head restraint. If
needed, the head restraints can also
be removed.
CHILD SEAT POSITIONING
WARNINGS
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the vehicle seat
upon which the child seat is installed all
the way back. When possible, all children
age 12 and under should be properly
restrained in a rear seating position. If all
children cannot be seated and restrained
properly in a rear seating position, properly
restrain the largest child in the front seat.
E164077
2. Locate the correct anchor on the back
panel of the rear seat for the selected
seating position.
Always carefully follow the
instructions and warnings provided
by the manufacturer of any child
restraint to determine if the restraint device
is appropriate for your child's size, height,
weight, or age. Follow the child restraint
manufacturer's instructions and warnings
provided for installation and use in
21
Fiesta (CCT)
Child Safety
WARNINGS
conjunction with the instructions and
warnings provided by your vehicle
manufacturer. A safety seat that is
improperly installed or utilized, is
inappropriate for your child's height, age,
or weight or does not properly fit the child
may increase the risk of serious injury or
death.
WARNINGS
Always restrain an unoccupied child
seat or booster seat. These objects
may become projectiles in a crash or
sudden stop, which may increase the risk
of serious injury.
Never place, or allow a child to place,
the shoulder belt under a child's arm
or behind the back because it
reduces the protection for the upper part
of the body and may increase the risk of
injury or death in a crash.
Never let a passenger hold a child on
his or her lap while your vehicle is
moving. The passenger cannot
protect the child from injury in a crash,
which may result in serious injury or death.
To avoid risk of injury, do not leave
children or pets unattended in your
vehicle.
Never use pillows, books, or towels
to boost a child. They can slide
around and increase the likelihood
of injury or death in a crash.
Restraint
Type
Combined
child and
seat
weight
Use any attachment method as indicated below by X
LATCH
(lower
anchors
and top
tether
anchor)
LATCH
(lower
anchors
only)
Rear facing Up to 65 lb
child seat
(29 kg)
Safety belt Safety belt Safety belt
and LATCH
only
and top
(lower
tether
anchors
anchor
and top
tether
anchor)
X
X
Rear facing Over 65 lb
child seat
(29 kg)
Forward
facing
child seat
Up to 65 lb
(29 kg)
Forward
facing
child seat
Over 65 lb
(29 kg)
X
X
Note: The child seat must rest tightly
against the vehicle seat upon which it is
installed. It may be necessary to lift or
remove the head restraint. See Seats (page
106).
22
Fiesta (CCT)
X
X
X
X
Child Safety
•
BOOSTER SEATS
•
WARNING
Never place, or allow a child to place,
the shoulder belt under a child's arm
or behind the back because it
reduces the protection for the upper part
of the body and may increase the risk of
injury or death in a crash.
•
Does the lap belt rest low across the
hips?
Is the shoulder belt centered on the
shoulder and chest?
Can the child stay seated like this for
the whole trip?
Always use booster seats in conjunction
with your vehicle lap and shoulder belt.
Types of Booster Seats
Use a belt-positioning booster seat for
children who have outgrown or no longer
properly fit in a child safety seat (generally
children who are less than 4 feet 9 inches
(1.45 meters) tall, are greater than age four
(4) and less than age twelve (12), and
between 40 pounds (18 kilograms) and
80 pounds (36 kilograms) and upward to
100 pounds (45 kilograms) if
recommended by your child restraint
manufacturer). Many state and provincial
laws require that children use approved
booster seats until they reach age eight, a
height of 4 feet 9 inches (1.45 meters) tall,
or 80 pounds (36 kilograms).
E68924
Booster seats should be used until you can
answer YES to ALL of these questions
when seated without a booster seat:
•
E142595
•
•
Can the child sit all the way back
against their vehicle seat back with
knees bent comfortably at the edge of
the seat cushion?
Can the child sit without slouching?
23
Fiesta (CCT)
Backless booster seats
If your backless booster seat has a
removable shield, remove the shield. If a
vehicle seating position has a low seat
back or no head restraint, a backless
booster seat may place your child's head
(as measured at the tops of the ears)
above the top of the seat. In this case,
move the backless booster to another
seating position with a higher seat back or
head restraint and lap and shoulder belts,
or consider using a high back booster seat.
Child Safety
If, with a backless booster seat, you cannot
find a seating position that adequately
supports your child's head, a high back
booster seat would be a better choice.
Children and booster seats vary in size and
shape. Choose a booster that keeps the
lap belt low and snug across the hips,
never up across the stomach, and lets you
adjust the shoulder belt to cross the chest
and rest snugly near the center of the
shoulder. The following drawings compare
the ideal fit (center) to a shoulder belt
uncomfortably close to the neck and a
shoulder belt that could slip off the
shoulder. The drawings also show how the
lap belt should be low and snug across the
child's hips.
E70710
•
High back booster seats
E142596
E142597
24
Fiesta (CCT)
Child Safety
Right-Hand Side
If the booster seat slides on the vehicle
seat upon which it is being used, placing a
rubberized mesh sold as shelf or carpet
liner under the booster seat may improve
this condition. Do not introduce any item
thicker than this under the booster seat.
Check with the booster seat
manufacturer's instructions.
Turn clockwise to lock and
counterclockwise to unlock.
CHILD SAFETY LOCKS
WARNING
You cannot open the rear doors from
inside if you have put the child safety
locks on.
E156821
Left-Hand Side
Turn counterclockwise to lock and
clockwise to unlock.
25
Fiesta (CCT)
Safety Belts
PRINCIPLE OF OPERATION
WARNINGS
When possible, all children 12 years
old and under should be properly
restrained in a rear seating position.
Failure to follow this could seriously
increase the risk of injury or death.
WARNINGS
Always drive and ride with your seat
back upright and the lap belt snug
and low across the hips.
Safety belts and seats can become
hot in a vehicle that has been closed
up in sunny weather; they could burn
a small child. Check seat covers and
buckles before you place a child anywhere
near them.
To reduce the risk of injury, make
sure children sit where they can be
properly restrained.
Never let a passenger hold a child on
his or her lap while the vehicle is
moving. The passenger cannot
protect the child from injury in a crash.
Front and rear seat occupants,
including pregnant women, should
wear safety belts for optimum
protection in an accident.
All occupants of the vehicle,
including the driver, should always
properly wear their safety belts, even
when an airbag supplemental restraint
system is provided. Failure to properly wear
your safety belt could seriously increase
the risk of injury or death.
All seating positions in this vehicle have
lap and shoulder safety belts. All
occupants of the vehicle should always
properly wear their safety belts, even when
an airbag supplemental restraint system
is provided.
It is extremely dangerous to ride in a
cargo area, inside or outside of a
vehicle. In a crash, people riding in
these areas are more likely to be seriously
injured or killed. Do not allow people to ride
in any area of your vehicle that is not
equipped with seats and safety belts. Be
sure everyone in your vehicle is in a seat
and using a safety belt properly.
The safety belt system consists of:
• lap and shoulder safety belts.
• shoulder safety belt with automatic
locking mode, (except driver safety
belt).
• height adjuster at the front outboard
seating positions.
• safety belt pretensioner at the front
outboard seating positions.
• belt tension sensor at the front
outboard passenger seating position.
In a rollover crash, an unbelted
person is significantly more likely to
die than a person wearing a safety
belt.
Each seating position in your vehicle
has a specific safety belt assembly
which is made up of one buckle and
one tongue that are designed to be used
as a pair. 1) Use the shoulder belt on the
outside shoulder only. Never wear the
shoulder belt under the arm. 2) Never
swing the safety belt around your neck over
the inside shoulder. 3) Never use a single
belt for more than one person.
•
26
Fiesta (CCT)
Safety belt warning light and chime.
Safety Belts
•
Crash sensors and monitoring system
with readiness indicator.
The safety belt pretensioners at the front
seating positions are designed to tighten
the safety belts when activated. In frontal
and near-frontal crashes, the safety belt
pretensioners may be activated alone or,
if the crash is of sufficient severity, together
with the front airbags. The pretensioners
may also activate when a side curtain
airbag is deployed.
E142588
2. To unfasten, press the release button
and remove the tongue from the
buckle.
FASTENING THE SAFETY
BELTS
The front outboard and rear safety
restraints in the vehicle are combination
lap and shoulder belts.
E142589
E142587
When in use, the rear safety belts should
be placed in the belt guides on the
outboard seat backs.
1.
Restraint of Pregnant Women
Insert the belt tongue into the proper
buckle (the buckle closest to the
direction the tongue is coming from)
until you hear a snap and feel it latch.
Make sure the tongue is securely
fastened in the buckle.
WARNING
Always ride and drive with your seat
back upright and the safety belt
properly fastened. The lap portion of
the safety belt should fit snug and be
positioned low across the hips. The
shoulder portion of the safety belt should
be positioned across the chest. Pregnant
women should also follow this practice.
See the following figure.
27
Fiesta (CCT)
Safety Belts
All safety restraints in the vehicle are
combination lap and shoulder belts. The
driver safety belt has the first type of
locking mode, and the front outboard
passenger and rear seat safety belts have
both types of locking modes described as
follows:
Vehicle Sensitive Mode
This is the normal retractor mode, which
allows free shoulder belt length
adjustment to your movements and
locking in response to vehicle movement.
For example, if the driver brakes suddenly
or turns a corner sharply, or the vehicle
receives an impact of approximately 5 mph
(8 km/h) or more, the combination safety
belts will lock to help reduce forward
movement of the driver and passengers.
E142590
Pregnant women should always wear their
safety belt. The lap belt portion of a
combination lap and shoulder belt should
be positioned low across the hips below
the belly and worn as tight as comfort will
allow. The shoulder belt should be
positioned to cross the middle of the
shoulder and the center of the chest.
In addition, the retractor is designed to lock
if the webbing is pulled out too quickly. If
this occurs, let the belt retract slightly and
pull webbing out again in a slow and
controlled manner.
Safety Belt Locking Modes
WARNINGS
After any vehicle crash, the safety
belt system at all passenger seating
positions must be checked by an
authorized dealer to verify that the
automatic locking retractor feature for
child seats is still functioning properly. In
addition, all safety belts should be checked
for proper function.
Automatic Locking Mode
In this mode, the shoulder belt is
automatically pre-locked. The belt will still
retract to remove any slack in the shoulder
belt. The automatic locking mode is not
available on the driver safety belt.
Belt and retractor assembly must be
replaced if the safety belt assembly
automatic locking retractor feature
or any other safety belt function is not
operating properly when checked by an
authorized dealer. Failure to replace the
belt and retractor assembly could increase
the risk of injury in crashes.
When to Use the Automatic Locking
Mode
This mode should be used any time a child
safety seat, except a booster, is installed
in passenger front or rear seating positions.
Children 12 years old and under should be
properly restrained in a rear seating
position whenever possible. See Child
Safety (page 14).
28
Fiesta (CCT)
Safety Belts
Use only extensions manufactured by the
same supplier as the safety belt.
Manufacturer identification is located at
the end of the webbing on the label. Also,
use the safety belt extension only if the
safety belt is too short for you when fully
extended.
How to Use the Automatic Locking
Mode
SAFETY BELT HEIGHT
ADJUSTMENT
WARNING
Position the safety belt height
adjuster so that the belt rests across
the middle of your shoulder. Failure
to adjust the safety belt properly could
reduce the effectiveness of the safety belt
and increase the risk of injury in a crash.
E142591
1.
Buckle the combination lap and
shoulder belt.
2. Grasp the shoulder portion and pull
downward until the entire belt is pulled
out.
Adjust the height of the shoulder belt so
the belt rests across the middle of your
shoulder.
Allow the belt to retract. As the belt
retracts, you will hear a clicking sound. This
indicates the safety belt is now in the
automatic locking mode.
How to Disengage the Automatic
Locking Mode
Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and activate the vehicle
sensitive (emergency) locking mode.
Safety Belt Extension Assembly
E145664
WARNING
To adjust the shoulder belt height:
Do not use extensions to change the
fit of the shoulder belt across the
torso.
1.
Pull the button and slide the height
adjuster up or down.
2. Release the button and pull down on
the height adjuster to make sure it is
locked in place.
If the safety belt is too short when fully
extended, a safety belt extension assembly
can be obtained from an authorized dealer.
29
Fiesta (CCT)
Safety Belts
This lamp illuminates and an
audible warning will sound if the
driver's safety belt has not been
fastened when the vehicle's ignition is
turned on.
SAFETY BELT WARNING LAMP
AND INDICATOR CHIME (IF
EQUIPPED)
Conditions of operation
If...
Then...
The driver's safety belt is not buckled
before the ignition switch is turned to the
on position...
The safety belt warning light illuminates 12 minutes and the warning chime sounds
4-8 seconds.
The driver's safety belt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The safety belt warning light and warning
chime turn off.
The driver's safety belt is buckled before The safety belt warning light and indicator
the ignition switch is turned to the on posichime remain off.
tion...
The system uses information from the
front passenger sensing system to
determine if a front seat passenger is
present and therefore potentially in need
of a warning. To avoid activating the
Belt-Minder feature for objects placed in
the front passenger seat, warnings will only
be given to front seat occupants as
determined by the front passenger sensing
system.
SAFETY BELT MINDER (IF
EQUIPPED)
Belt-Minder®
This feature supplements the safety belt
warning function by providing additional
reminders by intermittently sounding a
chime and illuminating the safety belt
warning light when the driver's or front
passenger's seat is occupied and the
safety belt is unbuckled.
If the Belt-Minder warnings have expired
(warnings for about five minutes) for one
occupant (driver or front passenger), the
other occupant can still activate the
Belt-Minder feature.
30
Fiesta (CCT)
Safety Belts
If...
Then...
The driver's and front passenger's safety
belts are buckled before the ignition switch
is turned to the on position or less than 1-2
minutes have elapsed since the ignition
switch has been turned to on...
The Belt-Minder feature will not activate.
The driver's or front passenger's safety belt The Belt-Minder feature is activated - the
is not buckled when the vehicle has reached safety belt warning light illuminates and
at least 6 mph (9.7 km/h) and 1-2 minutes the warning chime sounds for six seconds
have elapsed since the ignition switch has every 25 seconds, repeating for about five
minutes or until the safety belts are
been turned to on...
buckled.
The driver's or front passenger's safety belt The Belt-Minder feature is activated - the
becomes unbuckled for about one minute safety belt warning light illuminates and
while the vehicle is traveling at least 6 mph the warning chime sounds for six seconds
(9.7 km/h) and more than 1-2 minutes have every 25 seconds, repeating for about five
minutes or until the safety belts are
elapsed since the ignition switch has been
buckled.
turned to on...
The system can be deactivated or
activated by performing the following
procedure:
Deactivating and Activating the
Belt-Minder Feature
Before following the procedure, make sure
that:
• the parking brake is set
• the transmission selector lever is in
position P (automatic transmission)
or N (manual transmission)
• the ignition is off
• the driver and front passenger safety
belts are unbuckled.
WARNING
While the system allows you to
deactivate it, this system is designed
to improve your chances of being
safely belted and surviving an accident.
We recommend you leave the system
activated for yourself and others who may
use the vehicle. To reduce the risk of injury,
do not deactivate or activate the system
while driving the vehicle.
1.
Turn the ignition on. Do not start the
engine.
2. Wait until the safety belt warning light
turns off (about one minute). After
Step 2, wait an additional five seconds
before proceeding with Step 3. Once
Step 3 is started, the procedure must
be completed within 30 seconds.
Note: The driver and front passenger
warning are deactivated and activated
independently. When deactivating or
activating one seating position, do not
buckle the other position as this will
terminate the process.
Read Steps 1 - 4 thoroughly before
proceeding with the programming
procedure.
31
Fiesta (CCT)
Safety Belts
3. For the seating position being disabled,
buckle then unbuckle the safety belt
three times at a moderate speed,
ending in the unbuckled state. After
Step 3, the safety belt warning light will
turn on.
4. While the safety belt warning light is
on, buckle and then unbuckle the
safety belt. After Step 4, the safety belt
warning light will flash for confirmation.
• This will disable the feature for that
seating position if it is currently
enabled.
• This will enable the feature for that
seating position if it is currently
disabled.
Ford Motor Company recommends that
all safety belt assemblies in use in vehicles
involved in a crash be replaced. However,
if the crash was minor and an authorized
dealer finds that the belts do not show
damage and continue to operate properly,
they do not need to be replaced. Safety
belt assemblies not in use during a crash
should also be inspected and replaced if
either damage or improper operation is
noted.
Properly care for safety belts.
CHILD RESTRAINT AND
SAFETY BELT MAINTENANCE
Inspect the vehicle safety belts and child
safety seat systems periodically to make
sure they work properly and are not
damaged. Inspect the vehicle and child
seat safety belts to make sure there are no
nicks, tears or cuts. Replace if necessary.
All vehicle safety belt assemblies, including
retractors, buckles, front safety belt buckle
assemblies, buckle support assemblies
(slide bar-if equipped), shoulder belt
height adjusters (if equipped), shoulder
belt guide on seat back (if equipped), child
safety seat LATCH and tether anchors, and
attaching hardware, should be inspected
after a crash. Read the child restraint
manufacturer's instructions for additional
inspection and maintenance information
specific to the child restraint.
32
Fiesta (CCT)
Personal Safety System™
The Personal Safety System provides an
improved overall level of frontal crash
protection to front seat occupants and is
designed to help further reduce the risk of
airbag-related injuries. The system is able
to analyze different occupant conditions
and crash severity before activating the
appropriate safety devices to help better
protect a range of occupants in a variety
of frontal crash situations.
module. During a crash, the restraints
control module may activate the safety
belt pretensioners and may activate either
one or both stages of the dual-stage airbag
supplemental restraints based on crash
severity and occupant conditions.
Your vehicle's Personal Safety System
consists of:
• Driver and passenger dual-stage airbag
supplemental restraints.
• Front outboard safety belts with
pretensioners, energy management
retractors (first row only), and safety
belt usage sensors.
• Driver’s seat position sensor.
• Front passenger sensing system.
• Passenger airbag off and on indicator
lamp.
• Front crash severity sensors.
• Restraints control module with impact
and safing sensors.
• Restraint system warning light and
backup tone.
• The electrical wiring for the airbags,
crash sensor(s), safety belt
pretensioners, front safety belt usage
sensors, driver seat position sensor,
front passenger sensing system, and
indicator lights.
How Does the Personal Safety
System Work?
The Personal Safety System can adapt the
deployment strategy of your vehicle’s
safety devices according to crash severity
and occupant conditions. A collection of
crash and occupant sensors provides
information to the restraints control
33
Fiesta (CCT)
Supplementary Restraints System
The airbags are a supplemental restraint
system and are designed to work with the
safety belts to help protect the driver and
right front passenger from certain upper
body injuries. Airbags do not inflate slowly;
there is a risk of injury from a deploying
airbag.
PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or
gently, and the risk of injury from a
deploying airbag is the greatest close
to the trim covering the airbag module.
Note: You will hear a loud bang and see a
cloud of harmless powdery residue if an
airbag deploys. This is normal.
All occupants of your vehicle,
including the driver, should always
properly wear their safety belts, even
when an airbag supplemental restraint
system is provided. Failure to properly wear
your safety belt could seriously increase
the risk of injury or death.
The airbags inflate and deflate rapidly
upon activation. After airbag deployment,
it is normal to notice a smoke-like, powdery
residue or smell the burnt propellant. This
may consist of cornstarch, talcum powder
(to lubricate the bag) or sodium
compounds (for example, baking soda)
that result from the combustion process
that inflates the airbag. Small amounts of
sodium hydroxide may be present which
may irritate the skin and eyes, but none of
the residue is toxic.
Always transport children 12 years
old and under in the back seat and
always properly use appropriate
child restraints. Failure to follow this could
seriously increase the risk of injury or death.
Never place your arm over the airbag
module as a deploying airbag can
result in serious arm fractures or
other injuries.
While the system is designed to help
reduce serious injuries, contact with a
deploying airbag may also cause abrasions
or swelling. Temporary hearing loss is also
a possibility as a result of the noise
associated with a deploying airbag.
Because airbags must inflate rapidly and
with considerable force, there is the risk of
death or serious injuries such as fractures,
facial and eye injuries or internal injuries,
particularly to occupants who are not
properly restrained or are otherwise out of
position at the time of airbag deployment.
Thus, it is extremely important that
occupants be properly restrained as far
away from the airbag module as possible
while maintaining vehicle control.
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the seat all the way
back.
Do not attempt to service, repair, or
modify the airbag supplemental
restraint systems or its fuses as you
could be seriously injured or killed. Contact
your authorized dealer as soon as possible.
Several airbag system components
get hot after inflation. Do not touch
them after inflation as this may result
in serious injury.
Routine maintenance of the airbags is not
required.
If the airbag has deployed, the airbag
will not function again and must be
replaced immediately. If the airbag
is not replaced, the unrepaired area will
increase the risk of injury in a collision.
34
Fiesta (CCT)
Supplementary Restraints System
SOS POST-CRASH ALERT
SYSTEM
The system flashes the turn signal lamps
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the safety belt pretensioners.
The horn and lamps will turn off when:
• the hazard control button is pressed
• the panic button (if equipped) is
pressed on the remote entry
transmitter, or
• your vehicle runs out of power.
E151127
The driver and front passenger airbags will
deploy during significant frontal and near
frontal crashes.
The driver and passenger front airbag
system consists of:
• driver and passenger airbag modules.
• front passenger sensing system.
DRIVER AND PASSENGER
AIRBAGS
WARNINGS
Never place your arm or any objects
over an airbag module. Placing your
arm over a deploying airbag can
result in serious arm fractures or other
injuries. Objects placed on or over the
airbag inflation area may cause those
objects to be propelled by the airbag into
your face and torso causing serious injury.
· crash sensors and monitoring
system with readiness indicator.
See Crash Sensors and Airbag
Indicator (page 41).
Proper Driver and Front Passenger
Seating Adjustment
WARNING
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the seat all the way
back.
National Highway Traffic Safety
Administration (NHTSA)
recommends a minimum distance
of at least 10 inches (25 centimeters)
between an occupant’s chest and the
driver airbag module.
To properly position yourself away from
the airbag:
• Move your seat to the rear as far as you
can while still reaching the pedals
comfortably.
• Recline the seat slightly (one or two
degrees) from the upright position.
35
Fiesta (CCT)
Supplementary Restraints System
After all occupants have adjusted their
seats and put on safety belts, it is very
important that they continue to sit
properly. A properly seated occupant sits
upright, leaning against the seat back, and
centered on the seat cushion, with their
feet comfortably extended on the floor.
Sitting improperly can increase the chance
of injury in a crash event. For example, if
an occupant slouches, lies down, turns
sideways, sits forward, leans forward or
sideways, or puts one or both feet up, the
chance of injury during a crash is greatly
increased.
FRONT PASSENGER SENSING
SYSTEM
WARNINGS
Even with Advanced Restraints
Systems, children 12 and under
should be properly restrained in a
rear seating position. Failure to follow this
could seriously increase the risk of injury or
death.
Sitting improperly out of position or
with the seat back reclined too far
can take off weight from the seat
cushion and affect the decision of the front
passenger sensing system, resulting in
serious injury or death in a crash.
Children and Airbags
WARNING
To reduce the risk of possible serious
injury: Do not stow objects in seat
back map pocket or hang objects off
seat back if a child is in the front passenger
seat. Do not place objects underneath the
front passenger seat or between the seat
and the center console. Check the
passenger airbag off or pass airbag off
indicator lamp for proper airbag status.
Failure to follow these instructions may
interfere with the front passenger seat
sensing system.
Airbags can kill or injure a child in a
child seat. Never place a rear-facing
child seat in front of an active airbag.
If you must use a forward-facing child seat
in the front seat, move the seat all the way
back.
Any alteration or modification to the
front passenger seat may affect the
performance of the front passenger
sensing system.
This system works with sensors that are
part of the front passenger’s seat and
safety belt to detect the presence of a
properly-seated occupant and determine
if the front passenger’s frontal airbag
should be enabled (may inflate) or not.
E142846
Children must always be properly
restrained. Accident statistics suggest that
children are safer when properly restrained
in the rear seating positions than in the
front seating position. Failure to follow
these instructions may increase the risk of
injury in a crash.
36
Fiesta (CCT)
Supplementary Restraints System
The front passenger sensing system is
designed to enable (may inflate) the front
passenger's frontal airbag anytime the
system senses that a person of adult size
is sitting properly in the front passenger
seat.
•
E157152
The front passenger sensing system uses
a pass airbag off indicator which will
illuminate and stay lit to remind you that
the front passenger frontal airbag is
disabled. The indicator lamp is located at
the top center of the instrument panel.
If a person of adult size is sitting in the front
passenger’s seat, but the airbag off
indicator lamp is lit, it is possible that the
person isn’t sitting properly in the seat. If
this happens:
• Turn the vehicle off and ask the person
to place the seat back in the full upright
position.
• Have the person sit upright in the seat,
centered on the seat cushion, with the
person’s legs comfortably extended.
• Restart the vehicle and have the person
remain in this position for about two
minutes. This will allow the system to
detect that person and enable the
passenger’s frontal airbag.
• If the indicator lamp remains lit even
after this, the person should be advised
to ride in the rear seat.
Note: When the ignition is first tuned on,
the indicator lamp will illuminate for a short
period of time to confirm it is functional.
The front passenger sensing system is
designed to disable (will not inflate) the
front passenger's frontal airbag when a
rear facing infant seat, a forward-facing
child restraint, or a booster seat is
detected. Even with this technology,
parents are STRONGLY encouraged to
always properly restrain children in the rear
seat. The sensor also turns off the
passenger front airbag and seat-mounted
side airbag when the passenger seat is
empty.
•
•
When the front passenger sensing
system disables (will not inflate) the
front passenger frontal airbag, the
indicator lamp will illuminate and stay
lit to remind you that the front
passenger frontal airbag is disabled.
If the child restraint has been installed
and the indicator lamp is not lit, then
turn the vehicle off, remove the child
restraint from the vehicle and reinstall
the restraint following the child
restraint manufacturer's instructions.
37
Fiesta (CCT)
When the front passenger sensing
system enables the front passenger
frontal airbag (may inflate), the
indicator lamp will be unlit and stay
unlit.
Supplementary Restraints System
Occupant
Passenger airbag OFF indicator
Passenger airbag
Empty
Unlit
Disabled
Child
Lit
Disabled
Adult
Unlit
Enabled
Note: When the passenger airbag off light
is illuminated, the passenger (seat
mounted) side airbag may be disabled to
avoid the risk of airbag deployment injuries.
The conditions listed above may cause the
weight of a properly seated occupant to
be incorrectly interpreted by the front
passenger sensing system. The person in
the front passenger seat may appear
heavier or lighter due to the conditions
described in the list above.
After all occupants have adjusted their
seats and put on safety belts, it is very
important that they continue to sit
properly. A properly seated occupant sits
upright, leaning against the seat back, and
centered on the seat cushion, with their
feet comfortably extended on the floor.
Sitting improperly can increase the chance
of injury in a crash event. For example, if
an occupant slouches, lies down, turns
sideways, sits forward, leans forward or
sideways, or puts one or both feet up, the
chance of injury during a crash is greatly
increased.
Make sure the front passenger
sensing system is operating
properly. See Crash Sensors
and Airbag Indicator (page 41).
If the airbag readiness light is lit, do the
following:
The driver and adult passengers should
check for objects lodged underneath the
front passenger seat, or cargo interfering
with the seat.
If you think that the status of the passenger
airbag off indicator lamp is incorrect, check
for the following:
If there are lodged objects, or cargo is
interfering with the seat, take the following
steps to remove the obstruction:
•
•
•
•
•
•
•
•
•
•
•
Objects lodged underneath the seat
Objects between the seat cushion and
the center console
Objects hanging off the seat back
Objects stowed in the seat back map
pocket
Objects placed on the occupant's lap
Cargo interference with the seat
Other passengers pushing or pulling on
the seat
Rear passenger feet and knees resting
or pushing on the seat
•
•
38
Fiesta (CCT)
Pull the vehicle over.
Turn the vehicle off.
Driver and adult passengers should
check for any objects lodged
underneath the front passenger seat
or cargo interfering with the seat.
Remove the obstruction(s) (if found).
Restart the vehicle.
Supplementary Restraints System
•
•
Wait at least two minutes and verify
that the airbag readiness light is no
longer illuminated.
If the airbag readiness light remains
illuminated, this may or may not be a
problem due to the front passenger
sensing system.
WARNINGS
If the side airbag has deployed, the
airbag will not function again. The
side airbag system (including the
seat) must be inspected and serviced by
an authorized dealer. If the airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
Do not attempt to repair or service the
system. Take your vehicle immediately to
an authorized dealer.
The side airbags are located on the
outboard side of the seatbacks of the front
seats. In certain sideways crashes, the
airbag on the side affected by the crash
will be inflated. The airbag was designed
to inflate between the door panel and
occupant to further enhance the protection
provided occupants in side impact crashes.
If it is necessary to modify an advanced
front airbag system to accommodate a
person with disabilities, contact the Ford
Customer Relationship Center. See
Getting the Services You Need (page
160).
SIDE AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the airbag
cover, on the side of the seatbacks
(of the front seats), or in front seat areas
that may come into contact with a
deploying airbag. Failure to follow these
instructions may increase the risk of
personal injury in the event of a crash.
E152533
Do not use accessory seat covers.
The use of accessory seat covers
may prevent the deployment of the
side airbags and increase the risk of injury
in an accident.
The system consists of the following:
• A label or embossed side panel
indicating that side airbags are fitted
to your vehicle.
• Side airbags located inside the driver
and front passenger seatbacks.
• Front passenger sensing system.
Do not lean your head on the door.
The side airbag could injure you as it
deploys from the side of the
seatback.
·Crash sensors and monitoring
system with readiness indicator.
See Crash Sensors and Airbag
Indicator (page 41).
Do not attempt to service, repair, or
modify the airbag, its fuses or the
seat cover on a seat containing an
airbag as you could be seriously injured or
killed. Contact your authorized dealer as
soon as possible.
Note: The passenger sensing system will
deactivate the passenger seat-mounted
side airbag if it detects an empty passenger
seat.
39
Fiesta (CCT)
Supplementary Restraints System
The design and development of the side
airbag system included recommended
testing procedures that were developed
by a group of automotive safety experts
known as the Side Airbag Technical
Working Group. These recommended
testing procedures help reduce the risk of
injuries related to the deployment of side
airbags.
WARNINGS
Do not attempt to service, repair, or
modify the side curtain airbags, its
fuses, the A, B, or C pillar trim, or the
headliner on a vehicle containing side
curtain airbags. Contact your authorized
dealer as soon as possible.
All occupants of the vehicle including
the driver should always wear their
safety belts even when an airbag
supplemental restraint system and side
curtain airbag is provided.
KNEE AIRBAG (IF EQUIPPED)
A driver’s knee airbag is located under or
within the instrument panel. During a crash,
the restraints control module may activate
the driver’s knee airbag based on crash
severity and occupant conditions. Under
certain crash and occupant conditions, the
driver’s knee airbag may deploy but the
driver’s front airbag may not activate. As
with front and side airbags, it is important
to be properly seated and restrained to
reduce the risk of death or serious injury.
To reduce risk of injury, do not
obstruct or place objects in the
deployment path of the side curtain
airbag.
If the side curtain airbags have
deployed, the side curtain airbags
will not function again. The side
curtain airbags (including the A, B and C
pillar trim and headliner) must be
inspected and serviced by an authorized
dealer. If the side curtain airbag is not
replaced, the unrepaired area will increase
the risk of injury in a crash.
Make sure the knee airbag is
operating properly. See Crash
Sensors and Airbag Indicator
(page 41).
The side curtain airbags will deploy during
significant side crashes. The side curtain
airbags are mounted to the roof side-rail
sheet metal, behind the headliner, above
each row of seats. The side curtain airbags
are designed to inflate between the side
window area and occupants to further
enhance protection provided in side impact
crashes.
SIDE CURTAIN AIRBAGS
WARNINGS
Do not place objects or mount
equipment on or near the headliner
at the siderail that may come into
contact with a deploying side curtain
airbag. Failure to follow these instructions
may increase the risk of personal injury in
the event of a crash.
The system consists of the following:
Do not lean your head on the door.
The side curtain airbag could injure
you as it deploys from the headliner.
40
Fiesta (CCT)
Supplementary Restraints System
CRASH SENSORS AND
AIRBAG INDICATOR
WARNING
Modifying or adding equipment to
the front end of the vehicle (including
frame, bumper, front end body
structure and tow hooks) may affect the
performance of the airbag system,
increasing the risk of injury. Do not modify
the front end of the vehicle.
E75004
•
•
Side curtain airbags located above the
trim panels over the front and rear side
windows identified by a label or
wording on the headliner or roof-pillar
trim.
A flexible headliner which opens above
the side doors to allow side air curtain
deployment.
The vehicle has a collection of crash and
occupant sensors which provide
information to the restraints control
module which deploys (activates) the
front safety belt pretensioners, driver
airbag, passenger airbag, knee airbag(s),
seat mounted side airbags, and the side
curtain airbags. Based on the type of crash
(frontal impact or side impact), the
restraints control module will deploy the
appropriate safety devices.
Crash sensors and monitoring
system with readiness indicator.
See Crash Sensors and Airbag
Indicator (page 41).
The restraints control module also
monitors the readiness of the above safety
devices plus the crash and occupant
sensors. The readiness of the safety
system is indicated by a warning indicator
light in the instrument cluster or by a
backup tone if the warning light is not
working. Routine maintenance of the
airbag is not required.
Children 12 years old and under should
always be properly restrained in the back
seats. The side curtain airbags will not
interfere with children restrained using a
properly installed child or booster seat
because it is designed to inflate downward
from the headliner above the doors along
the side window opening.
A difficulty with the system is indicated by
one or more of the following:
The design and development of the side
curtain airbags included recommended
testing procedures that were developed
by a group of automotive safety experts
known as the Side Airbag Technical
Working Group. These recommended
testing procedures help reduce the risk of
injuries related to the deployment of side
curtain airbags.
The readiness light will not
illuminate immediately after the
ignition is turned on.
•
•
41
Fiesta (CCT)
The readiness light will either flash or
stay lit.
A series of five beeps will be heard. The
tone pattern will repeat periodically
until the problem, the light or both are
repaired.
Supplementary Restraints System
If any of these things happen, even
intermittently, have the supplemental
restraint system serviced at an authorized
dealer immediately. Unless serviced, the
system may not function properly in the
event of a crash.
•
The safety belt pretensioners and the front
airbag supplemental restraint system are
designed to activate when the vehicle
sustains longitudinal deceleration
sufficient to cause the restraints control
module to deploy a safety device.
•
The fact that the safety belt pretensioners
or front airbags did not activate for both
front seat occupants in a crash does not
mean that something is wrong with the
system. Rather, it means the restraints
control module determined the accident
conditions (crash severity, belt usage)
were not appropriate to activate these
safety devices.
•
•
•
AIRBAG DISPOSAL
Contact your authorized dealer as soon as
possible. Airbags must be disposed of by
qualified personnel.
The design of the front airbags is to
activate only in frontal and near-frontal
crashes (not rollovers, side impacts or
rear impacts) unless the crash causes
sufficient longitudinal deceleration.
The design of the safety belt
pretensioners is to activate in frontal
and near-frontal crashes, and may also
activate when a side curtain deploys.
The driver's knee airbag may deploy
based on crash severity and occupant
conditions.
42
Fiesta (CCT)
The design of the side airbags is to
inflate in certain side impact crashes.
Side airbags may activate in other
types of crashes if your vehicle
experiences sufficient sideways motion
or deformation.
The design of the Safety Canopy is to
inflate in certain side impact crashes
or rollover events. The Safety Canopy
may activate in other types of crashes
if your vehicle experiences sufficient
sideways motion or deformation, or a
certain likelihood of rollover.
Keys and Remote Controls
Intelligent Access (If Equipped)
GENERAL INFORMATION ON
RADIO FREQUENCIES
The system uses a radio frequency signal
to communicate with your vehicle and
authorize your vehicle to unlock when one
of the following conditions are met:
• You touch the inside of the front
exterior door handle.
• You press the luggage compartment
button.
• You press a button on the transmitter.
This device complies with Part 15 of the
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference received,
including interference that may cause
undesired operation.
If excessive radio frequency interference
is present in the area or if the transmitter
battery is low, you may need to
mechanically unlock your door. You can
use the mechanical key blade in your
intelligent access key to open the driver
door in this situation. See Remote
Control (page 43).
Note: Changes or modifications not
expressively approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
The term IC before the radio certification
number only signifies that Industry Canada
technical specifications were met.
The typical operating range for your
transmitter is approximately 33 feet (10
meters). Vehicles with the remote start
feature will have a greater range. One of
the following could cause a decrease in
operating range:
• weather conditions
• nearby radio towers
• structures around the vehicle
• other vehicles parked next to your
vehicle
REMOTE CONTROL
Integrated Keyhead Transmitter (If
Equipped)
The radio frequency used by your remote
control can also be used by other short
distance radio transmissions, for example
amateur radios, medical equipment,
wireless headphones, remote controls and
alarm systems. If the frequencies are
jammed, you will not be able to use your
remote control. You can lock and unlock
the doors with the key.
E142585
Use the key blade to start your vehicle and
unlock or lock the driver door from outside
your vehicle. The transmitter portion
functions as the remote control.
Note: Make sure to lock your vehicle before
leaving it unattended.
Note: If you are in range, the remote control
will operate if you press any button
unintentionally.
43
Fiesta (CCT)
Keys and Remote Controls
Reprogramming the Unlocking
Function
Note: When you press the unlock button
either all the doors are unlocked or only the
driver’s door and the liftgate are unlocked.
Pressing the unlock button again unlocks
all the doors.
You can reprogram the unlocking function
using the remote control so that only the
driver's door is unlocked. This will enable
two-stage unlocking.
E162601
Note: Your vehicle’s keys came with a
security label that provides important
vehicle key cut information. Keep the label
in a safe place for future reference.
Press and hold the unlock and lock buttons
on the remote control simultaneously for
at least four seconds with the ignition off.
The direction indicators will flash twice to
confirm the change.
Intelligent Access Transmitter (If
Equipped)
Your intelligent access keys operate the
power locks. The key must be in your
vehicle to activate the push button start
system.
To return to the original unlocking function,
repeat the process.
Replacing the Battery
The intelligent access key also contains a
removable mechanical key blade that you
can use to unlock the driver door.
Note: Refer to local regulations when
disposing of transmitter batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
2
Note: Replacing the battery will not delete
the transmitter from the vehicle. The
transmitter should operate normally.
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
1
E87964
1
Note: Your vehicle’s back-up keys came
with a security tag that provides important
vehicle key cut information. Keep the tag in
a safe place for future reference.
44
Fiesta (CCT)
Keys and Remote Controls
Vehicles without Intelligent Access
3
1
E126281
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
E126152
1.
Insert a screwdriver into the recess on
the back of the key and remove the key
blade.
3. Carefully pry out the battery with the
screwdriver.
4. Install a new battery (3V CR 2032) with
the + facing upward.
5. Assemble the two halves of the remote
control.
6. Install the key blade.
2
Integrated Keyhead Transmitter
E126153
2. Release the retaining clips with the
screwdriver and separate the two
halves of the remote control.
E138619
1.
Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.
2. Remove the old battery.
45
Fiesta (CCT)
Keys and Remote Controls
3
E138620
3. Insert the new battery. Refer to the
instructions inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.
4. Snap the battery cover back onto the
transmitter.
E105362
3. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
Intelligent Access Transmitter
2
1
4
E119190
E87964
4. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
1
1.
Press and hold the buttons on the
edges to release the cover. Carefully
remove the cover.
2. Remove the key blade.
5
E125860
46
Fiesta (CCT)
Keys and Remote Controls
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Carefully remove the battery with the
screwdriver.
6. Install a new battery (3V CR 2032) with
the + facing downward.
7. Assemble the two halves of the remote
control.
8. Install the key blade.
Car Finder
Press the button twice within
three seconds. The horn will
E138623
sound and the turn signals will
flash. We recommend you use this method
to locate your vehicle, rather than using
the panic alarm.
Note: If locking was not successful or if any
door or the liftgate is open, or if the hood is
open on vehicles with a perimeter alarm or
remote start, the horn will sound twice and
the lamps will not flash.
Sounding a Panic Alarm
Note: The panic alarm will only operate
when the ignition is off.
E138624
Press the button to activate the
alarm. Press the button again or
turn the ignition on to deactivate.
REPLACING A LOST KEY OR
REMOTE CONTROL
Replacement or additional keys or remote
controls can be purchased from an
authorized dealer. Your dealer can program
the remote controls for your vehicle or you
may be able to program them yourself.
See Remote Control (page 43).
To re-program the passive anti-theft
system see an authorized dealer.
47
Fiesta (CCT)
MyKey™ (If Equipped)
Non-configurable Settings
PRINCIPLE OF OPERATION
The following settings cannot be changed:
• Belt-minder. You cannot disable this
feature. The audio system will mute
when the front seat occupants' safety
belts are not fastened.
• Low fuel level warning. The low fuel
warning is activated earlier, giving the
MyKey user more time to refuel.
• Driver assist features, if equipped on
your vehicle, are forced on: parking aid,
blind spot information system (BLIS®)
with cross traffic alert, lane departure
warning, Forward collision warning
system.
• Satellite radio adult content
restrictions.
MyKey allows you to program keys with
restricted driving modes to promote good
driving habits. All but one of the keys
programmed to the vehicle can be
activated with these restricted modes.
Any keys that have not been programmed
are referred to as an administrator key or
admin key. These can be used to:
• create a MyKey
• program optional MyKey settings
• clear all MyKey features.
When you have programmed a MyKey, you
can access the following information using
the information display:
• How many admin keys and MyKeys are
programmed to your vehicle.
• The total distance your vehicle has
traveled using any MyKey.
Configurable Settings
You can configure MyKey settings when
you first create a MyKey before you recycle
the key or restart the engine. You can also
change the settings afterward with an
admin key.
Note: All MyKeys are programmed to the
same settings. You cannot program them
individually.
Vehicles with Keyless Entry
These settings can be configured
immediately after a MyKey is first created
or changed afterward with an Admin key
before you recycle the key or restart the
engine:
• Vehicle speed limits can be set.
Warnings will be shown in the display
followed by an audible tone when your
vehicle reaches the set speed. You
cannot override the set speed by fully
depressing the accelerator pedal.
• Vehicle speed minders of 45, 55 or 65
mph (75, 90 or 105 km/h). Once you
select a speed it will be shown in the
display followed by an audible tone
when the set vehicle speed is
exceeded.
If a MyKey and an admin key are present,
your vehicle will recognize the admin key
only.
Note: For vehicles with intelligent access
key (push button start) keyless start, when
both a MyKey and an admin intelligent
access key (fob) are present, the admin fob
will be recognized by the vehicle to start the
engine.
48
Fiesta (CCT)
MyKey™ (If Equipped)
•
•
Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, speed
sensitive compensated (automatic
volume control) feature will be
disabled.
Always on setting. When this is
selected you will not be able to disable
Advance Trac, Emergency Assist or the
do not disturb feature (if your vehicle
is equipped with these features).
5. When prompted, hold the OK button
until you see a message informing you
to label this key as a MyKey. The key
will be restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can program optional settings for the
key(s). Refer to Programming or
Changing Optional Settings.
All MyKeys can be cleared within the same
key cycle in which a MyKey was created,
otherwise an admin key is required to clear
the keys. See Clearing All MyKeys (page
50).
CREATING A MYKEY
Use the information display to create a
MyKey:
Programming or Changing
Optional Settings
Use the information display to access your
optional MyKey settings.
1.
Switch the ignition on using an admin
key. If the vehicle has push button start,
hold an intelligent access admin key
next to the steering column exactly as
shown and switch the ignition on.
2. Access the main menu and select
Settings, then MyKey.
3. Use the arrow buttons to get to an
optional feature.
4. Press OK or the right arrow button to
scroll through settings.
5. Press OK or the right arrow button to
make a selection.
Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created them with either the
MyKey or an admin key. Once you have
switched the engine off, you will need an
admin key to change or clear your MyKey
settings.
E162402
1.
Insert the key you want to program into
the ignition or, if the vehicle has push
button start, hold the intelligent access
key next to the steering column exactly
as shown.
2. Switch the ignition on.
3. Access the main menu on the
information display controls and select
Settings, then MyKey by pressing OK
or the right arrow button.
4. Press OK to select Create MyKey.
49
Fiesta (CCT)
MyKey™ (If Equipped)
CLEARING ALL MYKEYS
Number of Admin Keys
You can clear all MyKeys within the same
key cycle as you created the MyKey. If you
switch your ignition off, however, you will
need to use an admin key to clear your
MyKeys.
Indicates how many admin keys are
programmed to your vehicle. Use this
feature to determine how many
unrestricted keys you have for your vehicle,
and detect if an additional MyKey has been
programmed.
Note: When you clear your MyKeys, you
remove all restrictions and return all MyKeys
to their original admin key status at once.
USING MYKEY WITH REMOTE
START SYSTEMS
To clear all MyKeys of all MyKey settings,
use the information display to do the
following:
MyKey is not compatible with
non-Ford-approved aftermarket remote
start systems. If you choose to install a
remote start system, please see your Ford
authorized dealer for a Ford-approved
remote start system.
1.
Access the main menu and select
Settings, then MyKey.
2. Scroll to Clear All and press the OK
button.
3. Hold the OK button until ALL
MYKEYS CLEARED displays.
The following information MAY help
customers who choose to use a
non-Ford-approved remote start system.
The actions provided below do NOT make
MyKey compatible with
non-Ford-approved remote start system,
but it may help you retain some MyKey
functions.
CHECKING MYKEY SYSTEM
STATUS
You can find information about your
programmed MyKeys by using the
information display.
Vehicles With Ford-approved
Aftermarket Remote Start Systems
When using a Ford-approved aftermarket
remote start system, the vehicle recognizes
the remote start system as an additional
admin key. It is the vehicle’s default setting.
You can also program the remote start as
a MyKey. As a result, the MyKey system
status menu display includes the remote
start system as an additional key in the
total count of MYKEY(S) PROGRAMMED
or ADMIN KEYS PROGRAMMED. See
Checking MyKey System Status (page
50).
MyKey Distance
Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to reset the MyKey distance to zero. If
the distance does not accumulate as
expected, then the intended user is not
using the MyKey, or an admin key user
recently reset the distance.
Number of MyKeys
Indicates the number of MyKeys
programmed to your vehicle. Use this
feature to detect how many MyKeys you
have for your vehicle and determine when
a MyKey has been deleted.
50
Fiesta (CCT)
MyKey™ (If Equipped)
MyKey is not compatible with
non-Ford-approved aftermarket remote
start systems. If you choose to install a
remote start system, please see a Ford
authorized dealer for a Ford-approved
system.
When you start your vehicle with a
Ford-approved aftermarket remote start
system, the system stalls the engine after
you open the door or shift the vehicle into
gear. This is intentional. When you restart
your vehicle, it reads your real key
(traditional key or intelligent key fob)
status instead of the remote start system’s
status.
The following information may help
customers who choose to install a
non-Ford-approved remote start system.
The actions provided below do not make
MyKey compatible with
non-Ford-approved remote start systems,
but may help you retain some MyKey
functions.
As an added precaution, owners of vehicles
equipped with traditional keys may want
to program the remote start system as a
MyKey, if the MyKey driver uses the remote
start fob. That way, when the MyKey driver
starts the vehicle with the remote start
system, the MyKey restrictions remain
active.
When using a non-Ford-approved remote
start system, the vehicle may recognize
the remote start system as an additional
admin key with its associated privileges. If
you restart the engine by inserting a key
into the ignition cylinder and recycling the
ignition completely, then you may retain
some MyKey functions. This action forces
your vehicle to read the traditional key
instead of the remote start fob and then
uses the key's associated privileges.
With a Ford-approved aftermarket remote
start system, it is possible to program all
real keys as MyKeys unintentionally. If this
happens, then the remote start fob is the
admin key. If you want to have only one
real key as a MyKey, or do not want to have
any MyKeys, then you need to use your
remote start to clear all MyKeys. In that
case, follow these steps:
•
•
•
Note: The MyKey system status menu
display may include the remote start system
as an additional key in the total count of
MYKEY(S) PROGRAMMED or ADMIN KEYS
PROGRAMMED. See Checking MyKey
System Status (page 50).
Enter the vehicle and close all doors.
Remote start the vehicle using your
remote start fob.
See Clearing All MyKeys (page 50).
Follow Steps 1-3.
As an added precaution, owners of vehicles
equipped with traditional keys may want
to program the remote start system as a
MyKey, if the MyKey driver uses the remote
start fob. That way, when the MyKey driver
starts the vehicle with the remote start
system, the MyKey restrictions will be
remain active.
After clearing your MyKeys, you can create
a new MyKey. See Creating a MyKey
(page 49).
Note: For vehicles with Intelligent Access
Keys (Push-button Start), you cannot
program the remote start system as a
MyKey. Always treat the remote start fob
as you would any other admin key.
Vehicles With Non-Ford-approved
Aftermarket Remote Start Systems
51
Fiesta (CCT)
MyKey™ (If Equipped)
With a non-Ford-approved aftermarket
remote start system, it is possible to
program all real keys as MyKeys
unintentionally. If this happens, then the
remote start fob is the admin key. If you
want to have only one real key as a MyKey,
or do not want to have any MyKeys, then
you need to use your remote start to clear
all MyKeys. In that case, follow these steps:
•
•
•
Enter the vehicle and close all doors.
Remote start the vehicle using your
non-Ford-approved remote start fob.
See Clearing All MyKeys (page 50).
Follow Steps 1-3.
After clearing your MyKeys, you can create
a new MyKey. See Creating a MyKey
(page 49).
Note: For vehicles with Intelligent Access
Keys (Push-button Start), you cannot
program the remote start system as a
MyKey. Always treat the remote start fob
as you would any other admin key.
MYKEY TROUBLESHOOTING
Condition
Potential Causes
I cannot program a key.
The key in the ignition does not have admin
privileges.
The key in the ignition is the only admin key
(there always has to be at least one admin
key).
The intelligent access key is not in the
correct position (vehicles with push-button
start).
SecuriLock passive anti-theft system is
disabled or in unlimited mode.
The vehicle has been started using a
remote start system that is not
programmed with admin privileges. See
Using MyKey With Remote Start
Systems (page 50).
I cannot program the optional settings.
The key in the ignition does not have admin
privileges.
MyKeys have been created. See Creating
a MyKey (page 49).
The vehicle has been started using a
remote start system that is not
programmed with admin privileges. See
Using MyKey With Remote Start
Systems (page 50).
I cannot clear the restricted keys.
The key in the ignition does not have admin
privileges.
52
Fiesta (CCT)
MyKey™ (If Equipped)
Condition
Potential Causes
No restricted keys are programmed to the
vehicle. See Creating a MyKey (page 49).
The vehicle has been started using a
remote start system that is not
programmed with admin privileges. See
Using MyKey With Remote Start
Systems (page 50).
I lost the only admin key.
Purchase a new key from an authorized
dealer.
I lost a key.
Program a spare key. See Passive AntiTheft System (page 61).
I accidentally programmed all keys as
restricted keys
The vehicle has a remote start system that
is recognized as an admin key. Reset all
restricted keys using remote start. See
Using MyKey With Remote Start
Systems (page 50).
No restricted key functions with intelligent An admin key is present at engine start-up.
access key (push-button start).
No restricted keys are programmed to the
vehicle. See Creating a MyKey (page 49).
Restricted key programmed total includes An unknown key has been programmed to
one additional key.
the vehicle as a restricted key.
Vehicle has a remote start system. See
Using MyKey With Remote Start
Systems (page 50).
Admin keys programmed total includes one An unknown key has been programmed to
additional key.
the vehicle as an admin key.
Vehicle has a remote start system. See
Using MyKey With Remote Start
Systems (page 50).
MyKey distances do not accumulate.
The MyKey user is not using the
programmed MyKey.
An admin key holder reset the MyKey
system.
53
Fiesta (CCT)
Locks
Press the button again within three
seconds to confirm that all the doors are
closed. The doors will lock again, and the
direction indicators will flash twice if all
the doors and the luggage compartment
are closed.
LOCKING AND UNLOCKING
Remote Control
The remote control can be used any time
your vehicle is not running.
Note: If any door or the luggage
compartment is not closed, or if the hood is
not closed on vehicles that have an
anti-theft alarm or remote start, the
direction indicators will not flash.
Unlocking the Doors
Note: You can unlock the driver's door with
the key. Use the key when the remote
control is not functioning.
Note: When you lock your vehicle for
several weeks, the remote control will be
switched off. Your vehicle must be unlocked
and the engine started using the key.
Unlocking and starting your vehicle once will
enable the remote control.
Automatic Re-locking
The doors will relock automatically if you
do not open a door within 45 seconds of
unlocking the doors with the remote
control. The door locks and the alarm will
return to their previous state.
One-Stage Unlocking
Locking and Unlocking the Doors
From Inside
Press the button to unlock all the
doors.
The power door lock control is located on
the instrument panel near the radio.
The direction indicators will flash.
Two-Stage Unlocking
E102566
Press the button to unlock the
driver’s door.
Press the button to lock and
unlock all the doors. The lamp
illuminates with the doors
locked.
Press the button again within three
seconds to unlock all doors.
Locking and Unlocking the Doors
with the Key
The direction indicators will flash.
Note: Do not leave your keys in your vehicle.
Reprogramming the Unlocking
Function
Locking with the Key
You can reprogram the unlocking function
using the remote control to change
between one-stage and two-stage
unlocking. See Remote Control (page
43).
Unlocking with the Key
Turn the top of the key toward the front of
your vehicle.
Turn the top of the key toward the rear of
your vehicle.
Locking the Doors
Press the button to lock all the
doors. The direction indicators
will flash twice.
54
Fiesta (CCT)
Locks
Unlocking the Doors with the
Interior Door Handles
When you lock your vehicle using the
power door lock control (with the door
open, vehicle in park and ignition off), your
vehicle will search for an intelligent access
key in the passenger compartment after
you close the door. If your vehicle finds a
key, all of the doors will immediately
unlock and the horn will chirp, indicating
that a key is inside.
You can unlock individual doors by pulling
the relevant interior door handle. Pulling
the driver's interior door handle will unlock
all the doors, if auto unlock has been
enabled.
Rear Door Unlocking and Opening
Smart Unlocks For Integrated
Keyhead Transmitter
In order to override the smart unlock
feature and intentionally lock the
intelligent access key inside your vehicle,
you can lock your vehicle after all doors
are closed by pressing the lock button on
another intelligent access key or touching
the locking area on the handle with another
intelligent access key in your hand.
This feature helps to prevent you from
locking yourself out of your vehicle if your
key is still in the ignition.
When you open one of the front doors and
lock your vehicle using the power door lock
control, all doors will lock then unlock if:
When you open one of the front doors and
lock your vehicle with the power door lock
control, all the doors will lock then unlock
if your key is still in the ignition.
•
•
You can still lock your vehicle with the key
in the ignition by pressing the lock button
on the transmitter even if the doors are not
closed.
Auto lock and Auto unlock Feature
Pull the interior door release handle twice
to unlock and open the rear door. The first
pull unlocks the door and the second pull
will unlatch the door.
Auto lock
The Auto lock feature will lock the doors
and liftgate when all of the following
conditions have been met:
• All doors are closed.
• The ignition is on.
• Your vehicle is moving at a speed
greater than 12 mph (20 km/h) for
more than two seconds.
If both front doors are closed, you can lock
your vehicle by any method, regardless of
whether the key is in the ignition or not.
Smart Unlocks For Intelligent
Access Keys (If Equipped)
This feature helps to prevent you from
unintentionally locking your intelligent
access key inside your vehicle’s passenger
compartment or rear cargo area.
55
Fiesta (CCT)
the ignition is on, or
the ignition is off and the transmission
is not in P.
Locks
Auto unlock: Press the power door lock
button for longer than two seconds and
release. The horn will chirp once if disabled
or twice (one short and one long chirp) if
enabled.
Auto unlock
The auto unlock feature will unlock all the
doors when all of the following conditions
have been met:
• The ignition is on, all doors are closed,
and your vehicle is moving at a speed
greater than 12 mph (20 km/h) for
more than two seconds.
• Your vehicle has come to a stop and
you switch the ignition off or to the
accessory position.
• The driver's door is opened within 10
minutes of you switching the ignition
off or to the accessory position.
After programming the feature, switch the
ignition off. The horn will chirp once
indicating programming is complete.
Note: You can enable or disable the auto
unlock feature independently of the auto
lock feature.
Emergency Locking with the Key
Note: If the child safety locks are on and
you pull the interior handle, you will only
turn off the emergency locking, not the child
safety lock. You can only open the doors
using the external door handle.
Note: The doors will not auto unlock if your
vehicle has been electronically locked after
the ignition is turned off and before the
driver's door is opened.
Note: If the doors have been unlocked using
this method, the doors must be locked
individually until the central locking function
has been repaired.
Enabling or Disabling Auto lock and
Auto unlock
Note: An authorized dealer can perform this
procedure, or you can perform the procedure
yourself.
Note: When the central locking function
fails to operate, lock the doors individually
using the key in the position shown.
To enable or disable these features, do the
following:
Note: You will have 30 seconds to
complete the procedure.
1. Switch the ignition on.
2. Press the power door lock button three
times.
3. Switch the ignition off.
4. Press the power door lock button three
times.
5. Switch the ignition on. The horn will
chirp indicating your vehicle is in
programming mode.
Auto lock: Press the power door lock
button for less than one second and
release. The horn will chirp once if disabled
or twice (one short and one long chirp) if
enabled.
E112203
56
Fiesta (CCT)
Locks
Left-Hand Side
Opening and Closing the Liftgate
Turn clockwise to lock.
To Open the Liftgate
Right-Hand Side
Turn counterclockwise to lock.
MANUAL LIFTGATE
WARNINGS
It is extremely dangerous to ride in
the cargo area, inside or outside of
your vehicle. In a collision, people
riding in these areas are more likely to be
seriously injured or killed. Do not allow
people to ride in any area of your vehicle
that does not have seats and safety belts.
Make sure everyone in your vehicle is in a
seat and using a safety belt correctly.
E138632
Press the button located in the top of the
liftgate pull cup handle to unlatch the
liftgate, then pull on the outside handle.
Opening With the Remote Control
Make sure that the liftgate is closed
to prevent exhaust fumes from being
drawn into your vehicle. This will also
prevent passengers and cargo from falling
out. If you must drive with the liftgate door
open, keep your vehicle well ventilated so
outside air does not enter your vehicle.
Press the button twice within
three seconds.
To Close the Liftgate
Note: Be careful when opening or closing
the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.
Note: Do not hang anything (bike rack, etc.)
from the spoiler, glass or liftgate. This could
damage the liftgate and its components.
Note: Do not leave the liftgate open while
driving. This could damage the liftgate and
its components.
E89132
A recessed grip is located inside the liftgate
to help with closing.
57
Fiesta (CCT)
Locks
Passive Key
KEYLESS ENTRY
Your vehicle can be locked and unlocked
with the passive key. You can use the
passive key as a remote control. See
Locking and Unlocking (page 54).
General Information
WARNING
The system may not function if the
key is close to metal objects or
electronic devices such as cell
phones.
Locking Your Vehicle
The system will not function if:
• Your vehicle battery has no charge.
• The passive key frequencies are
jammed.
• The passive key battery has no charge.
Note: If the system does not function, you
will need to use the key blade to lock and
unlock your vehicle.
E87384
The system allows you to operate your
vehicle without the use of a key or remote
control.
WARNING
Your vehicle does not lock itself
automatically. If you do not press a
locking button your vehicle will
remain unlocked.
Locking buttons are located on each of the
front doors.
For central locking and to arm the alarm,
press a locking button once.
For double locking and to arm the alarm,
press a locking button twice within three
seconds.
E78276
Passive locking and unlocking requires a
valid passive key to be located within one
of the three external detection ranges.
These are located approximately five feet
(one and a half meters) from the front
door handles and the liftgate.
Note: Your vehicle will remain locked for
approximately three seconds. When the
delay period is over, you can open the doors
again, provided the passive key is within the
respective detection range.
Two short flashes of the direction
indicators confirms that all the doors and
the liftgate have been locked and that the
alarm has been armed.
58
Fiesta (CCT)
Locks
Liftgate
Unlocking Only the Driver's Door
Note: The liftgate cannot be closed and
will pop back up if the passive key is located
inside the luggage compartment with the
doors locked.
If the unlocking function is reprogrammed
so that only the driver’s door and the
liftgate are unlocked. See Remote
Control (page 43). Note the following:
Note: If a second valid passive key is
located within the liftgate detection range,
the liftgate can be closed.
If the driver’s door is the first door which is
opened, the other doors will remain locked.
All the other doors can be unlocked from
inside your vehicle by pressing the unlock
button on the instrument panel.
Unlocking Your Vehicle
Note: When your vehicle remains locked
for longer than three days, the system will
enter an energy-saving mode. This is to
prevent your vehicle battery running out of
charge. When your vehicle is unlocked while
in this mode, the reaction time of the system
may be a little longer than normal. To exit
the energy-saving mode, unlock your
vehicle.
Disabled Keys
Any keys left inside your vehicle interior
when it is locked will be disabled.
You cannot use a disabled key to switch
the ignition on or start the engine.
You must enable all passive keys again in
order to use them.
To enable all your passive keys, unlock your
vehicle using a passive key or the remote
control unlocking function.
All passive keys will then be enabled if you
switch the ignition on or you start your
vehicle with a valid key.
Locking and Unlocking the Doors
With the Key Blade
2
E87384
Press a locking button once.
Note: A valid passive key must be located
within the detection range of that door.
1
One long flash of the direction indicators
confirms that all the doors and the liftgate
have been unlocked and that the alarm
has been disarmed.
E87964
1.
59
Fiesta (CCT)
1
Carefully remove the cover.
Locks
2. Remove the key blade and insert it into
the lock.
Note: Only the driver's door handle has a
lock cylinder.
INTERIOR LUGGAGE
COMPARTMENT RELEASE (IF
EQUIPPED)
WARNINGS
Keep vehicle doors and luggage
compartment locked and keep keys
and remote transmitters out of a
child’s reach. Unsupervised children could
lock themselves in the trunk and risk injury.
Children should be taught not to play in
vehicles.
Do not leave children, unreliable
adults, or animals unattended in the
vehicle. On hot days, the
temperature in the trunk or vehicle interior
can rise very quickly. Exposure of people
or animals to these high temperatures for
even a short time can cause death or
serious heat-related injuries, including brain
damage. Small children are particularly at
risk.
E144403
The handle is located inside the luggage
compartment either on the luggage
compartment door (lid) or near the tail
lamps. It is composed of a material that
will glow for hours in darkness following
brief exposure to ambient light.
Your vehicle is equipped with a release
handle that provides a means of escape
for children and adults if they become
locked inside the luggage compartment.
Pull the handle and push up on the luggage
compartment door (lid) to open from
within the luggage compartment.
Adults should familiarize themselves with
the operation and location of the release
handle.
60
Fiesta (CCT)
Security
Replacement Keys
PASSIVE ANTI-THEFT
SYSTEM
Note: Your vehicle comes equipped with
two integrated keyhead transmitters or two
intelligent access keys.
Note: The system is not compatible with
non-Ford aftermarket remote start systems.
Use of these systems may result in vehicle
starting problems and a loss of security
protection.
The integrated keyhead transmitter
functions as a programmed ignition key
that operates all the locks and starts the
vehicle, as well as a remote control.
Note: Metallic objects, electronic devices
or a second coded key on the same key
chain may cause vehicle starting problems
if they are too close to the key when starting
the engine. Prevent these objects from
touching the coded key while starting the
engine. Switch the ignition off, move all
objects on the key chain away from the
coded key and restart the engine if a
problem occurs.
The intelligent access key functions as a
programmed key that operates the driver
door lock and activates the intelligent
access with push button start system, as
well as a remote control.
If your programmed transmitters or
standard SecuriLock coded keys
(integrated keyhead transmitters only) are
lost or stolen and you do not have an extra
coded key, you will need to have your
vehicle towed to an authorized dealer. You
need to erase the key codes from your
vehicle and program new coded keys.
Note: Do not leave a duplicate coded key
in the vehicle. Always take your keys and
lock all doors when leaving the vehicle.
SecuriLock®
Store an extra programmed key away from
the vehicle in a safe place to help prevent
any inconveniences. See your authorized
dealer to purchase additional spare or
replacement keys.
The system is an engine immobilization
system. It is designed to help prevent the
engine from being started unless a coded
key programmed to your vehicle is used.
Using the wrong key may prevent the
engine from starting. A message may
appear in the information display.
Programming a Spare Integrated
Keyhead Transmitter
Note: You can program a maximum of eight
coded keys to your vehicle. All eight can be
integrated keyhead transmitters.
If you are unable to start the engine with a
correctly coded key, a malfunction has
happened and a message may appear in
the information display.
You can program your own integrated
keyhead transmitter or standard
SecuriLock coded keys to your vehicle. This
procedure will program both the engine
immobilizer keycode and the remote entry
portion of the remote control to your
vehicle
Automatic Arming
The vehicle arms immediately after you
switch the ignition off.
Automatic Disarming
Only use integrated keyhead transmitters
or standard SecuriLock keys.
Switching the ignition on with a coded key
disarms the vehicle.
61
Fiesta (CCT)
Security
You must have two previously
programmed coded keys and the new
unprogrammed key readily accessible. See
your authorized dealer to have the spare
key programmed if two previously
programmed coded keys are not available.
Programming a Spare Intelligent
Access Key
See your authorized dealer to have
additional keys programmed to your
vehicle.
Read and understand the entire procedure
before you begin.
ANTI-THEFT ALARM
1.
Alarm System
2.
3.
4.
5.
6.
7.
8.
9.
Insert the first previously programmed
coded key into the ignition.
Switch the ignition from off to on. Keep
the ignition on for at least three
seconds, but no more than 10 seconds.
Switch the ignition off and remove the
first coded key from the ignition.
After three seconds but within 10
seconds of switching the ignition off,
insert the second previously coded key
into the ignition.
Switch the ignition from off to on. Keep
the ignition on for at least three
seconds, but no more than 10 seconds.
Switch the ignition off and remove the
second previously programmed coded
key from the ignition.
After three seconds but within 10
seconds of switching the ignition off
and removing the previously
programmed coded key, insert the new
unprogrammed key into the ignition.
Switch the ignition from off to on. Keep
the ignition on for at least six seconds.
Remove the newly programmed coded
key from the ignition.
The perimeter alarm is a deterrent against
unauthorized access to your vehicle
through the doors and the hood. It also
protects the audio unit.
Triggering the Alarm
Once armed, the alarm is triggered in any
of the following ways:
•
•
•
If the alarm is triggered, the alarm horn will
sound for 30 seconds and the hazard
warning flasher will flash for five minutes.
Any further attempts to perform one of the
above will trigger the alarm again.
Arming the Alarm
To arm the alarm, lock your vehicle. See
Locks (page 54).
If the key has been successfully
programmed it will start the engine and
operate the remote entry system (if the
new key is an integrated keyhead
transmitter).
Disarming the Alarm
Vehicles Without Keyless Entry
Disarm and silence the alarm by unlocking
the doors with the key and switching the
ignition on with a correctly coded key or
unlocking the doors with the remote
control.
If programming was not successful, wait
10 seconds and repeat Steps 1 through 8.
If you are still unsuccessful, take your
vehicle to your authorized dealer.
62
Fiesta (CCT)
If someone opens a door, the liftgate
or the hood without a valid key or
remote control.
If someone removes the audio or
navigation system.
If you switch the ignition on without a
valid key.
Security
Vehicles with Keyless Entry
Note: A valid passive key must be located
within the detection range of that door for
keyless entry. See Keyless Entry (page 58).
Disarm and silence the alarm by unlocking
the doors and switching the ignition on or
unlocking the doors with the remote
control.
63
Fiesta (CCT)
Steering Wheel
ADJUSTING THE STEERING
WHEEL
WARNING
Do not adjust the steering wheel
when your vehicle is moving.
Note: Make sure that you are sitting in the
correct position. See Sitting in the Correct
Position (page 106).
3
E95179
2
3. Lock the steering column.
AUDIO CONTROL (IF EQUIPPED)
Select the required source on the audio
unit.
1
You can operate the following functions
with the control:
2
A
E95178
1. Unlock the steering column.
2. Adjust the steering wheel to the desired
position.
B
D
C
E141530
64
Fiesta (CCT)
A
Volume up
B
Seek up, next or end call
Steering Wheel
C
Volume down
D
Seek down, previous or accept
call
CRUISE CONTROL (IF EQUIPPED)
Seek, Next or Previous
Press the seek button to:
• tune the radio to the next or previous
stored preset
• play the next or the previous track.
Press and hold the seek button to:
• tune the radio to the next station up or
down the frequency band
• seek through a track.
E141961
See Cruise Control (page 142).
VOICE CONTROL (IF EQUIPPED)
E141533
Press the button to select or deselect voice
control. See SYNC™ (page 257).
65
Fiesta (CCT)
Wipers and Washers
Intermittent Wipe
WINDSHIELD WIPERS
Note: Fully defrost the windshield before
switching on the windshield wipers.
A
B
Note: Make sure the windshield wipers are
switched off before entering a car wash.
Note: Install new wiper blades as soon as
they begin to leave bands of water and
smears on the windshield.
Note: Do not operate the wipers on a dry
windshield. This may scratch the glass,
damage the wiper blades or cause the wiper
motor to burn out. Always use the
windshield washers before wiping a dry
windshield.
C
E102033
D
C
A
Short wipe interval
B
Intermittent wipe
C
Long wipe interval
Use the rotary control to adjust the
intermittent wipe interval.
B
Speed Dependent Wipers
When your vehicle speed increases, the
interval between wipes will decrease.
WINDSHIELD WASHERS
A
Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
E102032
A
Single wipe
B
Intermittent wipe
C
Normal wipe
D
High speed wipe
Note: If you press and hold the wiper lever
in position A, the wipers will continue to
wipe until you release the wiper lever.
E102051
Push the button to operate the washers.
They will operate for a maximum of 10
seconds. When you release the button, the
wipers will operate for a short time.
66
Fiesta (CCT)
Wipers and Washers
REAR WINDOW WIPER AND
WASHERS
Intermittent Wipe
E102053
Pull the lever toward you to operate the
washers. They will operate for a maximum
of 10 seconds. When you release the lever,
the wiper will operate for a short time.
E102052
Pull the lever toward you.
Reverse Gear Wipe
The rear wiper will turn on automatically
when selecting reverse gear if:
• the rear wiper is not already switched
on
• the wiper lever is in position A, B, C or
D
• the front wiper is operating (when set
to position B).
Rear Window Washer
Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
67
Fiesta (CCT)
Lighting
GENERAL INFORMATION
LIGHTING CONTROL
Condensation in Lamp Assemblies
Lighting Control Positions
Exterior lamps have vents to
accommodate normal changes in air
pressure.
A
B
C
Condensation can be a natural by-product
of this design. When moist air enters the
lamp assembly through the vents, there is
a possibility that condensation can occur
when the temperature is cold. When
normal condensation occurs, a fine mist
can form on the interior of the lens. The
fine mist eventually clears and exits
through the vents during normal operation.
Clearing time may take as long as 48 hours
under dry weather conditions.
Examples of acceptable condensation are:
• The presence of a fine mist (no streaks,
drip marks or large droplets).
• A fine mist covers less than 50% of the
lens.
E156651
A
Off
B
Parking lamps, instrument panel
lamps, license plate lamps and
tail lamps
C
Headlamps
Examples of unacceptable condensation
are:
• A water puddle inside the lamp.
• Streaks, drip marks or large droplets
present on the interior of the lens.
Parking Lamps
If you see any unacceptable condensation,
have your vehicle checked by an authorized
dealer.
Note: Prolonged use of the parking lamps
when the ignition is off will cause the battery
to run out of charge.
To operate the parking lamps turn the
lighting control to position B. The parking
lamps operate with the ignition on or off.
68
Fiesta (CCT)
Lighting
High Beams
E101829
Pull the lever fully toward you to switch
the high beams on.
E158778
Pull the lever fully toward you again to
switch the high beams off.
The headlamps will switch on and off
automatically in low light situations or
during inclement weather.
Headlamp Flasher
Pull the lever toward you slightly and
release it to flash the headlamps.
INSTRUMENT LIGHTING
DIMMER
AUTOLAMPS (IF EQUIPPED)
Note: It may be necessary to switch your
headlamps on manually in severe weather
conditions.
Note: If you have autolamps on, you can
only switch the high beam on once
autolamps has switched the headlamps on.
E156652
69
Fiesta (CCT)
Lighting
FRONT FOG LAMPS (IF EQUIPPED)
HEADLAMP EXIT DELAY
After you switch the ignition off, you can
switch the headlamps on by pulling the
direction indicator lever toward you. You
will hear a short tone. The headlamps will
switch off automatically after three
minutes with any door open or 30 seconds
after the last door has been closed. You
can cancel this feature by pulling the
direction indicator toward you again or
switching the ignition on.
DAYTIME RUNNING LAMPS (IF
EQUIPPED)
WARNING
E156823
Always remember to switch your
headlamps on in low light situations
or during inclement weather. The
system does not turn on the tail lamps and
may not provide adequate lighting during
these conditions. Failure to switch the
headlamps on under these conditions may
result in a collision.
Pull the control to switch the fog lamps on
or off.
You cannot switch the fog lamps on when
the lighting control is in the off or
autolamps position.
DIRECTION INDICATORS
The system switches the headlamps on in
daylight conditions.
To switch the system on:
1. Switch the ignition on.
2. Turn the lighting control to the off,
autolamp or parking lamp position.
3. Make sure the transmission selector
lever is not in position P.
E102016
Push the lever up or down to use the
direction indicators.
Note: Tap the lever up or down to make the
direction indicators flash three times to
indicate a lane change.
70
Fiesta (CCT)
Lighting
Rear Interior Lamps (If Equipped)
INTERIOR LAMPS
Front Interior Lamps
A
B
C
C
E156879
E156878
A
Door contact
B
Off
C
Reading lamps
Press to switch individual lamps on and
off.
AMBIENT LIGHTING (IF EQUIPPED)
If you set the switch to position A, the
courtesy lamp will illuminate when you
unlock or open a door or the liftgate. If you
leave a door open with the ignition
switched off, the courtesy lamp will go off
automatically after some time to prevent
your vehicle battery from losing charge. To
switch it back on, switch the ignition on for
a short time.
The ambient lighting system illuminates
the interior with a choice of several colors.
The ambient lighting control is located on
the instrument panel.
The courtesy lamp will also illuminate
when you switch the ignition off. It will go
off automatically after a short time or
when you start the engine.
Reading Lamps
If you switch the ignition off, the reading
lamps will go off automatically after some
time to prevent your vehicle battery from
losing charge. To switch them back on,
switch the ignition on for a short time.
E158830
Press and release the switch to
cycle through the color choices
and the off condition.
71
Fiesta (CCT)
Lighting
The ambient lighting will switch on when
the following conditions have been met:
• You switch the ignition on.
• You switch the headlamps on.
• The exterior ambient light level is low.
The ambient lighting will remain on until
you switch the ignition off and one of the
following conditions have been met:
• You lock your vehicle.
• The accessory delay timer expires.
72
Fiesta (CCT)
Windows and Mirrors
Window Lock
POWER WINDOWS (IF EQUIPPED)
WARNINGS
Do not leave children unattended in
your vehicle and do not let them play
with the power windows. They may
seriously injure themselves.
When closing the power windows,
you should verify they are free of
obstructions and make sure that
children and pets are not in the proximity
of the window openings.
E70850
Press the control to lock or unlock the rear
window controls. It will illuminate when
the rear window controls are locked.
Bounce-Back (If Equipped)
The window will stop automatically while
closing. It will reverse some distance if
there is an obstacle in the way.
Overriding the Bounce-Back Feature
WARNING
E70848
When you override the bounce-back
feature the window will not reverse
if it detects an obstacle. Take care
when closing the windows to avoid
personal injury or damage to your vehicle.
Note: You may hear a pulsing noise when
just one of the windows is open. Lower the
opposite window slightly to reduce this
noise.
Press the switch to open the window.
Lift the switch to close the window.
Proceed as follows to override this
protection feature when there is a
resistance, for example in winter:
One-Touch Down (If Equipped)
1.
Press the switch fully and release it. Press
again or lift it to stop the window.
One-Touch Up (If Equipped)
Lift the switch fully and release it. Press or
lift it again to stop the window.
73
Fiesta (CCT)
Close the window twice until it reaches
the point of resistance and let it
reverse.
Windows and Mirrors
2. Close the window a third time to the
point of resistance. The bounce-back
feature is now disabled and you can
close the window manually. The
window will go past the point of
resistance and you can close it fully.
GLOBAL OPENING AND
CLOSING (IF EQUIPPED)
You can also operate the power windows
with the ignition off using the global
opening and global closing function.
See an authorized dealer as soon as
possible if the window does not close after
the third attempt.
Note: Global opening will only operate for
a short period of time after you have
unlocked your vehicle using the remote
control.
Resetting the Bounce-Back Feature
Note: Global closing will only operate if you
have set the memory correctly for each
window. See Power Windows (page 73).
WARNING
The bounce-back feature remains
turned off until you reset the
memory.
Global Opening
If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.
1.
2.
3.
4.
5.
6.
7.
8.
Lift and hold the switch until the
window is fully closed.
Release the switch.
Lift the switch again for one more
second.
Press and hold the switch until the
window is fully open.
Release the switch.
Lift and hold the switch until the
window is fully closed.
Open the window and then try to close
it automatically.
Reset and repeat the procedure if the
window does not close automatically.
E71955
To open all the windows:
1.
Press and release the remote control
unlock button.
2. Press and hold the remote control
unlock button for at least three
seconds.
Accessory Delay (If Equipped)
Press the lock or unlock button to stop the
opening function.
You can use the window switches for
several minutes after you have switched
the ignition off or until either front door is
opened.
74
Fiesta (CCT)
Windows and Mirrors
Global Closing
WARNING
Take care when using global closing.
In an emergency, touch a door
handle lock sensor to stop.
Vehicles Without Keyless Entry
WARNING
Take care when using global closing.
In an emergency, press the lock or
unlock button immediately to stop.
Note: Global closing can be switched on
using the driver’s door handle. Global
opening and closing can also be switched
on using the buttons on the passive key.
To close all the windows, press and hold
the driver’s door handle for at least three
seconds. The bounce-back function is also
on during global closing.
EXTERIOR MIRRORS
Power Exterior Mirrors
WARNING
Do not adjust the mirrors when your
vehicle is moving. This could result
in the loss of control of your vehicle,
serious personal injury or death.
E71956
To close all the windows, press and hold
the remote control lock button for at least
three seconds. Press the lock or unlock
button to stop the closing function. The
bounce-back function is also on during
global closing.
B
C
A
Vehicles With Keyless Entry
E71280
E87384
75
Fiesta (CCT)
A
Left-hand mirror
B
Off
C
Right-hand mirror
Windows and Mirrors
C
E71281
Move the controller in the direction of the
arrows to adjust the mirror.
Fold-Away Exterior Mirrors
B
Push the mirror toward the door window
glass. Make sure that you fully engage the
mirror in its support when returning it to its
original position.
A
Integrated Blind Spot Mirrors (If
Equipped)
E138665
WARNING
The image of the approaching vehicle is
small and near the inboard edge of the
main mirror when it is at a distance. The
image becomes larger and begins to move
outboard across the main mirror as the
vehicle approaches (A). The image will
transition from the main mirror and begin
to appear in the blind spot mirror as the
vehicle approaches (B). The vehicle will
transition to your peripheral field of view
as it leaves the blind spot mirror (C).
Objects in the blind spot mirror are
closer than they appear.
Blind spot mirrors have an integrated
convex mirror built into the upper outboard
corner of the exterior mirrors. They are
designed to increase your visibility along
the side of your vehicle.
Check the main mirror first before a lane
change, then check the blind spot mirror.
If no vehicles are present in the blind spot
mirror and the traffic in the adjacent lane
is at a safe distance, signal that you intend
to change lanes. Glance over your shoulder
to verify traffic is clear and carefully
change lanes.
INTERIOR MIRROR
WARNING
Do not adjust the mirror when your
vehicle is moving.
76
Fiesta (CCT)
Windows and Mirrors
Note: Do not clean the housing or glass of
any mirror with harsh abrasives, fuel or other
petroleum or ammonia-based cleaning
products.
You can adjust the interior mirror to your
preference. Some mirrors also have a
second pivot point. This lets you move the
mirror head up or down and from side to
side.
Pull the tab below the mirror toward you
to reduce glare at night.
Auto-Dimming Mirror (If Equipped)
E156620
Note: Do not block the sensors on the front
and back of the mirror. Mirror performance
may be affected. A rear center passenger or
raised rear center head restraint may also
block light from reaching the sensor.
Opening and Closing the Moonroof
Press and release the rear of the SLIDE
control to open the moonroof. The sliding
shade will automatically open, if closed,
while the moonroof opens.
The mirror will dim automatically to reduce
glare when bright lights are detected from
behind your vehicle. It will automatically
return to normal reflection when you select
reverse gear to make sure you have a clear
view when backing up.
Press and hold the front of the SLIDE
control to close the moonroof.
Note: The sliding shade will not
automatically close.
Moonroof Sliding Shade
MOONROOF (IF EQUIPPED)
You can manually open or close the sliding
shade when the moonroof is closed. Slide
the shade backward or forward to open or
close it.
WARNINGS
Do not allow people to play with the
moonroof. Becoming trapped in a
moonroof may result in serious injury
or death.
Venting the Moonroof
Press and hold the rear of the TILT control
to vent the moonroof.
You must make sure the moonroof
is free of any obstruction when
closing. Becoming trapped in a
moonroof may result in serious injury or
death.
Press and hold the front of the TILT
control to close the moonroof.
The moonroof controls are located on the
overhead console.
77
Fiesta (CCT)
Instrument Cluster
GAUGES
A
B
E
C
D
E102660
A
Tachometer
B
Information display and engine coolant temperature gauge
C
Speedometer
D
Fuel gauge
E
Tripmeter reset button
Fuel Gauge
Engine Coolant Temperature
Gauge
Switch the ignition on. The fuel gauge will
indicate approximately how much fuel is
left in the fuel tank. The fuel gauge may
vary slightly when your vehicle is moving
or on a gradient. The arrow adjacent to the
fuel pump symbol indicates on which side
of your vehicle the fuel filler door is located.
E140760
Displays the temperature of the engine
coolant. At normal operating temperature
the indicator will remain in the center
section.
78
Fiesta (CCT)
Instrument Cluster
WARNING LAMPS AND
INDICATORS
WARNING
Driving your vehicle with the warning
lamp on is dangerous. A significant
decrease in braking performance
may occur. It will take you longer to stop
your vehicle. Have your vehicle checked by
your authorized dealer immediately. Driving
extended distances with the parking brake
engaged can cause brake failure and the
risk of personal injury.
The following warning lamps and
indicators will alert you to a vehicle
condition that may become serious. Some
lamps will illuminate when you start your
vehicle to make sure they work. If any
lamps remain on after starting your vehicle,
refer to the respective system warning
lamp for further information.
Cruise Control Indicator
Note: Some warning indicators appear in
the information display and function the
same as a warning lamp but do not display
when you start your vehicle.
E71340
Anti-lock Braking System Warning
Lamp
It will illuminate when you switch
this feature on. See Using
Cruise Control (page 142).
Direction Indicator
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
to have the normal braking system
(without anti-lock braking system) unless
the brake system warning lamp is also
illuminated. Have your vehicle checked by
an authorized dealer.
Illuminates when the left or right
turn signal or the hazard warning
flasher is turned on. If the
indicators stay on or flash faster, check for
a burnt out bulb. See Changing a Bulb
(page 195).
Brake System Warning Lamp
Illuminates when you switch the
ignition on and remains on if any
door, the hood or the liftgate is
not closed properly.
E138644
Door Ajar Warning Lamp
It will illuminate when you
engage the parking brake with
the ignition on.
Engine Coolant Temperature
Warning Lamp
If it illuminates when you are driving, check
that the parking brake is not engaged. If
the parking brake is not engaged, this
indicates low brake fluid level or a brake
system malfunction. Have your vehicle
checked immediately by an authorized
dealer.
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by a an authorized dealer immediately.
79
Fiesta (CCT)
Instrument Cluster
If it stays on after starting or
illuminates when driving, this
indicates a malfunction. Stop
your vehicle as soon as it is safe to do so
and switch the engine off. Check the
coolant level. See Engine Coolant Check
(page 183).
WARNING
Have this checked immediately.
If both lamps illuminate together, stop your
vehicle as soon as it is safe to do so
(continued use may cause reduced power
and cause the engine to stop). Switch the
ignition off and attempt to restart the
engine. If the engine restarts have your
vehicle checked by an authorized dealer
immediately. When the engine does not
restart have your vehicle checked before
continuing your journey.
Engine Oil Warning Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by an authorized dealer immediately.
Front Airbag Warning Lamp
If it illuminates with the engine
running or when you are driving,
this indicates a malfunction.
Stop your vehicle as soon as it is safe to
do so and switch the engine off. Check the
engine oil level. See Engine Oil Check
(page 182).
If it fails to illuminate when you
start your vehicle, continues to
flash or remains on, it indicates
a malfunction. Have your vehicle checked
by an authorized dealer.
Front Fog Lamps Indicator
Engine Warning Lamps
It will illuminate when you switch
the front fog lamps on.
Malfunction Indicator Lamp
Headlamp Indicator
Powertrain Warning Lamp
It will illuminate when you switch
the headlamp dipped beam or
the side and tail lamps on.
All Vehicles
High Beam Indicator
If either lamp illuminates when the engine
is running, this indicates a malfunction. The
engine will continue to run but it may have
limited power. If it flashes when you are
driving, reduce the speed of your vehicle
immediately. If it continues to flash, avoid
heavy acceleration or deceleration. Have
your vehicle checked by an authorized
dealer immediately.
It will illuminate when you switch
the high beam headlamps on. It
will flash when you use the
headlamp flasher.
80
Fiesta (CCT)
Instrument Cluster
Ignition Warning Lamp
Service Engine Soon
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
equipment. Have your vehicle checked by
an authorized dealer immediately.
If it remains illuminated after you
start the engine, it indicates that
the on board diagnostics system
has detected a malfunction to the
emissions control system. See Emission
Control System (page 123).
Information Indicator
If it flashes, engine misfire is occurring
which could damage your catalytic
converter. Drive in a moderate fashion
(avoid heavy acceleration and
deceleration) and have your vehicle
serviced immediately.
It will illuminate when a new
message is stored in the
information display. See
Information Messages (page 90).
Low Fuel Level Warning Lamp
Note: Under engine misfire conditions,
excessive exhaust temperatures could
damage the catalytic converter or other
vehicle components.
If it illuminates, refuel as soon as
possible.
The service engine soon indicator light
illuminates when you switch the ignition
on prior to engine start to check the bulb
and to indicate whether your vehicle is
ready for inspection maintenance testing.
Low Tire Pressure Warning
It will illuminate when your tire
pressure is low. If the lamp
remains on with the engine
running or when driving, check
your tire pressure as soon as possible.
Normally, the lamp will remain on until the
engine is cranked, then turn itself off if a
malfunction is not present. However, if
after 15 seconds the lamp flashes eight
times, it means that your vehicle is not
ready for inspection maintenance testing.
See Emission Control System (page 123).
It will also illuminate momentarily when
you switch the ignition on to confirm the
lamp is functional. If it does not illuminate
when you switch the ignition on, or begins
to flash at any time, have your vehicle
checked by an authorized dealer.
Shift Indicator
It will illuminate to inform you
that shifting to a higher gear may
give better fuel economy and
lower CO2 emissions. It will not illuminate
during periods of high acceleration, braking
or when the clutch pedal is pressed.
Safety Belt Minder Warning Lamp
It will illuminate and a chime will
sound to remind you to fasten
your safety belt. See Safety
Belt Minder (page 30).
81
Fiesta (CCT)
Instrument Cluster
Brake System Warning Lamp
Stability Control Indicator
While driving, it flashes when the
system is operating. After you
switch the ignition on, if it does
not illuminate or illuminates continuously
while driving, this indicates a malfunction.
During a malfunction, the system switches
off. Have your vehicle checked by an
authorized dealer as soon as possible.
E138644
If it illuminates when you are driving, check
that the parking brake is not engaged. If
the parking brake is not engaged, this
indicates low brake fluid level or a brake
system malfunction. Have your vehicle
checked immediately by an authorized
dealer.
It will illuminate when you switch the
system off. It will go out when you switch
the system back on or when you switch the
ignition off.
WARNING
Driving your vehicle with the warning
lamp on is dangerous. A significant
decrease in braking performance
may occur. It will take you longer to stop
your vehicle. Have your vehicle checked by
your authorized dealer immediately. Driving
extended distances with the parking brake
engaged can cause brake failure and the
risk of personal injury.
WARNING LAMPS AND
INDICATORS - 1.6L
ECOBOOST™
The following warning lamps and
indicators will alert you to a vehicle
condition that may become serious. Some
lamps will illuminate when you start your
vehicle to make sure they work. If any
lamps remain on after starting your vehicle,
refer to the respective system warning
lamp for further information.
Cruise Control Indicator
E71340
Note: Some warning indicators appear in
the information display and function the
same as a warning lamp but do not display
when you start your vehicle.
It will illuminate when you switch
this feature on. See Using
Cruise Control (page 142).
Direction Indicator
Illuminates when the left or right
turn signal or the hazard warning
flasher is turned on. If the
indicators stay on or flash faster, check for
a burnt out bulb. See Changing a Bulb
(page 195).
Anti-lock Braking System Warning
Lamp
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
to have the normal braking system
(without anti-lock braking system) unless
the brake system warning lamp is also
illuminated. Have your vehicle checked by
an authorized dealer.
Door Ajar Warning Lamp
Illuminates when you switch the
ignition on and remains on if any
door, the hood or the liftgate is
not closed properly.
82
Fiesta (CCT)
It will illuminate when you
engage the parking brake with
the ignition on.
Instrument Cluster
Engine Coolant Temperature
Warning Lamp
All Vehicles
If either lamp illuminates when the engine
is running, this indicates a malfunction. The
engine will continue to run but it may have
limited power. If it flashes when you are
driving, reduce the speed of your vehicle
immediately. If it continues to flash, avoid
heavy acceleration or deceleration. Have
your vehicle checked by an authorized
dealer immediately.
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by a an authorized dealer immediately.
If it stays on after starting or
illuminates when driving, this
indicates a malfunction. Stop
your vehicle as soon as it is safe to do so
and switch the engine off. Check the
coolant level. See Engine Coolant Check
(page 183).
WARNING
Have this checked immediately.
If both lamps illuminate together, stop your
vehicle as soon as it is safe to do so
(continued use may cause reduced power
and cause the engine to stop). Switch the
ignition off and attempt to restart the
engine. If the engine restarts have your
vehicle checked by an authorized dealer
immediately. When the engine does not
restart have your vehicle checked before
continuing your journey.
Engine Oil Warning Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by an authorized dealer immediately.
If it illuminates with the engine
running or when you are driving,
this indicates a malfunction.
Stop your vehicle as soon as it is safe to
do so and switch the engine off. Check the
engine oil level. See Engine Oil Check
(page 182).
Front Airbag Warning Lamp
Engine Warning Lamps
Front Fog Lamps Indicator
If it fails to illuminate when you
start your vehicle, continues to
flash or remains on, it indicates
a malfunction. Have your vehicle checked
by an authorized dealer.
Malfunction Indicator Lamp
It will illuminate when you switch
the front fog lamps on.
Powertrain Warning Lamp
Headlamp Indicator
It will illuminate when you switch
the headlamp dipped beam or
the side and tail lamps on.
83
Fiesta (CCT)
Instrument Cluster
High Beam Indicator
Service Engine Soon
It will illuminate when you switch
the high beam headlamps on. It
will flash when you use the
headlamp flasher.
If it remains illuminated after you
start the engine, it indicates that
the on board diagnostics system
has detected a malfunction to the
emissions control system. See Emission
Control System (page 123).
Ignition Warning Lamp
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
equipment. Have your vehicle checked by
an authorized dealer immediately.
If it flashes, engine misfire is occurring
which could damage your catalytic
converter. Drive in a moderate fashion
(avoid heavy acceleration and
deceleration) and have your vehicle
serviced immediately.
Information Indicator
Note: Under engine misfire conditions,
excessive exhaust temperatures could
damage the catalytic converter or other
vehicle components.
It will illuminate when a new
message is stored in the
information display. See
Information Messages (page 90).
The service engine soon indicator light
illuminates when you switch the ignition
on prior to engine start to check the bulb
and to indicate whether your vehicle is
ready for inspection maintenance testing.
Low Fuel Level Warning Lamp
If it illuminates, refuel as soon as
possible.
Normally, the lamp will remain on until the
engine is cranked, then turn itself off if a
malfunction is not present. However, if
after 15 seconds the lamp flashes eight
times, it means that your vehicle is not
ready for inspection maintenance testing.
See Emission Control System (page 123).
Low Tire Pressure Warning
It will illuminate when your tire
pressure is low. If the lamp
remains on with the engine
running or when driving, check
your tire pressure as soon as possible.
Shift Indicator
It will illuminate to inform you
that shifting to a higher gear may
give better fuel economy and
lower CO2 emissions. It will not illuminate
during periods of high acceleration, braking
or when the clutch pedal is pressed.
It will also illuminate momentarily when
you switch the ignition on to confirm the
lamp is functional. If it does not illuminate
when you switch the ignition on, or begins
to flash at any time, have your vehicle
checked by an authorized dealer.
Safety Belt Minder Warning Lamp
It will illuminate and a chime will
sound to remind you to fasten
your safety belt. See Safety
Belt Minder (page 30).
84
Fiesta (CCT)
Instrument Cluster
Sounds when your vehicle speed exceeds
the pre-determined limit and the front
safety belts are unfastened. The chime will
stop after a period of time.
AUDIBLE WARNINGS AND
INDICATORS
Automatic Transmission
Sounds when you open the driver's door
and do not move the transmission selector
lever to position P.
Key Outside Car
Vehicles With Keyless System
Sounds when you close the door, the
engine is running and the system does not
detect a passive key inside your vehicle.
Headlamps On
Sounds when you remove the key from the
ignition and open the driver's door and you
have left the headlamps or parking lamps
on.
Low Fuel
A warning chime will sound when the
remaining fuel is less than approximately
1.3 gallons (6 liters). The distance to empty
displayed may vary depending on driving
style and road conditions.
Safety Belt Minder
WARNINGS
The safety belt minder remains in
stand-by mode when the front safety
belts have been fastened. It will
sound if either safety belt is unfastened.
Do not sit on top of a fastened safety
belt to prevent the safety belt minder
from coming on. The occupant
protection system will only provide
optimum protection when you use the
safety belt properly.
85
Fiesta (CCT)
Information Displays
Information Display Controls
GENERAL INFORMATION
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
E103626
Various systems on your vehicle can be
controlled using the information display
controls on your audio unit. Corresponding
information is displayed in the information
display.
To use the controls:
•
Note: The information display will remain
on for several minutes after you switch the
ignition off.
•
Device List
•
The icon changes to show the current
function in use.
Press the up or down arrow button to
scroll through and highlight the options
within a menu.
Press the right arrow button to enter a
submenu.
Press the left arrow button to exit a
submenu.
Press and hold the left arrow button at
any time to return to the main menu
display.
Press the OK button to choose and
confirm settings or messages.
CD
•
Radio
•
Auxiliary input
Menu Structure - Information
Display
You can access the menu using the
information display control.
Note: Some options may appear slightly
different or not at all if the items are
optional.
SYNC-Media allows you to access the
SYNC® features.
86
Fiesta (CCT)
Information Displays
SYNC-Phone
Dial a number
Redial
Phonebook
Call history
Speed Dial
Text messaging
BT Devices
Phone settings
Menu
Ford EcoMode
SYNC-Settings
Bluetooth on
Set defaults
Master reset
Install on SYNC
System info
Voice settings
SYNC-Apps
Navigation
Route options
Map display
Assistance options
Personal data
Reset all settings
Audio settings
Adaptive volume
Sound
NAV audio mixing
87
Fiesta (CCT)
Information Displays
Menu
DSP settings
DSP equalizer
Traffic
News
Alt. frequency
RDS Regional
Vehicle settings
Traction Control
ESC
Hill start assist
Alarm system
Powerfold mirrors
Indicator
Ambient light
Chimes
Clock settings
Auto time (GPS)
Set time
Set date
Set time zone
24-hour mode
Display settings
Measure Unit
Language
Dimming
MyKey
create MyKey
Traction control
ESC
Speed limit
Speed warning
88
Fiesta (CCT)
Information Displays
Menu
Volume limit
Information
clear all MyKeys
MyKey active
Information
You can reset the trip, average
fuel consumption and average
speed. Scroll to the required
display, then press and hold the button,
this will reset the trip computer.
System Check
All active warnings will display first if
applicable. The system check menu may
appear different based upon equipment
options and current vehicle status. Press
the up or down arrow button to scroll
through the list.
The trip computer includes the following
information displays:
Trip Odometer
CLOCK
Registers the distance traveled
of individual journeys.
Type 1
To adjust the clock, switch the ignition on
and press buttons H or M on the
information and entertainment display as
necessary.
Distance to Empty
Type 2
Note: Use the information display to adjust
the clock. See General Information (page
86).
E
E164638
TRIP COMPUTER
Indicates the approximate
distance your vehicle will travel
on the fuel remaining in the tank.
The distance to empty displayed
may vary depending on driving
style and road conditions.
Average Fuel Consumption
Indicates the average fuel
consumption since the function
was last reset.
E102759
Press the button to scroll through the
displays.
89
Fiesta (CCT)
Information Displays
The following chimes can be switched off:
• Warning messages.
• Information messages.
Average Speed
Indicates the average speed
calculated since the function
was last reset.
INFORMATION MESSAGES
Note: Depending on the options on your
vehicle, not all of the messages will display
or be available. Certain messages may be
abbreviated or shortened depending upon
which cluster type you have.
Distance Odometer
Registers the total distance your
vehicle has traveled.
PERSONALIZED SETTINGS
Measure Units
E103626
To swap between imperial and metric
units, scroll to this display and press the
OK button.
Press the OK button to acknowledge and
remove some messages from the
information display. Other messages will
be removed automatically after a short
time.
Swapping between imperial and metric
units will affect the following displays:
• Distance to empty.
• Average fuel consumption.
• Instantaneous fuel consumption.
• Average speed.
Certain messages need to be confirmed
before you can access the menus.
The message indicator
illuminates to supplement some
messages. It will be red or amber
depending on the severity of the message
and will remain on until the cause of the
message has been rectified.
Switching Chimes Off
To switch chimes off, scroll to this display
and press the OK button.
Some messages will be supplemented by
a system specific symbol with a message
indicator.
90
Fiesta (CCT)
Information Displays
Airbag
Message
Airbag malfunction Service now
Message
indicator
Amber
Action
Have the system checked by an
authorized dealer as soon as
possible.
Alarm
Message
Message
indicator
Action
Alarm triggered Check vehicle
Amber
See Security (page 61).
Interior scan deactivated
Amber
See Security (page 61).
Alarm system malfunction Service
required
-
Have the system checked by an
authorized dealer.
Doors Open
Message
indicator
Action
Driver door open
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close.
Driver side rear door open
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close.
Passenger door open
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close.
Passenger side rear door open
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close.
Trunk open
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close.
Message
91
Fiesta (CCT)
Information Displays
Message
Hood open
Message
indicator
Action
Red
Vehicle is moving. Stop your vehicle
as soon as safely possible and
close. See Opening and Closing
the Hood (page 177).
Driver door open
Amber
Vehicle not moving. Close.
Driver side rear door open
Amber
Vehicle not moving. Close.
Passenger door open
Amber
Vehicle not moving. Close.
Passenger side rear door open
Amber
Vehicle not moving. Close.
Trunk open
Amber
Vehicle not moving. Close.
Hood open
Amber
Vehicle not moving. Close. See
Opening and Closing the Hood
(page 177).
Engine Immobilizer
Message
Immobilizer malfunction Service
now
Message
indicator
Red
Action
Have the system checked by an
authorized dealer as soon as
possible.
Hill Start Assist
Message
Hill start assist not available
Message
indicator
Amber
Action
See Hill Start Assist (page 132).
Keyless System
Message
Key not detected
Message
indicator
Action
Amber
See Keyless Entry (page 58).
Key outside car
Amber
See Keyless Entry (page 58).
Key Battery low Replace battery
Amber
See Remote Control (page 43).
92
Fiesta (CCT)
Information Displays
Message
Message
indicator
Switch ign. off Press ENGINE Start/
Stop button
Amber
See Keyless Starting (page 114).
Press brake to start
-
See Keyless Starting (page 114).
Press clutch to start
-
See Keyless Starting (page 114).
Close trunk or use spare key
-
See Keyless Entry (page 58).
Action
Lighting
Message
Message
indicator
Action
Left indicator malfunction Change
bulb
-
See Changing a Bulb (page 195).
Right indicator malfunction Change
bulb
-
See Changing a Bulb (page 195).
Message
indicator
Action
Brake fluid level low Service now
Red
See Brake Fluid Check (page 185).
Brake system malfunction Stop
safely
Red
Have the system checked by an
authorized dealer immediately.
Engine oil pressure low Stop safely
Red
See Engine Oil Check (page 182).
Maintenance
Message
Engine malfunction Service now
Engine oil change due Service
required
Amber
Have the system checked by an
authorized dealer as soon as
possible.
-
Have the system checked by an
authorized dealer.
93
Fiesta (CCT)
Information Displays
MyKey
Message
MyKey Vehicle at top speed
Message
indicator
Action
Amber
Displays when a MyKey is in use and
the MyKey speed limit is on and your
vehicle speed is approaching 80
mph (130 km/h).
MyKey active Drive safely
-
Displays when MyKey is active.
MyKey Speed limited to <XX> mph
-
Displays when starting your vehicle
and MyKey is in use and the MyKey
speed limit is on.
MyKey Speed limited to <XXX> km/
h
-
Displays when starting your vehicle
and MyKey is in use and the MyKey
speed limit is on.
MyKey check speed Drive safely
-
Displays when MyKey is active.
MyKey vehicle near top speed
-
Displays when a MyKey is in use and
the MyKey speed limit is reached.
MyKey Buckle up to unmute audio
-
Displays when a MyKey is in use and
Belt- Minder is activated.
MyKey Park aid cannot be deactivated
-
Displays when a MyKey is in use and
park aid is activated.
MyKey ESC cannot be deactivated
-
Displays when programming a
MyKey.
Parking Brake
Message
Message
indicator
Action
Park brake applied
Red
See Parking Brake (page 134).
Park brake applied
Amber
See Parking Brake (page 134).
94
Fiesta (CCT)
Information Displays
Stability Control
Message
indicator
Action
Electronic stability control off
Amber
See Using Stability Control (page
137).
ABS malfunction Service Now
Amber
Have the system checked by an
authorized dealer as soon as
possible.
Message
Traction control off
-
See Using Stability Control (page
137).
Sport mode
-
See Using Stability Control (page
137).
Electronic stability control off
-
See Using Stability Control (page
137).
Message
indicator
Action
Starting and Stopping the Engine
Message
Press brake to start
-
See Starting and Stopping the
Engine (page 114).
Press clutch to start
-
See Starting and Stopping the
Engine (page 114).
Press brake and clutch to start
-
See Starting and Stopping the
Engine (page 114).
Cranking time exceeded
-
See Starting and Stopping the
Engine (page 114).
Steering
Message
Steering assist fault Service
required
Message
indicator
Action
Amber
Full steering will be maintained but
you will need to exert greater force
on the steering wheel. Have the
system checked by an authorized
dealer as soon as possible.
95
Fiesta (CCT)
Information Displays
Tire pressure monitoring system
Message
Message
indicator
Action
Check tire pressures
Amber
The pressure in one or more tires
has dropped. Check as soon as
possible.
Tire Pressure Monitor Fault
Amber
Permanent malfunction. Have your
vehicle checked by an authorized
dealer.
Message
Message
indicator
Action
Transmission malfunction Service
now
Red
Have the system checked by an
authorized dealer immediately.
Transmission overtemperature Stop
safely
Red
Under certain driving conditions it is
possible that the clutches in the
transmission can overheat. In these
circumstances it is necessary to
press the brake pedal and stop your
vehicle to prevent damage to the
transmission. Move the transmission selector lever to position N or
P and apply the parking brake until
the transmission has cooled and the
message disappears from the
display.
Use brake Stop safely
Red
Have the system checked by an
authorized dealer immediately.
Transmission
Vehicle not in Park Select P
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Select N or P to start
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Press brake to start
-
See Starting and Stopping the
Engine (page 114).
96
Fiesta (CCT)
Information Displays
Message
Message
indicator
Action
Select N to start
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Door open Apply brake
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Transmission hot Stop or speed up
-
Transmission is getting hot. Stop to
let it cool or speed up.
Transmission hot Wait...
-
Transmission is hot. Wait as needed
to let it cool.
Transmission ready
-
Your vehicle is ready to drive.
Press brake to unlock gearshift lever
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Gearshift lever unlocked
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
Transmission not in Park
-
See Automatic Transmission
(page 128). See Starting and
Stopping the Engine (page 114).
97
Fiesta (CCT)
Climate Control
Warming the Interior
PRINCIPLE OF OPERATION
Direct the air toward your feet. In cold or
humid weather conditions, direct some of
the air toward the windshield and the door
windows.
Outside Air
Keep the air intakes in front of the
windshield free from obstruction (such as
snow or leaves) to allow the climate
control system to function effectively.
Cooling the Interior
Direct the air toward your face.
Recirculated Air
AIR VENTS
WARNING
Prolonged use of recirculated air may
cause the windows to mist up. If the
windows mist up, follow the settings
for demisting the windshield.
Center Air Vents
The air currently in the passenger
compartment recirculates. Outside air does
not enter your vehicle.
Heating
Heating performance depends on the
temperature of the engine coolant.
Air Conditioning
Note: The air conditioning operates only
when the temperature is above 39°F (4°C).
E147812
Note: When you use air conditioning, your
vehicle uses more fuel.
Side Air Vent
The system directs air through the
evaporator for cooling. The evaporator
extracts humidity from the air to help keep
the windows free of mist. The system
directs the resulting condensation to the
outside of your vehicle, which may cause
a small pool to form under your vehicle.
This is normal.
E71942
General Information on Controlling
the Interior Climate
Fully close all the windows.
98
Fiesta (CCT)
Climate Control
MANUAL CLIMATE CONTROL
A
E158234
B
C
D
E
F
A
Fan speed control: Controls the volume of air circulated in your vehicle. Adjust
to select the desired fan speed.
B
Air distribution control: Adjust to select the desired air distribution. If you
select MAX A/C the system distributes recirculated air through the instrument
panel air vents. This mode is more economical and efficient than normal air
conditioning. Select O to turn the system off.
C
Recirculated air: Press the button to switch between outside air and
recirculated air. When you select recirculated air, the button illuminates and
the air currently in the passenger compartment recirculates. This can reduce
the time needed to cool the interior and reduce unwanted odors from entering
your vehicle.
D
Temperature control: Controls the temperature of the air circulated in your
vehicle. Adjust to select the desired temperature.
E
Heated rear window: Press the button to defog and clear the rear window of
a thin covering of ice.
F
Air conditioning: Press the button to switch the air conditioning on or off. Air
conditioning cools your vehicle using outside air. To improve air conditioning
when starting your vehicle, drive with the windows slightly open for two to three
minutes.
99
Fiesta (CCT)
Climate Control
AUTOMATIC CLIMATE CONTROL (IF EQUIPPED)
A
E158263
L
C
B
D
J
K
E
F
I
H
G
A
Fan speed: Controls the volume of air circulated in your vehicle. Rotate the
control to select the desired fan speed. The setting is shown in the display.
B
Instrument panel: Press the button to distribute air through the instrument
panel air vents.
C
Windshield: Press the button to distribute air through the windshield air vents.
You can also use this setting to defog and clear the windshield of a thin covering
of ice.
D
MAX Defrost: Press the button to distribute outside air through the windshield
air vents. Air conditioning is automatically selected. The fan is set to the highest
speed and the temperature to HI. When the air distribution is set in this position,
you are unable to select recirculated air or manually adjust the fan speed and
temperature control. Press the AUTO button to return to auto mode.
E
MAX A/C: Press the button to distribute recirculated air through the instrument
panel air vents. This mode is more economical and efficient than normal air
conditioning.
F
Temperature control: Controls the temperature of the air circulated in your
vehicle. Adjust to select the desired temperature.
100
Fiesta (CCT)
Climate Control
G
Air conditioning: Press the button to switch the air conditioning on or off. Air
conditioning cools your vehicle using outside air. To improve air conditioning
when starting your vehicle, drive with the windows slightly open for two to three
minutes.
H
Recirculated air: Press the button to switch between outside air and
recirculated air. The air currently in the passenger compartment recirculates.
This can reduce the time needed to cool the interior and reduce unwanted odors
from entering your vehicle.
I
Off button: Press the button to switch the system off.
J
Heated rear window: Press the button to defog and clear the rear window of
a thin covering of ice.
K
Footwell: Press the button to distribute air through the footwell air vents.
L
AUTO: Press the button to select automatic operation. The system
automatically controls the temperature, amount and distribution of the airflow
to reach and maintain your previously selected temperature.
Temperature Control
HINTS ON CONTROLLING THE
INTERIOR CLIMATE
General Hints
Note: Prolonged use of recirculated air may
cause the windows to fog up.
Note: A small amount of air may be felt
from the footwell air vents regardless of the
air distribution setting.
Note: To reduce humidity build-up inside
your vehicle, do not drive with the system
switched off or with recirculated air always
switched on.
Note: Do not place objects under the front
seats as this may interfere with the airflow
to the rear seats.
E148690
You can set the temperature between 61°F
(16°C) and 82°F (28°C). In position low,
the system switches to permanent cooling.
In position high, the system switches to
permanent heating.
Note: Remove any snow, ice or leaves from
the air intake area at the base of the
windshield.
Note: If you select either position low or
high, the system will not regulate a stable
temperature.
101
Fiesta (CCT)
Climate Control
Manual Climate Control
Note: When the system is switched off,
outside air is prevented from entering your
vehicle.
Note: To reduce fogging of the windshield
during humid weather, adjust the air
distribution control to the windshield air
vents position. Increase the temperature
and fan speed to improve clearing, if
required.
Note: When you select AUTO mode and
the interior and exterior temperatures are
high, the system automatically selects
recirculated air to maximize cooling of the
interior. When the desired air temperature
is reached, the system automatically selects
outside air.
Automatic Climate Control
Note: Do not adjust the settings when your
vehicle interior is extremely hot or cold. The
system automatically adjusts to the
previously stored settings. For the system
to function efficiently, the instrument panel
and side air vents should be fully open.
Note: When you select windshield
defrosting and defogging, the instrument
panel and footwell level functions
automatically switch off and air conditioning
switches on. Outside air flows into your
vehicle.
Note: At low ambient temperatures with
AUTO selected, the air stream is directed
toward the windshield and side windows
for as long as the engine remains cold.
Heating the Interior Quickly
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Adjust the fan speed to the highest
setting.
Press the AUTO button.
2
Adjust the temperature control to the
highest setting.
Adjust the temperature control to the
desired setting.
3
Adjust the air distribution control to the
footwell air vents position.
Recommended Settings for Heating
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Adjust the fan speed to the second
setting.
Press the AUTO button.
2
Adjust the temperature control to the
desired setting.
Adjust the temperature control to the
desired setting.
3
Adjust the air distribution control to the
footwell and windshield air vents position.
102
Fiesta (CCT)
Climate Control
Cooling the Interior Quickly
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Adjust the fan speed to the highest
setting.
Press the AUTO button.
2
Adjust the temperature control setting
to MAX A/C.
Adjust the temperature control to the
desired setting.
3
Adjust the air distribution control to the Or, press the MAX A/C button.
instrument panel air vents position.
Recommended Settings for Cooling
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Adjust the fan speed to the second
setting.
Press the AUTO button.
2
Adjust the temperature control to the
desired setting.
Adjust the temperature control to the
desired setting.
3
Adjust the air distribution control to the
instrument panel air vents position.
4
Press the A/C button.
Vehicle Stationary for Extended Periods During Extreme High Ambient
Temperatures
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Apply the parking brake.
Apply the parking brake.
2
Move the transmission selector lever to
position P or neutral.
Move the transmission selector lever to
position P or neutral.
3
Adjust the temperature control to the
MAX A/C position.
Press the AUTO button.
4
Adjust the fan speed to the highest
setting.
Adjust the temperature control to the
desired setting.
103
Fiesta (CCT)
Climate Control
Side Window Defogging in Cold Weather
Vehicles With Manual Climate Control
Vehicles With Automatic Climate Control
1
Adjust the fan speed to the highest
setting.
Press the MAX defrost button.
2
Adjust the temperature control to the
highest setting.
Adjust the temperature control to the
desired setting.
3
Adjust the air distribution control to the
windshield position.
4
Press the A/C button.
Heated Exterior Mirrors
Maximum Cooling Performance in
Instrument Panel or Instrument
Panel and Footwell Positions
Electric exterior mirrors have a heating
element that will defrost or demist the
mirror glass. They will switch on
automatically when you switch the heated
rear window on.
1.
Adjust the temperature control to the
lowest setting.
2. Press the A/C and recirculated air
buttons.
3. Adjust the fan speed to the highest
setting initially and then adjust it to suit
the desired comfort level.
CABIN AIR FILTER
Your vehicle is equipped with a cabin air
filter. It is located behind the center
console.
HEATED WINDOWS AND
MIRRORS
The particulate filtration system reduces
the concentration of airborne particles
such as dust, spores and pollen in the air
supplied to the interior of your vehicle.
Heated Windows
Note: Make sure you have a cabin air filter
installed at all times. This prevents foreign
objects from entering the system. Running
the system without a filter in place could
result in degradation or damage to the
system.
Use the heated windows to defrost or
demist the rear window.
Note: The heated windows operate only
when the engine is running.
Heated Rear Window
E72507
104
Fiesta (CCT)
Climate Control
The particulate filtration system gives you
and your passengers the following
benefits:
• It improves your driving comfort by
reducing particle concentration.
• It improves the interior compartment
cleanliness.
• It protects the climate control
components from particle deposits.
Replace the filter at regular intervals. See
Scheduled Maintenance (page 368).
For additional cabin air filter information,
or to replace the filter, see an authorized
dealer.
105
Fiesta (CCT)
Seats
•
SITTING IN THE CORRECT
POSITION
WARNINGS
Do not recline the seatback too far
as this can cause the occupant to
slide under the safety belt, resulting
in serious injury in the event of a collision.
•
Sitting improperly, out of position or
with the seatback reclined too far,
can result in serious injury or death
in the event of a collision. Always sit
upright against your seatback, with your
feet on the floor.
•
•
•
Do not place objects higher than the
seatback to reduce the risk of serious
injury in the event of a collision or
during heavy braking.
Adjust the head restraint so that the
top of it is level with the top of your
head and as far forward as possible.
Make sure that you remain
comfortable.
Keep sufficient distance between
yourself and the steering wheel. We
recommend a minimum of 10 inches
(25 centimeters) between your
breastbone and the air bag cover.
Hold the steering wheel with your arms
slightly bent.
Bend your legs slightly so that you can
press the pedals fully.
Position the shoulder strap of the
safety belt over the center of your
shoulder and position the lap strap
tightly across your hips.
Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.
HEAD RESTRAINTS
WARNINGS
Fully adjust the head restraint before
you sit in or operate your vehicle. This
will help minimize the risk of neck
injury in the event of a crash. Do not adjust
the head restraint when your vehicle is
moving.
The head restraint is a safety device.
Whenever possible it should be
installed and properly adjusted when
the seat is occupied. An improperly
adjusted head restraint may not
adequately protect an occupant during an
impact from the rear.
E68595
When you use them properly, the seat,
head restraint, safety belt and air bags will
provide optimum protection in the event
of a collision.
We recommend that you follow these
guidelines:
• Sit in an upright position with the base
of your spine as far back as possible.
• Do not recline the seatback more than
30 degrees.
Install the head restraint properly to
help minimize the risk of neck injury
in the event of a crash.
106
Fiesta (CCT)
Seats
Note: Adjust the seat back to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
Rear center head restraint
Front seat head restraint
E138645
The head restraints consist of:
A
an energy absorbing head
restraint
B
two steel stems
C
guide sleeve adjust and unlock
button
D
guide sleeve unlock and remove
button
E
fold button
E138642
Rear seat outboard head restraints
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
1. Press and hold button C.
2. Push the head restraint down.
E138643
Removing the Head Restraint
1.
Pull the head restraint up until it
reaches its highest position.
2. Press and hold buttons C and D.
3. Pull the head restraint up.
107
Fiesta (CCT)
Seats
Installing the Head Restraint
MANUAL SEATS
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
WARNING
Do not adjust the driver seat when
your vehicle is moving. This may
result in the loss of control of your
vehicle, serious personal injury or death.
Folding the Head Restraint
1. Press and hold button E.
2. Pull it back up to reset.
Moving the Seat Backward and
Forward
Tilting Head Restraints (If Equipped)
The front head restraints may have a tilting
feature for extra comfort. To tilt the head
restraint, do the following:
WARNING
Rock the seat backward and forward
after releasing the lever to make sure
that it is fully engaged in its catch. A
seat which is not fully engaged in its catch
could move when your vehicle is moving.
This may result in the loss of control of
your vehicle, serious personal injury or
death.
E144727
1.
Adjust the seat back to an upright
driving or riding position.
2. Pivot the head restraint forward toward
your head to the desired position.
After the head restraint reaches the
forward-most tilt position, pivot it forward
again to release it to the rearward, un-tilted
position.
E147926
108
Fiesta (CCT)
Seats
Adjusting the Lumbar Support (If
Recline Adjustment
Equipped)
E70731
REAR SEATS
E142199
Adjusting the Height of the Driver
Seat
Folding the Seatback
WARNING
When folding the seatback down,
take care not to get your hands
caught between the seatback and
the frame, catches or mechanism. Failure
to take care may result in personal injury.
Note: Fully lower the head restraints. Your
vehicle may have folding rear head
restraints. Fold these before you fold the
seatback. See Head Restraints (page 106).
E70730
109
Fiesta (CCT)
Seats
1
3. Stow the safety belt in the belt
stowage clip. This prevents the safety
belt from getting caught in the seat
latch.
Note: Do not attempt to fold the rear seat
cushion forward.
1
Unfolding the Seatback
2
WARNINGS
When unfolding the seatback up,
take care not to get your hands
caught between the seatback and
the frame, catches or mechanism. Failure
to take care may result in personal injury.
Make sure that any cargo or objects
are not trapped behind the seatback.
Make sure the safety belts are not
trapped in any way when unfolding the
seatback up. Failure of an occupant to be
able to use a trapped safety belt increases
the risk of serious personal injury or death.
E156656
1.
Press the unlock buttons down and
hold them there.
2. Push the seatback forward.
Make sure that the seatback is fully
engaged in its catch. A seatback
which is not fully engaged in its catch
could move in the event of an accident.
This may result in serious personal injury
or death.
HEATED SEATS
WARNINGS
People who are unable to feel pain
to their skin because of advanced
age, chronic illness, diabetes, spinal
cord injury, medication, alcohol or drug use,
exhaustion or other physical conditions,
must exercise extreme care when using
the heated seat. The heated seat may
cause burns even at low temperatures,
especially if used for long periods of time.
An overheated seat may cause serious
personal injury.
E165362
110
Fiesta (CCT)
Seats
Press the required switch once
for maximum seat heating, two
lights will be illuminated on the
switch. Press the switch again for a lower
seat heating level, one light will be
illuminated on the switch. Press the switch
again to turn the seat heating off; no lights
will be illuminated on the switch.
WARNINGS
Do not place anything on the seat
that insulates against heat, for
example; blankets or cushions. This
may cause the heated seat to overheat.
An overheated seat may cause serious
personal injury.
Do not puncture the seat with any
sharp objects. This may damage the
heating element which may cause
the heated seat to overheat. An
overheated seat may cause serious
personal injury.
The seat heaters will only turn on with the
ignition turned on.
Note: You should avoid using the seat
heaters unless the engine is running. Using
the seat heaters without the engine running
could drain your vehicle battery.
Do not place heavy objects on the
seat. This may damage the heating
element which may cause the
heated seat to overheat. An overheated
seat may cause serious personal injury.
The heated seat will remain turned on until
either the heated seat switch or the ignition
is turned off.
Do not use the seat heater if any
liquid is spilled on the seat. This may
damage the heating element which
may cause the heated seat to overheat.
Allow the seat to dry thoroughly before
reusing the seat heater. An overheated
seat may cause serious personal injury.
Note: The heated seats include both a
heated seat cushion and heated seatback.
E156657
111
Fiesta (CCT)
Auxiliary Power Points
12 Volt DC Power Point
Location
Power points may be found:
• on the center console
• on the rear of the center console.
WARNING
Do not plug optional electrical
accessories into the cigar lighter
socket. Incorrect use of the lighter
can cause damage not covered by your
warranty, and can result in fire or serious
injury.
CIGAR LIGHTER (IF EQUIPPED)
Note: Do not hold the cigar lighter element
pressed in.
Note: When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 20 amps.
Note: If you use the socket when the engine
is not running, the battery may lose charge.
Note: When you switch the ignition on, you
can use the socket to power 12 volt
appliances with a maximum current rating
of 20 amps.
After you switch the ignition off the power
supply will only work for a maximum of 30
minutes.
Note: Do not insert objects other than an
accessory plug into the power point. This
will damage the outlet and blow the fuse.
Note: After you switch the ignition off the
power supply will only work for a maximum
of 30 minutes.
Note: Do not hang any type of accessory or
accessory bracket from the plug.
Note: Use only Ford accessory connectors
or connectors specified for use with SAE
standard sockets.
Note: Do not use the power point over the
vehicle capacity of 12 volt DC 180 watt or a
fuse may blow.
Note: Do not use the power point for
operating a cigar lighter element.
Note: Incorrect use of the power point can
cause damage not covered by your
warranty.
Note: Always keep the power point caps
closed when not in use.
Run the engine for full capacity use of the
power point.
E103382
Press the element in to use the cigar
lighter. It will pop out automatically.
To prevent the battery from running out of
charge:
• Do not use the power point longer than
necessary when the engine is not
running.
• Do not leave devices plugged in
overnight or when your vehicle is
parked for extended periods.
112
Fiesta (CCT)
Storage Compartments
CUP HOLDERS
WARNING
Do not place hot drinks in the cup
holders when your vehicle is moving.
113
Fiesta (CCT)
Starting and Stopping the Engine
GENERAL INFORMATION
IGNITION SWITCH
WARNINGS
Extended idling at high engine
speeds can produce very high
temperatures in the engine and
exhaust system, creating the risk of fire or
other damage.
Do not park, idle or drive your vehicle
on dry grass or other dry ground
cover. The emission system heats up
the engine compartment and exhaust
system, creating the risk of fire.
E72128
0 (off) - The ignition is off.
Note: When you switch the ignition off and
leave your vehicle, do not leave your key in
the ignition. This could cause your vehicle
battery to lose charge.
Do not start the engine in a closed
garage or in other enclosed areas.
Exhaust fumes can be toxic. Always
open the garage door before you start the
engine.
Note: To switch the engine off when your
vehicle is moving, move the transmission
selector lever to position N. Use the brakes
to bring the vehicle to a safe stop. After your
vehicle has stopped, switch the engine off
and move the transmission selector lever to
position P. Turn the key to position 0 or I.
If you smell exhaust fumes inside
your vehicle, have your vehicle
checked by an authorized dealer
immediately. Do not drive your vehicle if
you smell exhaust fumes.
I (accessory) - Allows the electrical
accessories such as the radio to operate
while the engine is not running.
If you disconnect the battery, your vehicle
may exhibit some unusual driving
characteristics for approximately 5 miles
(8 kilometers) after you reconnect it. This
is because the engine management system
must realign itself with the engine. You can
disregard any unusual driving
characteristics during this period.
Note: Do not leave the ignition key in this
position for too long. This could cause your
vehicle battery to lose charge.
II (on) - All electrical circuits operational.
Warning lamps and indicators are
illuminated.
The powertrain control system meets all
Canadian interference-causing equipment
standard requirements regulating the
impulse electrical field or radio noise.
III (start) - cranks the engine. Release the
key as soon as the engine starts.
KEYLESS STARTING (IF EQUIPPED)
When you start the engine, avoid pressing
the accelerator pedal before and during
operation. Only use the accelerator pedal
when you have difficulty starting the
engine.
WARNING
The system may not function if the
key is close to metal objects or
electronic devices such as cell
phones.
114
Fiesta (CCT)
Starting and Stopping the Engine
Failure to Start
Note: The ignition will automatically switch
off when you leave your vehicle unattended.
This is to prevent your vehicle battery
running out of charge.
All Vehicles
The system will not function if:
Note: A valid key must be located inside
your vehicle to switch the ignition on and
start the engine.
•
•
Ignition On
If you are unable to start your vehicle, do
the following.
The key frequencies are jammed.
The key battery has no charge.
Press the START button once. It is located
on the instrument panel near the steering
wheel. All electrical circuits and
accessories are operational and the
warning lamps and indicators will
illuminate.
E99666
1.
Hold the key next to the steering
column exactly as shown.
2. With the key in this position you can
use the button to switch the ignition on
and start your engine.
E142555
Starting with Manual
Transmission
Note: Releasing the clutch pedal while the
engine is starting will stop the engine
cranking and return to ignition on.
Manual Transmission
1. Fully depress the clutch pedal.
2. Briefly press the button.
Note: Releasing the clutch pedal while the
engine is starting will stop the engine
cranking and return to ignition on. A
message will be shown in the display.
Starting with Automatic
Transmission
If the engine does not crank when the
clutch pedal has been fully depressed and
the button is pressed:
Note: Releasing the brake pedal while the
engine is starting will stop the engine
cranking and return to ignition on.
1.
Fully depress both the clutch and brake
pedals.
2. Press the button until the engine starts.
1.
Move the transmission selector lever
to position P or N.
2. Fully depress the brake pedal.
3. Briefly press the button.
115
Fiesta (CCT)
Starting and Stopping the Engine
Stopping the Engine with Your
Vehicle Stationary
STARTING A GASOLINE
ENGINE
Note: The ignition, all electrical circuits
warning lamps and indicators will be
switched off.
Note: You can only operate the starter for
a limited period of time, for example 10
seconds. The number of start attempts is
limited to approximately six. If you exceed
this limit, the system will not allow you to
try again until a period of time has elapsed,
for example 30 minutes.
Manual Transmission
Briefly press the button.
Automatic Transmission
When you start the engine, the idle speed
increases, this helps to warm up the
engine. If the engine idle speed does not
slow down automatically, have your
vehicle checked by an authorized dealer.
1.
Move the transmission selector lever
to position P.
2. Press the button.
Stopping the Engine When Your
Vehicle is Moving
Before starting the engine check the
following:
• Make sure all occupants have fastened
their safety belts.
• Make sure the headlamps and
electrical accessories are off.
• Make sure the parking brake is on.
• Move the transmission selector lever
to position P (automatic transmission)
or neutral (manual transmission).
• Turn the ignition key to position II. If
your vehicle is equipped with a keyless
ignition, see the following instructions.
WARNING
Switching off the engine when the
vehicle is still moving will result in a
loss of brake and steering assistance.
The steering will not lock, but higher effort
will be required. With the ignition switched
off some electrical circuits, warning lamps
and indicators may also be off.
1.
Press and hold the button for at least
one second or press it three times
within two seconds.
2. Move the transmission selector lever
to position N and use the brakes to
bring your vehicle to a safe stop.
3. When your vehicle has stopped, move
the transmission selector lever to
position P or N and switch the ignition
off.
Cold or Hot Engine
Vehicles with Manual Transmission
Note: Do not touch the accelerator pedal.
Note: Releasing the clutch pedal while the
engine is starting will stop the engine
cranking and return to ignition on.
1. Fully depress the clutch pedal.
2. Start the engine.
Vehicles with Automatic Transmission
Note: Do not touch the accelerator pedal.
116
Fiesta (CCT)
Starting and Stopping the Engine
The idle speed will vary depending on
certain factors. These include vehicle
component and ambient temperatures as
well as electrical and climate system
demands.
1.
Move the transmission selector lever
to position P or N.
2. Start the engine.
All Vehicles
If the engine does not start within 10
seconds, wait for a short period and try
again.
Failure to Start
If the engine does not start after three
attempts, wait 10 seconds and follow the
flooded engine procedure.
If the engine does not crank when the
clutch pedal has been fully depressed and
the ignition key is turned to position III.
If you have difficulty starting the engine
when the temperature is below -13°F
(-25°C), press the accelerator pedal to the
mid-way point of its travel and try again.
1.
Vehicles with Manual Transmission
Fully depress the clutch and brake
pedals.
2. Turn the key to position III until the
engine has started.
Flooded Engine
SWITCHING OFF THE ENGINE
Vehicles with Manual Transmission
Vehicles With a Turbocharger
1. Fully depress the clutch pedal.
2. Fully depress the accelerator pedal and
hold it there.
3. Start the engine.
WARNING
Do not switch the engine off when it
is running at high speed. If you do, the
turbocharger will continue running
after the engine oil pressure has dropped
to zero. This will lead to premature
turbocharger bearing wear.
Vehicles with Automatic Transmission
1.
Move the transmission selector lever
to position P or N.
2. Fully depress the accelerator pedal and
hold it there.
3. Start the engine.
Release the accelerator pedal. Wait until
the engine has reached idle speed and then
switch it off.
All Vehicles
ENGINE BLOCK HEATER (IF
If the engine does not start, repeat the cold
or hot engine procedure.
EQUIPPED)
Engine Idle Speed after Starting
WARNINGS
Failure to follow engine block heater
instructions could result in property
damage or serious personal injury.
The speed at which the engine idles
immediately after starting is optimized to
minimize vehicle emissions and maximize
cabin comfort and fuel economy.
117
Fiesta (CCT)
Starting and Stopping the Engine
•
WARNINGS
Do not use your heater with
ungrounded electrical systems or
two-pronged adapters. There is a risk
of electrical shock.
•
Note: The heater is most effective when
outdoor temperatures are below 0°F
(-18°C).
•
The heater acts as a starting aid by
warming the engine coolant. This allows
the climate control system to respond
quickly. The equipment includes a heater
element (installed in the engine block) and
a wire harness. You can connect the
system to a grounded 120-volt AC
electrical source.
Using the Engine Block Heater
Make sure the receptacle terminals are
clean and dry prior to use. Clean them with
a dry cloth if necessary.
The heater uses 0.4 to 1.0 kilowatt-hours
of energy per hour of use. The system does
not have a thermostat. It achieves
maximum temperature after
approximately three hours of operation.
Using the heater longer than three hours
does not improve system performance and
unnecessarily uses electricity.
We recommend that you do the following
for a safe and correct operation:
• Use a 16-gauge outdoor extension cord
that is product certified by
Underwriter’s Laboratory (UL) or
Canadian Standards Association
(CSA). This extension cord must be
suitable for use outdoors, in cold
temperatures, and be clearly marked
Suitable for Use with Outdoor
Appliances. Do not use an indoor
extension cord outdoors. This could
result in an electric shock or become a
fire hazard.
• Use as short an extension cord as
possible.
• Do not use multiple extension cords.
• Make sure that when in operation, the
extension cord plug and heater cord
plug connections are free and clear of
water. This could cause an electric
shock or fire.
• Make sure your vehicle is parked in a
clean area, clear of combustibles.
• Make sure the heater, heater cord and
extension cord are firmly connected.
118
Fiesta (CCT)
Check for heat anywhere in the
electrical hookup once the system has
been operating for approximately 30
minutes.
Make sure the system is unplugged and
properly stowed before driving your
vehicle. Make sure the protective cover
seals the prongs of the block heater
cord plug when not in use.
Make sure the heater system is
checked for proper operation before
winter.
Fuel and Refueling
•
SAFETY PRECAUTIONS
WARNINGS
Do not overfill the fuel tank. The
pressure in an overfilled tank may
cause leakage and lead to fuel spray
and fire.
The fuel system may be under
pressure. If you hear a hissing sound
near the fuel filler door (Easy Fuel
capless fuel system), do not refuel until
the sound stops. Otherwise, fuel may spray
out, which could cause serious personal
injury.
•
Automotive fuels can cause serious
injury or death if misused or
mishandled.
•
The flow of fuel through a fuel pump
nozzle can produce static electricity,
which can cause a fire if fuel is
pumped into an ungrounded fuel container.
•
Fuel ethanol and gasoline may
contain benzene, which is a
cancer-causing agent.
When refueling always shut the
engine off and never allow sparks or
open flames near the filler neck.
Never smoke or use a cell phone while
refueling. Fuel vapor is extremely
hazardous under certain conditions. Avoid
inhaling excess fumes.
•
Observe the following guidelines when
handling automotive fuel:
•
•
Extinguish all smoking materials and
any open flames before refueling your
vehicle.
Always turn off the vehicle before
refueling.
119
Fiesta (CCT)
Automotive fuels can be harmful or
fatal if swallowed. Fuel such as
gasoline is highly toxic and if
swallowed can cause death or
permanent injury. If fuel is swallowed,
call a physician immediately, even if no
symptoms are immediately apparent.
The toxic effects of fuel may not be
visible for hours.
Avoid inhaling fuel vapors. Inhaling too
much fuel vapor of any kind can lead
to eye and respiratory tract irritation.
In severe cases, excessive or prolonged
breathing of fuel vapor can cause
serious illness and permanent injury.
Avoid getting fuel liquid in your eyes. If
fuel is splashed in the eyes, remove
contact lenses (if worn), flush with
water for 15 minutes and seek medical
attention. Failure to seek proper
medical attention could lead to
permanent injury.
Fuels can also be harmful if absorbed
through the skin. If fuel is splashed on
the skin, clothing or both, promptly
remove contaminated clothing and
wash skin thoroughly with soap and
water. Repeated or prolonged skin
contact with fuel liquid or vapor causes
skin irritation.
Be particularly careful if you are taking
“Antabuse” or other forms of disulfiram
for the treatment of alcoholism.
Breathing gasoline vapors, or skin
contact could cause an adverse
reaction. In sensitive individuals, serious
personal injury or sickness may result.
If fuel is splashed on the skin, promptly
wash skin thoroughly with soap and
water. Consult a physician immediately
if you experience an adverse reaction.
Fuel and Refueling
Do not be concerned if your engine
sometimes knocks lightly. However, if it
knocks heavily while you are using fuel with
the recommended octane rating, see an
authorized dealer to prevent any engine
damage.
FUEL QUALITY - GASOLINE
Note: Use of any fuel other than those
recommended may cause vehicle damage,
a loss of vehicle performance and repairs
may not be covered under warranty.
Choosing the Right Fuel
RUNNING OUT OF FUEL
Use only UNLEADED fuel or UNLEADED
fuel blended with a maximum of 15%
ethanol. Do not use fuel ethanol (E85),
diesel fuel, fuel-methanol, leaded fuel or
any other fuel because it could damage or
impair the emission control system.
Avoid running out of fuel because this
situation may have an adverse effect on
powertrain components.
If you have run out of fuel:
•
Your vehicle was not designed to use fuel
or fuel additives with metallic compounds,
including manganese-based additives. The
use of leaded fuel is prohibited by law.
Octane Recommendations
1.6L Engine
•
Regular unleaded gasoline with a pump
(R+M)/2 octane rating of 87 is
recommended. Some fuel stations offer
fuels posted as regular with an octane
rating below 87, particularly in high altitude
areas. Fuels with octane levels below 87
are not recommended.
Refilling With a Portable Fuel
Container
1.0L and 1.6L EcoBoost Engines
WARNINGS
Do not insert the nozzle of portable
fuel containers or aftermarket
funnels into the capless fuel system.
This could damage the fuel system and its
seal, and may cause fuel to run onto the
ground instead of filling the tank, which
could result in serious personal injury.
Regular unleaded gasoline with a pump
(R+M)/2 octane rating of 87 is
recommended. Some fuel stations offer
fuels posted as regular with an octane
rating below 87, particularly in high altitude
areas. Fuels with octane levels below 87
are not recommended. Premium fuel will
provide improved performance and is
recommended for severe duty usage such
as trailer tow.
Do not try to pry open or push open
the capless fuel system with foreign
objects. This could damage the fuel
system and its seal and cause injury to you
or others.
120
Fiesta (CCT)
You may need to cycle the ignition from
off to on several times after refueling
to allow the fuel system to pump the
fuel from the tank to the engine. On
restarting, cranking time will take a few
seconds longer than normal. With
keyless ignition, just start the engine.
Crank time will be longer than usual.
Normally, adding 1 gallon (4.6 liters) of
fuel is enough to restart the engine. If
your vehicle is out of fuel and on a
steep grade, more than 1 gallon (4.6
liters) may be required.
Fuel and Refueling
Note: Do not use aftermarket funnels; they
will not work with the capless fuel system
and can damage it. The included funnel has
been specially designed to work safely with
your vehicle.
WARNINGS
Do not smoke if you are near fuel or
refueling your vehicle.
Keep sparks, flames and smoking
materials away from fuel.
When filling your vehicle’s fuel tank from
a portable fuel container, use the funnel
included with your vehicle.
Stay outside your vehicle and do not
leave the fuel pump unattended
when refueling your vehicle. This is
against the law in some places.
Keep children away from the fuel
pump; never let children pump fuel.
Do not use personal electronic
devices while refueling.
Use the following guidelines to avoid
electrostatic charge build-up when filling
an ungrounded fuel container:
E142668
•
1.
Locate the plastic funnel in the rear of
the vehicle, inside the load
compartment.
2. Slowly insert the funnel into the
capless fuel system.
3. Fill your vehicle with fuel from the
portable fuel container.
4. When done, clean the funnel or
properly dispose of it. Extra funnels can
be purchased from your authorized
dealer if you choose to dispose of the
funnel.
•
•
•
Easy Fuel™ Capless Fuel System
WARNING
The fuel system may be under
pressure. If you hear a hissing sound
near the fuel filler door, do not refuel
until the sound stops. Otherwise, fuel may
spray out, which could cause serious
personal injury.
REFUELING
WARNINGS
Fuel vapor burns violently and a fuel
fire can cause severe injuries.
When fueling your vehicle:
Read and follow all the instructions
on the pump island.
1.
Put the vehicle in P (Park) and turn the
ignition off.
2. Open the fuel filler door.
Turn off your engine when you are
refueling.
121
Fiesta (CCT)
Place approved fuel container on the
ground.
Do not fill a fuel container while it is in
the vehicle (including the cargo area).
Keep the fuel pump nozzle in contact
with the fuel container while filling.
Do not use a device that would hold
the fuel pump handle in the fill position.
Fuel and Refueling
If the fuel fill inlet was not properly closed,
a service engine warning lamp may appear
on the instrument cluster.
At the next opportunity, do the following:
1. Safely pull off the road.
2. Put the vehicle in P (Park) and turn the
ignition off.
3. Open the fuel filler door and remove
any visible debris from the fuel fill
opening.
4. Insert either the fuel fill nozzle or the
fuel fill funnel provided with the vehicle
several times to allow the inlet to close
properly. This will dislodge any debris
preventing the inlet from sealing.
E156032
3. Slowly insert the fuel filler nozzle fully
into the fuel system, and leave the
nozzle fully inserted to open both doors
until you are done pumping. Hold
handle higher during insertion for easier
access.
If this action corrects the problem, the
warning lamp may not reset immediately.
It may take several driving cycles for the
warning lamp to turn off. A driving cycle
consists of an engine start-up (after four
or more hours with the engine off) followed
by city or highway driving.
FUEL CONSUMPTION
Note: The amount of usable fuel in the
empty reserve varies and should not be
relied upon to increase driving range. When
refueling your vehicle after the fuel gauge
indicates empty, you might not be able to
refuel the full amount of the advertised
capacity of the fuel tank due to the empty
reserve still present in the tank.
E154765
4. After you are done pumping fuel, slowly
remove the fuel filler nozzle—allow
about five to ten seconds after
pumping fuel before removing the fuel
filler nozzle. This allows residual fuel
to drain back into the fuel tank and not
spill onto the vehicle.
Note: A fuel spillage concern may occur if
overfilling the fuel tank. Do not overfill the
tank to the point that the fuel is able to
bypass the fuel filler nozzle. The overfilled
fuel may run down the drain located below
and in front of the fuel filler door.
Empty reserve is the amount of fuel
remaining in the tank after the fuel gauge
indicates empty. Do not rely on this fuel for
driving. The usable capacity of the fuel
tank is the amount of fuel that can be put
into the tank after the gauge indicates
empty. The advertised capacity is the total
fuel tank size – it is the combined usable
capacity plus the empty reserve.
122
Fiesta (CCT)
Fuel and Refueling
Filling the Tank
Keep a record for at least one month and
record the type of driving (city or highway).
This provides an accurate estimate of the
vehicle’s fuel economy under current
driving conditions. Additionally, keeping
records during summer and winter show
how temperature impacts fuel economy.
In general, lower temperatures mean lower
fuel economy.
For consistent results when filling the fuel
tank:
•
•
•
Turn the ignition off before fueling; an
inaccurate reading results if the engine
is left running.
Use the same fill rate
(low-medium-high) each time the tank
is filled.
Allow no more than two automatic
click-offs when filling.
EMISSION CONTROL SYSTEM
WARNINGS
Do not park, idle, or drive your vehicle
in dry grass or other dry ground cover.
The emission system heats up the
engine compartment and exhaust system,
which can start a fire.
Results are most accurate when the filling
method is consistent.
Calculating Fuel Economy
Do not measure fuel economy during the
first 1000 miles (1600 kilometers) of
driving (this is your engine’s break-in
period); a more accurate measurement is
obtained after 2000 miles - 3000 miles
(3200 kilometers - 4800 kilometers). Also,
fuel expense, frequency of fill ups or fuel
gauge readings are not accurate ways to
measure fuel economy.
1.
2.
3.
4.
5.
Exhaust leaks may result in entry of
harmful and potentially lethal fumes
into the passenger compartment. If
you smell exhaust fumes inside your
vehicle, have your dealer inspect your
vehicle immediately. Do not drive if you
smell exhaust fumes.
Fill the fuel tank completely and record
the initial odometer reading.
Each time you fill the tank, record the
amount of fuel added.
After at least three to five tank fill ups,
fill the fuel tank and record the current
odometer reading.
Subtract your initial odometer reading
from the current odometer reading.
Calculate fuel economy by dividing
miles traveled by gallons used (For
Metric: Multiply liters used by 100, then
divide by kilometers traveled).
Your vehicle is equipped with various
emission control components and a
catalytic converter which will enable your
vehicle to comply with applicable exhaust
emission standards. To make sure that the
catalytic converter and other emission
control components continue to work
properly:
To make sure that the catalytic converter
and other emission control components
continue to work properly:
• Use only the specified fuel listed.
• Avoid running out of fuel.
123
Fiesta (CCT)
Fuel and Refueling
•
•
On-Board Diagnostics (OBD-II)
Do not turn off the ignition while your
vehicle is moving, especially at high
speeds.
Have the items listed in scheduled
maintenance information performed
according to the specified schedule.
Your vehicle is equipped with a computer
that monitors the engine’s emission control
system. This system is commonly known
as the on-board diagnostics system
(OBD-II). The OBD-II system protects the
environment by ensuring that your vehicle
continues to meet government emission
standards. The OBD-II system also assists
your authorized dealer in properly servicing
your vehicle.
The scheduled maintenance items listed
in scheduled maintenance information are
essential to the life and performance of
your vehicle and to its emissions system
If other than Ford, Motorcraft® or
Ford-authorized parts are used for
maintenance replacements or for service
of components affecting emission control,
such non-Ford parts should be equivalent
to genuine Ford Motor Company parts in
performance and durability.
When the service engine soon
indicator illuminates, the OBD-II
system has detected a
malfunction. Temporary malfunctions may
cause the service engine soon indicator to
illuminate. Examples are:
Illumination of the service engine soon
indicator, charging system warning light or
the temperature warning light, fluid leaks,
strange odors, smoke or loss of engine
power could indicate that the emission
control system is not working properly.
1.
An improperly operating or damaged
exhaust system may allow exhaust to
enter the vehicle. Have a damaged or
improperly operating exhaust system
inspected and repaired immediately.
The vehicle has run out of fuel—the
engine may misfire or run poorly.
2. Poor fuel quality or water in the
fuel—the engine may misfire or run
poorly.
3. The fuel fill inlet may not have been
properly closed. See Refueling (page
121).
4. Driving through deep water—the
electrical system may be wet.
Do not make any unauthorized changes to
your vehicle or engine. By law, vehicle
owners and anyone who manufactures,
repairs, services, sells, leases, trades
vehicles, or supervises a fleet of vehicles
are not permitted to intentionally remove
an emission control device or prevent it
from working. Information about your
vehicle’s emission system is on the Vehicle
Emission Control Information Decal
located on or near the engine. This decal
also lists engine displacement
These temporary malfunctions can be
corrected by filling the fuel tank with good
quality fuel, properly closing the fuel fill
inlet or letting the electrical system dry out.
After three driving cycles without these or
any other temporary malfunctions present,
the service engine soon indicator should
stay off the next time the engine is started.
A driving cycle consists of a cold engine
startup followed by mixed city/highway
driving. No additional vehicle service is
required.
Please consult your warranty information
for complete details.
124
Fiesta (CCT)
Fuel and Refueling
If the service engine soon indicator remains
on, have your vehicle serviced at the first
available opportunity. Although some
malfunctions detected by the OBD-II may
not have symptoms that are apparent,
continued driving with the service engine
soon indicator on can result in increased
emissions, lower fuel economy, reduced
engine and transmission smoothness, and
lead to more costly repairs.
the engine. If the service engine soon
indicator blinks eight times, it means that
the vehicle is not ready for I/M testing; if
the service engine soon indicator stays on
solid, it means that the vehicle is ready for
I/M testing.
The OBD-II system is designed to check
the emission control system during normal
driving. A complete check may take several
days. If the vehicle is not ready for I/M
testing, the following driving cycle
consisting of mixed city and highway
driving may be performed:
Readiness for
Inspection/Maintenance (I/M)
Testing
15 minutes of steady driving on an
expressway/highway followed by 20
minutes of stop-and-go driving with at
least four 30-second idle periods.
Some state/provincial and local
governments may have
Inspection/Maintenance (I/M) programs
to inspect the emission control equipment
on your vehicle. Failure to pass this
inspection could prevent you from getting
a vehicle registration.
Allow the vehicle to sit for at least eight
hours without starting the engine. Then,
start the engine and complete the above
driving cycle. The engine must warm up to
its normal operating temperature. Once
started, do not turn off the engine until the
above driving cycle is complete. If the
vehicle is still not ready for I/M testing, the
above driving cycle will have to be
repeated.
If the service engine soon
indicator is on or the bulb does
not work, the vehicle may need
to be serviced. See On-Board Diagnostics.
Your vehicle may not pass the I/M test if
the service engine soon indicator is on or
not working properly (bulb is burned out),
or if the OBD-II system has determined
that some of the emission control systems
have not been properly checked. In this
case, the vehicle is considered not ready
for I/M testing.
If the vehicle’s engine or transmission has
just been serviced, or the battery has
recently run down or been replaced, the
OBD-II system may indicate that the
vehicle is not ready for I/M testing. To
determine if the vehicle is ready for I/M
testing, turn the ignition key to the on
position for 15 seconds without cranking
125
Fiesta (CCT)
Transmission
3. Press the brake pedal and move the
transmission selector lever to first or
reverse gear.
4. Release the parking brake and slowly
release the clutch pedal while slowly
pressing on the accelerator.
MANUAL TRANSMISSION
Using the Clutch
Note: Failure to fully depress the clutch
pedal to the floor may cause increased shift
efforts, prematurely wear transmission
components or damage the transmission.
During each shift, make sure you fully
depress the clutch pedal.
Note: Do not drive with your foot resting on
the clutch pedal or use the clutch pedal to
hold your vehicle at a standstill while
waiting on a hill. These actions will reduce
the life of the clutch and could nullify a
clutch warranty claim.
Recommended Shift Speeds
Note: Do not move the transmission
selector lever to first gear when your vehicle
is moving faster than 15 mph (24 km/h).
This will damage the clutch.
We recommend you change gear
according to the following guide to achieve
the best fuel economy for your vehicle.
Shift from
E157512
Manual transmission vehicles have a
starter interlock that prevents cranking the
engine unless the clutch pedal is fully
depressed.
1-2
15 mph (24 km/h)
2-3
24 mph (38 km/h)
3-4
32 mph (51 km/h)
4-5
43 mph (70 km/h)
Reverse
Note: Do not move the transmission
selector lever to reverse gear when your
vehicle is moving. This can cause damage
to the transmission.
Starting Your Vehicle
WARNING
Make sure the floor mat is positioned
correctly so that it does not interfere
with the full extension of the clutch
pedal.
1.
Fully depress the clutch pedal to
disengage clutch.
2. Move the transmission selector lever
to the neutral position and wait at least
three seconds before moving it to
reverse.
1.
Make sure the parking brake is fully set
and move the transmission selector
lever to the neutral position.
2. Fully depress the clutch pedal then
start the engine.
126
Fiesta (CCT)
Recommended
speed
Transmission
If reverse gear is not fully engaged, press
the clutch pedal down and move the
transmission selector lever to the neutral
position. Release the clutch pedal for a
moment, depress the clutch again and
then move the transmission selector lever
to reverse.
Parking Your Vehicle
WARNING
Do not park your vehicle with the
transmission selector lever in the
neutral position. Your vehicle may
move unexpectedly and injure someone.
Move the transmission selector lever to
first gear and set the parking brake fully.
E144954
Manual transmission vehicles have a
starter interlock that prevents cranking the
engine unless the clutch pedal is fully
depressed.
Starting Your Vehicle
To park your vehicle:
WARNING
1.
Press the brake pedal and move the
transmission selector lever to the
neutral position.
2. Fully apply the parking brake, hold the
clutch pedal down, then move the
transmission selector lever to first gear.
3. Switch the ignition off.
Make sure the floor mat is positioned
correctly so that it does not interfere
with the full extension of the clutch
pedal.
1.
Make sure the parking brake is fully set
and move the transmission selector
lever to the neutral position.
2. Fully depress the clutch pedal then
start the engine.
3. Press the brake pedal and move the
transmission selector lever to first or
reverse gear.
4. Release the parking brake and slowly
release the clutch pedal while slowly
pressing on the accelerator.
MANUAL TRANSMISSION 1.6L ECOBOOST™
Using the Clutch
Note: Failure to fully depress the clutch
pedal to the floor may cause increased shift
efforts, prematurely wear transmission
components or damage the transmission.
During each shift, make sure you fully
depress the clutch pedal.
Note: Do not drive with your foot resting on
the clutch pedal or use the clutch pedal to
hold your vehicle at a standstill while
waiting on a hill. These actions will reduce
the life of the clutch and could nullify a
clutch warranty claim.
Recommended Shift Speeds
Note: Do not move the transmission
selector lever to first gear when your vehicle
is moving faster than 15 mph (24 km/h).
This will damage the clutch.
127
Fiesta (CCT)
Transmission
We recommend you change gear
according to the following guide to achieve
the best fuel economy for your vehicle.
Shift from
If reverse gear is not fully engaged, press
the clutch pedal down and move the
transmission selector lever to the neutral
position. Release the clutch pedal for a
moment, then raise the collar and move
the transmission selector lever to reverse
again.
Recommended
speed
1-2
12 mph (19 km/h)
2-3
23 mph (37 km/h)
3-4
32 mph (51 km/h)
4-5
41 mph (66 km/h)
5-6
42 mph (67 km/h)
Parking Your Vehicle
WARNING
Do not park your vehicle with the
transmission selector lever in the
neutral position. Your vehicle may
move unexpectedly and injure someone.
Move the transmission selector lever to
first gear and set the parking brake fully.
Reverse
Note: Do not move the transmission
selector lever to reverse gear when your
vehicle is moving. This can cause damage
to the transmission.
To park your vehicle:
1.
Press the brake pedal and move the
transmission selector lever to the
neutral position.
2. Fully apply the parking brake, hold the
clutch pedal down, then move the
transmission selector lever to first gear.
3. Switch the ignition off.
1.
Fully depress the clutch pedal to
disengage the clutch.
2. Move the transmission selector lever
to the neutral position and wait at least
three seconds before moving it to
reverse.
3. Raise the collar below the transmission
selector lever to select reverse gear.
Note: This is a lockout feature which
protects the transmission from accidentally
engaging reverse gear when intending to
select first gear.
AUTOMATIC TRANSMISSION
WARNINGS
Always set the parking brake fully
and make sure the gearshift is
latched in P (Park). Turn the ignition
to the off position and remove the key
whenever you leave your vehicle.
Do not apply the brake pedal and
accelerator pedal simultaneously.
Applying both pedals simultaneously
for more than three seconds will limit
engine rpm, which may result in difficulty
maintaining speed in traffic and could lead
to serious injury.
E99067
128
Fiesta (CCT)
Transmission
Note: When you switch the ignition off, the
transmission will carry out a series of checks.
You may hear slight clicking sounds. This is
normal.
+
Manual shift up
-
Manual shift down
Press the button on the front of the
transmission selector lever to change to
each position.
We have designed your vehicle to improve
fuel economy by reducing fuel usage
compared to a traditional torque converter
automatic transmission. When you take
your foot off the accelerator pedal and
your vehicle begins to slow down, this can
feel like a light to medium braking
sensation.
The transmission selector lever position
will be shown in the information display.
P (Park)
WARNINGS
You must only select park when your
vehicle is stationary. Selecting park
when your vehicle is moving will
damage the transmission and may lead to
an accident or injury.
Selector Lever Positions
WARNING
You must press the brake pedal to
apply the brakes before moving the
transmission selector lever. Failure
to keep the brakes applied until you are
ready to move off may lead to an accident
or injury.
You must move the transmission
selector lever to position park and
fully apply the parking brake before
you leave your vehicle. Failure to leave your
vehicle securely parked may lead to an
accident or injury.
With the transmission selector lever in
park, power is not transmitted to the drive
wheels and the transmission is locked, your
vehicle will not move. You can start the
engine with the transmission selector lever
in park.
Note: An audible warning will sound if you
open the driver's door and you have not
moved the transmission selector lever to
park.
R (Reverse)
WARNING
E161746
P
Park
R
Reverse
N
Neutral
D
Drive
S
Sport mode or manual shifting
You must only select reverse when
your vehicle is stationary and the
engine is at idle speed. Selecting
reverse when your vehicle is moving or at
a high engine speed may damage the
transmission or lead to an accident or
injury.
129
Fiesta (CCT)
Transmission
Sport mode will remain on until you either
shift manually up or down the gears using
the + or - buttons on the side of the
transmission selector lever or you move
the transmission selector lever to drive.
With the transmission selector lever in
reverse, power is transmitted to the drive
wheels to allow your vehicle to move
backward.
Note: Always come to a complete stop
before shifting the transmission selector
lever out of reverse.
Sport mode also provides a downshift
function. See Downshift in this section.
N (Neutral)
Manual Shifting
With the transmission selector lever in
neutral, power is not transmitted to the
drive wheels and the transmission is not
locked, it is possible your vehicle will move
if the brakes are not applied. You can start
the engine with the transmission selector
lever in this position.
Do not permanently hold the + or buttons in. This may damage the
transmission and may lead to an
accident or injury.
D (Drive)
Press the + button to shift up and the button to shift down.
WARNING
Gears may be skipped by pressing the + or
- buttons repeatedly at short intervals.
With the transmission selector lever in
drive, your vehicle will shift automatically
through the forward gears.
We recommend you upshift according to
the following guide to achieve the best fuel
economy for your vehicle.
The transmission will select the
appropriate gear for optimum vehicle
performance and economy based on
ambient temperature, road gradient,
vehicle load, speed and your driving style.
Drive mode provides a downshift function.
See Downshift in this section.
Note: A shift will occur only when your
vehicle and engine speeds are appropriate.
Note: You may temporarily override the
current gear selected using the + or buttons.
Sport Mode and Manual Shifting
Shift From
Recommended
Speed
1-2
15 mph (24 km/h)
2-3
25 mph (40 km/h)
3-4
40 mph (64 km/h)
4-5
45 mph (72 km/h)
5-6
50 mph (80 km/h)
Sport Mode
Manual mode also provides a downshift
function. See Downshift in this section.
With the transmission selector lever in
sport mode, gears are selected quicker and
at higher engine speeds.
Note: The transmission will automatically
upshift if the engine speed is too high or
downshift if the engine speed is too low.
130
Fiesta (CCT)
Transmission
Hints on Driving with an Automatic
Transmission
Downshift
Press the accelerator pedal fully with the
transmission selector lever in either drive,
sport mode or manual shifting position to
select a lower gear for optimum
performance. Release the accelerator
pedal when you no longer require
downshift.
WARNINGS
Do not apply the brake and
accelerator pedals simultaneously
for more than three seconds, this
limits engine rpm and labors the
transmission. This may make it difficult to
maintain speeds in traffic and lead to an
accident or injury.
If Your Vehicle Gets Stuck In Mud or
Snow
Do not idle the engine for long
periods of time in drive with the
brakes applied. This could damage
the transmission and may lead to an
accident or injury.
If your vehicle gets stuck in mud or snow,
it may be rocked out by shifting between
forward and reverse gears, stopping
between shifts in a steady pattern. Press
lightly on the accelerator in each gear.
Note: Do not rock your vehicle if the engine
is not at normal operating temperature,
damage to the transmission may occur.
Note: The system carries out a series of
checks when you switch the ignition on and
off. You may hear clicking sounds. This is
normal.
Note: Do not rock your vehicle for more
than a minute, damage to the transmission
and tires may occur or the engine may
overheat.
Starting
1.
Press the brake pedal to apply the
brakes.
2. Move the transmission selector lever
to reverse, drive or sport mode.
3. Release the parking brake.
4. Release the brake pedal and press the
accelerator pedal.
Emergency Park Position Release
Lever
WARNINGS
Do not drive your vehicle until you
verify that the brake lamps are
working. Failure to adhere to warning
indicators may lead to an accident or injury.
Stopping
If the parking brake is fully released
but the brake warning lamp remains
illuminated, the brakes may not be
working correctly. See an authorized
dealer. Failure to adhere to warning
indicators may lead to an accident or injury.
1.
Release the accelerator pedal and
press the brake pedal.
2. Apply the parking brake.
3. Move the transmission selector lever
to neutral or park.
Use the emergency park position release
lever to move the transmission selector
lever from the park position in the event of
a malfunction or if your vehicle battery has
no charge.
131
Fiesta (CCT)
Transmission
HILL START ASSIST (IF EQUIPPED)
WARNINGS
The system does not replace the
parking brake. When you leave your
vehicle, always apply the parking
brake and move the transmission selector
lever into position P (Park).
3
E142193
You must remain in your vehicle once
you have activated the system.
2
During all times, you are responsible
for controlling your vehicle,
supervising the system and
intervening, if required.
1.
Apply the parking brake and switch the
ignition off before carrying out this
procedure.
2. Remove the retaining screw.
3. Remove the center console side panel.
If the engine is revved excessively, or
if a malfunction is detected, the
system will be deactivated.
The system makes it easier to pull away
when your vehicle is on a slope without the
need to use the parking brake.
4
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope. This
is an advantage when pulling away on a
slope, (for example from a car park ramp,
traffic lights or when reversing uphill into
a parking space).
E142214
4. Press the brake pedal. Using a suitable
tool rotate the lever forward while
pulling the transmission selector lever
out of the park position.
Note: The emergency park position release
lever is pink.
The system will activate automatically on
any slope which can result in significant
vehicle rollback.
Note: See an authorized dealer as soon as
possible if this procedure is used.
Using Hill Start Assist
1.
132
Fiesta (CCT)
Press the brake pedal to bring your
vehicle to a complete standstill. Keep
the brake pedal pressed.
Transmission
2. If the sensors detect that your vehicle
is on a slope, the system will be
activated automatically.
3. When you remove your foot from the
brake pedal, your vehicle will remain
on the slope without rolling away for
approximately two or three seconds.
This hold time will automatically be
extended if you are in the process of
driving off.
4. Drive off in the normal manner. The
brakes will be released automatically.
Switching the System On and Off
Note: The system can only be switched on
and off for manual transmissions.
Note: Once you have switched off the
system, it will remain off until you switch it
on again.
Your vehicle comes with the system
already enabled. If desired, you can disable
the feature: See General Information
(page 86).
133
Fiesta (CCT)
Brakes
GENERAL INFORMATION
HINTS ON DRIVING WITH
ANTI-LOCK BRAKES
WARNING
Note: When the system is operating, the
brake pedal will pulse and may travel
further. Maintain pressure on the brake
pedal. You may also hear a noise from the
system. This is normal.
The system does not relieve you of
your responsibility to drive with due
care and attention.
Note: Occasional brake noise is normal. If
a metal-to-metal, continuous grinding or
continuous squeal sound is present, the
brake linings may be worn-out. If the vehicle
has continuous vibration or shudder in the
steering wheel while braking, have your
vehicle checked by an authorized dealer.
The anti-lock braking system will not
eliminate the risks when:
• you drive too closely to the vehicle in
front of you
• your vehicle is hydroplaning
• you take corners too fast
• the road surface is poor.
Note: Brake dust may accumulate on the
wheels, even under normal driving
conditions. Some dust is inevitable as the
brakes wear. See Cleaning the Alloy
Wheels (page 207).
PARKING BRAKE
Vehicles With Automatic
Transmission
Wet brakes result in reduced braking
efficiency. Gently press the brake pedal a
few times when driving from a car wash or
standing water to dry the brakes.
WARNING
Always set the parking brake fully
and leave your vehicle with the
transmission selector lever in
position P.
Emergency Brake Assist
Emergency brake assist detects when you
brake heavily by measuring the rate at
which you press the brake pedal. It
provides maximum braking efficiency as
long as you press the pedal. Emergency
brake assist can reduce stopping distances
in critical situations.
Note: If you park your vehicle on a hill and
facing uphill move the transmission selector
lever to position P and turn the steering
wheel away from the curb.
Note: If you park your vehicle on a hill and
facing downhill move the transmission
selector lever to position P and turn the
steering wheel toward the curb.
Anti-lock Brake System
This system helps you maintain steering
control and vehicle stability during
emergency stops by keeping the brakes
from locking.
Vehicles With Manual
Transmission
Note: If you park your vehicle on a hill and
facing uphill select first gear and turn the
steering wheel away from the curb.
134
Fiesta (CCT)
Brakes
Note: If you park your vehicle on a hill and
facing downhill select reverse gear and turn
the steering wheel toward the curb.
All Vehicles
Note: Do not press the release button while
pulling the lever up.
To apply the parking brake:
1. Press the foot brake pedal firmly.
2. Pull the parking brake lever up to its
fullest extent.
To release the parking brake:
1. Press the brake pedal firmly.
2. Pull the lever up slightly.
3. Press the release button and push the
lever down.
135
Fiesta (CCT)
Stability Control (If Equipped)
PRINCIPLE OF OPERATION
Electronic Stability Program
B
WARNINGS
The system does not relieve you of
your responsibility to drive with due
care and attention. Failure to drive
with due care and attention could lead to
loss of vehicle control.
B
B
Vehicle modifications involving
braking system, aftermarket roof
racks, suspension, steering system,
tire construction and wheel and tire size
may change the handling characteristics
of the vehicle and may adversely affect
the performance of the AdvanceTrac
system. In addition, installing any stereo
loudspeakers may interfere with and
adversely affect the AdvanceTrac system.
Install any aftermarket stereo loudspeaker
as far as possible from the front center
console, the tunnel, and the front seats in
order to minimize the risk of interfering with
the AdvanceTrac sensors. Reducing the
effectiveness of the AdvanceTrac system
could lead to an increased risk of loss of
vehicle control, vehicle rollover, personal
injury and death.
A
A
A
E72903
A
Without Advance Trac
B
With Advance Trac
The system supports stability when your
vehicle starts to slide away from your
intended path. This is performed by braking
individual wheels and reducing engine
torque as needed.
The system also provides an enhanced
traction control function by reducing
engine torque if the wheels spin when you
accelerate. This improves your ability to
pull away on slippery roads or loose
surfaces, and improves comfort by limiting
wheel spin in hairpin bends.
Remember that even advanced
technology cannot defy the laws of
physics. It’s always possible to lose
control of a vehicle due to inappropriate
driver input for the conditions. Aggressive
driving on any road condition can cause
you to lose control of your vehicle
increasing the risk of personal injury or
property damage. Activation of the
AdvanceTrac system is an indication that
at least some of the tires have exceeded
their ability to grip the road; this could
reduce the operator’s ability to control the
vehicle potentially resulting in a loss of
vehicle control, vehicle rollover, personal
injury and death. If your AdvanceTrac
system activates, SLOW DOWN.
Stability Control Warning Lamp
While driving, it flashes when the system
is operating. See Warning Lamps and
Indicators (page 79).
136
Fiesta (CCT)
B
Stability Control (If Equipped)
Switching the System Off
USING STABILITY CONTROL
Press and hold the switch for
approximately five seconds. It will
illuminate and a message will be displayed
in the information display. Press the switch
again to return the system to normal mode.
Note: The system automatically switches
on every time you switch the ignition on.
You can switch the system on and off using
the information display. See General
Information (page 86).
USING STABILITY CONTROL 1.6L ECOBOOST™
E156922
Note: The system will switch on
automatically every time you switch the
ignition on.
Note: You can also switch the system off
and on using the information display. See
Information Displays (page 86).
Switching Sport Mode On
Press the switch. It will illuminate and a
message will be displayed in the
information display. Press the switch again
to return the system to normal mode.
Note: In this mode stability control is only
reduced and not switched off completely.
137
Fiesta (CCT)
Parking Aids (If Equipped)
Note: The outer sensors may detect the
side walls of a garage. If the distance
between the outer sensor and the side wall
remains constant for three seconds, the
tone will switch off. As you continue, the
inner sensors will detect rearward objects.
PRINCIPLE OF OPERATION
WARNINGS
The system does not relieve you of
your responsibility to drive with due
care and attention.
If your vehicles has a trailer tow
module not approved by us, the
system may not correctly detect
obstacles.
PARKING AID
WARNINGS
To help avoid personal injury, read
and understand the limitations of the
system as contained in this section.
Sensing is only an aid for some (generally
large and fixed) objects when moving in
reverse on a flat surface at parking speeds.
Traffic control systems, inclement
weather, air brakes and external motors
and fans may also affect the function of
the sensing system. This may include
reduced performance or a false activation.
The sensors may not detect objects
in heavy rain or other conditions that
cause disruptive reflections.
The sensors may not detect objects
with surfaces that absorb ultrasonic
waves.
The system does not detect
obstacles moving away from your
vehicle. They will only be detected
shortly after they start to move toward
your vehicle.
To help avoid personal injury, always
use caution when moving in reverse
and when using the sensing system.
Take particular care when reversing
with a tow ball arm or rear fitted
accessories e.g. a bicycle carrier, as
the rear parking aid will only indicate the
distance from the bumper to the obstacle.
This system is not designed to
prevent contact with small or moving
objects. The system is designed to
provide a warning to assist the driver in
detecting large stationary objects to avoid
damaging the vehicle. The system may not
detect smaller objects, particularly those
close to the ground.
If you use a high pressure spray to
wash your vehicle, only spray the
sensors briefly from a distance not
less than 8 inches (20 centimeters).
Certain add-on devices such as large
trailer hitches, bike or surfboard racks
and any device that may block the
normal detection zone of the system, may
create false audible warnings.
Note: If your vehicle has a tow ball arm, the
system is switched off automatically when
any trailer lamps (or lighting boards) are
connected to the 13-pin socket via a trailer
tow module we have approved.
Note: Keep the sensors free from dirt, ice
and snow. Do not clean with sharp objects.
Note: Keep the sensors located on the
bumper or fascia free from snow, ice and
large accumulations of dirt. If the sensors
are covered, the system’s accuracy can be
affected. Do not clean the sensors with
sharp objects.
Note: The system may emit false tones if
it detects a signal using the same frequency
as the sensors or if your vehicle is fully laden.
138
Fiesta (CCT)
Parking Aids (If Equipped)
The system detects certain objects when
you move the transmission selector lever
to position R (reverse):
• and your vehicle is moving toward a
stationary object at a speed of 3 mph
(5 km/h) or less
• but your vehicle is not moving, and a
moving object is approaching the rear
of your vehicle at a speed of 3 mph (5
km/h) or less
• and your vehicle is moving at a speed
of less than 3 mph (5 km/h) and a
moving object is approaching the rear
of your vehicle at a speed of less than
3 mph (5 km/h).
Note: If your vehicle sustains damage to
the bumper or fascia, leaving it misaligned
or bent, the sensing zone may be altered
causing inaccurate measurement of
obstacles or false alarms.
The system warns you of obstacles within
a certain range of the bumper area.
When receiving a detection warning, the
radio volume is reduced to a
predetermined level. After the warning
goes away, the radio volume returns to the
previous level.
Rear Sensing System
The rear sensors are only active when you
move the transmission selector lever to
position R (reverse). As your vehicle moves
closer to the obstacle, the rate of the
audible warning increases. When the
obstacle is fewer than 12 inches (30
centimeters) away, the audible warning
sounds continuously. If a stationary or
receding object is detected farther than 12
inches (30 centimeters) from the side of
your vehicle, the audible warning sounds
for only three seconds. Once the system
detects an object approaching, the audible
warning sounds again.
Move the transmission selector lever from
position R (reverse) to turn the system off.
If a fault is present in the system, a warning
message appears in the information
display and does not allow you to switch
the system on.
REAR VIEW CAMERA (IF EQUIPPED)
WARNINGS
The operation of the camera may
vary depending on the ambient
temperature, vehicle and road
conditions.
The distances shown in the display
may differ from the actual distance.
Do not place objects in front of the
camera.
A
The camera is located on the liftgate near
the handle.
E130178
A
Coverage area of up to 72 inches
(183 centimeters) from the rear
bumper (with a decreased
coverage area at the outer
corners of the bumper).
139
Fiesta (CCT)
Parking Aids (If Equipped)
The lines show the distance from the outer
edge of the front tire plus two inches (51
millimeters) and the rear bumper.
C
D
C
B
B
A
A
E147796
Switching the Rear View Camera
On
WARNING
The camera may not detect objects
that are close to your vehicle.
Switch the ignition and the audio unit on.
Move the transmission selector lever to
position R (reverse).
The image is displayed on the screen.
The camera may not operate correctly in
the following conditions:
• Dark areas.
• Intense light.
• If the ambient temperature increases
or decreases rapidly.
• If the camera is wet, for example in rain
or high humidity.
• If the camera's view is obstructed, for
example by mud.
Using the Display
WARNINGS
Obstacles above the camera position
will not be shown. Inspect the area
behind your vehicle if necessary.
E142132
Marks are for general guidance only,
and are calculated for vehicles in
maximum load conditions on an
even road surface.
140
Fiesta (CCT)
A
Red - Zone
B
Amber - Zone
Parking Aids (If Equipped)
C
Green - Zone
D
Black - center line of the
projected vehicle path
Note: When reversing with a trailer, the lines
on the screen are not shown. The camera
will show your vehicle direction and not the
trailer.
Switching the Rear View Camera
Off
Note: The system will automatically switch
off once your vehicle speed has reached
approximately 6 mph (10 km/h).
Disengage reverse gear.
Vehicles with Parking Aid
The display will additionally show a
colored distance bar. This guide indicates
the distance from the rear bumper to the
detected obstacle.
These are color coded as follows:
• Green - Zone
• Amber - Zone
• Red - Zone
141
Fiesta (CCT)
Cruise Control (If Equipped)
PRINCIPLE OF OPERATION
WARNING
The system does not relieve you of
your responsibility to drive with due
care and attention.
Cruise control allows you to control your
speed using the switches on the steering
wheel. You can use cruise control when
you exceed approximately 20 mph (30
km/h).
E102679
USING CRUISE CONTROL
The cruise controls are located on the
steering wheel.
WARNINGS
Do not use cruise control in heavy
traffic, on winding roads or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
Switching Cruise Control On
When you are going downhill, your
speed may increase above the set
speed. The system will not apply the
brakes. Change down a gear to assist the
system in maintaining the set speed.
Failure to do so could result in loss of
vehicle control, serious injury or death.
Setting a Speed
Press and release ON.
The indicator will display in the
instrument cluster.
E71340
1. Accelerate to the desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator
pedal.
Changing the Set Speed
Note: Cruise control will disengage if your
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
•
•
•
Press and hold SET+ or SET-. Release
the control when you reach the desired
speed.
Press and release SET+ or SET-. The
set speed will change in approximately
1 mph (2 km/h) increments.
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release SET+.
Canceling the Set Speed
Press and release CAN, or tap the brake
pedal. The set speed will not be erased.
142
Fiesta (CCT)
Cruise Control (If Equipped)
Resuming the Set Speed
Press and release RES.
Switching Cruise Control Off
Note: You will erase the set speed if you
switch the system off.
Press and release OFF or switch the
ignition off.
143
Fiesta (CCT)
Driving Aids
Steering Tips
STEERING
If the steering wanders or pulls, check for:
• an improperly inflated tire
• uneven tire wear
• loose or worn suspension components
• loose or worn steering components
• improper vehicle alignment
Electric Power Steering
WARNING
Obtain immediate service if a system
error is detected. You may not notice
any difference in the feel of your
steering, but a serious condition may exist.
Failure to do so may result in loss of
steering control.
A high crown in the road or high crosswinds
may also make the steering seem to
wander or pull.
Note: Your vehicle is equipped with an
electric power-assisted steering system.
There is no fluid reservoir to check or fill.
Adaptive Learning
The EPS system adaptive learning helps
correct for road irregularities and improves
overall handling and steering feel. It
communicates with the vehicle's brake
system to help operate advanced stability
control and accident avoidance systems.
Additionally, whenever the battery is
disconnected or a new battery installed,
the vehicle must be driven a short distance
before the strategy is relearned and all
systems are reactivated.
The electric power steering system has
diagnostic checks that continuously
monitor the system to ensure proper
operation of the electronic system. When
an electronic error is detected, a message
will be displayed in the information display.
If this happens, stop the vehicle in a safe
place, and turn off the engine. After at least
10 seconds, reset the system by restarting
the engine, and watch the information
display for a steering message. If a steering
message returns, or returns while driving,
take the vehicle to your dealer to have it
checked.
If your vehicle loses electrical power while
you are driving (or if the ignition is turned
off), you can steer the vehicle manually,
but it takes more effort. Extreme
continuous steering may increase the effort
it takes for you to steer. This occurs to
prevent internal overheating and
permanent damage to your steering
system. If this should occur, you will neither
lose the ability to steer the vehicle
manually nor will it cause permanent
damage. Typical steering and driving
maneuvers will allow the system to cool
and steering assist will return to normal.
144
Fiesta (CCT)
Load Carrying
vehicle will provide maximum
return of vehicle design
performance. Before loading your
vehicle, familiarize yourself with
the following terms for
determining your vehicle’s weight
ratings, with or without a trailer,
from the vehicle’s Tire Label or
Safety Compliance Certification
Label:
GENERAL INFORMATION
WARNINGS
Use load securing straps to an
approved standard, e.g. DIN.
Make sure that you secure all loose
items properly.
Place luggage and other loads as low
and as far forward as possible within
the luggage or loadspace.
Do not drive with the liftgate or rear
door open. Exhaust fumes may enter
your vehicle.
Base Curb Weight - is the weight
of the vehicle including a full tank
of fuel and all standard
equipment. It does not include
passengers, cargo, or optional
equipment.
Do not exceed the maximum front
and rear axle loads for your vehicle.
See Load Limit (page 145).
Do not allow items to contact the
rear windows.
Vehicle Curb Weight - is the
weight of your new vehicle when
you picked it up from your
authorized dealer plus any
aftermarket equipment.
LOAD LIMIT
Vehicle Loading - with and without
a Trailer
This section will guide you in the
proper loading of your vehicle,
trailer or both, to keep your loaded
vehicle weight within its design
rating capability, with or without
a trailer. Properly loading your
PAYLOAD
E143816
145
Fiesta (CCT)
Load Carrying
Payload - is the combined weight
of cargo and passengers that the
vehicle is carrying. The maximum
payload for your vehicle can be
found on the Tire Label on the
B-Pillar or the edge of the driver
door (vehicles exported outside
the US and Canada may not have
a Tire Label). Look for “THE
COMBINED WEIGHT OF
OCCUPANTS AND CARGO
SHOULD NEVER EXCEED XXX
kg OR XXX lb.” for maximum
payload. The payload listed on the
Tire Label is the maximum
payload for the vehicle as built by
the assembly plant. If you install
any aftermarket or
authorized-dealer installed
equipment on the vehicle, you
must subtract the weight of the
equipment from the payload listed
on the Tire Label in order to
determine the new payload.
WARNING
The appropriate loading capacity of
your vehicle can be limited either by
volume capacity (how much space
is available) or by payload capacity (how
much weight the vehicle should carry).
Once you have reached the maximum
payload of your vehicle, do not add more
cargo, even if there is space available.
Overloading or improperly loading your
vehicle can contribute to loss of vehicle
control and vehicle rollover.
Example only:
E142516
146
Fiesta (CCT)
Load Carrying
E142517
CARGO
E143817
GAWR (Gross Axle Weight
Rating) - is the maximum
allowable weight that can be
carried by a single axle (front or
rear). These numbers are shown
on the Safety Compliance
Certification Label. The label shall
be affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position. The total load on each
axle must never exceed its
Gross Axle Weight Rating.
Cargo Weight - includes all
weight added to the Base Curb
Weight, including cargo and
optional equipment. When towing,
trailer tongue load or king pin
weight is also part of cargo weight.
GAW (Gross Axle Weight) - is
the total weight placed on each
axle (front and rear) including
vehicle curb weight and all
payload.
147
Fiesta (CCT)
Load Carrying
Note: For trailer towing information refer
to the RV and Trailer Towing Guide available
at an authorized dealer.
GVW
E143818
Safety Compliance Certification
Label. The label shall be affixed
to either the door hinge pillar,
door-latch post, or the door edge
that meets the door-latch post,
next to the driver's seating
position. The Gross Vehicle
Weight must never exceed the
Gross Vehicle Weight Rating.
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight, plus
cargo, plus passengers.
GVWR (Gross Vehicle Weight
Rating) - is the maximum
allowable weight of the fully
loaded vehicle (including all
options, equipment, passengers
and cargo). It is shown on the
Example only:
E142523
148
Fiesta (CCT)
Load Carrying
E142524
WARNING
Exceeding the Safety Compliance
Certification Label vehicle weight
rating limits could result in
substandard vehicle handling or
performance, engine, transmission and/or
structural damage, serious damage to the
vehicle, loss of control and personal injury.
GCW
GVW
E143819
damage. (Important: The towing
vehicle’s braking system is rated
for operation at Gross Vehicle
Weight Rating, not at Gross
Combined Weight Rating.)
Separate functional brakes should
be used for safe control of towed
vehicles and for trailers where the
Gross Combined Weight of the
GCW (Gross Combined Weight)
- is the Gross Vehicle Weight plus
the weight of the fully loaded
trailer.
GCWR (Gross Combined
Weight Rating) - is the maximum
allowable weight of the vehicle
and the loaded trailer, including
all cargo and passengers, that the
vehicle can handle without risking
149
Fiesta (CCT)
Load Carrying
towing vehicle plus the trailer
exceed the Gross Vehicle Weight
Rating of the towing vehicle. The
Gross Combined Weight must
never exceed the Gross
Combined Weight Rating.
WARNINGS
Do not exceed the GVWR or the
GAWR specified on the Safety
Compliance Certification Label.
Do not use replacement tires with
lower load carrying capacities than
the original tires because they may
lower the vehicle’s GVWR and GAWR
limitations. Replacement tires with a higher
limit than the original tires do not increase
the GVWR and GAWR limitations.
Maximum Loaded Trailer
Weight - is the highest possible
weight of a fully loaded trailer the
vehicle can tow. It assumes a
vehicle with mandatory options,
driver and front passenger weight
(150 pounds [68 kilograms]
each), no cargo weight (internal
or external) and a tongue load of
10–15% (conventional trailer) or
king pin weight of 15–25% (fifth
wheel trailer). Consult an
authorized dealer (or the RV and
Trailer Towing Guide available at
an authorized dealer) for more
detailed information.
Exceeding any vehicle weight rating
limitation could result in serious
damage to the vehicle and/or
personal injury.
Steps for determining the
correct load limit:
1. Locate the statement "The
combined weight of occupants
and cargo should never exceed
XXX kg or XXX lb." on your
vehicle’s placard.
2. Determine the combined weight
of the driver and passengers that
will be riding in your vehicle.
Tongue Load or Fifth Wheel
King Pin Weight - refers to the
amount of the weight that a trailer
pushes down on a trailer hitch.
3. Subtract the combined weight
of the driver and passengers from
XXX kg or XXX lb.
Examples: For a 5000 pound
(2268 kilogram) conventional
trailer, multiply 5000 by 0.10 and
0.15 to obtain a proper tongue
load range of 500 to 750 pounds
(227 to 340 kilograms). For an
11500 pound (5216 kilogram) fifth
wheel trailer, multiply by 0.15 and
0.25 to obtain a proper king pin
load range of 1725 to 2875 pounds
(782 to 1304 kilograms).
150
Fiesta (CCT)
Load Carrying
4. The resulting figure equals the
available amount of cargo and
luggage load capacity. For
example, if the “XXX” amount
equals 1,400 lb. and there will be
five 150 lb. passengers in your
vehicle, the amount of available
cargo and luggage load capacity
is 650 lb. (1400-750 (5 x 150) =
650 lb.)
30 pounds (13.5 kilograms) each.
The calculation would be: 1400 (5 x 220) - (5 x 30) = 1400 - 1100
- 150 = 150 pounds. Yes, you have
enough load capacity in your
vehicle to transport four friends
and your golf bags. In metric units,
the calculation would be: 635
kilograms - (5 x 99 kilograms) (5 x 13.5 kilograms) = 635 - 495 67.5 = 72.5 kilograms.
5. Determine the combined weight
of luggage and cargo being loaded
on the vehicle. That weight may
not safely exceed the available
cargo and luggage load capacity
calculated in Step 4.
*Suppose your vehicle has a
1400-pound (635-kilogram) cargo
and luggage capacity. You and
one of your friends decide to pick
up cement from the local home
improvement store to finish that
patio you have been planning for
the past two years. Measuring the
inside of the vehicle with the rear
seat folded down, you have room
for twelve 100-pound
(45-kilogram) bags of cement. Do
you have enough load capacity to
transport the cement to your
home? If you and your friend each
weigh 220 pounds (99 kilograms),
the calculation would be: 1400 (2 x 220) - (12 x 100) = 1400 - 440
- 1200 = - 240 pounds. No, you do
not have enough cargo capacity
to carry that much weight. In
metric units, the calculation would
be: 635 kilograms - (2 x 99
kilograms) - (12 x 45 kilograms) =
635 - 198 - 540 = -103 kilograms.
You will need to reduce the load
weight by at least 240 pounds
6. If your vehicle will be towing a
trailer, load from your trailer will
be transferred to your vehicle.
Consult this manual to determine
how this reduces the available
cargo and luggage load capacity
of your vehicle.
The following gives you a few
examples on how to calculate the
available amount of cargo and
luggage load capacity:
*Suppose your vehicle has a
1400-pound (635-kilogram) cargo
and luggage capacity. You decide
to go golfing. Is there enough load
capacity to carry you, four of your
friends and all the golf bags? You
and four friends average 220
pounds (99 kilograms) each and
the golf bags weigh approximately
151
Fiesta (CCT)
Load Carrying
(104 kilograms). If you remove
three 100-pound (45-kilogram)
cement bags, then the load
calculation would be: 1400 - (2 x
220) - (9 x 100) = 1400 - 440 900 = 60 pounds. Now you have
the load capacity to transport the
cement and your friend home. In
metric units, the calculation would
be: 635 kilograms - (2 x 99
kilograms) - (9 x 45 kilograms) =
635 - 198 - 405 = 32 kilograms.
REAR UNDER FLOOR
STORAGE (IF EQUIPPED)
Adjustable Load Floor
A
The above calculations also
assume that the loads are
positioned in your vehicle in a
manner that does not overload
the Front or the Rear Gross Axle
Weight Rating specified for your
vehicle on the Safety Compliance
Certification Label. The label shall
be affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position.
B
E159476
A
Upper position
B
Lower position
The load floor can be placed in either
position on shelves located at the rear of
the luggage compartment trim.
E157606
You can hold the load floor open. Use the
stoppers located at the side of the luggage
compartment to hold the floor up.
152
Fiesta (CCT)
Load Carrying
Removing the Cover
CARGO NETS (IF EQUIPPED)
Installing and Removing the Cargo
Net
1
Installing the Cargo Net
2
E72512
E156757
1.
Raise the rear outer head restraints.
See Head Restraints (page 106).
2. Attach the top securing clips to the
head restraint outer posts.
3. Attach the bottom securing clips to the
anchor points.
Removing the Cargo Net
1.
Raise the rear outer head restraints.
See Head Restraints (page 106).
2. Detach the top and bottom securing
clips.
LUGGAGE COVERS
WARNING
Do not place objects on the luggage
cover.
153
Fiesta (CCT)
Towing
Ford Motor Company produces a towing
manual for all authorized tow truck
operators. Have your tow truck operator
refer to this manual for proper hook-up
and towing procedures for your vehicle.
TOWING A TRAILER
WARNING
Your vehicle is not approved for
trailer towing.
You can tow your vehicle from the front
with wheel lift equipment to raise the front
wheels off the ground. We recommend
that you place the rear wheels on a dolly
to prevent damage to the rear of your
vehicle.
TRANSPORTING THE VEHICLE
You can tow your vehicle from the rear with
wheel lift equipment.
Note: You must place the front wheels on
a dolly to prevent damage to the
transmission.
TOWING THE VEHICLE ON
FOUR WHEELS
Emergency Towing
If your vehicle is disabled without access
to wheel dollies, a car-hauling trailer, or a
flatbed transport vehicle it can be
flat-towed with all wheels on the ground.
You may do this under the following
conditions:
• Your vehicle is facing forward so that
it is towed in a forward direction.
• The transmission gear shift lever is
placed in position N. If the transmission
gear shift lever cannot be moved to
position N, it may need to be
overridden. See Transmission (page
126).
• Maximum speed is 35 mph (56 km/h).
• Maximum distance is 50 miles (80
kilometers).
E143886
If you need to have your vehicle towed,
contact a professional towing service or,
if you are a member of a roadside
assistance program, your roadside
assistance service provider.
It is recommended that your vehicle be
towed with a wheel lift and dollies or
flatbed equipment. Do not tow with a
slingbelt. Ford Motor Company has not
approved a slingbelt towing procedure. If
the vehicle is towed incorrectly, or by any
other means, vehicle damage may occur.
154
Fiesta (CCT)
Towing
Recreational Towing
2. Switch the ignition to the on (II)
position.
3. Press the brake pedal, then move the
gearshift to the neutral position.
4. Wait for a message indicating that the
transmission is ready in the information
and entertainment display, then switch
the ignition off and release the brake
pedal.
5. Disconnect the negative (black) cable
from the battery. The anti-theft system
is disabled until the battery cable is
reconnected. See Changing the 12V
Battery (page 186).
Note: The maximum towing speed is 70
mph (113 km/h).
Note: Put your climate control system in
recirculated air mode to prevent exhaust
fumes from entering the vehicle. See
Climate Control (page 98).
Follow these guidelines if you have a need
for recreational (RV) towing. An example
of recreational towing would be towing
your vehicle behind a motorhome. These
guidelines are designed to ensure that your
transmission is not damaged.
Vehicles with a Manual Transmission
Your vehicle can be towed with all four
wheels on the ground or with the front
wheels off the ground by using a tow dolly.
If you are using a tow dolly follow the
instructions specified by the equipment
provider. If you tow your vehicle with all
wheels on the ground, follow these
instructions:
Note: There is no limit on towing distance.
After towing, start the engine within 15
minutes of reconnecting the battery cable.
See Changing the 12V Battery (page 186).
1.
Tow only with your vehicle in the
forward direction. Release the parking
brake.
2. Place the transmission in neutral.
3. Place the ignition in the accessory
position. See Starting and Stopping
the Engine (page 114).
Note: Do not exceed 70 mph (113 km/h)
when towing your vehicle.
Vehicles with an Automatic
Transmission - with Keyless Starting
Vehicles with an Automatic
Transmission - with Ignition Switch
1. Release the parking brake.
2. Switch the ignition on by pressing the
keyless start button, but do not apply
the brake pedal.
3. Press the brake pedal, then move the
gearshift to the neutral position.
Release the brake pedal.
4. Wait for a message indicating that the
transmission is ready in the information
and entertainment display, then switch
the ignition off by pressing the keyless
start button.
Note: There must be battery power to
properly move the transmission’s internal
components to neutral in step 3. Also,
moving the gearshift to the neutral position
without first turning the ignition to the on II
position limits the towing capability to 35
mph (56 km/h) and 50 miles (80
kilometers).
Note: There must be battery power to
properly move the transmission’s internal
components to neutral in step 3. Also,
moving the gearshift to the neutral position
without first turning the ignition to the on II
position limits the towing capability to 35
mph (56 km/h) and 50 miles (80
kilometers).
1.
Release the parking brake.
155
Fiesta (CCT)
Towing
5. Disconnect the negative (black) cable
from the battery. The door key is
needed to lock and unlock doors when
the battery cable is disconnected. Also,
the anti-theft system is disabled until
the battery cable is reconnected. See
Changing the 12V Battery (page 186).
Note: The maximum towing speed is 70
mph (113 km/h).
Note: There is no limit on towing distance.
After towing, start the engine within 15
minutes of reconnecting the battery cable.
See Changing the 12V Battery (page 186).
156
Fiesta (CCT)
Driving Hints
If driving through deep or standing water
is unavoidable, proceed very slowly. Never
drive through water that is higher than the
bottom of the wheel rims (for cars) or the
bottom of the hubs (for trucks).
BREAKING-IN
Tires
WARNING
New tires need to be run-in for
approximately 300 miles (500
kilometers). During this time, you
may experience different driving
characteristics.
Brakes and Clutch
WARNING
Avoid heavy use of the brakes and
clutch if possible for the first 100
miles (150 kilometers) in town and
for the first 1000 miles (1500 kilometers)
on freeways.
E142667
When driving through water, traction or
brake capability may be limited. Also,
water may enter your engine’s air intake
and severely damage your engine or your
vehicle may stall.
Engine
Once through the water, always dry the
brakes by moving your vehicle slowly while
applying light pressure on the brake pedal.
Wet brakes do not stop the vehicle as
quickly as dry brakes.
WARNING
Avoid driving too fast during the first
1000 miles (1500 kilometers). Vary
your speed frequently and change
up through the gears early. Do not labor
the engine.
ECONOMICAL DRIVING
COLD WEATHER
PRECAUTIONS
Fuel economy is affected by several things
such as how you drive, the conditions you
drive under and how you maintain your
vehicle.
The functional operation of some
components and systems can be affected
at temperatures below -13°F (-25°C).
There are some things to keep in mind that
may improve your fuel economy:
• Accelerate and slow down in a smooth,
moderate fashion.
• Drive at steady speeds.
• Anticipate stops; slowing down may
eliminate the need to stop.
DRIVING THROUGH WATER
Note: Driving through deep water above
the recommended levels can cause vehicle
damage.
157
Fiesta (CCT)
Driving Hints
•
•
•
•
•
•
Combine errands and minimize
stop-and-go driving.
• When running errands, go to the
furthest destination first and then
work your way back home.
Close the windows for high-speed
driving.
Drive at reasonable speeds. (Traveling
at 65 mph/105 kph uses about 15%
less fuel than traveling at 75 mph/121
kph).
Keep the tires properly inflated and use
only the recommended size.
Use the recommended engine oil.
Perform all regularly scheduled
maintenance.
FLOOR MATS
E142666
WARNINGS
Always use floor mats that are
designed to fit the foot well of your
vehicle. Only use floor mats that
leave the pedal area unobstructed. Only
use floor mats that are firmly secured to
retention posts so that they cannot slip out
of position and interfere with the pedals
or impair safe operation of your vehicle in
other ways.
There are also some things you may want
to avoid doing because they reduce your
fuel economy:
• Avoid sudden or hard accelerations.
• Avoid revving the engine before turning
off the car.
• Avoid long idle periods.
• Do not warm up your vehicle on cold
mornings.
• Reduce the use of air conditioning and
heat.
• Avoid using speed control in hilly
terrain.
• Do not rest your foot on the brake
pedal while driving.
• Avoid carrying unnecessary weight
(approximately 1 mpg [0.4
kilometers/liter] is lost for every 400
lbs [180 kilograms] of weight carried).
• Avoid adding particular accessories to
your vehicle (e.g. bug deflectors,
rollbars/light bars, running boards, ski
racks).
• Avoid driving with the wheels out of
alignment.
Pedals that cannot move freely can
cause loss of vehicle control and
increase the risk of serious personal
injury.
Always make sure that the floor
mats are properly attached to the
retention posts in the carpet that are
supplied with your vehicle. Floor mats must
be properly secured to both retention posts
to ensure mats do not shift out of position.
Never place floor mats or any other
covering in the vehicle foot well that
cannot be properly secured to
prevent them from moving and interfering
with the pedals or the ability to control the
vehicle.
158
Fiesta (CCT)
Driving Hints
WARNINGS
Never place floor mats or any other
covering on top of already installed
floor mats. Floor mats should always
rest on top of vehicle carpeting surface and
not another floor mat or other covering.
Additional floor mats or any other covering
will reduce the pedal clearance and
potentially interfere with pedal operation.
Check attachment of floor mats on
a regular basis. Always properly
reinstall and secure floor mats that
have been removed for cleaning or
replacement.
Always make sure that objects
cannot fall into the driver foot well
while the vehicle is moving. Objects
that are loose can become trapped under
the pedals causing a loss of vehicle control.
Failure to properly follow floor mat
installation or attachment
instructions can potentially cause
interference with pedal operation causing
loss of control of vehicle.
To install floor mats, position the
floor mat so that the eyelet is over
the retention post and press down
to lock in.
To remove the floor mat, reverse the
installation procedure.
159
Fiesta (CCT)
Customer Assistance
These are some of the items that can be
found online:
• U.S. dealer locator by Dealer Name,
City/State, or Zip Code
• Owner Manuals
• Maintenance Schedules
• Recalls
• Ford Extended Service Plans
• Ford Genuine Accessories
• Service specials and promotions.
GETTING THE SERVICES YOU
NEED
Warranty repairs to your vehicle must be
performed by an authorized dealer. While
any authorized dealer handling your vehicle
line will provide warranty service, we
recommend you return to your selling
authorized dealer who wants to ensure
your continued satisfaction.
Please note that certain warranty repairs
require special training and equipment, so
not all authorized dealers are authorized
to perform all warranty repairs. This means
that, depending on the warranty repair
needed, you may have to take your vehicle
to another authorized dealer.
In Canada:
Mailing address
Customer Relationship Centre
Ford Motor Company of Canada, Limited
P.O. Box 2000
Oakville, Ontario L6K 0C8
A reasonable time must be allowed to
perform a repair after taking your vehicle
to the authorized dealer. Repairs will be
made using Ford or Motorcraft® parts, or
remanufactured or other parts that are
authorized by Ford.
Telephone
1-800-565-3673 (FORD)
Online
www.ford.ca
Away From Home
Additional Assistance
If you are away from home when your
vehicle needs service, contact the Ford
Customer Relationship Center or use the
online resources listed below to find the
nearest authorized dealer.
If you have questions or concerns, or are
unsatisfied with the service you are
receiving, follow these steps:
1.
Contact your Sales Representative or
Service Advisor at your selling/servicing
authorized dealer.
2. If your inquiry or concern remains
unresolved, contact the Sales Manager,
Service Manager or Customer Relations
Manager.
3. If you require assistance or clarification
on Ford Motor Company policies,
please contact the Ford Customer
Relationship Center.
In the United States:
Mailing address
Ford Motor Company
Customer Relationship Center
P.O. Box 6248
Dearborn, MI 48121
Telephone
1-800-392-3673 (FORD)
(TDD for the hearing impaired:
1-800-232-5952)
Online
Additional information and resources are
available online at www.fordowner.com
160
Fiesta (CCT)
Customer Assistance
In order to help you serve you better,
please have the following information
available when contacting a Customer
Relationship Center:
• Vehicle Identification Number.
• Your telephone number (home and
business).
• The name of the authorized dealer and
city where located.
• The vehicle’s current odometer reading.
California Civil Code Section 1793.22(b)
presumes that the manufacturer has had
a reasonable number of attempts to
conform the vehicle to its applicable
express warranties if, within the first 18
months of ownership of a new vehicle or
the first 18000 miles (29 000 km),
whichever occurs first:
1.
Two or more repair attempts are made
on the same non-conformity likely to
cause death or serious bodily injury OR
2. Four or more repair attempts are made
on the same nonconformity (a defect
or condition that substantially impairs
the use, value or safety of the vehicle)
OR
3. The vehicle is out of service for repair
of nonconformities for a total of more
than 30 calendar days (not necessarily
all at one time).
In some states, you must directly notify
Ford in writing before pursuing remedies
under your state’s warranty laws. Ford is
also allowed a final repair attempt in some
states.
In the United States, a warranty dispute
must be submitted to the BBB AUTO LINE
before taking action under the
Magnuson-Moss Warranty Act, or to the
extent allowed by state law, before
pursuing replacement or repurchase
remedies provided by certain state laws.
This dispute handling procedure is not
required prior to enforcing state created
rights or other rights which are independent
of the Magnuson-Moss Warranty Act or
state replacement or repurchase laws.
In the case of 1 or 2 above, the consumer
must also notify the manufacturer of the
need for the repair of the nonconformity
at the following address:
Ford Motor Company
16800 Executive Plaza Drive
Mail Drop 3NE-B
Dearborn, MI 48126
You are required to submit your warranty
dispute to BBB AUTO LINE before asserting
in court any rights or remedies conferred
by California Civil Code Section 1793.22(b).
You are also required to use BBB AUTO
LINE before exercising rights or seeking
remedies created by the Federal
Magnuson-Moss Warranty Act, 15 U.S.C.
sec. 2301 et seq. If you choose to seek
redress by pursuing rights and remedies
not created by California Civil Code Section
1793.22(b) or the Magnuson-Moss
Warranty Act, resort to BBB AUTO LINE is
not required by those statutes.
IN CALIFORNIA (U.S. ONLY)
California Civil Code Section 1793.2(d)
requires that, if a manufacturer or its
representative is unable to repair a motor
vehicle to conform to the vehicle’s
applicable express warranty after a
reasonable number of attempts, the
manufacturer shall be required to either
replace the vehicle with one substantially
identical or repurchase the vehicle and
reimburse the buyer in an amount equal to
the actual price paid or payable by the
consumer (less a reasonable allowance
for consumer use). The consumer has the
right to choose whether to receive a refund
or replacement vehicle.
161
Fiesta (CCT)
Customer Assistance
already taken to try to resolve them. A
Customer Claim Form will be mailed that
will need to be completed, signed and
returned to the BBB along with proof of
ownership. Upon receipt, the BBB will
review the claim for eligibility under the
Program Summary Guidelines.
THE BETTER BUSINESS
BUREAU (BBB) AUTO LINE
PROGRAM (U.S. ONLY)
Your satisfaction is important to Ford
Motor Company and to your dealer. If a
warranty concern has not been resolved
using the three-step procedure outlined
earlier in this chapter in the Getting the
Services you need section, you may be
eligible to participate in the BBB AUTO
LINE program.
You can get more information by
calling BBB AUTO LINE at
1-800-955-5100, or writing to:
BBB AUTO LINE
4200 Wilson Boulevard, Suite 800
Arlington, Virginia 22203-1833
The BBB AUTO LINE program consists of
two parts – mediation and arbitration.
During mediation, a representative of the
BBB will contact both you and Ford Motor
Company to explore options for settlement
of the claim. If an agreement is not reached
during mediation or you do not want to
participate in mediation, and if your claim
is eligible, you may participate in the
arbitration process. An arbitration hearing
will be scheduled so that you can present
your case in an informal setting before an
impartial person. The arbitrator will
consider the testimony provided and make
a decision after the hearing.
BBB AUTO LINE applications can also be
requested by calling the Ford Motor
Company Customer Relationship Center
at 1-800-392-3673.
Note: Ford Motor Company reserves the
right to change eligibility limitations, modify
procedures, or to discontinue this process
at any time without notice and without
obligation.
UTILIZING THE
MEDIATION/ARBITRATION
PROGRAM (CANADA ONLY)
Disputes submitted to the BBB AUTO LINE
program are usually decided within forty
days after you file your claim with the BBB.
You are not bound by the decision, and
may reject the decision and proceed to
court where all findings of the BBB Auto
Line dispute, and decision, are admissible
in the court action. Should you choose to
accept the BBB AUTO LINE decision, Ford
is then bound by the decision, and must
comply with the decision within 30 days
of receipt of your acceptance letter.
For vehicles delivered to authorized
Canadian dealers. In those cases where
you continue to feel that the efforts by Ford
of Canada and the authorized dealer to
resolve a factory-related vehicle service
concern have been unsatisfactory, Ford of
Canada participates in an impartial third
party mediation/arbitration program
administered by the Canadian Motor
Vehicle Arbitration Plan (CAMVAP).
The CAMVAP program is a straight forward
and relatively speedy alternative to resolve
a disagreement when all other efforts to
produce a settlement have failed. This
procedure is without cost to you and is
designed to eliminate the need for lengthy
and expensive legal proceedings.
BBB AUTO LINE Application: Using the
information provided below, please call or
write to request a program application.
You will be asked for your name and
address, general information about your
new vehicle, information about your
warranty concerns, and any steps you have
162
Fiesta (CCT)
Customer Assistance
In the CAMVAP program, impartial
third-party arbitrators conduct hearings at
mutually convenient times and places in
an informal environment. These impartial
arbitrators review the positions of the
parties, make decisions and, when
appropriate, render awards to resolve
disputes. CAMVAP decisions are fast, fair,
and final as the arbitrator’s award is
binding on both you and Ford of Canada.
If your vehicle must be serviced while you
are traveling or living in Asia-Pacific Region,
Sub-Saharan Africa, U.S. Virgin Islands,
Central America, the Caribbean, and Israel,
contact the nearest authorized dealer. If
the authorized dealer cannot help you,
contact:
FORD MOTOR COMPANY
FORD EXPORT OPERATIONS & GLOBAL
INITIATIVES
Customer Relationship Center
1555 Fairlane Drive
Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A.
Telephone: (313) 594-4857
Fax: (313) 390-0804
Email: [email protected]
CAMVAP services are available in all
Canadian territories and provinces. For
more information, without charge or
obligation, call your CAMVAP Provincial
Administrator directly at 1-800-207-0685
or visit www.camvap.ca.
GETTING ASSISTANCE
OUTSIDE THE U.S. AND
CANADA
For customers in Guam, the
Commonwealth of the Northern Mariana
Islands (CNMI), America Samoa, and the
U.S. Virgin Islands, please feel free to call
our Toll-Free Number: (800) 841-FORD
(3673).
Before exporting your vehicle to a foreign
country, contact the appropriate foreign
embassy or consulate. These officials can
inform you of local vehicle registration
regulations and where to find unleaded
fuel.
If your vehicle must be serviced while you
are traveling or living in Puerto Rico,
contact the nearest authorized dealer. If
the authorized dealer cannot help you,
contact:
If you cannot find unleaded fuel or can only
get fuel with an anti-knock index lower
than is recommended for your vehicle,
contact our Customer Relationship Center.
FORD MOTOR COMPANY
FORD EXPORT OPERATIONS & GLOBAL
INITIATIVES
Customer Relationship Center
1555 Fairlane Drive
Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A.
Telephone: (800) 841-FORD (3673)
FAX: (313) 390-0804
Email: [email protected]
www.ford.com.pr
The use of leaded fuel in your vehicle
without proper conversion may damage
the effectiveness of your emission control
system and may cause engine knocking or
serious engine damage. Ford Motor
Company or Ford of Canada is not
responsible for any damage caused by use
of improper fuel. Using leaded fuel may
also result in difficulty importing your
vehicle back into the United States.
If your vehicle must be serviced while you
are traveling or living in the Middle East,
contact the nearest authorized dealer. If
the authorized dealer cannot help you,
contact:
163
Fiesta (CCT)
Customer Assistance
Ford Middle East
Customer Relationship Center
P.O. Box 21470
Dubai, United Arab Emirates
Telephone: +971 4 3326084
Toll-Free Number for the Kingdom of Saudi
Arabia: 800 8971409
Local Telephone Number of Kuwait:
24810575
FAX: +971 4 3327299
Email: [email protected]
www.me.ford.com
Helm, Incorporated can also be reached
by their website:
www.helminc.com
(Items in this catalog may be purchased
by credit card, check or money order.)
Obtaining a French Owner’s
Manual
French Owner’s Manual can be obtained
from your authorized dealer or by
contacting Helm, Incorporated using the
contact information listed previously in this
section.
If you buy your vehicle in North America
and then relocate to any of the above
locations, register your vehicle
identification number (VIN) and new
address with Ford Motor Company Export
Operations & Global Growth Initiatives by
emailing [email protected].
REPORTING SAFETY DEFECTS
(U.S. ONLY)
If you are in another foreign country,
contact the nearest authorized dealer. In
the event your inquiry is unresolved,
communicate your concern with the
dealership’s Sales Manager, Service
Manager or Customer Relations Manager.
If you require additional assistance or
clarification, please contact the respective
Customer Relationship Center as
previously listed.
E142557
If you believe that your vehicle has
a defect which could cause a
crash or could cause injury or
death, you should immediately
inform the National Highway
Traffic Safety Administration
(NHTSA) in addition to notifying
Ford Motor Company.
Customers in the U.S. should call
1-800-392-3673.
ORDERING ADDITIONAL
OWNER'S LITERATURE
If NHTSA receives similar
complaints, it may open an
investigation, and if it finds that a
safety defect exists in a group of
vehicles, it may order a recall and
remedy campaign. However,
NHTSA cannot become involved
in individual problems between
you, your dealer, or Ford Motor
Company.
To order the publications in this portfolio,
contact Helm, Incorporated at:
HELM, INCORPORATED
47911 Halyard Drive
Plymouth, Michigan 48170
Attention: Customer Service
Or to order a free publication catalog, call
toll free: 1-800-782-4356
Monday-Friday 8:00 a.m. - 6:00 p.m. EST
164
Fiesta (CCT)
Customer Assistance
To contact NHTSA, you may call
the Vehicle Safety Hotline
toll-free at 1-888-327-4236 (TTY:
1-800-424-9153); go to
http://www.safercar.gov; or write
to:
You can also obtain other
information about motor vehicle
safety from
http://www.safercar.gov.
REPORTING SAFETY DEFECTS
(CANADA ONLY)
Administrator
1200 New Jersey Avenue,
Southeast
If you believe that your vehicle has a defect
which could cause a crash or could cause
injury or death, you should immediately
inform Transport Canada.
Washington, D.C. 20590
Transport Canada Contact Information
Website
https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/PCDB-BDPP/Index.aspx
Phone
1–800–333–0510
165
Fiesta (CCT)
Roadside Emergencies
Trailers shall be covered up to $200 if the
disabled eligible vehicle requires service at
the nearest authorized dealer. If the trailer
is disabled, but the towing vehicle is
operational, the trailer does not qualify for
any roadside services.
ROADSIDE ASSISTANCE
Vehicles Sold In The U.S.: Getting
Roadside Assistance
To fully assist you should you have a
vehicle concern, Ford Motor Company
offers a complimentary roadside
assistance program. This program is
separate from the New Vehicle Limited
Warranty. The service is available:
•
•
Vehicles Sold In The U.S. : Using
Roadside Assistance
Complete the roadside assistance
identification card and place it in your
wallet for quick reference. This card is
found in the owner's information portfolio
in the glove compartment.
24 hours, seven days a week.
for the coverage period listed on the
Roadside Assistance Card included in
your Owner's Manual portfolio.
U.S. Ford vehicle customers who require
Roadside Assistance, call 1-800-241-3673.
Roadside assistance will cover:
• a flat tire change with a good spare, if
provided with the vehicle (except
vehicles that have been supplied with
a tire inflation kit).
• battery jump start.
• lock-out assistance (key replacement
cost is the customer's responsibility).
• fuel delivery — Independent Service
Contractors, if not prohibited by state,
local or municipal law, shall deliver up
to 2.0 gallons (7.5 liters) of gasoline or
5.0 gallons (18.9 liters) of diesel fuel
to a disabled vehicle. Fuel delivery
service is limited to two no-charge
occurrences within a 12-month period.
• winch out — available within 100 feet
(30.5 meters) of a paved or county
maintained road, no recoveries.
• towing — Ford and Lincoln eligible
vehicles towed to an authorized dealer
within 35 miles (56.3 kilometers) of the
disablement location or to the nearest
authorized dealer. If a member
requests to be towed to an authorized
dealer more than 35 miles (56.3
kilometers) from the disablement
location, the member shall be
responsible for any mileage costs in
excess of 35 miles (56.3 kilometers).
If you need to arrange roadside assistance
for yourself, Ford Motor Company will
reimburse a reasonable amount for towing
to the nearest dealership within 35 miles
(56.3 kilometers). To obtain
reimbursement information, U.S. Ford
vehicle customers call 1-800-241-3673.
Customers will be asked to submit their
original receipts.
Vehicles Sold In Canada : Getting
Roadside Assistance
Canadian customers who require roadside
assistance, call 1-800-665-2006.
Vehicles Sold In Canada : Using
Roadside Assistance
Complete the roadside assistance
identification card and place it in your
wallet for quick reference. In Canada, the
card is found in the warranty information
in the glove box.
Canadian roadside coverage and benefits
may differ from the U.S. coverage. Please
refer to your warranty information or visit
our website at www.ford.ca for information
on Canadian services and benefits.
166
Fiesta (CCT)
Roadside Emergencies
3. Turn the ignition off.
4. Turn the ignition on again to re-enable
the fuel pump.
Canadian customers who need to obtain
roadside information, call
1-800-665-2006 or visit our website at
www.ford.ca.
For vehicles equipped with a push button
start system:
HAZARD WARNING FLASHERS
1.
Press the START/STOP button to
turn the ignition off.
2. Press the brake pedal and press the
START/STOP button (crank
attempt).
3. Remove your foot from the brake pedal
and press the START/STOP button
(ignition off).
4. Press the START/STOP button again
to re-enable the fuel system.
Note: If used when the vehicle is not
running, the battery will lose charge. There
may be insufficient power to restart your
vehicle.
The hazard warning button is
located on the instrument panel.
Use it when your vehicle is
creating a safety hazard for other
motorists.
•
•
Press the button to turn on the hazard
warning function, and the front and
rear direction indicators will flash.
Press the button again to turn them
off.
JUMP-STARTING THE VEHICLE
WARNINGS
Do not use fuel lines, engine rocker
covers or the intake manifold as
grounding points.
FUEL SHUTOFF
Connect batteries with only the same
nominal voltage.
WARNING
Failure to inspect and, if necessary,
repair fuel leaks after a collision may
increase the risk of fire and serious
injury. Ford Motor Company recommends
that the fuel system be inspected by an
authorized dealer after any collision.
Always use booster cables with
insulated clamps and adequate size
cable.
Note: Do not disconnect the battery from
your vehicle’s electrical system.
In the event of a moderate to severe
collision, this vehicle is equipped with a
fuel pump shut-off feature that stops the
flow of fuel to the engine. Not every impact
will cause a shut-off.
Should your vehicle shut off after a
collision, you may restart your vehicle by
doing the following:
1. Turn the ignition off.
2. Turn the ignition to crank.
167
Fiesta (CCT)
Roadside Emergencies
To Connect the Booster Cables
A
C
D
E102923
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
B
WARNINGS
Do not connect directly to the
negative (–) terminal of the battery
with low charge.
E102925
A
Vehicle with low charge battery
B
Booster battery vehicle
C
Positive connection cable
D
Negative connection cable
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
To Start the Engine
1.
Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
1.
Position the vehicles so that they do
not touch one another.
2. Switch off the engine and any electrical
equipment.
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
WARNING
Do not switch on the headlamps
when disconnecting the cables. The
peak voltage could blow the bulbs.
Disconnect the cables in the reverse order.
168
Fiesta (CCT)
Fuses
FUSE SPECIFICATION CHART
Engine Compartment Fuse Box
E78332
4-door and 5-door
E156752
169
Fiesta (CCT)
Fuses
Fuse
Fuse rating
Circuits protected
1
60 A
Electronic stability program module
1
40 A
Anti-lock braking system
2
40 A
Transmission control unit
3
40 A
Engine cooling fan
3
60 A
Engine cooling fan module
4
40 A
Heater blower
5
60 A
Passenger compartment fuse box supply (battery)
6
30 A
Locking and unlocking
7
60 A
Ignition switch
8
60 A
Powertrain control module
9
40 A
Electronic stability program module
10
30 A
Engine start inhibitor
11
30 A
Fuel system
12
60 A
Power windows
13
60 A
High speed cooling fan
14
-
Not used
15
-
Not used
16
-
Not used
17
20 A
High beam
18
15 A
Powertrain control module
19
20 A
Fog lamps
20
15 A
Emissions system
21
7.5 A
Fog lamps, high beam
22
15 A
Ignition coil
22
20 A
Ignition coil
23
15 A
Exterior lamps right-hand side
170
Fiesta (CCT)
Fuses
Fuse
Fuse rating
Circuits protected
24
10 A
Emissions system
25
15 A
Exterior lamps left-hand side
26
20 A
Horn, battery back-up sounder, interior lamps
27
7.5 A
Engine cold start system module
27
15 A
Water pump, active grill shutter
28
15 A
Direction indicators
29
20 A
Compressed natural gas, fuel control module
30
10 A
Air conditioning clutch
31
-
32
7.5 A
Powertrain control module, transmission control unit
33
10 A
Fuel injectors
Not used
33
7.5 A
Mass air flow sensor
34
30 A
Heated exterior mirrors
35
10 A
Fog lamp left-hand side
36
10 A
Fog lamp right-hand side
37
10 A
High beam left-hand side
38
10 A
High beam right-hand side
39
-
Not used
40
-
Not used
41
-
Not used
42
-
Not used
43
-
Not used
44
-
Not used
45
-
Not used
46
-
Not used
171
Fiesta (CCT)
Fuses
Relay
Circuits switched
R1
Compressed natural gas fuel system
R2
Not used
R3
Powertrain control module
R4
Heater blower
R5
Engine cooling fan
R6
Air conditioning clutch
R7
High speed engine cooling fan
R8
Not used
R9
Engine start inhibitor
R10
High beam
R11
Fog lamps
R12
Reversing lamp
R13
Fuel pump
Passenger Compartment Fuse Box
This fuse box is located behind the glove
box. Open the glove box and empty the
contents. Press the sides inwards and
swivel the glove box downward.
172
Fiesta (CCT)
Fuses
E156756
Fuse
Fuse rating
1
15 A
Ignition switch
2
7.5 A
Interior mirror, autowipers, heater relay control
3
7.5 A
Instrument cluster
7.5 A
Passenger airbag deactivation indicator, passenger sensing
system
15 A
On-board diagnostics connector
4
5
Circuits protected
173
Fiesta (CCT)
Fuses
Fuse
Fuse rating
Circuits protected
6
10 A
Reversing lamps
7
7.5 A
Instrument panel, information and entertainment display
8
7.5 A
Moonroof
9
20 A
Keyless entry, keyless starting
10
15 A
Audio unit, SYNC
11
20 A
Windshield wipers
12
7.5 A
Climate control
13
15 A
Rear window wiper
14
20 A
Keyless entry, keyless starting
15
15 A
Wiper switch
16
5A
Electric exterior mirrors, power windows
17
15 A
Heated seats
18
10 A
Brake lamp
19
7.5 A
Instrument cluster
20
10 A
Airbags
7.5 A
Electronic power assisted steering, instrument cluster,
ignition, wipers, passive anti-theft system
7.5 A
Transmission control unit, powertrain control module,
anti-lock braking system, electronic stability program
21
22
23
7.5 A
Transmission control unit
24
7.5 A
Audio unit
25
7.5 A
Electric exterior mirrors
26
7.5 A
Locking and unlocking
27
-
Not used
28
-
Not used
29
-
Not used
30
-
Not used
31
30 A
Power windows
174
Fiesta (CCT)
Fuses
Fuse
Fuse rating
Circuits protected
32
20 A
Battery back-up sounder
33
20 A
Auxilliary power points
34
30 A
Power windows
35
20 A
Moonroof
36
-
Not used
Relay
Circuits switched
R1
Ignition relay
R2
Not used
R3
Not used
R4
Driver heated seat
R5
Passenger heated seat
R6
Keyless starting
R7
Keyless starting
R8
Battery back-up sounder
R9
Accessory delay
CHANGING A FUSE
Fuses
E142430
WARNING
If electrical components in the vehicle are
not working, a fuse may have blown. Blown
fuses are identified by a broken wire within
the fuse. Check the appropriate fuses
before replacing any electrical
components.
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
175
Fiesta (CCT)
Fuses
Standard Fuse Amperage Rating and Color
Color
Fuse rating
Micro fuses
Dual micro fuses
M-type fuses
J-type fuses
5A
Tan
Tan
-
-
7.5A
Brown
Brown
-
-
10A
Red
Red
-
-
15A
Blue
Blue
Grey
-
20A
Yellow
-
Light Blue
Blue
25A
White
-
White
White
30A
Green
-
Pink
Pink
40A
-
-
Green
Green
50A
-
-
-
Red
60A
-
-
-
Yellow
176
Fiesta (CCT)
Maintenance
Working with the Engine Off
GENERAL INFORMATION
Set the parking brake and shift to P
(Park).
2. Turn off the engine and remove the key
(if equipped).
3. Block the wheels.
1.
Have your vehicle serviced regularly to help
maintain its roadworthiness and resale
value. There is a large network of Ford
authorized dealers that are there to help
you with their professional servicing
expertise. We believe that their specially
trained technicians are best qualified to
service your vehicle properly and expertly.
They are supported by a wide range of
highly specialized tools developed
specifically for servicing your vehicle.
Working with the Engine On
WARNING
To reduce the risk of vehicle damage
and/or personal burn injuries, do not
start your engine with the air cleaner
removed and do not remove it while the
engine is running.
To help you service your vehicle, we
provide scheduled maintenance
information which makes tracking routine
service easy. See Scheduled
Maintenance (page 368).
1.
Set the parking brake and shift to P
(Park).
2. Block the wheels
If your vehicle requires professional service,
your authorized dealer can provide the
necessary parts and service. Check your
warranty information to find out which
parts and services are covered.
OPENING AND CLOSING THE
HOOD
Use only recommended fuels, lubricants,
fluids and service parts conforming to
specifications. Motorcraft® parts are
designed and built to provide the best
performance in your vehicle.
Opening the Hood
Precautions
•
•
•
•
Do not work on a hot engine.
Make sure that nothing gets caught in
moving parts.
Do not work on a vehicle with the
engine running in an enclosed space,
unless you are sure you have enough
ventilation.
Keep all open flames and other burning
material (such as cigarettes) away
from the battery and all fuel related
parts.
E102165
1.
177
Fiesta (CCT)
Pull the hood release handle.
Maintenance
E163236
2. Move the catch to the left.
E87786
3. Open the hood and support it with the
hood strut.
Closing the Hood
1.
Remove the hood strut from the catch
and secure correctly after use.
2. Lower the hood and allow it to drop
from under its own weight for the last
8 - 11 inches (20 – 30 centimeters).
Note: Make sure that you have closed the
hood correctly.
178
Fiesta (CCT)
Maintenance
UNDER HOOD OVERVIEW - 1.0L ECOBOOST
B
A
E163005
*
H
D
C
G
F
E
*
A
Engine coolant reservoir : See Engine Coolant Check (page 183).
B
Engine oil filler cap : See Engine Oil Check (page 182).
C
Battery: See Changing the 12V Battery (page 186).
D
Brake and clutch fluid reservoir : See Brake Fluid Check (page 185).
*
*
E
Engine compartment fuse box: See Fuses (page 169).
F
Windshield and rear window washer fluid reservoir: See Washer Fluid Check
(page 186).
G
Air cleaner: See Changing the Engine Air Filter (page 187).
H
Engine oil dipstick : See Engine Oil Check (page 182).
*
The filler caps and the engine oil dipstick are colored for easy identification.
179
Fiesta (CCT)
Maintenance
UNDER HOOD OVERVIEW - 1.6L DURATEC-16V TI-VCT (SIGMA)
H
E163006
*
C
B
A
G
D
F
E
*
A
Engine coolant reservoir : See Engine Coolant Check (page 183).
B
Engine oil filler cap : See Engine Oil Check (page 182).
C
Battery: See Changing the Engine Air Filter (page 187).
D
Brake and clutch fluid reservoir : See Brake Fluid Check (page 185).
*
E
Engine compartment fuse box: See Fuses (page 169).
F
Windshield and rear window washer fluid reservoir: See Washer Fluid Check
(page 186).
G
Air cleaner: See Changing the Engine Air Filter (page 187).
H
Engine oil dipstick : See Engine Oil Check (page 182).
*
The filler caps and the engine oil dipstick are colored for easy identification.
180
Fiesta (CCT)
Maintenance
UNDER HOOD OVERVIEW - 1.6L ECOBOOST™
A
B
C
D
H
E
G
F
E163007
*
*
A
Engine coolant reservoir : See Engine Coolant Check (page 183).
B
Engine oil filler cap : See Engine Coolant Check (page 183).
*
*
C
Engine oil dipstick : See Engine Coolant Check (page 183).
D
Battery: See Changing the 12V Battery (page 186).
E
Brake and clutch fluid reservoir : See Brake Fluid Check (page 185).
*
F
Engine compartment fuse box: See Fuses (page 169).
G
Windshield and rear window washer fluid reservoir: See Washer Fluid Check
(page 186).
H
Air cleaner: See Changing the Engine Air Filter (page 187).
The filler caps and the engine oil dipstick are colored for easy identification.
181
Fiesta (CCT)
Maintenance
ENGINE OIL DIPSTICK - 1.0L
ECOBOOST
ENGINE OIL DIPSTICK - 1.6L
ECOBOOST™
B
A
A
B
E141337
A
Minimum
B
Maximum
E134114
ENGINE OIL DIPSTICK - 1.6L
DURATEC-16V TI-VCT (SIGMA)
A
Minimum
B
Maximum
ENGINE OIL CHECK
A
B
Note: Check the level before starting the
engine.
Note: Make sure that the level is between
the MIN and the MAX marks.
1.
Make sure that your vehicle is on level
ground.
2. Turn the engine off and wait 10 minutes
for the oil to drain into the oil pan.
3. Remove the dipstick and wipe it with
a clean, lint-free cloth. Replace the
dipstick and remove it again to check
the oil level.
E95540
A
Minimum
B
Maximum
If the level is at the MIN mark, add oil
immediately.
Adding Engine Oil
Note: Do not remove the filler cap when
the engine is running.
Note: Do not add oil further than the MAX
mark. Oil levels above the MAX mark may
cause engine damage.
182
Fiesta (CCT)
Maintenance
4. After three seconds, the Service: Oil
reset in prog. message will be
displayed.
5. After 25 seconds, the Service: Oil reset
complete message will be displayed.
6. Release both the accelerator and brake
pedals.
7. The Service: Oil reset complete
message will no longer be displayed.
8. Rotate the key to the off position. For
vehicles with push-button start, press
the start button to turn the vehicle off
completely.
E142732
Only use oils certified for gasoline engines
by the American Petroleum Institute (API).
An oil with this trademark symbol
conforms to the current engine and
emission system protection standards and
fuel economy requirements of the
International Lubricants Specification
Advisory Council (ILSAC), comprised of
U.S. and Japanese automobile
manufacturers.
ENGINE COOLANT CHECK
Checking the Engine Coolant
When the engine is cold, check the
concentration and level of the engine
coolant at the intervals listed in the
scheduled maintenance information. See
Scheduled Maintenance (page 368).
1. Remove the filler cap.
2. Add engine oil that meets the Ford
specifications. See Maintenance
(page 177).
3. Replace the filler cap. Turn it until you
feel a strong resistance.
Note: Make sure that the level is between
the MIN and MAX marks on the coolant
reservoir.
Note: Coolant expands when it is hot. The
level may extend beyond the MAX mark
Resetting the Oil Life Monitoring
System
Note: If the level is at the MIN mark, below
the MIN mark, or empty, add coolant
immediately. See Adding Engine Coolant
in this chapter.
Note: Reset the oil life monitoring only after
an oil change.
The coolant concentration should be
maintained within 48% to 50%, which
equates to a freeze point between -30°F
(-34°C) and -34°F (-37°C).
1.
Turn the ignition key to the on position.
Do not start the engine. For vehicles
with push-button start, press and hold
the start button for two seconds
without pressing the brake pedal. Do
not attempt to start the engine.
2. Press both the accelerator and brake
pedals at the same time.
3. Keep both pedals fully pressed.
Note: For best results, coolant
concentration should be tested with a
refractometer such as Rotunda tool
300-ROB75240 available from your
authorized dealer. Ford does not
recommend the use of hydrometers or
coolant test strips for measuring coolant
concentrations.
183
Fiesta (CCT)
Maintenance
Note: Automotive fluids are not
interchangeable. Do not use engine coolant
or antifreeze or windshield washer fluid
outside of its specified function and vehicle
location.
•
Adding Engine Coolant
WARNINGS
Do not add engine coolant when the
engine is hot. Steam and scalding
liquids released from a hot cooling
system can burn you badly. Also, you can
be burned if you spill coolant on hot engine
parts.
•
Do not put engine coolant in the
windshield washer fluid container. If
sprayed on the windshield, engine
coolant could make it difficult to see
through the windshield.
To reduce the risk of personal injury,
make sure the engine is cool before
unscrewing the coolant pressure
relief cap. The cooling system is under
pressure; steam and hot liquid can come
out forcefully when the cap is loosened
slightly.
•
Do not add coolant further than the
MAX mark.
•
Note: Do not use stop leak pellets, cooling
system sealants, or additives as they can
cause damage to the engine cooling or
heating systems. This damage would not
be covered under your vehicle’s warranty.
Unscrew the cap slowly. Any pressure will
escape as you unscrew the cap.
Add prediluted engine coolant meeting the
Ford specification. See Maintenance
(page 177).
Note: During normal vehicle operation, the
engine coolant may change color from
orange to pink or light red. As long as the
engine coolant is clear and uncontaminated,
this color change does not indicate the
engine coolant has degraded nor does it
require the engine coolant to be drained, the
system to be flushed, or the engine coolant
to be replaced.
Whenever coolant has been added, the
coolant level in the coolant reservoir
should be checked the next few times you
drive the vehicle. If necessary, add enough
prediluted engine coolant to bring the
coolant level to the proper level.
184
Fiesta (CCT)
Do not mix different colors or types of
coolant in your vehicle. Make sure the
correct coolant is used. Mixing of
engine coolants may harm your
engine’s cooling system. The use of an
improper coolant may harm engine and
cooling system components and may
void the warranty. Use prediluted
engine coolant meeting the Ford
specification. See Maintenance (page
177).
In case of emergency, a large amount
of water without engine coolant may
be added in order to reach a vehicle
service location. In this instance, the
cooling system must be drained,
chemically cleaned with Motorcraft®
Premium Cooling System Flush, and
refilled with engine coolant as soon as
possible. Water alone (without engine
coolant) can cause engine damage
from corrosion, overheating or freezing.
Do not use alcohol, methanol, brine or
any engine coolants mixed with alcohol
or methanol antifreeze (coolant).
Alcohol and other liquids can cause
engine damage from overheating or
freezing.
Do not add extra inhibitors or additives
to the coolant. These can be harmful
and compromise the corrosion
protection of the engine coolant.
Maintenance
Recycled Engine Coolant
AUTOMATIC TRANSMISSION
FLUID CHECK
Ford Motor Company does not recommend
the use of recycled engine coolant since a
Ford-approved recycling process is not yet
available.
Note: Transmission fluid should be checked
by an authorized dealer. If required, fluid
should be added by an authorized dealer.
Used engine coolant should be disposed
of in an appropriate manner. Follow your
community’s regulations and standards
for recycling and disposing of automotive
fluids.
The automatic transmission does not have
a transmission fluid dipstick.
Have an authorized dealer check and
change the transmission fluid and filter at
the correct service interval. See
Scheduled Maintenance (page 368). Your
transmission does not consume fluid.
However, the fluid level should be checked
if the transmission is not working properly,
(i.e., if the transmission slips or shifts
slowly) or if you notice some sign of fluid
leakage.
Severe Climates
If you drive in extremely cold climates:
• It may be necessary to have a Ford
authorized dealer increase the coolant
concentration above 50%.
• A coolant concentration of 60% will
provide improved freeze point
protection. Engine coolant
concentrations above 60% will
decrease the overheat protection
characteristics of the engine coolant
and may cause engine damage
Do not use supplemental transmission
fluid additives, treatments or cleaning
agents. The use of these materials may
affect transmission operation and result
in damage to internal transmission
components.
If you drive in extremely hot climates:
• It may be necessary to have a Ford
authorized dealer decrease the coolant
concentration to 40%.
• A coolant concentration of 40% will
provide improved overheat protection.
Engine coolant concentrations below
40% will decrease the corrosion/freeze
protection characteristics of the engine
coolant and may cause engine
damage.
BRAKE FLUID CHECK
Fluid levels between the MIN and MAX
lines are within the normal operating range;
there is no need to add fluid. If the fluid
levels are outside of the normal operating
range, the performance of the system
could be compromised; seek service from
your authorized dealer immediately.
Vehicles driven year-round in non-extreme
climates should use prediluted engine
coolant for optimum cooling system and
engine protection.
POWER STEERING FLUID
CHECK
Your vehicle is equipped with an electric
power steering (EPS) system. There is no
fluid reservoir to check or fill.
185
Fiesta (CCT)
Maintenance
CHECKING THE WIPER
BLADES
FUEL FILTER
Your vehicle is equipped with a lifetime
fuel filter that is integrated with the fuel
tank. Regular maintenance or replacement
is not needed.
WASHER FLUID CHECK
Note: The reservoir supplies the front and
rear washer systems.
E142463
When adding fluid, use a mixture of washer
fluid and water to help prevent freezing in
cold weather and improve the cleaning
capability. We recommend that you use
only high quality washer fluid.
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
For information on fluid dilution, refer to
the product instructions.
CHANGING THE WIPER
BLADES
CHANGING THE 12V BATTERY
Windshield Wiper Blades
WARNING
For vehicles with start-stop the
battery requirement is different. You
must replace the battery with one of
exactly the same specification.
Changing the Windshield Wiper Blades
2
Note: Where applicable you must
reprogram the audio system using the
keycode.
1
The battery is located in the engine
compartment. See Maintenance (page
177).
E72899
1. Press the locking button.
2. Remove the wiper blade.
3. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
Rear Window Wiper Blade
1.
186
Fiesta (CCT)
Lift the wiper arm.
Maintenance
Change the air filter element at the correct
interval. See Scheduled Maintenance
(page 368).
Note: Failure to use the correct air filter
element may result in severe engine
damage. Your warranty may be void for any
damage to the engine if the correct air filter
element is not used.
3
Vehicles with 1.0L EcoBoost and 1.6L
EcoBoost Engine
E130060
2
2. Slightly rotate the wiper blade from the
wiper arm
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
5. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
E156923
CHANGING THE ENGINE AIR
FILTER
Vehicles with 1.6L Duratec-16V Engine
WARNING
To reduce the risk of vehicle damage
and personal burn injuries, do not
start your engine with the air cleaner
removed and do not remove it while the
engine is running.
When changing the air filter element, use
only the air filter element listed. See
Technical Specifications (page 200).
On vehicles with an EcoBoost engine, when
servicing the air cleaner it is important that
no foreign material enters the air induction
system. The engine and turbocharger are
susceptible to damage from even small
particles.
E156924
1.
Remove the retaining screws that
secure the air filter housing cover.
2. Carefully lift the air filter housing cover.
187
Fiesta (CCT)
Maintenance
Vertical Aim Adjustment Procedure
3. Remove the air filter element from the
air filter housing.
4. Wipe any dirt or debris from the air filter
housing and cover to make sure no dirt
gets in the engine and to make sure you
have a good seal.
5. Install a new air filter element. Be
careful not to crimp the filter element
edges between the air filter housing
and cover. This could cause filter
damage and allow unfiltered air to
enter the engine if not correctly seated.
6. Install the air filter housing cover.
7. Install the retaining screws to secure
the air filter housing cover to the air
filter housing.
1.
Park your vehicle directly in front of a
wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.
2. Measure the height of the headlamp
bulb center from the ground and mark
an 8 foot (2.4 meter) horizontal
reference line on the vertical wall or
screen at this height.
Note: To see a clearer light pattern for
adjusting, you may want to block the light
from one headlamp while adjusting the
other.
3. Turn on the low beam headlamps to
illuminate the wall or screen and open
the hood.
ADJUSTING THE HEADLAMPS
Vertical Aim Adjustment
If your vehicle has been involved in an
accident, have the alignment of your
headlamps checked by an authorized
dealer.
Headlamp Aiming Target
E142465
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the right hand
portion of the beam pattern. If the top
edge of the high intensity light zone is
not at the horizontal reference line,
adjust the headlamp.
E142592
A
8 feet (2.4 meters)
B
Center height of lamp to ground
C
25 feet (7.6 meters)
D
Horizontal reference line
188
Fiesta (CCT)
Maintenance
2
E146878
2. Remove the screws.
3
4
E156848
5. Locate the vertical adjuster on each
headlamp. Using a Phillips #2
screwdriver, turn the adjuster either
clockwise or counterclockwise in order
to adjust the vertical aim of the
headlamp. The horizontal edge of the
brighter light should touch the
horizontal reference line.
6. Close the hood and turn the lamps off.
E102590
Horizontal Aim Adjustment
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Horizontal aim is not required for this
vehicle and is not adjustable.
REMOVING A HEADLAMP
1.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.
Open the hood. See Opening and
Closing the Hood (page 177).
189
Fiesta (CCT)
Maintenance
CHANGING A BULB - VEHICLES
WITH: 4-DOOR
A
WARNINGS
Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Do not touch the glass of the bulb.
E161707
Note: Only fit bulbs of the correct
specification.
2. Remove the bulb holder.
3. Remove the bulb.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp Low Beam
1.
Headlamp
Remove the headlamp. See
Removing a Headlamp (page 189).
Note: Remove the covers to gain access to
the bulbs.
A
B
C
D
2
E159827
4
A
Side marker
B
Headlamp low beam
C
Headlamp high beam
D
Direction indicator
E146803
2. Remove the cover.
3. Disconnect the electrical connector.
4. Release the clip and remove the bulb.
Note: Do not touch the glass of the bulb.
Side Marker
1.
Remove the headlamp. See
Removing a Headlamp (page 189).
Headlamp High Beam
1.
190
Fiesta (CCT)
Remove the headlamp. See
Removing a Headlamp (page 189).
Maintenance
Side Direction Indicator
1
2
2
3
E146804
2. Remove the cover.
3. Turn the bulb counterclockwise and
remove it.
Note: Do not touch the glass of the bulb.
E112777
1.
Press the side of the cover to release
the clips.
2. Remove the cover.
Direction Indicator
1.
Remove the headlamp. See
Removing a Headlamp (page 189).
3
3
E112778
E146805
3. Remove the bulb and bulb holder.
Remove the bulb.
2. Turn the bulb holder counterclockwise
and remove it.
3. Gently press the bulb into the bulb
holder, turn it counterclockwise and
remove it.
191
Fiesta (CCT)
Maintenance
Front Fog Lamps
6
1
E161665
1.
Remove the retaining clips to gain
access to the lamp assembly.
5
E161670
5. Disconnect the electrical connector.
6. Turn the bulb holder counterclockwise
and remove it.
Rear Lamps
2
3
Brake, Tail and Direction Indicator
Lamps
4
1.
Remove the trim and disconnect the
electrical connector.
2. Loosen the wing nut and carefully pull
out the rear lamp.
E161667
Note: You cannot separate the fog lamp
bulb from the bulb holder.
2. Using a suitable implement, remove
the cover.
3. Remove the screws.
4. Remove the lamp.
192
Fiesta (CCT)
Maintenance
3
2
1
E161816
3. Unclip the bulb holder and remove it.
4. Remove the bulb.
E161817
2. Loosen the wing nut and carefully pull
out the rear lamp.
A
4
E161793
Reversing Lamp
E163004
3. Turn the bulb holder counterclockwise
and remove it.
4. Remove the bulb.
Center High Mounted Stop Lamp
1
Note: The LED board is not a serviceable
item, please consult your dealer if this fails.
E113384
1.
Remove the trim panel and disconnect
the electrical connector.
193
Fiesta (CCT)
Maintenance
License Plate Lamp
Reading Lamps
2
2
3
1
3
1
E72789
E99453
1. Carefully release the spring clip.
2. Remove the lamp.
3. Turn the bulb counterclockwise and
remove it.
1. Carefully remove the lamp.
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb.
Interior Lamp
Luggage Compartment Lamp,
Footwell Lamp and Liftgate Lamp
2
3
1
E99452
1. Carefully remove the lamp.
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb.
E72784
1. Carefully pry out the lamp.
2. Remove the bulb.
194
Fiesta (CCT)
Maintenance
CHANGING A BULB - VEHICLES
WITH: 5-DOOR
A
WARNINGS
Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Do not touch the glass of the bulb.
E161707
Note: Only fit bulbs of the correct
specification.
2. Remove the bulb holder.
3. Remove the bulb.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp Low Beam
1.
Headlamp
Remove the headlamp. See
Removing a Headlamp (page 189).
Note: Remove the covers to gain access to
the bulbs.
A
B
C
D
2
E159827
4
A
Side marker
B
Headlamp low beam
C
Headlamp high beam
D
Direction indicator
E146803
2. Remove the cover.
3. Disconnect the electrical connector.
4. Release the clip and remove the bulb.
Note: Do not touch the glass of the bulb.
Side Marker
1.
Remove the headlamp. See
Removing a Headlamp (page 189).
Headlamp High Beam
1.
195
Fiesta (CCT)
Remove the headlamp. See
Removing a Headlamp (page 189).
Maintenance
Side Direction Indicator
1
2
2
3
E146804
2. Remove the cover.
3. Turn the bulb counterclockwise and
remove it.
Note: Do not touch the glass of the bulb.
E112777
1.
Press the side of the cover to release
the clips.
2. Remove the cover.
Direction Indicator
1.
Remove the headlamp. See
Removing a Headlamp (page 189).
3
3
E112778
E146805
3. Remove the bulb and bulb holder.
Remove the bulb.
2. Turn the bulb holder counterclockwise
and remove it.
3. Gently press the bulb into the bulb
holder, turn it counterclockwise and
remove it.
196
Fiesta (CCT)
Maintenance
Front Fog Lamps
6
1
E161665
1.
Remove the retaining clips to gain
access to the lamp assembly.
5
E161670
5. Disconnect the electrical connector.
6. Turn the bulb holder counterclockwise
and remove it.
Rear Lamps
2
3
4
1
E161667
Note: You cannot separate the fog lamp
bulb from the bulb holder.
2. Using a suitable implement, remove
the cover.
3. Remove the screws.
4. Remove the lamp.
E102854
1.
197
Fiesta (CCT)
Remove the screws.
Maintenance
License Plate Lamp
2
1
3
E72789
1. Carefully release the spring clip.
2. Remove the lamp.
3. Turn the bulb counterclockwise and
remove it.
2
E161671
2. Disconnect the electrical connector.
3. Turn the bulb holder counterclockwise
and remove it.
A
Interior Lamp
2
B
3
1
E99452
E146871
1. Carefully remove the lamp.
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb.
C
4. Gently press the bulb into the bulb
holder, turn it counterclockwise and
remove it.
A. Indicator
B. Tail and brake
C. Reverse
Center High Mounted Stop Lamp
Note: The LED board is not a serviceable
item, please consult your dealer if this fails.
198
Fiesta (CCT)
Maintenance
Luggage Compartment Lamp,
Footwell Lamp and Liftgate Lamp
Reading Lamps
2
3
1
E99453
1. Carefully remove the lamp.
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb.
E72784
1. Carefully pry out the lamp.
2. Remove the bulb.
BULB SPECIFICATION CHART
Lamp
Specification
Power (watt)
PY27/7
27/7
Headlamp high beam
H1LL
55
Headlamp low beam
H11
55
Front fog lamp
H11
55
Side direction indicator
WY5W
5
Rear direction indicator
PY27/7
27/7
Brake and tail lamp
PY27/7
27/7
Reversing lamp
W16W
16
License plate lamp
W5W
5
Interior lamp
W6W
6
Reading lamp
W5W
5
Luggage compartment lamp
W5W
5
Front direction indicator
199
Fiesta (CCT)
Maintenance
Note: On some vehicles the lamps are LED.
These are not serviceable items, have your
vehicle checked by an authorized dealer as
soon as possible.
TECHNICAL SPECIFICATIONS
Vehicle Fluids
Item
Specification
WSS-M2C945-A
1
Engine oil
Automatic transmission
2
fluid
Manual transmission fluid
3
Engine coolant
4
Brake fluid
Recommended fluid
Motorcraft or equivalent
SAE 5W-20 engine oil certified by
API for gasoline engines.
WSS-M2C200-D2
-
Motorcraft dual clutch
transmission fluid
WSD-M2C200-C
-
Motorcraft full synthetic
manual transmission
fluid
WSS-M97B44-D2
-
Motorcraft orange antifreeze coolant prediluted
WSS-M6C65-A2 or
ISO 4925 Class 6
-
Motorcraft or Ford DOT
4 LV High Performance
Brake Fluid
200
Fiesta (CCT)
Viscosity
Grade
Maintenance
Item
Specification
Viscosity
Grade
Door latch, hood latch,
auxiliary hood latch, trunk
latch, seat tracks
ESB-M1C93-B
-
Multi purpose grease
(Lithium grease)
-
-
Motorcraft penetrating
and lock lubricant
Lock cylinder
Recommended fluid
1
Your engine has been designed to be used with Ford engine oil, which gives a fuel economy
benefit while maintaining the durability of your engine.
Using oils other than the one specified can result in longer engine cranking periods, reduced
engine performance and reduced fuel economy.
2
Automatic transmissions that require Motorcraft MERCON LV transmission fluid should
only use Motorcraft MERCON LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission damage.
Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance (page 368).
3
Add the coolant type originally used in your vehicle.
4
Use only Motorcraft DOT 4 LV High Performance Brake Fluid, or equivalent, meeting
WSS-M6C65-A2 or ISO 4925 Class 6. Use of any fluid other than the recommended fluid
may cause brake system damage.
Variant
Item
Capacity
All
Windshield and rear
window washer
system
2.6 qt (2.5 L)
All
Engine cooling
system
6.1 qt (5.8 L)
1.0L EcoBoost and 1.6L Duratec-16V TiVCT
Fuel tank
11.1 gal (42 L)
1.6L EcoBoost
Fuel tank
12.7 gal (48 L)
All
Engine lubrication
system - including
the oil filter
4.3 qt (4.1 L)
201
Fiesta (CCT)
Maintenance
Variant
Item
Capacity
1.0L EcoBoost
Engine lubrication
system - excluding
the oil filter
4.2 qt (4.0 L)
1.6L Duratec-16V Ti-VCT and 1.6L
EcoBoost
Engine lubrication
system - excluding
the oil filter
4 qt (3.8 L)
All
Automatic transmission
1.8 qt (1.7 L)
Engine Oil Adding Capacities
Engine
Capacity
All
*
*
0.8 qt (0.75 L)
The amount of oil required to raise the level on the dipstick from minimum to maximum.
202
Fiesta (CCT)
Vehicle Care
•
CLEANING PRODUCTS
For best results, use the following products
or products of equivalent quality:
•
Motorcraft Bug and Tar Remover (ZC-42)
Motorcraft Custom Bright Metal Cleaner
(ZC-15)
•
Motorcraft Detail Wash (ZC-3-A)
Motorcraft Dusting Cloth (ZC-24)
•
Motorcraft Engine Shampoo and
Degreaser (U.S. only) (ZC-20)
Motorcraft Engine Shampoo (Canada
only) (CXC-66-A)
Motorcraft Multi-Purpose Cleaner (Canada
only) (CXC-101)
•
Motorcraft Premium Glass Cleaner
(Canada only) (CXC-100)
Never use strong household detergents
or soap, such as dish washing or
laundry liquid. These products can
discolor and spot painted surfaces.
Never wash a vehicle that is “hot to the
touch” or during exposure to strong,
direct sunlight.
Dry the vehicle with a chamois or soft
terry cloth towel in order to eliminate
water spotting.
Immediately remove items such as
gasoline, diesel fuel, bird droppings and
insect deposits because they can cause
damage to the vehicle’s paintwork and
trim over time. Use Motorcraft® Bug
and Tar Remover.
Remove any exterior accessories, such
as antennas, before entering a car
wash.
Motorcraft Premium Quality Windshield
Washer Fluid (Canada only) [CXC-37-(A,
B, D or F)]
Note: Suntan lotions and insect repellents
can damage any painted surface; if these
substances come in contact with your
vehicle, wash off as soon as possible.
Motorcraft Premium Windshield Wash
Concentrate with Bitterant (U.S. only)
(ZC-32-A)
Exterior Chrome
Note: Never use abrasive materials such as
steel wool or plastic pads as they can
scratch the chrome surface.
Motorcraft Professional Strength Carpet
& Upholstery Cleaner (ZC-54)
Motorcraft Spot and Stain Remover (U.S.
only) (ZC-14)
Note: Do not use chrome cleaner, metal
cleaner or polish on wheels and wheel
covers
Motorcraft Ultra-Clear Spray Glass Cleaner
(ZC-23)
•
Motorcraft Vinyl Cleaner (Canada only)
(CXC-93)
Motorcraft Wheel and Tire Cleaner
(ZC-37-A)
•
CLEANING THE EXTERIOR
Wash your vehicle regularly with cool or
lukewarm water and a neutral pH
shampoo, such as Motorcraft® Detail
Wash.
203
Fiesta (CCT)
Wash the vehicle first, using cool or
lukewarm water and a neutral pH
shampoo, such as Motorcraft® Detail
Wash.
Use Motorcraft® Custom Bright Metal
Cleaner. Apply the product as you
would a wax to clean bumpers and
other chrome parts; allow the cleaner
to dry for a few minutes, then wipe off
the haze with a clean, dry rag.
Vehicle Care
•
•
Do not apply cleaning product to hot
surfaces and do not leave cleaning
product on chrome surfaces for a
period of time exceeding that which is
recommended.
Using other non-recommended
cleaners can result in severe and
permanent cosmetic damage.
•
Underbody
Flush the complete underside of your
vehicle frequently. Keep body and door
drain holes free from packed dirt.
•
•
Cleaning Plastic Exterior Parts
Use only approved products to clean
plastic parts
•
•
CLEANING THE ENGINE
For routine cleaning, use Motorcraft®
Detail Wash.
If tar or grease spots are present, use
Motorcraft® Bug and Tar Remover.
Engines are more efficient when they are
clean because grease and dirt buildup keep
the engine warmer than normal.
When washing:
• Take care when using a power washer
to clean the engine. The high-pressure
fluid could penetrate the sealed parts
and cause damage.
• Do not spray a hot engine with cold
water to avoid cracking the engine
block or other engine components.
• Spray Motorcraft® Engine Shampoo
and Degreaser on all parts that require
cleaning and pressure rinse clean. In
Canada, use Motorcraft® Engine
Shampoo.
• Never wash or rinse the engine while it
is hot or running; water in the running
engine may cause internal damage.
WAXING
Regular waxing is necessary to protect your
car's paint from the elements. We
recommend that you wash and wax the
painted surface once or twice a year.
When washing and waxing, park your
vehicle in a shaded area out of direct
sunlight. Always wash your vehicle before
applying wax.
•
•
•
Use a quality wax that does not contain
abrasives.
Follow the manufacturer’s instructions
to apply and remove the wax.
Apply a small amount of wax in a
back-and-forth motion, not in circles.
204
Fiesta (CCT)
Do not allow wax to come in contact
with any non-body (low-gloss black)
colored trim. The wax will discolor or
stain the parts over time.
• Roof racks.
• Bumpers.
• Grained door handles.
• Side mouldings.
• Mirror housings.
• Windshield cowl area.
Do not apply wax to glass areas.
After waxing, your car's paint should
feel smooth, and be free of streaks and
smudges.
Vehicle Care
•
•
Never wash or rinse any ignition coil,
spark plug wire or spark plug well, or
the area in and around these locations.
Cover the battery, power distribution
box, and air filter assembly to prevent
water damage when cleaning the
engine.
If you cannot remove those streaks after
cleaning with the glass cleaner or if the
wipers chatter and move in a jerky motion,
clean the outer surface of the windshield
and the wiper blades using a sponge or
soft cloth with a neutral detergent or
mild-abrasive cleaning solution. After
cleaning, rinse the windshield and wiper
blades with clean water. The windshield
is clean if beads do not form when you
rinse the windshield with water.
CLEANING THE WINDOWS AND
WIPER BLADES
Note: Do not use sharp objects, such as a
razorblade, to clean the inside of the rear
window or to remove decals, as this may
cause damage to the rear window
defroster’s heated grid lines.
Clean your windows and wiper blades
regularly. If the wipers do not wipe
properly, substances on the vehicle’s glass
or the wiper blades may cause squeaking
or chatter noise from the blades, and
streaking and smearing of the windshield.
CLEANING THE INTERIOR
To clean these items, follow these tips:
• You can clean the windows with a
non-abrasive cleaner such as
Motorcraft Ultra-Clear Spray Glass
Cleaner.
• You can clean the wiper blades with
isopropyl rubbing-alcohol or Motorcraft
Premium Windshield Wash
Concentrate with Bitterant in the U.S.,
or Premium Quality Windshield Washer
Fluid in Canada. Be sure to replace
wiper blades when they appear worn
or do not function properly.
• Do not use abrasives, as they may
cause scratches.
• Do not use fuel, kerosene, or paint
thinner to clean any parts.
WARNINGS
Do not use cleaning solvents, bleach
or dye on the vehicle’s safety belts,
as these actions may weaken the
belt webbing.
On vehicles equipped with
seat-mounted airbags, do not use
chemical solvents or strong
detergents. Such products could
contaminate the side airbag system and
affect performance of the side airbag in a
collision.
For fabric, carpets, cloth seats, safety belts
and seats equipped with side airbags:
• Remove dust and loose dirt with a
vacuum cleaner.
• Remove light stains and soil with
Motorcraft Professional Strength
Carpet & Upholstery Cleaner.
205
Fiesta (CCT)
Vehicle Care
•
•
•
If grease or tar is present on the
material, spot-clean the area first with
Motorcraft Spot and Stain Remover. In
Canada, use Motorcraft Multi-Purpose
Cleaner.
If a ring forms on the fabric after spot
cleaning, clean the entire area
immediately (but do not oversaturate)
or the ring will set.
Do not use household cleaning
products or glass cleaners, which can
stain and discolor the fabric and affect
the flame retardant abilities of the seat
materials.
Clean the instrument panel and cluster
lens with a clean, damp, white cotton
cloth, then use a clean and dry white
cotton cloth to dry these areas.
•
•
REPAIRING MINOR PAINT
DAMAGE
•
You should repair paintwork damage
caused by stones from the road or minor
scratches as soon as possible. A choice of
products are available from an authorized
dealer.
•
Remove particles such as bird droppings,
tree sap, insect deposits, tar spots, road
salt and industrial fallout before repairing
paint chips.
If a staining liquid like coffee or juice has
been spilled on the instrument panel or on
interior trim surfaces, clean as follows:
1.
Wipe up spilled liquid using a clean,
white, cotton cloth.
2. Wipe the surface with a damp, clean,
white cotton cloth. For more thorough
cleaning, use a mild soap and water
solution. If the spot cannot be
completely cleaned by this method,
the area may be cleaned using a
commercially available cleaning
product designed for automotive
interiors.
3. If necessary, apply more soap and
water solution or cleaning product to
a clean, white, cotton cloth and press
the cloth onto the soiled area. Allow
this to set at room temperature for 30
minutes.
Always read and follow the manufacturer’s
instructions before using the products.
CLEANING THE INSTRUMENT
PANEL AND INSTRUMENT
CLUSTER LENS
WARNING
Do not use chemical solvents or
strong detergents when cleaning the
steering wheel or instrument panel
to avoid contamination of the airbag
system.
206
Fiesta (CCT)
Avoid cleaners or polishes that increase
the gloss of the upper portion of the
instrument panel. The dull finish in this
area helps protect you from
undesirable windshield reflection.
Be certain to wash or wipe your hands
clean if you have been in contact with
certain products such as insect
repellent and suntan lotion in order to
avoid possible damage to the interior
painted surfaces.
Do not use household or glass cleaners
as these may damage the finish of the
instrument panel, interior trim and
cluster lens.
Do not allow air fresheners and hand
sanitizers to spill onto interior surfaces.
If a spill occurs, wipe off immediately.
Damage may not be covered by your
warranty.
Vehicle Care
4. Remove the soaked cloth and if it is not
soiled badly, use this cloth to clean the
area by using a rubbing motion for 60
seconds.
5. Following this, wipe area dry with a
clean, white, cotton cloth.
CLEANING THE ALLOY
WHEELS
Note: Do not apply a cleaning chemical to
warm or hot wheel rims and covers.
Note: Industrial-strength (heavy-duty)
cleaners, or cleaning chemicals, in
combination with brush agitation to remove
brake dust and dirt, could wear away the
clear coat finish over a period of time.
CLEANING LEATHER SEATS (IF
EQUIPPED)
Note: Do not use hydrofluoric acid-based
or high caustic-based wheel cleaners, steel
wool, fuels or strong household detergent.
For routine cleaning, wipe the surface with
a soft, damp cloth. For more thorough
cleaning, wipe the surface with a mild soap
and water solution. Dry the area with a soft
cloth. In Canada, use Motorcraft® Vinyl
Cleaner.
Note: If you intend parking your vehicle for
an extended period after cleaning the
wheels with a wheel cleaner, drive your
vehicle for a few minutes before doing so.
This will reduce the risk of increased
corrosion of the brake discs, brake pads and
linings.
If the leather cannot be completely
cleaned using a mild soap and water
solution, the leather may be cleaned using
a commercially available leather cleaning
product designed for automotive interiors.
Note: Some automatic car washes may
cause damage to the finish on your wheel
rims and covers.
Note: To check for compatibility, first test
any cleaner or stain remover on an
inconspicuous part of the leather.
Alloy wheels and wheel covers are coated
with a clear coat paint finish. To maintain
their condition we recommend that you:
• Clean them weekly with the
recommended wheel and tire cleaner.
• Use a sponge to remove heavy
deposits of dirt and brake dust
accumulation.
• Rinse them thoroughly with a
pressurized stream of water when you
have completed the cleaning process.
You should:
•
•
•
remove dust and loose dirt with a
vacuum cleaner.
clean spills and stains as quickly as
possible.
To check for compatibility, first test any
cleaner or stain remover on an
inconspicuous part of the leather.
Do not use the following products as these
may damage the leather:
•
•
•
•
We recommend that you use Ford service
wheel cleaner. Make sure that you read
and follow the manufacturer’s instructions.
oil/petroleum-based leather
conditioners.
household cleaners.
alcohol solutions.
solvents or cleaners intended for
rubber, vinyl and plastics.
Using other non-recommended cleaning
products can result in severe and
permanent cosmetic damage.
207
Fiesta (CCT)
Vehicle Care
Engine
VEHICLE STORAGE
•
If you plan on storing your vehicle for an
extended period of time (30 days or more),
read the following maintenance
recommendations to make sure your
vehicle stays in good operating condition.
•
All motor vehicles and their components
were engineered and tested for reliable,
regular driving. Long term storage under
various conditions may lead to component
degradation or failure unless specific
precautions are taken to preserve the
components.
•
Fuel system
•
General
•
•
•
Store all vehicles in a dry, ventilated
place.
Protect from sunlight, if possible.
If vehicles are stored outside, they
require regular maintenance to protect
against rust and damage.
•
•
•
•
•
•
Wash vehicle thoroughly to remove
dirt, grease, oil, tar or mud from exterior
surfaces, rear-wheel housing and
underside of front fenders.
Periodically wash vehicles stored in
exposed locations.
Touch-up raw or primed metal to
prevent rust
Cover chrome and stainless steel parts
with a thick coat of auto wax to prevent
discoloration. Re-wax as necessary
when the vehicle is washed.
Lubricate all hood, door and trunk lid
hinges, and latches with a light grade
oil.
Cover interior trim to prevent fading.
Keep all rubber parts free from oil and
solvents.
Cooling system
•
•
Protect against freezing temperatures.
When removing vehicle from storage,
check coolant fluid level. Confirm there
are no cooling system leaks, and fluid
is at the recommended level.
Battery
•
•
208
Fiesta (CCT)
Fill the fuel tank with high-quality fuel
until the first automatic shutoff of the
fuel pump nozzle.
Note: During extended periods of vehicle
storage (30 days or more), fuel may
deteriorate due to oxidation. Add a quality
gas stabilizer product to the vehicle fuel
system whenever actual or expected
storage periods exceed 30 days. Follow the
instructions on the additive label. The
vehicle should then be operated at idle
speed to circulate the additive throughout
the fuel system.
Body
•
The engine oil and filter should be
changed prior to storage, as used
engine oil contain contaminates that
may cause engine damage.
Start the engine every 15 days. Run at
fast idle until it reaches normal
operating temperature
With your foot on the brake, shift
through all the gears while the engine
is running.
Check and recharge as necessary. Keep
connections clean.
If storing your vehicle for more than 30
days without recharging the battery, it
may be advisable to disconnect the
battery cables to ensure battery charge
is maintained for quick starting.
Vehicle Care
Contact your authorized dealer if you have
any concerns or issues.
Note: If battery cables are disconnected, it
will be necessary to reset memory features.
Brakes
•
Make sure brakes and parking brake
are fully released.
Tires
•
Maintain recommended air pressure.
Miscellaneous
•
•
Make sure all linkages, cables, levers
and pins under vehicle are covered with
grease to prevent rust.
Move vehicles at least 25 feet (8
meters) every 15 days to lubricate
working parts and prevent corrosion.
Removing Vehicle From Storage
When your vehicle is ready to come out of
storage, do the following:
• Wash your vehicle to remove any dirt
or grease film build-up on window
surfaces.
• Check windshield wipers for any
deterioration.
• Check under the hood for any foreign
material that may have collected
during storage (mice/squirrel nests).
• Check the exhaust for any foreign
material that may have collected
during storage.
• Check tire pressures and set tire
inflation per the Tire Label.
• Check brake pedal operation. Drive the
vehicle 15 feet (4.5 meters) back and
forth to remove rust build-up.
• Check fluid levels (including coolant,
oil and gas) to make sure there are no
leaks, and fluids are at recommended
levels.
• If the battery was removed, clean the
battery cable ends and inspect.
209
Fiesta (CCT)
Wheels and Tires
Note: Your vehicle’s warranty does not
cover these types of damage. Tires should
always be kept at the correct inflation
pressures and extra caution should be taken
when operating on rough roads to avoid
impacts that could cause wheel and tire
damage.
GENERAL INFORMATION
A decal with tire pressure data is located
in the driver’s door opening.
Check and set the tire pressure at the
ambient temperature in which you are
intending to drive your vehicle and when
the tires are cold.
Information About Uniform Tire
Quality Grading
Note: Check your tire pressures regularly to
optimize fuel economy.
Note: Use only approved wheel and tire
sizes. Using other sizes could damage your
vehicle and will make the National Type
Approval invalid.
Note: If you change the diameter of the tires
from that fitted at the factory, the
speedometer may not display the correct
speed. Take your vehicle to an authorized
dealer to have the engine management
system reprogrammed.
E142542
Note: If you intend to change the size of the
wheels from that fitted at the factory, check
the suitability with an authorized dealer.
Tire Quality Grades apply to new
pneumatic passenger car tires. The Quality
grades can be found where applicable on
the tire sidewall between tread shoulder
and maximum section width. For example:
Treadwear 200 Traction AA
Temperature A.
TIRE CARE
Important information for 205/40R17
low-profile tires and wheels If your
vehicle is equipped with 205/40R17 tires,
they are low-profile tires. These tires and
wheels are designed to give your vehicle a
sport appearance. With low-profile tires,
you may notice an increase in road noise
and faster tire wear, depending on road
conditions and driving styles. Due to their
design, low-profile tires and wheels are
more prone to road damage from potholes,
rough or unpaved roads, car wash rails and
curb contact than standard tires and
wheels.
These Tire Quality Grades are determined
by standards that the United States
Department of Transportation has set.
Tire Quality Grades apply to new
pneumatic passenger car tires. They do
not apply to deep tread, winter-type snow
tires, space-saver or temporary use spare
tires, light truck or LT type tires, tires with
nominal rim diameters of 10 to 12 inches
or limited production tires as defined in
Title 49 Code of Federal Regulations Part
575.104 ©)(2).
210
Fiesta (CCT)
Wheels and Tires
Temperature A B C
U.S. Department of Transportation Tire
quality grades: The U.S. Department of
Transportation requires Ford Motor
Company to give you the following
information about tire grades exactly as
the government has written it.
WARNING
The temperature grade for this tire
is established for a tire that is
properly inflated and not overloaded.
Excessive speed, under-inflation, or
excessive loading, either separately or in
combination, can cause heat buildup and
possible tire failure.
Treadwear
The treadwear grade is a comparative
rating based on the wear rate of the tire
when tested under controlled conditions
on a specified government test course. For
example, a tire graded 150 would wear one
and one-half (1 ½) times as well on the
government course as a tire graded 100.
The relative performance of tires depends
upon the actual conditions of their use,
however, and may depart significantly from
the norm due to variations in driving habits,
service practices, and differences in road
characteristics and climate.
The temperature grades are A (the
highest), B and C, representing the tire’s
resistance to the generation of heat and
its ability to dissipate heat when tested
under controlled conditions on a specified
indoor laboratory test wheel. Sustained
high temperature can cause the material
of the tire to degenerate and reduce tire
life, and excessive temperature can lead
to sudden tire failure. The grade C
corresponds to a level of performance
which all passenger car tires must meet
under the Federal Motor Vehicle Safety
Standard No. 139. Grades B and A
represent higher levels of performance on
the laboratory test wheel than the
minimum required by law.
Traction AA A B C
WARNING
The traction grade assigned to this
tire is based on straight-ahead
braking traction tests, and does not
include acceleration, cornering,
hydroplaning or peak traction
characteristics.
Glossary of Tire Terminology
* Tire label: A label showing the
OE (Original Equipment) tire sizes,
recommended inflation pressure
and the maximum weight the
vehicle can carry.
The traction grades, from highest to lowest
are AA, A, B, and C. The grades represent
the tire’s ability to stop on wet pavement
as measured under controlled conditions
on specified government test surfaces of
asphalt and concrete. A tire marked C may
have poor traction performance.
*Tire Identification Number
(TIN): A number on the sidewall
of each tire providing information
about the tire brand and
manufacturing plant, tire size and
date of manufacture. Also referred
to as DOT code.
211
Fiesta (CCT)
Wheels and Tires
*Recommended inflation
pressure: The cold inflation
pressure found on the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position), or Tire Label located on
the B-Pillar or the edge of the
driver’s door.
*Inflation pressure: A measure
of the amount of air in a tire.
*Standard load: A class of
P-metric or Metric tires designed
to carry a maximum load at 35 psi
[37 psi (2.5 bar) for Metric tires].
Increasing the inflation pressure
beyond this pressure will not
increase the tire’s load carrying
capability.
*Extra load: A class of P-metric
or Metric tires designed to carry a
heavier maximum load at 41 psi
[43 psi (2.9 bar) for Metric tires].
Increasing the inflation pressure
beyond this pressure will not
increase the tire’s load carrying
capability.
*B-pillar: The structural member
at the side of the vehicle behind
the front door
* Bead area of the tire: Area of
the tire next to the rim.
* Sidewall of the tire: Area
between the bead area and the
tread.
*kPa: Kilopascal, a metric unit of
air pressure.
* Tread area of the tire: Area of
the perimeter of the tire that
contacts the road when mounted
on the vehicle.
*PSI: Pounds per square inch, a
standard unit of air pressure.
*Cold tire pressure: The tire
pressure when the vehicle has
been stationary and out of direct
sunlight for an hour or more and
prior to the vehicle being driven for
1 mile (1.6 kilometers).
*Rim: The metal support (wheel)
for a tire or a tire and tube
assembly upon which the tire
beads are seated.
Information Contained on the Tire
Sidewall
Both U.S. and Canada Federal
regulations require tire
manufacturers to place
standardized information on the
sidewall of all tires. This
information identifies and
212
Fiesta (CCT)
Wheels and Tires
A. P: Indicates a tire, designated
by the Tire and Rim Association
(T&RA), that may be used for
service on cars, SUVs, minivans
and light trucks. Note: If your tire
size does not begin with a letter
this may mean it is designated by
either ETRTO (European Tire and
Rim Technical Organization) or
JATMA (Japan Tire Manufacturing
Association).
describes the fundamental
characteristics of the tire and also
provides a U.S. DOT Tire
Identification Number for safety
standard certification and in case
of a recall.
Information on P Type Tires
C D
B
E
F
G
H
A
B. 215: Indicates the nominal
width of the tire in millimeters
from sidewall edge to sidewall
edge. In general, the larger the
number, the wider the tire.
I
C. 65: Indicates the aspect ratio
which gives the tire's ratio of
height to width.
J
M
L
D. R: Indicates a radial type tire.
K
E. 15: Indicates the wheel or rim
diameter in inches. If you change
your wheel size, you will have to
purchase new tires to match the
new wheel diameter.
E142543
P215/65R15 95H is an example of
a tire size, load index and speed
rating. The definitions of these
items are listed below. (Note that
the tire size, load index and speed
rating for your vehicle may be
different from this example.)
F. 95: Indicates the tire's load
index. It is an index that relates to
how much weight a tire can carry.
You may find this information in
your owner’s manual. If not,
contact a local tire dealer.
Note: You may not find this information on
all tires because it is not required by federal
law.
213
Fiesta (CCT)
Wheels and Tires
G. H: Indicates the tire's speed
rating. The speed rating denotes
the speed at which a tire is
designed to be driven for extended
periods of time under a standard
condition of load and inflation
pressure. The tires on your vehicle
may operate at different
conditions for load and inflation
pressure. These speed ratings may
need to be adjusted for the
difference in conditions. The
ratings range from 81 mph (130
km/h) to 186 mph (299 km/h).
These ratings are listed in the
following chart.
Speed rating - mph (km/
h)
M
81 mph (130 km/h)
N
87 mph (140 km/h)
Q
99 mph (159 km/h)
R
106 mph (171 km/h)
S
112 mph (180 km/h)
T
118 mph (190 km/h)
U
124 mph (200 km/h)
H
130 mph (210 km/h)
V
149 mph (240 km/h)
Speed rating - mph (km/
h)
W
168 mph (270 km/h)
Y
186 mph (299 km/h)
Note: For tires with a maximum speed
capability over 149 mph (240 km/h), tire
manufacturers sometimes use the letters
ZR. For those with a maximum speed
capability over 186 mph (299 km/h), tire
manufacturers always use the letters ZR.
H. U.S. DOT Tire Identification
Number (TIN): This begins with
the letters DOT and indicates that
the tire meets all federal
standards. The next two numbers
or letters are the plant code
designating where it was
manufactured, the next two are
the tire size code and the last four
numbers represent the week and
year the tire was built. For
example, the numbers 317 mean
the 31st week of 1997. After 2000
the numbers go to four digits. For
example, 2501 means the 25th
week of 2001. The numbers in
between are identification codes
used for traceability. This
information is used to contact
customers if a tire defect requires
a recall.
Note: You may not find this information on
all tires because it is not required by federal
law.
Letter rating
Letter rating
I. M+S or M/S: Mud and Snow, or
AT: All Terrain, or
AS: All Season.
214
Fiesta (CCT)
Wheels and Tires
J. Tire Ply Composition and
Material Used: Indicates the
number of plies or the number of
layers of rubber-coated fabric in
the tire tread and sidewall. Tire
manufacturers also must indicate
the ply materials in the tire and the
sidewall, which include steel,
nylon, polyester, and others.
*Traction: The traction grades,
from highest to lowest are AA, A,
B, and C. The grades represent the
tire's ability to stop on wet
pavement as measured under
controlled conditions on specified
government test surfaces of
asphalt and concrete. A tire
marked C may have poor traction
performance.
K. Maximum Load: Indicates the
maximum load in kilograms and
pounds that can be carried by the
tire. Refer to the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position), for the correct tire
pressure for your vehicle.
*Temperature: The temperature
grades are A (the highest), B and
C, representing the tire's
resistance to the generation of
heat and its ability to dissipate
heat when tested under controlled
conditions on a specified indoor
laboratory test wheel.
M. Maximum Inflation
Pressure: Indicates the tire
manufacturers' maximum
permissible pressure or the
pressure at which the maximum
load can be carried by the tire. This
pressure is normally higher than
the vehicle manufacturer's
recommended cold inflation
pressure which can be found on
the Safety Compliance
Certification Label (affixed to
either the door hinge pillar,
door-latch post, or the door edge
that meets the door-latch post,
next to the driver's seating
L. Treadwear, Traction and
Temperature Grades:
*Treadwear The treadwear grade
is a comparative rating based on
the wear rate of the tire when
tested under controlled conditions
on a specified government test
course. For example, a tire graded
150 would wear one and one-half
times as well on the government
course as a tire graded 100.
215
Fiesta (CCT)
Wheels and Tires
A. LT: Indicates a tire, designated
by the Tire and Rim Association
(T&RA), that is intended for
service on light trucks.
position), or Tire Label which is
located on the B-Pillar or the edge
of the driver’s door. The cold
inflation pressure should never be
set lower than the recommended
pressure on the vehicle label.
B. Load Range and Load
Inflation Limits: Indicates the
tire's load-carrying capabilities
and its inflation limits.
The tire suppliers may have
additional markings, notes or
warnings such as standard load,
radial tubeless, etc.
C. Maximum Load Dual lb (kg)
at psi (kPa) cold: Indicates the
maximum load and tire pressure
when the tire is used as a dual;
defined as four tires on the rear
axle (a total of six or more tires on
the vehicle).
Additional Information Contained on
the Tire Sidewall for LT Type Tires
Note: Tire Quality Grades do not apply to
this type of tire.
B
D. Maximum Load Single lb
(kg) at psi (kPa) cold: Indicates
the maximum load and tire
pressure when the tire is used as
a single; defined as two tires
(total) on the rear axle.
C
A
Information on T Type Tires
T145/80D16 is an example of a
tire size.
D
E142544
Note: The temporary tire size for your
vehicle may be different from this example.
Tire Quality Grades do not apply to this type
of tire.
B
LT type tires have some additional
information beyond those of P
type tires; these differences are
described below.
216
Fiesta (CCT)
Wheels and Tires
B
A
C
C. 80: Indicates the aspect ratio
which gives the tire's ratio of
height to width. Numbers of 70 or
lower indicate a short sidewall.
D
E
D. D: Indicates a diagonal type tire.
R: Indicates a radial type tire.
E. 16: Indicates the wheel or rim
diameter in inches. If you change
your wheel size, you will have to
purchase new tires to match the
new wheel diameter.
Location of the Tire Label
You will find a Tire Label
containing tire inflation pressure
by tire size and other important
information located on the B-Pillar
or the edge of the driver’s door.
E142545
Inflating Your Tires
T type tires have some additional
information beyond those of P
type tires; these differences are
described below:
Safe operation of your vehicle
requires that your tires are
properly inflated. Remember that
a tire can lose up to half of its air
pressure without appearing flat.
A. T: Indicates a type of tire,
designated by the Tire and Rim
Association (T&RA), that is
intended for temporary service on
cars, SUVs, minivans and light
trucks.
Every day before you drive, check
your tires. If one looks lower than
the others, use a tire gauge to
check pressure of all tires and
adjust if required.
B. 145: Indicates the nominal width of the
tire in millimeters from sidewall edge to
sidewall edge. In general, the larger the
number, the wider the tire.
217
Fiesta (CCT)
Wheels and Tires
At least once a month and before
long trips, inspect each tire and
check the tire pressure with a tire
gauge (including spare, if
equipped). Inflate all tires to the
inflation pressure recommended
by Ford Motor Company.
Always inflate your tires to the
Ford recommended inflation
pressure even if it is less than the
maximum inflation pressure
information found on the tire. The
Ford recommended tire inflation
pressure is found on the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position), or Tire Label which is
located on the B-Pillar or the edge
of the driver’s door. Failure to
follow the tire pressure
recommendations can cause
uneven treadwear patterns and
adversely affect the way your
vehicle handles
You are strongly urged to buy a
reliable tire pressure gauge, as
automatic service station gauges
may be inaccurate. Ford
recommends the use of a digital
or dial-type tire pressure gauge
rather than a stick-type tire
pressure gauge.
Use the recommended cold
inflation pressure for optimum tire
performance and wear.
Under-inflation or over-inflation
may cause uneven treadwear
patterns
Maximum Inflation Pressure is
the tire manufacturer's maximum
permissible pressure and the
pressure at which the maximum
load can be carried by the tire. This
pressure is normally higher than
the manufacturer’s recommended
cold inflation pressure which can
be found on the Safety
Compliance Certification Label
(affixed to either the door hinge
pillar, door-latch post, or the door
edge that meets the door-latch
post, next to the driver's seating
position), or Tire Label which is
located on the B-Pillar or the edge
WARNING
Under-inflation is the most common
cause of tire failures and may result
in severe tire cracking, tread
separation or blowout, with unexpected
loss of vehicle control and increased risk
of injury. Under-inflation increases sidewall
flexing and rolling resistance, resulting in
heat buildup and internal damage to the
tire. It also may result in unnecessary tire
stress, irregular wear, loss of vehicle
control and accidents. A tire can lose up
to half of its air pressure and not appear
to be flat!
218
Fiesta (CCT)
Wheels and Tires
of the driver’s door. The cold
inflation pressure should never be
set lower than the recommended
pressure on the Safety
Compliance Certification Label or
Tire Label.
2. Remove the cap from the valve
on one tire, then firmly press the
tire gauge onto the valve and
measure the pressure.
3. Add enough air to reach the
recommended air pressure.
When weather temperature
changes occur, tire inflation
pressures also change. A 10°F
(6°C) temperature drop can
cause a corresponding drop of 1
psi (7 kPa) in inflation pressure.
Check your tire pressures
frequently and adjust them to the
proper pressure which can be
found on the Safety Compliance
Certification Label or Tire Label.
Note: If you overfill the tire, release air by
pressing on the metal stem in the center of
the valve. Then recheck the pressure with
your tire gauge.
4. Replace the valve cap.
5. Repeat this procedure for each
tire, including the spare.
Note: Some spare tires operate at a higher
inflation pressure than the other tires. For T
type mini-spare tires (refer to the Dissimilar
spare wheel and tire assembly information
for a description): Store and maintain at 60
psi (4.15 bar). For full-size and dissimilar
spare tires (refer to the Dissimilar spare
wheel and tire assembly information for a
description): Store and maintain at the
higher of the front and rear inflation pressure
as shown on the Tire Label.
To check the pressure in your
tire(s):
1. Make sure the tires are cool,
meaning they are not hot from
driving even a mile.
6. Visually inspect the tires to
make sure there are no nails or
other objects embedded that
could poke a hole in the tire and
cause an air leak.
Note: If you are checking tire pressure when
the tire is hot, (i.e. driven more than 1 mile
[1.6 km]), never bleed or reduce air pressure.
The tires are hot from driving and it is normal
for pressures to increase above
recommended cold pressures. A hot tire at
or below recommended cold inflation
pressure could be significantly
under-inflated.
7. Check the sidewalls to make
sure there are no gouges, cuts or
bulges.
Note: If you have to drive a distance to get
air for your tire(s), check and record the tire
pressure first and add the appropriate air
pressure when you get to the pump. It is
normal for tires to heat up and the air
pressure inside to go up as you drive.
219
Fiesta (CCT)
Wheels and Tires
Inspecting Your Tires and Wheel Valve
Stems
Tire Wear
Periodically inspect the tire treads
for uneven or excessive wear and
remove objects such as stones,
nails or glass that may be wedged
in the tread grooves. Check the tire
and valve stems for holes, cracks,
or cuts that may permit air
leakage and repair or replace the
tire and replace the valve stem.
Inspect the tire sidewalls for
cracking, cuts, bruises and other
signs of damage or excessive
wear. If internal damage to the tire
is suspected, have the tire
demounted and inspected in case
it needs to be repaired or replaced.
For your safety, tires that are
damaged or show signs of
excessive wear should not be used
because they are more likely to
blow out or fail.
E142546
When the tread is worn down to
one sixteenth of an inch (2 mm),
tires must be replaced to help
prevent your vehicle from skidding
and hydroplaning. Built-in
treadwear indicators, or wear bars,
which look like narrow strips of
smooth rubber across the tread
will appear on the tire when the
tread is worn down to one
sixteenth of an inch (2 mm)
When the tire tread wears down
to the same height as these wear
bars, the tire is worn out and must
be replaced.
Improper or inadequate vehicle
maintenance can cause tires to
wear abnormally. Inspect all your
tires, including the spare,
frequently, and replace them if
one or more of the following
conditions exist:
Damage
Periodically inspect the tire treads
and sidewalls for damage (such
as bulges in the tread or sidewalls,
cracks in the tread groove and
separation in the tread or
sidewall). If damage is observed
220
Fiesta (CCT)
Wheels and Tires
This begins with the letters DOT
and indicates that the tire meets
all federal standards. The next
two numbers or letters are the
plant code designating where it
was manufactured, the next two
are the tire size code and the last
four numbers represent the week
and year the tire was built. For
example, the numbers 317 mean
the 31st week of 1997. After 2000
the numbers go to four digits. For
example, 2501 means the 25th
week of 2001. The numbers in
between are identification codes
used for traceability. This
information is used to contact
customers if a tire defect requires
a recall.
or suspected have the tire
inspected by a tire professional.
Tires can be damaged during
off-road use, so inspection after
off-road use is also
recommended.
Age
WARNING
Tires degrade over time depending
on many factors such as weather,
storage conditions, and conditions
of use (load, speed, inflation pressure, etc.)
the tires experience throughout their lives.
In general, tires should be replaced after
six years regardless of tread wear.
However, heat caused by hot climates or
frequent high loading conditions can
accelerate the aging process and may
require tires to be replaced more
frequently.
Tire Replacement Requirements
You should replace your spare tire when
you replace the road tires or after six years
due to aging even if it has not been used.
Your vehicle is equipped with tires
designed to provide a safe ride
and handling capability.
U.S. DOT Tire Identification Number
(TIN)
WARNINGS
Only use replacement tires and
wheels that are the same size, load
index, speed rating and type (such
as P-metric versus LT-metric or all-season
versus all-terrain) as those originally
provided by Ford. The recommended tire
and wheel size may be found on either the
Safety Compliance Certification Label
(affixed to either the door hinge pillar,
door-latch post, or the door edge that
meets the door-latch post, next to the
driver's seating position), or the Tire Label
which is located on the B-Pillar or edge of
the driver’s door. If this information is not
found on these labels then you should
contact your authorized dealer as soon as
Both U.S. and Canada Federal
regulations require tire
manufacturers to place
standardized information on the
sidewall of all tires. This
information identifies and
describes the fundamental
characteristics of the tire and also
provides a U.S. DOT Tire
Identification Number for safety
standard certification and in case
of a recall.
221
Fiesta (CCT)
Wheels and Tires
WARNINGS
possible. Use of any tire or wheel not
recommended by Ford can affect the
safety and performance of your vehicle,
which could result in an increased risk of
loss of vehicle control, vehicle rollover,
personal injury and death. Additionally the
use of non-recommended tires and wheels
could cause steering, suspension, axle,
transfer case or power transfer unit failure.
If you have questions regarding tire
replacement, contact your authorized
dealer as soon as possible.
WARNINGS
Always inflate steel carcass tires with a
remote air fill with the person inflating
standing at a minimum of 12 ft (3.66 m)
away from the wheel and tire assembly
Important: Remember to replace
the wheel valve stems when the
road tires are replaced on your
vehicle
It is recommended that the two
front tires or two rear tires
generally be replaced as a pair.
When mounting replacement tires
and wheels, you should not exceed
the maximum pressure indicated on
the sidewall of the tire to set the beads
without additional precautions listed
below. If the beads do not seat at the
maximum pressure indicated, re-lubricate
and try again
The tire pressure sensors mounted
in the wheels (originally installed
on your vehicle) are not designed
to be used in aftermarket wheels.
The use of wheels or tires not
recommended by Ford Motor
Company may affect the
operation of your tire pressure
monitoring system.
When inflating the tire for mounting
pressures up to 20 psi (1.38 bar) greater
than the maximum pressure on the tire
sidewall, the following precautions must
be taken to protect the person mounting
the tire:
If the TPMS indicator is flashing,
your TPMS is malfunctioning. Your
replacement tire might be
incompatible with your TPMS, or
some component of the TPMS
may be damaged.
1. Make sure that you have the correct tire
and wheel size.
2. Lubricate the tire bead and wheel bead
seat area again.
3. Stand at a minimum of 12 ft (3.66 m)
away from the wheel and tire assembly.
Safety Practices
4. Use both eye and ear protection.
WARNINGS
If your vehicle is stuck in snow, mud,
sand, etc., do not rapidly spin the
tires; spinning the tires can tear the
tire and cause an explosion. A tire can
explode in as little as three to five seconds.
For a mounting pressure more than 20 psi
(1.38 bar) greater than the maximum
pressure, a Ford dealer or other tire service
professional should do the mounting.
222
Fiesta (CCT)
Wheels and Tires
Driving habits have a great deal to do
with your tire mileage and safety.
replace it with your spare tire and
wheel. If you cannot detect a
cause, have the vehicle towed to
the nearest repair facility or tire
dealer to have the vehicle
inspected.
*Observe posted speed limits
Tire and Wheel Alignment
*Avoid fast starts, stops and turns
A bad jolt from hitting a curb or
pothole can cause the front end
of your vehicle to become
misaligned or cause damage to
your tires. If your vehicle seems to
pull to one side when you’re
driving, the wheels may be out of
alignment. Have an authorized
dealer check the wheel alignment
periodically.
WARNINGS
Do not spin the wheels at over 35
mph (56 km/h). The tires may fail
and injure a passenger or bystander.
*Avoid potholes and objects on
the road
*Do not run over curbs or hit the
tire against a curb when parking
Highway Hazards
No matter how carefully you drive
there’s always the possibility that
you may eventually have a flat tire
on the highway. Drive slowly to the
closest safe area out of traffic.
This may further damage the flat
tire, but your safety is more
important.
Wheel misalignment in the front
or the rear can cause uneven and
rapid treadwear of your tires and
should be corrected by an
authorized dealer. Front-wheel
drive vehicles and those with an
independent rear suspension (if
equipped) may require alignment
of all four wheels.
If you feel a sudden vibration or
ride disturbance while driving, or
you suspect your tire or vehicle
has been damaged, immediately
reduce your speed. Drive with
caution until you can safely pull
off the road. Stop and inspect the
tires for damage. If a tire is
under-inflated or damaged,
deflate it, remove wheel and
The tires should also be balanced
periodically. An unbalanced tire
and wheel assembly may result in
irregular tire wear.
Tire Rotation
Note: If your tires show uneven wear ask
an authorized dealer to check for and correct
any wheel misalignment, tire imbalance or
mechanical problem involved before tire
rotation.
223
Fiesta (CCT)
Wheels and Tires
Summer Tires
Note: Your vehicle may be equipped with
a dissimilar spare wheel and tire assembly.
A dissimilar spare wheel and tire assembly
is defined as a spare wheel and tire
assembly that is different in brand, size or
appearance from the road tires and wheels.
If you have a dissimilar spare wheel and tire
assembly it is intended for temporary use
only and should not be used in a tire
rotation.
Your Ford vehicle may be
equipped with summer tires to
provide superior performance on
wet and dry roads. Summer tires
do not have the Mud and Snow
(M+S or M/S) tire traction rating
on the tire side wall. Since
summer tires do not have the
same traction performance as
All-season or Snow tires, Ford
does not recommend using
summer tires when temperatures
drop to approximately 40°F (5°C)
or below (depending on tire wear
and environmental conditions) or
in snow and ice conditions. Like
any tire, summer tire performance
is affected by tire wear and
environmental conditions. If you
must drive in those conditions,
Ford recommends using Mud and
Snow (M+S, M/S), All-season or
Snow tires.
Note: After having your tires rotated,
inflation pressure must be checked and
adjusted to the vehicle requirements.
Rotating your tires at the
recommended interval (as
indicated in the Scheduled
Maintenance chapter) will help
your tires wear more evenly,
providing better tire performance
and longer tire life.
Front-wheel drive vehicles (front
tires on the left side of the
diagram)
USING WINTER TIRES
WARNING
When you use winter tires on your
vehicle, you must make sure that you
use the correct lug nuts.
E142547
If winter tires are used, you must make sure
that you use the correct tire pressures.
Sometimes irregular tire wear can
be corrected by rotating the tires.
224
Fiesta (CCT)
Wheels and Tires
them to the proper pressure. Driving on a
significantly under-inflated tire causes the
tire to overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency
and tire tread life, and may affect the
vehicle’s handling and stopping ability.
USING SNOW CHAINS
WARNING
Your vehicle is not approved for use
with snow chains.
Please note that the TPMS is not a
substitute for proper tire maintenance, and
it is the driver’s responsibility to maintain
correct tire pressure, even if under-inflation
has not reached the level to trigger
illumination of the TPMS low tire pressure
telltale.
TIRE PRESSURE MONITORING
SYSTEM
WARNING
The tire pressure monitoring system
is not a substitute for manually
checking tire pressure. The tire
pressure should be checked periodically
(at least monthly) using a tire gauge, see
Inflating your tires in this chapter. Failure
to properly maintain your tire pressure
could increase the risk of tire failure, loss
of control, vehicle rollover and personal
injury.
Your vehicle has also been equipped with
a TPMS malfunction indicator to indicate
when the system is not operating properly.
The TPMS malfunction indicator is
combined with the low tire pressure
telltale. When the system detects a
malfunction, the telltale will flash for
approximately one minute and then remain
continuously illuminated. This sequence
will continue upon subsequent vehicle
start-ups as long as the malfunction exists.
Each tire, including the spare (if
provided), should be checked
monthly when cold and inflated
to the inflation pressure
recommended by the vehicle manufacturer
on the vehicle placard or tire inflation
pressure label. (If your vehicle has tires of
a different size than the size indicated on
the vehicle placard or tire inflation pressure
label, you should determine the proper tire
inflation pressure for those tires.)
When the malfunction indicator is
illuminated, the system may not be able
to detect or signal low tire pressure as
intended. TPMS malfunctions may occur
for a variety of reasons, including the
installation of replacement or alternate
tires or wheels on the vehicle that prevent
the TPMS from functioning properly.
Always check the TPMS malfunction
telltale after replacing one or more tires or
wheels on your vehicle to ensure that the
replacement or alternate tires and wheels
allow the TPMS to continue to function
properly.
As an added safety feature, your vehicle
has been equipped with a Tire Pressure
Monitoring System (TPMS) that
illuminates a low tire pressure telltale
when one or more of your tires is
significantly under-inflated. Accordingly,
when the low tire pressure telltale
illuminates, you should stop and check
your tires as soon as possible, and inflate
225
Fiesta (CCT)
Wheels and Tires
Understanding Your Tire Pressure
Monitoring System
The tire pressure monitoring system
complies with part 15 of the FCC rules and
with RSS-210 of Industry Canada.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) This device
must accept any interference received,
including interference that may cause
undesired operation.
The tire pressure monitoring system
measures pressure in your four road tires
and sends the tire pressure readings to
your vehicle. The low tire pressure warning
light will turn on if the tire pressure is
significantly low. Once the light is
illuminated, your tires are under-inflated
and need to be inflated to the
manufacturer’s recommended tire
pressure. Even if the light turns on and a
short time later turns off, your tire pressure
still needs to be checked.
Changing Tires With a Tire
Pressure Monitoring System
When Your Temporary Spare Tire is
Installed
When one of your road tires needs to be
replaced with the temporary spare, the
system will continue to identify an issue to
remind you that the damaged road wheel
and tire assembly needs to be repaired and
put back on your vehicle.
E142549
To restore the full function of the tire
pressure monitoring system, have the
damaged road wheel and tire assembly
repaired and remounted on your vehicle.
Note: Each road tire is equipped with a tire
pressure sensor located inside the wheel
and tire assembly cavity. The pressure
sensor is attached to the valve stem. The
pressure sensor is covered by the tire and is
not visible unless the tire is removed. Take
care when changing the tire to avoid
damaging the sensor
When You Believe Your System is Not
Operating Properly
The main function of the tire pressure
monitoring system is to warn you when
your tires need air. It can also warn you in
the event the system is no longer capable
of functioning as intended. See the
following chart for information concerning
your tire pressure monitoring system:
You should always have your tires serviced
by an authorized dealer.
Check the tire pressure periodically (at
least monthly) using an accurate tire
gauge. See Inflating Your Tires in this
chapter.
226
Fiesta (CCT)
Wheels and Tires
Low tire pressure
warning light
Possible cause
Customer action required
Solid warning light
Tire(s) under-inflated
1. Make sure tires are at the proper pressure. See Inflating your tires in this
chapter. 2. After inflating your tires to the
manufacturer’s recommended pressure
as shown on the Tire Label (located on
the edge of driver’s door or the B-Pillar),
the vehicle must be driven for at least
two minutes over 20 mph (32 km/h)
before the light turns off.
Spare tire in use
Repair the damaged road wheel and tire
assembly and reinstall it on the vehicle
to restore system function. For a
description on how the system functions,
see When your temporary spare tire
is installed in this section.
TPMS malfunction
If the tires are properly inflated and the
spare tire is not in use but the light
remains on, contact your authorized
dealer as soon as possible.
Spare tire in use
Repair the damaged road wheel and tire
assembly and reinstall it on the vehicle
to restore system function. For a
description on how the system functions,
see When your temporary spare tire
is installed in this section.
TPMS malfunction
If the tires are properly inflated and the
spare tire is not in use but the light
remains on, contact your authorized
dealer as soon as possible.
Flashing warning
light
It may take up to two minutes of driving
over 20 mph (32 km/h) for the light to turn
off after you have filled your tires to the
recommended inflation pressure
When Inflating Your Tires
When putting air into your tires (such as at
a gas station or in your garage), the tire
pressure monitoring system may not
respond immediately to the air added to
your tires.
227
Fiesta (CCT)
Wheels and Tires
How Temperature Affects Your Tire
Pressure
Note: The tire pressure monitoring system
indicator light will illuminate when the spare
tire is in use. To restore the full functionality
of the monitoring system, all road wheels
equipped with tire pressure monitoring
sensors must be mounted on the vehicle.
The tire pressure monitoring system
monitors tire pressure in each pneumatic
tire. While driving in a normal manner, a
typical passenger tire inflation pressure
may increase about 2 to 4 psi (14 to 28
kPa) from a cold start situation. If the
vehicle is stationary overnight with the
outside temperature significantly lower
than the daytime temperature, the tire
pressure may decrease about 3 psi (21
kPa) for a drop of 30°F (17°C) in ambient
temperature. This lower pressure value
may be detected by the tire pressure
monitoring system as being significantly
lower than the recommended inflation
pressure and activate the system warning
light for low tire pressure. If the low tire
pressure warning light is on, visually check
each tire to verify that no tire is flat. If one
or more tires are flat, repair as necessary.
Check the air pressure in the road tires. If
any tire is under-inflated, carefully drive
the vehicle to the nearest location where
air can be added to the tires. Inflate all the
tires to the recommended inflation
pressure.
If you get a flat tire while driving, do not
apply the brake heavily. Instead, gradually
decrease your speed. Hold the steering
wheel firmly and slowly move to a safe
place on the side of the road.
Have a flat serviced by an authorized
dealer in order to prevent damage to the
tire pressure monitoring system sensors.
See Tire Pressure Monitoring System
(page 225). Replace the spare tire with a
road tire as soon as possible. During
repairing or replacing of the flat tire, have
an authorized dealer inspect the tire
pressure monitoring system sensor for
damage.
Dissimilar Spare Wheel and Tire
Assembly Information
WARNING
Failure to follow these guidelines
could result in an increased risk of
loss of vehicle control, injury or death.
CHANGING A ROAD WHEEL
If you have a dissimilar spare wheel and
tire, then it is intended for temporary use
only. This means that if you need to use it,
you should replace it as soon as possible
with a road wheel and tire assembly that
is the same size and type as the road tires
and wheels that were originally provided
by Ford. If the dissimilar spare tire or wheel
is damaged, it should be replaced rather
than repaired.
WARNINGS
The use of tire sealants may damage
your tire pressure monitoring system
and should not be used. However, if
you must use a sealant, the tire pressure
monitoring system sensor and valve stem
on the wheel must be replaced by an
authorized Ford dealer.
See Tire Pressure Monitoring
System (page 225). If the tire
pressure monitor sensor becomes
damaged, it will no longer function.
A dissimilar spare wheel and tire assembly
is defined as a spare wheel and tire
assembly that is different in brand, size or
appearance from the road tires and wheels
and can be one of three types:
228
Fiesta (CCT)
Wheels and Tires
1. T-type mini-spare: This spare tire
begins with the letter T for tire size and
may have Temporary Use Only molded in
the sidewall.
The usage of a full-size dissimilar spare
wheel and tire assembly can lead to
impairment of the following:
• Handling, stability and braking
performance.
• Comfort and noise.
• Ground clearance and parking at curbs.
• Winter weather driving capability.
• Wet weather driving capability.
• All-wheel driving capability
2. Full-size dissimilar spare with label
on wheel: This spare tire has a label on
the wheel that states: THIS WHEEL AND
TIRE ASSEMBLY FOR TEMPORARY USE
ONLY.
When driving with one of the dissimilar
spare tires listed above, do not:
•
•
•
•
•
•
Exceed 50 mph (80 km/h)
Load the vehicle beyond maximum
vehicle load rating listed on the Safety
Compliance Label.
Tow a trailer.
Use more than one dissimilar spare tire
at a time.
Use commercial car washing
equipment.
Try to repair the dissimilar spare tire.
When driving with the full-size dissimilar
spare wheel and tire assembly additional
caution should be given to:
• Towing a trailer.
• Driving vehicles equipped with a
camper body.
• Driving vehicles with a load on the
cargo rack.
Drive cautiously when using a full-size
dissimilar spare wheel and tire assembly
and seek service as soon as possible.
Use of one of the dissimilar spare tires
listed above at any one wheel location can
lead to impairment of the following:
• Handling, stability and braking
performance.
• Comfort and noise.
• Ground clearance and parking at curbs.
• Winter weather driving capability.
• Wet weather driving capability.
• All-wheel driving capability (if
applicable).
Tire Change Procedure
WARNINGS
When one of the front wheels is off
the ground, the transmission alone
will not prevent the vehicle from
moving or slipping off the jack, even if the
transmission selector lever is in position P.
To help prevent your vehicle from
moving when you change a tire, be
sure to place the transmission
selector lever in position P, set the parking
brake and block (in both directions) the
wheel that is diagonally opposite (other
side and end of the vehicle) to the tire
being changed.
3. Full-size dissimilar spare without
label on wheel
When driving with the full-size dissimilar
spare wheel and tire assembly, do not:
• Exceed 70 mph (113 km/h).
• Use more than one dissimilar spare
wheel and tire assembly at a time.
• Use commercial car washing
equipment.
Never get underneath a vehicle that
is supported only by a jack. If your
vehicle slips off the jack, you or
someone else could be seriously injured.
229
Fiesta (CCT)
Wheels and Tires
WARNINGS
Do not attempt to change a tire on
the side of the vehicle close to
moving traffic. Pull far enough off the
road to avoid the danger of being hit when
operating the jack or changing the wheel.
Always use the jack provided as
original equipment with your vehicle.
If using a jack other than the one
provided as original equipment with your
vehicle, make sure the jack capacity is
adequate for the vehicle weight, including
any vehicle cargo or modifications.
E142550
6. Remove the lug wrench and jack from
the foam holder.
Make sure there is no lubrication
(grease or oil) on the threads or the
surface between the wheel lugs and
nuts. This can cause the lug nuts to loosen
while driving.
Note: Passengers should not remain in the
vehicle when the vehicle is being jacked.
1.
2.
3.
4.
5.
Park on a level surface, set the parking
brake and activate the hazard flashers.
Place the transmission selector lever
in position P (automatic transmission)
or position R (manual transmission)
and turn the engine off.
Remove the carpeted wheel cover.
Remove the spare tire bolt securing the
spare tire by turning it
counterclockwise.
Remove the spare tire from the spare
tire compartment.
E142551
7. Block the diagonally opposite wheel.
8. Loosen each wheel lug nut one-half
turn counterclockwise but do not
remove them until the wheel is raised
off the ground.
Note: Jack at the specified locations to
avoid damage to the vehicle.
9. The vehicle jacking points are shown
here, and are depicted on the yellow
warning label on the jack.
E145908
230
Fiesta (CCT)
Wheels and Tires
10.
Indentations in the sills show the
location of the jacking points.
14.
Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page
232).
Stowing the flat tire
The full-size road wheel can be stowed in
the spare tire compartment.
1.
Lift the carpeted wheel cover at an
angle to access the spare tire
compartment.
2. Place the wheel in the spare tire well
with the valve stem facing down. Use
the mini-spare bolt to secure the wheel
through one of the lug holes.
3. Place the jack, tools and foam block
back into the spare tire compartment.
4. Replace the carpeted wheel cover.
E142553
11.
Remove the lug nuts with the lug
wrench.
Replace the flat tire with the spare
tire, making sure the valve stem is
facing outward. Reinstall the lug nuts
until the wheel is snug against the
hub. Do not fully tighten the lug nuts
until the wheel has been lowered.
Lower the wheel by turning the jack
handle counterclockwise.
12.
13.
3
1
2
E146026
4
E90589
231
Fiesta (CCT)
Wheels and Tires
TECHNICAL SPECIFICATIONS
Wheel Lug Nut Torque Specifications
WARNING
When a wheel is installed, always remove any corrosion, dirt or foreign materials
present on the mounting surfaces of the wheel or the surface of the wheel hub,
brake drum or brake disc that contacts the wheel. Make sure that any fasteners
that attach the rotor to the hub are secured so they do not interfere with the mounting
surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the
wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off
while your vehicle is in motion, resulting in loss of control.
Bolt size
Ib-ft (Nm)
M12 x 1.5
100 (135)
*
*
Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford
recommended replacement fasteners.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any
wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
E145950
A
Wheel pilot bore
Inspect the wheel pilot bore and
mounting surface prior to installation.
Remove any visible corrosion or loose
particles.
232
Fiesta (CCT)
Capacities and Specifications
ENGINE SPECIFICATIONS
Engine
1.0L EcoBoost
1.6L Duratec-16V TiVCT
1.6L EcoBoost
Cubic inches
Information not available
98
98
Required fuel
Information not available
Minimum 87 octane
Minimum 87 octane
Compression
ratio
Information not available
11:1
10:1
1.6L Duratec-16V Ti-VCT
Drivebelt Routing
1.0L EcoBoost
E163198
1.6L EcoBoost
E163197
E161372
233
Fiesta (CCT)
Capacities and Specifications
MOTORCRAFT PARTS
Component
1.0L EcoBoost
1.6L Duratec-16V TiVCT
Air filter
FA-1914
element
Oil filter
1.6L EcoBoost
1
FL-910S
2
Battery
BXT-96R-500
BXT-96R-590
3
Spark plugs
SP-532
SP-525
Cabin air filter
Windshield
wiper blade
SP-532
FP-69
WW-1613 (driver side)
WW-2430 (passenger side)
1
Failure to use the correct air filter element may result in severe engine damage. Your
warranty may be void for any damage to the engine if the correct air filter element is not
used.
2
Only use the specified replacement oil filter. The use of a non-specified oil filter can
result in engine damage. See Scheduled Maintenance (page 368).
3
For spark plug replacement, see an authorized dealer. Replace the spark plugs at the
appropriate intervals.
Note: Replace the spark plugs with ones that meet Ford material and design specifications
for your vehicle, such as Motorcraft or equivalent replacement parts. Your warranty may
be void for any damage to the engine if the correct spark plugs are not used.
234
Fiesta (CCT)
Capacities and Specifications
VEHICLE IDENTIFICATION
NUMBER
The vehicle identification number is
located on the left-hand side of the
instrument panel.
C
Make, vehicle line, series, body
type
D
Engine type
E
Check digit
F
Model year
G
Assembly plant
H
Production sequence number
VEHICLE CERTIFICATION
LABEL
E142476
Please note that in the graphic, XXXX is
representative of your vehicle identification
number.
The Vehicle Identification Number contains
the following information:
E142478
The National Highway Traffic Safety
Administration Regulations require that a
Safety Compliance Certification Label be
affixed to a vehicle and prescribe where
the Safety Compliance Certification Label
may be located. The Safety Compliance
Certification Label shall be affixed to either
the door hinge pillar, the door latch post,
or the edge of the door near the door latch,
next to the driver's seating position.
E142477
A
World manufacturer identifier
B
Brake system, Gross Vehicle
Weight Rating, Restraint Devices
and their locations
235
Fiesta (CCT)
Capacities and Specifications
The transmission code is on the Safety
Compliance Certification Label. The
following table shows the transmission
code along with the transmission
description.
TRANSMISSION CODE
DESIGNATION
E142806
Description
Code
Six-speed automatic transmission
A
Six-speed manual transmission
M
Five-speed manual transmission
C
236
Fiesta (CCT)
Accessories
Peace of mind
For a complete listing of the accessories
that are available for your vehicle, please
contact your dealer or visit our online store
at: Accessories.Ford.com (U.S. only).
•
•
•
•
•
Ford Custom Accessories are available for
your vehicle through your local Ford or Ford
of Canada dealer. Ford Motor Company
will repair or replace any properly
dealer-installed Ford Custom Accessories
found to be defective in factory-supplied
materials or workmanship during the
warranty period, as well as any component
damaged by the defective accessories. The
accessories will be warranted for
whichever provides you the greatest
benefit:
•
•
*Ford Licensed Accessories (FLA) are
warranted by the accessory
manufacturer's warranty. Ford Licensed
Accessories are fully designed and
developed by the accessory manufacturer
and have not been designed or tested to
Ford Motor Company engineering
requirements. Contact your Ford dealer for
details regarding the manufacturer's
limited warranty and a copy of the FLA
product limited warranty offered by the
accessory manufacturer.
12 months or 12,000 miles (20,000
km) (whichever occurs first), or
the remainder of your new vehicle
limited warranty.
Contact your dealer for details and a copy
of the warranty.
For maximum vehicle performance, keep
the following information in mind when
adding accessories or equipment to your
vehicle:
Exterior style
•
•
•
•
•
•
•
Graphics kit
Hood deflectors
Side window deflectors
Splash guards
Rear spoiler
Wheels
Bumper protectors
•
•
Interior style
•
•
•
•
All-weather floor mats
Rear seat entertainment*
Premium carpeted floor mats
Lighted door sill plates
Lifestyle
•
•
Ash cup / smoker's packages
Roof racks and carriers*
237
Fiesta (CCT)
Remote start
Vehicle security systems
Wheel locks
Bumper-mounted parking sensor*
Locking fuel plug for capless fuel
system
When adding accessories, equipment,
passengers and luggage to your
vehicle, do not exceed the total weight
capacity of the vehicle or of the front
or rear axle (GVWR or GAWR as
indicated on the Safety Compliance
Certification label). Consult your
authorized dealer for specific weight
information.
The Federal Communications
Commission (FCC) and Canadian
Radio Telecommunications
Commission (CRTC) regulate the use
of mobile communications systems —
such as two-way radios, telephones
and theft alarms - that are equipped
with radio transmitters. Any such
equipment installed in your vehicle
should comply with FCC or CRTC
regulations and should be installed
only by a qualified service technician.
Accessories
•
•
•
Mobile communications systems may
harm the operation of your vehicle,
particularly if they are not properly
designed for automotive use.
To avoid interference with other vehicle
functions, such as anti-lock braking
systems, amateur radio users who
install radios and antennas onto their
vehicle should not locate the amateur
radio antennas in the area of the
driver's side hood.
Any non-Ford custom electrical or
electronic accessories or components
that are added to the vehicle by the
authorized dealer or the owner, may
adversely affect battery performance
and durability, and may also adversely
affect the performance of other
electrical systems in the vehicle.
238
Fiesta (CCT)
Ford Extended Service Plan (ESP)
PROTECT YOURSELF FROM THE RISING
COST OF VEHICLE REPAIRS WITH A FORD
EXTENDED SERVICE PLAN.
That means you get:
• Reliable, quality service anywhere you
go
• Repairs performed by factory trained
technicians, using Genuine Ford and
Lincoln parts
SERVICE PLANS (U.S. Only)
More than 32 million Ford and Lincoln
owners have discovered the powerful
protection of Ford Extended Service Plan.
It is the only extended service plan backed
by Ford Motor Company, and provides
peace of mind protection beyond the New
Vehicle Limited Warranty coverage.
Rental Car Reimbursement
1st day Rental Benefit
You take advantage of replacement
transportation if your vehicle is at the
dealership for same day covered repairs.
Ford ESP Can Quickly Pay for Itself
One service bill – the cost of parts and
labor – can easily exceed the price of your
Ford Extended Service Plan. With Ford
ESP, you minimize your risk for unexpected
repair bills and rising repair costs.
Extended Rental Benefits
Up to 500+ Covered Vehicle
Components
Roadside Assistance
If your vehicle is kept overnight for covered
repairs, you are eligible for rental car
coverage, including Bumper to Bumper
warranty repairs, or Field Service Actions.
Exclusive 24/7 roadside assistance,
including:
There are four Extended Service Plans with
different levels of coverage. Ask your
dealer for details.
•
1.
PremiumCARE - Our most
comprehensive coverage. With over
500 covered components, this plan is
so complete that we generally only
discuss what’s not covered.
2. ExtraCARE - Covers 113 components,
and includes many high-tech items.
3. BaseCARE - Covers 84 components.
4. PowertrainCARE - Covers 29 critical
components.
•
•
•
Transferable Coverage
If you sell your vehicle before your Ford
Extended Service Plan coverage expires,
you can transfer any remaining coverage
to the new owner. Whenever you sell your
vehicle, prospective buyers may have a
higher degree of confidence that vehicle
was properly maintained with Ford ESP,
thereby improving resale value.
Ford Extended Service Plan is honored by
all Ford and Lincoln Dealers in the U.S. and
Canada. It is the only extended service plan
authorized and backed by Ford Motor
Company.
239
Fiesta (CCT)
Towing, flat-tire change and battery
jump starts
Out of fuel and lock-out assistance
Travel expense reimbursement for
lodging, meals and rental car
Destination assistance for taxi, shuttle,
rental car coverage and emergency
transportation
Ford Extended Service Plan (ESP)
Avoid the Rising Cost of Properly
Maintaining Your Vehicle!
Contact your selling Ford or Lincoln
dealership today so they can customize a
Ford Extended Service Plan that fits your
driving lifestyle and budget.
Ford Extended Service Plan also offers a
Premium Maintenance Plan that covers all
scheduled maintenance, and select items
that routinely wear out.
Interest Free Finance Options
Available
The coverage is prepaid, so you never have
to worry about affording your vehicle
maintenance. It covers regular checkups,
routine inspections, preventive care and
replacement of select items that require
periodic attention for normal wear:
•
•
•
•
•
•
•
Take advantage of our interest free
installment payment plan. Just a 10%
down payment will provide you with an
affordable, no interest, no fee payment
program.
To learn more, call our Ford ESP specialists
at 800-367-3377. Don’t forget to ask about
our interest free payment program,
allowing you all the security and benefits
Ford ESP has to offer while paying over
time. You are pre-approved with no credit
checks, no hassles!
Windshield Wiper Blades
Spark Plugs (except in California)
The Clutch Disc
Brake Pads and Linings
Shock Absorbers
Belts and Hoses
Diesel Exhaust Fluid Replenishment
Complete the information below and mail
to:
Ford ESP
P.O. Box 8072
Royal Oak, MI 48068-0039
Name (PLEASE PRINT)
ADDRESS
APT.#
CITY
STATE
ZIP
E-MAIL
240
Fiesta (CCT)
Ford Extended Service Plan (ESP)
SERVICE PLANS (CANADA ONLY)
You can get more protection for your
vehicle by purchasing a Ford Extended
Service Plan. Ford Extended Service Plan
is the only service contract backed by Ford
Motor Company of Canada, Limited.
Depending on the plan you purchase, Ford
Extended Service Plan provides benefits
such as:
•
•
•
•
Rental reimbursement
Coverage for certain maintenance and
wear items
Protection against repair costs after
your New Vehicle Limited Warranty
Coverage expires
Roadside Assistance benefits
There are several Ford Extended Service
Plans available in various time, distance
and deductible combinations. Each plan
is tailored to fit your own driving needs,
including reimbursement for towing and
rental.
When you purchase Ford Extended Service
Plan, you receive added peace-of-mind
protection throughout Canada and the
United States, provided by a network of
participating Ford Motor Company dealers.
The Lincoln Maintenance Protection Plan
is honored at authorized Lincoln dealers.
Note: Repairs performed outside of Canada
and the United States are not eligible for
Ford Extended Service Plan coverage.
This information is subject to change.
For more information, visit your local Ford
of Canada dealer or www.ford.ca to find
the Ford Extended Service Plan that is right
for you.
241
Fiesta (CCT)
Audio System
GENERAL INFORMATION
Radio Frequencies and Reception Factors
Radio reception factors
Distance and Strength
The further you travel away from an FM station, the weaker
the signal and the weaker the reception.
Terrain
Hills, mountains, tall buildings, bridges, tunnels, freeway
overpasses, parking garages, dense tree foliage and
thunderstorms can interfere with the reception.
Station overload
When you pass near a radio transmission tower, a stronger
signal can override a weaker signal and can cause interference in the audio system.
MP3 and WMA Track and Folder
Structure
CD and CD Player Information
Note: CD units play commercially pressed
4.75-inch (12 centimeter) audio compact
discs only. Due to technical incompatibility,
certain recordable and re-recordable
compact discs may not function correctly
when used in Ford CD players.
Audio systems capable of recognizing and
playing MP3 and WMA individual tracks
and folder structures work as follows:
• There are two different modes for MP3
and WMA disc playback: MP3 and
WMA track mode (system default) and
MP3 and WMA folder mode.
• MP3 and WMA track mode ignores any
folder structure on the MP3 and WMA
disc. The player numbers each MP3
and WMA track on the disc (noted by
the .mp3 or .WMA file extension) from
T001 to a maximum of T255. The
maximum number of playable MP3 and
WMA files may be less depending on
the structure of the CD and exact
model of radio present.
Note: Do not insert CDs with homemade
paper (adhesive) labels into the CD player
as the label may peel and cause the CD to
become jammed. You should use a
permanent felt tip marker rather than
adhesive labels on your homemade CDs.
Ballpoint pens may damage CDs. Please
contact an authorized dealer for further
information.
Note: Do not use any irregularly shaped
discs or discs with a scratch protection film
attached.
Always handle discs by their edges only.
Clean the disc with an approved CD
cleaner only. Wipe it from the center of the
disc toward the edge. Do not clean in a
circular motion.
Do not expose discs to direct sunlight or
heat sources for extended periods.
242
Fiesta (CCT)
Audio System
•
•
MP3 and WMA folder mode represents
a folder structure consisting of one
level of folders. The CD player numbers
all MP3 and WMA tracks on the disc
(noted by the .mp3 or .WMA file
extension) and all folders containing
MP3 and WMA files, from F001 (folder)
T001 (track) to F253 T255.
Creating discs with only one level of
folders helps with navigation through
the disc files.
In track mode, the system displays and
plays the structure as if it were only one
level deep (all .mp3 files play, regardless
of being in a specific folder). In folder
mode, the system only plays the .mp3 files
in the current folder.
AUDIO UNIT - VEHICLES WITH:
AM/FM/CD
WARNING
If you are burning your own MP3 and WMA
discs, it is important to understand how
the system reads the structures you create.
While various files may be present, (files
with extensions other than mp3 and
WMA), only files with the .mp3 and WMA
extension are played; other files are
ignored by the system. This enables you to
use the same MP3 and WMA disc for a
variety of tasks on your work computer,
home computer and your in-vehicle
system.
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
243
Fiesta (CCT)
Audio System
A
B
D
C
E
F
O
N
M
L
G
K
J
I
H
E156613
A
Eject: Press the button to eject a CD.
B
Cursor arrows: Press a button to scroll through on-screen choices.
C
CD slot: Where you insert a CD.
D
OK: Press the button to confirm on-screen selections.
E
Clock: Press to set the time. Use the H and M buttons outside the audio display
to adjust the hours and minutes. Press OK to finish. (The clock can also be set
by pressing MENU, then scrolling to the clock settings menu.)
F
Tune: Press the button to manual tune on AM and FM wavebands.
G
Numeric keypad: Press the button to recall a previously stored station. To
store a favorite station press and hold until the sound returns.
H
Seek up: Press the button to go to the next station up the radio frequency band
or the next track on a CD.
I
On, Off and Volume: Press the button to switch the audio system on or off.
Turn the dial to adjust the volume.
244
Fiesta (CCT)
Audio System
J
Seek down: Press the button to go to the next station down the radio frequency
band or the previous track on a CD.
K
MENU: Press the button to access different audio system features.
L
INFO: Press the button to access radio or CD information.
M
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade.
N
MEDIA: Press the button to access the AUX and SYNC features, it will also
cancel the menu or list browsing.
O
RADIO: Press the button to select different radio bands, it will also cancel the
menu or list browsing.
Station Tuning Control
Sound Button
Seek Tuning
This will allow you to adjust the sound
settings (for example bass, middle and
treble).
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
1. Press the SOUND button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
Manual Tuning
1. Press the MENU button.
2. Select RADIO mode and then Manual.
3. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
4. Press OK to continue listening to a
station.
Waveband Button
Press the RADIO button to select from the
wavebands available.
You can use the selector to return to radio
reception when you have been listening to
another source.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.
1.
Press the MENU button.
2. Select RADIO mode and then Scan.
3. Use the seek buttons to scan up or
down the selected waveband.
4. Press OK to continue listening to a
station.
245
Fiesta (CCT)
Audio System
Station Preset Buttons
3. Use the left or right arrow button to
adjust the setting.
4. Press the OK button to confirm your
selection.
5. Press the MENU button to return.
This feature allows you to store your
favorite stations, they can be recalled by
selecting the appropriate waveband and
pressing one of the preset buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
News Broadcasts
Your audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband, radio data
system or other enhanced network linked
stations.
The display will indicate there is an
incoming announcement during news
broadcasts. When the audio unit interrupts
for a news broadcast the preset volume
level will be the same as traffic
announcements.
You can repeat this on each waveband and
for each preset button.
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
1.
Press the MENU button.
2. Select Audio Settings.
3. Scroll to News and turn on or off with
the OK button.
4. Press the MENU button to return.
Autostore Control
Note: This will store up to a maximum of
the six strongest signals available, either
from the AM or the FM waveband and
overwrite the previously stored stations. You
can also store stations manually in the same
way as other wavebands.
•
•
Alternative Frequencies
The majority of programs that broadcast
on the FM waveband have a program
identification code that can be recognized
by audio units.
Press and hold the RADIO button.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function will search for the
strongest station signal.
Automatic Volume Control
Under certain conditions, alternative
frequencies tuning may temporarily disrupt
normal reception.
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
1.
Press the MENU button and select
Audio Settings.
2. Select Spd. Comp. Vol.
246
Fiesta (CCT)
Audio System
When selected, the unit continually
evaluates signal strength and if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and if necessary, it will search once across
the selected waveband for a genuine
alternative frequency.
Regional mode OFF: This allows a larger
coverage area if neighboring regional
networks are carrying the same
programming, but can cause random
alternative frequency switches if they are
not.
1. Press the MENU button.
2. Select Audio Settings.
3. Scroll to RDS regional and turn on or
off with the OK button.
4. Press the MENU button to return.
It will restore radio reception when it finds
one or if one is not found, the unit will
return to the original stored frequency.
When selected, AF will be shown in the
display.
AUDIO UNIT - VEHICLES WITH:
AM/FM/CD/SYNC
1. Press the MENU button.
2. Select Audio Settings.
3. Scroll to Alternat. freq. or Alt.
Frequency and turn on or off with the
OK button.
4. Press the MENU button to return.
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
Regional Mode
Regional mode controls the behavior of
alternative frequencies switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a fairly
large network across a large part of the
country. At various times of the day this
large network may be broken down into a
number of smaller regional networks,
typically centered on major towns or cities.
When the network is not split into regional
variants, the whole network carries the
same programming.
Note: An integrated multi function display
is situated above the unit. This shows
important information regarding control of
your system. Additionally, there are various
icons placed around the display screen
which light up when a function is active (for
example CD, Radio or Aux).
Regional mode ON: This prevents random
alternative frequency switches when
neighboring regional networks are not
carrying the same programming.
247
Fiesta (CCT)
Audio System
A
B
D
C
E
T
F
S
G
R
Q
H
P
O
N
M
L
K
J
I
E156629
A
Eject: Press the button to eject a CD.
B
Cursor arrows: Press a button to scroll through on-screen choices.
C
CD slot: Where you insert a CD.
D
OK: Press the button to confirm on-screen selections.
E
INFO: Press the button to access radio, CD, USB and IPod information.
F
TUNE -: Press the button to manual tune down the waveband.
G
TUNE +: Press the button to manual tune up the waveband.
H
Numeric keypad: Press the button to recall a previously stored station. To
store a favorite station press and hold until the sound returns.
I
Function button 4: Press the button to select different functions of the audio
system depending on which mode (i.e. radio or CD) you are in.
J
Function button 3: Press the button to select different functions of the audio
system depending on which mode (i.e. radio or CD) you are in.
248
Fiesta (CCT)
Audio System
K
Seek up: Press the button to go to the next station up the radio frequency band
or the next track on a CD.
L
On, Off and Volume: Press the button to switch the audio system on or off.
Turn the dial to adjust the volume.
M
Seek down: Press the button to go to the next station down the radio frequency
band or the previous track on a CD.
N
Function button 2: Press the button to select different functions of the audio
system depending on which mode (i.e. radio or CD) you are in.
O
Function button 1: Press the button to select different functions of the audio
system depending on which mode (i.e. radio or CD) you are in.
P
MENU: Press the button to access different audio system features.
Q
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade.
R
PHONE: Press the button to access the phone feature of the SYNC system by
pressing PHONE then MENU. See separate manual.
S
MEDIA: Press the button to access the AUX and SYNC features, it will also
cancel the menu or list browsing.
T
RADIO: Press the button to select different radio bands, it will also cancel the
menu or list browsing.
Function buttons 1 to 4 are context
dependent, and change according to the
current unit mode. The description for the
current function displays in the screen.
Sound Button
This will allow you to adjust the sound
settings (for example bass, middle and
treble).
1
E104157
A
2
3
1. Press the SOUND button.
2. Use the up and down arrow buttons to
select the required setting.
3. Use the left and right arrow buttons to
make the necessary adjustment. The
display indicates the level selected.
4. Press the OK button to confirm the
new settings.
4
A
Descriptions for function buttons
1-4
249
Fiesta (CCT)
Audio System
Waveband Button
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
Press the RADIO button to select from the
wavebands available.
You can use the selector to return to radio
reception when you have been listening to
another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.
You can repeat this on each waveband and
for each preset button.
Station Tuning Control
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies, and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Seek Tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Autostore Control
Manual Tuning
Note: This will store up to a maximum of
the 10 strongest signals available, either
from the AM or the FM waveband, and
overwrite the previously stored stations. You
can also store stations manually in the same
way as other wavebands.
1. Press function button 2.
2. Use the left and right arrow buttons to
tune down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
3. Press OK to continue listening to a
station.
•
•
Scan Tuning
Automatic Volume Control
Scan allows you to listen to a few seconds
of each station detected.
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
1. Press function button 3.
2. Use the seek buttons to scan up or
down the selected waveband.
3. Press function button 3 again or OK
to continue listening to a station.
1.
2.
3.
Station Preset Buttons
4.
This feature allows you to store your
favorite stations, they can be recalled by
selecting the appropriate waveband and
pressing one of the preset buttons.
5.
250
Fiesta (CCT)
Press and hold the RADIO button.
When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
Press the MENU button and
selectAudio Settings.
Select Spd. Comp. Vol.
Use the left or right arrow button to
adjust the setting.
Press the OK button to confirm your
selection.
Press the MENU button to return.
Audio System
News Broadcasts
When selected, AF will be shown in the
display.
Your audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM waveband, radio data
system or other enhanced network linked
stations.
1. Press the MENU button.
2. Select Audio Settings.
3. Scroll to Alternat. freq. or Alt.
Frequency. and turn on or off with the
OK button.
4. Press the MENU button to return.
The display will indicate there is an
incoming announcement, during news
broadcasts. When the audio unit interrupts
for a news broadcast the preset volume
level will be the same as traffic
announcements.
Regional Mode
Regional mode controls the behavior of
alternative frequencies switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a fairly
large network across a large part of the
country. At various times of the day this
large network may be broken down into a
number of smaller regional networks,
typically centered on major towns or cities.
When the network is not split into regional
variants, the whole network carries the
same programming.
1. Press the MENU button.
2. Select Audio Settings.
3. Scroll to News and turn on or off with
the OK button.
4. Press the MENU button to return.
Alternative Frequencies
The majority of programs that broadcast
on the FM waveband have a program
identification code, it can be recognized by
audio units.
Regional mode ON: This prevents random
alternative frequency switches when
neighboring regional networks are not
carrying the same programming.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function will search for the
strongest station signal.
Regional mode OFF: This allows a larger
coverage area if neighboring regional
networks are carrying the same
programming, but can cause random
alternative frequency switches if they are
not.
Under certain conditions, alternative
frequencies tuning may temporarily disrupt
normal reception.
1. Press the MENU button.
2. Select Audio Settings.
3. Scroll to RDS regional and turn on or
off with the OK button.
4. Press the MENU button to return.
When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and if necessary, it will search once across
the selected waveband for a genuine
alternative frequency.
It will restore radio reception when it finds
one or if one is not found, the unit will
return to the original stored frequency.
251
Fiesta (CCT)
Audio System
Note: The MyFord Touch® system controls
most of the audio features. See MyFord
Touch™ (page 293).
AUDIO UNIT - VEHICLES WITH:
TOUCHSCREEN DISPLAY
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
E143843
A
Tune: Press these buttons when in radio mode to manually search up or down
through the radio frequency band. In SIRIUS mode, press these buttons to find
the next or previous available satellite radio station.
B
On, Off and Volume: Press the button to switch the audio system on or off.
Turn the dial to adjust the volume.
C
Eject: Press the button to eject a CD.
252
Fiesta (CCT)
Audio System
D
SEEK Press these buttons when you are in radio mode to go to the next station
up or down the radio frequency band, or to go to the next or previous track on
a CD. In SIRIUS mode, press these buttons to select the next or previous channel.
If a specific category is selected (for example Jazz, Rock or News), use these
buttons to find the next or previous channel in the selected category.
E
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade.
F
SOURCE: Press the button to access different audio modes, such as AM, FM
and A/V input.
Note: The MyFord Touch® system controls
most of the audio features. See MyFord
Touch™ (page 293).
AUDIO UNIT - VEHICLES WITH:
SONY AUDIO
SYSTEM/TOUCHSCREEN
DISPLAY
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
253
Fiesta (CCT)
Audio System
A
J
B
D
C
I
H
E
G
F
E156663
A
On, Off: Press the button to switch the audio system on or off.
B
CD Slot Where you insert a CD.
C
TUNE +: In radio mode, press this button to manually search forward through
the radio frequency band. In SIRIUS mode, press this button to find the next
available satellite radio station.
D
Seek up In radio mode, press this button to go to the next station up the radio
frequency band. Press to go to the next track on a CD. In SIRIUS mode, press
this button to select the next channel. If a specific category is selected (for
example Jazz, Rock or News), use this button to find the next channel in the
selected category.
E
Eject: Press the button to eject a CD.
F
SOUND: Press the button to adjust the sound settings for bass, treble, middle,
balance and fade.
G
Volume Turn the dial to adjust the volume.
254
Fiesta (CCT)
Audio System
H
TUNE -: In radio mode, press this button to manually search backward through
the radio frequency band. In SIRIUS mode, press this button to find the previous
available satellite radio station.
I
Seek down In radio mode, press this button to go to the next station down the
radio frequency band. Press to go to the previous track on a CD. In SIRIUS mode,
press this button to select the previous channel. If a specific category is selected
(for example Jazz, Rock or News), use this button to find the previous channel
in the selected category.
J
SOURCE: Press the button to access different audio modes, such as AM, FM
and A/V input.
AUXILIARY INPUT JACK
WARNINGS
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
E149149
The auxiliary input jack allows you to
connect and play music from your portable
music player through your vehicle speakers.
You can use any portable music player
designed for use with headphones. Your
audio extension cable must have male
1/8th-inch (3.5 millimeter) connectors at
each end.
For safety reasons, do not connect
or adjust the settings on your
portable music player while your
vehicle is moving.
1.
Switch off the engine, radio and
portable music player. Set the parking
brake and put the transmission in
position P (vehicle with an automatic
transmission) or neutral (vehicle with
a manual transmission).
2. Plug the extension cable from the
portable music player into the auxiliary
input jack.
3. Switch the radio on. Select either a
tuned FM station or a CD.
4. Adjust the volume as desired.
Store the portable music player in a
secure location, such as the center
console or the glove box, when your
vehicle is moving. Hard objects may
become projectiles in a collision or sudden
stop, which may increase the risk of serious
injury. The audio extension cable must be
long enough to allow the portable music
player to be safely stored while your
vehicle is moving.
255
Fiesta (CCT)
Audio System
7.
5. Switch your portable music player on
and adjust its volume to half its
maximum level.
6. Press AUX until LINE or LINE IN
appears in the display. You should hear
music from your device even if it is low.
Adjust the volume on your portable
music player until it reaches the volume
level of the FM station or CD. Do this
by switching back and forth between
the AUX and FM or CD controls.
AUDIO TROUBLESHOOTING
Audio unit display
Rectification
PLEASE CHECK CD
General error message for CD fault conditions, such as
cannot read the CD, data-CD inserted, etc. Make sure
the disc is loaded correct way up. Clean and re-try, or
replace disc with known music disc. If error persists
contact your dealer.
CD DRIVE MALFUNCTION
General error message for CD fault conditions such as
possible mechanism fault.
CD DRIVE HIGH TEMP
Ambient temperature too hot – unit will not work until
it has cooled down.
256
Fiesta (CCT)
SYNC™
GENERAL INFORMATION
E142598
•
SYNC is an in-vehicle communications
system that works with your
Bluetooth-enabled cellular phone and
portable media player. This allows you to:
• Make and receive calls.
• Access and play music from your
portable music player.
• Use 911 Assist, Vehicle Health Report
and SYNC Services (Traffic, Directions
*
& Information).
•
•
•
•
•
*
These features require activation.
Make sure that you review your device's
manual before using it with SYNC.
Support
The SYNC support team is available to
help you with any questions you cannot
answer on your own.
Use applications, such as Pandora and
Stitcher, via SYNC AppLink.
Access phonebook contacts and music
using voice commands.
Stream music from your connected
phone.
Text message.
Monday-Saturday, 8:30am-8:00pm EST.
In the United States, call 1-888-270-1055.
In Canada, call 1-800-565-3673.
257
Fiesta (CCT)
Use the advanced voice recognition
system
Charge your USB device (if your device
supports this).
SYNC™
Times are subject to change due to
holidays.
When using SYNC:
• Do not operate playing devices if the
power cords or cables are broken, split
or damaged. Place cords and cables
out of the way, so they do not interfere
with the operation of pedals, seats,
compartments or safe driving abilities.
• Do not leave playing devices in your
vehicle during extreme conditions as it
could cause them damage. See your
device's manual for further information.
• Do not attempt to service or repair the
system. See an authorized dealer.
SYNC Owner Account
Why do I need a SYNC owner account?
• Required to activate Vehicle Health
Report and to view the reports online.
• Required to activate the
subscription-based SYNC Services and
to personalize your Saved Points and
Favorites.
• Essential for keeping up with the latest
software downloads available for
SYNC.
• Access to customer support for any
questions you may have.
Privacy Information
When a cellular phone is connected to
SYNC, the system creates a profile within
your vehicle that is linked to that cellular
phone. This profile is created in order to
offer you more cellular features and to
operate more efficiently. Among other
things, this profile may contain data about
your cellular phone book, text messages
(read and unread), and call history,
including history of calls when your cellular
phone was not connected to the system.
In addition, if you connect a media device,
the system creates and retains an index of
supported media content. The system also
records a short development log of
approximately 10 minutes of all recent
system activity. The log profile and other
system data may be used to improve the
system and help diagnose any problems
that may occur.
Driving Restrictions
For your safety, certain features are
speed-dependent and restricted when your
vehicle is traveling over 3 mph (5 km/h).
Safety Information
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
The cellular profile, media device index,
and development log will remain in the
vehicle unless you delete them and are
generally accessible only in the vehicle
when the cellular phone or media player
is connected. If you no longer plan to use
the system or the vehicle, we recommend
you perform a Master Reset to erase all
stored information.
258
Fiesta (CCT)
SYNC™
System data cannot be accessed without
special equipment and access to the
vehicle's SYNC module. Ford Motor
Company and Ford of Canada will not
access the system data for any purpose
other than as described absent consent, a
court order, or where required by law
enforcement, other government
authorities, or other third parties acting
with lawful authority. Other parties may
seek to access the information
independently of Ford Motor Company and
Ford of Canada. For further privacy
information, see the sections on 911 Assist,
Vehicle Health Report, and Traffic,
Directions and Information.
USING VOICE RECOGNITION
This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is in front of you.
Initiating a Voice Session
Push the voice icon. A tone
sounds and Listening appears in
E142599
the display. Say any of the
following:
Say
If You Want To
"Bluetooth audio"
Stream audio from your phone.
"Cancel"
Cancel the requested action.
"Line in"
Access the device connected to the auxiliary input jack.
"Mobile apps"
Access mobile applications.
*
"Phone"
"Services"
Make calls.
Access the SYNC Services portal.
*
"SYNC"
Return to the main menu.
"USB"
"Vehicle health report"
*
Access the device connected to your USB port.
*
Run a vehicle health report.
"Voice settings"
Adjust the level of voice interaction and feedback.
"Help"
Hear a list of voice commands available in the current
mode.
This is an optional feature and available in the United States only.
259
Fiesta (CCT)
SYNC™
System Interaction and Feedback
The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings). You can
customize the voice recognition system to
provide more or less instruction and
feedback.
Adjusting the Interaction Level
E142599
Push the voice icon. Say "Voice
settings" when prompted, then
any of the following:
When you say:
The system:
"Interaction mode standard"
Provides more detailed interaction and
guidance.
"Interaction mode advanced"
Provides less audible interaction and more
tone prompts.
The system defaults to the standard interaction mode.
Confirmation prompts are short questions
the system asks when it is not sure of your
request or when there are multiple possible
responses to your request. For example,
the system may ask "Phone, is that
correct?". If turned off, the system simply
makes a best guess as to what you
requested and may ask you to confirm
settings.
When you say:
The system:
"Confirmation prompts off"
Makes a best guess from the command;
you may still occasionally be asked to
confirm settings.
"Confirmation prompts on"
Clarifies your voice command with a short
question.
For example, say "Say 1 after the tone to
call John Doe at home. Say 2 after the tone
to call Johnny Doe on mobile. Say 3 after
the tone to call Jane Doe at home." You
could also say "Say 1 after the tone to play
John Doe, Say 2 after the tone to play
Johnny Doe."
The system creates candidate lists when
it has the same confidence level of several
options based on your voice command.
When turned on, it may prompt you with
as many as four possibilities for
clarification.
260
Fiesta (CCT)
SYNC™
When you say:
The system:
"Media candidate lists off"
Makes a best guess from the media
candidate list. You may still occasionally
be asked questions.
"Media candidate lists on"
Clarifies your voice command for media
candidates.
"Phone candidate lists off"
Makes a best guess from the phone
candidate list. You may still occasionally
be asked questions.
"Phone candidate lists on"
Clarifies your voice command for phone
candidates
Helpful Hints
•
•
•
•
USING SYNC™ WITH YOUR
PHONE
Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken commands.
After pressing the voice icon, wait until
after the tone sounds and Listening
appears before saying a command. Any
command spoken before this does not
register with the system.
Speak naturally, without long pauses
between words.
At any time, you can interrupt the
system while it is speaking by pressing
the voice icon.
Hands-free calling is one of the main
features of SYNC. While the system
supports a variety of features, many are
dependent on your cellular phone's
functionality. At a minimum, most cellular
phones with Bluetooth wireless technology
support the following functions:
• Answering an incoming call.
• Ending a call.
• Using privacy mode.
• Dialing a number.
• Redialing.
• Call waiting notification.
• Caller ID.
Other features, such as text messaging
using Bluetooth and automatic phonebook
download, are phone-dependent features.
To check your phone's compatibility, see
your phone's manual and visit
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
261
Fiesta (CCT)
SYNC™
Pairing a Phone for the First Time
1.
Note: SYNC can support downloading up
to approximately 1000 entries per
Bluetooth-enabled cellular phone.
2.
3.
Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position P.
4.
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
5.
Wirelessly pairing your phone with SYNC
allows you to make and receive hands-free
calls.
6.
1.
Press the phone button. When the
display indicates there is no phone
paired, press OK.
2. When Find SYNC appears in the
display, press OK.
3. Put your phone into Bluetooth
discovery mode. See your device's
manual if necessary.
4. When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
The system then prompts with questions,
such as if you would like to set the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and download
your phone book.
Phone Voice Commands
Press the voice icon and say "Phone". Say
any of the following:
"PHONE"
Depending on your phone's capability and
your market, the system may prompt you
with questions, such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and
downloading your phonebook.
"Call <name>"
1,2
"Call <name> at home"
"Call <name> at work"
1,2
1,2
"Call <name> in office"
Pairing Subsequent Phones
1,2
1,2
"Call <name> on mobile OR cell"
Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position P.
"Call <name> on other"
Note: To scroll through the menus, press
the up and down arrows on your audio
system.
1,2
2
"Call history incoming"
2
"Call history missed"
262
Fiesta (CCT)
Press the phone button, and then scroll
to System Settings. Press OK.
Scroll to Bluetooth Devices. Press OK.
Scroll to Add Bluetooth Device. Press
OK.
When Find SYNC appears in the
display, press OK.
Put your phone into Bluetooth
discovery mode. See your phone's
manual if necessary.
When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC in the radio display. The
display indicates when the pairing is
successful.
SYNC™
"PHONE"
"DIAL"
2
"Call history outgoing"
"Connections"
"Dial"
"411 (four-one-one)", "911" (nine-oneone)
2
"700" (seven hundred)
1,3
"800" (eight hundred)
"Go to privacy"
"900" (nine hundred)
"Hold"
"Pound" (#)
"Join"
"Menu"
"Number <0-9>"
2,4
"Phone book <name>"
"Asterisk" (*)
2
"Clear" (deletes all entered digits)
"Delete" (deletes one digit)
2
"Phone book <name> at home"
"Plus"
2
"Phone book <name> at office"
"Phone book <name> at work"
"Star"
2
Note: To exit dial mode, press and hold the
phone button or press MENU to go to the
phone menu.
"Phone book <name> on mobile OR
2
cell"
2
"Phone book <name> on other"
"MENU"
1
This command does not require you to
say "Phone" first.
"(Phone) connections"
"(Phone) settings (message) notification
off"
2
This command is not available until
phone information is completely
downloaded using Bluetooth.
3
See Dial table below.
4
See Menu table below.
"(Phone) settings (message) notification
on"
"(Phone) settings (set) phone ringer"
"(Phone) settings (set) ringer 1"
Phone book commands: When you ask
SYNC to access things such as a
phonebook name or number, the
requested information appears in the
display to view. Press the phone button
and say, "Call" to call the contact.
"(Phone) settings (set) ringer 2"
"(Phone) settings (set) ringer 3"
"(Phone) settings (set) ringer off"
"Battery"
"Phone name"
263
Fiesta (CCT)
SYNC™
Receiving Calls
"MENU"
When receiving a call, you can:
• Answer the call by pressing the phone
button.
• Reject the call by pressing and holding
the phone button.
• Ignore the call by doing nothing.
"Signal"
"Text message inbox"
Words in ( ) are optional and do not have
to be spoken for the system to understand
the command.
Making Calls
Phone Options during an Active
Call
Press the voice icon and when prompted
say:
During an active call, you have more menu
features that become available, such as
putting a call on hold or joining calls. Use
the arrow buttons to scroll through the
menu options.
1.
Say "Call <name>" or "Dial", then the
desired number.
2. When the system confirms the number,
say, "Dial" again to initiate the call.
1. Press MENU during an active call.
2. After selecting Active Call Menu, press
OK.
3. Scroll to cycle through the following
options:
To erase the last spoken digit, say, "Delete"
or press the left arrow button. To erase all
spoken digits, say "Clear" or press and hold
the left arrow button.
To end the call, press and hold the phone
button.
When you select:
You can:
Mute Call?
Mute the call.
Privacy
Switch a call from an active hands-free environment to
your cellular phone for a more private conversation.
Press OK when Privacy on/off appears. (The display
indicates In Privacy and the system transfers your call.)
Call Hold
Put an active call on hold.
Press OK when Hold on/off appears. To answer another
call at this time, press the phone button.
Enter Tones
Enter "tones", such as numbers for passwords.
Scroll until the desired number appears in the display, then
press OK; a tone sounds as confirmation. Repeat as
necessary.
Join Calls
Join two separate calls. (SYNC supports a maximum of
three callers on a multiparty call or conference call.)
1. Press the phone button.
264
Fiesta (CCT)
SYNC™
When you select:
You can:
2. Access the desired contact through SYNC or use voice
commands to place the second call. Once actively in the
second call, press MENU.
3. Scroll to Join Calls, and press OK. Press OK again when
Join Calls? appears.
Phonebook
Access your phonebook contacts.
1. Press OK to select, and then scroll through your phonebook contacts.
2. Press OK again when the desired selection appears in
the display.
3. Press the phone button.
Call History
Access your call history log.
1. Press OK to select, then scroll through your call history
options (incoming, outgoing or missed).
2. Press OK when the desired selection appears in the
display.
3. Press the phone button to call the selection.
Return
Exit the current menu.
1.
Press the phone button to enter the
phone menu.
2. Scroll to cycle through:
Accessing Features through the
Phone Menu
SYNC's phone menu allows you to redial
a number, access your call history and
phonebook and sends text messages as
well as access phone and system settings.
You can also access advanced features,
such as 911 Assist, Vehicle Health Report
and SYNC Services.
When you select:
Phone Redial
Call History
1
You can:
Redial the last number called (if available). Press OK to
select, and then press OK again to confirm.
Access any previously dialed, received or missed calls after
you connect your Bluetooth-enabled phone to SYNC.
1. Press OK to select.
2. Scroll to select from Call History Incoming, Call History
Outgoing or Call History Missed. Press OK to make your
selection.
3. Press OK or the phone button to call the desired selection.
265
Fiesta (CCT)
SYNC™
When you select:
You can:
Note: The system attempts to automatically re-download
your phonebook and call history each time your phone
connects to SYNC (if the auto download feature is on and
your Bluetooth-enabled cellular phone supports this
feature).
Access and call any contacts in your previously downloaded phonebook.
1. Press OK to confirm and enter. If your phonebook has
fewer than 255 listings, they appear alphabetically in flat
file mode. If there are more than 255 entries, the system
organizes them into alphabetical categories.
2. Scroll until the desired contact appears, then press OK.
3. Press OK or the phone button.
1,2
Phonebook
Send, download and delete text messages.
1
Text Message
Phone Settings
View your phone's status, set ring tones, select your
message notification, change phone book entries and
automatically download your cellular phone among other
features.
1
Access the SYNC Services portal where you can request
various types of information, traffic reports and directions.
3
SYNC Services
Place an emergency call to a 911 operator for you after an
accident, when used properly.
4
911 Assist
3
Vehicle Health Report
Create and receive a diagnostic report card on your vehicle.
Mobile Apps
Interact with SYNC-capable mobile applications on your
smartphone.
System Settings
Access Bluetooth Devices menu listings (Add, Connect,
Set as Primary, On and Off, Delete) as well as Advanced
menu listings (prompts, languages, defaults, master reset,
install application and system information).
Exit Phone Menu
Exit the phone menu by pressing OK.
3
1
This is a phone-dependent feature.
2
This is a phone-dependent and speed-dependent feature.
3
This is an optional feature and available in the United States only.
4
This is an optional feature and available in the United States and Canada only.
266
Fiesta (CCT)
SYNC™
Text Messaging
Sending, Downloading and Deleting
Your Text Messages
Note: This is a phone-dependent feature.
Note: Forwarding a text message is a
speed-dependent feature and is only
available when your vehicle is traveling at 3
mph (5 km/h) or less.
SYNC allows you to receive, send,
download and delete text messages. The
system can also read incoming text
messages to you so that you do not have
to take your eyes off the road.
Note: You can only have one recipient per
text message.
Receiving a Text Message
Text messaging is a phone-dependent
feature. If your phone is compatible, SYNC
allows you to receive, send, download and
delete text messages.
Note: This is a phone-dependent feature.
Your phone must support downloading text
messages using Bluetooth to receive
incoming text messages.
1. Press the phone button.
2. Scroll to Text Message, and then press
OK.
When a new message arrives, an audible
tone sounds and the display indicates you
have a new message. You have these
options:
• Press the voice button, wait for the
prompt and say "Read message" to
have SYNC read the message to you.
• Press OK to receive and open the text
message or do nothing and the
message goes into your text message
inbox. Press OK again and SYNC reads
your message aloud as you are not able
to view the message. You can then also
choose to reply or forward the
message.
• Press OK and scroll to choose
between:
• Reply to Text Message: Press OK
to access and then scroll through
the list of pre-defined messages to
send.
• Forward Text Message: Press OK
to forward the message to anyone
in your Phonebook or Call History.
You can also choose Enter Number.
Scroll to select from the following options:
• Send Text Message? allows you to
send a new text message based on a
pre-defined set of 15 messages.
• Download Unread Msgs allows you
to download your unread messages
(only) to SYNC. To download the
messages, press OK to select. The
display indicates that it is downloading
your messages. When it is complete,
SYNC takes you to your inbox.
• Delete All Messages? allows you to
delete current text messages from
SYNC (not your phone). To delete the
messages, press OK to select. The
display indicates when it is finished
deleting all your text messages. SYNC
returns you to the text message menu.
• Return exits the current menu when
you press OK.
If you select Send Text Message?:
1.
Press OK to select. If the system
detects your phone does not support
this feature, Unsupported appears in
the display and SYNC returns to the
main menu.
2. Scroll to cycle through the message
options in the following chart.
267
Fiesta (CCT)
SYNC™
3. Press OK when the desired selection
is in the display.
4. Enter the name of the recipient. Scroll
to cycle through Phonebook or Call
History entries. You can also select
Enter Number to say the desired
number.
5. Press OK to enter the desired menu
and scroll to select the specific
contact.
6. Press OK when the contact appears
and press OK again to confirm when
the system asks if you would like to
send the message. The system sends
each text message with the following
signature: "This message was sent
from my <Ford or Lincoln>".
Pre-defined text message options
No
Why?
Thanks
Where R you?
I need more directions
I love you
Too funny
Can't wait to see you
I'm stuck in traffic
Accessing Your Phone Settings
Pre-defined text message options
These are phone-dependent features. Your
phone settings allow you to access and
adjust features such as your ring tone, text
message notification, modify your
phonebook and set up automatic
download.
Can't talk right now
Call me
Call U later
Be there in 10 minutes
1. Press the phone button.
2. Scroll to Phone Settings, and then
press OK.
3. Scroll to select from the following
options:
Be there in 20 minutes
Yes
When you select:
You can:
Phone Status
See the provider, name, signal power, battery power and
roaming status of your connected phone.
Press OK to select and scroll to view the information.
When done, press OK again to return to the phone status
menu.
Set Ringer
Select which ring tone sounds during an incoming call (one
of the system's or your phone's).
1. Press OK to select and scroll to hear Ringer 1, Ringer 2,
Ringer 3 and Phone Ringer.
2. Press OK to select.
268
Fiesta (CCT)
SYNC™
When you select:
You can:
If your phone supports in-band ringing, your phone's ring
tone plays when you choose Phone Ringer.
Message Notification
Have the option of hearing an audible tone to notify you
when a text message arrives.
1. Press OK to select and scroll between Message Notification On and Message Notification Off.
2. Press OK to select.
Modify Phonebook
Modify the contents of your phonebook (such as add,
delete or download). Press OK to choose between:
Add Contacts: Press OK to add more contacts from your
phone book. Push the desired contact(s) on your phone.
See your phone's manual on how to push contacts.
Delete Phonebook: Press OK to delete the current phone
book and call history. When Delete Phonebook appears,
press OK to confirm. SYNC takes you back to the Phone
Settings menu.
Download Phonebook: Press OK to select, then and press
OK again when Confirm Download? appears.
Auto Download
Automatically download your phone book each time your
*
phone connects to SYNC.
Press OK to select. When Auto Download On? appears,
press OK to have your phonebook automatically down**
loaded each time.
Select Off if you do not want to download your phonebook
every time your phone connects to SYNC. Your phonebook,
call history and text messages can only be accessed when
your specific phone is connected to SYNC.
Return
*
Exit the current menu.
Downloading times are phone-dependent and quantity-dependent.
**
When Auto Download is on, it automatically deletes any changes, additions or deletions
saved since your last download.
Bluetooth Devices
System Settings
The Bluetooth Devices menu allows you
to add, connect and delete devices, set a
phone as primary as well as turn your
Bluetooth feature on and off.
This menu provides access to your
Bluetooth Devices and Advanced menu
features. Use the arrow buttons to scroll
through the menu options.
269
Fiesta (CCT)
SYNC™
3. Scroll to Bluetooth Devices. Press OK.
1.
Press the phone button to enter the
phone menu
2. Scroll to System Settings. Press OK.
4. Scroll to select from the following
options:
If you select:
You can:
Add Bluetooth Device
See Using SYNC™ With Your Phone (page 261).
Connect Bluetooth Device
Connect a previously paired Bluetooth-enabled phone.
1. Press OK to select and view a list of previously paired
phones.
2. Scroll until you find the desired device, and then press
OK to connect the phone.
Set as Primary Phone
Set a previously paired phone as your primary phone.
Press OK to select and scroll to select the desired phone.
Press OK to confirm.
SYNC attempts to connect with the primary phone at every
ignition cycle. When you select a phone as a primary phone,
it appears first in the list and the system marks it with an
asterisk.
Set Bluetooth
Turn the Bluetooth feature on and off.
Press OK and scroll to toggle between On and Off. Make
a selection, and then press OK.
Setting Bluetooth to off disconnects all Bluetooth devices
and turns off all Bluetooth features.
Delete Device
Delete a paired phone.
Press OK and scroll to select the device. Press OK to
confirm.
Delete All Devices
Delete all previously paired phones (and all information
originally saved with those phones).
Press OK to select.
Return
Exit the current menu.
*
*
**
This is a speed-dependent feature.
**
You can only connect one device at a time. When another phone is connected, the
previous one is disconnected.
270
Fiesta (CCT)
SYNC™
Advanced
1.
Press the phone button to enter the
phone menu
2. Scroll to System Settings. Press OK.
3. Scroll to Advanced. Press OK.
4. Scroll to select from the following
options:
The Advanced menu allows you to access
and set prompts, languages, defaults,
perform a master reset, install an
application and view system information.
If you select:
You can:
Prompts
Get help from SYNC by using questions, helpful hints or
asking you for a specific action. To turn these prompts on
or off:
1. Press OK to select and scroll to select between On and
Off.
2. Press OK when the desired selection appears in the
display. SYNC takes you back to the Advanced menu.
Languages
Choose between English, Français and Español. Once
selected, all of the radio displays and prompts are in the
selected language.
1. Press OK to select and then scroll through the languages.
2. Press OK when the desired selection appears in the
display. If you change the language setting, the display
indicates that the system is updating. When complete,
SYNC takes you back to the Advanced menu.
Factory Defaults
Return to the factory default settings. This selection does
not erase your indexed information (phonebook, call
history, text messages and paired devices).
1. Press OK to select and then press OK again when
Restore Defaults? appears in the display.
2. Press OK to confirm.
Master Reset
Completely erase all information stored on SYNC
(phonebook, call history, text messages and paired
devices) and return to the factory default settings.
Press OK to select. The display indicates when complete
and SYNC takes you back to the Advanced menu.
Install Application?
Install applications you have downloaded.
Press OK and scroll to select. Press OK to confirm.
Delete All Devices
Delete all previously paired phones (and all information
originally saved with those phones).
Press OK to select.
System Info
Access the Auto Version number as well as the FDN
number.
271
Fiesta (CCT)
SYNC™
If you select:
You can:
Press OK to select.
MAP Profile
This is a Bluetooth component, which can further help
your phone with the exchange of text messages.
Return
Exit the current menu.
WARNINGS
SYNC™ APPLICATIONS AND
SERVICES
Do not wait for 911 Assist to make an
emergency call if you can do it
yourself. Dial emergency services
immediately to avoid delayed response
time which could increase the risk of
serious injury or death after a crash. If you
do not hear 911 Assist within five seconds
of the crash, the system or phone may be
damaged or non-functional.
In order for the following features to work,
your cellular phone must be compatible
with SYNC. To check your phone's
compatibility, visit www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
*
• SYNC Services : Provides access to
traffic, directions and information such
as travel, horoscopes, stock prices and
more.
• 911 Assist: Can alert 911 in the event of
an emergency.
*
• Vehicle Health Report : Provides a
diagnostic and maintenance report
card of your vehicle.
Always place your phone in a secure
location in your vehicle so it does not
become a projectile or get damaged
in a crash. Failure to do so may cause
serious injury to someone or damage the
phone which could prevent 911 Assist from
working properly.
Note: The SYNC 911 Assist feature must be
set on before the incident.
*
This is an optional feature and available
in the United States only.
Note: Before setting this feature on, make
sure that you read the 911 Assist Privacy
Notice later in this section for important
information.
911 Assist
WARNINGS
Unless the 911 Assist setting is set on
before a crash, the system will not
dial for help which could delay
response time, potentially increasing the
risk of serious injury or death after a crash.
Note: If any user turns 911 Assist on or off,
that setting applies for all paired phones. If
911 Assist is turned off, either a voice
message plays or a display message (or
icon) comes on (or both) when your vehicle
is started after a previously paired phone
connects.
Note: Every phone operates differently.
While SYNC 911 Assist works with most
cellular phones, some may have trouble
using this feature.
272
Fiesta (CCT)
SYNC™
•
If a crash deploys an airbag (excluding
knee airbags and rear inflatable safety
belts [if equipped]) or activates the fuel
pump shut-off, your SYNC-equipped
vehicle may be able to contact emergency
services by dialing 911 through a paired and
connected Bluetooth-enabled phone. You
can learn more about the 911 Assist
feature, visit www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
•
•
•
See Supplementary Restraints System
(page 34). Important information about
airbag deployment is in this chapter.
See Roadside Emergencies (page 166).
Important information about the fuel pump
shut-off is in this chapter.
In the Event of a Crash
Not all crashes will deploy an airbag or
activate the fuel pump shut-off (the
triggers for 911 Assist). If a connected cell
phone sustains damage or loses its
connection to SYNC during a crash, SYNC
will search for and try to connect to a
previously paired cell phone; SYNC will
then attempt to call the emergency
services.
Setting 911 Assist On
1.
2.
3.
4.
5.
Press the phone button to enter the
phone menu.
Scroll to select 911 Assist.
Press OK to confirm and enter the 911
Assist menu.
Scroll to select between On and Off.
Press OK when the desired option
appears in the radio display. Set On or
Set Off appears in the display as
confirmation.
Before making the call:
• SYNC provides a short window of time
(about 10 seconds) to cancel the call.
If you fail to cancel the call, SYNC
attempts to dial 911.
• SYNC says the following, or a similar
message: "SYNC will attempt to call
911, to cancel the call, press Cancel on
your screen or press and hold the
phone button on your steering wheel."
Off selections include:
• Off with reminder: Provides a display
and voice reminder at phone
connection at vehicle start.
• Off without reminder: Provides a
display reminder only without a voice
reminder at phone connection.
If you do not cancel the call, and SYNC
makes a successful call, a pre-recorded
message plays for the 911 operator, and
then the occupant(s) in your vehicle is able
to talk with the operator. Be prepared to
provide your name, phone number and
location immediately, because not all 911
systems are capable of receiving this
information electronically.
To make sure that 911 Assist works
properly:
• SYNC must be powered and working
properly at the time of the incident and
throughout feature activation and use.
• The 911 Assist feature must be set on
before the incident.
273
Fiesta (CCT)
You must pair and connect a
Bluetooth-enabled and compatible
cell phone to SYNC.
A connected Bluetooth-enabled phone
must have the ability to make and
maintain an outgoing call at the time
of the incident.
A connected Bluetooth-enabled phone
must have adequate network coverage,
battery power and signal strength.
The vehicle must have battery power
and be located in the U.S., Canada or
in a territory in which 911 is the
emergency number.
SYNC™
Note: Your Vehicle Health Report feature
requires activation before use. Visit
www.SYNCMyRide.com to register. There
is no fee or subscription associated with
Vehicle Health Report, but you must register
to use this feature.
911 Assist May Not Work If
•
•
•
Your cellular phone or 911 Assist
hardware sustains damage in a crash.
The vehicle's battery or the SYNC
system has no power.
The phone(s) thrown from your vehicle
are the ones paired and connected to
the system.
Note: This feature may not function
properly if you have enabled caller ID
blocking on your cellular phone. Before
running a report, review the Vehicle Health
Report Privacy Notice.
911 Assist Privacy Notice
When you turn on 911 Assist, it may
disclose to emergency services that your
vehicle has been in a crash involving the
deployment of an airbag or activation of
the fuel pump shut-off. Certain versions or
updates to 911 Assist may also be capable
of electronically or verbally disclosing to
911 operators your vehicle location or other
details about your vehicle or crash to assist
911 operators to provide the most
appropriate emergency services. If you do
not want to disclose this information, do
not turn the feature on.
Note: In order to allow a break-in period for
your vehicle, you may not be able to create
a Vehicle Health Report until your vehicle
odometer has reached 200 miles.
Note: Cellular phone and SMS charges may
apply when making a report.
Register for Vehicle Health Report and set
your report preferences at
www.SYNCMyRide.com. After registering,
you can request a Vehicle Health Report
(inside your vehicle). Return to your
account at www.SYNCMyRide.com to view
your report. You can also choose for SYNC
to remind you automatically to run reports
at specific mileage intervals.
Vehicle Health Report
WARNING
The system allows you to check your
vehicle's overall health in the form of a
diagnostic report card. The vehicle health
report contains valuable information such
as:
• Vehicle diagnostic information
• Scheduled maintenance
• Open recalls and Field Service Actions
• Items noted during vehicle inspections
by an authorized dealer that still need
servicing.
Always follow scheduled
maintenance instructions, regularly
inspect your vehicle, and seek repair
for any damage or problem you suspect.
Vehicle Health Report supplements, but
cannot replace, normal maintenance and
vehicle inspection. Vehicle Health Report
only monitors certain systems
electronically monitored by your vehicle
and will not monitor or report the status
of any other system, (such as brake lining
wear). Failure to perform scheduled
maintenance and regularly inspect your
vehicle may result in vehicle damage and
serious injury.
You can run a report (after your vehicle has
been running a minimum of 60 seconds)
by pressing the voice button and saying
"Vehicle health report", or pressing the
phone button.
Note: This feature is only available in the
United States.
To run a report using the phone button:
274
Fiesta (CCT)
SYNC™
3. Scroll to select from the following
options:
1.
Press the phone button to enter phone
menu.
2. Scroll to select Vehicle Health, and
then press OK.
Vehicle health report options
User Preferences: Press OK Automatic Reports: Press OK to and select On or Off.
to select and enter the
Select On to have SYNC automatically prompt you to run
menu. Scroll to select from: a health report at certain mileage intervals.*
Mileage Intervals: Press OK. Scroll to select between
5000, 7500 or 10000-mile intervals and press OK to make
your selection.
Return: Press OK to exit the menu.
Run Report?
*
Press OK for SYNC to run a health report of your vehicle's
diagnostic systems and send the results to Ford where it
combines with scheduled maintenance information, open
recalls and other field service actions and vehicle inspection items that still need servicing from an authorized
dealer.
You must first turn this feature on before you can select the desired mileage interval.
SYNC Services: Traffic, Directions
& Information (TDI)
Vehicle Health Report Privacy Notice
When you create a Vehicle Health Report,
Ford Motor Company may collect your
cellular phone number (to process your
report request) and diagnostic information
about your vehicle. Certain versions or
updates to Vehicle Health Report may also
collect more vehicle information. Ford may
use your vehicle information it collects for
any purpose. If you do not want to disclose
your cellular phone number or vehicle
information, do not run the feature or set
up your Vehicle Health Report profile at
www.SYNCMyRide.com. See
www.SYNCMyRide.com (Vehicle Health
Report Terms and Conditions, and Privacy
Statement) for more information.
Note: SYNC Services requires activation
before use. Visit www.SYNCMyRide.com to
register and check your eligibility for
complimentary services. Standard phone
and message rates may apply. Subscription
may be required. You must also have the
active SYNC Services Bluetooth-enabled
cellular phone paired and connected to the
system in order to connect to, and use,
SYNC Services. See Using SYNC™ With
Your Phone (page 261).
Note: This feature does not function
properly if you have enabled caller ID
blocking on your cellular phone. Make sure
your cellular phone is not blocking caller ID
before using SYNC Services.
275
Fiesta (CCT)
SYNC™
Note: The driver is ultimately responsible
for the safe operation of the vehicle, and
therefore, must evaluate whether it is safe
to follow the suggested directions. Any
navigation features provided are only an aid.
Make your driving decisions based on your
observations of local conditions and existing
traffic regulations. Do not follow the route
suggestions if doing so would result in an
unsafe or illegal maneuver, place you in an
unsafe situation, or if you would be directed
into an area that you consider unsafe. Maps
used by this system may be inaccurate
because of errors, changes in roads, traffic
conditions or driving conditions.
2. When prompted, say "Services". This
initiates an outgoing call to SYNC
Services using your paired and
connected Bluetooth-enabled cellular
phone.
3. Once you connect to the service, follow
the voice prompts to request the
desired service, such as Traffic or
Directions. You can also say, "What are
my choices?" to receive a list of
available services from which to
choose.
4. Say, "Services" to return to the Services
main menu or for help, say, "Help".
Note: When you connect, the service uses
GPS technology and advanced vehicle
sensors to collect your vehicle's current
location, travel direction and speed to help
provide you with the directions, traffic
reports, or business searches you request.
Further, to provide the services you request,
for continuous improvement, the service
may collect and record call details and voice
communications. For more information, see
SYNC Services Terms and Conditions at
www.SYNCMyRide.com. If you do not want
Ford or its service providers to collect your
vehicle travel information or other
information identified in the Terms and
Conditions, do not subscribe or use the
service.
Connecting to SYNC Services Using
the Phone Menu
1.
2.
3.
4.
5.
SYNC Services uses advanced vehicle
sensors, integrated GPS technology and
comprehensive map and traffic data, to
give you personalized traffic reports,
precise turn-by-turn directions, business
search, news, sports, weather and more.
For a complete list of services, or to learn
more, please visit www.SYNCMyRide.com.
6.
Receiving Turn-by-Turn Directions
1.
Connecting to SYNC Services Using
Voice Commands
1.
Press the voice button.
276
Fiesta (CCT)
Press the phone button to enter the
phone menu.
Scroll to Services.
Press OK to confirm and enter the
Services menu. The display indicates
the system is connecting.
Press OK. SYNC initiates the call to the
Services portal.
Once you connect to the service, follow
the voice prompts to request the
desired service, such as Traffic or
Directions. You can also say, "What are
my choices?" to receive a list of
available services from which to
choose.
Say, "Services" to return to the Services
main menu or for help, say, "Help".
When connected to SYNC Services,
say "Directions" or "Business search".
To find the closest business or type of
business to your current location, just
say "Business search" and then
"Search near me". If you need further
assistance in finding a location you can
say "Operator" at any time within a
SYNC™
Directions or Business search to speak
with a live operator. The system may
prompt you to speak with an operator
when it has difficulty matching your
voice request. The live operator can
assist you by searching for businesses
by name or by category, residential
addresses by street address or by
name or specific street intersections.
Operator Assist is a feature of your
SYNC Services subscription. For more
information on Operator Assist, visit
www.SYNCMyRide.com/support.
2. Follow the voice prompts to select your
destination. Once you select your
destination, the system uploads your
current vehicle location, calculates a
route based on current traffic
conditions and sends it back to your
vehicle. After the route download is
complete, the phone call automatically
ends. You then receive audible and
visual driving instructions as you travel
toward your destination.
3. While on an active route, you can select
or say "Route summary" or "Route
status" to view the Route Summary
turn list or the Route Status ETA. You
can also turn voice guidance on or off,
cancel the route or update the route.
If you miss a turn, SYNC automatically asks
if you want the route updated. Just say,
"Yes" when prompted and the system
sends a new route to your vehicle.
Disconnecting from SYNC Services
1.
Press and hold the phone button on
the steering wheel.
2. Say "Goodbye" from the SYNC
Services main menu.
SYNC Services quick tips
Personalizing
You can personalize your Services feature to provide
quicker access to your most used or favorite information.
You can save address points such as work or home. You
can also save favorite information like sports teams or a
news category. You can learn more about personalization
by logging onto www.SYNCMyRide.com.
Push to interrupt
Press the voice button at any time (while connected to
SYNC Services) to interrupt a voice prompt or an audio
clip (such as a sports report) and say your voice command.
Portable
Your subscription is associated with your Bluetoothenabled cellular phone number, not your VIN (Vehicle
Identification Number). You can pair and connect your
phone to any vehicle equipped with SYNC Services and
continue enjoying your personalized services.
You can even access your account outside your vehicle.
Just use the number on your phone's call history. Traffic
and Directions features do not function properly but
information services and the 411 connect and text message
features are available.
277
Fiesta (CCT)
SYNC™
SYNC AppLink
To Access Using the Media Menu
Note: This feature is only available in the
United States.
1.
Note: You must pair and connect your
smartphone to SYNC to access AppLink.
2.
Note: iPhone users need to connect the
phone to the USB port in order to start the
application. We recommend you lock your
iPhone after starting an application.
3.
4.
5.
Note: The AppLink feature is not available
if your vehicle is equipped with the MyFord
Touch or MyLincoln Touch system.
6.
Note: Depending on your display type, you
can access AppLink from the media menu,
the phone menu, or by using voice
commands. Once an app is running through
AppLink, you can control main features of
the app through voice commands and
steering wheel controls.
7.
8.
To Access Using the Phone Menu
1.
2.
3.
4.
5.
6.
Press the phone button to access the
SYNC phone menu on-screen.
Scroll to Mobile Apps and press OK to
access a list of available applications.
Scroll through the list of available
applications and press OK to select a
particular app.
Once an app is running through SYNC,
you can access an app’s menu by
pressing the MENU button to first
access the SYNC menu.
Select "SYNC-Media" by pressing OK.
Scroll until "<App name> Menu" is
displayed (such as, Pandora Menu),
then press OK. From here, you can
access an application's features, such
as Thumbs up and Thumbs down. For
more information, please visit
www.SYNCMyRide.com.
To Access Using Voice Commands
1. Press the voice icon.
2. When prompted, say "Mobile Apps".
3. Say the name of the application after
the tone.
4. The app should start. While an app is
running through SYNC, you can press
the voice button and speak commands
specific to the app, such as "Play
Station Quickmix". Say "Help" to
discover available voice commands.
278
Fiesta (CCT)
Press the AUX button on the center
console.
Press MENU to access the SYNC
menu.
Select "SYNC-Media" by pressing OK.
Scroll to Mobile Apps and press OK to
access a list of available applications.
Scroll through the list of available
applications and press OK to select a
particular app.
Once an app is running through SYNC,
you can access an app’s menu by
pressing the MENU button to first
access the SYNC menu.
Select "SYNC-Media" by pressing OK.
Scroll until "<App name> Menu" is
displayed (such as, Pandora Menu),
then press OK. From here, you can
access an application's features, such
as Thumbs up and Thumbs down. For
more information, please visit
www.SYNCMyRide.com.
SYNC™
Press OK and scroll through selections of:
• Play All
• Albums
• Genres
• Playlists
• Tracks
• Explore USB
• Similar Music
• Return
USING SYNC™ WITH YOUR
MEDIA PLAYER
You can access and play music from your
digital music player over your vehicle's
speaker system using the system's media
menu or voice commands. You can also
sort and play your music by specific
categories, such as artist and album.
SYNC is capable of hosting nearly any
digital media player including: iPod®,
Zune™, Plays from device players, and
most USB drives. SYNC also supports
audio formats, such as MP3, WMA, WAV
and ACC.
What's Playing?
At any time when a track is playing, you
can press the voice icon and ask the
system "What's playing?". The system
reads the metadata tags (if populated) of
the playing track to you.
Connecting Your Digital Media
Player to the USB Port
Note: If your digital media player has a
power switch, make sure you switch it on
before plugging it in.
Media Voice Commands
To Connect Using Voice Commands
E142599
1. Plug the device into the USB port.
2. Press the voice icon and when
prompted, say "USB".
3. You can now play music by saying any
of the appropriate voice commands.
See the media voice commands.
Press the voice icon. When
prompted, say "USB", then any
of the following:
"USB"
"Autoplay off"
"Autoplay on"
"Connections"
To Connect Using the System Menu
"Pause"
1. Plug the device into the USB port.
2. Press AUX and then MENU to enter
the media menu.
3. Scroll to Select Source. Press OK.
4. Scroll to USB. Press OK.
5. Depending on how many digital media
files are on your connected device,
Indexing may appear in the radio
display. When indexing is complete, the
screen returns to the Play menu.
"Play"
"Play album <name>"
"Play all"
"Play artist <name>"
1,2
"Play genre <name>"
"Play next folder"
"Play next track"
279
Fiesta (CCT)
1,2
3
1,2
SYNC™
"USB"
"USB"
"Play playlist <name>"
1,2
"Search artist <name>"
3
1,2
"Play previous folder"
"Search genre <name>"
"Play previous track"
"Search song <name>"
"Play song <name>"
1,2
1,2
"Search track <name>"
1,2
"Play track <name>"
1,2
1,2
"Shuffle off"
"Shuffle on"
1,2
"Refine album <name>"
"Similar music"
1,2
"Refine artist <name>"
"What's playing?"
"Refine song <name>"
1,2
"Refine track <name>"
1
<name> is a dynamic listing, meaning that
it could be the name of anything, such as
a group, artist or song.
1,2
"Repeat off"
2
This voice command is not available until
indexing is complete.
"Repeat on"
3
This voice command is only available in
folder mode.
1,2
"Search album <name>"
Voice command guide
"Autoplay"
Turn autoplay on to listen to music processed during
indexing. Turn autoplay off to allow the indexing process
to finish before the system plays any of your music.
*
"Search genre" or "Play
genre"
The system searches all the data from your indexed music
and, if available, begins to play the chosen type of music.
You can only play genres of music that are present in the
GENRE metadata tags that you have on your digital media
player.
"Similar music"
The system compiles a playlist and then plays music
similar to what is currently playing from the USB port using
indexed metadata information.
280
Fiesta (CCT)
SYNC™
Voice command guide
"Search" or "Play" artist,
track or album
The system searches for specific artist, track or album
information from the music indexed through the USB port.
"Refine"
This allows you to make your previous command more
specific. For example, if you asked to search and play all
music by a certain artist, you could then say, "Refine
album" and choose a specific album from the list to view.
If you then select Play, the system only plays music from
that specific album.
*
Indexing times can vary from device to device and with regard to the number of songs
the system needs to process.
Media Menu Features
Press the voice icon. When prompted, say,
"Bluetooth audio", then any of the
following:
The media menu allows you to select your
media source, how to play your music
(such as by artist, genre, shuffle or repeat),
and also to add, connect or delete devices.
"BLUETOOTH AUDIO"
Press AUX and then MENU to enter
the media menu.
2. Scroll to cycle through:
1.
"Connections"
"Pause"
"Play"
"Play next track"
"Play previous track"
When you select:
You can:
Play Menu
Play your music by artist, album, genre, playlist, track,
similar music or play all music. You can also choose to
Explore USB to view the supported digital music files on
your playing device.
Select Source
Select and play music from your USB port, auxiliary input
jack (line in) or stream music from your Bluetooth-enabled
phone.
SYNC USB: Press OK to access music plugged into your
USB port. You can also plug in devices to charge them (if
supported by your device). Once connected, the system
1
indexes any readable media files.
281
Fiesta (CCT)
SYNC™
When you select:
You can:
Bluetooth Audio: This is a phone-dependent feature that
allows you to stream music playing on your Bluetoothenabled phone. If supported by your device, you can press
SEEK to play the previous or next track.
SYNC Line In: Press OK to select and play music from your
2
portable music player over your vehicle's speakers.
Media Settings
Choose to shuffle or repeat your music and select your
Autoplay settings. Once you turn these selections on, they
remain on you turn them off. Press SEEK to play the
previous or next track.
3
Shuffle: Press OK to shuffle available media files in the
current playlist. To shuffle all media tracks, you must select
Play All in the play menu and then select Shuffle.
Repeat: Press OK to repeat any song.
Autoplay: Turn autoplay on to listen to music processed
during indexing. Turn autoplay off to allow the indexing
process to finish before the system plays any of your
4
music.
Mobile Apps
Interact with SYNC-capable mobile applications on your
smartphone.
282
Fiesta (CCT)
SYNC™
When you select:
You can:
System Settings
Access Bluetooth Device menu listings (Add, Connect, Set
as Primary, On and Off, Delete) as well as Advanced menu
listings (prompts, languages, defaults, master reset, install
application and system information).
Exit Media Menu
Press OK to exit the media menu.
1
The time required to complete this depends on the size of the media the system needs
to index. If autoplay is on, you can listen to media processed during indexing. If autoplay
is off, you cannot listen to music until the system finishes indexing media. SYNC is capable
of indexing thousands of average size media and notifies you if it reaches the maximum
indexing file size.
2
If you have already connected a device to the USB port, you cannot access the line in
feature. Some digital media players require both USB and line in ports to stream data
and music separately.
3
Some digital media players require both USB and line in ports to stream data and music
separately
4
Indexing times can vary from device to device and with regard to the number of songs
the system needs to process.
Press AUX and then MENU to enter
the media menu.
2. Scroll to Play. Press OK.
1.
Accessing Your Play Menu
This menu allows you to select and play
your media by artist, album, genre, playlist,
track, similar music or even to explore what
is on your USB device.
If there are no media files to access, the
display indicates there is no media. If there
are media files, you have the following
options:
Note: If your digital media player has a
power switch, make sure you switch it on
before plugging it in.
When you select:
You can:
Play All
Play all indexed media (tracks) from your playing device
in flat file mode, one at a time in numerical order.
Press OK to select. The first track title appears in the
display.
Artists
Sort all indexed media by artist. Once selected, the system
lists and then play all artists and tracks alphabetically. If
there are fewer than 255 indexed artists, the system lists
them alphabetically in flat file mode. If there are more
than 255, the system categorizes them alphabetically.
283
Fiesta (CCT)
SYNC™
When you select:
You can:
1. Press OK to select. You can select to play All Artists or
any indexed artist.
2. Scroll to choose the desired artist. Press OK.
Albums
Sort all indexed media by albums. If there are fewer than
255 indexed albums, the system lists them alphabetically
in flat file mode. If there are more than 255, the system
categorizes them alphabetically.
1. Press OK to enter the album menu and select from
playing all albums or from any individual indexed album.
2. Scroll to choose the desired album. Press OK.
Genres
Sort indexed music by genre (category) type. SYNC lists
the genres alphabetically in flat file mode. If there are more
than 255, the system categorizes them alphabetically.
1. Press OK to select.
2. Scroll to select the desired genre. Press OK.
Playlists
Access your playlists (from formats, such as .ASX, .M3U,
.WPL or .MTP). The system lists your playlists alphabetically in flat-file mode. If there are more than 255, the system
categorizes them alphabetically.
1. Press OK to select.
2. Scroll to select the desired playlist. Press OK.
Tracks
Search for and play a specific indexed track. SYNC lists
your tracks alphabetically in flat file mode. If there are
more than 255, the system categorizes them alphabetically.
1. Press OK to select.
2. Scroll to select the desired track. Press OK.
Explore USB
Explore all supported digital media on your media device
connected to the USB port. You can only view media
content which is compatible with SYNC; other files saved
are not visible.
1. Press OK to select.
2. Scroll to explore indexed media on your flash drive.
*
Similar Music
Play music similar to what is currently playing from the
USB port. The system uses the metadata information of
each song to compile a playlist for you.
284
Fiesta (CCT)
SYNC™
When you select:
You can:
Press OK to select. The system creates a new list of similar
songs and begins playing. This feature does not include
tracks with incomplete metadata information.
Return
Exit the current menu.
*
With certain playing devices, if your metadata tags are not populated, the tracks are not
available in voice recognition, play menu or similar music. However, if you place these
tracks onto your playing device in "Mass Storage Device Mode", they are available in voice
recognition, play menu browsing and similar music. The system places Unknown items
into any unpopulated metadata tag.
1.
Press AUX and then MENU to enter
the media menu.
2. Scroll to System Settings. Press OK.
3. Scroll to Bluetooth Devices. Press OK.
System Settings
Bluetooth Devices
The Bluetooth Devices menu allows you
to add, connect and delete a device as turn
the Bluetooth feature on and off.
When you select:
You can:
Add Bluetooth Device
Pair more devices to the system.
1. Press OK to select and press OK again when Find SYNC
appears in the display.
2. Follow the directions in your phone's manual to put your
phone into discovery mode. A six-digit PIN appears in the
display.
3. When prompted on your phone's six-digit display, enter
the PIN.
Connect Bluetooth Device
Connect a previously paired Bluetooth-enabled device.
1. Press OK to select and view a list of previously paired
devices.
2. Scroll until you find the desired device, and then press
OK to connect the device.
Set Bluetooth
Turn the Bluetooth feature on and off.
1. Press OK and scroll to toggle between On and Off.
2. Make a selection, and then press OK.
Delete Device
Delete a paired media device.
1. Press OK and scroll to select the device.
2. Press OK to confirm.
Delete All Devices
Delete all previously paired devices.
*
**
285
Fiesta (CCT)
SYNC™
When you select:
You can:
Press OK to select.
Return
*
Exit the current menu.
This is a speed-dependent feature.
**
Setting Bluetooth to off disconnects all Bluetooth devices and turns off all Bluetooth
features.
1.
Press AUX and then MENU to enter
the media menu.
2. Scroll to System Settings. Press OK.
3. Scroll to Advanced. Press OK.
Advanced
The Advanced menu allows you to access
and set prompts, languages, defaults and
perform a master reset.
When you select:
You can:
Prompts
Have SYNC guide you by asking questions, helpful hints
or ask you for a specific action.
1. Press OK to select and scroll to select between on or
off.
2. Press OK when the desired selection appears in the
display. SYNC takes you back to the Advanced menu.
Languages
Choose from English, Français or Español. The displays
and prompts are in the selected language.
1. Press OK to select and then scroll through the languages.
2. Press OK when the desired selection appears in the
display.
3. If you change the language setting, the display indicates
that the system is updating. When complete, SYNC takes
you back to the Advanced menu.
Factory Defaults
Return to the factory default settings. This selection does
not erase your indexed information (phonebook, call
history, text messages and paired devices).
1. Press OK to select.
2. Press OK again when Restore Defaults? appears in
the display.
3. Press OK to confirm.
286
Fiesta (CCT)
SYNC™
When you select:
You can:
Master Reset
Completely erase all information stored on SYNC (all
phonebook, call history, text messages and all paired
devices) and return to the factory default settings.
Application
Download new software applications (if available) and
then load the desired applications through your USB port.
See the web site for more information.
Return
Exit the current menu.
Use the website at any time to check your
phone's compatibility, register your
account and set preferences as well as
access a customer representative via an
online chat (during certain hours). Visit
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca for more
information.
SYNC™ TROUBLESHOOTING
Your SYNC system is easy to use. However,
should questions arise, see the tables
below.
Phone issues
Issue
Possible cause(s)
Possible solution(s)
The audio control settings
There is excessive background noise during a phone on your phone may be
affecting SYNC performcall.
ance.
Review your phone's manual
about audio adjustments.
During a call, I can hear the
other person but they
cannot hear me.
This may be a possible
phone malfunction.
Try turning off the device,
resetting the device,
removing the device's
battery, then trying again.
SYNC is not able to download my phonebook.
· This is a phone-dependent
feature.
· This may be a possible
phone malfunction.
· Go to the website to review
your phone's compatibility.
· Try turning off the device,
resetting the device or
removing the device's
battery, then trying again.
· Try pushing your phonebook contacts to SYNC by
using the Add Contacts
feature.
· Use the SYNCmyphone
feature available on the
website.
287
Fiesta (CCT)
SYNC™
Phone issues
Issue
Possible cause(s)
Possible solution(s)
The system says Phonebook This may be a limitation on
Downloaded but the
your phone's capability.
phonebook in SYNC is
empty or missing contacts.
· Try pushing your phonebook contacts to SYNC by
using the Add Contacts
feature.
· If the missing contacts are
stored on your SIM card, try
moving them to the device
memory.
· Remove any pictures or
special ring tones associated with the missing
contact.
I am having trouble
connecting my phone to
SYNC.
· This is a phone-dependent
feature.
· This may be a possible
phone malfunction.
· Go to the website to review
your phone's compatibility.
· Try turning off the device,
resetting the device or
removing the device's
battery, then trying again.
· Try deleting your device
from SYNC, deleting SYNC
from your device and trying
again.
· Check the security and auto
accept and prompt always
settings relative to the SYNC
Bluetooth connection on
your phone.
· Update your device's firmware.
· Turn off the Auto phonebook download setting.
Text messaging is not
working on SYNC.
· This is a phone-dependent
feature.
· This may be a possible
phone malfunction.
· Go to the website to review
your phone's compatibility.
· Try turning off the device,
resetting the device or
removing the device's
battery, then trying again.
288
Fiesta (CCT)
SYNC™
USB and media issues
Issue
I am having trouble
connecting my device.
Possible cause(s)
This may be a possible
device malfunction.
SYNC does not recognize
This is a device limitation.
my device when I turn on the
car.
Possible solution(s)
· Try turning off the device,
resetting the device,
removing the device's
battery, then trying again.
· Make sure you are using the
manufacturer's cable.
· Make sure you insert the
USB cable properly into the
device and the USB port.
· Make sure that the device
does not have an autoinstall program or active
security settings.
Make sure you are not
leaving the device in your
vehicle during very hot or
cold temperatures.
Bluetooth audio does not
stream.
· This is a phone-dependent
feature.
· The device is not
connected.
Make sure you properly
connect the device to SYNC
and that you have pressed
play on your device.
SYNC does not recognize
music that is on my device.
· Your music files may not
contain the proper artist,
song title, album or genre
information.
· The file may be corrupted.
· The song may have copyright protection, which does
not allow it to play.
· Make sure that all song
details are populated.
· Some devices require you
to change the USB settings
from mass storage to MTP
class.
Vehicle Health Report and Services (Traffic, Directions and Information) issues
Issue
I received a text that I did
not activate Vehicle Health
Report.
Possible cause(s)
· You did not activate your
account on the website.
· You may have the wrong
VIN (vehicle identification
number) listed.
289
Fiesta (CCT)
Possible solution(s)
· This is a free feature, but
you must first register online
to use it.
SYNC™
Vehicle Health Report and Services (Traffic, Directions and Information) issues
Issue
Possible cause(s)
Possible solution(s)
· Make sure that your VIN is
correctly listed in your
account.
I am unable to retrieve the
report on the website, or I
receive a system error.
The preferred dealer
information did not load
correctly.
When you register your
account, you must choose a
preferred dealer. If it already
lists a dealer, try selecting
another dealer and logging
out. Log back in, change it
back to your preferred
dealer, and retrieve the
report.
I am unable to submit a
report.
· This could be due to your
phone's compatibility.
· Bad signal strength.
· You did not activate your
phone on the website.
· Update your cellular
number in your account on
the website.
· Make sure you have full
signal strength and that your
Bluetooth volume level has
been turned up.
· Try deleting your phone
and performing a clean
pairing.
I heard a commercial when
I tried to use Traffic, Directions and Information.
· You did not activate this
phone for this service.
· Your phone has ID blocker
active.
· This is a free feature, but
you must first register online
to use it.
· Turn off ID blocker on your
phone as the system recognizes you by your phone
number.
· Make sure the currently
connected phone is the
same one that is registered
on your SYNCMyRide
account.
290
Fiesta (CCT)
SYNC™
Voice command issues
Issue
Possible cause(s)
Possible solution(s)
SYNC does not understand · You may be using the
wrong voice commands.
what I am saying.
· You may be speaking too
soon or at the wrong time.
· Review the phone voice
commands and the media
voice commands at the
beginning of their respective
sections.
· Be aware that SYNC's
microphone is either in your
rear view mirror or in the
headliner just above the
windshield.
SYNC does not understand · You may be using the
the name of a song or artist. wrong voice commands.
· You may be saying the
name differently than the
way you saved it.
· The system may not be
reading the name the same
way you are saying it.
· Review the media voice
commands at the beginning
of the media section.
· Say the song or artist
exactly as listed. If you say
"Play Artist Prince", the
system does not play music
by Prince and the Revolution
or Prince and the New
Power Generation.
· Make sure you are saying
the complete title, such as
"California remix featuring
Jennifer Nettles".
· If the song titles are in all
CAPS, you have to spell
them. LOLA requires you to
say "L-O-L-A".
· Do not use special characters in the title. The system
does not recognize them.
SYNC does not understand
or is calling the wrong
contact when I want to
make a call.
· Review the Phone voice
commands at the beginning
of the phone section.
· Make sure you are saying
the contacts exactly as they
are listed. For example, if
you save a contact as Joe
Wilson, say "Call Joe
Wilson".
· You may be using the
wrong voice commands.
· You may be saying the
name differently than the
way you saved it.
· Contacts in your phonebook may be very short and
similar, or they may contain
special characters.
291
Fiesta (CCT)
SYNC™
Voice command issues
Issue
Possible cause(s)
Possible solution(s)
· Your phonebook contacts
may be in CAPS.
· The system works better if
you list full names, such as
"Joe Wilson" rather than
"Joe".
· Do not use special characters, such as 123 or ICE, as
the system does not recognize them.
· If a contact is in CAPS, you
have to spell it. JAKE
requires you to say "Call JA-K-E".
292
Fiesta (CCT)
MyFord Touch™ (If Equipped)
GENERAL INFORMATION
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving
E162500
A
Phone
B
Navigation
C
Settings
D
Home icon
E
Information icon
F
Entertainment
293
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Press to select any of the following:
• Clock
• Display
• Sound
• Vehicle
• Settings
• Help
This system uses a four-corner strategy to
provide quick access to several vehicle
features and settings. The touchscreen
provides easy interaction with your cell
phone, entertainment, information and
system settings. The corners display active
modes within the menus, for example; your
cell phone's status.
Note: Some features are not available while
your vehicle is moving.
HOME
Note: You can access the Home or
Information menus by pressing the relevent
button on the steering wheel controls.
E142613
Note: Depending on your vehicle’s option
package and software, the screens may vary
in appearance from the descriptions in this
section. The features may also be limited
depending on the market. Check with an
authorized dealer for availability.
Note: You can access the entertainment
features for 30 minutes after you switch the
ignition off, and no doors are opened.
PHONE
Press to select any of the following:
• Phone
• Quick Dial
• Phonebook
• History
• Messaging
• Settings
INFORMATION
E142608
Press to select any of the following:
• Services
• Travel Link
• Alerts
• Calendar
• Apps
NAVIGATION
Press to select any of the following:
• My Home
• Favorites
• Previous Destinations
• Point of Interest
• Emergency
• Street Address
• Intersection
• City Center
• Map
• Edit Route Cancel Route
ENTERTAINMENT
Press to select any of the following:
• AM
• FM
• SIRIUS
• CD
• USB
• BT Stereo
• SD Card
• Line In
SETTINGS
E142607
294
Fiesta (CCT)
Press to access the home
screen.
MyFord Touch™ (If Equipped)
Using the Touch-Sensitive
Controls
Cleaning the Touchscreen Display
Use a dry, clean, soft cloth. If dirt or
fingerprints are still visible, apply a small
amount of alcohol to the cloth. Do not pour
or spray alcohol onto the display. Do not
use detergent or any type of solvent to
clean the display.
To turn a feature on or off using the
touch-sensitive controls:
• Make sure your hands are clean and
dry.
• Press firmly on the center of a control
graphic or menu item.
• Keep metal objects or other conductive
material away from the surface of the
touchscreen.
Support
The SYNC support team is available:
• Monday-Saturday, 8:30am-8:00pm
EST.
• United States: 1-888-270-1055
• Canada: 1-800-565-3673
Depending on your vehicle’s option
package and software, it may also have
the following controls:
• Power: Switch the media features on
or off.
• VOL: Adjust the volume of playing
media.
• Seek: Use as you normally would in
media modes.
• Tune: Use as you normally would in
media modes.
• Eject: Eject a CD from the
entertainment system.
• SOURCE: Touch the control
repeatedly to switch between media
modes.
• SOUND: Adjust the settings for:
• Bass
• Treble
• Midrange
• Balance
• Fade
• DSP (Digital Signal Processing)
• Occupancy Mode
• Speed Compensated Volume.
• Hazard warning flasher: Switch the
hazard warning flashers on or off.
Note: Times are subject to change due to
holidays.
Safety Information
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving
•
•
295
Fiesta (CCT)
Do not attempt to service or repair the
system. Have your vehicle checked by
an authorized dealer.
Do not operate media devices if the
power cables are broken or damaged.
MyFord Touch™ (If Equipped)
•
•
Speed-restricted Features
Make sure the power cables do not
interfere with the safe operation of your
vehicle's controls or affect your safe
driving abilities.
Some SYNC functions are
speed-dependent. Their use is limited
to when your vehicle is travelling at
speeds below 3 mph (5 km/h).
Some features of this system are restricted
from use unless your vehicle is stationary.
• Screens crowded with information, for
example:
• Point of Interest reviews and ratings
• SIRIUS Travel Link sports scores
• Movie times
• Ski conditions.
• Any action that requires keyboard use,
for example: entering a navigation
destination or editing information.
• All lists are limited, for example: phone
contacts.
Make sure that you review your device's
manual before using it with SYNC.
See the following chart for more specific
examples.
Restricted Features
Cell phone
Pairing a cell phone
Adding or editing phonebook contacts
Phone contacts and recent phone call entries
System Functionality
Enabling Valet Mode
Editing settings while the rear view camera or active park
assist are active
Wi-Fi and Wireless
Editing wireless settings
Editing the list of wireless networks
Photos and Graphics
Adding or editing wallpaper
Text Messages
Composing text messages
Viewing received text messages
Editing preset text messages
Navigation
Using the keyboard to enter a destination
Demo navigation route
Adding or editing Address Book or Avoid Area entries
296
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Privacy Information
a court order, or where required by law
enforcement, other government
authorities, or other third parties acting
with lawful authority. Other parties may
seek to access the information
independently of Ford Motor Company and
Ford of Canada. For further privacy
information, see the sections on 911
Assist®, Vehicle Health Report, and Traffic,
Directions and Information.
When you connect a cell phone to SYNC,
the system creates a profile within your
vehicle that links to that cell phone. This
profile helps in offering you more cellular
features and operating more efficiently.
Among other things, this profile may
contain data about your cell phone book,
text messages (read and unread), and call
history, including history of calls when your
cell phone was not connected to the
system. In addition, if you connect a media
device, the system creates and retains an
index of supported media content. The
system also records a short development
log of approximately 10 minutes of all
recent system activity. The log profile and
other system data may be used to improve
the system and help diagnose any
problems that may occur.
Using Voice Commands
This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is in front of you.
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings).
The cellular profile, media device index,
and development log remain in your
vehicle unless you delete them, and are
generally accessible only in your vehicle
when your cell phone or media player is
connected. If you no longer plan to use the
system or your vehicle, we recommend you
carry out a Master Reset to erase all stored
information.
The system also asks short questions
(confirmation prompts) when it is not sure
of your request or when there are multiple
possible responses to your request.
When using voice commands, words and
icons may appear in the lower left status
bar indicating the status of the voice
command session (such as Listening,
Success, Failed, Paused or Try Again).
System data cannot be accessed without
special equipment and access to your
vehicle's SYNC module. Ford Motor
Company and Ford of Canada do not
access the system data for any purpose
other than as described without consent,
How to Use Voice Commands
E142599
Press the voice command icon.
After the tone, speak your voice
command clearly.
These voice commands can be said at any time during a voice command session
"Main menu"
"List of commands"
"What can I say?"
"Next page"
"Previous page"
297
Fiesta (CCT)
MyFord Touch™ (If Equipped)
These voice commands can be said at any time during a voice command session
"Go back"
"Cancel"
"Exit"
"Help"
What Can I Say?
•
To access the available voice commands
for the current voice command session, do
one of the following:
• During a voice command session, press
the Help icon ? in the lower left status
bar of the screen.
• Say, "What can I say?" for an
on-screen listing of the possible voice
commands associated with your
current voice command session.
• Press the voice command icon. After
the tone, say, "Help" to hear a list of
possible voice commands.
•
Accessing a List of Available Voice
Commands
If you use the touchscreen, press:
1. Settings.
2. Help.
3. Voice Command List.
If you use the steering wheel control, press
the voice command button. After the tone,
speak your voice command clearly.
Helpful Hints
•
•
Speak naturally, without long pauses
between words.
At any time, you can interrupt the
system while it is speaking by pressing
the voice command icon.
Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken voice commands.
After pressing the voice command icon,
wait until after the tone sounds and
Listening appears before saying a voice
command. Any voice command spoken
prior to this will not register with the
system.
Available Voice Commands
"Audio list of commands"
"Radio list of commands"
"Bluetooth audio list of commands"
"SD card list of commands"
"Browse list of commands"
"Sirius satellite list of commands"
298
Fiesta (CCT)
*
MyFord Touch™ (If Equipped)
Available Voice Commands
"CD list of commands"
"Travel link list of commands"
"Climate control list of commands"
"USB list of commands"
"List of commands"
"Voice instructions list of commands"
"Navigation list of commands"
*
"Voice settings list of commands"
*
"Phone list of commands"
"Help"
*
These voice commands are only available when your vehicle is fitted with a navigation
system, and the navigation system SD card is in the SD card slot.
To access these settings using the
touchscreen, press:
Voice Command Settings
These allow you to customize the level of
system interaction, help and feedback. The
system defaults to standard interaction
that uses candidate lists and confirmation
prompts as these provide the highest level
of guidance and feedback.
•
•
•
1. Settings icon.
2. Settings.
3. Voice Control.
Then select from the following:
•
•
•
•
•
Interaction Mode: Novice mode
provides detailed interaction and
guidance. Advanced mode has less
audible interaction and more tone
prompts.
Confirmation Prompts: The system
uses these short questions to confirm
your voice command. If turned off, the
system simply makes a best guess as
to what you requested. The system
may still occasionally ask you to
confirm a voice command.
Phone and Media Candidate Lists:
Candidate lists are lists of possible
results from your voice commands. The
system creates these lists when it has
the same confidence level of several
options based on your voice command.
To access these settings using voice
commands, press the voice command icon.
Wait for the prompt "Please say a
command". Another tone sounds to let you
know the system is listening.
299
Fiesta (CCT)
Interaction Mode
Confirmation Prompts
Media Candidate Lists
Phone Candidate Lists
Voice Control Volume.
MyFord Touch™ (If Equipped)
Voice command settings
"Interaction mode novice"
"Interaction mode advanced"
"Confirmation prompts on"
"Confirmation prompts off"
"Phone candidate lists on"
"Phone candidate lists off"
"Media candidate lists on"
"Media candidate lists off"
"Help"
Using Voice Commands with the
Touchscreen Options
The voice command system has a dual
mode feature which allows you to switch
between using voice commands and
making on-screen selections. This is
available only when the system displays a
list of candidates generated during a voice
command session. For example, when
entering a street address or trying to call a
contact from a cell phone paired to the
system.
300
Fiesta (CCT)
MyFord Touch™ (If Equipped)
SETTINGS
A
B
C
D
E
F
E161968
A
Clock
B
Display
C
Sound
D
Vehicle
E
Settings
F
Help
Note: If the battery has been disconnected,
your vehicle needs to acquire a GPS signal
to update the clock. Once your vehicle
acquires the signal, it may take a few
minutes for the update to display the correct
time.
Under this menu, you can set
your clock, access and adjust the
E142607
display, sound and vehicle
settings as well as access settings for
specific modes or the help feature.
Clock
To make adjustments using the
touchscreen, press:
E142607
1. Settings icon.
2. Clock.
3. + or - to adjust the time.
Note: You cannot manually set the date.
Your vehicle’s GPS does this for you.
301
Fiesta (CCT)
MyFord Touch™ (If Equipped)
From this screen, you can also make other
adjustments such as 12-hour or 24-hour
mode, activate GPS time synchronization
and have the system automatically update
new time zones.
Uploading Photos for Your Home
Screen Wallpaper
Note: You cannot load photos directly from
your camera. You must access the photos
either from your USB mass storage device
or from an SD card.
You can also turn the outside air
temperature display off and on. It appears
at the top center of the touchscreen, next
to the time and date.
Note: Photographs with extremely large
dimensions (such as 2048 x 1536) may not
be compatible and appear as a blank
(black) image on the display.
The system automatically saves any
updates you make to the settings.
Your system allows you to upload and view
up to 32 photos.
Display
To access, press:
You can adjust the touchscreen display
through the touchscreen or by pressing the
voice button on the steering wheel controls
and when prompted, say, "Display
settings".
E142607
1.
2.
3.
4.
To make adjustments using the
touchscreen, press:
E142607
1. Settings icon.
2. Display.
Only the photograph(s), which meets the
following conditions, display:
• Compatible file formats are as follows:
.jpg, .gif, .png, .bmp
• Each file must be 1.5 MB or less.
• Recommended dimensions: 800 x 384
Then select from the following:
•
•
•
Brightness allows you to make the
screen display brighter or dimmer.
Mode allows you to set the screen to
a certain brightness or have the system
automatically change based on the
outside light level.
• If you select AUTO or NIGHT, you
have the options of turning the
display's Auto Dim feature on or off
and changing the Auto Dim Manual
Offset feature.
Edit Wallpaper allows you to display
the default photo or upload your own.
Sound
To make adjustments using the
touchscreen, press:
E142607
1. Settings icon.
2. Sound.
Then select from the following:
•
•
•
•
•
302
Fiesta (CCT)
Settings icon.
Display.
Edit Wallpaper.
follow the system prompts to upload
your photographs.
Bass
Midrange
Treble
Set Balance and Fade
Occupancy Mode
MyFord Touch™ (If Equipped)
•
•
Rear View Camera
Speed Compensated Volume
*
DSP.
This menu allows you to access settings
for your rear view camera.
*
Note: Your vehicle may not have these
sound settings.
To make adjustments using the
touchscreen, press:
Vehicle
E142607
1. Settings icon.
2. Vehicle.
3. Rear View Camera.
To make adjustments using the
touchscreen, press:
E142607
1. Settings icon.
2. Vehicle.
Then select from the following:
•
•
•
Then select from the following:
•
•
•
•
•
•
•
•
Active Park Assist
Vehicle Health Report
Rear View Camera
Enable Valet Mode
MyKey
Traction Control
Electronic Stability Control
Hill Start Assist
You can find more information on the rear
view camera system in another chapter.
See Parking Aids (page 138).
Enable Valet Mode
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
Active Park Assist
When activated, your system displays
directions for you regarding the active park
assist process.
To access, press:
You can find more information on the
active park assist system in another
chapter. See Parking Aids (page 138).
E142607
1. Settings icon.
2. Vehicle.
3. Enable Valet Mode.
4. Continue
Note: After you press Continue the system
locks until you enter the PIN again.
Vehicle Health Report
Turn Automatic Reminders on and off
and set the mileage interval at which you
would like to receive the reports. Press the
? for more information on these selections.
Settings
When done making your selections, press
Run Vehicle Health Report Now if you
want your report.
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
You can find more information on Vehicle
Health Report in this chapter.
303
Fiesta (CCT)
Rear Camera Delay
Visual Park Aid Alert
Guidelines.
MyFord Touch™ (If Equipped)
System
1. Settings icon.
2. Settings.
3. System.
To access, press:
E142607
Then select from the following:
System
Language
Select to have the touchscreen display in English, Spanish
or French.
Distance
Select to display units in kilometers or miles.
Temperature
Select to display units in Celsius or Fahrenheit.
System Prompt Volume
Adjust the volume of voice prompts from the system.
Touch Screen Button Beep
Select to have the system beep to confirm choices made
through the touchscreen.
Touch Panel Button Beep
Select to have the system beep to confirm button choices
made through the climate or audio system.
Keyboard Layout
Have the touchscreen keyboard display in QWERTY or
ABC format.
Install Applications
Install any downloaded applications or view the current
software licenses.
Master Reset
Select to restore factory defaults. This erases all personal
settings and personal data.
1.
Settings icon.
2. Settings.
3. Voice Control.
Voice Control
To access, press:
E142607
Then select from the following:
Voice Control
Interaction Mode
Standard interaction mode provides more detailed interaction and guidance. Advanced mode has less audible
interaction and more tone prompts.
Confirmation Prompts
Have the system ask you short questions if it has not
clearly heard or understood your request.
304
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Voice Control
Note: Even with confirmation prompts turned off, the
system may occasionally ask you to confirm settings.
Media Candidate Lists
Candidate lists are possible results from your voice
commands. The system simply makes a best guess at
your request with these turned off.
Phone Candidate Lists
Candidate lists are possible results from your voice
commands. The system simply makes a best guess at
your request with these turned off.
Voice Control Volume
This allows you to adjust the system’s voice volume level.
1. Settings icon.
2. Settings.
3. Media Player.
Media Player
To access, press:
E142607
Then select from the following:
Media Player
Autoplay
When this feature is on, the system automatically switches
to the media source upon initial connection. This allows
you to listen to music during the indexing process. When
this feature is off, the system does not automatically
switch to the inserted media source.
Bluetooth Devices
Select to connect, disconnect, add or delete a device. You
can also set a device as your favorite so that the system
automatically attempts to connect to that device at every
ignition cycle.
Gracenote® Database Info
This allows you to view the version level of the Gracenote
Database.
Gracenote® Mgmt
With this feature on, the Gracenote Database supplies
metadata information for your music files. This overrides
information from your device. This feature defaults to off.
Cover Art Priority
With this feature on, the Gracenote Database supplied
cover art for your music files. This overrides any art from
your device. This feature defaults to Media Player.
305
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Navigation
1. Settings icon,
2. Settings,
3. Navigation,
To access, press:
E142607
Then select from the following:
Navigation
Map Preferences
Turn breadcrumbs on and off.
Have the system display your turn list top to bottom or
bottom to top.
Turn the Parking POI notification on and off.
Route Preferences
Select shortest route, fastest route or ecological route as
your preferred route. This route will be displayed first.
Always use preferred route. If set to yes, the system will
only calculate a single route. This speeds up your destination entry process.
Select a low, medium or high cost for the calculated
ecological route. This may incur a time penalty.
Have the system avoid freeways.
Have the system avoid tollroads.
Have the system avoid ferries or car trains.
Have the system use HOV (high-occupancy vehicle) lanes.
Navigation Preferences
Have the system use guidance prompts.
Have the system automatically fill-in State/Province
information.
Traffic Preferences
Have the system automatically avoid traffic concerns or
allow you to accept or decline an alternative route.
Have the system automatically alert you to traffic concerns
that occur on your route.
Have the system display areas where roadwork occurs.
Have the system display incident icons.
Have the system display areas where difficult driving
conditions may occur.
306
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Navigation
Have the system display areas with snow and ice on the
road may occur.
Have the system display any smog alerts.
Have the system display weather warnings.
Have the system display where there may be reduced
visibility.
Have the system turn on your radio for traffic announcements.
Avoid Areas
Enter specific areas that would like to avoid on planned
navigation routes.
1. Settings icon.
2. Settings.
3. Phone.
Phone
To access, press:
E142607
Then select from the following:
Phone
Bluetooth Devices
Connect, disconnect, add or delete a device, as well as
save it as a favorite.
Bluetooth
Turn Bluetooth on and off.
Do Not Disturb
Have all calls go directly to your voice mail and not ring
inside your vehicle. With this feature turned on, text
message notifications are also suppressed and do not ring
inside your vehicle.
911 Assist
Turn on or turn off the 911 Assist feature. See Information
(page 334).
Phone Ringer
Select the type of notification for phone calls - ring tone,
beep, text to speech, or have it be silent.
Text Message Notification
Select the type of notification for text messages - alert
tone, beep, text to speech, or have it be silent.
307
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Phone
Internet Data Connection
If compatible with your phone, you can adjust your internet
data connection. Select to make your connection profile
with the personal area network or to turn off your
connection. You can also choose to adjust your settings
or have the system always connect, never connect when
roaming or query on connect. Press ? for more information.
Manage Phonebook
Access features, such as automatic phonebook download,
re-download your phonebook, add contacts from your
phone as well as delete or upload your phonebook.
Roaming Warning
Have the system alert you when in Roaming mode.
To access, press:
Wireless & Internet
E142607
Your system has a Wi-Fi feature that
creates a wireless network within your
vehicle, thereby allowing other devices
(such as personal computers or phones)
in your vehicle to speak to each other,
share files or play games. Using this Wi-Fi
feature, everyone in your vehicle can also
gain access the internet if you have a USB
mobile broadband connection inside your
vehicle, your phone supports personal area
networking and if you park outside a
wireless hotspot.
1.
Settings icon.
2. Settings.
3. Wireless & Internet.
Then select from the following:
Wi-Fi
Wi-Fi Settings
Wi-Fi Network (Client) Mode turns the Wi-Fi feature on
and off in your vehicle. Make sure you turn it on for
connectivity purposes.
Choose a Wireless Network allows you to use a previously stored wireless network. You can categorize by
alphabetical listing, priority and signal strength. You can
also choose to search for a network, connect to a network,
disconnect from a network, receive more information,
prioritize a network or delete a network.
Gateway (Access Point) Mode makes SYNC an access
point for a phone or a computer when turned on. This
forms the local area network within your vehicle for things,
such as game playing, file transfer and internet browsing.
Press ? for more information.
308
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Wi-Fi
Gateway (Access Point) Settings allows you to view
and change settings for using SYNC as the internet
gateway.
Gateway (Access Point) Device List allows you to view
recent connections to your Wi-Fi system.
USB Mobile Broadband
Instead of using Wi-Fi, your system can also use a USB
mobile broadband connection to access the internet. (You
must turn on your mobile broadband device on your
personal computer before connecting it to the system.)
This screen allows you to set up what is your typical area
for your USB mobile broadband connection. (USB mobile
broadband settings may not display if the device is already
on.) You can select the following: Country, Carrier, Phone
Number, User Name and Password.
Bluetooth Settings
Shows you the currently paired devices as well as giving
you your typical Bluetooth options to connect, disconnect,
set as favorite, delete and add device. Bluetooth is a
registered trademark of the Bluetooth SIG.
Prioritize Connection
Methods
Choose your connection methods and change them as
needed. You can select to Change Order and have the
system either always attempt to connect using a USB
mobile broadband or using Wi-Fi.
The
Wi-Fi
Help
To access, press:
E142607
1. Settings icon.
2. Help.
E142626
Then select from the following:
CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
309
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Help
Where Am I?
View your vehicle's current location, if your vehicle is
equipped with navigation. If your vehicle is not equipped
with navigation, nothing displays.
System Information
Touchscreen system serial number
Your vehicle identification number (VIN)
Touchscreen system software version
Navigation system version
Map database version
Sirius satellite radio ESN
Gracenote® Database Information and Library version
Software Licenses
View the licenses for any software and applications
installed on your system.
Driving Restrictions
Certain features are not accessible when your vehicle is
moving.
911 Assist
Turn on and turn off the 911 Assist feature. See Information (page 334).
In Case of Emergency (ICE) Quick Dial: allows you to
save up to two numbers as ICE contacts for quick access
if there is an emergency. Select Edit to access your
phonebook and then select the desired contacts. The
numbers then appear as options on this screen for the ICE
1 and ICE 2 buttons. The ICE contacts you select appear
at the end of the 911 Assist call process.
Voice Command List
View categorized lists of voice commands.
To access Help using the voice commands,
press the voice button, then, after the tone,
say "Help". The system provides allowable
voice commands for the current mode.
310
Fiesta (CCT)
MyFord Touch™ (If Equipped)
ENTERTAINMENT
A
B
G
C
D
E
H
F
E161892
A
AM 1, AM 2 and AM AST
B
FM 1, FM 2 and FM AST
C
SIRIUS
D
CD
E
USB
F
Touch this button to scroll down for more options, such as SD Card, BT Stereo
and Line In
G
These buttons change with the media mode you are in.
H
Radio memory presets and CD controls.
Note: Some features may not be available
in your area. Contact an authorized dealer
for more information.
Browsing Device Content
When listening to any type of audio, you
can browse through other devices without
having to change sources. For example, if
you are currently listening to the radio, you
can browse all the artists that are stored
on your USB device.
You can access these options using the
touchscreen or voice commands.
E142599
311
Fiesta (CCT)
Press the voice icon on the
steering wheel. When prompted,
you can say:
MyFord Touch™ (If Equipped)
"BROWSE" within devices
*
"Browse"
**
"Browse <league> games"
**
"Browse <Sirius category> channels"
"Browse SD card"
**
"Browse Sirius channel guide"
"Browse USB"
"Help"
*
If you only say, "Browse", you can then say any commands in the following chart.
**
This command is only usable if you have an active subscription to SIRIUS® satellite
radio.
"BROWSE"
*
"<League> Games"
*
"<Sirius category> channels"
"SD card"
*
*
"Sirius Channel Guide"
"USB"
**
"Help"
*
This command is only usable if you have an active subscription to SIRIUS® satellite
radio.
**
For more commands in SD card or USB mode, see the "SD Card and USB Port" section
of this chapter.
To change between AM and FM presets,
just touch the AM or FM tab.
AM/FM Radio
Touch the AM or FM tab to listen
to the radio.
E142611
312
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Memory Presets
AST
Save a station by pressing and holding one
of the memory preset areas. There is a brief
mute while the radio saves the station.
Sound returns when finished.
AST (Autostore) allows you to have the
system automatically store the six
strongest stations in your current location.
TAG Button
HD Radio
This feature is available when HD Radio is
on, and allows you to tag a song to
download later. When you select On, TAG
appears on-screen when HD Radio is
active. You can touch TAG to save the
information of the song that is playing.
When you plug in your portable music
player, the information transfers, if
supported by your device. When you are
connected to iTunes®, the tags appear to
remind you of the songs you would like to
download. See HD Radio information later
in this chapter.
Touch this button to turn HD Radio on. The
light on the button illuminates when the
feature is on. HD Radio allows you to
receive radio broadcasts digitally, where
available, providing free, crystal-clear
sound. See HD Radio information later in
this chapter.
Scan
Touch this button to go to the next strong
AM or FM radio station. The light on the
button illuminates when the feature is on.
Direct Tune
Options
Touch this button to enter the desired
station number when prompted. Touch
Enter when you are done.
Sound Settings
Touch this button to adjust settings for:
•
•
•
•
•
•
•
HD Radio™ Information (If Available)
Bass
Midrange
Treble
Balance and Fade
DSP (Digital Signal processing)
Occupancy Mode
Speed Compensated Volume.
Note: HD Radio broadcasts are not
available in all markets.
HD Radio technology is the digital
evolution of analog AM/FM radio. Your
system has a special receiver that allows
it to receive digital broadcasts (where
available) in addition to the analog
broadcasts, it already receives. Digital
broadcasts provide a better sound quality
than analog broadcasts with free,
crystal-clear audio and no static or
distortion. For more information, and a
guide to available stations and
programming, please visit
www.hdradio.com.
Note: Your vehicle may not have all these
sound settings.
Set PTY for Seek/Scan
This allows you to select a category of
music you would like to search for. You can
then choose to either seek or scan for the
stations playing that category.
When HD Radio is on and you tune to a
station broadcasting HD Radio technology,
you may notice the following indicators on
your screen:
RDS Text Display
This allows you to view the information
broadcast by FM stations.
313
Fiesta (CCT)
MyFord Touch™ (If Equipped)
The system automatically saves the song's
information and transfers it to your
portable music player (if supported) when
you connect it to the system. The system
automatically transfers the tag to your
player (if already connected) and a pop-up
confirms the transfer.
When you access iTunes® with your
portable music player, the tags appear to
you as a reminder. The system allows you
to tag up to approximately 100 songs. For
a list of devices that support tagging, see
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
E142616
The HD Radio logo blinks when acquiring
a digital station and stays solid when
digital audio is playing. When this logo is
available, you may also see Title and Artist
fields on-screen.
The multicast indicator appears in FM
mode (only) if the current station is
broadcasting multiple digital broadcasts.
The highlighted numbers signify available
digital channels where new or different
content is available. HD1 signifies the main
programming status and is available in
analog and digital broadcasts. Other
multicast stations (HD2 through HD7) are
only available digitally.
When HD Radio broadcasts are active, you
can access the following functions:
• Scan allows you to hear a brief
sampling of all available stations. This
feature still works when HD Radio
reception is on, although it does not
scan for HD2-HD7 channels. You may
see the HD logo appear if the station
has a digital broadcast.
• Memory presets allow you to save an
active channel as a memory preset.
Touch and hold a memory preset slot
until the sound returns. There is a brief
mute while the radio saves the station.
Sound returns when finished. When
switching to an HD2 or HD3 memory
preset, the sound mutes before the
digital audio plays, because the system
has to reacquire the digital signal.
TAG allows you to save a song to
download later when you are on an
acquired HD Radio station and the feature
is on. To turn the feature on and use it,
press:
1.
2.
3.
4.
5.
AM or FM.
Options.
TAG Button.
On.
When you hear a song you like, press
TAG.
Note: As with any saved radio station, you
cannot access the saved station if your
vehicle is outside the station’s reception
area.
314
Fiesta (CCT)
MyFord Touch™ (If Equipped)
HD Radio Reception and Station Troubleshooting
Potential reception issues
Reception area
If you are listening to a multicast station and you are on
the fringe of the reception area, the station may mute due
to weak signal strength.
If you are listening to HD1, the system switches back to
the analog broadcast until the digital broadcast is available
again. However, if you are listening to any of the possible
HD2-HD7 multicast channels, the station mutes and stays
muted unless it is able to connect to the digital signal
again.
Station blending
When the system first receives a station (aside from HD2HD7 multicast stations), it first plays the station in the
analog version. Once the receiver verifies the station is an
HD Radio station, it shifts to the digital version. Depending
on the station quality, you may hear a slight sound change
when the station changes from analog to digital. Blending
is the shift from analog to digital sound or digital back to
analog sound.
In order to provide the best possible
experience, use the contact form to report
any station issues found while listening to
a station broadcasting with HD Radio
technology. Independent entities own and
operate each station. These stations are
responsible for ensuring all audio streams
and data fields are accurate.
315
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Potential station issues
Issues
Echo, stutter, skip or repeat
in audio.
Increase or decrease in
audio volume.
Cause
Action
This is poor time alignment No action required. This is a
by the radio broadcaster.
broadcast issue.
Sound fading or blending in The radio is shifting between No action required. The
and out.
analog and digital audio.
reception issue may clear up
as you continue to drive.
*
There is an audio mute
delay when selecting HD2 or
HD3, multicast preset or
Direct Tune.
The digital multicast is not No action required. This is
available until the HD Radio normal behavior. Wait until
broadcast is decoded. Once the audio is available.
decoded, the audio is available.
Cannot access HD2 or HD3
multicast channel when
recalling a preset or from a
direct tune.
The previously stored
No action required. The
multicast preset or direct
station is not available in
tune is not available in your your current location.
current reception area.
Text information does not
match currently playing
audio.
Data service issue by the
radio broadcaster.
Fill out the station issue
form at website listed
below.
*
There is no text information Data service issue by the
shown for currently selected radio broadcaster.
frequency.
Fill out the station issue
form at website listed
HD2-HD7 stations not found Pressing Scan disables
when Scan is pressed.
HD2-HD7 channel search.
No action required. This is
normal behavior.
below.
*
http://www.ibiquity.com/automotive/report_radio_station_experiences
Radio Voice Commands
HD Radio Technology manufactured under
license from iBiquity Digital Corp. U.S. and
foreign patents. HD Radio and the HD and
HD Radio logos are proprietary trademarks
of iBiquity Digital Corp. Ford Motor
Company and iBiquity Digital Corp. are not
responsible for the content sent using HD
Radio technology. Content may be
changed, added or deleted at any time at
the station owner's discretion.
If you are listening to the radio,
press the voice button on the
E142599
steering wheel controls. When
prompted, say any of the following
commands.
If you are not listening to the radio, press
the voice button and, after the tone, say
"Radio", then any of the following
commands.
316
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"RADIO"
"<87.9-107.9>"
"FM autoset preset <#>"
"FM preset <#>"
1
"<87.9-107.9> HD"
"<530-1710>"
"FM 1"
"AM"
"FM 1 preset <#>"
"AM <530-1710>"
"FM 2"
"AM autoset"
"FM 2 preset <#>"
"AM autoset preset <#>"
"HD <#>"
"AM preset <#>"
"Preset <#>"
"Browse"
1
"Radio off"
2
"FM"
"Radio on"
"FM <87.9-107.9>"
"Set PTY"
1
3
"FM <87.9-107.9> HD <#>"
"Tune"
"FM autoset"
"Help"
1
If available
2
If you have said "Browse", see the "Browse" chart later in this section.
3
If you have said "Tune", see the following "Tune" chart.
"TUNE"
"<530-1710>"
"FM autoset"
"<87.9-107.9> HD <#>"
"FM autoset preset <#>"
"AM"
"FM preset <#>"
"AM <530-1710>"
"FM1"
"AM preset <#>"
"FM1 preset <#>"
"AM autoset"
"FM2"
"AM autoset preset <#>"
"FM2 preset <#>"
*
317
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"TUNE"
"<87.9-107.9>"
"HD <#>"
"FM"
"Preset <#>"
"FM <87.9-107.9>"
"Help"
*
"FM <87.9-107.9> HD <#>"
*
If available
•
SIRIUS® Satellite Radio (If
Activated)
E142611
•
Press the lower left corner of the
touchscreen, and then select the
SIRIUS tab.
Scan
Memory Presets
Touch this button to hear a brief sampling
of channels.
Save a channel by pressing and holding
one of the memory preset areas. There is
a brief mute while the radio saves the
channel. Sound returns when finished.
Options
Touch this button to view and adjust
various media settings.
ALERT
Sound Settings
Save the current song, artist, or team as a
favorite. The system alerts you when it
plays again on any channel.
Touch this button to adjust settings for:
•
•
•
•
•
•
•
Replay
Replay audio on the current channel. You
can replay approximately 45 minutes of
audio as long as you have remained tuned
to the current station. Changing stations
erases the previous audio.
While in replay mode:
• Press and release the seek buttons to
hear the previous or next song.
• Press and hold the seek buttons to
reverse or fast forward in the current
track.
Bass
Midrange
Treble
Balance and Fade
DSP (Digital Signal processing)
Occupancy Mode
Speed Compensated Volume.
Note: Your vehicle may not have all these
sound settings.
Set Category for Seek/Scan
This allows you to select a category of
music you would like to search for. You can
then choose to either seek or scan for the
stations playing that category.
318
Fiesta (CCT)
Press play or pause to play or pause
the audio.
Press Replay to return to live audio if
you have been using the feature to
replay audio.
MyFord Touch™ (If Equipped)
Parental Lockout
Touch Title or Artist to see song and
artists on other stations.
This allows you to lock and unlock
channels, change or reset your PIN or
unlock all channels. To use this feature,
you need your initial PIN, which is 1234.
SIRIUS Satellite Radio Information
Note: SIRIUS reserves the unrestricted right
to change, rearrange, add or delete
programming including canceling, moving
or adding particular channels, and its prices,
at any time, with or without notice to you.
Ford Motor Company shall not be
responsible for any such programming
changes.
Artist/Title/Team Alerts
This feature allows you to select Artists,
Titles and Teams that you would like the
system to alert you to when they are
playing on other channels. Press Edit Alerts
to delete or turn off alerts. You can also
set all alerts to on or off. When an alert
appears on the screen, you can choose to
Tune to the channel, to Cancel the alert or
to Disable Alerts. If you are listening to a
sporting event, you can save your favorite
teams so that the system can alert you
when they are playing on a satellite radio
channel.
E142593
SIRIUS satellite radio is a
subscription-based satellite radio service
that broadcasts a variety of music, sports,
news, weather, traffic and entertainment
programming. Your factory-installed
SIRIUS satellite radio system includes
hardware and a limited subscription term
that begins on the date of sale or lease of
your vehicle. See an authorized dealer for
availability.
Note: SIRIUS does not support the Alert
feature on all channels. Ford Motor
Company shall not be responsible for Alert
feature variation.
Electronic Serial Number (ESN)
SIRIUS requires this number when
communicating with you about your
account.
For more information on extended
subscription terms (a service fee is
required), the online media player and a
list of SIRIUS satellite radio channels, and
other features, please visit
www.siriusxm.com in the United States,
www.sirius.ca in Canada, or call SIRIUS at
1-888-539-7474.
Direct Tune
Touch this button to enter the satellite
channel number when prompted. Touch
Enter when you are done.
Browse
Touch this button to view a list of all
available stations. Scroll to see more
categories. Touch the station you want to
listen to.
Note: This receiver includes the eCos
real-time operating system. eCos is
published under the eCos License.
Touch Skip if you want to skip this
channel.
Touch Lock if you do not want anyone to
listen to this channel.
319
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Satellite Radio Electronic Serial Number
(ESN)
ESN:XXXXXXXXXXXX). To access your
ESN, press the bottom left corner of the
touchscreen, then Press:
You need your ESN to activate, modify or
track your satellite radio account. The ESN
is on the System Information Screen (SR
1. SIRIUS.
2. Options.
SIRIUS Satellite Radio Reception Factors and Troubleshooting
Potential reception issues
Antenna obstructions
For optimal reception performance, keep the antenna
clear of snow and ice build-up and keep luggage and other
materials as far away from the antenna as possible.
Terrain
Hills, mountains, tall buildings, bridges, tunnels, freeway
overpasses, parking garages, dense tree foliage and
thunderstorms can interfere with your reception.
Station overload
When you pass a ground-based broadcast-repeating
tower, a stronger signal may overtake a weaker one and
the audio system may mute.
Satellite radio signal interfer- Your display may show ACQUIRING... to indicate the
ence
interference and the audio system may mute.
Troubleshooting tips
Radio display
Cause
Action
No action required. This
message should disappear
shortly.
Acquiring...
Radio requires more than
two seconds to produce
audio for the selected
channel.
Sat Fault/SIRIUS System
Failure.
There is an internal module If this message does not
or system failure present.
clear shortly, or with an ignition key cycle, your receiver
may have a fault. See an
authorized dealer for service.
Invalid Channel.
The channel is no longer
available.
Tune to another channel or
choose another preset.
Unsubscribed Channel.
Your subscription does not
include this channel.
Contact SIRIUS at 1-888539-7474 to subscribe to
the channel, or tune to
another channel.
320
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Troubleshooting tips
Radio display
Cause
Action
No Signal.
The signal is lost from the
SIRIUS satellite or SIRIUS
tower to your vehicle
antenna.
The signal is blocked. When
you move into an open area,
the signal should return.
Updating.
Update of channel
programming in progress.
No action required. The
process may take up to
three minutes.
Call SIRIUS
1-888-539-7474.
Your satellite service is no
longer available.
Contact SIRIUS at 1-888539-7474 to resolve
subscription issues.
No Channels Available.
All the channels in the
Use the channel guide to
selected category are either turn off the Lock or Skip
skipped or locked.
function on that station.
Subscription Updated.
SIRIUS has updated the
channels available for your
vehicle.
No action required.
If you are not listening to SIRIUS satellite
radio, press the voice button and, after the
tone, say "SIRIUS", then any of the
following commands.
SIRIUS Satellite Radio Voice
Commands
If you are listening to SIRIUS
satellite radio, press the voice
E142599
button on the steering wheel
controls. When prompted, say any of the
following commands.
"SIRIUS"
"<0-223>"
"SAT 2 preset <#>"
"<Channel name>"
"SAT 3"
"Preset <#>"
"SAT 3 preset <#>"
"SAT"
"SIRIUS off"
"SAT preset <#>"
"SIRIUS on"
"SAT 1"
"Sports game"
*
321
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"SIRIUS"
*
"SAT 1 Preset <#>"
"Tune"
"SAT 2"
"Help"
**
If you have said "Sports game", see the following "Sports game" chart.
**
If you have said "Tune", see the following "Tune" chart.
"SPORTS GAME"
"Tune to the <college name> game"
"Tune to the <team city> game"
"Tune to the <team city> <team name> game"
"Tune to the <team name> game"
"Help"
"TUNE"
"<0-223>"
"<Channel Name>"
"Preset <#>"
"SAT"
"SAT 1"
"SAT 1 preset <#>"
"SAT 2"
"SAT 2 preset <#>"
"SAT 3"
"SAT 3 preset <#>"
"Help"
322
Fiesta (CCT)
MyFord Touch™ (If Equipped)
CD
E142611
•
•
•
•
•
•
•
Press the lower left corner of the
touchscreen and press the CD
tab.
You can also advance and reverse the
current track or current folder, if applicable.
Repeat
Bass
Midrange
Treble
Balance and Fade
DSP (Digital Signal processing)
Occupancy Mode
Speed Compensated Volume.
Note: Your vehicle may not have all these
sound settings.
Touch this button to repeat the currently
playing track, all tracks on the disc or turn
the feature off if already on.
Compression
Touch this button to turn the compression
feature on and off.
Shuffle
Touch this button to play the tracks or
entire albums in random order, or turn the
feature off if already on.
Browse
Touch this button to look through all
available CD tracks.
Scan
Touch this button to hear a brief sampling
of all available tracks.
CD Voice Commands
If you are listening to a CD, press
the voice button on the steering
wheel controls. When prompted,
say any of the following commands.
More Info
E142599
Touch this button to see disc information.
If you are not listening to a CD, press the
voice button and, after the tone, say "CD",
then any of the following commands.
Options
Sound Settings
Touch this button to adjust settings for:
"CD"
"Pause"
"Play"
"Play next track"
"Play previous track"
"Play track <1-512>"
"Repeat"
*
"Repeat folder"
323
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"CD"
"Repeat off"
"Repeat track"
"Shuffle"
*
"Shuffle CD"
*
"Shuffle folder"
"Shuffle off"
"Help"
*
This applies to WMA or MP3 files only.
SD Card Slot and USB Port
SD Card
Note: Your SD card slot is spring-loaded.
To remove the SD card, press the card in
and the system ejects it. Do not attempt to
pull the card to remove it as this could cause
damage.
E142620
SD logo is a trademark of SD-3C, LLC.
Note: The navigation system also uses this
card slot. See Navigation (page 343).
USB Port
E142619
E142621
The SD card slot is located either in the
center console or behind a small access
door in the instrument panel. To access
and play music from your device, press the
lower left corner of the touchscreen.
The USB ports are located either in the
center console or behind a small access
door in the instrument panel. To access
and play music from your device, press the
lower left corner of the touchscreen.
324
Fiesta (CCT)
MyFord Touch™ (If Equipped)
•
•
•
•
•
This feature allows you to plug in media
playing devices, memory sticks, flash drives
or thumb drives, and charge devices if they
support this feature.
In order to playback video from your iPod®
or iPhone®, you must have a special
combination USB/RCA composite video
cable (which you can buy from Apple®).
When the cable is connected to your iPod®
or iPhone®, plug the other end into both
the RCA jacks and the USB port.
Note: Your vehicle may not have all these
sound settings.
Media Player Settings allows you to
select more settings, which is under Media
Player. See Settings (page 301).
Playing Music from Your Device
Device Information displays software
and firmware information about the
currently connected media device.
Insert your device and select the
SD Card or USB tab once the
E142611
system recognizes it. You can
then select from the following options:
Update Media Index indexes your device
each time you connect it to make sure you
have the latest voice commands available
for all media on the device.
Repeat
This feature replays the currently playing
song or album.
Browse
This feature allows you to view the
contents of the device. It also allows you
to search by categories, such as genre,
artist or album.
Shuffle
Touch this button to play music on the
selected album or folder in random order.
If you want to view song information such
as Title, Artist, File, Folder, Album, and
Genre, touch the on-screen album art.
Similar Music
This feature allows you to choose music
similar to what is currently playing.
You can also touch What’s Playing to
hear how the system pronounces the
current band and song. This can be helpful
when using voice commands to make sure
the system correctly plays your request.
More Info
Touch this button to see disc information
such as current track, artist name, album
and genre.
SD Card and USB Voice Commands
Options
If you are listening to a USB
device or an SD card, press the
E142599
voice button on the steering
wheel controls. When prompted, say any
of the following commands.
Touch this button to view and adjust
various media settings.
Sound Settings allows you to adjust
settings for:
• Bass
• Midrange
If you are not listening to a USB device or
an SD card, press the voice button and,
after the tone, say "USB" or "SD card",
then any of the following commands.
325
Fiesta (CCT)
Treble
Balance and Fade
DSP (Digital Signal processing)
Occupancy Mode
Speed Compensated Volume.
MyFord Touch™ (If Equipped)
"USB" or "SD CARD"
"Browse"
"Play podcast episode <name>"
*
"Next"
"Play similar music"
"Pause"
"Play song <name>"
"Play"
"Play TV show <name>"
"Play album <name>"
"Play TV show episode <name>"
"Play all"
"Play video <name>"
"Play artist <name>"
"Play video podcast episode <name>"
"Play audiobook <name>"
"Play video playlist <name>"
"Play author <name>"
"Previous"
"Play composer <name>"
"Repeat all"
**
**
"Play folder <name>"
"Repeat off"
"Play genre <name>"
"Repeat one"
"Play movie <name>"
**
**
**
"Shuffle"
**
"Play music video <name>"
"Shuffle off"
"Play playlist <name>"
"What's this?"
"Play podcast <name>"
"Help"
**
*
If you have said you would like to browse your USB or SD card, the system prompts you
to specify what you would like to browse. When prompted, see the following "Browse"
chart.
**
These commands are only available in USB mode and are device-dependent.
"BROWSE"
"Album <name>"
"All video podcasts"
"All albums"
"All videos"
"All artists"
"Artist <name>"
*
326
Fiesta (CCT)
*
MyFord Touch™ (If Equipped)
"BROWSE"
"All audiobooks"
"Audiobook <name>"
"All authors"
"Author <name>"
"All composers"
"Composer <name>"
"All folders"
"Folder <name>"
"All genres"
"Genre <name>"
"All movies"
"Playlist <name>"
*
"All music videos"
"All playlists"
"TV show <name>"
"All podcasts"
"Video <name>"
"All songs"
"Video playlist <name>"
"All TV shows"
*
*
*
"All video playlists"
*
"Podcast <name>"
*
*
"Video podcast <name>"
*
"Help"
*
These commands are only available in USB mode and are device-dependent.
In order to playback video from your iPod®
or iPhone®, you must have a special
combination USB/RCA composite video
cable (which you can buy from Apple®).
When the cable is connected to your iPod®
or iPhone®, plug the other end into both
the RCA jacks and the USB port.
Supported Media Players, Formats
and Metadata Information
SYNC is capable of hosting nearly any
digital media player, including iPod®,
Zune™, plays from device players, and
most USB drives. Supported audio formats
include MP3, WMA, WAV and AAC.
Bluetooth Audio
It is also able to organize your indexed
media from your playing device by
metadata tags. Metadata tags, which are
descriptive software identifiers embedded
in the media files, provide information
about the file.
Your system allows you to stream audio
over your vehicle's speakers from your
connected, Bluetooth-enabled cellular
phone.
If your indexed media files contain no
information embedded in these metadata
tags, SYNC may classify the empty
metadata tags as Unknown.
E142611
327
Fiesta (CCT)
To access, press the lower left
corner on the touchscreen, then
select the BT Stereo tab.
MyFord Touch™ (If Equipped)
Bluetooth Audio Voice Commands
"Pause", "Play" or "Previous song".
If you are listening to a Bluetooth
audio device, press the voice
E142599
button on the steering wheel
control. When prompted, say "Next song",
If you are not listening to a Bluetooth audio
device, press the voice button and, after
the tone, say "Next song", "Pause", "Play"
or "Previous song".
PHONE
A
B
C
D
E
F
E161968
A
Phone
B
Quick Dial
C
Phonebook
D
History
E
Messaging
F
Settings
At a minimum, most cellular phones with
Bluetooth wireless technology support the
following functions:
• Answering an incoming call
• Ending a call
• Using privacy mode
• Dialing a number
• Redialing
Hands-free calling is one of the main
features of SYNC®. Once you pair your
phone, you can access many options using
the touchscreen or voice commands. While
the system supports a variety of features,
many are dependent on your cellular
phone’s functionality.
328
Fiesta (CCT)
MyFord Touch™ (If Equipped)
•
•
Note: Select SYNC, and a six-digit PIN
appears on your device.
Call waiting notification
Caller ID.
3. If you are prompted to enter a PIN on
your device, it does not support Secure
Simple Pairing. To pair, enter the PIN
displayed on the touchscreen. Skip the
next step.
4. When prompted on your phone’s
display, confirm that the PIN provided
by SYNC matches the PIN displayed
on your cellular phone.
5. The display indicates when the pairing
is successful.
Other features, such as text messaging
using Bluetooth and automatic phonebook
download, are phone-dependent features.
To check your phone’s compatibility, see
your phone’s user manual and visit
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
Pairing Your Phone for the First
Time
WARNING
SYNC may prompt you with more phone
options. For more information on your
phone's capability, see your phone's
manual and visit the website.
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
Pairing Subsequent Phones
Note: Put the transmission in position P.
Turn on your vehicle ignition and the radio.
Make sure that Bluetooth is set to On and
that your cellular phone is in the proper
mode. See your device's manual if
necessary. To pair a subsequent phone,
press:
1.
2.
3.
4.
5.
The first thing you must do to use the
phone features of SYNC is to pair your
Bluetooth-enabled cellular phone with
SYNC. This allows you to use your phone
in a hands-free manner.
Note: Put the transmission in position P.
Turn on your vehicle ignition and the radio.
1.
Touch Add Phone in the upper left
corner of the touchscreen. Find SYNC
appears on the screen, and instructs
you to begin the pairing process from
your device.
2. Make sure that Bluetooth is set to On
and that your cellular phone is in the
proper mode. See your phone’s manual
if necessary.
SYNC may prompt you with more phone
options. For more information on your
phone's capability, see your phone's
manual and visit the website.
329
Fiesta (CCT)
Phone.
Settings.
BT Devices.
Add Device.
When prompted on your phone's
display, enter the six-digit PIN provided
by SYNC on the screen. The display
indicates when the pairing is
successful.
MyFord Touch™ (If Equipped)
Making Calls
Quick Dial
Press the voice button on the
steering wheel controls. When
E142599
prompted, say, "Call <name>"
or say "Dial", then the desired number.
Select and call contacts stored in your
phonebook contacts and call history folder.
Phonebook
Touch this button to access and call any
contacts in your previously downloaded
phone book. The system places the entries
in alphabetical categories summarized at
the top of the screen.
To end the call or exit phone
mode, press and hold the phone
button.
Receiving Calls
To turn on contact picture settings, if your
device supports this feature, press:
During an incoming call, an audible tone
sounds. Call information appears in the
display if it is available.
Accept the call by pressing
Accept on the touchscreen or
by pressing this phone button on
the steering wheel controls.
Reject the call by pressing
Reject on the touchscreen or by
pressing and holding this phone
button on the steering wheel controls.
Phone.
Settings.
Manage Phonebook.
Download photos from Phonebook.
On.
Certain smartphones may support
transferring street addresses when listed
with phone book contact information. If
your phone supports this feature, you can
select and use these addresses as
destinations and save them as favorites.
Ignore the call by doing nothing. SYNC logs
it as a missed call.
History
Phone Menu Options
After you connect your Bluetooth-enabled
phone to SYNC, you can access any
previously dialed, received or missed calls.
You can also choose to save these to your
Favorites or to Quick Dial.
Press the top left corner on your
touchscreen to select from the following
options:
Phone
Note: This is a phone-dependent feature.
If your phone does not support downloading
call history using Bluetooth, SYNC keeps
track of calls made with the SYNC system.
Touch this button to access the on-screen
numerical pad to enter a number and place
a call. During an active call, you can also
choose to:
• Mute the call
• Put the call on hold
• Turn on the privacy feature
• Join two calls
• End the call.
Messaging
Send text messages using your
touchscreen. See Text messaging later
in this section.
330
Fiesta (CCT)
1.
2.
3.
4.
5.
MyFord Touch™ (If Equipped)
Settings
•
•
•
Touch this button to access various phone
settings, such turning Bluetooth on and off,
managing your phonebook and more. See
Phone settings later in this section.
Send Text
View
Delete.
Composing a Text Message
Note: This is a speed-dependent feature.
It is unavailable when your vehicle is
traveling at speeds over 5 mph (8 km/h).
Text Messaging
Note: Downloading and sending text
messages using Bluetooth are
phone-dependent features.
Note: Downloading and sending text
messages using Bluetooth are
phone-dependent features.
Note: Certain features in text messaging
are speed-dependent and not available
when your vehicle is traveling at speeds over
3 mph (5 km/h).
1.
2.
3.
4.
Note: SYNC does not download read text
messages from your phone.
You can send and receive text messages
using Bluetooth, read them aloud and
translate text messaging acronyms, such
as LOL.
Press Phone .
Messaging.
Send Text.
Enter a phone number or choose from
your phonebook.
You can select from the following options:
• Send, which sends the message as it
is.
• Edit Text, which allows you to
customize the pre-defined message or
create a message on your own.
1.
Touch the top left corner of the display
to access the Phone menu.
2. Select Messaging.
3. Choose from the following:
• Listen (speaker icon)
• Dial
You can then preview the message, verify
the recipient as well as update the
message list, and send it to a connected
device (such as a USB drive).
Text message options
I’ll call you back in a few minutes.
I just left, I’ll be there soon.
Can you give me a call?
I’m on my way.
I’m running a few minutes late.
I’m ahead of schedule, so I’ll be there early.
I’m outside.
I’ll call you when I get there.
331
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Text message options
OK
Yes
No
Thanks
Stuck in traffic.
Call me later.
LOL
Bluetooth
Receiving a Text Message
Touch this tab to turn Bluetooth off or on.
Note: If you select View and your vehicle is
traveling over 3 mph (5 km/h), the system
offers to read the message to you instead
of allowing you to view it while driving.
Do Not Disturb
Touch this tab if you want all calls to go
directly to your voice mail and not ring in
the vehicle. When this feature is on, text
message notifications do not ring inside
the cabin either.
When a new message arrives, an audible
tone sounds and the screen displays a
pop-up with the caller name and ID, if
supported by your phone. You can press:
• View to view the text message.
• Listen for SYNC to read the message
to you.
• Dial to call the contact.
• Ignore to exit the screen.
911 Assist
Turn on or turn off the 911 Assist feature.
See Information (page 334).
Phone Ringer
Select the ring tone you want to hear when
you receive a call. Choose from possible
system ring tones, your currently paired
phone’s ring tone, a beep, text-to-speech
or a silent notification.
Phone Settings
To enter the phone settings menu press:
1. Phone.
2. Settings.
3. Choose from the following:
Text Message Notification
Select a text message notification, if
supported by your phone. Choose from
possible system alert tones,
text-to-speech or silent.
Bluetooth Devices
Touch this tab to connect, disconnect, add
or delete a device, as well as save it as a
favorite.
332
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Internet Data Connection
Manage Phonebook
If your phone is compatible, use this screen
to adjust your internet data connection.
Select to make your connection profile
with the personal area network or to turn
off your connection. You can also choose
to adjust your settings or have the system
always connect, never connect when
roaming or query on connect. Press ? for
more information.
Touch this button to access features such
as automatic phonebook download,
re-download your phonebook, add
contacts from your phone as well as delete
or upload your phonebook.
Roaming Warning
Touch this button to have the system alert
you when your phone is in roaming mode.
Phone Voice Commands
Press the voice button on the
steering wheel controls. When
prompted, say any of the
following commands:
E142599
"PHONE"
"Call"
"Join calls"
1
"Call <name>"
"Listen to text message <#>"
"Call <name> at home"
"Listen to text messages"
"Call <name> at work"
"Messages"
"Call <name> on cell"
"Mute call"
"Call <name> on other"
"Pair phone"
"Call voicemail"
"Privacy on"
2
1
1
"Dial"
"Read text message"
"Do not disturb off"
"Reply to text messages"
"Do not disturb on"
"Turn ringer off"
"Forward text messages"
"Turn ringer on"
"Go to hands free"
1
1
"Unmute call"
333
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"PHONE"
"Help"
1
"Hold call off"
"Hold on"
1
1
These commands are only available during an active call.
2
If you say "Messages", see the following "Messages" chart for additional commands.
"MESSAGES"
"Call"
"Forward text messages"
"Listen to text message <#>"
"Listen to text messages"
"Reply to text messages"
"Help"
INFORMATION
A
B
C
D
E
E161889
334
Fiesta (CCT)
MyFord Touch™ (If Equipped)
A
SYNC Services
B
SIRIUS Travel Link
C
Alerts
D
Calendar
E
SYNC Applications
Note: The driver is ultimately responsible
for the safe operation of the vehicle, and
therefore, must evaluate whether it is safe
to follow the suggested directions. Any
navigation features provided are only an aid.
Make your driving decisions based on your
observations of local conditions and existing
traffic regulations. Do not follow the route
suggestions if doing so would result in an
unsafe or illegal maneuver, if you would be
placed in an unsafe situation, or if you would
be directed into an area that you consider
unsafe. Maps used by this system may be
inaccurate because of errors, changes in
roads, traffic conditions or driving
conditions.
Under the Information menu, you can
access features such as:
• SYNC Services
• SIRIUS Travel Link
• Alerts
• Calendar
• SYNC Applications
If your vehicle is equipped with
Navigation, press the
E142608
Information button to access
these features. If your vehicle is not
equipped with Navigation, press the corner
of the touchscreen with the green tab.
Note: When you connect, the service uses
GPS technology and advanced vehicle
sensors to collect your vehicle's current
location, travel direction and speed to help
provide you with the directions, traffic
reports, or business searches you request.
Further, to provide the services you request,
for continuous improvement, the service
may collect and record call details and voice
communications. For more information, see
SYNC Services Terms and Conditions at
www.SYNCMyRide.com. If you do not want
Ford or its service providers to collect your
vehicle travel information or other
information identified in the Terms and
Conditions, do not subscribe or use the
service.
SYNC Services (If Equipped,
United States Only)
Note: SYNC Services requires activation
before use. Visit www.SYNCMyRide.com to
register and check your eligibility for
complimentary services. Standard phone
and message rates may apply. Subscription
may be required. You must also have the
active SYNC Services Bluetooth-enabled
cellular phone paired and connected to the
system in order to connect to, and use,
SYNC Services. See Phone (page 328).
Note: This feature does not function
properly if you have enabled caller ID
blocking on your cellular phone. Make sure
your cellular phone is not blocking caller ID
before using SYNC Services.
335
Fiesta (CCT)
MyFord Touch™ (If Equipped)
2. Once connected, follow the voice
prompts to request your desired
Service, such as "Traffic" or
"Directions". You can also say, "What
are my choices?" to receive a list of
available services from which to
choose.
3. Say, "Services" to return to the Services
main menu or for help, say, "Help".
SYNC Services uses advanced vehicle
sensors, integrated GPS technology and
comprehensive map and traffic data, to
give you personalized traffic reports,
precise turn-by-turn directions, business
search, news, sports, weather and more.
For a complete list of services, or to learn
more, please visit www.SYNCMyRide.com.
Connecting to SYNC Services Using
Voice Commands
Receiving Turn-by-Turn Directions
1.
When connected to SYNC Services,
say "Directions" or "Business search".
To find the closest business or type of
business to your current location, just
say "Business search" and then
"Search near me". If you need further
assistance in finding a location you can
say "Operator" at any time within a
Directions or Business search to speak
with a live operator. The system may
prompt you to speak with an operator
when it has difficulty matching your
voice request. The live operator can
assist you by searching for businesses
by name or by category, residential
addresses by street address or by
name or specific street intersections.
Operator Assist is a feature of your
SYNC Services subscription. For more
information on Operator Assist, visit
www.SYNCMyRide.com/support.
2. Follow the voice prompts to select your
Destination. After the route download
is finished, the phone call automatically
ends.
E142599
1. Press the voice button.
2. When prompted, say "Services". This
initiates an outgoing call to SYNC
Services using your paired and
connected Bluetooth-enabled cellular
phone.
3. Once you connect to the service, follow
the voice prompts to request the
desired service, such as "Traffic" or
"Directions". You can also say, "What
are my choices?" to receive a list of
available services from which to
choose.
4. Say, "Services" to return to the Services
main menu or for help, say, "Help".
Connecting to SYNC Services Using
the Touchscreen
E142608
If your vehicle is equipped with
Navigation, press the
Information button.
If your vehicle is not equipped with
Navigation, press the green tab on your
touchscreen.
1.
Select Connect to Services to initiate
an outgoing call to SYNC Services
using your phone.
336
Fiesta (CCT)
MyFord Touch™ (If Equipped)
If you miss a turn, SYNC automatically asks
if you want the route updated. Just say,
"Yes" when prompted and the system
delivers a new route to your vehicle.
If your vehicle is not equipped with
Navigation:
• Turn-by-turn directions appear in the
information display, in the status bar
of your touchscreen system and on the
SYNC Services screen. You also receive
driving instructions from audible
prompts.
• When on an active route, you can
select Route Summary or Route
Status using the touchscreen controls
or voice commands to view the Route
Summary Turn List or the Route
Status ETA. You can also turn voice
guidance on or off, cancel the route or
update the route.
If your vehicle is equipped with Navigation,
SYNC Services downloads your requested
destination to the navigation system. The
navigation system then calculates the
route and provides driving instructions.
See Navigation (page 343).
Disconnecting from SYNC Services
1.
Press and hold the hang-up phone
button on the steering wheel.
2. Say "Good-bye" from the SYNC
Services main menu.
SYNC Services quick tips
Personalizing
You can personalize your Services feature to provide
quicker access to your most used or favorite information.
You can save address points, such as work or home. You
can also save favorite information like sports teams, such
as Detroit Lions, or a news category. You can learn more
about personalization by logging onto
www.SYNCMyRide.com.
Push to interrupt
Press the voice button at any time (while connected to
SYNC Services) to interrupt a voice prompt or an audio
clip (such as a sports report) and say your voice command.
Portable
Your subscription is associated with your Bluetoothenabled cellular phone number, not your VIN (Vehicle
Identification Number). You can pair and connect your
phone to any vehicle equipped with SYNC Services and
continue enjoying your personalized services.
SYNC Services Voice Commands
"SERVICES"
When a route has been
downloaded (non-navigation
E142599
systems), press the voice button
on the steering wheel controls. When
prompted, say any of the following
commands:
"Cancel route"
"Navigation voice off"
"Navigation voice on"
"Next turn"
337
Fiesta (CCT)
MyFord Touch™ (If Equipped)
When you subscribe to SIRIUS Travel Link,
it can help you locate the best gas prices,
find movie listings, get current traffic alerts,
view the current weather map, get
accurate ski conditions and see scores to
current sports games.
"SERVICES"
"Route status"
"Route summary"
"Services"
If your vehicle is equipped with
Navigation, touch the i
(Information) button to access
these features. If your vehicle is not
equipped with Navigation, touch the corner
of the touchscreen with the green tab.
"Update route"
E142608
"Help"
SIRIUS Travel Link (If Equipped)
WARNING
Traffic On Route and Traffic Nearby
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
Touch these buttons to identify traffic
incidents on your route, nearby your
vehicle’s current location or near any of
your favorite places, if programmed.
Fuel Prices
Touch this button to view fuel prices at
stations close to your vehicle’s location or
on an active navigation route.
Movie Listings
Touch this button to view nearby movie
theaters and their show times, if available.
Note: In order to use SIRIUS Travel Link,
your vehicle must be equipped with
navigation and your navigation SD card
must be in the SD card slot.
Weather
Touch this button to view the nearby
weather, current weather, or the five day
forecast for the chosen area. Select Map
to see the weather map, which can show
storms, radar information, charts and
winds. Select Area to select from a listing
of weather locations.
Note: A paid subscription is required to
access and use these features. Go to
www.siriusxm.com/travellink for more
information.
Note: Visit www.siriusxm.com/traffic# and
click on Coverage map and details for a
complete listing of all traffic areas covered
by SIRIUS Travel Link.
Sports Info
Touch this button to view scores and
schedules from a variety of sports. You can
also save up to 10 favorite teams for easier
access. The score automatically refreshes
when a game is in progress.
Note: Neither SIRIUS nor Ford is responsible
for any errors or inaccuracies in the SIRIUS
Travel Link services or its use in vehicles.
338
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Ski Conditions
Sports-related commands
Touch this button to view ski conditions
for a specific area.
"My teams"
"NBA"
SIRIUS Travel Link Voice Commands
"NFL"
Press the voice button on the
steering wheel controls. When
E142599
prompted, say any of the
following commands:
"NHL"
"WNBA"
"Help"
"SIRIUS TRAVEL LINK"
Additional sports-related voice
commands
"5-day weather forecast"
"Fuel prices"
"Baseball headlines"
"Movie listings"
"Sports headlines"
"Baseball schedule"
*
"Sports schedules"
"Baseball scores"
*
"College basketball headlines"
"College basketball schedule"
*
"Sports scores"
"Traffic"
"College basketball scores"
"Weather"
"College football headlines"
"Weather map"
"College football schedule"
"Help"
"College football scores"
"Golf headlines"
*
If you say "Sports headlines", "Sports
schedules" or "Sports scores", you can
then say any of the commands in the
following chart.
"Golf leaderboard"
"Golf schedule"
"MLS headlines"
Sports-related commands
"MLS schedule"
"Baseball"
"MLS scores"
"College basketball"
"Motor sports headlines"
"College football"
"Motor sports order"
"Golf"
"Motor sports schedule"
"MLS"
"My team headlines"
339
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Note: The system alerts you to any
messages by turning the information icon
yellow. After you read or delete the
messages, the icon returns to white.
Additional sports-related voice
commands
"My teams schedule"
Calendar
"My teams scores"
"NBA headlines"
If your vehicle is equipped with
Navigation, touch the i
E142608
(Information) button to access
these features. If your vehicle is not
equipped with Navigation, touch the corner
of the touchscreen with the green tab.
"NBA schedule"
"NBA scores"
"NFL headlines"
"NFL schedule"
Press Calendar. You can view the current
calendar by day, week or month.
"NFL scores"
911 Assist (If Equipped)
"NHL headlines"
WARNINGS
Unless the 911 Assist setting is set on
before a crash, the system will not
dial for help, which could delay
response time, potentially increasing the
risk of serious injury or death after a crash.
"NHL schedule"
"NHL scores"
"WNBA headlines"
"WNBA schedule"
Do not wait for 911 Assist to make an
emergency call if you can do it
yourself. Dial emergency services
immediately to avoid delayed response
time, which could increase the risk of
serious injury or death after a crash. If you
do not hear 911 Assist within five seconds
of the crash, the system or phone may be
damaged or non-functional.
"WNBA scores"
"Help"
Alerts
If your vehicle is equipped with
Navigation, touch the i
E142608
(Information) button to access
these features. If your vehicle is not
equipped with Navigation, touch the corner
of the touchscreen with the green tab.
Always place your phone in a secure
location in your vehicle so it does not
become a projectile or damaged in
a crash. Failure to do so may cause serious
injury to someone or damage the phone,
which could prevent 911 Assist from
working properly.
Press Alerts, and then choose from any
of the following services:
• View the complete message.
• Delete the message.
• Delete All messages.
Note: The SYNC 911 Assist feature must be
set on prior to the incident.
This screen displays any system messages
(such as an SD card fault).
340
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Note: Before setting this feature on, make
sure that you read the 911 Assist Privacy
Notice later in this section for important
information.
You can also access 911 Assist
by:
E142607
•
Note: If any user turns 911 Assist on or off,
that setting applies for all paired phones. If
911 Assist is turned off, either a voice
message plays or a display message (or
icon) comes on (or both) when your vehicle
is started after a previously paired phone
connects.
•
To make sure that 911 Assist works
properly:
• SYNC must be powered and working
properly at the time of the incident and
throughout feature activation and use.
• The 911 Assist feature must be set on
prior to the incident.
• You must pair and connect a
Bluetooth-enabled and compatible
phone to SYNC.
• A connected Bluetooth-enabled phone
must have the ability to make and
maintain an outgoing call at the time
of the incident.
• A connected Bluetooth-enabled phone
must have adequate network coverage,
battery power and signal strength.
• The vehicle must have battery power
and be located in the United States,
Canada or in a territory in which 911 is
the emergency number.
Note: Every phone operates differently.
While SYNC 911 Assist works with most
cellular phones, some may have trouble
using this feature.
If a crash deploys an airbag (excludes knee
airbags and rear inflatable safety belts [if
equipped]) or activates the fuel pump
shut-off, your SYNC-equipped vehicle may
be able to contact emergency services by
dialing 911 through a paired and connected
Bluetooth-enabled phone. You can learn
more about the 911 Assist feature, visit
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
See Supplementary Restraints System
(page 34). Important information
regarding airbag deployment is in this
chapter.
In the Event of a Crash
See Roadside Emergencies (page 166).
Important information regarding the fuel
pump shut-off is in this chapter.
Not all crashes deploy an airbag or activate
the fuel pump shut-off (which would
trigger 911 Assist); however, SYNC tries to
contact emergency services if 911 Assist
triggers. If a connected phone sustains
damage or loses connection to SYNC,
SYNC searches for, and tries to connect
to, any available previously paired phone
and tries to make the call to 911.
Setting 911 Assist On
If your vehicle is equipped with
Navigation, touch the i
(Information) button to access
these features. If your vehicle is not
equipped with Navigation, touch the corner
of the touchscreen with the green tab.
E142608
Touch Apps > 911 Assist, then select On.
341
Fiesta (CCT)
Pressing the Settings icon > Settings
> Phone > 911 Assist, or
Pressing the Settings icon > Help > 911
Assist.
MyFord Touch™ (If Equipped)
Vehicle Health Report (If Equipped)
Before making the call:
• SYNC provides a short window of time
(about 10 seconds) to cancel the call.
If you fail to cancel the call, SYNC
attempts to dial 911.
• SYNC says the following, or a similar
message: "SYNC will attempt to call
911, to cancel the call, press Cancel on
your screen or press and hold the
phone button on your steering wheel."
WARNING
Always follow scheduled
maintenance instructions, regularly
inspect your vehicle, and seek repair
for any damage or problem you suspect.
Vehicle Health Report supplements, but
cannot replace, normal maintenance and
vehicle inspection. Vehicle Health Report
only monitors certain systems
electronically monitored by your vehicle
and will not monitor or report the status
of any other system, (such as brake lining
wear). Failure to perform scheduled
maintenance and regularly inspect your
vehicle may result in vehicle damage and
serious injury.
If you do not cancel the call, and SYNC
makes a successful call, a pre-recorded
message plays for the 911 operator, and
then the occupant(s) in your vehicle is able
to talk with the operator. Be prepared to
provide your name, phone number and
location immediately, because not all 911
systems are capable of receiving this
information electronically.
Note: This feature is only available in the
United States.
911 Assist May Not Work If
•
•
•
Note: Your Vehicle Health Report feature
requires activation prior to use. Visit
www.SYNCMyRide.com to register. There
is no fee or subscription associated with
Vehicle Health Report, but you must register
to use this feature.
Your cellular phone or 911 Assist
hardware sustains damage in a crash.
The vehicle's battery or the SYNC
system has no power.
The phone(s) thrown from your vehicle
are the ones paired and connected to
the system.
Note: This feature may not function
properly if you have enabled caller ID
blocking on your cellular phone. Before
running a report, review the Vehicle Health
Report Privacy Notice.
911 Assist Privacy Notice
When you turn on 911 Assist, it may
disclose to emergency services that your
vehicle has been in a crash involving the
deployment of an airbag or activation of
the fuel pump shut-off. Certain versions or
updates to 911 Assist may also be capable
of electronically or verbally disclosing to
911 operators your vehicle location or other
details about your vehicle or crash to assist
911 operators to provide the most
appropriate emergency services. If you do
not want to disclose this information, do
not turn the feature on.
Note: In order to allow a break-in period for
your vehicle, you may not be able to create
a Vehicle Health Report until your vehicle
odometer has reached 200 miles.
Note: Cellular phone and SMS charges may
apply when making a report.
342
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Register for Vehicle Health Report and set
your report preferences at
www.SYNCMyRide.com. After registering,
you can request a Vehicle Health Report
(inside your vehicle). Return to your
account at www.SYNCMyRide.com to view
your report. You can also choose for SYNC
to remind you automatically to run reports
at specific mileage intervals. Cellular phone
airtime usage may apply when reporting.
use your vehicle information it collects for
any purpose. If you do not want to disclose
your cellular phone number or vehicle
information, do not run the feature or set
up your Vehicle Health Report profile at
www.SYNCMyRide.com. See
www.SYNCMyRide.com (Vehicle Health
Report Terms and Conditions, and Privacy
Statement) for more information.
The system allows you to check your
vehicle’s overall health in the form of a
diagnostic report card. The Vehicle Health
Report contains valuable information, such
as:
• Vehicle diagnostic information
• Scheduled maintenance
• Open recalls and Field Service Actions
• Items noted during vehicle inspections
by your authorized dealer that still need
servicing.
NAVIGATION
Note: The navigation SD card must be in
the SD card slot to operate the navigation
system. If you need a replacement SD card,
see an authorized dealer.
Note: The SD card slot is spring-loaded. To
remove the SD card, just push the card in
and release it. Do not attempt to pull the
card out to remove it; this could cause
damage.
For SD card slot location: See
Entertainment (page 311).
Making a Report
E142608
Your navigation system is comprised of
two main features, destination mode and
map mode.
If you want to run a report by
using the touchscreen, touch
Apps > Vehicle Health Report.
To set a destination, press the green corner
of your touchscreen, then the Dest button
when it appears. See Setting a
destination later in this chapter.
To run a report by voice
command, press the voice
E142599
button on the steering wheel
and, when prompted, say "Vehicle health
report".
To view the navigation map and your
vehicle's current location, touch the green
bar in the upper right hand corner of the
touchscreen, or, press Dest, then Map. See
Map mode later in this chapter.
Vehicle Health Report Privacy Notice
When you create a Vehicle Health Report,
Ford Motor Company may collect your
cellular phone number (to process your
report request) and diagnostic information
about your vehicle. Certain versions or
updates to Vehicle Health Report may also
collect more vehicle information. Ford may
Setting a Destination
Press the green corner of your touchscreen,
then the Dest button when it appears.
Choose any of the following:
343
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Destination
My Home
Street Address
Favorites
Intersection
Previous Destinations
City Center
Point of Interest (POI)
Map
Emergency
Edit Route Cancel Route
You can cancel the route or have the
system demo the route for you. Select
Route Prefs to set route preferences like
avoiding freeways, tollroads, ferries and
car trains as well as to use or not use
high-occupancy vehicle lanes.
(High-occupancy vehicle lanes also known
as carpool or diamond lanes. People who
ride in buses, vanpools or carpools use
these lanes.)
1.
Enter the necessary information into
the highlighted text fields (in any
order). For address destination entry,
the Go! button appears once all the
necessary information has been
entered. Pressing the Go! button
makes the address location appear on
the map. If you choose Previous
Destination, the last 20 destinations
you have selected appear.
2. Select Set as Dest to make this your
destination. You can also choose to set
this as a waypoint (have the system
route to this point on the way to your
current destination) or save it as a
favorite. The system considers any
Avoid Areas selections in its route
calculation.
3. Choose from up to three different types
of routes, and then select Start Route.
• Fastest: Uses the fastest moving roads
possible.
• Shortest: Uses the shortest distance
possible.
• Eco Route: Uses the most fuel-efficient
route.
Note: If your vehicle is on a recognized road
and you do not press the Start Route
button, the system defaults to the Fastest
Route option and begins guidance.
During route guidance, you can press the
talking bubble icon that appears in the
upper right navigation corner (green bar)
if you want the system to repeat route
guidance information. When the system
repeats the last guidance instruction, it
updates the distance to the next guidance
instruction, since it detects when the
vehicle is moving.
344
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Point of Interest (POI) Categories
Main Categories
Food/Drink & Dining
Automotive
Travel & Transportation
Shopping
Financial
Entertainment & Arts
Emergency
Recreation & Sports
Community
Government
Health & Medicine
Domestic Services
Subcategories
Restaurant
Golf
Parking
Home & Garden
Personal Care Services
Auto Dealership
Government Office
Public Transit
Education
Pressing the Search By Name button
allows you to directly enter the point of
interest name into the system by using the
keyboard.
To expand these listings, press the + in
front of the listing.
When programming a point of interest
destination, the system allows you to sort
the resulting lists alphabetically, by
distance or by cityseekr listings (if
available).
cityseekr
Note: cityseekr point of interest information
is limited to approximately 912 cities (881
in the U.S., 20 in Canada and 11 in Mexico).
Pressing the Search Area button allows
you to search for points of interest nearby,
near a city or state or near a destination, if
a route is active.
345
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Attraction
E142639
This icon appears when your
selection exists in multiple
categories within the system.
E142634
E142640
cityseekr, when available, is a service that
provides more information about certain
points of interest such as restaurants,
hotels and attractions.
When you are viewing more information
for hotels, cityseekr also tells you if the
hotel has certain services and facilities
using icons.
When you have selected a point of interest,
the location and information appear, such
as address and phone number. If cityseekr
lists the point of interest, more information
is available, such as a brief description,
hotel check-in and checkout times or
restaurant hours.
For restaurants, cityseekr can provide
information such as star rating, average
cost, review, handicap access, hours of
operation, and website address.
For hotels, cityseekr can provide
information such as star rating, price
category, review, check in/out times, hotel
service icons and website address.
Press More Information for a longer
review, a list of services and facilities, the
average room or meal price as well as the
website link.
Setting Your Navigation
Preferences
This screen displays either a facility photo
(if available) or point of interest icons, such
as:
Select settings for the system to take into
account when planning your route.
To access, press:
Hotel
E142607
1. Settings icon.
2. Settings.
3. Navigation.
E143884
Coffeehouse
Map Preferences
E142636
Breadcrumbs
Food & Drink
Display your vehicle’s previously traveled
route with white dots. Turn this feature ON
or OFF.
E142637
Nightlife
Turn List Format
Have the system display your turn list Top
to Bottom or Bottom to Top.
E142638
346
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Parking POI Notification
Auto - Fill State/Province
Set the automatic parking points of
interest notification. Turn this feature ON
or OFF. When parking points of interest
notification is on, the icons display on the
map when you get close to your
destination. This may not be very useful in
dense areas, and may clutter the map
when other points of interest display.
Have the system automatically fill in the
state and province based on the
information already entered into the
system. Turn this feature ON or OFF.
Traffic Preferences
Avoid Traffic Problems
Choose how you want the system to
handle traffic problems along your route.
• Automatic: Have the system reroute
you to avoid traffic incidents that
develop and impact the current route.
The system does not provide a traffic
alert notification.
• Manual: Have the system always
provide a traffic alert notification for
traffic incidents along the planned
route. You have a choice to accept or
ignore the notification before making
the route deviation.
Route Preferences
Preferred Route
Choose to have the system display the
Shortest, Fastest or most Ecological route.
Always Use Preferred Route
Bypass route selection in destination
programming. The system only calculates
one route based on preferred route
settings.
Eco Time Penalty
Traffic Alert Notification
Select a low, medium or high cost for the
calculated Eco Route. The higher the
setting, the longer the time allotment is for
the route.
Have the system display traffic alert
notifications.
Other traffic alert features allows you to
turn on certain, or all, traffic icons on the
map such as road work, incident, accidents
and closed roads. Scroll down to view all
the different types of alerts. Turn these
features ON or OFF.
Avoid
These features allow you to choose to
have the system avoid freeways, toll roads,
ferries and car trains when planning your
route. Turn these features ON or OFF.
Avoid Areas
Use HOV Lanes
Choose areas which you want the system
to avoid when calculating a route for you.
Have the system use high-occupancy
vehicle lanes, if available, when planning
your route.
Press Add to program an entry. Once you
make a selection, the system tries to avoid
the area(s) if possible for all routes. To
delete a selection, choose the listing on
the screen. When the screen changes to
Avoid Areas Edit, you can press Delete
at the bottom right of the screen.
Navigation Preferences
Guidance Prompts
Have the system use Voice & Tones or
Tone Only on your programmed route.
347
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Map Mode
Press the green bar in the upper right area
of the touchscreen to view map mode. Map
mode shows advanced viewing comprised
of both 2D city maps as well as 3D
landmarks (when available).
E142643
North up (2D map) always shows
the northern direction to be
upward on the screen.
3D map mode provides an
elevated perspective of the map.
This viewing angle can be adjusted
E142644
and the map can be rotated 180
degrees by touching the map twice, and
then dragging your finger along the shaded
bar with arrows at the bottom of the map.
2D city maps show detailed outlines of
buildings, visible land use and land
elements and detailed railway
infrastructure for the most essential cities
around the globe. These maps also contain
features, such as town blocks, building
footprints, and railways.
View toggles between full map, street list
and exit view in route guidance.
Menu allows access to navigation settings,
view or edit route, SIRIUS Travel Link,
guidance mute and cancel route.
3D landmarks appear as clear, visible
objects that are typically recognizable and
have a certain tourist value. The 3D
landmarks appear in 3D map mode only.
Coverage varies, and improves with
updated map releases.
Re-centering the map by
pressing this icon whenever you
E146188
scroll the map away from your
vehicle’s current location.
Auto Zoom
Press the green bar to access map mode,
then select the + or - zoom button to bring
up the zoom level and Auto buttons on the
touchscreen. When you press Auto, Auto
Zoom turns on and Auto displays in the
bottom left corner of the screen in the map
scale. The map zoom level then
synchronizes with vehicle speed. The
slower your vehicle is traveling, the farther
in the map zooms; the faster your vehicle
is traveling, the farther the map zooms out.
To turn the feature off, just press the + or
- button again.
E162051
Change the appearance of the map display
by repeatedly pressing the arrow button in
the upper left corner of the screen. It
toggles between three different map
modes: Heading up, North up, and 3D.
In 3D mode, rotate the map view by
swiping your finger across the shaded bar
with the arrows.
Heading up (2D map) always
shows the direction of forward
travel to be upward on the screen.
E142642
This view is available for map
scales up to 2.5 miles (4 kilometers). The
system remembers this setting for larger
map scales, but shows the map in North
up only. If the scale returns below this level,
the system restores Heading up.
Map Icons
E142646
348
Fiesta (CCT)
Vehicle mark shows the current
location of your vehicle. It stays
in the center of the map display,
except when in scroll mode.
MyFord Touch™ (If Equipped)
Scroll cursor allows you to scroll
the map; the fixed icon is in the
center of the screen. The map
E142647
position closest to the cursor is in
a window on the top center part of the
screen.
No GPS symbol indicates that
insufficient GPS satellite signals
are available for accurate map
E142655
positioning. This icon may display
under normal operation in an area with
poor GPS access.
Address book entry default
icon(s) indicates the location on
the map of an address book entry.
E142648
This is the default symbol shown
after the entry has been stored to the
Address Book by any method other than
the map. You can select from any of the
22 icons available. You can use each icon
more than once.
Quick-touch Buttons
When in map mode, touch anywhere on
the map display to access the following
options:
Set as Dest
Touch this button to select a scrolled
location on the map as your destination.
You may scroll the map by pressing your
index finger on the map display. When you
reach the desired location, simply let go
and then touch Set as Dest.
Home indicates the location on
the map currently stored as the
home position. You can only save
E142649
one address from the Address
Book as your Home entry. You cannot
change this icon.
Set as Waypoint
Touch this button to set the current
location as a waypoint.
POI (Point Of Interest) icons
indicate locations of any point of
interest categories you choose to
E142650
display on the map. You can
choose to display three point of interest
categories on the map at one time.
Save to Favorites
Touch this button to save the current
location to your favorites.
Starting point indicates the
starting point of a planned route.
POI Icons
Touch this button to select icons to display
on the map. You can select up to three
icons to display on the map at the same
time. Turn these ON or OFF.
E142651
Waypoint indicates the location
of a waypoint on the map. The
number inside the circle is different
E142652
for each waypoint and represents
the position of the waypoint in the route
list.
Cancel Route
Touch this button to cancel the active
route.
Destination symbol indicates the
ending point of a planned route.
View/Edit Route
Next maneuver point indicates
the location of the next turn on the
planned route.
Access these features when a route is
active:
• View Route
• Edit Destination/Waypoints
E142653
E142654
349
Fiesta (CCT)
MyFord Touch™ (If Equipped)
•
•
•
•
•
Navigation Map Updates
Edit Turn List
Detour
Edit Route Preferences
Edit Traffic Preferences
Cancel Route.
Annual navigation map updates are
available for purchase through your
dealership, by calling 1-800-NAVMAPS (in
Mexico, call 01-800-557-5539) or going
to www.navigation.com/ford. You need to
specify the make and model of your vehicle
to determine if there is an update available.
Navteq is the digital map provider for the
navigation application. If you find map data
errors, you may report them directly to
Navteq by going to
http://mapreporter.navteq.com. Navteq
evaluates all reported map errors and
responds with the result of their
investigation by e-mail.
Navigation Voice Commands
When in navigation mode, press
the voice button on the steering
wheel controls. After the tone,
say any of the following commands:
E142599
Navigation System Voice Commands
"Cancel next waypoint"
1
"Navigation"
1
"Cancel route"
3
"Repeat instruction"
"Destination"
"Show 3D"
"Destination <nametag>"
"Show heading up"
"Destination <POI category>"
"Show map"
"Destination favorites"
"Show north up"
"Destination home"
"Show route"
"Destination intersection"
"Show turn list"
"Destination nearest <POI category>"
"Voice off"
2
1
1
1
"Destination nearest POI"
"Voice on"
"Destination play nametags"
"Voice volume decrease"
"Destination POI"
"Voice volume increase"
"Destination POI category"
"Where am I?"
"Destination previous destination"
"Zoom in"
350
Fiesta (CCT)
MyFord Touch™ (If Equipped)
Navigation System Voice Commands
"Destination street address"
"Zoom out"
"Help"
1
"Detour"
1
These commands are only available when a navigation route is active.
2
If you say "Destination", you can then say any command in the following "Destination"
chart.
3
If you say "Navigation", you can then say any command in the following "Navigation"
chart.
"DESTINATION"
"<nametag>"
"<POI category>"
"Favorites"
"Home"
"Intersection"
"Nearest <POI category>"
"Nearest POI"
"Play nametags"
"POI category"
"Previous destination"
"Street address"
"Help"
"NAVIGATION"
"Destination"
*
"Zoom city"
"Zoom country"
"Zoom minimum"
351
Fiesta (CCT)
MyFord Touch™ (If Equipped)
"NAVIGATION"
"Zoom maximum"
"Zoom province"
"Zoom state"
"Zoom street"
"Zoom to <distance>"
"Help"
*
If you say "Destination", you can then say any command in the "Destination" chart.
One-shot Destination Street Address
If your vehicle is equipped with the SD card
navigation feature, you have the ability to
enter in a street address using a feature
called one-shot street address. When you
say either "Navigation destination street
address" or "Destination street address",
the system asks you to say the full address.
The system displays an example
on-screen. You can then speak the address
naturally, such as "One two three four Main
Street, Anytown".
352
Fiesta (CCT)
Appendices
•
END USER LICENSE
AGREEMENT
SYNC® End User License
Agreement (EULA)
•
•
You have acquired a device ("DEVICE")
that includes software licensed by Ford
Motor Company and its affiliates
("FORD MOTOR COMPANY") from an
affiliate of Microsoft Corporation
("MS") . Those installed software
products of MS origin, as well as
associated media, printed materials,
and "online" or electronic
documentation ("MS SOFTWARE")
are protected by international
intellectual property laws and treaties.
The MS SOFTWARE is licensed, not
sold. All rights reserved.
The MS SOFTWARE may interface with
and/or communicate with, or may be
later upgraded to interface with and/or
communicate with additional software
and/or systems provided by FORD
MOTOR COMPANY. The additional
software and systems of FORD
MOTOR COMPANY origin, as well as
associated media, printed materials,
and "online" or electronic
documentation ("FORD SOFTWARE")
are protected by international
intellectual property laws and treaties.
The FORD SOFTWARE is licensed, not
sold. All rights reserved.
•
IF YOU DO NOT AGREE TO THIS END
USER LICENSE AGREEMENT ("EULA")
DO NOT USE THE DEVICE OR COPY
THE SOFTWARE. ANY USE OF THE
SOFTWARE, INCLUDING BUT NOT
LIMITED TO USE ON THE DEVICE, WILL
CONSTITUTE YOUR AGREEMENT TO
THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE: This
EULA grants you the following license:
•
353
Fiesta (CCT)
The MS SOFTWARE and/or FORD
SOFTWARE may interface with and/or
communicate with, or may be later
upgraded to interface with and/or
communicate with additional software
and/or systems provided by third party
software and service suppliers. The
additional software and services of
third party origin, as well as associated
media, printed materials, and "online"
or electronic documentation ("THIRD
PARTY SOFTWARE") are protected by
international intellectual property laws
and treaties. The THIRD PARTY
SOFTWARE is licensed, not sold. All
rights reserved.
The MS SOFTWARE, FORD
SOFTWARE and THIRD PARTY
SOFTWARE hereinafter collectively
and individually will be referred to as
"SOFTWARE".
You may use the SOFTWARE as
installed on the DEVICE and as
otherwise interfacing with systems
and/or services provide by or through
FORD MOTOR COMPANY or its third
party software and service providers.
Appendices
•
Description of Other Rights and
Limitations
•
•
•
•
Speech Recognition: If the
SOFTWARE includes speech
recognition component(s), you should
understand that speech recognition is
an inherently statistical process and
that recognition errors are inherent in
the process. Neither FORD MOTOR
COMPANY nor its suppliers shall be
liable for any damages arising out of
errors in the speech recognition
process.
Limitations on Reverse Engineering,
Decompilation and Disassembly:
You may not reverse engineer,
decompile, or disassemble nor permit
others to reverse engineer, decompile
or disassemble the SOFTWARE, except
and only to the extent that such activity
is expressly permitted by applicable
law notwithstanding this limitation.
Limitations on Distributing,
Copying, Modifying and Creating
Derivative Works: You may not
distribute, copy, make modifications
to or create derivative works based on
the SOFTWARE, except and only to the
extent that such activity is expressly
permitted by applicable law
notwithstanding this limitation.
Single EULA: The end user
documentation for the DEVICE and
related systems and services may
contain multiple EULAs, such as
multiple translations and/or multiple
media versions (e.g., in the user
documentation and in the software).
Even if you receive multiple EULAs, you
are licensed to use only one (1) copy of
the SOFTWARE.
•
•
354
Fiesta (CCT)
SOFTWARE Transfer: You may
permanently transfer your rights under
this EULA only as part of a sale or
transfer of the DEVICE, provided you
retain no copies, you transfer all of the
SOFTWARE (including all component
parts, the media and printed materials,
any upgrades, and, if applicable, the
Certificate(s) of Authenticity), and the
recipient agrees to the terms of this
EULA. If the SOFTWARE is an upgrade,
any transfer must include all prior
versions of the SOFTWARE.
Termination: Without prejudice to any
other rights, FORD MOTOR COMPANY
or MS may terminate this EULA if you
fail to comply with the terms and
conditions of this EULA.
Security Updates/Digital Rights
Management: Content owners use
the WMDRM technology included in
your DEVICE to protect their
intellectual property, included
copyrighted content. Portions of the
SOFTWARE on your DEVICE use
WMDRM software to access
WMDRM-protected content. If the
WMDRM software fails to protect the
content, content owners may ask
Microsoft to revoke the SOFTWARE's
ability to use WMDRM to play or copy
protected content. This action does
not affect unprotected content. When
your DEVICE downloads licenses for
protected content, you agree that
Microsoft may include a revocation list
with the licenses. Content owners may
require you to upgrade the SOFTWARE
on your DEVICE to access their content.
If you decline an upgrade, you will not
be able to access content that requires
the upgrade.
Appendices
•
•
•
supplements, add-on components, or
Internet-based services components
of the SOFTWARE after the date you
obtain your initial copy of the
SOFTWARE ("Supplemental
Components").
Consent to Use of Data: You agree
that MS, Microsoft Corporation, FORD
MOTOR COMPANY, third party
software and systems suppliers, their
affiliates and/or their designated agent
may collect and use technical
information gathered in any manner as
part of product support services related
to the SOFTWARE or related services.
MS, Microsoft Corporation, FORD
MOTOR COMPANY, third party
software and services suppliers, their
affiliates and/or their designated agent
may use this information solely to
improve their products or to provide
customized services or technologies to
you. MS, Microsoft Corporation, FORD
MOTOR COMPANY, third party
software and systems suppliers, their
affiliates and/or their designated agent
may disclose this information to others,
but not in a form that personally
identifies you.
Internet-Based Services
Components: The SOFTWARE may
contain components that enable and
facilitate the use of certain
Internet-based services. You
acknowledge and agree that MS,
Microsoft Corporation, FORD MOTOR
COMPANY, third party software and
service suppliers, their affiliates and/or
their designated agent may
automatically check the version of the
SOFTWARE and/or its components
that you are utilizing and may provide
upgrades or supplements to the
SOFTWARE that may be automatically
downloaded to your DEVICE.
Additional Software/Services: The
SOFTWARE may permit FORD MOTOR
COMPANY, third party software and
service suppliers, MS, Microsoft
Corporation, their affiliates and/or their
designated agent to provide or make
available to you SOFTWARE updates,
If FORD MOTOR COMPANY or third party
software and services suppliers provide or
make available to you Supplemental
Components and no other EULA terms are
provided along with the Supplemental
Components, then the terms of this EULA
shall apply.
If MS, Microsoft Corporation, their affiliates
and/or their designated agent make
available Supplemental Components, and
no other EULA terms are provided, then
the terms of this EULA shall apply, except
that the MS, Microsoft Corporation or
affiliate entity providing the Supplemental
Component(s) shall be the licensor of the
Supplemental Component(s).
FORD MOTOR COMPANY, MS, Microsoft
Corporation, their affiliates and/or their
designated agent reserve the right to
discontinue without liability any
Internet-based services provided to you or
made available to you through the use of
the SOFTWARE.
355
Fiesta (CCT)
Appendices
•
•
Links to Third Party Sites: The MS
SOFTWARE may provide you with the
ability to link to third party sites through
the use of the SOFTWARE. The third
party sites are not under the control of
MS, Microsoft Corporation, their
affiliates and/or their designated
agent. Neither MS nor Microsoft
Corporation nor their affiliates nor their
designated agent are responsible for
(i) the contents of any third party sites,
any links contained in third party sites,
or any changes or updates to third
party sites, or (ii) webcasting or any
other form of transmission received
from any third party sites. If the
SOFTWARE provides links to third
party sites, those links are provided to
you only as a convenience, and the
inclusion of any link does not imply an
endorsement of the third party site by
MS, Microsoft Corporation, their
affiliates and/or their designated
agent.
Obligation to Drive Responsibly:
You recognize your obligation to drive
responsibly and keep attention on the
road. You will read and abide with the
DEVICE operating instructions
particularly as they pertain to safety
and assumes any risk associated with
the use of the DEVICE.
INTELLECTUAL PROPERTY RIGHTS:
All title and intellectual property rights in
and to the SOFTWARE (including but not
limited to any images, photographs,
animations, video, audio, music, text and
"applets" incorporated into the
SOFTWARE), the accompanying printed
materials, and any copies of the
SOFTWARE, are owned by MS, Microsoft
Corporation, FORD MOTOR COMPANY, or
their affiliates or suppliers. The
SOFTWARE is licensed, not sold. You may
not copy the printed materials
accompanying the SOFTWARE. All title
and intellectual property rights in and to
the content which may be accessed
through use of the SOFTWARE is the
property of the respective content owner
and may be protected by applicable
copyright or other intellectual property
laws and treaties. This EULA grants you no
rights to use such content. All rights not
specifically granted under this EULA are
reserved by MS, Microsoft Corporation,
FORD MOTOR COMPANY, third party
software and service providers, their
affiliates and suppliers. Use of any on-line
services which may be accessed through
the SOFTWARE may be governed by the
respective terms of use relating to such
services. If this SOFTWARE contains
documentation that is provided only in
electronic form, you may print one copy of
such electronic documentation.
UPGRADES AND RECOVERY MEDIA:
If the SOFTWARE is provided by FORD
MOTOR COMPANY separate from the
DEVICE on media such as a ROM chip, CD
ROM disk(s) or via web download or other
means, and is labeled "For Upgrade
Purposes Only" or "For Recovery Purposes
Only" you may install one (1) copy of such
SOFTWARE onto the DEVICE as a
replacement copy for the existing
SOFTWARE, and use it in accordance with
this EULA, including any additional EULA
terms accompanying the upgrade
SOFTWARE.
EXPORT RESTRICTIONS: You
acknowledge that the SOFTWARE is
subject to U.S. and European Union export
jurisdiction. You agree to comply with all
applicable international and national laws
that apply to the SOFTWARE, including
the U.S. Export Administration Regulations,
as well as end-user, end-use and
destination restrictions issued by U.S. and
other governments. For additional
information, see
http://www.microsoft.com/exporting/.
356
Fiesta (CCT)
Appendices
Adobe
TRADEMARKS: This EULA does not grant
you any rights in connection with any
trademarks or service marks of FORD
MOTOR COMPANY, MS, Microsoft
Corporation, third party software or service
providers, their affiliates or suppliers.
Contains Adobe® [Flash® Player] or
[AIR®] technology by Adobe Systems
Incorporated. This [Licensee Product]
contains [Adobe® Flash® Player]
[Adobe® AIR®] software under license
from Adobe Systems Incorporated,
Copyright ©1995-2009 Adobe
Macromedia Software LLC. All rights
reserved. Adobe, Flash and AIR are
trademarks of Adobe Systems
Incorporated.
PRODUCT SUPPORT: Product support
for the SOFTWARE is not provided by MS,
its parent corporation Microsoft
Corporation, or their affiliates or
subsidiaries. For product support, please
refer to FORD MOTOR COMPANY
instructions provided in the documentation
for the DEVICE. Should you have any
questions concerning this EULA, or if you
desire to contact FORD MOTOR
COMPANY for any other reason, please
refer to the address provided in the
documentation for the DEVICE.
End User Notice
Microsoft® Windows® Mobile for
Automotive Important Safety
Information
This system Ford SYNC™ contains
software that is licensed to Manufacturer
FORD MOTOR COMPANY by an affiliate
of Microsoft Corporation pursuant to a
license agreement. Any removal,
reproduction, reverse engineering or other
unauthorized use of the software from this
system in violation of the license
agreement is strictly prohibited and may
subject you to legal action.
No Liability for Certain Damages:
EXCEPT AS PROHIBITED BY LAW, FORD
MOTOR COMPANY, ANY THIRD PARTY
SOFTWARE OR SERVICES SUPPLIERS,
MS, MICROSOFT CORPORATION AND
THEIR AFFILIATES SHALL HAVE NO
LIABILITY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL
DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR
PERFORMANCE OF THE SOFTWARE. THIS
LIMITATION SHALL APPLY EVEN IF ANY
REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. IN NO EVENT SHALL MS,
MICROSOFT CORPORATION AND/OR
THEIR AFFILIATES BE LIABLE FOR ANY
AMOUNT IN EXCESS OF U.S. TWO
HUNDRED FIFTY DOLLARS (U.S.
$250.00).
•
Read and follow instructions: Before
using your Windows Automotive- based
system, read and follow all instructions
and safety information provided in this end
user manual ("User's Guide"). Not
following precautions found in this User's
Guide can lead to an accident or other
serious consequences.
Keep User's Guide in vehicle: When kept
in the vehicle, the User's Guide will be a
ready reference for you and other users
unfamiliar with the Windows
Automotive-based system. Please make
certain that before using the system for
the first time, all persons have access to
the User's Guide and read its instructions
and safety information carefully.
THERE ARE NO WARRANTIES OTHER
THAN THOSE THAT MAY EXPRESSLY
BE PROVIDED FOR YOUR NEW
VEHICLE.
357
Fiesta (CCT)
Appendices
Use of Speech Recognition Functions:
Speech recognition software is inherently
a statistical process which is subject to
errors. It is your responsibility to monitor
any speech recognition functions included
in the system and address any errors.
WARNING
Operating certain parts of this
system while driving can distract
your attention away from the road,
and possibly cause an accident or other
serious consequences. Do not change
system settings or enter data non-verbally
(using your hands) while driving. Stop the
vehicle in a safe and legal manner before
attempting these operations. This is
important since while setting up or
changing some functions you might be
required to distract your attention away
from the road and remove your hands from
the wheel.
Navigation Features: Any navigation
features included in the system are
intended to provide turn by turn
instructions to get you to a desired
destination. Please make certain all
persons using this system carefully read
and follow instructions and safety
information fully.
Distraction Hazard: Any navigation
features may require manual (non-verbal)
setup. Attempting to perform such set-up
or insert data while driving can seriously
distract your attention and could cause an
accident or other serious consequences.
Stop the vehicle in a safe and legal manner
before attempting these operations.
General Operation
Voice Command Control: Functions
within the Windows Automotive-based
system may be accomplished using only
voice commands. Using voice commands
while driving allows you to operate the
system without removing your hands from
the wheel.
Let Your Judgment Prevail: Any
navigation features are provided only as
an aid. Make your driving decisions based
on your observations of local conditions
and existing traffic regulations. Any such
feature is not a substitute for your personal
judgment. Any route suggestions made by
this system should never replace any local
traffic regulations or your personal
judgment or knowledge of safe driving
practices.
Prolonged Views of Screen: Do not
access any function requiring a prolonged
view of the screen while you are driving.
Pull over in a safe and legal manner before
attempting to access a function of the
system requiring prolonged attention. Even
occasional short scans to the screen may
be hazardous if your attention has been
diverted away from your driving task at a
critical time.
Route Safety: Do not follow the route
suggestions if doing so would result in an
unsafe or illegal maneuver, if you would be
placed in an unsafe situation, or if you
would be directed into an area that you
consider unsafe. The driver is ultimately
responsible for the safe operation of the
vehicle and therefore, must evaluate
whether it is safe to follow the suggested
directions.
Volume Setting: Do not raise the volume
excessively. Keep the volume at a level
where you can still hear outside traffic and
emergency signals while driving. Driving
while unable to hear these sounds could
cause an accident.
358
Fiesta (CCT)
Appendices
Potential Map Inaccuracy: Maps used
by this system may be inaccurate because
of changes in roads, traffic controls or
driving conditions. Always use good
judgment and common sense when
following the suggested routes.
places you in an unsafe situation, or directs
you into an area that you consider to be
unsafe, do not follow such instructions; (c)
do not input destinations, or otherwise
manipulate the TeleNav Software, unless
your vehicle is stationary and parked; (d)
do not use the TeleNav Software for any
illegal, unauthorized, unintended, unsafe,
hazardous, or unlawful purposes, or in any
manner inconsistent with this Agreement;
(e) arrange all GPS and wireless devices
and cables necessary for use of the
TeleNav Software in a secure manner in
your vehicle so that they will not interfere
with your driving and will not prevent the
operation of any safety device (such as an
airbag).
Emergency Services: Do not rely on any
navigation features included in the system
to route you to emergency services. Ask
local authorities or an emergency services
operator for these locations. Not all
emergency services such as police, fire
stations, hospitals and clinics are likely to
be contained in the map database for such
navigation features.
TeleNav Software End User License
Agreement
You agree to indemnify and hold TeleNav
harmless against all claims resulting from
any dangerous or otherwise inappropriate
use of the TeleNav Software in any moving
vehicle, including as a result of your failure
to comply with the directions above.
Please read these terms and conditions
carefully before you use the TeleNav
Software. Your use of the TeleNav
Software indicates that you accept these
terms and conditions. If you do not accept
these terms and conditions, do not break
the seal of the package, launch, or
otherwise use the TeleNav Software.
2. Account Information
You agree: (a) when registering the
TeleNav Software, to provide TeleNav with
true, accurate, current, and complete
information about yourself, and (b) to
inform TeleNav promptly of any changes
to such information, and to keep it true,
accurate, current and complete.
TeleNav may revise this Agreement and
the privacy policy at any time, with or
without notice to you. You agree to visit
http://www.telenav.com from time to time
to review the then current version of this
Agreement and of the privacy policy.
3. Software License
1. Safe and Lawful Use
Subject to your compliance with the terms
of this Agreement, TeleNav hereby grants
to you a personal, non-exclusive,
non-transferable license (except as
expressly permitted below in connection
with your permanent transfer of the
TeleNav Software license), without the
right to sublicense, to use the TeleNav
Software (in object code form only) in
order to access and use the TeleNav
Software. This license shall terminate upon
You acknowledge that devoting attention
to the TeleNav Software may pose a risk
of injury or death to you and others in
situations that otherwise require your
undivided attention, and you therefore
agree to comply with the following when
using the TeleNav Software: (a) observe
all traffic laws and otherwise drive safely;
(b) use your own personal judgment while
driving. If you feel that a route suggested
by the TeleNav Software instructs you to
perform an unsafe or illegal maneuver,
359
Fiesta (CCT)
Appendices
4. Disclaimers
any termination or expiration of this
Agreement. You agree that you will use the
TeleNav Software only for your personal
business or leisure purposes, and not to
provide commercial navigation services to
other parties.
To the fullest extent permissible pursuant
to applicable law, in no event will TeleNav,
its licensors and suppliers, or agents or
employees of any of the foregoing, be
liable for any decision made or action
taken by you or anyone else in reliance on
the information provided by the TeleNav
Software. TeleNav also does not warrant
the accuracy of the map or other data used
for the TeleNav Software. Such data may
not always reflect reality due to, among
other things, road closures, construction,
weather, new roads and other changing
conditions. You are responsible for the
entire risk arising out of your use of the
TeleNav Software. For example but
without limitation, you agree not to rely on
the TeleNav Software for critical
navigation in areas where the well-being
or survival of you or others is dependent
on the accuracy of navigation, as the maps
or functionality of the TeleNav Software
are not intended to support such high risk
applications, especially in more remote
geographical areas.
3.1 License Limitations
You agree not to do any of the following:
(a) reverse engineer, decompile,
disassemble, translate, modify, alter or
otherwise change the TeleNav Software
or any part thereof; (b) attempt to derive
the source code, audio library or structure
of the TeleNav Software without the prior
express written consent of TeleNav; (c)
remove from the TeleNav Software, or
alter, any of TeleNav's or its suppliers'
trademarks, trade names, logos, patent or
copyright notices, or other notices or
markings; (d) distribute, sublicense or
otherwise transfer the TeleNav Software
to others, except as part of your permanent
transfer of the TeleNav Software; or (e)
use the TeleNav Software in any manner
that (i) infringes the intellectual property
or proprietary rights, rights of publicity or
privacy or other rights of any party, (ii)
violates any law, statute, ordinance or
regulation, including but not limited to laws
and regulations related to spamming,
privacy, consumer and child protection,
obscenity or defamation, or (iii) is harmful,
threatening, abusive, harassing, tortuous,
defamatory, vulgar, obscene, libelous, or
otherwise objectionable; and (f) lease, rent
out, or otherwise permit unauthorized
access by third parties to the TeleNav
Software without advanced written
permission of TeleNav.
TELENAV EXPRESSLY DISCLAIMS AND
EXCLUDES ALL WARRANTIES IN
CONNECTION WITH THE TELENAV
SOFTWARE, WHETHER STATUTORY,
EXPRESS OR IMPLIED, INCLUDING ALL
WARRANTIES WHICH MAY ARISE FROM
COURSE OF DEALING, CUSTOM OR
TRADE AND INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NON-INFRINGEMENT OF THIRD PARTY
RIGHTS WITH RESPECT TO THE TELENAV
SOFTWARE. Certain jurisdictions do not
permit the disclaimer of certain warranties,
so this limitation may not apply to you.
360
Fiesta (CCT)
Appendices
5. Limitation of Liability
Commercial Arbitration Rules of the
American Arbitration Association, and the
judgment upon the award rendered by the
arbitrator may be entered by any court
having jurisdiction. Note that there is no
judge or jury in an arbitration proceeding
and the decision of the arbitrator shall be
binding upon both parties. You expressly
agree to waive your right to a jury trial.
TO THE EXTENT PERMITTED UNDER
APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL TELENAV OR
ITS LICENSORS AND SUPPLIERS BE
LIABLE TO YOU OR TO ANY THIRD PARTY
FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL, SPECIAL OR
EXEMPLARY DAMAGES (INCLUDING IN
EACH CASE, BUT NOT LIMITED TO,
DAMAGES FOR THE INABILITY TO USE
THE EQUIPMENT OR ACCESS DATA,
LOSS OF DATA, LOSS OF BUSINESS,
LOSS OF PROFITS, BUSINESS
INTERRUPTION OR THE LIKE) ARISING
OUT OF THE USE OF OR INABILITY TO
USE THE TELENAV SOFTWARE, EVEN IF
TELENAV HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This Agreement and performance
hereunder will be governed by and
construed in accordance with the laws of
the State of California, without giving
effect to its conflict of laws provisions. To
the extent judicial action is necessary in
connection with the binding arbitration,
both TeleNav and you agree to submit to
the exclusive jurisdiction of the courts of
the County of Santa Clara, California. The
United Nations Convention on Contracts
for the International Sale of Goods shall
not apply.
NOTWITHSTANDING ANY DAMAGES
THAT YOU MIGHT INCUR FOR ANY
REASON WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, ALL DAMAGES
REFERENCED HEREIN AND ALL DIRECT
OR GENERAL DAMAGES IN CONTRACT,
TORT (INCLUDING NEGLIGENCE) OR
OTHERWISE), THE ENTIRE LIABILITY OF
TELENAV AND OF ALL OF TELENAV'S
SUPPLIERS SHALL BE LIMITED TO THE
AMOUNT ACTUALLY PAID BY YOU FOR
THE TELENAV SOFTWARE. SOME
STATES AND/OR JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO
YOU.
7. Assignment
You may not resell, assign, or transfer this
Agreement or any of your rights or
obligations, except in totality, in connection
with your permanent transfer of the
TeleNav Software, and expressly
conditioned upon the new user of the
TeleNav Software agreeing to be bound
by the terms and conditions of this
Agreement. Any such sale, assignment or
transfer that is not expressly permitted
under this paragraph will result in
immediate termination of this Agreement,
without liability to TeleNav, in which case
you and all other parties shall immediately
cease all use of the TeleNav Software.
Notwithstanding the foregoing, TeleNav
may assign this Agreement to any other
party at any time without notice, provided
the assignee remains bound by this
Agreement.
6. Arbitration and Governing Law
You agree that any dispute, claim or
controversy arising out of or relating to this
Agreement or the TeleNav Software shall
be settled by independent arbitration
involving a neutral arbitrator and
administered by the American Arbitration
Association in the County of Santa Clara,
California. The arbitrator shall apply the
361
Fiesta (CCT)
Appendices
8. Miscellaneous
8.5
8.1
If any provision herein is held
unenforceable, then such provision will be
modified to reflect the intention of the
parties, and the remaining provisions of
this Agreement will remain in full force and
effect
This Agreement constitutes the entire
agreement between TeleNav and you with
respect to the subject matter hereof.
8.2
Except for the limited licenses expressly
granted in this Agreement, TeleNav retains
all right, title and interest in and to the
TeleNav Software, including without
limitation all related intellectual property
rights. No licenses or other rights which are
not expressly granted in this Agreement
are intended to, or shall be, granted or
conferred by implication, statute,
inducement, estoppel or otherwise, and
TeleNav and its suppliers and licensors
hereby reserve all of their respective rights
other than the licenses explicitly granted
in this Agreement
8.6
8.3
The TeleNav Software utilizes map and
other data licensed to TeleNav by third
party vendors for the benefit of you and
other end users. This Agreement includes
end-user terms applicable to these
companies (included at the end of this
Agreement), and thus your use of the
TeleNav Software is also subject to such
terms. You agree to comply with the
following additional terms and conditions,
which are applicable to TeleNav's third
party vendor licensors:
The headings in this Agreement are for
convenience of reference only, will not be
deemed to be a part of this Agreement,
and will not be referred to in connection
with the construction or interpretation of
this Agreement. As used in this Agreement,
the words "include" and "including" and
variations thereof, will not be deemed to
be terms of limitation, but rather will be
deemed to be followed by the words
"without limitation".
9. Other Vendors Terms and Conditions
By using the TeleNav Software, you
consent to receive from TeleNav all
communications, including notices,
agreements, legally required disclosures
or other information in connection with the
TeleNav Software (collectively, "Notices")
electronically. TeleNav may provide such
Notices by posting them on TeleNav's
Website or by downloading such Notices
to your wireless device. If you desire to
withdraw your consent to receive Notices
electronically, you must discontinue your
use of the TeleNav Software.
NavTeq End User License Agreement
END USER TERMS
8.4
The content provided ("Data") is licensed,
not sold. By opening this package, or
installing, copying, or otherwise using the
Data, you agree to be bound by the terms
of this agreement. If you do not agree to
the terms of this agreement, you are not
permitted to install, copy, use, resell or
transfer the Data. If you wish to reject the
terms of this agreement, and have not
TeleNav's or your failure to require
performance of any provision shall not
affect that party's right to require
performance at any time thereafter, nor
shall a waiver of any breach or default of
this Agreement constitute a waiver of any
subsequent breach or default or a waiver
of the provision itself.
362
Fiesta (CCT)
Appendices
installed, copied, or used the Data, you
must contact your retailer or NAVTEQ
North America, LLC ("NT") within thirty
(30) days of purchase for a refund of your
purchase price. To contact NT, please visit
www.navteq.com.
reproduce, copy, modify, decompile,
disassemble or reverse engineer any
portion of this Data, and may not transfer
or distribute it in any form, for any purpose,
except to the extent permitted by
mandatory laws.
The Data is provided for your personal,
internal use only and may not be resold. It
is protected by copyright, and is subject to
the following terms (this "End User License
Agreement") and conditions which are
agreed to by you, on the one hand, and
NAVTEQ North America, LLC ("NT") and
its licensors (including their licensors and
suppliers) on the other hand.
License Limitations on Transfer: Your
limited license does not allow transfer or
resale of the Data, except on the condition
that you may transfer the Data and all
accompanying materials on a permanent
basis if: (a) you retain no copies of the
Data; (b) the recipient agrees to the terms
of this End User License Agreement; and
(c) you transfer the Data in the exact same
form as you purchased it by physically
transferring the original media (e.g., the
CD-ROM or DVD you purchased), all
original packaging, all Manuals and other
documentation. Specifically, Multi-disc
sets may only be transferred or sold as a
complete set as provided to you and not
as a subset thereof.
The Data for areas of Canada includes
information taken with permission from
Canadian authorities, including: © Her
Majesty the Queen in Right of Canada, ©
Queen's Printer for Ontario, © Canada Post
Corporation, GeoBase®.
NT holds a nonexclusive license from the
United States Postal Service ® to publish
and sell ZIP+4 ® information.
Additional License Limitations: Except
where you have been specifically licensed
to do so by NT in a separate written
agreement, and without limiting the
preceding paragraph, your license is
conditioned on use of the Data as
prescribed in this agreement, and you may
not (a) use this Data with any products,
systems, or applications installed or
otherwise connected to or in
communication with vehicles capable of
vehicle navigation, positioning, dispatch,
real time route guidance, fleet
management or similar applications; or (b)
with, or in communication with, including
without limitation, cellular phones,
palmtop and handheld computers, pagers,
and personal digital assistants or PDAs.
© United States Postal Service ® 2009.
Prices are not established, controlled or
approved by the United States Postal
Service ® The following trademarks and
registrations are owned by the USPS:
United States Postal Service, USPS, and
ZIP+4.
The Data for Mexico includes certain Data
from Instituto Nacional de Estadística y
Geografía.
TERMS AND CONDITIONS
License Limitations on Use: You agree
that your license to use this Data is limited
to and conditioned on use for solely
personal, noncommercial purposes, and
not for service bureau, timesharing or other
similar purposes. Except as otherwise set
forth herein, you agree not to otherwise
363
Fiesta (CCT)
Appendices
OR SAVINGS, OR ANY OTHER DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING
OUT OF YOUR USE OF OR INABILITY TO
USE THIS DATA, ANY DEFECT IN THIS
DATA, OR THE BREACH OF THESE TERMS
OR CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT OR
BASED ON A WARRANTY, EVEN IF NT OR
ITS LICENSORS HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Some States, Territories and Countries do
not allow certain liability exclusions or
damages limitations, so to that extent the
above may not apply to you.
WARNING
This Data may contain inaccurate or
incomplete information due to the
passage of time, changing
circumstances, sources used and the
nature of collecting comprehensive
geographic Data, any of which may lead
to incorrect results.
No Warranty: This Data is provided to you
"as is" , and you agree to use it at your own
risk. NT and its licensors (and their
licensors and suppliers) make no
guarantees, representations or warranties
of any kind, express or implied, arising by
law or otherwise, including but not limited
to, content, quality, accuracy,
completeness, effectiveness, reliability,
fitness for a particular purpose, usefulness,
use or results to be obtained from this
Data, or that the Data or server will be
uninterrupted or error free.
Export Control: You agree not to export
from anywhere any part of the Data or any
direct product thereof except in
compliance with, and with all licenses and
approvals required under, applicable
export laws, rules and regulations,
including but not limited to the laws, rules
and regulations administered by the Office
of Foreign Assets Control of the U.S.
Department of Commerce and the Bureau
of Industry and Security of the U.S.
Department of Commerce. To the extent
that any such export laws, rules or
regulations prohibit NT from complying
with any of its obligations hereunder to
deliver or distribute Data, such failure shall
be excused and shall not constitute a
breach of this Agreement.
Disclaimer of Warranty: NT AND ITS
LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) DISCLAIM
ANY WARRANTIES, EXPRESS OR IMPLIED,
OF QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR
NON-INFRINGEMENT. Some States,
Territories and Countries do not allow
certain warranty exclusions, so to that
extent the above exclusion may not apply
to you.
Entire Agreement: These terms and
conditions constitute the entire agreement
between NT (and its licensors, including
their licensors and suppliers) and you
pertaining to the subject matter hereof,
and supersedes in their entirety any and
all written or oral agreements previously
existing between us with respect to such
subject matter.
Disclaimer of Liability: NT AND ITS
LICENSORS (INCLUDING THEIR
LICENSORS AND SUPPLIERS) SHALL NOT
BE LIABLE TO YOU IN RESPECT OF ANY
CLAIM, DEMAND OR ACTION,
IRRESPECTIVE OF THE NATURE OF THE
CAUSE OF THE CLAIM, DEMAND OR
ACTION ALLEGING ANY LOSS, INJURY OR
DAMAGES, DIRECT OR INDIRECT, WHICH
MAY RESULT FROM THE USE OR
POSSESSION OF THIS DATA; OR FOR ANY
LOSS OF PROFIT, REVENUE, CONTRACTS
364
Fiesta (CCT)
Appendices
Severability: You and NT agree that if any
portion of this agreement is found illegal
or unenforceable, that portion shall be
severed and the remainder of the
Agreement shall be given full force and
effect.
This Data is a commercial item as defined
in FAR 2.101
Governing Law: The above terms and
conditions shall be governed by the laws
of the State of Illinois, without giving effect
to (i) its conflict of laws provisions, or (ii)
the United Nations Convention for
Contracts for the International Sale of
Goods, which is explicitly excluded. You
agree to submit to the personal jurisdiction
of the State of Illinois for any and all
disputes, claims and actions arising from
or in connection with the Data provided to
you hereunder.
© 2011 NAVTEQ. All rights reserved.
and is subject to the End User License
Agreement under
which this Data was provided.
If the Contracting Officer, federal
government agency, or any federal official
refuses to use the legend provided herein,
the Contracting Officer, federal
government agency, or any federal official
must notify NAVTEQ prior to seeking
additional or alternative rights in the Data.
Wi-Fi hotspot data provided by JiWire, ©
2013 JiWire.
Gracenote® Copyright
Government End Users: If the Data is
being acquired by or on behalf of the
United States government or any other
entity seeking or applying rights similar to
those customarily claimed by the United
States government, this Data is a
"commercial term" as that term is defined
at 48 C.F.R. ("FAR") 2.101, is licensed in
accordance with this End User License
Agreement, and each copy of Data
delivered or otherwise furnished shall be
marked and embedded as appropriate
with the following "Notice of Use", and be
treated in accordance with such Notice:
CD and music-related data from
Gracenote, Inc., copyright© 2000-2007
Gracenote. Gracenote Software, copyright
© 2000-2007 Gracenote. This product and
service may practice one or more of the
following U.S. Patents #5,987,525,
#6,061,680, #6,154,773, #6,161,132,
#6,230,192, #6,230,207, #6.240,459,
#6,330,593 and other patents issued or
pending. Some services supplied under
license from Open Globe, Inc. for U.S.
Patent: #6,304,523.
Gracenote and CDDB are registered
trademarks of Gracenote. The Gracenote
logo and logotype, and the "Powered by
Gracenote™" logo are trademarks of
Gracenote.
NOTICE OF USE
CONTRACTOR
(MANUFACTURER/SUPPLIER)
NAME:
Gracenote® End User License Agreement
(EULA)
NAVTEQ
CONTRACTOR
(MANUFACTURER/SUPPLIER)
This device contains software from
Gracenote, Inc. of 2000 Powell Street
Emeryville, California 94608
("Gracenote").
ADDRESS:
425 West Randolph Street, Chicago, IL
60606.
365
Fiesta (CCT)
Appendices
The software from Gracenote (the
"Gracenote Software") enables this device
to do disc and music file identification and
obtain music-related information, including
name, artist, track, and title information
("Gracenote Data") from online servers
("Gracenote Servers"), and to perform
other functions. You may use Gracenote
Data only by means of the intended End
User functions of this device.
become liable for any payment to you for
any information that you provide, including
any copyrighted material or music file
information. You agree that Gracenote
may enforce its respective rights,
collectively or separately, under this
agreement against you, directly in each
company's own name.
Gracenote uses a unique identifier to track
queries for statistical purposes. The
purpose of a randomly assigned numeric
identifier is to allow Gracenote to count
queries without knowing anything about
who you are. For more information, see the
web page at www.gracenote.com for the
Gracenote Privacy Policy.
This device may contain content belonging
to Gracenote's providers. If so, all of the
restrictions set forth herein with respect to
Gracenote Data shall also apply to such
content and such content providers shall
be entitled to all of the benefits and
protections set forth herein that are
available to Gracenote.
THE GRACENOTE SOFTWARE, EACH ITEM
OF GRACENOTE DATA AND THE
GRACENOTE CONTENT ARE LICENSED
TO YOU "AS IS". NEITHER GRACENOTE
MAKES ANY REPRESENTATIONS OR
WARRANTIES, EXPRESS OR IMPLIED,
REGARDING THE ACCURACY OF ANY
GRACENOTE DATA FROM THE
GRACENOTE SERVERS OR GRACENOTE
CONTENT. GRACENOTE COLLECTIVELY
AND SEPARATELY RESERVE THE RIGHT
TO DELETE DATA AND/OR CONTENT
FROM THE COMPANIES' RESPECTIVE
SERVERS OR, IN THE CASE OF
GRACENOTE, CHANGE DATA
CATEGORIES FOR ANY CAUSE THAT
GRACENOTE DEEMS SUFFICIENT. NO
WARRANTY IS MADE THAT EITHER
GRACENOTE CONTENT OR THE
GRACENOTE SOFTWARE OR
GRACENOTE SERVERS ARE ERROR-FREE
OR THAT THE FUNCTIONING OF THE
GRACENOTE SOFTWARE OR
GRACENOTE SERVERS WILL BE
UNINTERRUPTED. GRACENOTE IS NOT
OBLIGATED TO PROVIDE YOU WITH ANY
ENHANCED OR ADDITIONAL DATA TYPES
THAT GRACENOTE MAY CHOOSE TO
PROVIDE IN THE FUTURE AND IS FREE
TO DISCONTINUE ITS ONLINE SERVICES
AT ANY TIME. GRACENOTE DISCLAIM ALL
You agree that you will use the content
from Gracenote ("Gracenote Content") ,
Gracenote Data, the Gracenote Software,
and Gracenote Servers for your own
personal, non-commercial use only. You
agree not to assign, copy, transfer or
transmit the Gracenote Content,
Gracenote Software or any Gracenote
Data (except in a Tag associated with a
music file) to any third party. YOU AGREE
NOT TO USE OR EXPLOIT GRACENOTE
CONTENT, GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR
GRACENOTE SERVERS, EXCEPT AS
EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive licenses
to use the Gracenote Content, Gracenote
Data, the Gracenote Software, and
Gracenote Servers will terminate if you
violate these restrictions. If your licenses
terminate, you agree to cease any and all
use of the Gracenote Content, Gracenote
Data, the Gracenote Software, and
Gracenote Servers. Gracenote,
respectively, reserve all rights in Gracenote
Data, the Gracenote Software, and the
Gracenote Servers and Gracenote Content,
including all ownership rights. Under no
circumstances will either Gracenote
366
Fiesta (CCT)
Appendices
WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. NEITHER
GRACENOTE WARRANTS THE RESULTS
THAT WILL BE OBTAINED BY YOUR USE
OF THE GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS
OR LOST REVENUES FOR ANY REASON
WHATSOEVER.
© Gracenote 2007.
FCC ID: KMHSYNCG2
IC: 1422A-SYNCG2
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
WARNING
Changes or modifications not
expressively approved by the party
responsible for compliance could
void the user's authority to operate the
equipment. The term "IC" before the radio
certification number only signifies that
Industry Canada technical specifications
were met.
The antenna used for this transmitter must
not be co-located or operating in
conjunction with any other antenna or
transmitter.
367
Fiesta (CCT)
Scheduled Maintenance
Genuine Ford and Motorcraft®
Replacement Parts
General Maintenance Information
Why Maintain Your Vehicle?
Dealerships stock Ford, Motorcraft and
Ford-authorized branded re-manufactured
replacement parts. These parts meet or
exceed our specifications. Parts installed
at your dealership carry a nationwide 12
month or 12000 mile (20000 kilometer)
parts and labor limited warranty.
Carefully following the maintenance
schedule helps protect against major repair
expenses resulting from neglect or
inadequate maintenance and may also
help to increase the value of your vehicle
when you sell or trade it. Keep all receipts
for completed maintenance with your
vehicle.
If you do not use Ford authorized parts they
may not meet our specifications and
depending on the part it could affect
emissions compliance.
Regular maintenance intervals for your
vehicle have been established based upon
rigorous testing. It is important that you
have your vehicle serviced at the proper
times. These intervals serve two purposes;
one is to maintain the reliability of your
vehicle and the second is to keep your cost
of owning your vehicle down.
Convenience
Many dealerships have extended evening
and Saturday hours to make your service
visit more convenient and they offer one
stop shopping. They can perform any
services that are required on your vehicle,
from general maintenance to collision
repairs.
It is your responsibility to see that all
scheduled maintenance is performed and
that the materials used meet the
specifications identified in this owner's
manual. See Capacities and
Specifications (page 233).
Note: Not all dealers have extended hours
or body shops. Please contact your dealer
for details.
Failure to perform scheduled maintenance
invalidates warranty coverage on parts
affected by the lack of maintenance.
Protecting Your Investment
Maintenance is an investment that pays
dividends in the form of improved
reliability, durability and resale value. To
maintain the proper performance of your
vehicle and its emission control systems,
it is imperative that scheduled
maintenance be completed at the
designated intervals.
Why Maintain Your Vehicle at Your
Dealership?
Factory-Trained Technicians
Service technicians participate in extensive
factory-sponsored certification training to
help them become experts on the
operation of your vehicle. Ask your
dealership about the training and
certification their technicians have
received.
Your vehicle is equipped with a message
center which displays a message in the
information display at the proper oil
change service interval. This interval is one
year or 10000 miles (16000 kilometers)
under normal driving conditions.
368
Fiesta (CCT)
Scheduled Maintenance
Additives and Chemicals
When ENGINE OIL CHANGE DUE or OIL
CHANGE REQUIRED appears in the
information display, it is time for an oil
change. The oil change must be done
within two weeks or 500 miles (800
kilometers) of the message appearing. The
oil minder system must be reset after each
oil change. See Engine Oil Check (page
182).
Recommended additives and chemicals
are listed in this owner's manual and in the
Ford Workshop Manual. Additional
chemicals or additives not approved by
Ford Motor Company are not
recommended as part of normal
maintenance. Please consult your warranty
information.
If your information display is prematurely
reset or becomes inoperative, you should
perform the oil change interval at six
months or 5000 miles (8000 kilometers)
from your last oil change. Never exceed
one year or 10000 miles (16000
kilometers) between oil change intervals.
Oils, Fluids and Flushing
In many cases, fluid discoloration is a
normal operating characteristic and, by
itself, does not necessarily indicate a
concern or that the fluid needs to be
changed. However, discolored fluids that
also show signs of overheating or foreign
material contamination should be
inspected immediately by a qualified
expert, such as the factory-trained
technicians at your dealership.
Your vehicle is very sophisticated and built
with multiple, complex, performance
systems. Every manufacturer develops
these systems using different
specifications and performance features.
That is why it is important to rely upon your
dealership to properly diagnose and repair
your vehicle.
Your vehicle’s oils and fluids should be
changed at the specified intervals or in
conjunction with a repair. Flushing is a
viable way to change fluid for many vehicle
sub-systems during scheduled
maintenance. It is critical that systems are
flushed only with new fluid that is the same
as that required to fill and operate the
system or using a Ford-approved flushing
chemical.
Ford Motor Company has recommended
maintenance intervals for various parts
and component systems based upon
engineering testing. Ford Motor Company
relies upon this testing to determine the
most appropriate mileage for replacement
of oils and fluids to protect your vehicle at
the lowest overall cost to you and
recommends against maintenance
schedules that deviate from the scheduled
maintenance information.
Owner Checks and Services
Certain basic maintenance checks and
inspections should be performed every
month or at six month intervals.
Ford strongly recommends the use of only
genuine Ford, Motorcraft® or
Ford-authorized re-manufactured
replacement parts because they are
engineered for your vehicle.
Check Every Month
•
•
•
•
369
Fiesta (CCT)
Engine oil level.
Function of all interior and exterior
lights.
Tires (including spare) for wear and
proper pressure.
Windshield washer fluid level.
Scheduled Maintenance
Check Every Six Months
•
•
•
•
•
•
•
•
Battery connections. Clean if
necessary.
Body and door drain holes for
obstructions. Clean if necessary.
Cooling system fluid level and coolant
strength.
Door weatherstrips for wear. Lubricate
if necessary.
Hinges, latches and outside locks for
proper operation. Lubricate if
necessary.
Parking brake for proper operation.
Safety belts and seat latches for wear
and function.
•
Safety warning lamps (brake, ABS,
airbag and safety belt) for operation.
Washer spray and wiper operation.
Clean or replace blades as necessary.
Multi-point Inspection
In order to keep your vehicle running right,
it is important to have the systems on your
vehicle checked regularly. This can help
identify potential issues and prevent major
problems. We recommend the following
multi-point inspection be performed at
every scheduled maintenance interval to
help ensure your vehicle keeps running
great.
Multi-point Inspection
Accessory drive belt(s)
Half-shaft dust boots
Battery performance
Horn operation
Clutch operation (if equipped)
Radiator, cooler, heater and A/C hoses
Engine air filter
Suspension components for leaks or
damage
Exhaust system
Steering and linkage
Exterior lamps and hazard warning system Tires (including spare) for wear and proper
operation
pressure
Fluid levels ; fill if necessary
Windshield for cracks, chips or pits
For oil and fluid leaks
Washer spray and wiper operation
*
*
Brake, coolant recovery reservoir, automatic transmission and window washer
condition of your vehicle. You know what
has been checked, what is okay as well as
those things that may require future or
immediate attention. The multi-point
vehicle inspection is one more way to keep
your vehicle running great.
Be sure to ask your dealership service
advisor or technician about the multi-point
vehicle inspection. It is a comprehensive
way to perform a thorough inspection of
your vehicle. It is your checklist that gives
you immediate feedback on the overall
370
Fiesta (CCT)
Scheduled Maintenance
Normal Scheduled Maintenance
This means you do not have to remember
to change the oil on a mileage-based
schedule; the vehicle lets you know when
an oil change is due by displaying ENGINE
OIL CHANGE DUE or OIL CHANGE
REQUIRED in the information display.
Your vehicle is equipped with an oil minder
system that indicates when the engine oil
should be changed under normal operating
conditions.
Every 10000 miles (16000 kilometers) or 12 months
**
Change engine oil and filter.
Rotate the tires.
Perform a multi-point inspection (recommended).
Inspect the automatic transmission fluid level. Consult your dealer for requirements.
Inspect the brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
Inspect the cabin air filter.
Inspect the engine cooling system strength and hoses.
Inspect the exhaust system and heat shields.
Inspect the half-shaft boots.
Inspect the steering linkage, ball joints, suspension, tire-rod ends, driveshaft and Ujoints. Lubricate any areas with grease fittings.
Inspect the tires, tire wear and measure the tread depth.
Inspect the wheels and related components for abnormal noise, wear, looseness or
drag.
*
Do not exceed one year or 10000 miles (16000 kilometers) between service intervals.
**
Reset the oil minder system after each engine oil and filter change. See Engine Oil
Check (page 182).
1
Additional Maintenance Items
Every 20000 miles (32000 Replace cabin air filter.
km)
Every 30000 miles (48000 Replace engine air filter.
km)
At 100000 miles (160000
km)
2
Change engine coolant.
371
Fiesta (CCT)
Scheduled Maintenance
1
Additional Maintenance Items
Every 100000 miles
(160000 km)
Replace spark plugs.
Inspect accessory drive belt(s).
3
Change automatic transmission fluid.
Every 150000 miles
(240000 km)
Replace accessory drive belt(s).
4
Replace timing belt (1.0L, 1.6L engine).
Replace oil pump drive belt.
1
Additional maintenance items can be performed within 3000 miles (4800 kilometers)
of the last engine oil and filter change. Do not exceed the designated distance for the
interval.
2
Initial replacement at six years or 100000 miles (160000 kilometers), then every three
years or 50000 miles (80000 kilometers).
3
After initial inspection, inspect every other oil change until replaced.
4
If not replaced within the last 100000 miles (160000 kilometers).
Maintenance Schedule Log
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
372
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
373
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
374
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
375
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Special Operating Conditions
If you operate your vehicle primarily in any
of the following conditions, you need to
perform additional maintenance as
indicated. If you operate your vehicle
occasionally under any of these
conditions, it is not necessary to perform
the additional maintenance. For specific
recommendations, see your dealership
service advisor or technician.
376
Fiesta (CCT)
Scheduled Maintenance
Towing a Trailer or Using a Car-top Carrier
As required
Change engine oil and filter as indicated by the information
display and perform services listed in the Normal Scheduled Maintenance chart.
Inspect frequently, service
as required
Inspect and lubricate U-joints.
Every 30000 miles (48000 Change automatic transmission fluid.
km)
Extensive Idling or Low-speed Driving for Long Distances, as in Heavy Commercial Use
(i.e. Delivery, Taxi, Patrol Car or Livery)
As required
Change engine oil and filter as indicated by the information
display and perform services listed in the Normal Scheduled Maintenance chart.
Inspect frequently, service
as required
Replace cabin air filter (if equipped).
Replace engine air filter.
Every 30000 miles (48000 Change automatic transmission fluid.
km)
Every 60000 miles (96000 Replace spark plugs.
km)
Operating in Dusty or Sandy Conditions Such as Unpaved or Dusty Roads
Inspect frequently, service
as required
Replace cabin air filter (if equipped).
Replace engine air filter.
Every 5000 miles (8000
km)
Inspect the wheels and related components for abnormal
noise, wear, looseness or drag.
Rotate tires, inspect tires for wear and measure tread
depth.
Every 5000 miles (8000
km) or six months
Change engine oil and filter.
Perform multi-point inspection.
Every 30000 miles (48000 Change automatic transmission fluid.
km)
Reset your oil life monitor system after each engine oil and filter change. See Engine Oil
Check (page 182).
377
Fiesta (CCT)
Scheduled Maintenance
Exclusive Use of E85 (Flex Fuel Vehicles only)
Every oil change
If ran exclusively on E85, fill the fuel tank full with regular
unleaded fuel.
Special Operating Condition Log
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
378
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
379
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
If the available API SM or SN oils are not
available, then the oil change service
interval is 3000 miles (4800 kilometers).
Exceptions
There are some exceptions your Normal
Scheduled Maintenance:
Engine air filter and cabin air filter
replacement: Engine air filter and cabin
air filter life is dependent on exposure to
dusty and dirty conditions. Vehicles
operated in these conditions require
frequent inspection and replacement of
the engine air filter and cabin air filter.
California fuel filter replacement: If the
vehicle is registered in California, the
California Air Resources Board has
determined that the failure to perform this
maintenance item will not nullify the
emission warranty or limit recall liability
prior to the completion of the vehicle's
useful life. Ford Motor Company, however,
urges you to have all recommended
maintenance services performed at the
specified intervals and to record all vehicle
service.
Engine Coolant Change Record
Initial change: Six years or 100000 miles
(160000 kilometers) (whichever comes
first).
After initial change: Every three years or
50000 miles (80000 kilometers).
Hot climate oil change intervals:
Vehicles operating in the Middle East,
North Africa, Sub-Saharan Africa or
locations with similar climates using an
American Petroleum Institute (API)
Certified for Gasoline Engines (Certification
mark) oil of SM or SN quality, the normal
oil change interval is 5000 miles (8000
kilometers).
380
Fiesta (CCT)
Scheduled Maintenance
Engine Coolant Change Log
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
381
Fiesta (CCT)
Scheduled Maintenance
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended):
Signature:
E146852
382
Fiesta (CCT)
Index
A
Audio unit - Vehicles With:
AM/FM/CD..................................................243
Alternative Frequencies..................................246
Automatic Volume Control............................246
Autostore Control..............................................246
News Broadcasts...............................................246
Regional Mode....................................................247
Sound Button......................................................245
Station Preset Buttons....................................246
Station Tuning Control.....................................245
Waveband Button.............................................245
About This Manual...........................................7
Protecting the Environment................................7
Accessories.....................................................237
Exterior style.........................................................237
Interior style..........................................................237
Lifestyle..................................................................237
Peace of mind......................................................237
Adjusting the Headlamps.........................188
Horizontal Aim Adjustment............................189
Vertical Aim Adjustment.................................188
Center Air Vents....................................................98
Side Air Vent..........................................................98
Audio unit - Vehicles With: Sony Audio
System/Touchscreen Display..............253
Audio unit - Vehicles With: Touchscreen
Display...........................................................252
Autolamps........................................................69
Automatic Climate Control......................100
Ambient Lighting.............................................71
Anti-Theft Alarm............................................62
Automatic Transmission............................128
Adjusting the Steering Wheel...................64
Airbag Disposal...............................................42
Air Vents............................................................98
Temperature Control..........................................101
Emergency Park Position Release
Lever.....................................................................131
Hints on Driving with an Automatic
Transmission....................................................131
Selector Lever Positions...................................129
Sport Mode and Manual Shifting.................130
Alarm System........................................................62
Arming the Alarm.................................................62
Disarming the Alarm...........................................62
Triggering the Alarm............................................62
Appendices....................................................353
Audible Warnings and Indicators.............85
Automatic Transmission Fluid
Check.............................................................185
Auxiliary Input Jack.....................................255
Auxiliary Power Points.................................112
Automatic Transmission...................................85
Headlamps On......................................................85
Key Outside Car....................................................85
Low Fuel..................................................................85
Safety Belt Minder...............................................85
12 Volt DC Power Point......................................112
Location...................................................................112
Audio Control..................................................64
....................................................................................6 4
B
Audio System................................................242
General Information..........................................242
Booster Seats..................................................23
Audio Troubleshooting..............................256
Audio unit - Vehicles With:
AM/FM/CD/SYNC.....................................247
Types of Booster Seats......................................23
Brake Fluid Check.........................................185
Brakes...............................................................134
Alternative Frequencies....................................251
Automatic Volume Control............................250
Autostore Control..............................................250
News Broadcasts................................................251
Regional Mode.....................................................251
Sound Button......................................................249
Station Preset Buttons....................................250
Station Tuning Control....................................250
Waveband Button.............................................250
General Information..........................................134
Breaking-In......................................................157
Brakes and Clutch...............................................157
Engine......................................................................157
Tires..........................................................................157
Bulb Specification Chart...........................199
C
Cabin Air Filter...............................................104
383
Fiesta (CCT)
Index
California Proposition 65.............................12
Capacities and Specifications................233
Cargo Nets.......................................................153
Child Safety.......................................................14
Installing and Removing the Cargo
Net.......................................................................153
Left-Hand Side......................................................25
Right-Hand Side...................................................25
Changing a Bulb - Vehicles With:
4-Door...........................................................190
Child Seat Positioning...................................21
Cigar Lighter.....................................................112
Cleaning Leather Seats.............................207
Cleaning Products.......................................203
Cleaning the Alloy Wheels.......................207
Cleaning the Engine...................................204
Cleaning the Exterior..................................203
General Information.............................................14
Child Safety Locks..........................................25
Center High Mounted Stop Lamp................193
Front Fog Lamps.................................................192
Headlamp.............................................................190
Interior Lamp........................................................194
License Plate Lamp...........................................194
Luggage Compartment Lamp, Footwell
Lamp and Liftgate Lamp............................194
Reading Lamps...................................................194
Rear Lamps...........................................................192
Side Direction Indicator.....................................191
Cleaning Plastic Exterior Parts.....................204
Exterior Chrome.................................................203
Underbody...........................................................204
Cleaning the Instrument Panel and
Instrument Cluster Lens........................206
Cleaning the Interior...................................205
Cleaning the Windows and Wiper
Blades...........................................................205
Clearing All MyKeys.......................................50
Climate Control..............................................98
Changing a Bulb - Vehicles With:
5-Door...........................................................195
Center High Mounted Stop Lamp................198
Front Fog Lamps.................................................197
Headlamp.............................................................195
Interior Lamp.......................................................198
License Plate Lamp...........................................198
Luggage Compartment Lamp, Footwell
Lamp and Liftgate Lamp............................199
Reading Lamps...................................................199
Rear Lamps...........................................................197
Side Direction Indicator...................................196
Principle of Operation........................................98
Clock...................................................................89
Type 1........................................................................89
Type 2.......................................................................89
Cold Weather Precautions.........................157
Crash Sensors and Airbag Indicator.........41
Creating a MyKey...........................................49
Changing a Fuse............................................175
Fuses........................................................................175
Programming or Changing Optional
Settings...............................................................49
Changing a Road Wheel...........................228
Cruise Control..................................................65
Dissimilar Spare Wheel and Tire Assembly
Information.....................................................228
Stowing the flat tire...........................................231
Tire Change Procedure....................................229
Cup Holders.....................................................113
Customer Assistance.................................160
Principle of Operation.......................................142
D
Changing the 12V Battery..........................186
Changing the Engine Air Filter..................187
Changing the Wiper Blades.....................186
Data Recording................................................10
Rear Window Wiper Blade..............................186
Windshield Wiper Blades................................186
Event Data Recording..........................................10
Service Data Recording......................................10
Checking MyKey System Status..............50
Daytime Running Lamps.............................70
Direction Indicators.......................................70
Driver and Passenger Airbags....................35
MyKey Distance....................................................50
Number of Admin Keys......................................50
Number of MyKeys..............................................50
Children and Airbags..........................................36
Proper Driver and Front Passenger Seating
Adjustment........................................................35
Checking the Wiper Blades......................186
Child Restraint and Safety Belt
Maintenance.................................................32
Driving Aids.....................................................144
384
Fiesta (CCT)
Index
F
Driving Hints....................................................157
Driving Through Water................................157
Fastening the Safety Belts..........................27
E
Restraint of Pregnant Women.........................27
Safety Belt Extension Assembly....................29
Safety Belt Locking Modes...............................28
Economical Driving.......................................157
Emission Control System...........................123
Floor Mats.......................................................158
Ford Credit.........................................................12
On-Board Diagnostics (OBD-II)....................124
Readiness for Inspection/Maintenance
(I/M) Testing....................................................125
(U.S. Only)................................................................12
Ford Extended Service Plan (ESP).......239
End User License Agreement..................353
SERVICE PLANS (CANADA ONLY).............241
SERVICE PLANS (U.S. Only).........................239
SYNC® End User License Agreement
(EULA)..............................................................353
Front Fog Lamps............................................70
Front Passenger Sensing System............36
Fuel and Refueling........................................119
Fuel Consumption........................................122
Engine Block Heater......................................117
Using the Engine Block Heater.......................118
Engine Coolant Check................................183
Adding Engine Coolant....................................184
Checking the Engine Coolant.........................183
Recycled Engine Coolant.................................185
Severe Climates..................................................185
Calculating Fuel Economy...............................123
Filling the Tank.....................................................123
Fuel Filter.........................................................186
Fuel Quality - Gasoline...............................120
Engine Oil Check...........................................182
Choosing the Right Fuel...................................120
Octane Recommendations............................120
Adding Engine Oil...............................................182
Resetting the Oil Life Monitoring
System...............................................................183
Fuel Shutoff....................................................167
Fuses.................................................................169
Fuse Specification Chart...........................169
Engine Oil Dipstick - 1.0L EcoBoost.......182
Engine Oil Dipstick - 1.6L Duratec-16V
Ti-VCT (Sigma)..........................................182
Engine Oil Dipstick - 1.6L
EcoBoost™..................................................182
Engine Specifications.................................233
Engine Compartment Fuse Box...................169
Passenger Compartment Fuse Box.............172
G
Drivebelt Routing...............................................233
Gauges...............................................................78
Entertainment.................................................311
Engine Coolant Temperature Gauge............78
Fuel Gauge..............................................................78
AM/FM Radio.......................................................312
Bluetooth Audio..................................................327
Browsing Device Content..................................311
CD............................................................................323
SD Card Slot and USB Port............................324
SIRIUS® Satellite Radio (If
Activated).........................................................318
Supported Media Players, Formats and
Metadata Information.................................327
General Information on Radio
Frequencies...................................................43
Intelligent Access.................................................43
Getting Assistance Outside the U.S. and
Canada..........................................................163
Getting the Services You Need...............160
Away From Home..............................................160
Global Opening and Closing......................74
Export Unique Options..................................12
Exterior Mirrors.................................................75
Global Closing........................................................75
Global Opening.....................................................74
Fold-Away Exterior Mirrors...............................76
Integrated Blind Spot Mirrors...........................76
Power Exterior Mirrors.........................................75
H
Hazard Warning Flashers...........................167
Headlamp Exit Delay....................................70
385
Fiesta (CCT)
Index
Instrument Cluster.........................................78
Instrument Lighting Dimmer.....................69
Interior Lamps...................................................71
Head Restraints............................................106
Adjusting the Head Restraint.........................107
Heated Seats..................................................110
Heated Windows and Mirrors..................104
Front Interior Lamps.............................................71
Rear Interior Lamps..............................................71
Heated Exterior Mirrors....................................104
Heated Windows................................................104
Interior Luggage Compartment
Release...........................................................60
Interior Mirror....................................................76
Hill Start Assist..............................................132
Switching the System On and Off................133
Using Hill Start Assist........................................132
Auto-Dimming Mirror...........................................77
Introduction.........................................................7
Hints on Controlling the Interior
Climate...........................................................101
J
Cooling the Interior Quickly............................103
General Hints........................................................101
Heating the Interior Quickly............................102
Maximum Cooling Performance in
Instrument Panel or Instrument Panel
and Footwell Positions...............................104
Recommended Settings for Cooling .........103
Recommended Settings for Heating..........102
Side Window Defogging in Cold
Weather............................................................104
Vehicle Stationary for Extended Periods
During Extreme High Ambient
Temperatures..................................................103
Jump-Starting the Vehicle.........................167
To Connect the Booster Cables....................168
To Start the Engine............................................168
K
Keyless Entry...................................................58
Disabled Keys........................................................59
General Information............................................58
Locking and Unlocking the Doors With the
Key Blade...........................................................59
Locking Your Vehicle...........................................58
Passive Key.............................................................58
Unlocking Your Vehicle......................................59
Hints on Driving With Anti-Lock
Brakes............................................................134
I
Keyless Starting.............................................114
Failure to Start......................................................115
Ignition On..............................................................115
Starting with Automatic
Transmission....................................................115
Starting with Manual Transmission..............115
Stopping the Engine When Your Vehicle is
Moving................................................................116
Stopping the Engine with Your Vehicle
Stationary..........................................................116
Ignition Switch................................................114
In California (U.S. Only)..............................161
Information Displays....................................86
General Information...........................................86
Information....................................................334
911 Assist..............................................................340
Alerts......................................................................340
Calendar...............................................................340
SIRIUS Travel Link.............................................338
SYNC Services (If Equipped, United States
Only)..................................................................335
Vehicle Health Report......................................342
Keys and Remote Controls.........................43
Knee Airbag.....................................................40
L
Information Messages.................................90
Installing Child Seats.....................................15
Lighting Control..............................................68
Child Seats...............................................................15
Using Lap and Shoulder Belts..........................16
Using Lower Anchors and Tethers for
Children (LATCH).............................................18
Using Tether Straps.............................................20
Headlamp Flasher...............................................69
High Beams............................................................69
Lighting Control Positions................................68
Parking Lamps......................................................68
386
Fiesta (CCT)
Index
Lighting..............................................................68
Manual Transmission..................................126
General Information...........................................68
Parking Your Vehicle...........................................127
Recommended Shift Speeds.........................126
Reverse...................................................................126
Using the Clutch..................................................126
Load Carrying.................................................145
General Information..........................................145
Load Limit........................................................145
Mobile Communications
Equipment......................................................10
Moonroof............................................................77
Vehicle Loading - with and without a
Trailer..................................................................145
Locking and Unlocking.................................54
Auto lock and Auto unlock Feature...............55
Emergency Locking with the Key...................56
Locking and Unlocking the Doors From
Inside....................................................................54
Locking and Unlocking the Doors with the
Key........................................................................54
Remote Control....................................................54
Smart Unlocks For Integrated Keyhead
Transmitter........................................................55
Smart Unlocks For Intelligent Access Keys
................................................................................55
Unlocking the Doors with the Interior Door
Handles...............................................................55
Moonroof Sliding Shade....................................77
Opening and Closing the Moonroof...............77
Venting the Moonroof.........................................77
Motorcraft Parts...........................................234
MyFord Touch™...........................................293
General Information.........................................293
MyKey Troubleshooting...............................52
MyKey™............................................................48
Principle of Operation........................................48
N
Navigation......................................................343
Locks...................................................................54
Luggage Covers.............................................153
cityseekr................................................................345
Map Mode............................................................348
Navigation Map Updates...............................350
Navigation Voice Commands.......................350
Point of Interest (POI) Categories..............345
Quick-touch Buttons.......................................349
Setting a Destination.......................................343
Setting Your Navigation Preferences.........346
Removing the Cover...........................................153
M
Maintenance...................................................177
General Information...........................................177
Technical Specifications................................200
O
Manual Climate Control..............................99
Manual Liftgate...............................................57
Opening and Closing the Liftgate...................57
Opening and Closing the Hood................177
Manual Seats................................................108
Closing the Hood................................................178
Opening the Hood...............................................177
Adjusting the Height of the Driver
Seat....................................................................109
Adjusting the Lumbar Support.....................109
Moving the Seat Backward and
Forward.............................................................108
Recline Adjustment...........................................109
Ordering Additional Owner's
Literature......................................................164
Obtaining a French Owner’s Manual..........164
P
Manual Transmission - 1.6L
EcoBoost™...................................................127
Parking Aid......................................................138
Parking Your Vehicle..........................................128
Recommended Shift Speeds.........................127
Reverse...................................................................128
Using the Clutch..................................................127
Rear Sensing System........................................139
Parking Aids....................................................138
Principle of Operation.......................................138
387
Fiesta (CCT)
Index
Refueling...........................................................121
Parking Brake.................................................134
Easy Fuel™ Capless Fuel System.................121
All Vehicles............................................................135
Vehicles With Automatic
Transmission...................................................134
Vehicles With Manual Transmission...........134
Remote Control..............................................43
Car Finder................................................................47
Integrated Keyhead Transmitter.....................43
Intelligent Access Transmitter........................44
Replacing the Battery.........................................44
Reprogramming the Unlocking
Function..............................................................44
Sounding a Panic Alarm....................................47
Passive Anti-Theft System..........................61
SecuriLock®............................................................61
Perchlorate.........................................................12
Personalized Settings..................................90
Measure Units.......................................................90
Switching Chimes Off........................................90
Removing a Headlamp..............................189
Repairing Minor Paint Damage..............206
Replacement Parts
Recommendation.........................................9
Personal Safety System™..........................33
How Does the Personal Safety System
Work?...................................................................33
Phone...............................................................328
Collision Repairs......................................................9
Scheduled Maintenance and Mechanical
Repairs...................................................................9
Warranty on Replacement Parts....................10
Making Calls........................................................330
Pairing Subsequent Phones..........................329
Pairing Your Phone for the First Time........329
Phone Menu Options.......................................330
Phone Settings...................................................332
Phone Voice Commands................................333
Receiving Calls...................................................330
Text Messaging....................................................331
Replacing a Lost Key or Remote
Control.............................................................47
Reporting Safety Defects (Canada
Only)...............................................................165
Reporting Safety Defects (U.S.
Only)..............................................................164
Roadside Assistance..................................166
Power Steering Fluid Check.....................185
Power Windows..............................................73
Accessory Delay....................................................74
Bounce-Back..........................................................73
One-Touch Down.................................................73
One-Touch Up.......................................................73
Window Lock..........................................................73
Vehicles Sold In Canada : Getting Roadside
Assistance........................................................166
Vehicles Sold In Canada : Using Roadside
Assistance........................................................166
Vehicles Sold In The U.S.: Getting Roadside
Assistance........................................................166
Vehicles Sold In The U.S. : Using Roadside
Assistance........................................................166
R
Rear Seats.......................................................109
Roadside Emergencies..............................166
Running Out of Fuel....................................120
Folding the Seatback.......................................109
Unfolding the Seatback....................................110
Refilling With a Portable Fuel
Container..........................................................120
Rear Under Floor Storage..........................152
Adjustable Load Floor.......................................152
S
Rear View Camera.......................................139
Switching the Rear View Camera Off..........141
Switching the Rear View Camera On.........140
Using the Display................................................140
Vehicles with Parking Aid.................................141
Safety Belt Height Adjustment.................29
Safety Belt Minder.........................................30
Belt-Minder®.........................................................30
Rear Window Wiper and Washers...........67
Safety Belts......................................................26
Intermittent Wipe.................................................67
Rear Window Washer.........................................67
Reverse Gear Wipe...............................................67
Safety Belt Warning Lamp and Indicator
Chime..............................................................30
Principle of Operation........................................26
Conditions of operation.....................................30
388
Fiesta (CCT)
Index
T
Safety Precautions........................................119
Scheduled Maintenance..........................368
Engine Coolant Change Record...................380
Exceptions...........................................................380
General Maintenance Information.............368
Normal Scheduled Maintenance..................371
Special Operating Conditions.......................376
The Better Business Bureau (BBB) Auto
Line Program (U.S. Only)........................162
Tire Care...........................................................210
Glossary of Tire Terminology...........................211
Information About Uniform Tire Quality
Grading..............................................................210
Information Contained on the Tire
Sidewall.............................................................212
Temperature A B C..............................................211
Traction AA A B C.................................................211
Treadwear...............................................................211
Seats.................................................................106
Security...............................................................61
Settings............................................................301
Clock........................................................................301
Display...................................................................302
Settings.................................................................303
Sound.....................................................................302
Vehicle...................................................................303
Tire Pressure Monitoring System...........225
Changing Tires With a Tire Pressure
Monitoring System.......................................226
Understanding Your Tire Pressure
Monitoring System ......................................226
Side Airbags.....................................................39
Side Curtain Airbags.....................................40
Sitting in the Correct Position.................106
Special Notices................................................12
Towing a Trailer.............................................154
Towing the Vehicle on Four
Wheels...........................................................154
New Vehicle Limited Warranty.........................12
Special Instructions..............................................12
Stability Control............................................136
Emergency Towing.............................................154
Recreational Towing..........................................155
Principle of Operation.......................................136
Starting a Gasoline Engine........................116
Towing..............................................................154
Transmission Code Designation............236
Transmission..................................................126
Transporting the Vehicle............................154
Trip Computer.................................................89
Cold or Hot Engine..............................................116
Engine Idle Speed after Starting....................117
Failure to Start.......................................................117
Flooded Engine.....................................................117
Starting and Stopping the Engine...........114
....................................................................................89
General Information...........................................114
U
Steering............................................................144
Electric Power Steering....................................144
Steering Wheel...............................................64
Storage Compartments..............................113
Supplementary Restraints System.........34
Under Hood Overview - 1.0L
EcoBoost.......................................................179
Under Hood Overview - 1.6L Duratec-16V
Ti-VCT (Sigma).........................................180
Under Hood Overview - 1.6L
EcoBoost™...................................................181
Using Cruise Control....................................142
Principle of Operation........................................34
Switching Off the Engine............................117
Vehicles With a Turbocharger.........................117
Symbols Glossary.............................................7
SYNC™ Applications and Services.......272
Switching Cruise Control Off..........................143
Switching Cruise Control On..........................142
911 Assist................................................................272
SYNC AppLink.....................................................278
SYNC Services: Traffic, Directions &
Information (TDI)..........................................275
Vehicle Health Report.......................................274
Using MyKey With Remote Start
Systems..........................................................50
Using Snow Chains.....................................225
Using Stability Control - 1.6L
EcoBoost™...................................................137
SYNC™............................................................257
General Information..........................................257
Switching Sport Mode On................................137
Switching the System Off................................137
SYNC™ Troubleshooting..........................287
389
Fiesta (CCT)
Index
W
Using Stability Control................................137
....................................................................................137
Using SYNC™ With Your Media
Player.............................................................279
Warning Lamps and Indicators - 1.6L
EcoBoost™...................................................82
Accessing Your Play Menu.............................283
Connecting Your Digital Media Player to the
USB Port...........................................................279
Media Menu Features.......................................281
Media Voice Commands.................................279
System Settings.................................................285
What's Playing?.................................................279
Anti-lock Braking System Warning
Lamp....................................................................82
Brake System Warning Lamp..........................82
Cruise Control Indicator.....................................82
Direction Indicator................................................82
Door Ajar Warning Lamp...................................82
Engine Coolant Temperature Warning
Lamp....................................................................83
Engine Oil Warning Lamp.................................83
Engine Warning Lamps......................................83
Front Airbag Warning Lamp.............................83
Front Fog Lamps Indicator...............................83
Headlamp Indicator............................................83
High Beam Indicator...........................................84
Ignition Warning Lamp......................................84
Information Indicator..........................................84
Low Fuel Level Warning Lamp........................84
Low Tire Pressure Warning...............................84
Safety Belt Minder Warning Lamp................84
Service Engine Soon...........................................84
Shift Indicator........................................................84
Using SYNC™ With Your Phone.............261
Accessing Features through the Phone
Menu..................................................................265
Accessing Your Phone Settings...................268
Making Calls........................................................264
Pairing a Phone for the First Time...............262
Pairing Subsequent Phones..........................262
Phone Options during an Active Call.........264
Phone Voice Commands................................262
Receiving Calls...................................................264
System Settings.................................................269
Text Messaging...................................................267
Using Voice Recognition...........................259
Initiating a Voice Session................................259
System Interaction and Feedback..............260
Warning Lamps and Indicators.................79
Using Winter Tires.......................................224
Utilizing the Mediation/Arbitration
Program (Canada Only).........................162
Anti-lock Braking System Warning
Lamp....................................................................79
Brake System Warning Lamp..........................79
Cruise Control Indicator.....................................79
Direction Indicator................................................79
Door Ajar Warning Lamp...................................79
Engine Coolant Temperature Warning
Lamp....................................................................79
Engine Oil Warning Lamp.................................80
Engine Warning Lamps.....................................80
Front Airbag Warning Lamp............................80
Front Fog Lamps Indicator...............................80
Headlamp Indicator............................................80
High Beam Indicator...........................................80
Ignition Warning Lamp........................................81
Information Indicator...........................................81
Low Fuel Level Warning Lamp.........................81
Low Tire Pressure Warning................................81
Safety Belt Minder Warning Lamp.................81
Service Engine Soon............................................81
Shift Indicator.........................................................81
Stability Control Indicator.................................82
V
Vehicle Care...................................................203
Vehicle Certification Label.......................235
Vehicle Identification Number................235
Vehicle Storage............................................208
Battery...................................................................208
Body.......................................................................208
Brakes....................................................................209
Cooling system..................................................208
Engine....................................................................208
Fuel system.........................................................208
General..................................................................208
Miscellaneous.....................................................209
Removing Vehicle From Storage.................209
Tires........................................................................209
Voice Control...................................................65
390
Fiesta (CCT)
Index
Washer Fluid Check.....................................186
Waxing.............................................................204
Wheels and Tires..........................................210
General Information..........................................210
Technical Specifications.................................232
Windows and Mirrors....................................73
Windshield Washers.....................................66
Windshield Wipers........................................66
Intermittent Wipe................................................66
Speed Dependent Wipers................................66
Wipers and Washers....................................66
391
Fiesta (CCT)
392
Fiesta (CCT)