DVIGear DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC Data Sheet

Superior Performance - The DVI-7311 is a low-cost, high performance

DVI Optical Extender capable of transporting high resolution DVI signals up to 500 meters (1,640 ft.). The unit consists of an optical transmitter module that converts the DVI input signals into light pulses for transmission over 4 strands of multi-mode fiber optic cable, and an optical receiver module that converts the light pulses back to a DVI signal for display on a monitor or projector. A programmable memory chip in the transmitter module provides EDID support for any display, thereby eliminating the need for copper cables. These features make the DVI-7311 the ideal solution for all display applications that require flawless DVI signal quality over very long cable runs.

DVI-7311

DVI Fiber Optic Extender, 4x LC

FEATURES

• Supports cable lengths up to 500 meters (1640 ft.)

• Supports HDTV resolutions up to 1080p, and

PC resolutions up to 1920x1200

• Optical fiber transmission is immune to environmental signal noise

• Low RFI / EMI profile for sensitive applications

• User-programmable EDID memory, eliminates the need for DDC connection

• Detachable optical cables greatly simplify installation and maintenance

DVI-7311-TX / RX

Front View

Rear View

Source Device

(e.g. PC or Mac)

DVI-7311-TX*

AC Power Adapter

Display Device

(e.g. Projector)

1 2

3 4

1

2

3

4

DVI-7311-RX*

AC Power Adapter

(optional)

Four fiber, LC Multi-Mode optical cables up to 500m

*HDCP communications are not supported

DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com

DVI-7311

DVI Fiber Optic Extender, 4x LC

SPECIFICATIONS

Performance

Compliance

Maximum Pixel Clock Frequency

Maximum Video Bit Rate

Supported Color Depth

Supported HDTV Formats

Supported PC Resolutions

Digital Audio Support

Connections

DVI Input / DVI Output

Optical

Power Inputs

Optical

Optical Technology / Wavelengths

Optical Wavelength(s)

Optical Transmitter

Optical Receiver

Optical Transmitter Output Power

Optical Receiver Input Sensitivity

Optical Link Power Budget

Cable

Fiber Cable Type / Max. Length

DVIGear Fiber Cable

Cable Jacket

Cable Outside Diameter

DDC Support

EDID Support

HDCP Support

Mechanical

Construction

Dimensions (L x W x H)

Net Weight

Environmental

Temperature

Humidity

Power Requirements

DVI v1.0

165 MHz

1.65 Gbps (single-link)

8-bit

480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2048x1080

Up to 1600x1200 and 1920x1200

None

1x 18+1 DVI-D male connector

4x LC fiber optic connectors

1x 3.5mm jack

4x Discrete Optical Channels

850 nm

Tx Module: 4x 850 nm VCSEL, Class 1 laser product

Rx Module: 4x GaAs PIN Photo Diodes

-8 dBm (minimum) / -3 dBm (maximum)

-18.5 dBm (minimum) / -3 dBm (maximum)

9.0 dB (minimum)

50/125μ LC Multi-Mode Fiber with 4x LC connectors / 500 meters

OFNP, Plenum Rated - additional data and custom lengths available on request

OFNP, Plenum Rated, Black PVC Jacket

5.0 mm

An EDID memory built into the Tx module can learn and store the display’s EDID info.

HDCP communications are  NOT supported!

High-impact plastic enclosure with black satin finish

2.5” x 1.7” x 0.6” (64.2 mm x 42.6 mm x 15.9 mm)

DVI-7311-TX: 1 oz. (28 g) DVI-7311-RX: 1 oz. (28 g)

Operating: 32° to +158° F (0° to +70°C)

Operating: 5% to 80% (non-condensing)

Storage: -40° to +185° F (-40° to +85°C)

Storage: 5% to 95% (non-condensing)

Optical Transmitter

Tx module requires at least 320 ma of DC current from pin 14 of DVI (source) connector.

Optional external power supply may be used if needed.

Optical Receiver

External AC Power Adapter

Power Consumption

Regulatory Approvals

Fiber Optic Extender Unit

AC Power Adapter

Warranty

Limited Warranty

Model Numbers

DVI-7311

DVI-7311-TX

DVI-7311-RX

DVI-CUST-OPT

Accessories Included

Must be powered using the supplied external power supply

Input: 100-240VAC / 50-60Hz 0.2A Output: 5VDC, 3.0A

DVI-7311-TX: 1.6 watts DVI-7311-RX: 1.4 watts

FCC, CE, RoHS

FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS

3 Years Parts and Labor

DVI Single-Link Fiber Optic Extender, 4x LC

DVI Single-Link Fiber Optic Transmitter, 4x LC

DVI Single-Link Fiber Optic Receiver, 4x LC

4x LC, Plenum-rated, Single-Link DVI Fiber Optic Cable (length must be specified)

1x External AC Power Adapter with USA plug, 1x User Guide

Optional Accessories

External AC Power Adapter (with USA, Euro, UK, or Australia plugs) for DVI-7311-TX Transmitter unit

2 DVIGear • 1059 Triad Court, Suite 8, Marietta, GA 30062 • Tel: 770.421.6699 • Toll Free: 888.463.9927 • Fax: 770.234.4207 • [email protected] • www.dvigear.com